From 21e2b0a5efb3a01de58e7cb630f2eb70894da352 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Thu, 8 May 2008 14:37:25 +0900 Subject: PCI ACPI: fix uninitialized variable in __pci_osc_support_set Fix uninitialized variable in __pci_osc_support_set(). If the ACPI namespace doesn't have any device object corresponding to the specified hid, 'retval' in __pci_osc_support_set() is not changed by the acpi_query_osc() callback. Since 'retval' is not initizlized in the current implementation, the contents of 'retval' is undefined in this case. This causes a mis-handling of ctrlset_buf[OSC_SUPPORT_TYPE] and will cause an unexpected result in the subsequent pci_osc_control_set() call as a result. Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes --- drivers/pci/pci-acpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 72f7476930c8..ddfd756fc8ed 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -166,7 +166,7 @@ run_osc_out: acpi_status __pci_osc_support_set(u32 flags, const char *hid) { u32 temp; - acpi_status retval; + acpi_status retval = AE_NOT_FOUND; if (!(flags & OSC_SUPPORT_MASKS)) { return AE_TYPE; -- cgit v1.2.3 From a5d1c8798309a384c2776e5ff472f8ceb6d9065d Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Mon, 12 May 2008 10:48:10 +0800 Subject: ACPI/PCI: handle multiple _OSC There is an IA64 system here which have two pci root bridges with _OSC. One _OSC disables SHPC control bit but the other not. Below patch makes _OSC data per-device instead of one global, otherwise linux takes both root bridges don't support SHPC. Signed-off-by: Shaohua Li Signed-off-by: Jesse Barnes --- drivers/pci/pci-acpi.c | 95 +++++++++++++++++++++++++++++++++++--------------- 1 file changed, 66 insertions(+), 29 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index ddfd756fc8ed..468d13e1458e 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -19,8 +19,31 @@ #include #include "pci.h" -static u32 ctrlset_buf[3] = {0, 0, 0}; -static u32 global_ctrlsets = 0; +struct acpi_osc_data { + acpi_handle handle; + u32 ctrlset_buf[3]; + u32 global_ctrlsets; + struct list_head sibiling; +}; +static LIST_HEAD(acpi_osc_data_list); + +static struct acpi_osc_data *acpi_get_osc_data(acpi_handle handle) +{ + struct acpi_osc_data *data; + + list_for_each_entry(data, &acpi_osc_data_list, sibiling) { + if (data->handle == handle) + return data; + } + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return NULL; + INIT_LIST_HEAD(&data->sibiling); + data->handle = handle; + list_add_tail(&data->sibiling, &acpi_osc_data_list); + return data; +} + static u8 OSC_UUID[16] = {0x5B, 0x4D, 0xDB, 0x33, 0xF7, 0x1F, 0x1C, 0x40, 0x96, 0x57, 0x74, 0x41, 0xC0, 0x3D, 0xD7, 0x66}; static acpi_status @@ -37,8 +60,21 @@ acpi_query_osc ( union acpi_object *out_obj; u32 osc_dw0; acpi_status *ret_status = (acpi_status *)retval; + struct acpi_osc_data *osc_data = acpi_get_osc_data(handle); + u32 flags = (unsigned long)context, temp; + + if (!osc_data) { + printk(KERN_ERR "acpi osc data array is full\n"); + return AE_ERROR; + } + + osc_data->ctrlset_buf[OSC_SUPPORT_TYPE] |= (flags & OSC_SUPPORT_MASKS); + + /* do _OSC query for all possible controls */ + temp = osc_data->ctrlset_buf[OSC_CONTROL_TYPE]; + osc_data->ctrlset_buf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE; + osc_data->ctrlset_buf[OSC_CONTROL_TYPE] = OSC_CONTROL_MASKS; - /* Setting up input parameters */ input.count = 4; input.pointer = in_params; @@ -51,13 +87,11 @@ acpi_query_osc ( in_params[2].integer.value = 3; in_params[3].type = ACPI_TYPE_BUFFER; in_params[3].buffer.length = 12; - in_params[3].buffer.pointer = (u8 *)context; + in_params[3].buffer.pointer = (u8 *)osc_data->ctrlset_buf; status = acpi_evaluate_object(handle, "_OSC", &input, &output); - if (ACPI_FAILURE (status)) { - *ret_status = status; - return status; - } + if (ACPI_FAILURE(status)) + goto out_nofree; out_obj = output.pointer; if (out_obj->type != ACPI_TYPE_BUFFER) { @@ -76,7 +110,8 @@ acpi_query_osc ( printk(KERN_DEBUG "_OSC invalid revision\n"); if (osc_dw0 & OSC_CAPABILITIES_MASK_ERROR) { /* Update Global Control Set */ - global_ctrlsets = *((u32 *)(out_obj->buffer.pointer+8)); + osc_data->global_ctrlsets = + *((u32 *)(out_obj->buffer.pointer + 8)); status = AE_OK; goto query_osc_out; } @@ -85,12 +120,21 @@ acpi_query_osc ( } /* Update Global Control Set */ - global_ctrlsets = *((u32 *)(out_obj->buffer.pointer + 8)); + osc_data->global_ctrlsets = *((u32 *)(out_obj->buffer.pointer + 8)); status = AE_OK; query_osc_out: kfree(output.pointer); +out_nofree: *ret_status = status; + + osc_data->ctrlset_buf[OSC_QUERY_TYPE] = !OSC_QUERY_ENABLE; + osc_data->ctrlset_buf[OSC_CONTROL_TYPE] = temp; + if (ACPI_FAILURE(status)) { + /* no osc support at all */ + osc_data->ctrlset_buf[OSC_SUPPORT_TYPE] = 0; + } + return status; } @@ -165,28 +209,15 @@ run_osc_out: **/ acpi_status __pci_osc_support_set(u32 flags, const char *hid) { - u32 temp; acpi_status retval = AE_NOT_FOUND; if (!(flags & OSC_SUPPORT_MASKS)) { return AE_TYPE; } - ctrlset_buf[OSC_SUPPORT_TYPE] |= (flags & OSC_SUPPORT_MASKS); - - /* do _OSC query for all possible controls */ - temp = ctrlset_buf[OSC_CONTROL_TYPE]; - ctrlset_buf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE; - ctrlset_buf[OSC_CONTROL_TYPE] = OSC_CONTROL_MASKS; acpi_get_devices(hid, acpi_query_osc, - ctrlset_buf, + (void *)(unsigned long)flags, (void **) &retval ); - ctrlset_buf[OSC_QUERY_TYPE] = !OSC_QUERY_ENABLE; - ctrlset_buf[OSC_CONTROL_TYPE] = temp; - if (ACPI_FAILURE(retval)) { - /* no osc support at all */ - ctrlset_buf[OSC_SUPPORT_TYPE] = 0; - } return AE_OK; } @@ -201,19 +232,25 @@ acpi_status pci_osc_control_set(acpi_handle handle, u32 flags) { acpi_status status; u32 ctrlset; + struct acpi_osc_data *osc_data = acpi_get_osc_data(handle); + + if (!osc_data) { + printk(KERN_ERR "acpi osc data array is full\n"); + return AE_ERROR; + } ctrlset = (flags & OSC_CONTROL_MASKS); if (!ctrlset) { return AE_TYPE; } - if (ctrlset_buf[OSC_SUPPORT_TYPE] && - ((global_ctrlsets & ctrlset) != ctrlset)) { + if (osc_data->ctrlset_buf[OSC_SUPPORT_TYPE] && + ((osc_data->global_ctrlsets & ctrlset) != ctrlset)) { return AE_SUPPORT; } - ctrlset_buf[OSC_CONTROL_TYPE] |= ctrlset; - status = acpi_run_osc(handle, ctrlset_buf); + osc_data->ctrlset_buf[OSC_CONTROL_TYPE] |= ctrlset; + status = acpi_run_osc(handle, osc_data->ctrlset_buf); if (ACPI_FAILURE (status)) { - ctrlset_buf[OSC_CONTROL_TYPE] &= ~ctrlset; + osc_data->ctrlset_buf[OSC_CONTROL_TYPE] &= ~ctrlset; } return status; -- cgit v1.2.3 From 34a65055e5e7304b3d6ad0f7542bf66308eae50a Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Mon, 12 May 2008 22:55:45 +0900 Subject: ACPI/PCI: handle multiple _OSC The pci_osc_control_set() function can be called for the ACPI object that doesn't have _OSC method. In this case, acpi_get_osc_data() would allocate a useless memory region. To avoid this, we need to check the existence of _OSC before calling acpi_get_osc_data(). Here is a patch to fix this problem in pci_osc_control_set. Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes --- drivers/pci/pci-acpi.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 468d13e1458e..38fc8b1ff881 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -232,8 +232,14 @@ acpi_status pci_osc_control_set(acpi_handle handle, u32 flags) { acpi_status status; u32 ctrlset; - struct acpi_osc_data *osc_data = acpi_get_osc_data(handle); + acpi_handle tmp; + struct acpi_osc_data *osc_data; + + status = acpi_get_handle(handle, "_OSC", &tmp); + if (ACPI_FAILURE(status)) + return status; + osc_data = acpi_get_osc_data(handle); if (!osc_data) { printk(KERN_ERR "acpi osc data array is full\n"); return AE_ERROR; -- cgit v1.2.3 From a7eb08c2a14f28cb652ea6ad1a8e2b8efc55fb9a Mon Sep 17 00:00:00 2001 From: mark gross Date: Mon, 12 May 2008 13:41:57 -0700 Subject: PCI: Make the intel-iommu_wait_op macro work when jiffies are not running The following patch changes the intel-iommu.c code to use the TSC instead of jiffies for detecting bad DMAR functionality. Some systems with bad bios's have been seen to hang in early boot spinning in the IOMMU_WAIT_IO macro. This patch will replace the infinite loop with a call to panic. Signed-off-by: Mark Gross Signed-off-by: Jesse Barnes --- drivers/pci/intel-iommu.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 1fd8bb765702..66c0fd21894b 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -49,7 +49,7 @@ #define DEFAULT_DOMAIN_ADDRESS_WIDTH 48 -#define DMAR_OPERATION_TIMEOUT (HZ*60) /* 1m */ +#define DMAR_OPERATION_TIMEOUT ((cycles_t) tsc_khz*10*1000) /* 10sec */ #define DOMAIN_MAX_ADDR(gaw) ((((u64)1) << gaw) - 1) @@ -490,12 +490,12 @@ static int iommu_alloc_root_entry(struct intel_iommu *iommu) #define IOMMU_WAIT_OP(iommu, offset, op, cond, sts) \ {\ - unsigned long start_time = jiffies;\ + cycles_t start_time = get_cycles();\ while (1) {\ sts = op (iommu->reg + offset);\ if (cond)\ break;\ - if (time_after(jiffies, start_time + DMAR_OPERATION_TIMEOUT))\ + if (DMAR_OPERATION_TIMEOUT < (get_cycles() - start_time))\ panic("DMAR hardware is malfunctioning\n");\ cpu_relax();\ }\ -- cgit v1.2.3 From 439a7733e8fcbaee39979c10246101565834d6b2 Mon Sep 17 00:00:00 2001 From: Björn Krombholz Date: Mon, 12 May 2008 00:24:27 +0200 Subject: PCI: enable nv_msi_ht_cap_quirk for ALi bridges MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This applies the NVidia MSI enabled flag for HT capable devices quirk to ALi bridges as well. As described in more detail in http://bugzilla.kernel.org/show_bug.cgi?id=10667 this is required for my board which is using an nForce 3 250Gb chipset with an ALi M1695 northbridge. It fixes a regression introduced in 2.6.24 that made the internal NIC of the board unusable (MSI initialisation of the NIC but disabled MSI on the northbridge devices. Signed-off-by: Björn Krombholz Signed-off-by: Jesse Barnes --- drivers/pci/quirks.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/pci') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index afd914ebe215..f2d9c770f51a 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1826,6 +1826,7 @@ static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev) } } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk); static void __devinit quirk_msi_intx_disable_bug(struct pci_dev *dev) { -- cgit v1.2.3 From c4e5fadd2a6fc0da465dcde761877d9a87313b33 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Tue, 13 May 2008 16:48:50 +0900 Subject: ACPI/PCI: another multiple _OSC memory leak fix The acpi_query_osc() function can be called for the ACPI object that doesn't have _OSC method. In this case, acpi_get_osc_data() would allocate a useless memory region. To avoid this, we need to check the existence of _OSC before calling acpi_get_osc_data() in acpi_query_osc(). Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes --- drivers/pci/pci-acpi.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 38fc8b1ff881..9d6fc8e6285d 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -60,9 +60,15 @@ acpi_query_osc ( union acpi_object *out_obj; u32 osc_dw0; acpi_status *ret_status = (acpi_status *)retval; - struct acpi_osc_data *osc_data = acpi_get_osc_data(handle); + struct acpi_osc_data *osc_data; u32 flags = (unsigned long)context, temp; + acpi_handle tmp; + status = acpi_get_handle(handle, "_OSC", &tmp); + if (ACPI_FAILURE(status)) + return status; + + osc_data = acpi_get_osc_data(handle); if (!osc_data) { printk(KERN_ERR "acpi osc data array is full\n"); return AE_ERROR; -- cgit v1.2.3 From a442ac512f36981182e66a427ad05f449ff6593b Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 15 May 2008 17:50:37 -0700 Subject: Clean up 'print_fn_descriptor_symbol()' types Everybody wants to pass it a function pointer, and in fact, that is what you _must_ pass it for it to make sense (since it knows that ia64 and ppc64 use descriptors for function pointers and fetches the actual address from there). So don't make the argument be a 'unsigned long' and force everybody to add a cast. Signed-off-by: Linus Torvalds --- drivers/base/power/main.c | 2 +- drivers/pci/quirks.c | 3 +-- drivers/pnp/quirks.c | 3 +-- include/linux/kallsyms.h | 24 ++++++++++++++---------- init/main.c | 9 +++------ 5 files changed, 20 insertions(+), 21 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 7b76fd3b93a4..45cc3d9eacb8 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -418,7 +418,7 @@ void __suspend_report_result(const char *function, void *fn, int ret) { if (ret) { printk(KERN_ERR "%s(): ", function); - print_fn_descriptor_symbol("%s() returns ", (unsigned long)fn); + print_fn_descriptor_symbol("%s returns ", fn); printk("%d\n", ret); } } diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index f2d9c770f51a..dabb563f51d9 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1503,8 +1503,7 @@ static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_f (f->device == dev->device || f->device == (u16) PCI_ANY_ID)) { #ifdef DEBUG dev_dbg(&dev->dev, "calling "); - print_fn_descriptor_symbol("%s()\n", - (unsigned long) f->hook); + print_fn_descriptor_symbol("%s\n", f->hook); #endif f->hook(dev); } diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c index ffdb12a59c40..e2b7de4cb05e 100644 --- a/drivers/pnp/quirks.c +++ b/drivers/pnp/quirks.c @@ -331,8 +331,7 @@ void pnp_fixup_device(struct pnp_dev *dev) continue; #ifdef DEBUG dev_dbg(&dev->dev, "%s: calling ", f->id); - print_fn_descriptor_symbol("%s\n", - (unsigned long) f->quirk_function); + print_fn_descriptor_symbol("%s\n", f->quirk_function); #endif f->quirk_function(dev); } diff --git a/include/linux/kallsyms.h b/include/linux/kallsyms.h index 82de2fb62cb7..00c1801099fa 100644 --- a/include/linux/kallsyms.h +++ b/include/linux/kallsyms.h @@ -83,16 +83,6 @@ __attribute__((format(printf,1,2))); static inline void __check_printsym_format(const char *fmt, ...) { } -/* ia64 and ppc64 use function descriptors, which contain the real address */ -#if defined(CONFIG_IA64) || defined(CONFIG_PPC64) -#define print_fn_descriptor_symbol(fmt, addr) \ -do { \ - unsigned long *__faddr = (unsigned long*) addr; \ - print_symbol(fmt, __faddr[0]); \ -} while (0) -#else -#define print_fn_descriptor_symbol(fmt, addr) print_symbol(fmt, addr) -#endif static inline void print_symbol(const char *fmt, unsigned long addr) { @@ -101,6 +91,20 @@ static inline void print_symbol(const char *fmt, unsigned long addr) __builtin_extract_return_addr((void *)addr)); } +/* + * Pretty-print a function pointer. + * + * ia64 and ppc64 function pointers are really function descriptors, + * which contain a pointer the real address. + */ +static inline void print_fn_descriptor_symbol(const char *fmt, void *addr) +{ +#if defined(CONFIG_IA64) || defined(CONFIG_PPC64) + addr = *(void **)addr; +#endif + print_symbol(fmt, (unsigned long)addr); +} + #ifndef CONFIG_64BIT #define print_ip_sym(ip) \ do { \ diff --git a/init/main.c b/init/main.c index f406fefa626c..c62215146a80 100644 --- a/init/main.c +++ b/init/main.c @@ -706,8 +706,7 @@ static void __init do_initcalls(void) int result; if (initcall_debug) { - print_fn_descriptor_symbol("calling %s()\n", - (unsigned long) *call); + print_fn_descriptor_symbol("calling %s\n", *call); t0 = ktime_get(); } @@ -717,8 +716,7 @@ static void __init do_initcalls(void) t1 = ktime_get(); delta = ktime_sub(t1, t0); - print_fn_descriptor_symbol("initcall %s()", - (unsigned long) *call); + print_fn_descriptor_symbol("initcall %s", *call); printk(" returned %d after %Ld msecs\n", result, (unsigned long long) delta.tv64 >> 20); } @@ -737,8 +735,7 @@ static void __init do_initcalls(void) local_irq_enable(); } if (msgbuf[0]) { - print_fn_descriptor_symbol(KERN_WARNING "initcall %s()", - (unsigned long) *call); + print_fn_descriptor_symbol(KERN_WARNING "initcall %s", *call); printk(" returned with %s\n", msgbuf); } } -- cgit v1.2.3 From ddc9753fcddfe5f9885dc133824962c047252b43 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Wed, 21 May 2008 16:58:40 +0800 Subject: PCI: don't enable ASPM on devices with mixed PCIe/PCI functions The Slot 03:00.* of JMicron controller has two functions, but one is PCIE endpoint the other isn't PCIE device, very strange. PCIE spec defines all functions should have the same config for ASPM, so disable ASPM for the whole slot in this case. Signed-off-by: Shaohua Li Signed-off-by: Jesse Barnes --- drivers/pci/pcie/aspm.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'drivers/pci') diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 61fedb2448b6..f82495583e63 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -506,6 +506,23 @@ static void free_link_state(struct pci_dev *pdev) pdev->link_state = NULL; } +static int pcie_aspm_sanity_check(struct pci_dev *pdev) +{ + struct pci_dev *child_dev; + int child_pos; + + /* + * Some functions in a slot might not all be PCIE functions, very + * strange. Disable ASPM for the whole slot + */ + list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) { + child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP); + if (!child_pos) + return -EINVAL; + } + return 0; +} + /* * pcie_aspm_init_link_state: Initiate PCI express link state. * It is called after the pcie and its children devices are scaned. @@ -526,6 +543,9 @@ void pcie_aspm_init_link_state(struct pci_dev *pdev) if (list_empty(&pdev->subordinate->devices)) goto out; + if (pcie_aspm_sanity_check(pdev)) + goto out; + mutex_lock(&aspm_lock); link_state = kzalloc(sizeof(*link_state), GFP_KERNEL); -- cgit v1.2.3 From 4efeb4dd3c0bf534e431a8e7c72d0afbd4cd24aa Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 12 May 2008 21:21:05 +0200 Subject: PCI: use dev_to_node in pci_call_probe to make sure get one online node. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- drivers/pci/pci-driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 72cf61ed8f96..e1637bd82b8e 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -181,7 +181,7 @@ static int pci_call_probe(struct pci_driver *drv, struct pci_dev *dev, any need to change it. */ struct mempolicy *oldpol; cpumask_t oldmask = current->cpus_allowed; - int node = pcibus_to_node(dev->bus); + int node = dev_to_node(&dev->dev); if (node >= 0) { node_to_cpumask_ptr(nodecpumask, node); -- cgit v1.2.3 From b3bd307c628af2f0a581c42d5d7e4bcdbbf64b6a Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Tue, 27 May 2008 19:08:23 +0900 Subject: shpchp: add message about shpchp_slot_with_bus option Some (broken?) platform assign the same slot name to multiple hotplug slots. On such system, slot initialization would fail because of name collision. The shpchp driver already have a "slot_with_bus" module option which adds the bus number into the slot name. This patch adds the message about this module option that will be displayed when slot name collision is detected. Signed-off-by: Kenji Kaneshige Signed-off-by: Kristen Carlson Accardi Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/shpchp_core.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index 1648076600fc..97848654652a 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -162,6 +162,10 @@ static int init_slots(struct controller *ctrl) retval = pci_hp_register(slot->hotplug_slot); if (retval) { err("pci_hp_register failed with error %d\n", retval); + if (retval == -EEXIST) + err("Failed to register slot because of name " + "collision. Try \'shpchp_slot_with_bus\' " + "module option.\n"); goto error_info; } -- cgit v1.2.3 From dbd79aed1aea2bece0bf43cc2ff3b2f9baf48a08 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Tue, 27 May 2008 19:03:16 +0900 Subject: pciehp: fix NULL dereference in interrupt handler Fix the following NULL dereference problem reported from Pierre Ossman and Ingo Molnar. pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0 pciehp: pciehp_find_slot: slot (device=0x0) not found BUG: unable to handle kernel NULL pointer dereference at 0000000000000070 IP: [] pciehp_handle_presence_change+0x7e/0x113 PGD 0 Oops: 0000 [1] CPU 0 Modules linked in: Pid: 1, comm: swapper Tainted: G W 2.6.26-rc3-sched-devel.git-00001-g2b99b26-dirty #170 RIP: 0010:[] [] pciehp_handle_presence_change+0x7e/0x113 RSP: 0000:ffff81003f83fbb0 EFLAGS: 00010046 RAX: 0000000000000039 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000046 RBP: ffff81003f83fbd0 R08: 0000000000000001 R09: ffffffff80245103 R10: 0000000000000020 R11: 0000000000000000 R12: ffff81003ea53a30 R13: 0000000000000000 R14: 0000000000000011 R15: ffffffff80495926 FS: 0000000000000000(0000) GS:ffffffff80be7400(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000070 CR3: 0000000000201000 CR4: 00000000000006a0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff81003f83e000, task ffff81003f840000) Stack: 0000000000000008 ffff81003f83fbf6 ffff81003ea53a30 0000000000000008 ffff81003f83fc10 ffffffff80495ab4 0000000000000011 0000000000000002 0000000000000202 0000000000000202 00000000fffffff4 ffff81003ea53a30 Call Trace: [] pcie_isr+0x18e/0x1bc [] request_irq+0x106/0x12f [] pcie_init+0x15e/0x6cc [] pciehp_probe+0x64/0x541 [] pcie_port_probe_service+0x4c/0x76 [] driver_probe_device+0xd4/0x1f0 [] __driver_attach+0x7c/0x7e [] ? __driver_attach+0x0/0x7e [] bus_for_each_dev+0x53/0x7d [] driver_attach+0x1c/0x1e [] bus_add_driver+0xdd/0x25b [] ? pcied_init+0x0/0x8b [] driver_register+0x5f/0x13e [] ? pcied_init+0x0/0x8b [] pcie_port_service_register+0x47/0x49 [] pcied_init+0x15/0x8b [] kernel_init+0x75/0x243 [] ? _spin_unlock_irq+0x2b/0x3a [] ? finish_task_switch+0x57/0x9a [] child_rip+0xa/0x12 [] ? restore_args+0x0/0x30 [] ? kernel_init+0x0/0x243 [] ? child_rip+0x0/0x12 Code: 83 80 00 00 00 48 39 f0 75 e1 0f b6 c9 48 c7 c2 00 0e 8d 80 48 c7 c6 8a 60 a6 80 48 c7 c7 10 db a8 80 31 c0 e8 3f 8d d9 ff 31 db <48> 8b 43 70 48 8d 75 ef 48 89 df ff 50 30 80 7d ef 00 74 37 48 RIP [] pciehp_handle_presence_change+0x7e/0x113 RSP CR2: 0000000000000070 Kernel panic - not syncing: Fatal exception The situation under which it occurs is hw and timing related: it appears to happen on a system that has PCI hotplug hardware but with no active hotplug cards, and another interrupt in the same (shared) IRQ line arrives too early, before the hotplug-slot entry has been set up - as triggered by CONFIG_DEBUG_SHIRQ=y: This patch contains the following two fixes. (1) Clear all events bits in Slot Status register to prevent the pciehp driver from detecting the spurious events that would have been occur before pciehp loading. (2) Add check whether slot initialization had been already done. This is short term fix. We need more structural fixes to install interrupt handler after slot initialization is done. Signed-off-by: Ingo Molnar Signed-off-by: Kenji Kaneshige Signed-off-by: Kristen Carlson Accardi Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp.h | 8 ++++---- drivers/pci/hotplug/pciehp_ctrl.c | 22 +++++--------------- drivers/pci/hotplug/pciehp_hpc.c | 42 ++++++++++++++++++++++++++------------- 3 files changed, 37 insertions(+), 35 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index 8264a7680435..920091c4b18d 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -146,10 +146,10 @@ struct controller { extern int pciehp_sysfs_enable_slot(struct slot *slot); extern int pciehp_sysfs_disable_slot(struct slot *slot); -extern u8 pciehp_handle_attention_button(u8 hp_slot, struct controller *ctrl); -extern u8 pciehp_handle_switch_change(u8 hp_slot, struct controller *ctrl); -extern u8 pciehp_handle_presence_change(u8 hp_slot, struct controller *ctrl); -extern u8 pciehp_handle_power_fault(u8 hp_slot, struct controller *ctrl); +extern u8 pciehp_handle_attention_button(struct slot *p_slot); + extern u8 pciehp_handle_switch_change(struct slot *p_slot); +extern u8 pciehp_handle_presence_change(struct slot *p_slot); +extern u8 pciehp_handle_power_fault(struct slot *p_slot); extern int pciehp_configure_device(struct slot *p_slot); extern int pciehp_unconfigure_device(struct slot *p_slot); extern void pciehp_queue_pushbutton_work(struct work_struct *work); diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index 0a7aa628e955..7ad8a7dbc1a4 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -55,16 +55,13 @@ static int queue_interrupt_event(struct slot *p_slot, u32 event_type) return 0; } -u8 pciehp_handle_attention_button(u8 hp_slot, struct controller *ctrl) +u8 pciehp_handle_attention_button(struct slot *p_slot) { - struct slot *p_slot; u32 event_type; /* Attention Button Change */ dbg("pciehp: Attention button interrupt received.\n"); - p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); - /* * Button pressed - See if need to TAKE ACTION!!! */ @@ -76,18 +73,15 @@ u8 pciehp_handle_attention_button(u8 hp_slot, struct controller *ctrl) return 0; } -u8 pciehp_handle_switch_change(u8 hp_slot, struct controller *ctrl) +u8 pciehp_handle_switch_change(struct slot *p_slot) { - struct slot *p_slot; u8 getstatus; u32 event_type; /* Switch Change */ dbg("pciehp: Switch interrupt received.\n"); - p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); - if (getstatus) { /* * Switch opened @@ -107,17 +101,14 @@ u8 pciehp_handle_switch_change(u8 hp_slot, struct controller *ctrl) return 1; } -u8 pciehp_handle_presence_change(u8 hp_slot, struct controller *ctrl) +u8 pciehp_handle_presence_change(struct slot *p_slot) { - struct slot *p_slot; u32 event_type; u8 presence_save; /* Presence Change */ dbg("pciehp: Presence/Notify input change.\n"); - p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); - /* Switch is open, assume a presence change * Save the presence state */ @@ -141,16 +132,13 @@ u8 pciehp_handle_presence_change(u8 hp_slot, struct controller *ctrl) return 1; } -u8 pciehp_handle_power_fault(u8 hp_slot, struct controller *ctrl) +u8 pciehp_handle_power_fault(struct slot *p_slot) { - struct slot *p_slot; u32 event_type; /* power fault */ dbg("pciehp: Power fault interrupt received.\n"); - p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); - if ( !(p_slot->hpc_ops->query_power_fault(p_slot))) { /* * power fault Cleared @@ -163,7 +151,7 @@ u8 pciehp_handle_power_fault(u8 hp_slot, struct controller *ctrl) */ info("Power fault on Slot(%s)\n", p_slot->name); event_type = INT_POWER_FAULT; - info("power fault bit %x set\n", hp_slot); + info("power fault bit %x set\n", 0); } queue_interrupt_event(p_slot, event_type); diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 891f81a0400c..425a0f609977 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -722,6 +722,7 @@ static irqreturn_t pcie_isr(int irq, void *dev_id) { struct controller *ctrl = (struct controller *)dev_id; u16 detected, intr_loc; + struct slot *p_slot; /* * In order to guarantee that all interrupt events are @@ -756,21 +757,38 @@ static irqreturn_t pcie_isr(int irq, void *dev_id) wake_up_interruptible(&ctrl->queue); } + if (!(intr_loc & ~CMD_COMPLETED)) + return IRQ_HANDLED; + + /* + * Return without handling events if this handler routine is + * called before controller initialization is done. This may + * happen if hotplug event or another interrupt that shares + * the IRQ with pciehp arrives before slot initialization is + * done after interrupt handler is registered. + * + * FIXME - Need more structural fixes. We need to be ready to + * handle the event before installing interrupt handler. + */ + p_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset); + if (!p_slot || !p_slot->hpc_ops) + return IRQ_HANDLED; + /* Check MRL Sensor Changed */ if (intr_loc & MRL_SENS_CHANGED) - pciehp_handle_switch_change(0, ctrl); + pciehp_handle_switch_change(p_slot); /* Check Attention Button Pressed */ if (intr_loc & ATTN_BUTTN_PRESSED) - pciehp_handle_attention_button(0, ctrl); + pciehp_handle_attention_button(p_slot); /* Check Presence Detect Changed */ if (intr_loc & PRSN_DETECT_CHANGED) - pciehp_handle_presence_change(0, ctrl); + pciehp_handle_presence_change(p_slot); /* Check Power Fault Detected */ if (intr_loc & PWR_FAULT_DETECTED) - pciehp_handle_power_fault(0, ctrl); + pciehp_handle_power_fault(p_slot); return IRQ_HANDLED; } @@ -1028,6 +1046,12 @@ static int pciehp_acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev) static int pcie_init_hardware_part1(struct controller *ctrl, struct pcie_device *dev) { + /* Clear all remaining event bits in Slot Status register */ + if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f)) { + err("%s: Cannot write to SLOTSTATUS register\n", __func__); + return -1; + } + /* Mask Hot-plug Interrupt Enable */ if (pcie_write_cmd(ctrl, 0, HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE)) { err("%s: Cannot mask hotplug interrupt enable\n", __func__); @@ -1040,16 +1064,6 @@ int pcie_init_hardware_part2(struct controller *ctrl, struct pcie_device *dev) { u16 cmd, mask; - /* - * We need to clear all events before enabling hotplug interrupt - * notification mechanism in order for hotplug controler to - * generate interrupts. - */ - if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f)) { - err("%s: Cannot write to SLOTSTATUS register\n", __FUNCTION__); - return -1; - } - cmd = PRSN_DETECT_ENABLE; if (ATTN_BUTTN(ctrl)) cmd |= ATTN_BUTTN_ENABLE; -- cgit v1.2.3 From 5808639bfa98d69f77a481d759570d85f164fea0 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Tue, 27 May 2008 19:04:30 +0900 Subject: pciehp: fix slow probing Fix the "pciehp probing slow" problem reported from Jan C. Nordholz in http://bugzilla.kernel.org/show_bug.cgi?id=10751. The command completed bit in Slot Status register applies only to commands issued to control the attention indicator, power indicator, power controller, or electromechanical interlock. However, writes to other parts of the Slot Control register would end up writing to the control fields. Hence, any write to Slot Control register is considered as a command. However, if the controller doesn't support any of attention indicator, power indicator, power controller and electromechanical interlock, command completed bit would not set in writing to Slot Control register. In this case, we should not wait for command completed bit set, otherwise all commands would be considered not completed in timeout seconds (1 sec.). The cause of the problem is pciehp driver didn't take this situation into account. This patch changes pciehp to take it into account. This patch also add the check for "No Command Completed Support" bit in Slot Capability register. If it is set, we should not wait for command completed bit set as well. This problem seems to be revealed by the commit c27fb883dffe11aa4cb35ecea1fa1832ba45d4da that fixed the bug that pciehp did not wait for command completed properly (pciehp just ignored the command completion event). Signed-off-by: Kenji Kaneshige Signed-off-by: Kristen Carlson Accardi Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp.h | 3 +++ drivers/pci/hotplug/pciehp_hpc.c | 40 +++++++++++++++++++++++++++++++++------- 2 files changed, 36 insertions(+), 7 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index 920091c4b18d..79c9ddaad3fb 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -97,6 +97,7 @@ struct controller { u8 cap_base; struct timer_list poll_timer; volatile int cmd_busy; + unsigned int no_cmd_complete:1; }; #define INT_BUTTON_IGNORE 0 @@ -135,6 +136,7 @@ struct controller { #define PWR_LED_PRSN 0x00000010 #define HP_SUPR_RM_SUP 0x00000020 #define EMI_PRSN 0x00020000 +#define NO_CMD_CMPL_SUP 0x00040000 #define ATTN_BUTTN(ctrl) ((ctrl)->slot_cap & ATTN_BUTTN_PRSN) #define POWER_CTRL(ctrl) ((ctrl)->slot_cap & PWR_CTRL_PRSN) @@ -143,6 +145,7 @@ struct controller { #define PWR_LED(ctrl) ((ctrl)->slot_cap & PWR_LED_PRSN) #define HP_SUPR_RM(ctrl) ((ctrl)->slot_cap & HP_SUPR_RM_SUP) #define EMI(ctrl) ((ctrl)->slot_cap & EMI_PRSN) +#define NO_CMD_CMPL(ctrl) ((ctrl)->slot_cap & NO_CMD_CMPL_SUP) extern int pciehp_sysfs_enable_slot(struct slot *slot); extern int pciehp_sysfs_disable_slot(struct slot *slot); diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 425a0f609977..70940fb3fffa 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -286,12 +286,28 @@ static int pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask) goto out; } - if ((slot_status & CMD_COMPLETED) == CMD_COMPLETED ) { - /* After 1 sec and CMD_COMPLETED still not set, just - proceed forward to issue the next command according - to spec. Just print out the error message */ - dbg("%s: CMD_COMPLETED not clear after 1 sec.\n", - __func__); + if (slot_status & CMD_COMPLETED) { + if (!ctrl->no_cmd_complete) { + /* + * After 1 sec and CMD_COMPLETED still not set, just + * proceed forward to issue the next command according + * to spec. Just print out the error message. + */ + dbg("%s: CMD_COMPLETED not clear after 1 sec.\n", + __func__); + } else if (!NO_CMD_CMPL(ctrl)) { + /* + * This controller semms to notify of command completed + * event even though it supports none of power + * controller, attention led, power led and EMI. + */ + dbg("%s: Unexpected CMD_COMPLETED. Need to wait for " + "command completed event.\n", __func__); + ctrl->no_cmd_complete = 0; + } else { + dbg("%s: Unexpected CMD_COMPLETED. Maybe the " + "controller is broken.\n", __func__); + } } retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl); @@ -315,7 +331,7 @@ static int pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask) /* * Wait for command completion. */ - if (!retval) + if (!retval && !ctrl->no_cmd_complete) retval = pcie_wait_cmd(ctrl); out: mutex_unlock(&ctrl->ctrl_lock); @@ -1130,6 +1146,7 @@ static inline void dbg_ctrl(struct controller *ctrl) dbg(" Power Indicator : %3s\n", PWR_LED(ctrl) ? "yes" : "no"); dbg(" Hot-Plug Surprise : %3s\n", HP_SUPR_RM(ctrl) ? "yes" : "no"); dbg(" EMI Present : %3s\n", EMI(ctrl) ? "yes" : "no"); + dbg(" Comamnd Completed : %3s\n", NO_CMD_CMPL(ctrl)? "no" : "yes"); pciehp_readw(ctrl, SLOTSTATUS, ®16); dbg("Slot Status : 0x%04x\n", reg16); pciehp_readw(ctrl, SLOTSTATUS, ®16); @@ -1161,6 +1178,15 @@ int pcie_init(struct controller *ctrl, struct pcie_device *dev) mutex_init(&ctrl->ctrl_lock); init_waitqueue_head(&ctrl->queue); dbg_ctrl(ctrl); + /* + * Controller doesn't notify of command completion if the "No + * Command Completed Support" bit is set in Slot Capability + * register or the controller supports none of power + * controller, attention led, power led and EMI. + */ + if (NO_CMD_CMPL(ctrl) || + !(POWER_CTRL(ctrl) | ATTN_LED(ctrl) | PWR_LED(ctrl) | EMI(ctrl))) + ctrl->no_cmd_complete = 1; info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n", pdev->vendor, pdev->device, -- cgit v1.2.3 From 6592e02ae4bd7b277230aa0c5821588a13b9d8e3 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Tue, 27 May 2008 19:05:26 +0900 Subject: pciehp: poll cmd completion if hotplug interrupt is disabled Fix improper long wait for command completion in pciehp probing. As described in PCI Express specification, software notification is not generated if the command that occurs as a result of a write to the Slot Control register that disables software notification of command completed events. Since pciehp driver doesn't take it into account, such command is issued in pciehp probing, and it causes improper long wait for command completion. This patch changes the pciehp driver to take such command into account. Signed-off-by: Kenji Kaneshige Signed-off-by: Kristen Carlson Accardi Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp_hpc.c | 42 ++++++++++++++++++++++++++++++++++++---- 1 file changed, 38 insertions(+), 4 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 70940fb3fffa..eb631af94738 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -247,14 +247,38 @@ static inline void pciehp_free_irq(struct controller *ctrl) free_irq(ctrl->pci_dev->irq, ctrl); } -static inline int pcie_wait_cmd(struct controller *ctrl) +static inline int pcie_poll_cmd(struct controller *ctrl) +{ + u16 slot_status; + int timeout = 1000; + + if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status)) + if (slot_status & CMD_COMPLETED) + goto completed; + for (timeout = 1000; timeout > 0; timeout -= 100) { + msleep(100); + if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status)) + if (slot_status & CMD_COMPLETED) + goto completed; + } + return 0; /* timeout */ + +completed: + pciehp_writew(ctrl, SLOTSTATUS, CMD_COMPLETED); + return timeout; +} + +static inline int pcie_wait_cmd(struct controller *ctrl, int poll) { int retval = 0; unsigned int msecs = pciehp_poll_mode ? 2500 : 1000; unsigned long timeout = msecs_to_jiffies(msecs); int rc; - rc = wait_event_interruptible_timeout(ctrl->queue, + if (poll) + rc = pcie_poll_cmd(ctrl); + else + rc = wait_event_interruptible_timeout(ctrl->queue, !ctrl->cmd_busy, timeout); if (!rc) dbg("Command not completed in 1000 msec\n"); @@ -331,8 +355,18 @@ static int pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask) /* * Wait for command completion. */ - if (!retval && !ctrl->no_cmd_complete) - retval = pcie_wait_cmd(ctrl); + if (!retval && !ctrl->no_cmd_complete) { + int poll = 0; + /* + * if hotplug interrupt is not enabled or command + * completed interrupt is not enabled, we need to poll + * command completed event. + */ + if (!(slot_ctrl & HP_INTR_ENABLE) || + !(slot_ctrl & CMD_CMPL_INTR_ENABLE)) + poll = 1; + retval = pcie_wait_cmd(ctrl, poll); + } out: mutex_unlock(&ctrl->ctrl_lock); return retval; -- cgit v1.2.3 From 0711c70ec0e9d2c002b1e9b5fb9f21e49d77f4fd Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Tue, 27 May 2008 19:06:22 +0900 Subject: pciehp: move msleep after power off According to the PCI Express specification, we must wait for at least 1 second after turning power off before taking any action that relies on power having been removed from the slot/adapter. For this, current pciehp wait for 1 second after issuing the power off command in hpc_power_off_slot() function. But waiting for 1 second in hpc_power_off_slot() can make pciehp probing slow-down because pciehp probe code calls hpc_power_off_slot() if the slot is not occupied just in case. We don't need to wait for 1 second at the pciehp probe time because there is no action on that empty slot. So move 1 second wait from hpc_power_off_slot() to the caller of hpc_power_off_slot(). Signed-off-by: Kenji Kaneshige Signed-off-by: Kristen Carlson Accardi Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp_ctrl.c | 14 ++++++++++++++ drivers/pci/hotplug/pciehp_hpc.c | 7 ------- 2 files changed, 14 insertions(+), 7 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index 7ad8a7dbc1a4..96a5d55a4983 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -174,6 +174,13 @@ static void set_slot_off(struct controller *ctrl, struct slot * pslot) } } + /* + * After turning power off, we must wait for at least 1 second + * before taking any action that relies on power having been + * removed from the slot/adapter. + */ + msleep(1000); + if (PWR_LED(ctrl)) pslot->hpc_ops->green_led_off(pslot); @@ -277,6 +284,13 @@ static int remove_board(struct slot *p_slot) } } + /* + * After turning power off, we must wait for at least 1 second + * before taking any action that relies on power having been + * removed from the slot/adapter. + */ + msleep(1000); + if (PWR_LED(ctrl)) /* turn off Green LED */ p_slot->hpc_ops->green_led_off(p_slot); diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index eb631af94738..79f104963166 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -754,13 +754,6 @@ static int hpc_power_off_slot(struct slot * slot) } dbg("%s: SLOTCTRL %x write cmd %x\n", __func__, ctrl->cap_base + SLOTCTRL, slot_cmd); - - /* - * After turning power off, we must wait for at least 1 second - * before taking any action that relies on power having been - * removed from the slot/adapter. - */ - msleep(1000); out: if (changed) pcie_unmask_bad_dllp(ctrl); -- cgit v1.2.3 From a86161b3134465f072d965ca7508ec9c1e2e52c7 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Tue, 27 May 2008 19:07:01 +0900 Subject: pci hotplug core: add check of duplicate slot name Fix the following errors reported by Jan C. Nordholz in http://bugzilla.kernel.org/show_bug.cgi?id=10751. kobject_add_internal failed for 2 with -EEXIST, don't try to register things with the same name in the same directory. Pid: 1, comm: swapper Tainted: G W 2.6.26-rc3 #1 [] kobject_add_internal+0x140/0x190 [] kobject_init_and_add+0x2d/0x40 [] pci_hp_register+0x81/0x2f0 [] pciehp_probe+0x1a7/0x470 [] sysfs_add_one+0x44/0xa0 [] sysfs_addrm_start+0x3f/0xb0 [] sysfs_create_link+0x8a/0xf0 [] pcie_port_probe_service+0x50/0x80 [] driver_sysfs_add+0x55/0x70 [] driver_probe_device+0x82/0x180 [] __driver_attach+0x6c/0x70 [] bus_for_each_dev+0x3a/0x60 [] pcied_init+0x0/0x80 [] driver_attach+0x16/0x20 [] __driver_attach+0x0/0x70 [] bus_add_driver+0x1a1/0x220 [] pcied_init+0x0/0x80 [] driver_register+0x4d/0x120 [] ibm_acpiphp_init+0x0/0x190 [] printk+0x1b/0x20 [] pcied_init+0x0/0x80 [] pcied_init+0xe/0x80 [] kernel_init+0x10a/0x300 [] schedule_tail+0x18/0x50 [] ret_from_fork+0x6/0x1c [] kernel_init+0x0/0x300 [] kernel_init+0x0/0x300 [] kernel_thread_helper+0x7/0x1c ======================= pci_hotplug: Unable to register kobject '2'<3>pciehp: pci_hp_register failed with error -22 Slot with the same name can be registered multiple times if shpchp or pciehp driver is loaded after acpiphp is loaded because ACPI based hotplug driver and Native OS hotplug driver trying to handle the same physical slot. In this case, current pci_hotplug core will call kobject_init_and_add() muliple time with the same name. This is the cause of this problem. To fix this problem, this patch adds the check into pci_hp_register() to see if the slot with the same name. Signed-off-by: Kenji Kaneshige Signed-off-by: Kristen Carlson Accardi Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pci_hotplug_core.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c index 925ba16355ce..a11021e8ce37 100644 --- a/drivers/pci/hotplug/pci_hotplug_core.c +++ b/drivers/pci/hotplug/pci_hotplug_core.c @@ -619,6 +619,7 @@ static struct hotplug_slot *get_slot_from_name (const char *name) int pci_hp_register (struct hotplug_slot *slot) { int result; + struct hotplug_slot *tmp; if (slot == NULL) return -ENODEV; @@ -630,7 +631,11 @@ int pci_hp_register (struct hotplug_slot *slot) return -EINVAL; } - /* this can fail if we have already registered a slot with the same name */ + /* Check if we have already registered a slot with the same name. */ + tmp = get_slot_from_name(slot->name); + if (tmp) + return -EEXIST; + slot->kobj.kset = pci_hotplug_slots_kset; result = kobject_init_and_add(&slot->kobj, &hotplug_slot_ktype, NULL, "%s", slot->name); -- cgit v1.2.3 From 9e4f2e8d4ddb04ad16a3828cd9a369a5a5287009 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Tue, 27 May 2008 19:07:33 +0900 Subject: pciehp: add message about pciehp_slot_with_bus option Some (broken?) platform assign the same slot name to multiple hotplug slots. On such system, slot initialization would fail because of name collision. The pciehp driver already have a "slot_with_bus" module option which adds the bus number into the slot name. This patch adds the message about this module option that will be displayed when slot name collision is detected. Signed-off-by: Kenji Kaneshige Signed-off-by: Kristen Carlson Accardi Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp_core.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index 43d8ddb2d679..48a2ed378914 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -254,7 +254,11 @@ static int init_slots(struct controller *ctrl) slot->hp_slot, slot->number, ctrl->slot_device_offset); retval = pci_hp_register(hotplug_slot); if (retval) { - err ("pci_hp_register failed with error %d\n", retval); + err("pci_hp_register failed with error %d\n", retval); + if (retval == -EEXIST) + err("Failed to register slot because of name " + "collision. Try \'pciehp_slot_with_bus\' " + "module option.\n"); goto error_info; } /* create additional sysfs entries */ -- cgit v1.2.3 From a9b841e1a336822a25899ec8cdf70a55a6696ae7 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 30 May 2008 13:39:12 +1000 Subject: PCI: fix rpadlpar pci hotplug driver sysfs usage When Greg "fixed" the sysfs usage of that driver a while back, he seem to have introduced a bug where the quotes are added around the name of our specific sysfs files, thus breaking the user space tool. This fixes it. Tested DLPAR operations on a POWER6 machine successfully. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/rpadlpar_sysfs.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/rpadlpar_sysfs.c b/drivers/pci/hotplug/rpadlpar_sysfs.c index e32148a8fa12..779c5db71be4 100644 --- a/drivers/pci/hotplug/rpadlpar_sysfs.c +++ b/drivers/pci/hotplug/rpadlpar_sysfs.c @@ -18,8 +18,12 @@ #include "rpadlpar.h" #define DLPAR_KOBJ_NAME "control" -#define ADD_SLOT_ATTR_NAME "add_slot" -#define REMOVE_SLOT_ATTR_NAME "remove_slot" + +/* Those two have no quotes because they are passed to __ATTR() which + * stringifies the argument (yuck !) + */ +#define ADD_SLOT_ATTR_NAME add_slot +#define REMOVE_SLOT_ATTR_NAME remove_slot #define MAX_DRC_NAME_LEN 64 -- cgit v1.2.3 From 45aec1ae72fc592f231e9e73ed9ed4d10cfbc0b5 Mon Sep 17 00:00:00 2001 From: "venkatesh.pallipadi@intel.com" Date: Tue, 18 Mar 2008 17:00:22 -0700 Subject: x86: PAT export resource_wc in pci sysfs For the ranges with IORESOURCE_PREFETCH, export a new resource_wc interface in pci /sysfs along with resource (which is uncached). Signed-off-by: Venkatesh Pallipadi Signed-off-by: Suresh Siddha Acked-by: Jesse Barnes Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- Documentation/filesystems/sysfs-pci.txt | 1 + drivers/pci/pci-sysfs.c | 84 ++++++++++++++++++++++++--------- include/linux/pci.h | 1 + 3 files changed, 64 insertions(+), 22 deletions(-) (limited to 'drivers/pci') diff --git a/Documentation/filesystems/sysfs-pci.txt b/Documentation/filesystems/sysfs-pci.txt index 5daa2aaec2c5..68ef48839c04 100644 --- a/Documentation/filesystems/sysfs-pci.txt +++ b/Documentation/filesystems/sysfs-pci.txt @@ -36,6 +36,7 @@ files, each with their own function. local_cpus nearby CPU mask (cpumask, ro) resource PCI resource host addresses (ascii, ro) resource0..N PCI resource N, if present (binary, mmap) + resource0_wc..N_wc PCI WC map resource N, if prefetchable (binary, mmap) rom PCI ROM resource, if present (binary, ro) subsystem_device PCI subsystem device (ascii, ro) subsystem_vendor PCI subsystem vendor (ascii, ro) diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 271d41cc05ab..9ec7d3977a82 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -489,13 +489,14 @@ pci_mmap_legacy_mem(struct kobject *kobj, struct bin_attribute *attr, * @kobj: kobject for mapping * @attr: struct bin_attribute for the file being mapped * @vma: struct vm_area_struct passed into the mmap + * @write_combine: 1 for write_combine mapping * * Use the regular PCI mapping routines to map a PCI resource into userspace. * FIXME: write combining? maybe automatic for prefetchable regions? */ static int pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr, - struct vm_area_struct *vma) + struct vm_area_struct *vma, int write_combine) { struct pci_dev *pdev = to_pci_dev(container_of(kobj, struct device, kobj)); @@ -518,7 +519,21 @@ pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr, vma->vm_pgoff += start >> PAGE_SHIFT; mmap_type = res->flags & IORESOURCE_MEM ? pci_mmap_mem : pci_mmap_io; - return pci_mmap_page_range(pdev, vma, mmap_type, 0); + return pci_mmap_page_range(pdev, vma, mmap_type, write_combine); +} + +static int +pci_mmap_resource_uc(struct kobject *kobj, struct bin_attribute *attr, + struct vm_area_struct *vma) +{ + return pci_mmap_resource(kobj, attr, vma, 0); +} + +static int +pci_mmap_resource_wc(struct kobject *kobj, struct bin_attribute *attr, + struct vm_area_struct *vma) +{ + return pci_mmap_resource(kobj, attr, vma, 1); } /** @@ -541,9 +556,46 @@ pci_remove_resource_files(struct pci_dev *pdev) sysfs_remove_bin_file(&pdev->dev.kobj, res_attr); kfree(res_attr); } + + res_attr = pdev->res_attr_wc[i]; + if (res_attr) { + sysfs_remove_bin_file(&pdev->dev.kobj, res_attr); + kfree(res_attr); + } } } +static int pci_create_attr(struct pci_dev *pdev, int num, int write_combine) +{ + /* allocate attribute structure, piggyback attribute name */ + int name_len = write_combine ? 13 : 10; + struct bin_attribute *res_attr; + int retval; + + res_attr = kzalloc(sizeof(*res_attr) + name_len, GFP_ATOMIC); + if (res_attr) { + char *res_attr_name = (char *)(res_attr + 1); + + if (write_combine) { + pdev->res_attr_wc[num] = res_attr; + sprintf(res_attr_name, "resource%d_wc", num); + res_attr->mmap = pci_mmap_resource_wc; + } else { + pdev->res_attr[num] = res_attr; + sprintf(res_attr_name, "resource%d", num); + res_attr->mmap = pci_mmap_resource_uc; + } + res_attr->attr.name = res_attr_name; + res_attr->attr.mode = S_IRUSR | S_IWUSR; + res_attr->size = pci_resource_len(pdev, num); + res_attr->private = &pdev->resource[num]; + retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr); + } else + retval = -ENOMEM; + + return retval; +} + /** * pci_create_resource_files - create resource files in sysfs for @dev * @dev: dev in question @@ -557,31 +609,19 @@ static int pci_create_resource_files(struct pci_dev *pdev) /* Expose the PCI resources from this device as files */ for (i = 0; i < PCI_ROM_RESOURCE; i++) { - struct bin_attribute *res_attr; /* skip empty resources */ if (!pci_resource_len(pdev, i)) continue; - /* allocate attribute structure, piggyback attribute name */ - res_attr = kzalloc(sizeof(*res_attr) + 10, GFP_ATOMIC); - if (res_attr) { - char *res_attr_name = (char *)(res_attr + 1); - - pdev->res_attr[i] = res_attr; - sprintf(res_attr_name, "resource%d", i); - res_attr->attr.name = res_attr_name; - res_attr->attr.mode = S_IRUSR | S_IWUSR; - res_attr->size = pci_resource_len(pdev, i); - res_attr->mmap = pci_mmap_resource; - res_attr->private = &pdev->resource[i]; - retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr); - if (retval) { - pci_remove_resource_files(pdev); - return retval; - } - } else { - return -ENOMEM; + retval = pci_create_attr(pdev, i, 0); + /* for prefetchable resources, create a WC mappable file */ + if (!retval && pdev->resource[i].flags & IORESOURCE_PREFETCH) + retval = pci_create_attr(pdev, i, 1); + + if (retval) { + pci_remove_resource_files(pdev); + return retval; } } return 0; diff --git a/include/linux/pci.h b/include/linux/pci.h index 509159bcd4e7..d18b1dd49fab 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -206,6 +206,7 @@ struct pci_dev { struct bin_attribute *rom_attr; /* attribute descriptor for sysfs ROM entry */ int rom_attr_enabled; /* has display of the rom attribute been enabled? */ struct bin_attribute *res_attr[DEVICE_COUNT_RESOURCE]; /* sysfs file for resources */ + struct bin_attribute *res_attr_wc[DEVICE_COUNT_RESOURCE]; /* sysfs file for WC mapping of resources */ #ifdef CONFIG_PCI_MSI struct list_head msi_list; #endif -- cgit v1.2.3 From 81d5575a48f49f494289a1299a32e4e5e41fbf40 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 12 Jun 2008 13:51:46 -0700 Subject: PCI: fixup write combine comment in pci_mmap_resource Now that we can actually do write combining properly, there's no need to have the FIXME. Signed-off-by: Jesse Barnes --- drivers/pci/pci-sysfs.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 9ec7d3977a82..6f3c7446c329 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -492,7 +492,6 @@ pci_mmap_legacy_mem(struct kobject *kobj, struct bin_attribute *attr, * @write_combine: 1 for write_combine mapping * * Use the regular PCI mapping routines to map a PCI resource into userspace. - * FIXME: write combining? maybe automatic for prefetchable regions? */ static int pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr, -- cgit v1.2.3