From d8dafd8ccde06f16095234dc3addf52b511805b3 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Tue, 21 Nov 2006 13:50:47 -0800
Subject: [SCSI] advansys: wrap PCI table inside ifdef CONFIG_PCI

The Advansys ISA/EISA/PCI driver has a compile error when
CONFIG_PCI=n, so wrap the pci_device_id table inside
ifdef CONFIG_PCI.

drivers/scsi/advansys.c: At top level:
drivers/scsi/advansys.c:18219: error: array type has incomplete element type
drivers/scsi/advansys.c:18221: error: 'PCI_ANY_ID' undeclared here (not in a function)
make[2]: *** [drivers/scsi/advansys.o] Error 1
make[1]: *** [drivers/scsi] Error 2
make: *** [drivers] Error 2

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/advansys.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 2b344356a29e..306bec355e45 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -18215,6 +18215,7 @@ AdvInquiryHandling(
 }
 MODULE_LICENSE("Dual BSD/GPL");
 
+#ifdef CONFIG_PCI
 /* PCI Devices supported by this driver */
 static struct pci_device_id advansys_pci_tbl[] __devinitdata = {
 	{ PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_ASP_1200A,
@@ -18232,4 +18233,4 @@ static struct pci_device_id advansys_pci_tbl[] __devinitdata = {
 	{ }
 };
 MODULE_DEVICE_TABLE(pci, advansys_pci_tbl);
-
+#endif /* CONFIG_PCI */
-- 
cgit v1.2.3


From 23be331d9e5077edf07d73813f870d3b895c8593 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@stusta.de>
Date: Fri, 24 Nov 2006 02:46:01 +0100
Subject: [SCSI] qla2xxx: make qla2x00_reg_remote_port() static

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/qla2xxx/qla_gbl.h  |  1 -
 drivers/scsi/qla2xxx/qla_init.c | 68 ++++++++++++++++++++---------------------
 2 files changed, 34 insertions(+), 35 deletions(-)

(limited to 'drivers')

diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 32ebeec45ff0..e4dd12f4b80e 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -45,7 +45,6 @@ extern void qla2x00_update_fcports(scsi_qla_host_t *);
 extern int qla2x00_abort_isp(scsi_qla_host_t *);
 
 extern void qla2x00_update_fcport(scsi_qla_host_t *, fc_port_t *);
-extern void qla2x00_reg_remote_port(scsi_qla_host_t *, fc_port_t *);
 
 extern void qla2x00_alloc_fw_dump(scsi_qla_host_t *);
 extern void qla2x00_try_to_stop_firmware(scsi_qla_host_t *);
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index a823f0bc519d..bd3284834cd7 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -2103,40 +2103,7 @@ qla2x00_iidma_fcport(scsi_qla_host_t *ha, fc_port_t *fcport)
 	}
 }
 
-/*
- * qla2x00_update_fcport
- *	Updates device on list.
- *
- * Input:
- *	ha = adapter block pointer.
- *	fcport = port structure pointer.
- *
- * Return:
- *	0  - Success
- *  BIT_0 - error
- *
- * Context:
- *	Kernel context.
- */
-void
-qla2x00_update_fcport(scsi_qla_host_t *ha, fc_port_t *fcport)
-{
-	fcport->ha = ha;
-	fcport->login_retry = 0;
-	fcport->port_login_retry_count = ha->port_down_retry_count *
-	    PORT_RETRY_TIME;
-	atomic_set(&fcport->port_down_timer, ha->port_down_retry_count *
-	    PORT_RETRY_TIME);
-	fcport->flags &= ~FCF_LOGIN_NEEDED;
-
-	qla2x00_iidma_fcport(ha, fcport);
-
-	atomic_set(&fcport->state, FCS_ONLINE);
-
-	qla2x00_reg_remote_port(ha, fcport);
-}
-
-void
+static void
 qla2x00_reg_remote_port(scsi_qla_host_t *ha, fc_port_t *fcport)
 {
 	struct fc_rport_identifiers rport_ids;
@@ -2178,6 +2145,39 @@ qla2x00_reg_remote_port(scsi_qla_host_t *ha, fc_port_t *fcport)
 		fcport->os_target_id = rport->scsi_target_id;
 }
 
+/*
+ * qla2x00_update_fcport
+ *	Updates device on list.
+ *
+ * Input:
+ *	ha = adapter block pointer.
+ *	fcport = port structure pointer.
+ *
+ * Return:
+ *	0  - Success
+ *  BIT_0 - error
+ *
+ * Context:
+ *	Kernel context.
+ */
+void
+qla2x00_update_fcport(scsi_qla_host_t *ha, fc_port_t *fcport)
+{
+	fcport->ha = ha;
+	fcport->login_retry = 0;
+	fcport->port_login_retry_count = ha->port_down_retry_count *
+	    PORT_RETRY_TIME;
+	atomic_set(&fcport->port_down_timer, ha->port_down_retry_count *
+	    PORT_RETRY_TIME);
+	fcport->flags &= ~FCF_LOGIN_NEEDED;
+
+	qla2x00_iidma_fcport(ha, fcport);
+
+	atomic_set(&fcport->state, FCS_ONLINE);
+
+	qla2x00_reg_remote_port(ha, fcport);
+}
+
 /*
  * qla2x00_configure_fabric
  *      Setup SNS devices with loop ID's.
-- 
cgit v1.2.3


From 8bcc24127be12967588db0ad0e614be937ee1d5a Mon Sep 17 00:00:00 2001
From: Matthew Wilcox <matthew@wil.cx>
Date: Thu, 7 Dec 2006 19:29:27 -0700
Subject: [SCSI] Add missing completion to scsi_complete_async_scans()

If either scsi_complete_async_scans() is called a second time
before the first call has finished, or a host scan is started while
scsi_complete_async_scans() is still sleeping, it would fail to wake up
the other task, which would sleep forever.

I've changed the kernel-doc to make it clear that
scsi_complete_async_scans() only guarantees that scans which started
before it was called are guaranteed to have finished when it returns.
I considered making it wait until all scans are completed, but it can't
guarantee that no more scans will start before it returns anyway, and it
runs the risk of confusing other callers of scsi_complete_async_scans()
for hosts actually scanning.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/scsi_scan.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

(limited to 'drivers')

diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 14e635aa44ce..13228312fc4d 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -133,12 +133,10 @@ struct async_scan_data {
 /**
  * scsi_complete_async_scans - Wait for asynchronous scans to complete
  *
- * Asynchronous scans add themselves to the scanning_hosts list.  Once
- * that list is empty, we know that the scans are complete.  Rather than
- * waking up periodically to check the state of the list, we pretend to be
- * a scanning task by adding ourselves at the end of the list and going to
- * sleep.  When the task before us wakes us up, we take ourselves off the
- * list and return.
+ * When this function returns, any host which started scanning before
+ * this function was called will have finished its scan.  Hosts which
+ * started scanning after this function was called may or may not have
+ * finished.
  */
 int scsi_complete_async_scans(void)
 {
@@ -171,6 +169,11 @@ int scsi_complete_async_scans(void)
 
 	spin_lock(&async_scan_lock);
 	list_del(&data->list);
+	if (!list_empty(&scanning_hosts)) {
+		struct async_scan_data *next = list_entry(scanning_hosts.next,
+				struct async_scan_data, list);
+		complete(&next->prev_finished);
+	}
  done:
 	spin_unlock(&async_scan_lock);
 
-- 
cgit v1.2.3


From 4ed381ee559ebfab32d3b21896c204992c36179a Mon Sep 17 00:00:00 2001
From: James Bottomley <James.Bottomley@steeleye.com>
Date: Mon, 11 Dec 2006 09:47:06 -0600
Subject: [SCSI] scsi_transport_spi: fix sense buffer size error

The code does this:

unsigned char sense[SCSI_SENSE_BUFFERSIZE];
...
scsi_normalize_sense(sense, sizeof(*sense), sshdr)

however the sizeof will return 1 not 96 which means the sense data will
have no valid ASC/ASCQ values.  Fix by putting the correct sense size.
The only affected case for this would have been the DV buffer sanity
check failure, which is fortunately quite rare.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/scsi_transport_spi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c
index 3fded4831460..014d7fea1ff3 100644
--- a/drivers/scsi/scsi_transport_spi.c
+++ b/drivers/scsi/scsi_transport_spi.c
@@ -122,7 +122,7 @@ static int spi_execute(struct scsi_device *sdev, const void *cmd,
 			if (!sshdr)
 				sshdr = &sshdr_tmp;
 
-			if (scsi_normalize_sense(sense, sizeof(*sense),
+			if (scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE,
 						 sshdr)
 			    && sshdr->sense_key == UNIT_ATTENTION)
 				continue;
-- 
cgit v1.2.3


From 9ef3c10e2009d8479b27e3ff39a7779fbca5711c Mon Sep 17 00:00:00 2001
From: James Bottomley <James.Bottomley@steeleye.com>
Date: Wed, 13 Dec 2006 09:19:49 -0600
Subject: [SCSI] seagate: remove BROKEN tag

Apparently the driver compiles and runs, so tidy up some macro warnings
and bring it back as unBROKEN.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/Kconfig   | 2 +-
 drivers/scsi/seagate.c | 5 +++--
 2 files changed, 4 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 60f582727185..7869c34a4a3e 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1303,7 +1303,7 @@ config SCSI_LPFC
 
 config SCSI_SEAGATE
 	tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support"
-	depends on X86 && ISA && SCSI && BROKEN
+	depends on X86 && ISA && SCSI
 	---help---
 	  These are 8-bit SCSI controllers; the ST-01 is also supported by
 	  this driver.  It is explained in section 3.9 of the SCSI-HOWTO,
diff --git a/drivers/scsi/seagate.c b/drivers/scsi/seagate.c
index 5ffec2721b28..ff62e9708e1c 100644
--- a/drivers/scsi/seagate.c
+++ b/drivers/scsi/seagate.c
@@ -114,6 +114,7 @@
 #define DPRINTK( when, msg... ) do { if ( (DEBUG & (when)) == (when) ) printk( msg ); } while (0)
 #else
 #define DPRINTK( when, msg... ) do { } while (0)
+#define DEBUG 0
 #endif
 #define DANY( msg... ) DPRINTK( 0xffff, msg );
 
@@ -523,7 +524,7 @@ int __init seagate_st0x_detect (struct scsi_host_template * tpnt)
 #ifdef ARBITRATE
 		" ARBITRATE"
 #endif
-#ifdef DEBUG
+#if DEBUG
 		" DEBUG"
 #endif
 #ifdef FAST
@@ -733,7 +734,7 @@ static int internal_command (unsigned char target, unsigned char lun,
 	unsigned char *data = NULL;
 	struct scatterlist *buffer = NULL;
 	int clock, temp, nobuffs = 0, done = 0, len = 0;
-#ifdef DEBUG
+#if DEBUG
 	int transfered = 0, phase = 0, newphase;
 #endif
 	register unsigned char status_read;
-- 
cgit v1.2.3


From 87b2380fcc6ff97c6ff5afd66ff50e94e6188d6b Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Wed, 13 Dec 2006 19:20:25 -0800
Subject: [SCSI] qla2xxx: Don't log trace-control async-events.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/qla2xxx/qla_mbx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 4cde76c85cb3..afe7310213cc 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -2486,7 +2486,7 @@ qla2x00_trace_control(scsi_qla_host_t *ha, uint16_t ctrl, dma_addr_t eft_dma,
 		mcp->mb[4] = LSW(MSD(eft_dma));
 		mcp->mb[5] = MSW(MSD(eft_dma));
 		mcp->mb[6] = buffers;
-		mcp->mb[7] = buffers;
+		mcp->mb[7] = 0;
 		mcp->out_mb |= MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2;
 	}
 	mcp->tov = 30;
-- 
cgit v1.2.3


From cdfc82ade68ca11aafc900c56ef2be2b4aea8f58 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Wed, 13 Dec 2006 19:20:26 -0800
Subject: [SCSI] qla2xxx: Correct endianess issue while interrogating MS
 status.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/qla2xxx/qla_gs.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index 97fbc62ec669..f8bd33e6a9e4 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -127,8 +127,8 @@ qla2x00_chk_ms_status(scsi_qla_host_t *ha, ms_iocb_entry_t *ms_pkt,
 		    ha->host_no, routine, ms_pkt->entry_status));
 	} else {
 		if (IS_QLA24XX(ha) || IS_QLA54XX(ha))
-			comp_status =
-			    ((struct ct_entry_24xx *)ms_pkt)->comp_status;
+			comp_status = le16_to_cpu(
+			    ((struct ct_entry_24xx *)ms_pkt)->comp_status);
 		else
 			comp_status = le16_to_cpu(ms_pkt->status);
 		switch (comp_status) {
-- 
cgit v1.2.3


From 71ea9949a307e92fd5f8b4107814014464f38f91 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Wed, 13 Dec 2006 19:20:27 -0800
Subject: [SCSI] qla2xxx: Use proper prep_ms_iocb() function during GFPN_ID.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/qla2xxx/qla_gs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index f8bd33e6a9e4..220ec41b27fc 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -1683,7 +1683,7 @@ qla2x00_gfpn_id(scsi_qla_host_t *ha, sw_info_t *list)
 		memset(list[i].fabric_port_name, 0, WWN_SIZE);
 
 		/* Prepare common MS IOCB */
-		ms_pkt = qla2x00_prep_ms_iocb(ha, GFPN_ID_REQ_SIZE,
+		ms_pkt = ha->isp_ops.prep_ms_iocb(ha, GFPN_ID_REQ_SIZE,
 		    GFPN_ID_RSP_SIZE);
 
 		/* Prepare CT request */
-- 
cgit v1.2.3


From 4346b14942dbb65e5d4fa7ec0e6567c39861ae6c Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Wed, 13 Dec 2006 19:20:28 -0800
Subject: [SCSI] qla2xxx: Detect GPSC capabilities within a fabric.

Disable subsequent GPSC queries if Fabric Management services do
not support the operation.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/qla2xxx/qla_def.h |  2 ++
 drivers/scsi/qla2xxx/qla_gs.c  | 18 ++++++++++++++++--
 drivers/scsi/qla2xxx/qla_isr.c |  2 ++
 3 files changed, 20 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index c4fc40f8e8ca..2c10130d9e03 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -1602,6 +1602,7 @@ typedef struct fc_port {
 
 #define CT_REJECT_RESPONSE	0x8001
 #define CT_ACCEPT_RESPONSE	0x8002
+#define CT_REASON_INVALID_COMMAND_CODE	0x01
 #define CT_REASON_CANNOT_PERFORM	0x09
 #define CT_EXPL_ALREADY_REGISTERED	0x10
 
@@ -2079,6 +2080,7 @@ typedef struct scsi_qla_host {
 		uint32_t	msi_enabled		:1;
 		uint32_t	msix_enabled		:1;
 		uint32_t	disable_serdes		:1;
+		uint32_t	gpsc_supported		:1;
 	} flags;
 
 	atomic_t	loop_state;
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index 220ec41b27fc..ec5b2dd90d6a 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -143,6 +143,7 @@ qla2x00_chk_ms_status(scsi_qla_host_t *ha, ms_iocb_entry_t *ms_pkt,
 				DEBUG2_3(qla2x00_dump_buffer(
 				    (uint8_t *)&ct_rsp->header,
 				    sizeof(struct ct_rsp_hdr)));
+				rval = QLA_INVALID_COMMAND;
 			} else
 				rval = QLA_SUCCESS;
 			break;
@@ -1784,6 +1785,8 @@ qla2x00_gpsc(scsi_qla_host_t *ha, sw_info_t *list)
 
 	if (!IS_QLA24XX(ha) && !IS_QLA54XX(ha))
 		return QLA_FUNCTION_FAILED;
+	if (!ha->flags.gpsc_supported)
+		return QLA_FUNCTION_FAILED;
 
 	rval = qla2x00_mgmt_svr_login(ha);
 	if (rval)
@@ -1813,8 +1816,19 @@ qla2x00_gpsc(scsi_qla_host_t *ha, sw_info_t *list)
 			/*EMPTY*/
 			DEBUG2_3(printk("scsi(%ld): GPSC issue IOCB "
 			    "failed (%d).\n", ha->host_no, rval));
-		} else if (qla2x00_chk_ms_status(ha, ms_pkt, ct_rsp,
-		    "GPSC") != QLA_SUCCESS) {
+		} else if ((rval = qla2x00_chk_ms_status(ha, ms_pkt, ct_rsp,
+		    "GPSC")) != QLA_SUCCESS) {
+			/* FM command unsupported? */
+			if (rval == QLA_INVALID_COMMAND &&
+			    ct_rsp->header.reason_code ==
+			    CT_REASON_INVALID_COMMAND_CODE) {
+				DEBUG2(printk("scsi(%ld): GPSC command "
+				    "unsupported, disabling query...\n",
+				    ha->host_no));
+				ha->flags.gpsc_supported = 0;
+				rval = QLA_FUNCTION_FAILED;
+				break;
+			}
 			rval = QLA_FUNCTION_FAILED;
 		} else {
 			/* Save portname */
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index d3b6df4d55c8..79115c1f2494 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -475,6 +475,8 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb)
 			set_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
 		}
 		set_bit(REGISTER_FC4_NEEDED, &ha->dpc_flags);
+
+		ha->flags.gpsc_supported = 1;
 		break;
 
 	case MBA_CHG_IN_CONNECTION:	/* Change in connection mode */
-- 
cgit v1.2.3


From 8bc69e7dc307d6195d92fa87da1fcbae6e5dda69 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Wed, 13 Dec 2006 19:20:29 -0800
Subject: [SCSI] qla2xxx: Correct IOCB queueing mechanism for ISP54XX HBAs.

Original code would incorrectly use non-24xx code-paths.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/qla2xxx/qla_os.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index d03523d3bf38..36657fa3aa43 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1413,7 +1413,9 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	sht = &qla2x00_driver_template;
 	if (pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2422 ||
-	    pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432)
+	    pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432 ||
+	    pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5422 ||
+	    pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5432)
 		sht = &qla24xx_driver_template;
 	host = scsi_host_alloc(sht, sizeof(scsi_qla_host_t));
 	if (host == NULL) {
-- 
cgit v1.2.3


From 0c8c39af1699227e5a5d13e54a71f93347fe4f61 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Wed, 13 Dec 2006 19:20:30 -0800
Subject: [SCSI] qla2xxx: Correct reset handling logic.

- honor ISP24XX NVRAM settings for lip-reset, full-login-lip, and
  device-reset.
- correct LIP_FULL_LOGIN mailbox command issuance.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/qla2xxx/qla_init.c |  8 +++---
 drivers/scsi/qla2xxx/qla_mbx.c  | 10 ++++----
 drivers/scsi/qla2xxx/qla_os.c   | 55 +++++++++++++++++++++--------------------
 3 files changed, 38 insertions(+), 35 deletions(-)

(limited to 'drivers')

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index bd3284834cd7..b3dac26ddba3 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -3476,9 +3476,11 @@ qla24xx_nvram_config(scsi_qla_host_t *ha)
 
 	/* Set host adapter parameters. */
 	ha->flags.disable_risc_code_load = 0;
-	ha->flags.enable_lip_reset = 1;
-	ha->flags.enable_lip_full_login = 1;
-	ha->flags.enable_target_reset = 1;
+	ha->flags.enable_lip_reset = 0;
+	ha->flags.enable_lip_full_login =
+	    le32_to_cpu(nv->host_p) & BIT_10 ? 1: 0;
+	ha->flags.enable_target_reset =
+	    le32_to_cpu(nv->host_p) & BIT_11 ? 1: 0;
 	ha->flags.enable_led_scheme = 0;
 	ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1: 0;
 
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index afe7310213cc..077e5789beeb 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -1339,9 +1339,9 @@ qla2x00_lip_reset(scsi_qla_host_t *ha)
 
 	if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
 		mcp->mb[0] = MBC_LIP_FULL_LOGIN;
-		mcp->mb[1] = BIT_0;
-		mcp->mb[2] = 0xff;
-		mcp->mb[3] = 0;
+		mcp->mb[1] = BIT_6;
+		mcp->mb[2] = 0;
+		mcp->mb[3] = ha->loop_reset_delay;
 		mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0;
 	} else {
 		mcp->mb[0] = MBC_LIP_RESET;
@@ -1823,8 +1823,8 @@ qla2x00_full_login_lip(scsi_qla_host_t *ha)
 	    ha->host_no));
 
 	mcp->mb[0] = MBC_LIP_FULL_LOGIN;
-	mcp->mb[1] = 0;
-	mcp->mb[2] = 0xff;
+	mcp->mb[1] = IS_QLA24XX(ha) || IS_QLA54XX(ha) ? BIT_3: 0;
+	mcp->mb[2] = 0;
 	mcp->mb[3] = 0;
 	mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0;
 	mcp->in_mb = MBX_0;
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 36657fa3aa43..d6445ae841ba 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1037,48 +1037,49 @@ eh_host_reset_lock:
 static int
 qla2x00_loop_reset(scsi_qla_host_t *ha)
 {
-	int status = QLA_SUCCESS;
+	int ret;
 	struct fc_port *fcport;
 
+	if (ha->flags.enable_lip_full_login) {
+		ret = qla2x00_full_login_lip(ha);
+		if (ret != QLA_SUCCESS) {
+			DEBUG2_3(printk("%s(%ld): bus_reset failed: "
+			    "full_login_lip=%d.\n", __func__, ha->host_no,
+			    ret));
+		}
+		atomic_set(&ha->loop_state, LOOP_DOWN);
+		atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
+		qla2x00_mark_all_devices_lost(ha, 0);
+		qla2x00_wait_for_loop_ready(ha);
+	}
+
 	if (ha->flags.enable_lip_reset) {
-		status = qla2x00_lip_reset(ha);
+		ret = qla2x00_lip_reset(ha);
+		if (ret != QLA_SUCCESS) {
+			DEBUG2_3(printk("%s(%ld): bus_reset failed: "
+			    "lip_reset=%d.\n", __func__, ha->host_no, ret));
+		}
+		qla2x00_wait_for_loop_ready(ha);
 	}
 
-	if (status == QLA_SUCCESS && ha->flags.enable_target_reset) {
+	if (ha->flags.enable_target_reset) {
 		list_for_each_entry(fcport, &ha->fcports, list) {
 			if (fcport->port_type != FCT_TARGET)
 				continue;
 
-			status = qla2x00_device_reset(ha, fcport);
-			if (status != QLA_SUCCESS)
-				break;
+			ret = qla2x00_device_reset(ha, fcport);
+			if (ret != QLA_SUCCESS) {
+				DEBUG2_3(printk("%s(%ld): bus_reset failed: "
+				    "target_reset=%d d_id=%x.\n", __func__,
+				    ha->host_no, ret, fcport->d_id.b24));
+			}
 		}
 	}
 
-	if (status == QLA_SUCCESS &&
-		((!ha->flags.enable_target_reset &&
-		  !ha->flags.enable_lip_reset) ||
-		ha->flags.enable_lip_full_login)) {
-
-		status = qla2x00_full_login_lip(ha);
-	}
-
 	/* Issue marker command only when we are going to start the I/O */
 	ha->marker_needed = 1;
 
-	if (status) {
-		/* Empty */
-		DEBUG2_3(printk("%s(%ld): **** FAILED ****\n",
-				__func__,
-				ha->host_no));
-	} else {
-		/* Empty */
-		DEBUG3(printk("%s(%ld): exiting normally.\n",
-				__func__,
-				ha->host_no));
-	}
-
-	return(status);
+	return QLA_SUCCESS;
 }
 
 /*
-- 
cgit v1.2.3


From 07f31805e1fa98f802f60433cdd1c0461120ef0e Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Wed, 13 Dec 2006 19:20:31 -0800
Subject: [SCSI] qla2xxx: Perform a fw-dump when an ISP23xx RISC-paused state
 is detected.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/qla2xxx/qla_isr.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 79115c1f2494..6a741e313107 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -134,11 +134,11 @@ qla2300_intr_handler(int irq, void *dev_id)
 		if (stat & HSR_RISC_PAUSED) {
 			hccr = RD_REG_WORD(&reg->hccr);
 			if (hccr & (BIT_15 | BIT_13 | BIT_11 | BIT_8))
-				qla_printk(KERN_INFO, ha,
-				    "Parity error -- HCCR=%x.\n", hccr);
+				qla_printk(KERN_INFO, ha, "Parity error -- "
+				    "HCCR=%x, Dumping firmware!\n", hccr);
 			else
-				qla_printk(KERN_INFO, ha,
-				    "RISC paused -- HCCR=%x.\n", hccr);
+				qla_printk(KERN_INFO, ha, "RISC paused -- "
+				    "HCCR=%x, Dumping firmware!\n", hccr);
 
 			/*
 			 * Issue a "HARD" reset in order for the RISC
@@ -147,6 +147,8 @@ qla2300_intr_handler(int irq, void *dev_id)
 			 */
 			WRT_REG_WORD(&reg->hccr, HCCR_RESET_RISC);
 			RD_REG_WORD(&reg->hccr);
+
+			ha->isp_ops.fw_dump(ha, 1);
 			set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
 			break;
 		} else if ((stat & HSR_RISC_INT) == 0)
-- 
cgit v1.2.3


From 96ca5cad09edd86da9c8fd613c9406cdf978cd6d Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Wed, 13 Dec 2006 19:20:32 -0800
Subject: [SCSI] qla2xxx: Use generic isp_ops.fw_dump() function.

Rather than a direct call, as was done in the case of a
RISC-paused state within the ISP24xx interrupt handler.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/qla2xxx/qla_isr.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 6a741e313107..39fd17b05be5 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1444,8 +1444,7 @@ qla24xx_intr_handler(int irq, void *dev_id)
 
 			qla_printk(KERN_INFO, ha, "RISC paused -- HCCR=%x, "
 			    "Dumping firmware!\n", hccr);
-			qla24xx_fw_dump(ha, 1);
-
+			ha->isp_ops.fw_dump(ha, 1);
 			set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
 			break;
 		} else if ((stat & HSRX_RISC_INT) == 0)
-- 
cgit v1.2.3


From 03c1c39680f949e0a944d540949b2d3d6887cdc0 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Wed, 13 Dec 2006 19:20:33 -0800
Subject: [SCSI] qla2xxx: Update version number to 8.01.07-k4.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/qla2xxx/qla_version.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 1fa0bce6b24e..459e0d6bd2b4 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.01.07-k3"
+#define QLA2XXX_VERSION      "8.01.07-k4"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	1
-- 
cgit v1.2.3


From ddaf6fc85459d161c39a70a2cf9e04343dafe47f Mon Sep 17 00:00:00 2001
From: James Bottomley <James.Bottomley@steeleye.com>
Date: Wed, 13 Dec 2006 10:10:40 -0600
Subject: [SCSI] scsi_scan: fix report lun problems with CDROM or RBC devices

Apparently no ATAPI CD/DVD actually supports REPORT LUNS (in spite of
claiming scsi-3 compliance, where it's mandatory) and worse, some
crash or flake out on being sent the command.  This may actually be
due to a conflict between SPC and MMC with MMC not listing REPORT LUNS
as mandatory.  The same standards conflict exists for RBC as well.

Fix all of this by reversing the blacklists for CDROM and RBC devices
(i.e. now they have to have the BLIST_REPORTLUNS2 flag set even if the
inquiry data returns scsi-3 compliance).

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/scsi_scan.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 13228312fc4d..b83d03c4deef 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -742,6 +742,14 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
 		sdev->no_uld_attach = 1;
 
 	switch (sdev->type = (inq_result[0] & 0x1f)) {
+	case TYPE_RBC:
+		/* RBC devices can return SCSI-3 compliance and yet
+		 * still not support REPORT LUNS, so make them act as
+		 * BLIST_NOREPORTLUN unless BLIST_REPORTLUN2 is
+		 * specifically set */
+		if ((*bflags & BLIST_REPORTLUN2) == 0)
+			*bflags |= BLIST_NOREPORTLUN;
+		/* fall through */
 	case TYPE_TAPE:
 	case TYPE_DISK:
 	case TYPE_PRINTER:
@@ -752,11 +760,17 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
 	case TYPE_ENCLOSURE:
 	case TYPE_COMM:
 	case TYPE_RAID:
-	case TYPE_RBC:
 		sdev->writeable = 1;
 		break;
-	case TYPE_WORM:
 	case TYPE_ROM:
+		/* MMC devices can return SCSI-3 compliance and yet
+		 * still not support REPORT LUNS, so make them act as
+		 * BLIST_NOREPORTLUN unless BLIST_REPORTLUN2 is
+		 * specifically set */
+		if ((*bflags & BLIST_REPORTLUN2) == 0)
+			*bflags |= BLIST_NOREPORTLUN;
+		/* fall through */
+	case TYPE_WORM:
 		sdev->writeable = 0;
 		break;
 	default:
-- 
cgit v1.2.3


From c959e1c2a475e0ad0d24eff200de9b6dcb3710c6 Mon Sep 17 00:00:00 2001
From: Arne Redlich <agr@powerkom-dd.de>
Date: Sun, 17 Dec 2006 12:10:24 -0600
Subject: [SCSI] iscsi: fix 2.6.19 data digest calculation bug

The transition from crypto_digest_*() to  the crypto_hash_*() family
introduced a bug into the data digest calculation: crypto_hash_update() is
called with the number of S/G elements instead of the S/G lists data size.

Signed-off-by: Arne Redlich <arne.redlich@xiranet.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/iscsi_tcp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index d0b139cccbbc..61e3a6124c4b 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -749,7 +749,7 @@ static int iscsi_scsi_data_in(struct iscsi_conn *conn)
 				if (!offset)
 					crypto_hash_update(
 							&tcp_conn->rx_hash,
-							&sg[i], 1);
+							&sg[i], sg[i].length);
 				else
 					partial_sg_digest_update(
 							&tcp_conn->rx_hash,
-- 
cgit v1.2.3


From 59c17ec1690fd76ce6ae586daac29b04601be3e0 Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Sun, 17 Dec 2006 12:10:25 -0600
Subject: [SCSI] iscsi: fix crypto_alloc_hash() error check

The return value of crypto_alloc_hash() should be checked by
IS_ERR().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/iscsi_tcp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index 61e3a6124c4b..888968631471 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -1777,13 +1777,13 @@ iscsi_tcp_conn_create(struct iscsi_cls_session *cls_session, uint32_t conn_idx)
 	tcp_conn->tx_hash.tfm = crypto_alloc_hash("crc32c", 0,
 						  CRYPTO_ALG_ASYNC);
 	tcp_conn->tx_hash.flags = 0;
-	if (!tcp_conn->tx_hash.tfm)
+	if (IS_ERR(tcp_conn->tx_hash.tfm))
 		goto free_tcp_conn;
 
 	tcp_conn->rx_hash.tfm = crypto_alloc_hash("crc32c", 0,
 						  CRYPTO_ALG_ASYNC);
 	tcp_conn->rx_hash.flags = 0;
-	if (!tcp_conn->rx_hash.tfm)
+	if (IS_ERR(tcp_conn->rx_hash.tfm))
 		goto free_tx_tfm;
 
 	return cls_conn;
-- 
cgit v1.2.3


From 09492605aa3e17ce19572b9e925ecf66e4da55dd Mon Sep 17 00:00:00 2001
From: Meelis Roos <mroos@linux.ee>
Date: Sun, 17 Dec 2006 12:10:26 -0600
Subject: [SCSI] iscsi: newline in printk

This patch cures two run together printk messages in iSCSI
driver.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/scsi_transport_iscsi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 9c22f1342715..ce0d14af33c8 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -1416,7 +1416,7 @@ static __init int iscsi_transport_init(void)
 {
 	int err;
 
-	printk(KERN_INFO "Loading iSCSI transport class v%s.",
+	printk(KERN_INFO "Loading iSCSI transport class v%s.\n",
 		ISCSI_TRANSPORT_VERSION);
 
 	err = class_register(&iscsi_transport_class);
-- 
cgit v1.2.3


From 94cb3f822bb806a750e1e1c8457bee6e96671569 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Sun, 17 Dec 2006 12:10:27 -0600
Subject: [SCSI] iscsi: simplify IPv6 and IPv4 address printing

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/iscsi_tcp.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index 888968631471..437684084377 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -2044,13 +2044,11 @@ iscsi_tcp_conn_get_param(struct iscsi_cls_conn *cls_conn,
 		sk = tcp_conn->sock->sk;
 		if (sk->sk_family == PF_INET) {
 			inet = inet_sk(sk);
-			len = sprintf(buf, "%u.%u.%u.%u\n",
+			len = sprintf(buf, NIPQUAD_FMT "\n",
 				      NIPQUAD(inet->daddr));
 		} else {
 			np = inet6_sk(sk);
-			len = sprintf(buf,
-				"%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x\n",
-				NIP6(np->daddr));
+			len = sprintf(buf, NIP6_FMT "\n", NIP6(np->daddr));
 		}
 		mutex_unlock(&conn->xmitmutex);
 		break;
-- 
cgit v1.2.3


From 9b80cb4be1f4181875e0cf274dc59f42964fdf1b Mon Sep 17 00:00:00 2001
From: Mike Christie <michaelc@cs.wisc.edu>
Date: Sun, 17 Dec 2006 12:10:28 -0600
Subject: [SCSI] libiscsi: fix senselen calculation

Yanling Qi, noted that when the sense data length of
a check-condition is greater than 0x7f (127), senselen = (data[0] << 8)
| data[1] will become negative. It causes different kinds of panics from
GPF, spin_lock deadlock to spin_lock recursion.

We were also swapping this value on big endien machines.

This patch fixes both issues by using be16_to_cpu().

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/libiscsi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index e11b23c641e2..d37048c96eab 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -260,7 +260,7 @@ static int iscsi_scsi_cmd_rsp(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
 	}
 
 	if (rhdr->cmd_status == SAM_STAT_CHECK_CONDITION) {
-		int senselen;
+		uint16_t senselen;
 
 		if (datalen < 2) {
 invalid_datalen:
@@ -270,12 +270,12 @@ invalid_datalen:
 			goto out;
 		}
 
-		senselen = (data[0] << 8) | data[1];
+		senselen = be16_to_cpu(*(uint16_t *)data);
 		if (datalen < senselen)
 			goto invalid_datalen;
 
 		memcpy(sc->sense_buffer, data + 2,
-		       min(senselen, SCSI_SENSE_BUFFERSIZE));
+		       min_t(uint16_t, senselen, SCSI_SENSE_BUFFERSIZE));
 		debug_scsi("copied %d bytes of sense\n",
 			   min(senselen, SCSI_SENSE_BUFFERSIZE));
 	}
-- 
cgit v1.2.3


From 8e9d58e723e29e8b04c09bd9badd81c1d8232f5f Mon Sep 17 00:00:00 2001
From: "Salyzyn, Mark" <mark_salyzyn@adaptec.com>
Date: Mon, 18 Dec 2006 15:01:41 -0500
Subject: [SCSI] aacraid: Product List Update

Update drivers/scsi/aacraid/linit.c and Documentation/scsi/aacraid.txt
file with the current list of
adapters supported by the aacraid driver. Deprecated a few adapters that
never shipped, corrected a
few and added new adapters that matched the family code support. No
functional changes to the driver.
No side effects.

Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 Documentation/scsi/aacraid.txt | 66 ++++++++++++++++++++++++------------------
 drivers/scsi/aacraid/linit.c   | 20 ++++++-------
 2 files changed, 48 insertions(+), 38 deletions(-)

(limited to 'drivers')

diff --git a/Documentation/scsi/aacraid.txt b/Documentation/scsi/aacraid.txt
index 3367130e64f6..dc8e44fc650f 100644
--- a/Documentation/scsi/aacraid.txt
+++ b/Documentation/scsi/aacraid.txt
@@ -11,43 +11,42 @@ the original).
 Supported Cards/Chipsets
 -------------------------
 	PCI ID (pci.ids)	OEM	Product
-	9005:0283:9005:0283	Adaptec	Catapult (3210S with arc firmware)
-	9005:0284:9005:0284	Adaptec	Tomcat (3410S with arc firmware)
 	9005:0285:9005:0285	Adaptec	2200S (Vulcan)
 	9005:0285:9005:0286	Adaptec	2120S (Crusader)
 	9005:0285:9005:0287	Adaptec	2200S (Vulcan-2m)
 	9005:0285:9005:0288	Adaptec	3230S (Harrier)
 	9005:0285:9005:0289	Adaptec	3240S (Tornado)
 	9005:0285:9005:028a	Adaptec	2020ZCR (Skyhawk)
-	9005:0285:9005:028b	Adaptec 2025ZCR (Terminator)
+	9005:0285:9005:028b	Adaptec	2025ZCR (Terminator)
 	9005:0286:9005:028c	Adaptec	2230S (Lancer)
 	9005:0286:9005:028c	Adaptec	2230SLP (Lancer)
 	9005:0286:9005:028d	Adaptec	2130S (Lancer)
 	9005:0285:9005:028e	Adaptec	2020SA (Skyhawk)
-	9005:0285:9005:028f	Adaptec 2025SA (Terminator)
+	9005:0285:9005:028f	Adaptec	2025SA (Terminator)
 	9005:0285:9005:0290	Adaptec	2410SA (Jaguar)
-	9005:0285:103c:3227	Adaptec 2610SA (Bearcat HP release)
-	9005:0285:9005:0293	Adaptec 21610SA (Corsair-16)
+	9005:0285:103c:3227	Adaptec	2610SA (Bearcat HP release)
+	9005:0285:9005:0293	Adaptec	21610SA (Corsair-16)
 	9005:0285:9005:0296	Adaptec	2240S (SabreExpress)
 	9005:0285:9005:0292	Adaptec	2810SA (Corsair-8)
-	9005:0285:9005:0294	Adaptec	Prowler
-	9005:0285:9005:0297	Adaptec	4005SAS (AvonPark)
-	9005:0285:9005:0298	Adaptec	4000SAS (BlackBird)
+	9005:0285:9005:0297	Adaptec	4005 (AvonPark)
+	9005:0285:9005:0298	Adaptec	4000 (BlackBird)
 	9005:0285:9005:0299	Adaptec	4800SAS (Marauder-X)
 	9005:0285:9005:029a	Adaptec	4805SAS (Marauder-E)
 	9005:0286:9005:029b	Adaptec	2820SA (Intruder)
 	9005:0286:9005:029c	Adaptec	2620SA (Intruder)
 	9005:0286:9005:029d	Adaptec	2420SA (Intruder HP release)
-	9005:0286:9005:02a2	Adaptec	3800SAS (Hurricane44)
-	9005:0286:9005:02a7	Adaptec	3805SAS (Hurricane80)
-	9005:0286:9005:02a8	Adaptec	3400SAS (Hurricane40)
-	9005:0286:9005:02ac	Adaptec	1800SAS (Typhoon44)
-	9005:0286:9005:02b3	Adaptec	2400SAS (Hurricane40lm)
-	9005:0285:9005:02b5	Adaptec ASR5800 (Voodoo44)
-	9005:0285:9005:02b6	Adaptec ASR5805 (Voodoo80)
-	9005:0285:9005:02b7	Adaptec ASR5808 (Voodoo08)
+	9005:0286:9005:02ac	Adaptec	1800 (Typhoon44)
+	9005:0285:9005:02b5	Adaptec	5445 (Voodoo44)
+	9005:0285:9005:02b6	Adaptec	5805 (Voodoo80)
+	9005:0285:9005:02b7	Adaptec	5085 (Voodoo08)
+	9005:0285:9005:02bb	Adaptec	3405 (Marauder40LP)
+	9005:0285:9005:02bc	Adaptec	3805 (Marauder80LP)
+	9005:0285:9005:02c7	Adaptec	3085 (Marauder08ELP)
+	9005:0285:9005:02bd	Adaptec	31205 (Marauder120)
+	9005:0285:9005:02be	Adaptec	31605 (Marauder160)
+	9005:0285:9005:02c3	Adaptec	51205 (Voodoo120)
+	9005:0285:9005:02c4	Adaptec	51605 (Voodoo160)
 	1011:0046:9005:0364	Adaptec	5400S (Mustang)
-	1011:0046:9005:0365	Adaptec	5400S (Mustang)
 	9005:0287:9005:0800	Adaptec	Themisto (Jupiter)
 	9005:0200:9005:0200	Adaptec	Themisto (Jupiter)
 	9005:0286:9005:0800	Adaptec	Callisto (Jupiter)
@@ -68,21 +67,32 @@ Supported Cards/Chipsets
 	9005:0285:17aa:0287	Legend	S230 (Vulcan)
 	9005:0285:9005:0290	IBM	ServeRAID 7t (Jaguar)
 	9005:0285:1014:02F2	IBM	ServeRAID 8i (AvonPark)
-	9005:0285:1014:0312	IBM	ServeRAID 8i (AvonParkLite)
 	9005:0286:1014:9540	IBM	ServeRAID 8k/8k-l4 (AuroraLite)
 	9005:0286:1014:9580	IBM	ServeRAID 8k/8k-l8 (Aurora)
-	9005:0286:1014:034d	IBM	ServeRAID 8s (Hurricane)
-	9005:0286:9005:029e	ICP	ICP9024R0 (Lancer)
-	9005:0286:9005:029f	ICP	ICP9014R0 (Lancer)
+	9005:0285:1014:034d	IBM	ServeRAID 8s (Marauder-E)
+	9005:0286:9005:029e	ICP	ICP9024RO (Lancer)
+	9005:0286:9005:029f	ICP	ICP9014RO (Lancer)
 	9005:0286:9005:02a0	ICP	ICP9047MA (Lancer)
 	9005:0286:9005:02a1	ICP	ICP9087MA (Lancer)
-	9005:0286:9005:02a3	ICP	ICP5445AU (Hurricane44)
-	9005:0286:9005:02a4	ICP	ICP9085LI (Marauder-X)
-	9005:0286:9005:02a5	ICP	ICP5085BR (Marauder-E)
+	9005:0285:9005:02a4	ICP	ICP9085LI (Marauder-X)
+	9005:0285:9005:02a5	ICP	ICP5085BR (Marauder-E)
 	9005:0286:9005:02a6	ICP	ICP9067MA (Intruder-6)
-	9005:0286:9005:02a9	ICP	ICP5085AU (Hurricane80)
-	9005:0286:9005:02aa	ICP	ICP5045AU (Hurricane40)
-	9005:0286:9005:02b4	ICP	ICP5045AL (Hurricane40lm)
+	9005:0285:9005:02b2	ICP	(Voodoo 8 internal 8 external)
+	9005:0285:9005:02b8	ICP	ICP5445SL (Voodoo44)
+	9005:0285:9005:02b9	ICP	ICP5085SL (Voodoo80)
+	9005:0285:9005:02ba	ICP	ICP5805SL (Voodoo08)
+	9005:0285:9005:02bf	ICP	ICP5045BL (Marauder40LP)
+	9005:0285:9005:02c0	ICP	ICP5085BL (Marauder80LP)
+	9005:0285:9005:02c8	ICP	ICP5805BL (Marauder08ELP)
+	9005:0285:9005:02c1	ICP	ICP5125BR (Marauder120)
+	9005:0285:9005:02c2	ICP	ICP5165BR (Marauder160)
+	9005:0285:9005:02c5	ICP	ICP5125SL (Voodoo120)
+	9005:0285:9005:02c6	ICP	ICP5165SL (Voodoo160)
+	9005:0286:9005:02ab		(Typhoon40)
+	9005:0286:9005:02ad		(Aurora ARK)
+	9005:0286:9005:02ae		(Aurora Lite ARK)
+	9005:0285:9005:02b0		(Sunrise Lake ARK)
+	9005:0285:9005:02b1	Adaptec	(Voodoo 8 internal 8 external)
 
 People
 -------------------------
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 359e7ddfdb47..d2cf875af59b 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -117,8 +117,8 @@ static struct pci_device_id aac_pci_tbl[] = {
 	{ 0x9005, 0x0286, 0x9005, 0x029b, 0, 0, 22 }, /* AAR-2820SA (Intruder) */
 	{ 0x9005, 0x0286, 0x9005, 0x029c, 0, 0, 23 }, /* AAR-2620SA (Intruder) */
 	{ 0x9005, 0x0286, 0x9005, 0x029d, 0, 0, 24 }, /* AAR-2420SA (Intruder) */
-	{ 0x9005, 0x0286, 0x9005, 0x029e, 0, 0, 25 }, /* ICP9024R0 (Lancer) */
-	{ 0x9005, 0x0286, 0x9005, 0x029f, 0, 0, 26 }, /* ICP9014R0 (Lancer) */
+	{ 0x9005, 0x0286, 0x9005, 0x029e, 0, 0, 25 }, /* ICP9024RO (Lancer) */
+	{ 0x9005, 0x0286, 0x9005, 0x029f, 0, 0, 26 }, /* ICP9014RO (Lancer) */
 	{ 0x9005, 0x0286, 0x9005, 0x02a0, 0, 0, 27 }, /* ICP9047MA (Lancer) */
 	{ 0x9005, 0x0286, 0x9005, 0x02a1, 0, 0, 28 }, /* ICP9087MA (Lancer) */
 	{ 0x9005, 0x0286, 0x9005, 0x02a3, 0, 0, 29 }, /* ICP5445AU (Hurricane44) */
@@ -137,15 +137,15 @@ static struct pci_device_id aac_pci_tbl[] = {
 	{ 0x9005, 0x0285, 0x9005, 0x0294, 0, 0, 41 }, /* ESD SO-DIMM PCI-X SATA ZCR (Prowler) */
 	{ 0x9005, 0x0285, 0x103C, 0x3227, 0, 0, 42 }, /* AAR-2610SA PCI SATA 6ch */
 	{ 0x9005, 0x0285, 0x9005, 0x0296, 0, 0, 43 }, /* ASR-2240S (SabreExpress) */
-	{ 0x9005, 0x0285, 0x9005, 0x0297, 0, 0, 44 }, /* ASR-4005SAS */
+	{ 0x9005, 0x0285, 0x9005, 0x0297, 0, 0, 44 }, /* ASR-4005 */
 	{ 0x9005, 0x0285, 0x1014, 0x02F2, 0, 0, 45 }, /* IBM 8i (AvonPark) */
 	{ 0x9005, 0x0285, 0x1014, 0x0312, 0, 0, 45 }, /* IBM 8i (AvonPark Lite) */
 	{ 0x9005, 0x0286, 0x1014, 0x9580, 0, 0, 46 }, /* IBM 8k/8k-l8 (Aurora) */
 	{ 0x9005, 0x0286, 0x1014, 0x9540, 0, 0, 47 }, /* IBM 8k/8k-l4 (Aurora Lite) */
-	{ 0x9005, 0x0285, 0x9005, 0x0298, 0, 0, 48 }, /* ASR-4000SAS (BlackBird) */
+	{ 0x9005, 0x0285, 0x9005, 0x0298, 0, 0, 48 }, /* ASR-4000 (BlackBird) */
 	{ 0x9005, 0x0285, 0x9005, 0x0299, 0, 0, 49 }, /* ASR-4800SAS (Marauder-X) */
 	{ 0x9005, 0x0285, 0x9005, 0x029a, 0, 0, 50 }, /* ASR-4805SAS (Marauder-E) */
-	{ 0x9005, 0x0286, 0x9005, 0x02a2, 0, 0, 51 }, /* ASR-3800SAS (Hurricane44) */
+	{ 0x9005, 0x0286, 0x9005, 0x02a2, 0, 0, 51 }, /* ASR-3800 (Hurricane44) */
 
 	{ 0x9005, 0x0285, 0x1028, 0x0287, 0, 0, 52 }, /* Perc 320/DC*/
 	{ 0x1011, 0x0046, 0x9005, 0x0365, 0, 0, 53 }, /* Adaptec 5400S (Mustang)*/
@@ -193,8 +193,8 @@ static struct aac_driver_ident aac_drivers[] = {
 	{ aac_rkt_init, "aacraid",  "ADAPTEC ", "AAR-2820SA      ", 1 }, /* AAR-2820SA (Intruder) */
 	{ aac_rkt_init, "aacraid",  "ADAPTEC ", "AAR-2620SA      ", 1 }, /* AAR-2620SA (Intruder) */
 	{ aac_rkt_init, "aacraid",  "ADAPTEC ", "AAR-2420SA      ", 1 }, /* AAR-2420SA (Intruder) */
-	{ aac_rkt_init, "aacraid",  "ICP     ", "ICP9024R0       ", 2 }, /* ICP9024R0 (Lancer) */
-	{ aac_rkt_init, "aacraid",  "ICP     ", "ICP9014R0       ", 1 }, /* ICP9014R0 (Lancer) */
+	{ aac_rkt_init, "aacraid",  "ICP     ", "ICP9024RO       ", 2 }, /* ICP9024RO (Lancer) */
+	{ aac_rkt_init, "aacraid",  "ICP     ", "ICP9014RO       ", 1 }, /* ICP9014RO (Lancer) */
 	{ aac_rkt_init, "aacraid",  "ICP     ", "ICP9047MA       ", 1 }, /* ICP9047MA (Lancer) */
 	{ aac_rkt_init, "aacraid",  "ICP     ", "ICP9087MA       ", 1 }, /* ICP9087MA (Lancer) */
 	{ aac_rkt_init, "aacraid",  "ICP     ", "ICP5445AU       ", 1 }, /* ICP5445AU (Hurricane44) */
@@ -212,14 +212,14 @@ static struct aac_driver_ident aac_drivers[] = {
 	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-2026ZCR     ", 1 }, /* ESD SO-DIMM PCI-X SATA ZCR (Prowler) */
 	{ aac_rx_init, "aacraid",  "ADAPTEC ", "AAR-2610SA      ", 1 }, /* SATA 6Ch (Bearcat) */
 	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-2240S       ", 1 }, /* ASR-2240S (SabreExpress) */
-	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-4005SAS     ", 1 }, /* ASR-4005SAS */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-4005        ", 1 }, /* ASR-4005 */
 	{ aac_rx_init, "ServeRAID","IBM     ", "ServeRAID 8i    ", 1 }, /* IBM 8i (AvonPark) */
 	{ aac_rkt_init, "ServeRAID","IBM     ", "ServeRAID 8k-l8 ", 1 }, /* IBM 8k/8k-l8 (Aurora) */
 	{ aac_rkt_init, "ServeRAID","IBM     ", "ServeRAID 8k-l4 ", 1 }, /* IBM 8k/8k-l4 (Aurora Lite) */
-	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-4000SAS     ", 1 }, /* ASR-4000SAS (BlackBird & AvonPark) */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-4000        ", 1 }, /* ASR-4000 (BlackBird & AvonPark) */
 	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-4800SAS     ", 1 }, /* ASR-4800SAS (Marauder-X) */
 	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-4805SAS     ", 1 }, /* ASR-4805SAS (Marauder-E) */
-	{ aac_rkt_init, "aacraid",  "ADAPTEC ", "ASR-3800SAS     ", 1 }, /* ASR-3800SAS (Hurricane44) */
+	{ aac_rkt_init, "aacraid",  "ADAPTEC ", "ASR-3800        ", 1 }, /* ASR-3800 (Hurricane44) */
 
 	{ aac_rx_init, "percraid", "DELL    ", "PERC 320/DC     ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Perc 320/DC*/
 	{ aac_sa_init, "aacraid",  "ADAPTEC ", "Adaptec 5400S   ", 4, AAC_QUIRK_34SG }, /* Adaptec 5400S (Mustang)*/
-- 
cgit v1.2.3


From a96e0c7798057dd8055d0263c076fed975c10237 Mon Sep 17 00:00:00 2001
From: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Date: Tue, 2 Jan 2007 01:07:32 +0100
Subject: [SCSI] scsi: lpfc error path fix

	Add kmalloc failure check and fix the loop on error path. Without the
patch pool element at index [0] will not be freed.

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Acked-by: James Smart <James.Smart@Emulex.Com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/lpfc/lpfc_mem.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c
index 066292d3995a..ec3bbbde6f7a 100644
--- a/drivers/scsi/lpfc/lpfc_mem.c
+++ b/drivers/scsi/lpfc/lpfc_mem.c
@@ -56,6 +56,9 @@ lpfc_mem_alloc(struct lpfc_hba * phba)
 
 	pool->elements = kmalloc(sizeof(struct lpfc_dmabuf) *
 					 LPFC_MBUF_POOL_SIZE, GFP_KERNEL);
+	if (!pool->elements)
+		goto fail_free_lpfc_mbuf_pool;
+
 	pool->max_count = 0;
 	pool->current_count = 0;
 	for ( i = 0; i < LPFC_MBUF_POOL_SIZE; i++) {
@@ -82,10 +85,11 @@ lpfc_mem_alloc(struct lpfc_hba * phba)
  fail_free_mbox_pool:
 	mempool_destroy(phba->mbox_mem_pool);
  fail_free_mbuf_pool:
-	while (--i)
+	while (i--)
 		pci_pool_free(phba->lpfc_mbuf_pool, pool->elements[i].virt,
 						 pool->elements[i].phys);
 	kfree(pool->elements);
+ fail_free_lpfc_mbuf_pool:
 	pci_pool_destroy(phba->lpfc_mbuf_pool);
  fail_free_dma_buf_pool:
 	pci_pool_destroy(phba->lpfc_scsi_dma_buf_pool);
-- 
cgit v1.2.3


From 6397256b0af52082db3b7f804aa3b612a17dcbc9 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 2 Jan 2007 17:41:04 +0900
Subject: [SCSI] sr: fix error code check in sr_block_ioctl()

sr_block_ioctl() should proceed to SCSI ioctls if cdrom_ioctl()
returns -ENOSYS.  However it tested for ENOSYS instead of -ENOSYS
rendering all SCSI ioctls other than GET_IDLUN and GET_BUS_NUMBER
inaccessible.  Fix it.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/sr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index fae6e95a6298..89e9b36b1788 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -468,7 +468,7 @@ static int sr_block_ioctl(struct inode *inode, struct file *file, unsigned cmd,
 	}
 
 	ret = cdrom_ioctl(file, &cd->cdi, inode, cmd, arg);
-	if (ret != ENOSYS)
+	if (ret != -ENOSYS)
 		return ret;
 
 	/*
-- 
cgit v1.2.3


From 4fe48187da5a0229be3951761b66cd426430a52b Mon Sep 17 00:00:00 2001
From: adam radford <aradford@gmail.com>
Date: Thu, 4 Jan 2007 18:16:56 -0800
Subject: [SCSI] 3ware 8000 serialize reset code

The attached patch updates the 3ware 8000 driver:

- Free irq handler in __tw_shutdown().
- Turn on RCD bit for caching mode page.
- Serialize reset code.

Signed-off-by: Adam Radford <linuxraid@amcc.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/3w-xxxx.c | 60 ++++++++++++++++++++++++--------------------------
 drivers/scsi/3w-xxxx.h |  2 +-
 2 files changed, 30 insertions(+), 32 deletions(-)

(limited to 'drivers')

diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c
index 99a259c5a0c0..e1b44d6c0c32 100644
--- a/drivers/scsi/3w-xxxx.c
+++ b/drivers/scsi/3w-xxxx.c
@@ -6,7 +6,7 @@
    		     Arnaldo Carvalho de Melo <acme@conectiva.com.br>
                      Brad Strand <linux@3ware.com>
 
-   Copyright (C) 1999-2005 3ware Inc.
+   Copyright (C) 1999-2007 3ware Inc.
 
    Kernel compatiblity By: 	Andre Hedrick <andre@suse.com>
    Non-Copyright (C) 2000	Andre Hedrick <andre@suse.com>
@@ -191,6 +191,9 @@
                  before shutting down card.
                  Change to new 'change_queue_depth' api.
                  Fix 'handled=1' ISR usage, remove bogus IRQ check.
+   1.26.02.002 - Free irq handler in __tw_shutdown().
+                 Turn on RCD bit for caching mode page.
+                 Serialize reset code.
 */
 
 #include <linux/module.h>
@@ -214,7 +217,7 @@
 #include "3w-xxxx.h"
 
 /* Globals */
-#define TW_DRIVER_VERSION "1.26.02.001"
+#define TW_DRIVER_VERSION "1.26.02.002"
 static TW_Device_Extension *tw_device_extension_list[TW_MAX_SLOT];
 static int tw_device_extension_count = 0;
 static int twe_major = -1;
@@ -226,7 +229,7 @@ MODULE_LICENSE("GPL");
 MODULE_VERSION(TW_DRIVER_VERSION);
 
 /* Function prototypes */
-static int tw_reset_device_extension(TW_Device_Extension *tw_dev, int ioctl_reset);
+static int tw_reset_device_extension(TW_Device_Extension *tw_dev);
 
 /* Functions */
 
@@ -984,24 +987,12 @@ static int tw_chrdev_ioctl(struct inode *inode, struct file *file, unsigned int
 			/* Now wait for the command to complete */
 			timeout = wait_event_timeout(tw_dev->ioctl_wqueue, tw_dev->chrdev_request_id == TW_IOCTL_CHRDEV_FREE, timeout);
 
-			/* See if we reset while waiting for the ioctl to complete */
-			if (test_bit(TW_IN_RESET, &tw_dev->flags)) {
-				clear_bit(TW_IN_RESET, &tw_dev->flags);
-				retval = -ERESTARTSYS;
-				goto out2;
-			}
-
 			/* We timed out, and didn't get an interrupt */
 			if (tw_dev->chrdev_request_id != TW_IOCTL_CHRDEV_FREE) {
 				/* Now we need to reset the board */
 				printk(KERN_WARNING "3w-xxxx: scsi%d: Character ioctl (0x%x) timed out, resetting card.\n", tw_dev->host->host_no, cmd);
 				retval = -EIO;
-				spin_lock_irqsave(tw_dev->host->host_lock, flags);
-				tw_dev->state[request_id] = TW_S_COMPLETED;
-				tw_state_request_finish(tw_dev, request_id);
-				tw_dev->posted_request_count--;
-				spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
-				if (tw_reset_device_extension(tw_dev, 1)) {
+				if (tw_reset_device_extension(tw_dev)) {
 					printk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl(): Reset failed for card %d.\n", tw_dev->host->host_no);
 				}
 				goto out2;
@@ -1336,7 +1327,7 @@ static void tw_unmap_scsi_data(struct pci_dev *pdev, struct scsi_cmnd *cmd)
 } /* End tw_unmap_scsi_data() */
 
 /* This function will reset a device extension */
-static int tw_reset_device_extension(TW_Device_Extension *tw_dev, int ioctl_reset) 
+static int tw_reset_device_extension(TW_Device_Extension *tw_dev)
 {
 	int i = 0;
 	struct scsi_cmnd *srb;
@@ -1382,15 +1373,10 @@ static int tw_reset_device_extension(TW_Device_Extension *tw_dev, int ioctl_rese
 		printk(KERN_WARNING "3w-xxxx: scsi%d: Reset sequence failed.\n", tw_dev->host->host_no);
 		return 1;
 	}
-	TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev);
 
-	/* Wake up any ioctl that was pending before the reset */
-	if ((tw_dev->chrdev_request_id == TW_IOCTL_CHRDEV_FREE) || (ioctl_reset)) {
-		clear_bit(TW_IN_RESET, &tw_dev->flags);
-	} else {
-		tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
-		wake_up(&tw_dev->ioctl_wqueue);
-	}
+	TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev);
+	clear_bit(TW_IN_RESET, &tw_dev->flags);
+	tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
 
 	return 0;
 } /* End tw_reset_device_extension() */
@@ -1437,14 +1423,18 @@ static int tw_scsi_eh_reset(struct scsi_cmnd *SCpnt)
 		"WARNING: Command (0x%x) timed out, resetting card.\n",
 		SCpnt->cmnd[0]);
 
+	/* Make sure we are not issuing an ioctl or resetting from ioctl */
+	mutex_lock(&tw_dev->ioctl_lock);
+
 	/* Now reset the card and some of the device extension data */
-	if (tw_reset_device_extension(tw_dev, 0)) {
+	if (tw_reset_device_extension(tw_dev)) {
 		printk(KERN_WARNING "3w-xxxx: scsi%d: Reset failed.\n", tw_dev->host->host_no);
 		goto out;
 	}
 
 	retval = SUCCESS;
 out:
+	mutex_unlock(&tw_dev->ioctl_lock);
 	return retval;
 } /* End tw_scsi_eh_reset() */
 
@@ -1660,9 +1650,9 @@ static int tw_scsiop_mode_sense_complete(TW_Device_Extension *tw_dev, int reques
 	request_buffer[4] = 0x8;        /* caching page */
 	request_buffer[5] = 0xa;        /* page length */
 	if (*flags & 0x1)
-		request_buffer[6] = 0x4;        /* WCE on */
+		request_buffer[6] = 0x5;        /* WCE on, RCD on */
 	else
-		request_buffer[6] = 0x0;        /* WCE off */
+		request_buffer[6] = 0x1;        /* WCE off, RCD on */
 	tw_transfer_internal(tw_dev, request_id, request_buffer,
 			     sizeof(request_buffer));
 
@@ -2012,6 +2002,10 @@ static int tw_scsi_queue(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd
 	int retval = 1;
 	TW_Device_Extension *tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
 
+	/* If we are resetting due to timed out ioctl, report as busy */
+	if (test_bit(TW_IN_RESET, &tw_dev->flags))
+		return SCSI_MLQUEUE_HOST_BUSY;
+
 	/* Save done function into Scsi_Cmnd struct */
 	SCpnt->scsi_done = done;
 		 
@@ -2100,6 +2094,10 @@ static irqreturn_t tw_interrupt(int irq, void *dev_instance)
 
 	handled = 1;
 
+	/* If we are resetting, bail */
+	if (test_bit(TW_IN_RESET, &tw_dev->flags))
+		goto tw_interrupt_bail;
+
 	/* Check controller for errors */
 	if (tw_check_bits(status_reg_value)) {
 		dprintk(KERN_WARNING "3w-xxxx: tw_interrupt(): Unexpected bits.\n");
@@ -2276,6 +2274,9 @@ static void __tw_shutdown(TW_Device_Extension *tw_dev)
 	/* Disable interrupts */
 	TW_DISABLE_INTERRUPTS(tw_dev);
 
+	/* Free up the IRQ */
+	free_irq(tw_dev->tw_pci_dev->irq, tw_dev);
+
 	printk(KERN_WARNING "3w-xxxx: Shutting down host %d.\n", tw_dev->host->host_no);
 
 	/* Tell the card we are shutting down */
@@ -2444,9 +2445,6 @@ static void tw_remove(struct pci_dev *pdev)
 		twe_major = -1;
 	}
 
-	/* Free up the IRQ */
-	free_irq(tw_dev->tw_pci_dev->irq, tw_dev);
-
 	/* Shutdown the card */
 	__tw_shutdown(tw_dev);
 
diff --git a/drivers/scsi/3w-xxxx.h b/drivers/scsi/3w-xxxx.h
index bbd654a2b9b1..0742e6846656 100644
--- a/drivers/scsi/3w-xxxx.h
+++ b/drivers/scsi/3w-xxxx.h
@@ -6,7 +6,7 @@
    		     Arnaldo Carvalho de Melo <acme@conectiva.com.br>
                      Brad Strand <linux@3ware.com>
 
-   Copyright (C) 1999-2005 3ware Inc.
+   Copyright (C) 1999-2007 3ware Inc.
 
    Kernel compatiblity By:	Andre Hedrick <andre@suse.com>
    Non-Copyright (C) 2000	Andre Hedrick <andre@suse.com>
-- 
cgit v1.2.3


From 3d6d174a0888fe082e87ce1d4a0f1a85044a4515 Mon Sep 17 00:00:00 2001
From: Sumant Patro <sumantp@lsil.com>
Date: Fri, 29 Dec 2006 08:13:54 -0800
Subject: [SCSI] megaraid_sas: Update module author

Update domain name change from lsil.com to lsi.com.
Change module author to megaraidlinux@lsi.com

Signed-off-by: Sumant Patro <sumant.patro@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/megaraid/megaraid_sas.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index 046223b4ae57..b5bdd0d7a8bf 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -13,8 +13,8 @@
  * Version	: v00.00.03.05
  *
  * Authors:
- * 	Sreenivas Bagalkote	<Sreenivas.Bagalkote@lsil.com>
- * 	Sumant Patro		<Sumant.Patro@lsil.com>
+ * 	Sreenivas Bagalkote	<Sreenivas.Bagalkote@lsi.com>
+ * 	Sumant Patro		<Sumant.Patro@lsi.com>
  *
  * List of supported controllers
  *
@@ -45,7 +45,7 @@
 
 MODULE_LICENSE("GPL");
 MODULE_VERSION(MEGASAS_VERSION);
-MODULE_AUTHOR("sreenivas.bagalkote@lsil.com");
+MODULE_AUTHOR("megaraidlinux@lsi.com");
 MODULE_DESCRIPTION("LSI Logic MegaRAID SAS Driver");
 
 /*
-- 
cgit v1.2.3


From 86dd424266530cda55258b2b33d04c23a88b9a9c Mon Sep 17 00:00:00 2001
From: Eric Moore <eric.moore@lsil.com>
Date: Thu, 4 Jan 2007 20:44:01 -0700
Subject: [SCSI] fusion: fibre channel: return DID_ERROR for
 MPI_IOCSTATUS_SCSI_IOC_TERMINATED

A repost of a patch forwarded by Mikael Reed from 2006-12-20.

The fibre channel IOC may kill a request for a variety of
reasons, some of which may be recovered by a retry, some of
which are unlikely to be recovered.  Return DID_ERROR
instead of DID_RESET to permit retry of the command,
just not an infinite number of them.

Signed-off-by: Michael Reed <mdr@sgi.com>
Signed-off-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/message/fusion/mptscsih.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

(limited to 'drivers')

diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 2c72c36b8171..076eb2b573a3 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -701,6 +701,17 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 						break;
 					}
 				}
+			} else if (ioc->bus_type == FC) {
+				/*
+				 * The FC IOC may kill a request for variety of
+				 * reasons, some of which may be recovered by a
+				 * retry, some which are unlikely to be
+				 * recovered. Return DID_ERROR instead of
+				 * DID_RESET to permit retry of the command,
+				 * just not an infinite number of them
+				 */
+				sc->result = DID_ERROR << 16;
+				break;
 			}
 
 			/*
-- 
cgit v1.2.3


From f99be43b3024f2dd054f2addd54a318eabee2018 Mon Sep 17 00:00:00 2001
From: Eric Moore <eric.moore@lsil.com>
Date: Thu, 4 Jan 2007 20:46:54 -0700
Subject: [SCSI] fusion: power pc and miscellaneous bug fixs

* Endian fix's for warnings found in ppc environment.
* Fix compile time warning when calling scsi_device_reprobe, where
in newer kernels this API expects its return value to be examined.
* Fix compile errors when debug messages are enabled.

Signed-off-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/message/fusion/mptbase.h  |  2 +-
 drivers/message/fusion/mptsas.c   | 33 ++++++++++++++++++---------------
 drivers/message/fusion/mptscsih.c |  5 +++--
 3 files changed, 22 insertions(+), 18 deletions(-)

(limited to 'drivers')

diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index a4afad4ecab2..da82de65dbc5 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -1059,7 +1059,7 @@ extern int		  mpt_stm_index;	/* needed by mptstm.c */
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 #endif		/* } __KERNEL__ */
 
-#if defined(__alpha__) || defined(__sparc_v9__) || defined(__ia64__) || defined(__x86_64__)
+#if defined(__alpha__) || defined(__sparc_v9__) || defined(__ia64__) || defined(__x86_64__) || defined(__powerpc__)
 #define CAST_U32_TO_PTR(x)	((void *)(u64)x)
 #define CAST_PTR_TO_U32(x)	((u32)(u64)x)
 #else
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 4f0c530e47b0..f49f12515c50 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -245,7 +245,8 @@ static void mptsas_print_device_pg0(SasDevicePage0_t *pg0)
 	printk("Parent Handle=0x%X\n" ,le16_to_cpu(pg0->ParentDevHandle));
 	printk("Enclosure Handle=0x%X\n", le16_to_cpu(pg0->EnclosureHandle));
 	printk("Slot=0x%X\n", le16_to_cpu(pg0->Slot));
-	printk("SAS Address=0x%llX\n", le64_to_cpu(sas_address));
+	printk("SAS Address=0x%llX\n", (unsigned long long)
+	    le64_to_cpu(sas_address));
 	printk("Target ID=0x%X\n", pg0->TargetID);
 	printk("Bus=0x%X\n", pg0->Bus);
 	/* The PhyNum field specifies the PHY number of the parent
@@ -349,9 +350,9 @@ mptsas_port_delete(struct mptsas_portinfo_details * port_details)
 	phy_info = port_info->phy_info;
 
 	dsaswideprintk((KERN_DEBUG "%s: [%p]: num_phys=%02d "
-	    	"bitmask=0x%016llX\n",
-		__FUNCTION__, port_details, port_details->num_phys,
-		    port_details->phy_bitmask));
+	    "bitmask=0x%016llX\n", __FUNCTION__, port_details,
+	    port_details->num_phys, (unsigned long long)
+	    port_details->phy_bitmask));
 
 	for (i = 0; i < port_info->num_phys; i++, phy_info++) {
 		if(phy_info->port_details != port_details)
@@ -476,7 +477,7 @@ mptsas_setup_wide_ports(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
 	for (i = 0 ; i < port_info->num_phys ; i++, phy_info++) {
 		sas_address = phy_info->attached.sas_address;
 		dsaswideprintk((KERN_DEBUG "phy_id=%d sas_address=0x%018llX\n",
-			i, sas_address));
+		    i, (unsigned long long)sas_address));
 		if (!sas_address)
 			continue;
 		port_details = phy_info->port_details;
@@ -495,8 +496,8 @@ mptsas_setup_wide_ports(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
 				    (1 << phy_info->phy_id);
 			phy_info->sas_port_add_phy=1;
 			dsaswideprintk((KERN_DEBUG "\t\tForming port\n\t\t"
-				"phy_id=%d sas_address=0x%018llX\n",
-				i, sas_address));
+			    "phy_id=%d sas_address=0x%018llX\n",
+			    i, (unsigned long long)sas_address));
 			phy_info->port_details = port_details;
 		}
 
@@ -512,8 +513,9 @@ mptsas_setup_wide_ports(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
 			if (phy_info_cmp->port_details == port_details )
 				continue;
 			dsaswideprintk((KERN_DEBUG
-				"\t\tphy_id=%d sas_address=0x%018llX\n",
-				j, phy_info_cmp->attached.sas_address));
+			    "\t\tphy_id=%d sas_address=0x%018llX\n",
+			    j, (unsigned long long)
+			    phy_info_cmp->attached.sas_address));
 			if (phy_info_cmp->port_details) {
 				port_details->rphy =
 				    mptsas_get_rphy(phy_info_cmp);
@@ -546,11 +548,10 @@ mptsas_setup_wide_ports(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
 		if (!port_details)
 			continue;
 		dsaswideprintk((KERN_DEBUG
-			"%s: [%p]: phy_id=%02d num_phys=%02d "
-		    	"bitmask=0x%016llX\n",
-			__FUNCTION__,
-			port_details, i, port_details->num_phys,
-			port_details->phy_bitmask));
+		    "%s: [%p]: phy_id=%02d num_phys=%02d "
+		    "bitmask=0x%016llX\n", __FUNCTION__,
+		    port_details, i, port_details->num_phys,
+		    (unsigned long long)port_details->phy_bitmask));
 		dsaswideprintk((KERN_DEBUG"\t\tport = %p rphy=%p\n",
 			port_details->port, port_details->rphy));
 	}
@@ -2079,8 +2080,10 @@ mptsas_persist_clear_table(struct work_struct *work)
 static void
 mptsas_reprobe_lun(struct scsi_device *sdev, void *data)
 {
+	int rc;
+
 	sdev->no_uld_attach = data ? 1 : 0;
-	scsi_device_reprobe(sdev);
+	rc = scsi_device_reprobe(sdev);
 }
 
 static void
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 076eb2b573a3..d70cb11de5c9 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -2699,7 +2699,8 @@ mptscsih_initTarget(MPT_SCSI_HOST *hd, VirtTarget *vtarget,
 		    struct scsi_device *sdev)
 {
 	dinitprintk((MYIOC_s_INFO_FMT "initTarget bus=%d id=%d lun=%d hd=%p\n",
-		hd->ioc->name, vtarget->bus_id, vtarget->target_id, lun, hd));
+		hd->ioc->name, vtarget->bus_id, vtarget->target_id,
+		sdev->lun, hd));
 
 	/* Is LUN supported? If so, upper 2 bits will be 0
 	* in first byte of inquiry data.
@@ -2781,7 +2782,7 @@ mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target,
 				else {
 					factor = MPT_ULTRA320;
 					if (scsi_device_qas(sdev)) {
-						ddvtprintk((KERN_INFO "Enabling QAS due to byte56=%02x on id=%d!\n", byte56, id));
+						ddvtprintk((KERN_INFO "Enabling QAS due to byte56=%02x on id=%d!\n", scsi_device_qas(sdev), id));
 						noQas = 0;
 					}
 					if (sdev->type == TYPE_TAPE &&
-- 
cgit v1.2.3


From 9f4203b357d46a66c042df3dedf277ccaa5e2b1d Mon Sep 17 00:00:00 2001
From: Eric Moore <eric.moore@lsil.com>
Date: Thu, 4 Jan 2007 20:47:47 -0700
Subject: [SCSI] fusion: MODULE_VERSION support

* Add modinfo driver version support.
* Change copyright year to 2007.

Signed-off-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/message/fusion/mptbase.c  | 3 ++-
 drivers/message/fusion/mptbase.h  | 4 ++--
 drivers/message/fusion/mptctl.c   | 5 +++--
 drivers/message/fusion/mptctl.h   | 2 +-
 drivers/message/fusion/mptfc.c    | 3 ++-
 drivers/message/fusion/mptlan.c   | 4 +++-
 drivers/message/fusion/mptlan.h   | 2 +-
 drivers/message/fusion/mptsas.c   | 5 +++--
 drivers/message/fusion/mptscsih.c | 3 ++-
 drivers/message/fusion/mptscsih.h | 2 +-
 drivers/message/fusion/mptspi.c   | 3 ++-
 11 files changed, 22 insertions(+), 14 deletions(-)

(limited to 'drivers')

diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 6e068cf1049b..b3f28a03b6a9 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -5,7 +5,7 @@
  *      For use with LSI Logic PCI chip/adapter(s)
  *      running LSI Logic Fusion MPT (Message Passing Technology) firmware.
  *
- *  Copyright (c) 1999-2005 LSI Logic Corporation
+ *  Copyright (c) 1999-2007 LSI Logic Corporation
  *  (mailto:mpt_linux_developer@lsil.com)
  *
  */
@@ -73,6 +73,7 @@
 MODULE_AUTHOR(MODULEAUTHOR);
 MODULE_DESCRIPTION(my_NAME);
 MODULE_LICENSE("GPL");
+MODULE_VERSION(my_VERSION);
 
 /*
  *  cmd line parameters
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index da82de65dbc5..ac0ee1d9a8cf 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -5,7 +5,7 @@
  *          LSIFC9xx/LSI409xx Fibre Channel
  *      running LSI Logic Fusion MPT (Message Passing Technology) firmware.
  *
- *  Copyright (c) 1999-2005 LSI Logic Corporation
+ *  Copyright (c) 1999-2007 LSI Logic Corporation
  *  (mailto:mpt_linux_developer@lsil.com)
  *
  */
@@ -72,7 +72,7 @@
 #endif
 
 #ifndef COPYRIGHT
-#define COPYRIGHT	"Copyright (c) 1999-2005 " MODULEAUTHOR
+#define COPYRIGHT	"Copyright (c) 1999-2007 " MODULEAUTHOR
 #endif
 
 #define MPT_LINUX_VERSION_COMMON	"3.04.02"
diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c
index 30975ccd9947..504632da4347 100644
--- a/drivers/message/fusion/mptctl.c
+++ b/drivers/message/fusion/mptctl.c
@@ -4,7 +4,7 @@
  *      For use with LSI Logic PCI chip/adapters
  *      running LSI Logic Fusion MPT (Message Passing Technology) firmware.
  *
- *  Copyright (c) 1999-2005 LSI Logic Corporation
+ *  Copyright (c) 1999-2007 LSI Logic Corporation
  *  (mailto:mpt_linux_developer@lsil.com)
  *
  */
@@ -66,7 +66,7 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_tcq.h>
 
-#define COPYRIGHT	"Copyright (c) 1999-2005 LSI Logic Corporation"
+#define COPYRIGHT	"Copyright (c) 1999-2007 LSI Logic Corporation"
 #define MODULEAUTHOR	"LSI Logic Corporation"
 #include "mptbase.h"
 #include "mptctl.h"
@@ -79,6 +79,7 @@
 MODULE_AUTHOR(MODULEAUTHOR);
 MODULE_DESCRIPTION(my_NAME);
 MODULE_LICENSE("GPL");
+MODULE_VERSION(my_VERSION);
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 
diff --git a/drivers/message/fusion/mptctl.h b/drivers/message/fusion/mptctl.h
index 043941882c6e..e65a1cf5eb0b 100644
--- a/drivers/message/fusion/mptctl.h
+++ b/drivers/message/fusion/mptctl.h
@@ -5,7 +5,7 @@
  *          LSIFC9xx/LSI409xx Fibre Channel
  *      running LSI Logic Fusion MPT (Message Passing Technology) firmware.
  *
- *  Copyright (c) 1999-2005 LSI Logic Corporation
+ *  Copyright (c) 1999-2007 LSI Logic Corporation
  *  (mailto:mpt_linux_developer@lsil.com)
  *
  */
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index ca2f9107f145..c819c23b55b1 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -3,7 +3,7 @@
  *      For use with LSI Logic PCI chip/adapter(s)
  *      running LSI Logic Fusion MPT (Message Passing Technology) firmware.
  *
- *  Copyright (c) 1999-2005 LSI Logic Corporation
+ *  Copyright (c) 1999-2007 LSI Logic Corporation
  *  (mailto:mpt_linux_developer@lsil.com)
  *
  */
@@ -75,6 +75,7 @@
 MODULE_AUTHOR(MODULEAUTHOR);
 MODULE_DESCRIPTION(my_NAME);
 MODULE_LICENSE("GPL");
+MODULE_VERSION(my_VERSION);
 
 /* Command line args */
 #define MPTFC_DEV_LOSS_TMO (60)
diff --git a/drivers/message/fusion/mptlan.c b/drivers/message/fusion/mptlan.c
index b7c4407c5e3f..2936204d8ad6 100644
--- a/drivers/message/fusion/mptlan.c
+++ b/drivers/message/fusion/mptlan.c
@@ -4,7 +4,7 @@
  *      For use with LSI Logic Fibre Channel PCI chip/adapters
  *      running LSI Logic Fusion MPT (Message Passing Technology) firmware.
  *
- *  Copyright (c) 2000-2005 LSI Logic Corporation
+ *  Copyright (c) 2000-2007 LSI Logic Corporation
  *
  */
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -56,9 +56,11 @@
 #include <linux/module.h>
 #include <linux/fs.h>
 
+#define my_VERSION	MPT_LINUX_VERSION_COMMON
 #define MYNAM		"mptlan"
 
 MODULE_LICENSE("GPL");
+MODULE_VERSION(my_VERSION);
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
diff --git a/drivers/message/fusion/mptlan.h b/drivers/message/fusion/mptlan.h
index 3726ecba5707..70ab75e7c263 100644
--- a/drivers/message/fusion/mptlan.h
+++ b/drivers/message/fusion/mptlan.h
@@ -4,7 +4,7 @@
  *      For use with LSI Logic Fibre Channel PCI chip/adapters
  *      running LSI Logic Fusion MPT (Message Passing Technology) firmware.
  *
- *  Copyright (c) 2000-2005 LSI Logic Corporation
+ *  Copyright (c) 2000-2007 LSI Logic Corporation
  *
  */
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index f49f12515c50..09e9a9d96410 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -3,9 +3,9 @@
  *      For use with LSI Logic PCI chip/adapter(s)
  *      running LSI Logic Fusion MPT (Message Passing Technology) firmware.
  *
- *  Copyright (c) 1999-2005 LSI Logic Corporation
+ *  Copyright (c) 1999-2007 LSI Logic Corporation
  *  (mailto:mpt_linux_developer@lsil.com)
- *  Copyright (c) 2005-2006 Dell
+ *  Copyright (c) 2005-2007 Dell
  */
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
@@ -75,6 +75,7 @@
 MODULE_AUTHOR(MODULEAUTHOR);
 MODULE_DESCRIPTION(my_NAME);
 MODULE_LICENSE("GPL");
+MODULE_VERSION(my_VERSION);
 
 static int mpt_pt_clear;
 module_param(mpt_pt_clear, int, 0);
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index d70cb11de5c9..f0cca3ea93b2 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -3,7 +3,7 @@
  *      For use with LSI Logic PCI chip/adapter(s)
  *      running LSI Logic Fusion MPT (Message Passing Technology) firmware.
  *
- *  Copyright (c) 1999-2005 LSI Logic Corporation
+ *  Copyright (c) 1999-2007 LSI Logic Corporation
  *  (mailto:mpt_linux_developer@lsil.com)
  *
  */
@@ -76,6 +76,7 @@
 MODULE_AUTHOR(MODULEAUTHOR);
 MODULE_DESCRIPTION(my_NAME);
 MODULE_LICENSE("GPL");
+MODULE_VERSION(my_VERSION);
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 
diff --git a/drivers/message/fusion/mptscsih.h b/drivers/message/fusion/mptscsih.h
index 14a5b6c2e2bd..187c8af0890b 100644
--- a/drivers/message/fusion/mptscsih.h
+++ b/drivers/message/fusion/mptscsih.h
@@ -5,7 +5,7 @@
  *          LSIFC9xx/LSI409xx Fibre Channel
  *      running LSI Logic Fusion MPT (Message Passing Technology) firmware.
  *
- *  Copyright (c) 1999-2005 LSI Logic Corporation
+ *  Copyright (c) 1999-2007 LSI Logic Corporation
  *  (mailto:mpt_linux_developer@lsil.com)
  *
  */
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 36641da59289..203c661d2c79 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -3,7 +3,7 @@
  *      For use with LSI Logic PCI chip/adapter(s)
  *      running LSI Logic Fusion MPT (Message Passing Technology) firmware.
  *
- *  Copyright (c) 1999-2005 LSI Logic Corporation
+ *  Copyright (c) 1999-2007 LSI Logic Corporation
  *  (mailto:mpt_linux_developer@lsil.com)
  *
  */
@@ -77,6 +77,7 @@
 MODULE_AUTHOR(MODULEAUTHOR);
 MODULE_DESCRIPTION(my_NAME);
 MODULE_LICENSE("GPL");
+MODULE_VERSION(my_VERSION);
 
 /* Command line args */
 static int mpt_saf_te = MPTSCSIH_SAF_TE;
-- 
cgit v1.2.3


From d0a6b08ae08c2ab292f756bdae0e8b1242696d7f Mon Sep 17 00:00:00 2001
From: Eric Moore <eric.moore@lsil.com>
Date: Thu, 4 Jan 2007 20:49:03 -0700
Subject: [SCSI] fusion: bump version

bump version

Signed-off-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/message/fusion/mptbase.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index ac0ee1d9a8cf..e316708f76bd 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -75,8 +75,8 @@
 #define COPYRIGHT	"Copyright (c) 1999-2007 " MODULEAUTHOR
 #endif
 
-#define MPT_LINUX_VERSION_COMMON	"3.04.02"
-#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-3.04.02"
+#define MPT_LINUX_VERSION_COMMON	"3.04.03"
+#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-3.04.03"
 #define WHAT_MAGIC_STRING		"@" "(" "#" ")"
 
 #define show_mptmod_ver(s,ver)  \
-- 
cgit v1.2.3


From 3ef49a3b45c33b055002402f01e5da98cb773086 Mon Sep 17 00:00:00 2001
From: Jes Sorensen <jes@sgi.com>
Date: Fri, 5 Jan 2007 12:05:37 -0500
Subject: [SCSI] qla1280: set residual correctly

Jeremy caught a bug in the qla1280 driver where it didn't set the
residual value correctly.

Signed-off-by: Jeremy Higdon <jeremy@sgi.com>
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
---
 drivers/scsi/qla1280.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 16af5b79e587..1548d42a3b43 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -1341,7 +1341,7 @@ qla1280_return_status(struct response * sts, struct scsi_cmnd *cp)
 	int host_status = DID_ERROR;
 	uint16_t comp_status = le16_to_cpu(sts->comp_status);
 	uint16_t state_flags = le16_to_cpu(sts->state_flags);
-	uint16_t residual_length = le32_to_cpu(sts->residual_length);
+	uint32_t residual_length = le32_to_cpu(sts->residual_length);
 	uint16_t scsi_status = le16_to_cpu(sts->scsi_status);
 #if DEBUG_QLA1280_INTR
 	static char *reason[] = {
@@ -1413,8 +1413,10 @@ qla1280_return_status(struct response * sts, struct scsi_cmnd *cp)
 			       "scsi: Underflow detected - retrying "
 			       "command.\n");
 			host_status = DID_ERROR;
-		} else
+		} else {
+			cp->resid = residual_length;
 			host_status = DID_OK;
+		}
 		break;
 
 	default:
-- 
cgit v1.2.3