From 2bd50dd800b52245294cfceb56be62020cdc7515 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 21 Aug 2010 01:57:39 +0200 Subject: PCI: PCIe: Disable PCIe port services during port initialization In principle PCIe port services may be enabled by the BIOS, so it's better to disable them during port initialization to avoid spurious events from being generated. Signed-off-by: Rafael J. Wysocki Reviewed-by: Hidetoshi Seto Signed-off-by: Jesse Barnes --- drivers/pci/pcie/portdrv_core.c | 29 ++++++++++++++++++++++++++--- 1 file changed, 26 insertions(+), 3 deletions(-) (limited to 'drivers/pci/pcie') diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index d0245c83b621..a9c222d79ebc 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -259,20 +259,43 @@ static int get_port_device_capability(struct pci_dev *dev) /* Hot-Plug Capable */ if ((cap_mask & PCIE_PORT_SERVICE_HP) && (reg16 & PCI_EXP_FLAGS_SLOT)) { pci_read_config_dword(dev, pos + PCI_EXP_SLTCAP, ®32); - if (reg32 & PCI_EXP_SLTCAP_HPC) + if (reg32 & PCI_EXP_SLTCAP_HPC) { services |= PCIE_PORT_SERVICE_HP; + /* + * Disable hot-plug interrupts in case they have been + * enabled by the BIOS and the hot-plug service driver + * is not loaded. + */ + pos += PCI_EXP_SLTCTL; + pci_read_config_word(dev, pos, ®16); + reg16 &= ~(PCI_EXP_SLTCTL_CCIE | PCI_EXP_SLTCTL_HPIE); + pci_write_config_word(dev, pos, reg16); + } } /* AER capable */ if ((cap_mask & PCIE_PORT_SERVICE_AER) - && pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR)) + && pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR)) { services |= PCIE_PORT_SERVICE_AER; + /* + * Disable AER on this port in case it's been enabled by the + * BIOS (the AER service driver will enable it when necessary). + */ + pci_disable_pcie_error_reporting(dev); + } /* VC support */ if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_VC)) services |= PCIE_PORT_SERVICE_VC; /* Root ports are capable of generating PME too */ if ((cap_mask & PCIE_PORT_SERVICE_PME) - && dev->pcie_type == PCI_EXP_TYPE_ROOT_PORT) + && dev->pcie_type == PCI_EXP_TYPE_ROOT_PORT) { services |= PCIE_PORT_SERVICE_PME; + /* + * Disable PME interrupt on this port in case it's been enabled + * by the BIOS (the PME service driver will enable it when + * necessary). + */ + pcie_pme_interrupt_enable(dev, false); + } return services; } -- cgit v1.2.3