From dd59b8537f6cb53ab863fafad86a5828f1e889a2 Mon Sep 17 00:00:00 2001 From: Yuri Tikhonov Date: Mon, 12 Jan 2009 15:17:20 -0700 Subject: dmaengine: fix dependency chaining In dmaengine we track the dependencies between the descriptors using the 'next' pointers of the structure. These pointers are set to NULL as soon as the corresponding descriptor has been submitted to the channel (in dma_run_dependencies()). But, the first 'next' in chain is still remaining set, regardless the fact, that tx->next has been already submitted. This may lead to multiple submissions of the same descriptor. This patch fixes this. Actually, some previous implementation of the xxx_run_dependencies() function already had this fix in place. The fdb..0eaf3 commit, beside the correct things, broke this. Cc: Signed-off-by: Yuri Tikhonov Signed-off-by: Dan Williams --- drivers/dma/dmaengine.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index 403dbe781122..6df144a65fef 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -961,6 +961,8 @@ void dma_run_dependencies(struct dma_async_tx_descriptor *tx) if (!dep) return; + /* we'll submit tx->next now, so clear the link */ + tx->next = NULL; chan = dep->chan; /* keep submitting up until a channel switch is detected -- cgit v1.2.3 From 6527de6d6d25ebfae7c7572cb7a4ed768e2e20a5 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 12 Jan 2009 15:18:34 -0700 Subject: fsldma: use a valid 'device' for dma_pool_create The dmaengine sysfs implementation was fixed to support proper lifetime rules which means that the current: new_fsl_chan->dev = &new_fsl_chan->common.dev->device; ...retrieves a NULL pointer because new_fsl_chan->common.dev has not been allocated at this point. So, set new_fsl_chan->dev to a valid device. Cc: Li Yang Cc: Zhang Wei Reported-by: Ira Snyder Tested-by: Ira Snyder Signed-off-by: Dan Williams --- drivers/dma/fsldma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index ca70a21afc68..748e140c5a18 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -822,7 +822,7 @@ static int __devinit fsl_dma_chan_probe(struct fsl_dma_device *fdev, */ WARN_ON(fdev->feature != new_fsl_chan->feature); - new_fsl_chan->dev = &new_fsl_chan->common.dev->device; + new_fsl_chan->dev = fdev->dev; new_fsl_chan->reg_base = ioremap(new_fsl_chan->reg.start, new_fsl_chan->reg.end - new_fsl_chan->reg.start + 1); -- cgit v1.2.3 From d86be86e9aab221089d72399072511f13fe2a771 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 13 Jan 2009 09:22:20 -0700 Subject: dmatest: Use custom map/unmap for destination buffer The dmatest driver should use DMA_BIDIRECTIONAL on the destination buffer to ensure that the poison values are written to RAM and not just written to cache and discarded. Acked-by: Haavard Skinnemoen Acked-by: Maciej Sosnowski Signed-off-by: Atsushi Nemoto Signed-off-by: Dan Williams --- drivers/dma/dmatest.c | 35 +++++++++++++++++++++++++++++++---- 1 file changed, 31 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index 3603f1ea5b28..732fa1ec36ab 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -217,6 +217,10 @@ static int dmatest_func(void *data) chan = thread->chan; while (!kthread_should_stop()) { + struct dma_device *dev = chan->device; + struct dma_async_tx_descriptor *tx; + dma_addr_t dma_src, dma_dest; + total_tests++; len = dmatest_random() % test_buf_size + 1; @@ -226,10 +230,30 @@ static int dmatest_func(void *data) dmatest_init_srcbuf(thread->srcbuf, src_off, len); dmatest_init_dstbuf(thread->dstbuf, dst_off, len); - cookie = dma_async_memcpy_buf_to_buf(chan, - thread->dstbuf + dst_off, - thread->srcbuf + src_off, - len); + dma_src = dma_map_single(dev->dev, thread->srcbuf + src_off, + len, DMA_TO_DEVICE); + /* map with DMA_BIDIRECTIONAL to force writeback/invalidate */ + dma_dest = dma_map_single(dev->dev, thread->dstbuf, + test_buf_size, DMA_BIDIRECTIONAL); + + tx = dev->device_prep_dma_memcpy(chan, dma_dest + dst_off, + dma_src, len, + DMA_CTRL_ACK | DMA_COMPL_SKIP_DEST_UNMAP); + if (!tx) { + dma_unmap_single(dev->dev, dma_src, len, DMA_TO_DEVICE); + dma_unmap_single(dev->dev, dma_dest, + test_buf_size, DMA_BIDIRECTIONAL); + pr_warning("%s: #%u: prep error with src_off=0x%x " + "dst_off=0x%x len=0x%x\n", + thread_name, total_tests - 1, + src_off, dst_off, len); + msleep(100); + failed_tests++; + continue; + } + tx->callback = NULL; + cookie = tx->tx_submit(tx); + if (dma_submit_error(cookie)) { pr_warning("%s: #%u: submit error %d with src_off=0x%x " "dst_off=0x%x len=0x%x\n", @@ -253,6 +277,9 @@ static int dmatest_func(void *data) failed_tests++; continue; } + /* Unmap by myself (see DMA_COMPL_SKIP_DEST_UNMAP above) */ + dma_unmap_single(dev->dev, dma_dest, + test_buf_size, DMA_BIDIRECTIONAL); error_count = 0; -- cgit v1.2.3 From b8a1b1ce14252b59b2d5c89de25b54f9bfd4cc5e Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 14 Jan 2009 14:55:41 -0800 Subject: IPoIB: Fix hang in napi_disable() if P_Key is never found After commit fe25c561 ("IPoIB: Don't enable NAPI when it's already enabled"), if an interface is brought up but the corresponding P_Key never appears, then ipoib_stop() will hang in napi_disable(), because ipoib_open() returns before it does napi_enable(). Fix this by changing ipoib_open() to call napi_enable() even if the P_Key isn't present. Reported-by: Yossi Etigin Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index dce0443f9d69..0bd2a4ff0842 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -106,23 +106,17 @@ int ipoib_open(struct net_device *dev) ipoib_dbg(priv, "bringing up interface\n"); - set_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags); + if (!test_and_set_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags)) + napi_enable(&priv->napi); if (ipoib_pkey_dev_delay_open(dev)) return 0; - napi_enable(&priv->napi); + if (ipoib_ib_dev_open(dev)) + goto err_disable; - if (ipoib_ib_dev_open(dev)) { - napi_disable(&priv->napi); - return -EINVAL; - } - - if (ipoib_ib_dev_up(dev)) { - ipoib_ib_dev_stop(dev, 1); - napi_disable(&priv->napi); - return -EINVAL; - } + if (ipoib_ib_dev_up(dev)) + goto err_stop; if (!test_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags)) { struct ipoib_dev_priv *cpriv; @@ -144,6 +138,15 @@ int ipoib_open(struct net_device *dev) netif_start_queue(dev); return 0; + +err_stop: + ipoib_ib_dev_stop(dev, 1); + +err_disable: + napi_disable(&priv->napi); + clear_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags); + + return -EINVAL; } static int ipoib_stop(struct net_device *dev) -- cgit v1.2.3 From 6782dfe44acedf1e583d84e9e0d4f966d8e9befa Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Wed, 14 Jan 2009 22:32:58 -0700 Subject: fsldma: check for NO_IRQ in fsl_dma_chan_remove() There's no per-channel IRQ on mpc83xx, so only call free_irq if we have one. Acked-by: Timur Tabi Acked-by: Li Yang Signed-off-by: Peter Korsgaard Signed-off-by: Dan Williams --- drivers/dma/fsldma.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index 748e140c5a18..b1b45eb42cb2 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -890,7 +890,8 @@ err_no_reg: static void fsl_dma_chan_remove(struct fsl_dma_chan *fchan) { - free_irq(fchan->irq, fchan); + if (fchan->irq != NO_IRQ) + free_irq(fchan->irq, fchan); list_del(&fchan->common.device_node); iounmap(fchan->reg_base); kfree(fchan); -- cgit v1.2.3 From cbbe1efa4972350286b52cb48aefaa11e198c0fb Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 14 Jan 2009 21:44:39 -0800 Subject: IPoIB: Fix deadlock between ipoib_open() and child interface create Fix a deadlock between child interface creation/deletion and ipoib start/stop. The former takes vlan_mutex, and then might take RTNL via register_netdev()/unregister_netdev(). The latter is executed with RTNL held, and tries to take vlan_mutex, which can lead to an AB-BA deadlock. Fix this by having the child interface creation/deletion code take the RTNL first so vlan_mutex always nests inside RTNL. We can use register_netdevice() for child interfaces because we form the interface name from the parent interface and hence don't need the '%' expansion of register_netdev(). Reported-by: Yossi Etigin Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_vlan.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c index 2cf1a4088718..5a76a5510350 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c @@ -61,6 +61,7 @@ int ipoib_vlan_add(struct net_device *pdev, unsigned short pkey) ppriv = netdev_priv(pdev); + rtnl_lock(); mutex_lock(&ppriv->vlan_mutex); /* @@ -111,7 +112,7 @@ int ipoib_vlan_add(struct net_device *pdev, unsigned short pkey) goto device_init_failed; } - result = register_netdev(priv->dev); + result = register_netdevice(priv->dev); if (result) { ipoib_warn(priv, "failed to initialize; error %i", result); goto register_failed; @@ -134,12 +135,13 @@ int ipoib_vlan_add(struct net_device *pdev, unsigned short pkey) list_add_tail(&priv->list, &ppriv->child_intfs); mutex_unlock(&ppriv->vlan_mutex); + rtnl_unlock(); return 0; sysfs_failed: ipoib_delete_debug_files(priv->dev); - unregister_netdev(priv->dev); + unregister_netdevice(priv->dev); register_failed: ipoib_dev_cleanup(priv->dev); @@ -149,6 +151,7 @@ device_init_failed: err: mutex_unlock(&ppriv->vlan_mutex); + rtnl_unlock(); return result; } @@ -162,10 +165,11 @@ int ipoib_vlan_delete(struct net_device *pdev, unsigned short pkey) ppriv = netdev_priv(pdev); + rtnl_lock(); mutex_lock(&ppriv->vlan_mutex); list_for_each_entry_safe(priv, tpriv, &ppriv->child_intfs, list) { if (priv->pkey == pkey) { - unregister_netdev(priv->dev); + unregister_netdevice(priv->dev); ipoib_dev_cleanup(priv->dev); list_del(&priv->list); free_netdev(priv->dev); @@ -175,6 +179,7 @@ int ipoib_vlan_delete(struct net_device *pdev, unsigned short pkey) } } mutex_unlock(&ppriv->vlan_mutex); + rtnl_unlock(); return ret; } -- cgit v1.2.3 From 73069e388d0f2509e45e1a58b0facca99ef2446e Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Thu, 15 Jan 2009 13:09:52 +0200 Subject: ARM: OMAP: Fix gpio by switching to generic gpio calls, v2 Fix compile by removing remaining omap specific gpio calls. Based on earlier patches by Jarkko Nikula. Also remove old GPIO key code, there is already a patch to do this with gpio_keys. Signed-off-by: Jarkko Nikula Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-sx1.c | 6 ++-- arch/arm/mach-omap2/board-apollon.c | 64 ++++------------------------------ arch/arm/mach-omap2/board-ldp.c | 2 +- arch/arm/plat-omap/include/mach/gpio.h | 10 ------ drivers/mtd/onenand/omap2.c | 6 ++-- 5 files changed, 13 insertions(+), 75 deletions(-) (limited to 'drivers') diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 8171fe0ca082..09a242261a3d 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -423,9 +423,9 @@ static void __init omap_sx1_init(void) /* turn on USB power */ /* sx1_setusbpower(1); cant do it here because i2c is not ready */ - omap_request_gpio(1); /* A_IRDA_OFF */ - omap_request_gpio(11); /* A_SWITCH */ - omap_request_gpio(15); /* A_USB_ON */ + gpio_request(1, "A_IRDA_OFF"); + gpio_request(11, "A_SWITCH"); + gpio_request(15, "A_USB_ON"); gpio_direction_output(1, 1); /*A_IRDA_OFF = 1 */ gpio_direction_output(11, 0); /*A_SWITCH = 0 */ gpio_direction_output(15, 0); /*A_USB_ON = 0 */ diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index bf1e5d32c2a3..0a7b24ba1652 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -22,8 +22,6 @@ #include #include #include -#include -#include #include #include #include @@ -282,65 +280,16 @@ static void __init apollon_led_init(void) { /* LED0 - AA10 */ omap_cfg_reg(AA10_242X_GPIO13); - omap_request_gpio(LED0_GPIO13); - omap_set_gpio_direction(LED0_GPIO13, 0); - omap_set_gpio_dataout(LED0_GPIO13, 0); + gpio_request(LED0_GPIO13, "LED0"); + gpio_direction_output(LED0_GPIO13, 0); /* LED1 - AA6 */ omap_cfg_reg(AA6_242X_GPIO14); - omap_request_gpio(LED1_GPIO14); - omap_set_gpio_direction(LED1_GPIO14, 0); - omap_set_gpio_dataout(LED1_GPIO14, 0); + gpio_request(LED1_GPIO14, "LED1"); + gpio_direction_output(LED1_GPIO14, 0); /* LED2 - AA4 */ omap_cfg_reg(AA4_242X_GPIO15); - omap_request_gpio(LED2_GPIO15); - omap_set_gpio_direction(LED2_GPIO15, 0); - omap_set_gpio_dataout(LED2_GPIO15, 0); -} - -static irqreturn_t apollon_sw_interrupt(int irq, void *ignored) -{ - static unsigned int led0, led1, led2; - - if (irq == OMAP_GPIO_IRQ(SW_ENTER_GPIO16)) - omap_set_gpio_dataout(LED0_GPIO13, led0 ^= 1); - else if (irq == OMAP_GPIO_IRQ(SW_UP_GPIO17)) - omap_set_gpio_dataout(LED1_GPIO14, led1 ^= 1); - else if (irq == OMAP_GPIO_IRQ(SW_DOWN_GPIO58)) - omap_set_gpio_dataout(LED2_GPIO15, led2 ^= 1); - - return IRQ_HANDLED; -} - -static void __init apollon_sw_init(void) -{ - /* Enter SW - Y11 */ - omap_cfg_reg(Y11_242X_GPIO16); - omap_request_gpio(SW_ENTER_GPIO16); - gpio_direction_input(SW_ENTER_GPIO16); - /* Up SW - AA12 */ - omap_cfg_reg(AA12_242X_GPIO17); - omap_request_gpio(SW_UP_GPIO17); - gpio_direction_input(SW_UP_GPIO17); - /* Down SW - AA8 */ - omap_cfg_reg(AA8_242X_GPIO58); - omap_request_gpio(SW_DOWN_GPIO58); - gpio_direction_input(SW_DOWN_GPIO58); - - set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQ_TYPE_EDGE_RISING); - if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt, - IRQF_SHARED, "enter sw", - &apollon_sw_interrupt)) - return; - set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQ_TYPE_EDGE_RISING); - if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt, - IRQF_SHARED, "up sw", - &apollon_sw_interrupt)) - return; - set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQ_TYPE_EDGE_RISING); - if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt, - IRQF_SHARED, "down sw", - &apollon_sw_interrupt)) - return; + gpio_request(LED2_GPIO15, "LED2"); + gpio_direction_output(LED2_GPIO15, 0); } static void __init apollon_usb_init(void) @@ -357,7 +306,6 @@ static void __init omap_apollon_init(void) u32 v; apollon_led_init(); - apollon_sw_init(); apollon_flash_init(); apollon_usb_init(); diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index aa6972781e4a..f6a13451d1fd 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -88,7 +88,7 @@ static inline void __init ldp_init_smc911x(void) ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); - if (omap_request_gpio(eth_gpio) < 0) { + if (gpio_request(eth_gpio, "smc911x irq") < 0) { printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n", eth_gpio); return; diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h index 04e68e88f134..8d9dfe314387 100644 --- a/arch/arm/plat-omap/include/mach/gpio.h +++ b/arch/arm/plat-omap/include/mach/gpio.h @@ -87,16 +87,6 @@ extern void omap_set_gpio_debounce_time(int gpio, int enable); #include #include -static inline int omap_request_gpio(int gpio) -{ - return gpio_request(gpio, "FIXME"); -} - -static inline void omap_free_gpio(int gpio) -{ - gpio_free(gpio); -} - static inline int gpio_get_value(unsigned gpio) { return __gpio_get_value(gpio); diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index 96ecc1766fa8..77a4f1446156 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -629,7 +629,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev) } if (c->gpio_irq) { - if ((r = omap_request_gpio(c->gpio_irq)) < 0) { + if ((r = gpio_request(c->gpio_irq, "OneNAND irq")) < 0) { dev_err(&pdev->dev, "Failed to request GPIO%d for " "OneNAND\n", c->gpio_irq); goto err_iounmap; @@ -726,7 +726,7 @@ err_release_dma: free_irq(gpio_to_irq(c->gpio_irq), c); err_release_gpio: if (c->gpio_irq) - omap_free_gpio(c->gpio_irq); + gpio_free(c->gpio_irq); err_iounmap: iounmap(c->onenand.base); err_release_mem_region: @@ -761,7 +761,7 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); if (c->gpio_irq) { free_irq(gpio_to_irq(c->gpio_irq), c); - omap_free_gpio(c->gpio_irq); + gpio_free(c->gpio_irq); } iounmap(c->onenand.base); release_mem_region(c->phys_base, ONENAND_IO_SIZE); -- cgit v1.2.3 From d3b924d960a808105180d229b4667061123cc4ef Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 15 Jan 2009 20:43:56 -0800 Subject: mlx4_core: Fix min() warning Fix drivers/net/mlx4/profile.c: In function `mlx4_make_profile': drivers/net/mlx4/profile.c:110: warning: comparison of distinct pointer types lacks a cast This happened because num_possible_cpus() was secretly changed by commit ae7a47e7 ("cpumask: make cpumask.h eat its own dogfood.") from returning "int" to (now) returning "unsigned int". I think that was a good change, so we should just swallow the fallout. Cc: "David S. Miller" Cc: Roland Dreier Cc: Yevgeny Petrilin Cc: Jack Morgenstein Cc: Vladimir Sokolovsky Cc: Michael S. Tsirkin Signed-off-by: Andrew Morton Signed-off-by: Roland Dreier --- drivers/net/mlx4/profile.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/mlx4/profile.c b/drivers/net/mlx4/profile.c index 919fb9eb1b62..cebdf3243ca1 100644 --- a/drivers/net/mlx4/profile.c +++ b/drivers/net/mlx4/profile.c @@ -107,9 +107,9 @@ u64 mlx4_make_profile(struct mlx4_dev *dev, profile[MLX4_RES_AUXC].num = request->num_qp; profile[MLX4_RES_SRQ].num = request->num_srq; profile[MLX4_RES_CQ].num = request->num_cq; - profile[MLX4_RES_EQ].num = min(dev_cap->max_eqs, - dev_cap->reserved_eqs + - num_possible_cpus() + 1); + profile[MLX4_RES_EQ].num = min_t(unsigned, dev_cap->max_eqs, + dev_cap->reserved_eqs + + num_possible_cpus() + 1); profile[MLX4_RES_DMPT].num = request->num_mpt; profile[MLX4_RES_CMPT].num = MLX4_NUM_CMPTS; profile[MLX4_RES_MTT].num = request->num_mtt; -- cgit v1.2.3 From 169d5f663759ec494aa74a552ce99486235e6e50 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Wed, 14 Jan 2009 22:33:31 -0700 Subject: fsldma: print correct IRQ on mpc83xx The mpc83xx variant uses a shared IRQ for all channels, so the individual channel nodes don't have an interrupt property. Fix the code to print the controller IRQ instead if there isn't any for the channel. Acked-by: Timur Tabi Acked-by: Li Yang Signed-off-by: Peter Korsgaard Signed-off-by: Dan Williams --- drivers/dma/fsldma.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index b1b45eb42cb2..70126a606239 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -875,7 +875,8 @@ static int __devinit fsl_dma_chan_probe(struct fsl_dma_device *fdev, } dev_info(fdev->dev, "#%d (%s), irq %d\n", new_fsl_chan->id, - compatible, new_fsl_chan->irq); + compatible, + new_fsl_chan->irq != NO_IRQ ? new_fsl_chan->irq : fdev->irq); return 0; -- cgit v1.2.3 From 0db29af1e767464d71b89410d61a1e5b668d0370 Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto Date: Wed, 24 Dec 2008 17:27:04 +0900 Subject: PCI/MSI: bugfix/utilize for msi_capability_init() This patch fix a following bug and does a cleanup. bug: commit 5993760f7fc75b77e4701f1e56dc84c0d6cf18d5 had a wrong change (since is_64 is boolean[0|1]): - pci_write_config_dword(dev, - msi_mask_bits_reg(pos, is_64bit_address(control)), - maskbits); + pci_write_config_dword(dev, entry->msi_attrib.is_64, maskbits); utilize: Unify separated if (entry->msi_attrib.maskbit) statements. Signed-off-by: Hidetoshi Seto Acked-by: "Jike Song" Cc: stable@vger.kernel.org Signed-off-by: Jesse Barnes --- drivers/pci/msi.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index b4a90badd0a6..896a15d70f5b 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -398,21 +398,19 @@ static int msi_capability_init(struct pci_dev *dev) entry->msi_attrib.masked = 1; entry->msi_attrib.default_irq = dev->irq; /* Save IOAPIC IRQ */ entry->msi_attrib.pos = pos; - if (entry->msi_attrib.maskbit) { - entry->mask_base = (void __iomem *)(long)msi_mask_bits_reg(pos, - entry->msi_attrib.is_64); - } entry->dev = dev; if (entry->msi_attrib.maskbit) { - unsigned int maskbits, temp; + unsigned int base, maskbits, temp; + + base = msi_mask_bits_reg(pos, entry->msi_attrib.is_64); + entry->mask_base = (void __iomem *)(long)base; + /* All MSIs are unmasked by default, Mask them all */ - pci_read_config_dword(dev, - msi_mask_bits_reg(pos, entry->msi_attrib.is_64), - &maskbits); + pci_read_config_dword(dev, base, &maskbits); temp = (1 << multi_msi_capable(control)); temp = ((temp - 1) & ~temp); maskbits |= temp; - pci_write_config_dword(dev, entry->msi_attrib.is_64, maskbits); + pci_write_config_dword(dev, base, maskbits); entry->msi_attrib.maskbits_mask = temp; } list_add_tail(&entry->list, &dev->msi_list); -- cgit v1.2.3 From 0fd7e1d8559f45a6838cee93ea49adc0c5bda8f0 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 16 Jan 2009 12:47:47 -0800 Subject: IB/mlx4: Fix memory ordering problem when posting LSO sends The current work request posting code writes the LSO segment before writing any data segments. This leaves a window where the LSO segment overwrites the stamping in one cacheline that the HCA prefetches before the rest of the cacheline is filled with the correct data segments. When the HCA processes this work request, a local protection error may result. Fix this by saving the LSO header size field off and writing it only after all data segments are written. This fix is a cleaned-up version of a patch from Jack Morgenstein . This fixes . Reported-by: Jack Morgenstein Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/qp.c | 28 +++++++++++++++++++--------- 1 file changed, 19 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index 39167a797f99..a91cb4c3fa5c 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -1462,7 +1462,8 @@ static void __set_data_seg(struct mlx4_wqe_data_seg *dseg, struct ib_sge *sg) } static int build_lso_seg(struct mlx4_wqe_lso_seg *wqe, struct ib_send_wr *wr, - struct mlx4_ib_qp *qp, unsigned *lso_seg_len) + struct mlx4_ib_qp *qp, unsigned *lso_seg_len, + __be32 *lso_hdr_sz) { unsigned halign = ALIGN(sizeof *wqe + wr->wr.ud.hlen, 16); @@ -1479,12 +1480,8 @@ static int build_lso_seg(struct mlx4_wqe_lso_seg *wqe, struct ib_send_wr *wr, memcpy(wqe->header, wr->wr.ud.header, wr->wr.ud.hlen); - /* make sure LSO header is written before overwriting stamping */ - wmb(); - - wqe->mss_hdr_size = cpu_to_be32((wr->wr.ud.mss - wr->wr.ud.hlen) << 16 | - wr->wr.ud.hlen); - + *lso_hdr_sz = cpu_to_be32((wr->wr.ud.mss - wr->wr.ud.hlen) << 16 | + wr->wr.ud.hlen); *lso_seg_len = halign; return 0; } @@ -1518,6 +1515,9 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, int uninitialized_var(stamp); int uninitialized_var(size); unsigned uninitialized_var(seglen); + __be32 dummy; + __be32 *lso_wqe; + __be32 uninitialized_var(lso_hdr_sz); int i; spin_lock_irqsave(&qp->sq.lock, flags); @@ -1525,6 +1525,8 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, ind = qp->sq_next_wqe; for (nreq = 0; wr; ++nreq, wr = wr->next) { + lso_wqe = &dummy; + if (mlx4_wq_overflow(&qp->sq, nreq, qp->ibqp.send_cq)) { err = -ENOMEM; *bad_wr = wr; @@ -1606,11 +1608,12 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, size += sizeof (struct mlx4_wqe_datagram_seg) / 16; if (wr->opcode == IB_WR_LSO) { - err = build_lso_seg(wqe, wr, qp, &seglen); + err = build_lso_seg(wqe, wr, qp, &seglen, &lso_hdr_sz); if (unlikely(err)) { *bad_wr = wr; goto out; } + lso_wqe = (__be32 *) wqe; wqe += seglen; size += seglen / 16; } @@ -1652,6 +1655,14 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, for (i = wr->num_sge - 1; i >= 0; --i, --dseg) set_data_seg(dseg, wr->sg_list + i); + /* + * Possibly overwrite stamping in cacheline with LSO + * segment only after making sure all data segments + * are written. + */ + wmb(); + *lso_wqe = lso_hdr_sz; + ctrl->fence_size = (wr->send_flags & IB_SEND_FENCE ? MLX4_WQE_CTRL_FENCE : 0) | size; @@ -1686,7 +1697,6 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, stamp_send_wqe(qp, stamp, size * 16); ind = pad_wraparound(qp, ind); } - } out: -- cgit v1.2.3 From aa8c6c93747f7b55fa11e1624fec8ca33763a805 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 16 Jan 2009 21:54:43 +0100 Subject: PCI PM: Restore standard config registers of all devices early There is a problem in our handling of suspend-resume of PCI devices that many of them have their standard config registers restored with interrupts enabled and they are put into the full power state with interrupts enabled as well. This may lead to the following scenario: * an interrupt vector is shared between two or more devices * one device is resumed earlier and generates an interrupt * the interrupt handler of another device tries to handle it and attempts to access the device the config space of which hasn't been restored yet and/or which still is in a low power state * the system crashes as a result To prevent this from happening we should restore the standard configuration registers of all devices with interrupts disabled and we should put them into the D0 power state right after that. Unfortunately, this cannot be done using the existing pci_set_power_state(), because it can sleep. Also, to do it we have to make sure that the config spaces of all devices were actually saved during suspend. Signed-off-by: Rafael J. Wysocki Acked-by: Linus Torvalds Signed-off-by: Jesse Barnes --- drivers/pci/pci-driver.c | 91 ++++++++++++++---------------------------------- drivers/pci/pci.c | 63 +++++++++++++++++++++++++++++---- drivers/pci/pci.h | 6 ++++ include/linux/pci.h | 5 +++ 4 files changed, 95 insertions(+), 70 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index c697f2680856..9de07b75b993 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -355,17 +355,27 @@ static int pci_legacy_suspend(struct device *dev, pm_message_t state) int i = 0; if (drv && drv->suspend) { + pci_dev->state_saved = false; + i = drv->suspend(pci_dev, state); suspend_report_result(drv->suspend, i); - } else { - pci_save_state(pci_dev); - /* - * This is for compatibility with existing code with legacy PM - * support. - */ - pci_pm_set_unknown_state(pci_dev); + if (i) + return i; + + if (pci_dev->state_saved) + goto Fixup; + + if (WARN_ON_ONCE(pci_dev->current_state != PCI_D0)) + goto Fixup; } + pci_save_state(pci_dev); + /* + * This is for compatibility with existing code with legacy PM support. + */ + pci_pm_set_unknown_state(pci_dev); + + Fixup: pci_fixup_device(pci_fixup_suspend, pci_dev); return i; @@ -386,81 +396,34 @@ static int pci_legacy_suspend_late(struct device *dev, pm_message_t state) static int pci_legacy_resume_early(struct device *dev) { - int error = 0; struct pci_dev * pci_dev = to_pci_dev(dev); struct pci_driver * drv = pci_dev->driver; - pci_fixup_device(pci_fixup_resume_early, pci_dev); - - if (drv && drv->resume_early) - error = drv->resume_early(pci_dev); - return error; + return drv && drv->resume_early ? + drv->resume_early(pci_dev) : 0; } static int pci_legacy_resume(struct device *dev) { - int error; struct pci_dev * pci_dev = to_pci_dev(dev); struct pci_driver * drv = pci_dev->driver; pci_fixup_device(pci_fixup_resume, pci_dev); - if (drv && drv->resume) { - error = drv->resume(pci_dev); - } else { - /* restore the PCI config space */ - pci_restore_state(pci_dev); - error = pci_pm_reenable_device(pci_dev); - } - return error; + return drv && drv->resume ? + drv->resume(pci_dev) : pci_pm_reenable_device(pci_dev); } /* Auxiliary functions used by the new power management framework */ -static int pci_restore_standard_config(struct pci_dev *pci_dev) -{ - struct pci_dev *parent = pci_dev->bus->self; - int error = 0; - - /* Check if the device's bus is operational */ - if (!parent || parent->current_state == PCI_D0) { - pci_restore_state(pci_dev); - pci_update_current_state(pci_dev, PCI_D0); - } else { - dev_warn(&pci_dev->dev, "unable to restore config, " - "bridge %s in low power state D%d\n", pci_name(parent), - parent->current_state); - pci_dev->current_state = PCI_UNKNOWN; - error = -EAGAIN; - } - - return error; -} - -static bool pci_is_bridge(struct pci_dev *pci_dev) -{ - return !!(pci_dev->subordinate); -} - static void pci_pm_default_resume_noirq(struct pci_dev *pci_dev) { - if (pci_restore_standard_config(pci_dev)) - pci_fixup_device(pci_fixup_resume_early, pci_dev); + pci_restore_standard_config(pci_dev); + pci_fixup_device(pci_fixup_resume_early, pci_dev); } static int pci_pm_default_resume(struct pci_dev *pci_dev) { - /* - * pci_restore_standard_config() should have been called once already, - * but it would have failed if the device's parent bridge had not been - * in power state D0 at that time. Check it and try again if necessary. - */ - if (pci_dev->current_state == PCI_UNKNOWN) { - int error = pci_restore_standard_config(pci_dev); - if (error) - return error; - } - pci_fixup_device(pci_fixup_resume, pci_dev); if (!pci_is_bridge(pci_dev)) @@ -575,11 +538,11 @@ static int pci_pm_resume_noirq(struct device *dev) struct device_driver *drv = dev->driver; int error = 0; + pci_pm_default_resume_noirq(pci_dev); + if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_resume_early(dev); - pci_pm_default_resume_noirq(pci_dev); - if (drv && drv->pm && drv->pm->resume_noirq) error = drv->pm->resume_noirq(dev); @@ -730,11 +693,11 @@ static int pci_pm_restore_noirq(struct device *dev) struct device_driver *drv = dev->driver; int error = 0; + pci_pm_default_resume_noirq(pci_dev); + if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_resume_early(dev); - pci_pm_default_resume_noirq(pci_dev); - if (drv && drv->pm && drv->pm->restore_noirq) error = drv->pm->restore_noirq(dev); diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index e491fdedf705..17bd9325a245 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -22,7 +22,7 @@ #include /* isa_dma_bridge_buggy */ #include "pci.h" -unsigned int pci_pm_d3_delay = 10; +unsigned int pci_pm_d3_delay = PCI_PM_D3_WAIT; #ifdef CONFIG_PCI_DOMAINS int pci_domains_supported = 1; @@ -426,6 +426,7 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable) * given PCI device * @dev: PCI device to handle. * @state: PCI power state (D0, D1, D2, D3hot) to put the device into. + * @wait: If 'true', wait for the device to change its power state * * RETURN VALUE: * -EINVAL if the requested state is invalid. @@ -435,7 +436,7 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable) * 0 if device's power state has been successfully changed. */ static int -pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) +pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state, bool wait) { u16 pmcsr; bool need_restore = false; @@ -480,8 +481,10 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) break; case PCI_UNKNOWN: /* Boot-up */ if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot - && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) + && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) { need_restore = true; + wait = true; + } /* Fall-through: force to D0 */ default: pmcsr = 0; @@ -491,12 +494,15 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) /* enter specified state */ pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr); + if (!wait) + return 0; + /* Mandatory power management transition delays */ /* see PCI PM 1.1 5.6.1 table 18 */ if (state == PCI_D3hot || dev->current_state == PCI_D3hot) msleep(pci_pm_d3_delay); else if (state == PCI_D2 || dev->current_state == PCI_D2) - udelay(200); + udelay(PCI_PM_D2_DELAY); dev->current_state = state; @@ -515,7 +521,7 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) if (need_restore) pci_restore_bars(dev); - if (dev->bus->self) + if (wait && dev->bus->self) pcie_aspm_pm_state_change(dev->bus->self); return 0; @@ -585,7 +591,7 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3)) return 0; - error = pci_raw_set_power_state(dev, state); + error = pci_raw_set_power_state(dev, state, true); if (state > PCI_D0 && platform_pci_power_manageable(dev)) { /* Allow the platform to finalize the transition */ @@ -730,6 +736,7 @@ pci_save_state(struct pci_dev *dev) /* XXX: 100% dword access ok here? */ for (i = 0; i < 16; i++) pci_read_config_dword(dev, i * 4,&dev->saved_config_space[i]); + dev->state_saved = true; if ((i = pci_save_pcie_state(dev)) != 0) return i; if ((i = pci_save_pcix_state(dev)) != 0) @@ -1373,6 +1380,50 @@ void pci_allocate_cap_save_buffers(struct pci_dev *dev) "unable to preallocate PCI-X save buffer\n"); } +/** + * pci_restore_standard_config - restore standard config registers of PCI device + * @dev: PCI device to handle + * + * This function assumes that the device's configuration space is accessible. + * If the device needs to be powered up, the function will wait for it to + * change the state. + */ +int pci_restore_standard_config(struct pci_dev *dev) +{ + pci_power_t prev_state; + int error; + + pci_restore_state(dev); + pci_update_current_state(dev, PCI_D0); + + prev_state = dev->current_state; + if (prev_state == PCI_D0) + return 0; + + error = pci_raw_set_power_state(dev, PCI_D0, false); + if (error) + return error; + + if (pci_is_bridge(dev)) { + if (prev_state > PCI_D1) + mdelay(PCI_PM_BUS_WAIT); + } else { + switch(prev_state) { + case PCI_D3cold: + case PCI_D3hot: + mdelay(pci_pm_d3_delay); + break; + case PCI_D2: + udelay(PCI_PM_D2_DELAY); + break; + } + } + + dev->current_state = PCI_D0; + + return 0; +} + /** * pci_enable_ari - enable ARI forwarding if hardware support it * @dev: the PCI device diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 1351bb4addde..26ddf78ac300 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -49,6 +49,12 @@ extern void pci_disable_enabled_device(struct pci_dev *dev); extern void pci_pm_init(struct pci_dev *dev); extern void platform_pci_wakeup_init(struct pci_dev *dev); extern void pci_allocate_cap_save_buffers(struct pci_dev *dev); +extern int pci_restore_standard_config(struct pci_dev *dev); + +static inline bool pci_is_bridge(struct pci_dev *pci_dev) +{ + return !!(pci_dev->subordinate); +} extern int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val); extern int pci_user_read_config_word(struct pci_dev *dev, int where, u16 *val); diff --git a/include/linux/pci.h b/include/linux/pci.h index 80f8b8b65fde..48890cf3f96e 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -117,6 +117,10 @@ typedef int __bitwise pci_power_t; #define PCI_UNKNOWN ((pci_power_t __force) 5) #define PCI_POWER_ERROR ((pci_power_t __force) -1) +#define PCI_PM_D2_DELAY 200 +#define PCI_PM_D3_WAIT 10 +#define PCI_PM_BUS_WAIT 50 + /** The pci_channel state describes connectivity between the CPU and * the pci device. If some PCI bus between here and the pci device * has crashed or locked up, this info is reflected here. @@ -252,6 +256,7 @@ struct pci_dev { unsigned int ari_enabled:1; /* ARI forwarding */ unsigned int is_managed:1; unsigned int is_pcie:1; + unsigned int state_saved:1; pci_dev_flags_t dev_flags; atomic_t enable_cnt; /* pci_enable_device has been called */ -- cgit v1.2.3 From 3c20962086b0ceb5498ba840e5a91bf4a692aae9 Mon Sep 17 00:00:00 2001 From: Yossi Etigin Date: Fri, 16 Jan 2009 13:42:59 -0800 Subject: IPoIB: Do not print error messages for multicast join retries When IPoIB tries to join a multicast group, and the SA module's SM address handle is NULL (because of an SM change, etc), the join returns with -EAGAIN status. In that case, don't print an error message unless multicast debugging is enabled. Signed-off-by: Yossi Etigin Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index 59d02e0b8df1..425e31112ed7 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -409,7 +409,7 @@ static int ipoib_mcast_join_complete(int status, } if (mcast->logcount++ < 20) { - if (status == -ETIMEDOUT) { + if (status == -ETIMEDOUT || status == -EAGAIN) { ipoib_dbg_mcast(priv, "multicast join failed for %pI6, status %d\n", mcast->mcmember.mgid.raw, status); } else { -- cgit v1.2.3 From ef15aa490f2e447ce04fe643500b814ef40f6ea9 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Fri, 9 Jan 2009 21:06:30 +0100 Subject: p54: fix oops caused by bad eeproms This patch fixes a bug that could occur, if it the eeprom is incomplete or partly corrupted. BUG: unable to handle kernel NULL pointer dereference at 00000008 IP: p54_assign_address+0x108/0x15d [p54common] Oops: 0002 [#1] SMP Pid: 12988, comm: phy1 Tainted: P W 2.6.28-rc6-wl #3 RIP: 0010: p54_assign_address+0x108/0x15d [p54common] [...] Call Trace: p54_alloc_skb+0xa3/0xc0 [p54common] p54_scan+0x37/0x204 [p54common] [...] Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index c6a370fa9bcb..3b44e8e76030 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -1610,7 +1610,7 @@ static int p54_scan(struct ieee80211_hw *dev, u16 mode, u16 dwell) err: printk(KERN_ERR "%s: frequency change failed\n", wiphy_name(dev->wiphy)); - kfree_skb(skb); + p54_free_skb(dev, skb); return -EINVAL; } -- cgit v1.2.3 From d71038c05970ad0c9d7da6f797803f69e4f91837 Mon Sep 17 00:00:00 2001 From: Andrey Yurovsky Date: Mon, 12 Jan 2009 13:14:27 -0800 Subject: libertas: Fix alignment issues in libertas core Data structures that come over the wire from the WLAN firmware must be packed. This fixes alignment problems on the blackfin architecture and, reportedly, on the AVR32. This is a replacement for the previous version of this patch which had also explicitly used get_unaligned_ macros. As Johannes Berg pointed out, these macros were unnecessary. Signed-off-by: Andrey Yurovsky Signed-off-by: Colin McCabe Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/hostcmd.h | 91 ++++++++++++++++----------------- 1 file changed, 45 insertions(+), 46 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/libertas/hostcmd.h b/drivers/net/wireless/libertas/hostcmd.h index e173b1b46c23..f6a79a653b7b 100644 --- a/drivers/net/wireless/libertas/hostcmd.h +++ b/drivers/net/wireless/libertas/hostcmd.h @@ -32,7 +32,7 @@ struct txpd { u8 pktdelay_2ms; /* reserved */ u8 reserved1; -}; +} __attribute__ ((packed)); /* RxPD Descriptor */ struct rxpd { @@ -63,7 +63,7 @@ struct rxpd { /* Pkt Priority */ u8 priority; u8 reserved[3]; -}; +} __attribute__ ((packed)); struct cmd_header { __le16 command; @@ -97,7 +97,7 @@ struct enc_key { struct lbs_offset_value { u32 offset; u32 value; -}; +} __attribute__ ((packed)); /* Define general data structure */ /* cmd_DS_GEN */ @@ -107,7 +107,7 @@ struct cmd_ds_gen { __le16 seqnum; __le16 result; void *cmdresp[0]; -}; +} __attribute__ ((packed)); #define S_DS_GEN sizeof(struct cmd_ds_gen) @@ -163,7 +163,7 @@ struct cmd_ds_802_11_subscribe_event { * bump this up a bit. */ uint8_t tlv[128]; -}; +} __attribute__ ((packed)); /* * This scan handle Country Information IE(802.11d compliant) @@ -180,7 +180,7 @@ struct cmd_ds_802_11_scan { mrvlietypes_chanlistparamset_t ChanListParamSet; mrvlietypes_ratesparamset_t OpRateSet; #endif -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_scan_rsp { struct cmd_header hdr; @@ -188,7 +188,7 @@ struct cmd_ds_802_11_scan_rsp { __le16 bssdescriptsize; uint8_t nr_sets; uint8_t bssdesc_and_tlvbuffer[0]; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_get_log { struct cmd_header hdr; @@ -206,33 +206,33 @@ struct cmd_ds_802_11_get_log { __le32 fcserror; __le32 txframe; __le32 wepundecryptable; -}; +} __attribute__ ((packed)); struct cmd_ds_mac_control { struct cmd_header hdr; __le16 action; u16 reserved; -}; +} __attribute__ ((packed)); struct cmd_ds_mac_multicast_adr { struct cmd_header hdr; __le16 action; __le16 nr_of_adrs; u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE]; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_authenticate { u8 macaddr[ETH_ALEN]; u8 authtype; u8 reserved[10]; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_deauthenticate { struct cmd_header hdr; u8 macaddr[ETH_ALEN]; __le16 reasoncode; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_associate { u8 peerstaaddr[6]; @@ -251,7 +251,7 @@ struct cmd_ds_802_11_associate { struct cmd_ds_802_11_associate_rsp { struct ieeetypes_assocrsp assocRsp; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_set_wep { struct cmd_header hdr; @@ -265,7 +265,7 @@ struct cmd_ds_802_11_set_wep { /* 40, 128bit or TXWEP */ uint8_t keytype[4]; uint8_t keymaterial[4][16]; -}; +} __attribute__ ((packed)); struct cmd_ds_802_3_get_stat { __le32 xmitok; @@ -274,7 +274,7 @@ struct cmd_ds_802_3_get_stat { __le32 rcverror; __le32 rcvnobuffer; __le32 rcvcrcerror; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_get_stat { __le32 txfragmentcnt; @@ -294,7 +294,7 @@ struct cmd_ds_802_11_get_stat { __le32 txbeacon; __le32 rxbeacon; __le32 wepundecryptable; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_snmp_mib { struct cmd_header hdr; @@ -303,58 +303,58 @@ struct cmd_ds_802_11_snmp_mib { __le16 oid; __le16 bufsize; u8 value[128]; -}; +} __attribute__ ((packed)); struct cmd_ds_mac_reg_map { __le16 buffersize; u8 regmap[128]; __le16 reserved; -}; +} __attribute__ ((packed)); struct cmd_ds_bbp_reg_map { __le16 buffersize; u8 regmap[128]; __le16 reserved; -}; +} __attribute__ ((packed)); struct cmd_ds_rf_reg_map { __le16 buffersize; u8 regmap[64]; __le16 reserved; -}; +} __attribute__ ((packed)); struct cmd_ds_mac_reg_access { __le16 action; __le16 offset; __le32 value; -}; +} __attribute__ ((packed)); struct cmd_ds_bbp_reg_access { __le16 action; __le16 offset; u8 value; u8 reserved[3]; -}; +} __attribute__ ((packed)); struct cmd_ds_rf_reg_access { __le16 action; __le16 offset; u8 value; u8 reserved[3]; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_radio_control { struct cmd_header hdr; __le16 action; __le16 control; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_beacon_control { __le16 action; __le16 beacon_enable; __le16 beacon_period; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_sleep_params { struct cmd_header hdr; @@ -379,7 +379,7 @@ struct cmd_ds_802_11_sleep_params { /* reserved field, should be set to zero */ __le16 reserved; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_inactivity_timeout { struct cmd_header hdr; @@ -389,7 +389,7 @@ struct cmd_ds_802_11_inactivity_timeout { /* Inactivity timeout in msec */ __le16 timeout; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_rf_channel { struct cmd_header hdr; @@ -399,7 +399,7 @@ struct cmd_ds_802_11_rf_channel { __le16 rftype; /* unused */ __le16 reserved; /* unused */ u8 channellist[32]; /* unused */ -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_rssi { /* weighting factor */ @@ -408,21 +408,21 @@ struct cmd_ds_802_11_rssi { __le16 reserved_0; __le16 reserved_1; __le16 reserved_2; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_rssi_rsp { __le16 SNR; __le16 noisefloor; __le16 avgSNR; __le16 avgnoisefloor; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_mac_address { struct cmd_header hdr; __le16 action; u8 macadd[ETH_ALEN]; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_rf_tx_power { struct cmd_header hdr; @@ -431,7 +431,7 @@ struct cmd_ds_802_11_rf_tx_power { __le16 curlevel; s8 maxlevel; s8 minlevel; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_rf_antenna { __le16 action; @@ -439,33 +439,33 @@ struct cmd_ds_802_11_rf_antenna { /* Number of antennas or 0xffff(diversity) */ __le16 antennamode; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_monitor_mode { __le16 action; __le16 mode; -}; +} __attribute__ ((packed)); struct cmd_ds_set_boot2_ver { struct cmd_header hdr; __le16 action; __le16 version; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_fw_wake_method { struct cmd_header hdr; __le16 action; __le16 method; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_sleep_period { struct cmd_header hdr; __le16 action; __le16 period; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_ps_mode { __le16 action; @@ -473,7 +473,7 @@ struct cmd_ds_802_11_ps_mode { __le16 multipledtim; __le16 reserved; __le16 locallisteninterval; -}; +} __attribute__ ((packed)); struct cmd_confirm_sleep { struct cmd_header hdr; @@ -483,7 +483,7 @@ struct cmd_confirm_sleep { __le16 multipledtim; __le16 reserved; __le16 locallisteninterval; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_data_rate { struct cmd_header hdr; @@ -491,14 +491,14 @@ struct cmd_ds_802_11_data_rate { __le16 action; __le16 reserved; u8 rates[MAX_RATES]; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_rate_adapt_rateset { struct cmd_header hdr; __le16 action; __le16 enablehwauto; __le16 bitmap; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_ad_hoc_start { struct cmd_header hdr; @@ -520,7 +520,7 @@ struct cmd_ds_802_11_ad_hoc_result { u8 pad[3]; u8 bssid[ETH_ALEN]; -}; +} __attribute__ ((packed)); struct adhoc_bssdesc { u8 bssid[ETH_ALEN]; @@ -578,7 +578,7 @@ struct MrvlIEtype_keyParamSet { /* key material of size keylen */ u8 key[32]; -}; +} __attribute__ ((packed)); #define MAX_WOL_RULES 16 @@ -590,7 +590,7 @@ struct host_wol_rule { __le16 reserve; __be32 sig_mask; __be32 signature; -}; +} __attribute__ ((packed)); struct wol_config { uint8_t action; @@ -598,8 +598,7 @@ struct wol_config { uint8_t no_rules_in_cmd; uint8_t result; struct host_wol_rule rule[MAX_WOL_RULES]; -}; - +} __attribute__ ((packed)); struct cmd_ds_host_sleep { struct cmd_header hdr; -- cgit v1.2.3 From b657eade2f98b5c689e405bd6e4e445471066380 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Tue, 13 Jan 2009 14:33:49 +0200 Subject: ath9k: Fix an operator typo in phy rate validation This was not supposed to be a bitwise AND operation, but a check of two separate conditions. Anyway, the old code happened to result in the same behavior, so this is just changing the code to be easier to understand and also to keep sparse from warning about dubious operators. Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/rc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c index 04ab457a8faa..1b71b934bb5e 100644 --- a/drivers/net/wireless/ath9k/rc.c +++ b/drivers/net/wireless/ath9k/rc.c @@ -490,7 +490,7 @@ static inline int ath_rc_get_nextvalid_txrate(struct ath_rate_table *rate_table, static int ath_rc_valid_phyrate(u32 phy, u32 capflag, int ignore_cw) { - if (WLAN_RC_PHY_HT(phy) & !(capflag & WLAN_RC_HT_FLAG)) + if (WLAN_RC_PHY_HT(phy) && !(capflag & WLAN_RC_HT_FLAG)) return 0; if (WLAN_RC_PHY_DS(phy) && !(capflag & WLAN_RC_DS_FLAG)) return 0; -- cgit v1.2.3 From 9d97f2e55e3df44e3b6b4cc58b091501ba7ee0ac Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Tue, 13 Jan 2009 14:35:08 +0200 Subject: ath9k: Fix an operator typo in REG_DOMAIN_2GHZ_MASK Incorrect operator causes the REG_DOMAIN_2GHZ_MASK to be zero which surely was not the goal of this definition. Mask out the 11a flags correctly. Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/regd_common.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath9k/regd_common.h b/drivers/net/wireless/ath9k/regd_common.h index 9112c030b1e8..6df1b3b77c25 100644 --- a/drivers/net/wireless/ath9k/regd_common.h +++ b/drivers/net/wireless/ath9k/regd_common.h @@ -228,7 +228,7 @@ enum { }; #define REG_DOMAIN_2GHZ_MASK (REQ_MASK & \ - (!(ADHOC_NO_11A | DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB))) + (~(ADHOC_NO_11A | DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB))) #define REG_DOMAIN_5GHZ_MASK REQ_MASK static struct reg_dmn_pair_mapping regDomainPairs[] = { -- cgit v1.2.3 From 73e1a65d3c4a013f6fa56e47133be95143a75fe3 Mon Sep 17 00:00:00 2001 From: Zhu Yi Date: Thu, 8 Jan 2009 10:19:58 -0800 Subject: iwlwifi: remove CMD_WANT_SKB flag if send_cmd_sync failure In function iwl_send_cmd_sync(), if the flag CMD_WANT_SKB is set but we are not provided with a valid SKB (cmd->meta.u.skb == NULL), we need to remove the CMD_WANT_SKB flag from the TX cmd queue. Otherwise in case the cmd comes in later, it will possibly set an invalid address. Thus it causes an invalid memory access. This fixed the bug http://bugzilla.kernel.org/show_bug.cgi?id=11326. Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-hcmd.c | 2 +- drivers/net/wireless/iwlwifi/iwl3945-base.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c index 8c71ad4f88c5..4b35b30e493e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c +++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c @@ -224,7 +224,7 @@ int iwl_send_cmd_sync(struct iwl_priv *priv, struct iwl_host_cmd *cmd) IWL_ERROR("Error: Response NULL in '%s'\n", get_cmd_string(cmd->id)); ret = -EIO; - goto out; + goto cancel; } ret = 0; diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index d64580805d6e..15f5655c636e 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -745,7 +745,7 @@ static int iwl3945_send_cmd_sync(struct iwl3945_priv *priv, struct iwl3945_host_ IWL_ERROR("Error: Response NULL in '%s'\n", get_cmd_string(cmd->id)); ret = -EIO; - goto out; + goto cancel; } ret = 0; -- cgit v1.2.3 From e223b6dc051ad030a70d5c6ed6226b95bdfc3af7 Mon Sep 17 00:00:00 2001 From: Rami Rosen Date: Wed, 14 Jan 2009 00:00:13 +0200 Subject: rt2x00: fix a wrong parameter for __test_and_clear_bit() in rt2x00rfkill_free(). When running modprobe rt73usb, and then rmmod rt73usb, and then iwconfig, the wlan0 device does not disappear. When repeating this process again, we get a kernel Oops errors and "BUG: unable to handle kernel paging request..." message in the kernel log. The reason for this is that there is an error in rt2x00rfkill_free(), which is called in the process of removing the device (rt2x00lib_remove_dev() in rt2x00dev.c). rt2x00rfkill_free() clears the RFKILL_STATE_ALLOCATED bit , which is bit number 1 () in rt2x00dev->flags instead of in rt2x00dev->rfkill_state. As a result, when checking the DEVICE_STATE_REGISTERED_HW bit (bit number 1 in rt2x00dev->flags) in rt2x00lib_remove_hw() it is **unset**, and we wrongly **don't** call ieee80211_unregister_hw(). This patch corrects this: the parameter for __test_and_clear_bit() in rt2x00rfkill_free() should be &rt2x00dev->rfkill_state and not &rt2x00dev->flags. Signed-off-by: Rami Rosen Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00rfkill.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rt2x00/rt2x00rfkill.c b/drivers/net/wireless/rt2x00/rt2x00rfkill.c index c3f53a92180a..3298cae1e12d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00rfkill.c +++ b/drivers/net/wireless/rt2x00/rt2x00rfkill.c @@ -162,7 +162,7 @@ void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev) void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev) { - if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->flags)) + if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state)) return; cancel_delayed_work_sync(&rt2x00dev->rfkill_work); -- cgit v1.2.3 From 275719089bfe7dbf446b72c3e520966e7fa42b6a Mon Sep 17 00:00:00 2001 From: Artur Skawina Date: Thu, 15 Jan 2009 21:07:03 +0100 Subject: p54: set_tim must be atomic. Fix for: BUG: scheduling while atomic: named/2004/0x10000200 Pid: 2004, comm: named Not tainted 2.6.29-rc1-00271-ge9fa6b0 #45 Call Trace: [] schedule+0x2a7/0x320 [] __alloc_skb+0x34/0x110 [] __cond_resched+0x13/0x30 [] _cond_resched+0x2d/0x40 [] kmem_cache_alloc+0x95/0xc0 [] check_object+0xc4/0x230 [] __alloc_skb+0x34/0x110 [] p54_alloc_skb+0x71/0xf0 [] p54_set_tim+0x3f/0xa0 [] sta_info_set_tim_bit+0x64/0x80 [] invoke_tx_handlers+0xd57/0xd80 [] free_debug_processing+0x197/0x210 [] pskb_expand_head+0xf5/0x170 [] __ieee80211_tx_prepare+0x164/0x2f0 [] ieee80211_skb_resize+0x6d/0xe0 [] ieee80211_master_start_xmit+0x23f/0x550 [] __slab_alloc+0x2b8/0x4f0 [] getnstimeofday+0x51/0x120 [] dev_hard_start_xmit+0x1db/0x240 [] __qdisc_run+0x1ab/0x200 [] __run_hrtimer+0x31/0xf0 [] dev_queue_xmit+0x247/0x500 [] ieee80211_subif_start_xmit+0x356/0x7d0 [] packet_rcv_spkt+0x37/0x150 [] packet_rcv_spkt+0x37/0x150 [] dev_hard_start_xmit+0x1db/0x240 [] __qdisc_run+0x1ab/0x200 [] dev_queue_xmit+0x247/0x500 [] neigh_resolve_output+0xe2/0x200 [] ip_finish_output+0x0/0x290 [] ip_finish_output+0x1e7/0x290 [] ip_local_out+0x15/0x20 [] ip_push_pending_frames+0x272/0x380 [] udp_push_pending_frames+0x146/0x3a0 [] udp_sendmsg+0x2fa/0x6b0 [] inet_sendmsg+0x37/0x70 [] sock_sendmsg+0xbe/0x100 [] autoremove_wake_function+0x0/0x50 [] __wake_up_common+0x43/0x70 [] copy_from_user+0x32/0x130 [] copy_from_user+0x32/0x130 [] verify_iovec+0x2e/0xb0 [] sys_sendmsg+0x17f/0x290 [] pipe_write+0x29a/0x570 [] update_wall_time+0x492/0x8e0 [] getnstimeofday+0x51/0x120 [] sched_slice+0x3d/0x80 [] getnstimeofday+0x51/0x120 [] hrtimer_forward+0x147/0x1a0 [] lapic_next_event+0x10/0x20 [] clockevents_program_event+0xa3/0x170 [] sys_socketcall+0xa4/0x290 [] smp_apic_timer_interrupt+0x40/0x70 [] sysenter_do_call+0x12/0x25 Signed-off-by: Artur Skawina Acked-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index 3b44e8e76030..ae31e3775e0c 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -1147,7 +1147,7 @@ static int p54_set_tim(struct ieee80211_hw *dev, struct ieee80211_sta *sta, skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET, sizeof(struct p54_hdr) + sizeof(*tim), - P54_CONTROL_TYPE_TIM, GFP_KERNEL); + P54_CONTROL_TYPE_TIM, GFP_ATOMIC); if (!skb) return -ENOMEM; -- cgit v1.2.3 From 674743033c1ae9f7cc94e1e0037f6f719e6d1d67 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Fri, 16 Jan 2009 19:46:28 +0100 Subject: p54: fix p54_set_key's return code p54 doesn't support AES-128-CMAC offload. This patch will fix the noisy mac80211 warnings, when 802.11w is enabled: mac80211-phy189: failed to set key (4, ff:ff:ff:ff:ff:ff) to hardware (-22) mac80211-phy189: failed to set key (5, ff:ff:ff:ff:ff:ff) to hardware (-22) Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index ae31e3775e0c..12d0717c3992 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -2077,7 +2077,7 @@ static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd, algo = P54_CRYPTO_AESCCMP; break; default: - return -EINVAL; + return -EOPNOTSUPP; } } -- cgit v1.2.3 From 3750f60557b68776eb749859ad68af70d1a01ad0 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Fri, 16 Jan 2009 14:55:28 -0800 Subject: IB/ehca: Fix printk format warnings from u64 type change Commit fe333321 ("powerpc: Change u64/s64 to a long long integer type") changed u64 from unsigned long to unsigned long long, which means that printk formats for printing u64 values should use "ll" instead of "l" to avoid warnings. Fix all the places affected by this in ehca. Signed-off-by: Stephen Rothwell Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ehca/ehca_cq.c | 16 ++-- drivers/infiniband/hw/ehca/ehca_hca.c | 2 +- drivers/infiniband/hw/ehca/ehca_irq.c | 18 ++-- drivers/infiniband/hw/ehca/ehca_main.c | 6 +- drivers/infiniband/hw/ehca/ehca_mcast.c | 4 +- drivers/infiniband/hw/ehca/ehca_mrmw.c | 144 +++++++++++++++---------------- drivers/infiniband/hw/ehca/ehca_qp.c | 32 +++---- drivers/infiniband/hw/ehca/ehca_reqs.c | 2 +- drivers/infiniband/hw/ehca/ehca_sqp.c | 2 +- drivers/infiniband/hw/ehca/ehca_tools.h | 2 +- drivers/infiniband/hw/ehca/ehca_uverbs.c | 2 +- drivers/infiniband/hw/ehca/hcp_if.c | 30 +++---- 12 files changed, 130 insertions(+), 130 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/ehca/ehca_cq.c b/drivers/infiniband/hw/ehca/ehca_cq.c index 2f4c28a30271..97e4b231cdc4 100644 --- a/drivers/infiniband/hw/ehca/ehca_cq.c +++ b/drivers/infiniband/hw/ehca/ehca_cq.c @@ -196,7 +196,7 @@ struct ib_cq *ehca_create_cq(struct ib_device *device, int cqe, int comp_vector, if (h_ret != H_SUCCESS) { ehca_err(device, "hipz_h_alloc_resource_cq() failed " - "h_ret=%li device=%p", h_ret, device); + "h_ret=%lli device=%p", h_ret, device); cq = ERR_PTR(ehca2ib_return_code(h_ret)); goto create_cq_exit2; } @@ -232,7 +232,7 @@ struct ib_cq *ehca_create_cq(struct ib_device *device, int cqe, int comp_vector, if (h_ret < H_SUCCESS) { ehca_err(device, "hipz_h_register_rpage_cq() failed " - "ehca_cq=%p cq_num=%x h_ret=%li counter=%i " + "ehca_cq=%p cq_num=%x h_ret=%lli counter=%i " "act_pages=%i", my_cq, my_cq->cq_number, h_ret, counter, param.act_pages); cq = ERR_PTR(-EINVAL); @@ -244,7 +244,7 @@ struct ib_cq *ehca_create_cq(struct ib_device *device, int cqe, int comp_vector, if ((h_ret != H_SUCCESS) || vpage) { ehca_err(device, "Registration of pages not " "complete ehca_cq=%p cq_num=%x " - "h_ret=%li", my_cq, my_cq->cq_number, + "h_ret=%lli", my_cq, my_cq->cq_number, h_ret); cq = ERR_PTR(-EAGAIN); goto create_cq_exit4; @@ -252,7 +252,7 @@ struct ib_cq *ehca_create_cq(struct ib_device *device, int cqe, int comp_vector, } else { if (h_ret != H_PAGE_REGISTERED) { ehca_err(device, "Registration of page failed " - "ehca_cq=%p cq_num=%x h_ret=%li " + "ehca_cq=%p cq_num=%x h_ret=%lli " "counter=%i act_pages=%i", my_cq, my_cq->cq_number, h_ret, counter, param.act_pages); @@ -266,7 +266,7 @@ struct ib_cq *ehca_create_cq(struct ib_device *device, int cqe, int comp_vector, gal = my_cq->galpas.kernel; cqx_fec = hipz_galpa_load(gal, CQTEMM_OFFSET(cqx_fec)); - ehca_dbg(device, "ehca_cq=%p cq_num=%x CQX_FEC=%lx", + ehca_dbg(device, "ehca_cq=%p cq_num=%x CQX_FEC=%llx", my_cq, my_cq->cq_number, cqx_fec); my_cq->ib_cq.cqe = my_cq->nr_of_entries = @@ -307,7 +307,7 @@ create_cq_exit3: h_ret = hipz_h_destroy_cq(adapter_handle, my_cq, 1); if (h_ret != H_SUCCESS) ehca_err(device, "hipz_h_destroy_cq() failed ehca_cq=%p " - "cq_num=%x h_ret=%li", my_cq, my_cq->cq_number, h_ret); + "cq_num=%x h_ret=%lli", my_cq, my_cq->cq_number, h_ret); create_cq_exit2: write_lock_irqsave(&ehca_cq_idr_lock, flags); @@ -355,7 +355,7 @@ int ehca_destroy_cq(struct ib_cq *cq) h_ret = hipz_h_destroy_cq(adapter_handle, my_cq, 0); if (h_ret == H_R_STATE) { /* cq in err: read err data and destroy it forcibly */ - ehca_dbg(device, "ehca_cq=%p cq_num=%x ressource=%lx in err " + ehca_dbg(device, "ehca_cq=%p cq_num=%x resource=%llx in err " "state. Try to delete it forcibly.", my_cq, cq_num, my_cq->ipz_cq_handle.handle); ehca_error_data(shca, my_cq, my_cq->ipz_cq_handle.handle); @@ -365,7 +365,7 @@ int ehca_destroy_cq(struct ib_cq *cq) cq_num); } if (h_ret != H_SUCCESS) { - ehca_err(device, "hipz_h_destroy_cq() failed h_ret=%li " + ehca_err(device, "hipz_h_destroy_cq() failed h_ret=%lli " "ehca_cq=%p cq_num=%x", h_ret, my_cq, cq_num); return ehca2ib_return_code(h_ret); } diff --git a/drivers/infiniband/hw/ehca/ehca_hca.c b/drivers/infiniband/hw/ehca/ehca_hca.c index 46288220cfbb..9209c5332dfe 100644 --- a/drivers/infiniband/hw/ehca/ehca_hca.c +++ b/drivers/infiniband/hw/ehca/ehca_hca.c @@ -393,7 +393,7 @@ int ehca_modify_port(struct ib_device *ibdev, hret = hipz_h_modify_port(shca->ipz_hca_handle, port, cap, props->init_type, port_modify_mask); if (hret != H_SUCCESS) { - ehca_err(&shca->ib_device, "Modify port failed h_ret=%li", + ehca_err(&shca->ib_device, "Modify port failed h_ret=%lli", hret); ret = -EINVAL; } diff --git a/drivers/infiniband/hw/ehca/ehca_irq.c b/drivers/infiniband/hw/ehca/ehca_irq.c index 3128a5090dbd..99bcbd7ffb0a 100644 --- a/drivers/infiniband/hw/ehca/ehca_irq.c +++ b/drivers/infiniband/hw/ehca/ehca_irq.c @@ -99,7 +99,7 @@ static void print_error_data(struct ehca_shca *shca, void *data, return; ehca_err(&shca->ib_device, - "QP 0x%x (resource=%lx) has errors.", + "QP 0x%x (resource=%llx) has errors.", qp->ib_qp.qp_num, resource); break; } @@ -108,21 +108,21 @@ static void print_error_data(struct ehca_shca *shca, void *data, struct ehca_cq *cq = (struct ehca_cq *)data; ehca_err(&shca->ib_device, - "CQ 0x%x (resource=%lx) has errors.", + "CQ 0x%x (resource=%llx) has errors.", cq->cq_number, resource); break; } default: ehca_err(&shca->ib_device, - "Unknown error type: %lx on %s.", + "Unknown error type: %llx on %s.", type, shca->ib_device.name); break; } - ehca_err(&shca->ib_device, "Error data is available: %lx.", resource); + ehca_err(&shca->ib_device, "Error data is available: %llx.", resource); ehca_err(&shca->ib_device, "EHCA ----- error data begin " "---------------------------------------------------"); - ehca_dmp(rblock, length, "resource=%lx", resource); + ehca_dmp(rblock, length, "resource=%llx", resource); ehca_err(&shca->ib_device, "EHCA ----- error data end " "----------------------------------------------------"); @@ -152,7 +152,7 @@ int ehca_error_data(struct ehca_shca *shca, void *data, if (ret == H_R_STATE) ehca_err(&shca->ib_device, - "No error data is available: %lx.", resource); + "No error data is available: %llx.", resource); else if (ret == H_SUCCESS) { int length; @@ -164,7 +164,7 @@ int ehca_error_data(struct ehca_shca *shca, void *data, print_error_data(shca, data, rblock, length); } else ehca_err(&shca->ib_device, - "Error data could not be fetched: %lx", resource); + "Error data could not be fetched: %llx", resource); ehca_free_fw_ctrlblock(rblock); @@ -514,7 +514,7 @@ static inline void process_eqe(struct ehca_shca *shca, struct ehca_eqe *eqe) struct ehca_cq *cq; eqe_value = eqe->entry; - ehca_dbg(&shca->ib_device, "eqe_value=%lx", eqe_value); + ehca_dbg(&shca->ib_device, "eqe_value=%llx", eqe_value); if (EHCA_BMASK_GET(EQE_COMPLETION_EVENT, eqe_value)) { ehca_dbg(&shca->ib_device, "Got completion event"); token = EHCA_BMASK_GET(EQE_CQ_TOKEN, eqe_value); @@ -603,7 +603,7 @@ void ehca_process_eq(struct ehca_shca *shca, int is_irq) ret = hipz_h_eoi(eq->ist); if (ret != H_SUCCESS) ehca_err(&shca->ib_device, - "bad return code EOI -rc = %ld\n", ret); + "bad return code EOI -rc = %lld\n", ret); ehca_dbg(&shca->ib_device, "deadman found %x eqe", eqe_cnt); } if (unlikely(eqe_cnt == EHCA_EQE_CACHE_SIZE)) diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c index c7b8a506af65..368311ce332b 100644 --- a/drivers/infiniband/hw/ehca/ehca_main.c +++ b/drivers/infiniband/hw/ehca/ehca_main.c @@ -304,7 +304,7 @@ static int ehca_sense_attributes(struct ehca_shca *shca) h_ret = hipz_h_query_hca(shca->ipz_hca_handle, rblock); if (h_ret != H_SUCCESS) { - ehca_gen_err("Cannot query device properties. h_ret=%li", + ehca_gen_err("Cannot query device properties. h_ret=%lli", h_ret); ret = -EPERM; goto sense_attributes1; @@ -391,7 +391,7 @@ static int ehca_sense_attributes(struct ehca_shca *shca) port = (struct hipz_query_port *)rblock; h_ret = hipz_h_query_port(shca->ipz_hca_handle, 1, port); if (h_ret != H_SUCCESS) { - ehca_gen_err("Cannot query port properties. h_ret=%li", + ehca_gen_err("Cannot query port properties. h_ret=%lli", h_ret); ret = -EPERM; goto sense_attributes1; @@ -682,7 +682,7 @@ static ssize_t ehca_show_adapter_handle(struct device *dev, { struct ehca_shca *shca = dev->driver_data; - return sprintf(buf, "%lx\n", shca->ipz_hca_handle.handle); + return sprintf(buf, "%llx\n", shca->ipz_hca_handle.handle); } static DEVICE_ATTR(adapter_handle, S_IRUGO, ehca_show_adapter_handle, NULL); diff --git a/drivers/infiniband/hw/ehca/ehca_mcast.c b/drivers/infiniband/hw/ehca/ehca_mcast.c index e3ef0264ccc6..120aedf9f989 100644 --- a/drivers/infiniband/hw/ehca/ehca_mcast.c +++ b/drivers/infiniband/hw/ehca/ehca_mcast.c @@ -88,7 +88,7 @@ int ehca_attach_mcast(struct ib_qp *ibqp, union ib_gid *gid, u16 lid) if (h_ret != H_SUCCESS) ehca_err(ibqp->device, "ehca_qp=%p qp_num=%x hipz_h_attach_mcqp() failed " - "h_ret=%li", my_qp, ibqp->qp_num, h_ret); + "h_ret=%lli", my_qp, ibqp->qp_num, h_ret); return ehca2ib_return_code(h_ret); } @@ -125,7 +125,7 @@ int ehca_detach_mcast(struct ib_qp *ibqp, union ib_gid *gid, u16 lid) if (h_ret != H_SUCCESS) ehca_err(ibqp->device, "ehca_qp=%p qp_num=%x hipz_h_detach_mcqp() failed " - "h_ret=%li", my_qp, ibqp->qp_num, h_ret); + "h_ret=%lli", my_qp, ibqp->qp_num, h_ret); return ehca2ib_return_code(h_ret); } diff --git a/drivers/infiniband/hw/ehca/ehca_mrmw.c b/drivers/infiniband/hw/ehca/ehca_mrmw.c index f974367cad40..72f83f7df614 100644 --- a/drivers/infiniband/hw/ehca/ehca_mrmw.c +++ b/drivers/infiniband/hw/ehca/ehca_mrmw.c @@ -204,7 +204,7 @@ struct ib_mr *ehca_reg_phys_mr(struct ib_pd *pd, } if ((size == 0) || (((u64)iova_start + size) < (u64)iova_start)) { - ehca_err(pd->device, "bad input values: size=%lx iova_start=%p", + ehca_err(pd->device, "bad input values: size=%llx iova_start=%p", size, iova_start); ib_mr = ERR_PTR(-EINVAL); goto reg_phys_mr_exit0; @@ -309,8 +309,8 @@ struct ib_mr *ehca_reg_user_mr(struct ib_pd *pd, u64 start, u64 length, } if (length == 0 || virt + length < virt) { - ehca_err(pd->device, "bad input values: length=%lx " - "virt_base=%lx", length, virt); + ehca_err(pd->device, "bad input values: length=%llx " + "virt_base=%llx", length, virt); ib_mr = ERR_PTR(-EINVAL); goto reg_user_mr_exit0; } @@ -373,7 +373,7 @@ reg_user_mr_fallback: &e_mr->ib.ib_mr.rkey); if (ret == -EINVAL && pginfo.hwpage_size > PAGE_SIZE) { ehca_warn(pd->device, "failed to register mr " - "with hwpage_size=%lx", hwpage_size); + "with hwpage_size=%llx", hwpage_size); ehca_info(pd->device, "try to register mr with " "kpage_size=%lx", PAGE_SIZE); /* @@ -509,7 +509,7 @@ int ehca_rereg_phys_mr(struct ib_mr *mr, goto rereg_phys_mr_exit1; if ((new_size == 0) || (((u64)iova_start + new_size) < (u64)iova_start)) { - ehca_err(mr->device, "bad input values: new_size=%lx " + ehca_err(mr->device, "bad input values: new_size=%llx " "iova_start=%p", new_size, iova_start); ret = -EINVAL; goto rereg_phys_mr_exit1; @@ -580,8 +580,8 @@ int ehca_query_mr(struct ib_mr *mr, struct ib_mr_attr *mr_attr) h_ret = hipz_h_query_mr(shca->ipz_hca_handle, e_mr, &hipzout); if (h_ret != H_SUCCESS) { - ehca_err(mr->device, "hipz_mr_query failed, h_ret=%li mr=%p " - "hca_hndl=%lx mr_hndl=%lx lkey=%x", + ehca_err(mr->device, "hipz_mr_query failed, h_ret=%lli mr=%p " + "hca_hndl=%llx mr_hndl=%llx lkey=%x", h_ret, mr, shca->ipz_hca_handle.handle, e_mr->ipz_mr_handle.handle, mr->lkey); ret = ehca2ib_return_code(h_ret); @@ -630,8 +630,8 @@ int ehca_dereg_mr(struct ib_mr *mr) /* TODO: BUSY: MR still has bound window(s) */ h_ret = hipz_h_free_resource_mr(shca->ipz_hca_handle, e_mr); if (h_ret != H_SUCCESS) { - ehca_err(mr->device, "hipz_free_mr failed, h_ret=%li shca=%p " - "e_mr=%p hca_hndl=%lx mr_hndl=%lx mr->lkey=%x", + ehca_err(mr->device, "hipz_free_mr failed, h_ret=%lli shca=%p " + "e_mr=%p hca_hndl=%llx mr_hndl=%llx mr->lkey=%x", h_ret, shca, e_mr, shca->ipz_hca_handle.handle, e_mr->ipz_mr_handle.handle, mr->lkey); ret = ehca2ib_return_code(h_ret); @@ -671,8 +671,8 @@ struct ib_mw *ehca_alloc_mw(struct ib_pd *pd) h_ret = hipz_h_alloc_resource_mw(shca->ipz_hca_handle, e_mw, e_pd->fw_pd, &hipzout); if (h_ret != H_SUCCESS) { - ehca_err(pd->device, "hipz_mw_allocate failed, h_ret=%li " - "shca=%p hca_hndl=%lx mw=%p", + ehca_err(pd->device, "hipz_mw_allocate failed, h_ret=%lli " + "shca=%p hca_hndl=%llx mw=%p", h_ret, shca, shca->ipz_hca_handle.handle, e_mw); ib_mw = ERR_PTR(ehca2ib_return_code(h_ret)); goto alloc_mw_exit1; @@ -713,8 +713,8 @@ int ehca_dealloc_mw(struct ib_mw *mw) h_ret = hipz_h_free_resource_mw(shca->ipz_hca_handle, e_mw); if (h_ret != H_SUCCESS) { - ehca_err(mw->device, "hipz_free_mw failed, h_ret=%li shca=%p " - "mw=%p rkey=%x hca_hndl=%lx mw_hndl=%lx", + ehca_err(mw->device, "hipz_free_mw failed, h_ret=%lli shca=%p " + "mw=%p rkey=%x hca_hndl=%llx mw_hndl=%llx", h_ret, shca, mw, mw->rkey, shca->ipz_hca_handle.handle, e_mw->ipz_mw_handle.handle); return ehca2ib_return_code(h_ret); @@ -840,7 +840,7 @@ int ehca_map_phys_fmr(struct ib_fmr *fmr, goto map_phys_fmr_exit0; if (iova % e_fmr->fmr_page_size) { /* only whole-numbered pages */ - ehca_err(fmr->device, "bad iova, iova=%lx fmr_page_size=%x", + ehca_err(fmr->device, "bad iova, iova=%llx fmr_page_size=%x", iova, e_fmr->fmr_page_size); ret = -EINVAL; goto map_phys_fmr_exit0; @@ -878,7 +878,7 @@ int ehca_map_phys_fmr(struct ib_fmr *fmr, map_phys_fmr_exit0: if (ret) ehca_err(fmr->device, "ret=%i fmr=%p page_list=%p list_len=%x " - "iova=%lx", ret, fmr, page_list, list_len, iova); + "iova=%llx", ret, fmr, page_list, list_len, iova); return ret; } /* end ehca_map_phys_fmr() */ @@ -964,8 +964,8 @@ int ehca_dealloc_fmr(struct ib_fmr *fmr) h_ret = hipz_h_free_resource_mr(shca->ipz_hca_handle, e_fmr); if (h_ret != H_SUCCESS) { - ehca_err(fmr->device, "hipz_free_mr failed, h_ret=%li e_fmr=%p " - "hca_hndl=%lx fmr_hndl=%lx fmr->lkey=%x", + ehca_err(fmr->device, "hipz_free_mr failed, h_ret=%lli e_fmr=%p " + "hca_hndl=%llx fmr_hndl=%llx fmr->lkey=%x", h_ret, e_fmr, shca->ipz_hca_handle.handle, e_fmr->ipz_mr_handle.handle, fmr->lkey); ret = ehca2ib_return_code(h_ret); @@ -1007,8 +1007,8 @@ int ehca_reg_mr(struct ehca_shca *shca, (u64)iova_start, size, hipz_acl, e_pd->fw_pd, &hipzout); if (h_ret != H_SUCCESS) { - ehca_err(&shca->ib_device, "hipz_alloc_mr failed, h_ret=%li " - "hca_hndl=%lx", h_ret, shca->ipz_hca_handle.handle); + ehca_err(&shca->ib_device, "hipz_alloc_mr failed, h_ret=%lli " + "hca_hndl=%llx", h_ret, shca->ipz_hca_handle.handle); ret = ehca2ib_return_code(h_ret); goto ehca_reg_mr_exit0; } @@ -1033,9 +1033,9 @@ int ehca_reg_mr(struct ehca_shca *shca, ehca_reg_mr_exit1: h_ret = hipz_h_free_resource_mr(shca->ipz_hca_handle, e_mr); if (h_ret != H_SUCCESS) { - ehca_err(&shca->ib_device, "h_ret=%li shca=%p e_mr=%p " - "iova_start=%p size=%lx acl=%x e_pd=%p lkey=%x " - "pginfo=%p num_kpages=%lx num_hwpages=%lx ret=%i", + ehca_err(&shca->ib_device, "h_ret=%lli shca=%p e_mr=%p " + "iova_start=%p size=%llx acl=%x e_pd=%p lkey=%x " + "pginfo=%p num_kpages=%llx num_hwpages=%llx ret=%i", h_ret, shca, e_mr, iova_start, size, acl, e_pd, hipzout.lkey, pginfo, pginfo->num_kpages, pginfo->num_hwpages, ret); @@ -1045,8 +1045,8 @@ ehca_reg_mr_exit1: ehca_reg_mr_exit0: if (ret) ehca_err(&shca->ib_device, "ret=%i shca=%p e_mr=%p " - "iova_start=%p size=%lx acl=%x e_pd=%p pginfo=%p " - "num_kpages=%lx num_hwpages=%lx", + "iova_start=%p size=%llx acl=%x e_pd=%p pginfo=%p " + "num_kpages=%llx num_hwpages=%llx", ret, shca, e_mr, iova_start, size, acl, e_pd, pginfo, pginfo->num_kpages, pginfo->num_hwpages); return ret; @@ -1116,8 +1116,8 @@ int ehca_reg_mr_rpages(struct ehca_shca *shca, */ if (h_ret != H_SUCCESS) { ehca_err(&shca->ib_device, "last " - "hipz_reg_rpage_mr failed, h_ret=%li " - "e_mr=%p i=%x hca_hndl=%lx mr_hndl=%lx" + "hipz_reg_rpage_mr failed, h_ret=%lli " + "e_mr=%p i=%x hca_hndl=%llx mr_hndl=%llx" " lkey=%x", h_ret, e_mr, i, shca->ipz_hca_handle.handle, e_mr->ipz_mr_handle.handle, @@ -1128,8 +1128,8 @@ int ehca_reg_mr_rpages(struct ehca_shca *shca, ret = 0; } else if (h_ret != H_PAGE_REGISTERED) { ehca_err(&shca->ib_device, "hipz_reg_rpage_mr failed, " - "h_ret=%li e_mr=%p i=%x lkey=%x hca_hndl=%lx " - "mr_hndl=%lx", h_ret, e_mr, i, + "h_ret=%lli e_mr=%p i=%x lkey=%x hca_hndl=%llx " + "mr_hndl=%llx", h_ret, e_mr, i, e_mr->ib.ib_mr.lkey, shca->ipz_hca_handle.handle, e_mr->ipz_mr_handle.handle); @@ -1145,7 +1145,7 @@ ehca_reg_mr_rpages_exit1: ehca_reg_mr_rpages_exit0: if (ret) ehca_err(&shca->ib_device, "ret=%i shca=%p e_mr=%p pginfo=%p " - "num_kpages=%lx num_hwpages=%lx", ret, shca, e_mr, + "num_kpages=%llx num_hwpages=%llx", ret, shca, e_mr, pginfo, pginfo->num_kpages, pginfo->num_hwpages); return ret; } /* end ehca_reg_mr_rpages() */ @@ -1184,7 +1184,7 @@ inline int ehca_rereg_mr_rereg1(struct ehca_shca *shca, ret = ehca_set_pagebuf(pginfo, pginfo->num_hwpages, kpage); if (ret) { ehca_err(&shca->ib_device, "set pagebuf failed, e_mr=%p " - "pginfo=%p type=%x num_kpages=%lx num_hwpages=%lx " + "pginfo=%p type=%x num_kpages=%llx num_hwpages=%llx " "kpage=%p", e_mr, pginfo, pginfo->type, pginfo->num_kpages, pginfo->num_hwpages, kpage); goto ehca_rereg_mr_rereg1_exit1; @@ -1205,13 +1205,13 @@ inline int ehca_rereg_mr_rereg1(struct ehca_shca *shca, * (MW bound or MR is shared) */ ehca_warn(&shca->ib_device, "hipz_h_reregister_pmr failed " - "(Rereg1), h_ret=%li e_mr=%p", h_ret, e_mr); + "(Rereg1), h_ret=%lli e_mr=%p", h_ret, e_mr); *pginfo = pginfo_save; ret = -EAGAIN; } else if ((u64 *)hipzout.vaddr != iova_start) { ehca_err(&shca->ib_device, "PHYP changed iova_start in " - "rereg_pmr, iova_start=%p iova_start_out=%lx e_mr=%p " - "mr_handle=%lx lkey=%x lkey_out=%x", iova_start, + "rereg_pmr, iova_start=%p iova_start_out=%llx e_mr=%p " + "mr_handle=%llx lkey=%x lkey_out=%x", iova_start, hipzout.vaddr, e_mr, e_mr->ipz_mr_handle.handle, e_mr->ib.ib_mr.lkey, hipzout.lkey); ret = -EFAULT; @@ -1235,7 +1235,7 @@ ehca_rereg_mr_rereg1_exit1: ehca_rereg_mr_rereg1_exit0: if ( ret && (ret != -EAGAIN) ) ehca_err(&shca->ib_device, "ret=%i lkey=%x rkey=%x " - "pginfo=%p num_kpages=%lx num_hwpages=%lx", + "pginfo=%p num_kpages=%llx num_hwpages=%llx", ret, *lkey, *rkey, pginfo, pginfo->num_kpages, pginfo->num_hwpages); return ret; @@ -1263,7 +1263,7 @@ int ehca_rereg_mr(struct ehca_shca *shca, (e_mr->num_hwpages > MAX_RPAGES) || (pginfo->num_hwpages > e_mr->num_hwpages)) { ehca_dbg(&shca->ib_device, "Rereg3 case, " - "pginfo->num_hwpages=%lx e_mr->num_hwpages=%x", + "pginfo->num_hwpages=%llx e_mr->num_hwpages=%x", pginfo->num_hwpages, e_mr->num_hwpages); rereg_1_hcall = 0; rereg_3_hcall = 1; @@ -1295,7 +1295,7 @@ int ehca_rereg_mr(struct ehca_shca *shca, h_ret = hipz_h_free_resource_mr(shca->ipz_hca_handle, e_mr); if (h_ret != H_SUCCESS) { ehca_err(&shca->ib_device, "hipz_free_mr failed, " - "h_ret=%li e_mr=%p hca_hndl=%lx mr_hndl=%lx " + "h_ret=%lli e_mr=%p hca_hndl=%llx mr_hndl=%llx " "mr->lkey=%x", h_ret, e_mr, shca->ipz_hca_handle.handle, e_mr->ipz_mr_handle.handle, @@ -1328,8 +1328,8 @@ int ehca_rereg_mr(struct ehca_shca *shca, ehca_rereg_mr_exit0: if (ret) ehca_err(&shca->ib_device, "ret=%i shca=%p e_mr=%p " - "iova_start=%p size=%lx acl=%x e_pd=%p pginfo=%p " - "num_kpages=%lx lkey=%x rkey=%x rereg_1_hcall=%x " + "iova_start=%p size=%llx acl=%x e_pd=%p pginfo=%p " + "num_kpages=%llx lkey=%x rkey=%x rereg_1_hcall=%x " "rereg_3_hcall=%x", ret, shca, e_mr, iova_start, size, acl, e_pd, pginfo, pginfo->num_kpages, *lkey, *rkey, rereg_1_hcall, rereg_3_hcall); @@ -1371,8 +1371,8 @@ int ehca_unmap_one_fmr(struct ehca_shca *shca, * FMRs are not shared and no MW bound to FMRs */ ehca_err(&shca->ib_device, "hipz_reregister_pmr failed " - "(Rereg1), h_ret=%li e_fmr=%p hca_hndl=%lx " - "mr_hndl=%lx lkey=%x lkey_out=%x", + "(Rereg1), h_ret=%lli e_fmr=%p hca_hndl=%llx " + "mr_hndl=%llx lkey=%x lkey_out=%x", h_ret, e_fmr, shca->ipz_hca_handle.handle, e_fmr->ipz_mr_handle.handle, e_fmr->ib.ib_fmr.lkey, hipzout.lkey); @@ -1383,7 +1383,7 @@ int ehca_unmap_one_fmr(struct ehca_shca *shca, h_ret = hipz_h_free_resource_mr(shca->ipz_hca_handle, e_fmr); if (h_ret != H_SUCCESS) { ehca_err(&shca->ib_device, "hipz_free_mr failed, " - "h_ret=%li e_fmr=%p hca_hndl=%lx mr_hndl=%lx " + "h_ret=%lli e_fmr=%p hca_hndl=%llx mr_hndl=%llx " "lkey=%x", h_ret, e_fmr, shca->ipz_hca_handle.handle, e_fmr->ipz_mr_handle.handle, @@ -1447,9 +1447,9 @@ int ehca_reg_smr(struct ehca_shca *shca, (u64)iova_start, hipz_acl, e_pd->fw_pd, &hipzout); if (h_ret != H_SUCCESS) { - ehca_err(&shca->ib_device, "hipz_reg_smr failed, h_ret=%li " + ehca_err(&shca->ib_device, "hipz_reg_smr failed, h_ret=%lli " "shca=%p e_origmr=%p e_newmr=%p iova_start=%p acl=%x " - "e_pd=%p hca_hndl=%lx mr_hndl=%lx lkey=%x", + "e_pd=%p hca_hndl=%llx mr_hndl=%llx lkey=%x", h_ret, shca, e_origmr, e_newmr, iova_start, acl, e_pd, shca->ipz_hca_handle.handle, e_origmr->ipz_mr_handle.handle, @@ -1527,7 +1527,7 @@ int ehca_reg_internal_maxmr( &e_mr->ib.ib_mr.rkey); if (ret) { ehca_err(&shca->ib_device, "reg of internal max MR failed, " - "e_mr=%p iova_start=%p size_maxmr=%lx num_kpages=%x " + "e_mr=%p iova_start=%p size_maxmr=%llx num_kpages=%x " "num_hwpages=%x", e_mr, iova_start, size_maxmr, num_kpages, num_hwpages); goto ehca_reg_internal_maxmr_exit1; @@ -1573,8 +1573,8 @@ int ehca_reg_maxmr(struct ehca_shca *shca, (u64)iova_start, hipz_acl, e_pd->fw_pd, &hipzout); if (h_ret != H_SUCCESS) { - ehca_err(&shca->ib_device, "hipz_reg_smr failed, h_ret=%li " - "e_origmr=%p hca_hndl=%lx mr_hndl=%lx lkey=%x", + ehca_err(&shca->ib_device, "hipz_reg_smr failed, h_ret=%lli " + "e_origmr=%p hca_hndl=%llx mr_hndl=%llx lkey=%x", h_ret, e_origmr, shca->ipz_hca_handle.handle, e_origmr->ipz_mr_handle.handle, e_origmr->ib.ib_mr.lkey); @@ -1651,28 +1651,28 @@ int ehca_mr_chk_buf_and_calc_size(struct ib_phys_buf *phys_buf_array, /* check first buffer */ if (((u64)iova_start & ~PAGE_MASK) != (pbuf->addr & ~PAGE_MASK)) { ehca_gen_err("iova_start/addr mismatch, iova_start=%p " - "pbuf->addr=%lx pbuf->size=%lx", + "pbuf->addr=%llx pbuf->size=%llx", iova_start, pbuf->addr, pbuf->size); return -EINVAL; } if (((pbuf->addr + pbuf->size) % PAGE_SIZE) && (num_phys_buf > 1)) { - ehca_gen_err("addr/size mismatch in 1st buf, pbuf->addr=%lx " - "pbuf->size=%lx", pbuf->addr, pbuf->size); + ehca_gen_err("addr/size mismatch in 1st buf, pbuf->addr=%llx " + "pbuf->size=%llx", pbuf->addr, pbuf->size); return -EINVAL; } for (i = 0; i < num_phys_buf; i++) { if ((i > 0) && (pbuf->addr % PAGE_SIZE)) { - ehca_gen_err("bad address, i=%x pbuf->addr=%lx " - "pbuf->size=%lx", + ehca_gen_err("bad address, i=%x pbuf->addr=%llx " + "pbuf->size=%llx", i, pbuf->addr, pbuf->size); return -EINVAL; } if (((i > 0) && /* not 1st */ (i < (num_phys_buf - 1)) && /* not last */ (pbuf->size % PAGE_SIZE)) || (pbuf->size == 0)) { - ehca_gen_err("bad size, i=%x pbuf->size=%lx", + ehca_gen_err("bad size, i=%x pbuf->size=%llx", i, pbuf->size); return -EINVAL; } @@ -1705,7 +1705,7 @@ int ehca_fmr_check_page_list(struct ehca_mr *e_fmr, page = page_list; for (i = 0; i < list_len; i++) { if (*page % e_fmr->fmr_page_size) { - ehca_gen_err("bad page, i=%x *page=%lx page=%p fmr=%p " + ehca_gen_err("bad page, i=%x *page=%llx page=%p fmr=%p " "fmr_page_size=%x", i, *page, page, e_fmr, e_fmr->fmr_page_size); return -EINVAL; @@ -1743,9 +1743,9 @@ static int ehca_set_pagebuf_user1(struct ehca_mr_pginfo *pginfo, (pginfo->next_hwpage * pginfo->hwpage_size)); if ( !(*kpage) ) { - ehca_gen_err("pgaddr=%lx " - "chunk->page_list[i]=%lx " - "i=%x next_hwpage=%lx", + ehca_gen_err("pgaddr=%llx " + "chunk->page_list[i]=%llx " + "i=%x next_hwpage=%llx", pgaddr, (u64)sg_dma_address( &chunk->page_list[i]), i, pginfo->next_hwpage); @@ -1795,11 +1795,11 @@ static int ehca_check_kpages_per_ate(struct scatterlist *page_list, for (t = start_idx; t <= end_idx; t++) { u64 pgaddr = page_to_pfn(sg_page(&page_list[t])) << PAGE_SHIFT; if (ehca_debug_level >= 3) - ehca_gen_dbg("chunk_page=%lx value=%016lx", pgaddr, + ehca_gen_dbg("chunk_page=%llx value=%016llx", pgaddr, *(u64 *)abs_to_virt(phys_to_abs(pgaddr))); if (pgaddr - PAGE_SIZE != *prev_pgaddr) { - ehca_gen_err("uncontiguous page found pgaddr=%lx " - "prev_pgaddr=%lx page_list_i=%x", + ehca_gen_err("uncontiguous page found pgaddr=%llx " + "prev_pgaddr=%llx page_list_i=%x", pgaddr, *prev_pgaddr, t); return -EINVAL; } @@ -1833,7 +1833,7 @@ static int ehca_set_pagebuf_user2(struct ehca_mr_pginfo *pginfo, << PAGE_SHIFT ); *kpage = phys_to_abs(pgaddr); if ( !(*kpage) ) { - ehca_gen_err("pgaddr=%lx i=%x", + ehca_gen_err("pgaddr=%llx i=%x", pgaddr, i); ret = -EFAULT; return ret; @@ -1846,8 +1846,8 @@ static int ehca_set_pagebuf_user2(struct ehca_mr_pginfo *pginfo, if (pginfo->hwpage_cnt) { ehca_gen_err( "invalid alignment " - "pgaddr=%lx i=%x " - "mr_pgsize=%lx", + "pgaddr=%llx i=%x " + "mr_pgsize=%llx", pgaddr, i, pginfo->hwpage_size); ret = -EFAULT; @@ -1866,8 +1866,8 @@ static int ehca_set_pagebuf_user2(struct ehca_mr_pginfo *pginfo, if (ehca_debug_level >= 3) { u64 val = *(u64 *)abs_to_virt( phys_to_abs(pgaddr)); - ehca_gen_dbg("kpage=%lx chunk_page=%lx " - "value=%016lx", + ehca_gen_dbg("kpage=%llx chunk_page=%llx " + "value=%016llx", *kpage, pgaddr, val); } prev_pgaddr = pgaddr; @@ -1944,9 +1944,9 @@ static int ehca_set_pagebuf_phys(struct ehca_mr_pginfo *pginfo, if ((pginfo->kpage_cnt >= pginfo->num_kpages) || (pginfo->hwpage_cnt >= pginfo->num_hwpages)) { ehca_gen_err("kpage_cnt >= num_kpages, " - "kpage_cnt=%lx num_kpages=%lx " - "hwpage_cnt=%lx " - "num_hwpages=%lx i=%x", + "kpage_cnt=%llx num_kpages=%llx " + "hwpage_cnt=%llx " + "num_hwpages=%llx i=%x", pginfo->kpage_cnt, pginfo->num_kpages, pginfo->hwpage_cnt, @@ -1957,8 +1957,8 @@ static int ehca_set_pagebuf_phys(struct ehca_mr_pginfo *pginfo, (pbuf->addr & ~(pginfo->hwpage_size - 1)) + (pginfo->next_hwpage * pginfo->hwpage_size)); if ( !(*kpage) && pbuf->addr ) { - ehca_gen_err("pbuf->addr=%lx pbuf->size=%lx " - "next_hwpage=%lx", pbuf->addr, + ehca_gen_err("pbuf->addr=%llx pbuf->size=%llx " + "next_hwpage=%llx", pbuf->addr, pbuf->size, pginfo->next_hwpage); return -EFAULT; } @@ -1996,8 +1996,8 @@ static int ehca_set_pagebuf_fmr(struct ehca_mr_pginfo *pginfo, *kpage = phys_to_abs((*fmrlist & ~(pginfo->hwpage_size - 1)) + pginfo->next_hwpage * pginfo->hwpage_size); if ( !(*kpage) ) { - ehca_gen_err("*fmrlist=%lx fmrlist=%p " - "next_listelem=%lx next_hwpage=%lx", + ehca_gen_err("*fmrlist=%llx fmrlist=%p " + "next_listelem=%llx next_hwpage=%llx", *fmrlist, fmrlist, pginfo->u.fmr.next_listelem, pginfo->next_hwpage); @@ -2025,7 +2025,7 @@ static int ehca_set_pagebuf_fmr(struct ehca_mr_pginfo *pginfo, ~(pginfo->hwpage_size - 1)); if (prev + pginfo->u.fmr.fmr_pgsize != p) { ehca_gen_err("uncontiguous fmr pages " - "found prev=%lx p=%lx " + "found prev=%llx p=%llx " "idx=%x", prev, p, i + j); return -EINVAL; } diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c index f161cf173dbe..00c108159714 100644 --- a/drivers/infiniband/hw/ehca/ehca_qp.c +++ b/drivers/infiniband/hw/ehca/ehca_qp.c @@ -331,7 +331,7 @@ static inline int init_qp_queue(struct ehca_shca *shca, if (cnt == (nr_q_pages - 1)) { /* last page! */ if (h_ret != expected_hret) { ehca_err(ib_dev, "hipz_qp_register_rpage() " - "h_ret=%li", h_ret); + "h_ret=%lli", h_ret); ret = ehca2ib_return_code(h_ret); goto init_qp_queue1; } @@ -345,7 +345,7 @@ static inline int init_qp_queue(struct ehca_shca *shca, } else { if (h_ret != H_PAGE_REGISTERED) { ehca_err(ib_dev, "hipz_qp_register_rpage() " - "h_ret=%li", h_ret); + "h_ret=%lli", h_ret); ret = ehca2ib_return_code(h_ret); goto init_qp_queue1; } @@ -709,7 +709,7 @@ static struct ehca_qp *internal_create_qp( h_ret = hipz_h_alloc_resource_qp(shca->ipz_hca_handle, &parms); if (h_ret != H_SUCCESS) { - ehca_err(pd->device, "h_alloc_resource_qp() failed h_ret=%li", + ehca_err(pd->device, "h_alloc_resource_qp() failed h_ret=%lli", h_ret); ret = ehca2ib_return_code(h_ret); goto create_qp_exit1; @@ -1010,7 +1010,7 @@ struct ib_srq *ehca_create_srq(struct ib_pd *pd, mqpcb, my_qp->galpas.kernel); if (hret != H_SUCCESS) { ehca_err(pd->device, "Could not modify SRQ to INIT " - "ehca_qp=%p qp_num=%x h_ret=%li", + "ehca_qp=%p qp_num=%x h_ret=%lli", my_qp, my_qp->real_qp_num, hret); goto create_srq2; } @@ -1024,7 +1024,7 @@ struct ib_srq *ehca_create_srq(struct ib_pd *pd, mqpcb, my_qp->galpas.kernel); if (hret != H_SUCCESS) { ehca_err(pd->device, "Could not enable SRQ " - "ehca_qp=%p qp_num=%x h_ret=%li", + "ehca_qp=%p qp_num=%x h_ret=%lli", my_qp, my_qp->real_qp_num, hret); goto create_srq2; } @@ -1038,7 +1038,7 @@ struct ib_srq *ehca_create_srq(struct ib_pd *pd, mqpcb, my_qp->galpas.kernel); if (hret != H_SUCCESS) { ehca_err(pd->device, "Could not modify SRQ to RTR " - "ehca_qp=%p qp_num=%x h_ret=%li", + "ehca_qp=%p qp_num=%x h_ret=%lli", my_qp, my_qp->real_qp_num, hret); goto create_srq2; } @@ -1078,7 +1078,7 @@ static int prepare_sqe_rts(struct ehca_qp *my_qp, struct ehca_shca *shca, &bad_send_wqe_p, NULL, 2); if (h_ret != H_SUCCESS) { ehca_err(&shca->ib_device, "hipz_h_disable_and_get_wqe() failed" - " ehca_qp=%p qp_num=%x h_ret=%li", + " ehca_qp=%p qp_num=%x h_ret=%lli", my_qp, qp_num, h_ret); return ehca2ib_return_code(h_ret); } @@ -1134,7 +1134,7 @@ static int calc_left_cqes(u64 wqe_p, struct ipz_queue *ipz_queue, if (ipz_queue_abs_to_offset(ipz_queue, wqe_p, &q_ofs)) { ehca_gen_err("Invalid offset for calculating left cqes " - "wqe_p=%#lx wqe_v=%p\n", wqe_p, wqe_v); + "wqe_p=%#llx wqe_v=%p\n", wqe_p, wqe_v); return -EFAULT; } @@ -1168,7 +1168,7 @@ static int check_for_left_cqes(struct ehca_qp *my_qp, struct ehca_shca *shca) &send_wqe_p, &recv_wqe_p, 4); if (h_ret != H_SUCCESS) { ehca_err(&shca->ib_device, "disable_and_get_wqe() " - "failed ehca_qp=%p qp_num=%x h_ret=%li", + "failed ehca_qp=%p qp_num=%x h_ret=%lli", my_qp, qp_num, h_ret); return ehca2ib_return_code(h_ret); } @@ -1261,7 +1261,7 @@ static int internal_modify_qp(struct ib_qp *ibqp, mqpcb, my_qp->galpas.kernel); if (h_ret != H_SUCCESS) { ehca_err(ibqp->device, "hipz_h_query_qp() failed " - "ehca_qp=%p qp_num=%x h_ret=%li", + "ehca_qp=%p qp_num=%x h_ret=%lli", my_qp, ibqp->qp_num, h_ret); ret = ehca2ib_return_code(h_ret); goto modify_qp_exit1; @@ -1690,7 +1690,7 @@ static int internal_modify_qp(struct ib_qp *ibqp, if (h_ret != H_SUCCESS) { ret = ehca2ib_return_code(h_ret); - ehca_err(ibqp->device, "hipz_h_modify_qp() failed h_ret=%li " + ehca_err(ibqp->device, "hipz_h_modify_qp() failed h_ret=%lli " "ehca_qp=%p qp_num=%x", h_ret, my_qp, ibqp->qp_num); goto modify_qp_exit2; } @@ -1723,7 +1723,7 @@ static int internal_modify_qp(struct ib_qp *ibqp, ret = ehca2ib_return_code(h_ret); ehca_err(ibqp->device, "ENABLE in context of " "RESET_2_INIT failed! Maybe you didn't get " - "a LID h_ret=%li ehca_qp=%p qp_num=%x", + "a LID h_ret=%lli ehca_qp=%p qp_num=%x", h_ret, my_qp, ibqp->qp_num); goto modify_qp_exit2; } @@ -1909,7 +1909,7 @@ int ehca_query_qp(struct ib_qp *qp, if (h_ret != H_SUCCESS) { ret = ehca2ib_return_code(h_ret); ehca_err(qp->device, "hipz_h_query_qp() failed " - "ehca_qp=%p qp_num=%x h_ret=%li", + "ehca_qp=%p qp_num=%x h_ret=%lli", my_qp, qp->qp_num, h_ret); goto query_qp_exit1; } @@ -2074,7 +2074,7 @@ int ehca_modify_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr, if (h_ret != H_SUCCESS) { ret = ehca2ib_return_code(h_ret); - ehca_err(ibsrq->device, "hipz_h_modify_qp() failed h_ret=%li " + ehca_err(ibsrq->device, "hipz_h_modify_qp() failed h_ret=%lli " "ehca_qp=%p qp_num=%x", h_ret, my_qp, my_qp->real_qp_num); } @@ -2108,7 +2108,7 @@ int ehca_query_srq(struct ib_srq *srq, struct ib_srq_attr *srq_attr) if (h_ret != H_SUCCESS) { ret = ehca2ib_return_code(h_ret); ehca_err(srq->device, "hipz_h_query_qp() failed " - "ehca_qp=%p qp_num=%x h_ret=%li", + "ehca_qp=%p qp_num=%x h_ret=%lli", my_qp, my_qp->real_qp_num, h_ret); goto query_srq_exit1; } @@ -2179,7 +2179,7 @@ static int internal_destroy_qp(struct ib_device *dev, struct ehca_qp *my_qp, h_ret = hipz_h_destroy_qp(shca->ipz_hca_handle, my_qp); if (h_ret != H_SUCCESS) { - ehca_err(dev, "hipz_h_destroy_qp() failed h_ret=%li " + ehca_err(dev, "hipz_h_destroy_qp() failed h_ret=%lli " "ehca_qp=%p qp_num=%x", h_ret, my_qp, qp_num); return ehca2ib_return_code(h_ret); } diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c index c7112686782f..5a3d96f84c79 100644 --- a/drivers/infiniband/hw/ehca/ehca_reqs.c +++ b/drivers/infiniband/hw/ehca/ehca_reqs.c @@ -822,7 +822,7 @@ static int generate_flush_cqes(struct ehca_qp *my_qp, struct ib_cq *cq, offset = qmap->next_wqe_idx * ipz_queue->qe_size; wqe = (struct ehca_wqe *)ipz_qeit_calc(ipz_queue, offset); if (!wqe) { - ehca_err(cq->device, "Invalid wqe offset=%#lx on " + ehca_err(cq->device, "Invalid wqe offset=%#llx on " "qp_num=%#x", offset, my_qp->real_qp_num); return nr; } diff --git a/drivers/infiniband/hw/ehca/ehca_sqp.c b/drivers/infiniband/hw/ehca/ehca_sqp.c index 706d97ad5555..44447aaa5501 100644 --- a/drivers/infiniband/hw/ehca/ehca_sqp.c +++ b/drivers/infiniband/hw/ehca/ehca_sqp.c @@ -85,7 +85,7 @@ u64 ehca_define_sqp(struct ehca_shca *shca, if (ret != H_SUCCESS) { ehca_err(&shca->ib_device, - "Can't define AQP1 for port %x. h_ret=%li", + "Can't define AQP1 for port %x. h_ret=%lli", port, ret); return ret; } diff --git a/drivers/infiniband/hw/ehca/ehca_tools.h b/drivers/infiniband/hw/ehca/ehca_tools.h index 21f7d06f14ad..f09914cccf53 100644 --- a/drivers/infiniband/hw/ehca/ehca_tools.h +++ b/drivers/infiniband/hw/ehca/ehca_tools.h @@ -116,7 +116,7 @@ extern int ehca_debug_level; unsigned char *deb = (unsigned char *)(adr); \ for (x = 0; x < l; x += 16) { \ printk(KERN_INFO "EHCA_DMP:%s " format \ - " adr=%p ofs=%04x %016lx %016lx\n", \ + " adr=%p ofs=%04x %016llx %016llx\n", \ __func__, ##args, deb, x, \ *((u64 *)&deb[0]), *((u64 *)&deb[8])); \ deb += 16; \ diff --git a/drivers/infiniband/hw/ehca/ehca_uverbs.c b/drivers/infiniband/hw/ehca/ehca_uverbs.c index e43ed8f8a0c8..3cb688d29131 100644 --- a/drivers/infiniband/hw/ehca/ehca_uverbs.c +++ b/drivers/infiniband/hw/ehca/ehca_uverbs.c @@ -114,7 +114,7 @@ static int ehca_mmap_fw(struct vm_area_struct *vma, struct h_galpas *galpas, physical = galpas->user.fw_handle; vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); - ehca_gen_dbg("vsize=%lx physical=%lx", vsize, physical); + ehca_gen_dbg("vsize=%llx physical=%llx", vsize, physical); /* VM_IO | VM_RESERVED are set by remap_pfn_range() */ ret = remap_4k_pfn(vma, vma->vm_start, physical >> EHCA_PAGESHIFT, vma->vm_page_prot); diff --git a/drivers/infiniband/hw/ehca/hcp_if.c b/drivers/infiniband/hw/ehca/hcp_if.c index 415d3a465de6..7a13a247c0f0 100644 --- a/drivers/infiniband/hw/ehca/hcp_if.c +++ b/drivers/infiniband/hw/ehca/hcp_if.c @@ -249,7 +249,7 @@ u64 hipz_h_alloc_resource_eq(const struct ipz_adapter_handle adapter_handle, *eq_ist = (u32)outs[5]; if (ret == H_NOT_ENOUGH_RESOURCES) - ehca_gen_err("Not enough resource - ret=%li ", ret); + ehca_gen_err("Not enough resource - ret=%lli ", ret); return ret; } @@ -287,7 +287,7 @@ u64 hipz_h_alloc_resource_cq(const struct ipz_adapter_handle adapter_handle, hcp_galpas_ctor(&cq->galpas, outs[5], outs[6]); if (ret == H_NOT_ENOUGH_RESOURCES) - ehca_gen_err("Not enough resources. ret=%li", ret); + ehca_gen_err("Not enough resources. ret=%lli", ret); return ret; } @@ -362,7 +362,7 @@ u64 hipz_h_alloc_resource_qp(const struct ipz_adapter_handle adapter_handle, hcp_galpas_ctor(&parms->galpas, outs[6], outs[6]); if (ret == H_NOT_ENOUGH_RESOURCES) - ehca_gen_err("Not enough resources. ret=%li", ret); + ehca_gen_err("Not enough resources. ret=%lli", ret); return ret; } @@ -454,7 +454,7 @@ u64 hipz_h_register_rpage_eq(const struct ipz_adapter_handle adapter_handle, const u64 count) { if (count != 1) { - ehca_gen_err("Ppage counter=%lx", count); + ehca_gen_err("Ppage counter=%llx", count); return H_PARAMETER; } return hipz_h_register_rpage(adapter_handle, @@ -489,7 +489,7 @@ u64 hipz_h_register_rpage_cq(const struct ipz_adapter_handle adapter_handle, const struct h_galpa gal) { if (count != 1) { - ehca_gen_err("Page counter=%lx", count); + ehca_gen_err("Page counter=%llx", count); return H_PARAMETER; } @@ -508,7 +508,7 @@ u64 hipz_h_register_rpage_qp(const struct ipz_adapter_handle adapter_handle, const struct h_galpa galpa) { if (count > 1) { - ehca_gen_err("Page counter=%lx", count); + ehca_gen_err("Page counter=%llx", count); return H_PARAMETER; } @@ -557,7 +557,7 @@ u64 hipz_h_modify_qp(const struct ipz_adapter_handle adapter_handle, 0, 0, 0, 0, 0); if (ret == H_NOT_ENOUGH_RESOURCES) - ehca_gen_err("Insufficient resources ret=%li", ret); + ehca_gen_err("Insufficient resources ret=%lli", ret); return ret; } @@ -593,7 +593,7 @@ u64 hipz_h_destroy_qp(const struct ipz_adapter_handle adapter_handle, qp->ipz_qp_handle.handle, /* r6 */ 0, 0, 0, 0, 0, 0); if (ret == H_HARDWARE) - ehca_gen_err("HCA not operational. ret=%li", ret); + ehca_gen_err("HCA not operational. ret=%lli", ret); ret = ehca_plpar_hcall_norets(H_FREE_RESOURCE, adapter_handle.handle, /* r4 */ @@ -601,7 +601,7 @@ u64 hipz_h_destroy_qp(const struct ipz_adapter_handle adapter_handle, 0, 0, 0, 0, 0); if (ret == H_RESOURCE) - ehca_gen_err("Resource still in use. ret=%li", ret); + ehca_gen_err("Resource still in use. ret=%lli", ret); return ret; } @@ -636,7 +636,7 @@ u64 hipz_h_define_aqp1(const struct ipz_adapter_handle adapter_handle, *bma_qp_nr = (u32)outs[1]; if (ret == H_ALIAS_EXIST) - ehca_gen_err("AQP1 already exists. ret=%li", ret); + ehca_gen_err("AQP1 already exists. ret=%lli", ret); return ret; } @@ -658,7 +658,7 @@ u64 hipz_h_attach_mcqp(const struct ipz_adapter_handle adapter_handle, 0, 0); if (ret == H_NOT_ENOUGH_RESOURCES) - ehca_gen_err("Not enough resources. ret=%li", ret); + ehca_gen_err("Not enough resources. ret=%lli", ret); return ret; } @@ -697,7 +697,7 @@ u64 hipz_h_destroy_cq(const struct ipz_adapter_handle adapter_handle, 0, 0, 0, 0); if (ret == H_RESOURCE) - ehca_gen_err("H_FREE_RESOURCE failed ret=%li ", ret); + ehca_gen_err("H_FREE_RESOURCE failed ret=%lli ", ret); return ret; } @@ -719,7 +719,7 @@ u64 hipz_h_destroy_eq(const struct ipz_adapter_handle adapter_handle, 0, 0, 0, 0, 0); if (ret == H_RESOURCE) - ehca_gen_err("Resource in use. ret=%li ", ret); + ehca_gen_err("Resource in use. ret=%lli ", ret); return ret; } @@ -774,9 +774,9 @@ u64 hipz_h_register_rpage_mr(const struct ipz_adapter_handle adapter_handle, if ((count > 1) && (logical_address_of_page & (EHCA_PAGESIZE-1))) { ehca_gen_err("logical_address_of_page not on a 4k boundary " - "adapter_handle=%lx mr=%p mr_handle=%lx " + "adapter_handle=%llx mr=%p mr_handle=%llx " "pagesize=%x queue_type=%x " - "logical_address_of_page=%lx count=%lx", + "logical_address_of_page=%llx count=%llx", adapter_handle.handle, mr, mr->ipz_mr_handle.handle, pagesize, queue_type, logical_address_of_page, count); -- cgit v1.2.3 From ee96aae57381e77311538f4a1dd4326f6ae079d1 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Fri, 16 Jan 2009 14:55:40 -0800 Subject: IB/ehca: Use consistent types for ehca_plpar_hcall9() ehca_plpar_hcall9() takes an unsigned long array, so make all callers pass that in. This fixes warnings introduced by commit fe333321 ("powerpc: Change u64/s64 to a long long integer type"), which changed u64 from unsigned long to unsigned long long. Signed-off-by: Stephen Rothwell Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ehca/hcp_if.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/ehca/hcp_if.c b/drivers/infiniband/hw/ehca/hcp_if.c index 7a13a247c0f0..d0ab0c0d5e91 100644 --- a/drivers/infiniband/hw/ehca/hcp_if.c +++ b/drivers/infiniband/hw/ehca/hcp_if.c @@ -226,7 +226,7 @@ u64 hipz_h_alloc_resource_eq(const struct ipz_adapter_handle adapter_handle, u32 *eq_ist) { u64 ret; - u64 outs[PLPAR_HCALL9_BUFSIZE]; + unsigned long outs[PLPAR_HCALL9_BUFSIZE]; u64 allocate_controls; /* resource type */ @@ -270,7 +270,7 @@ u64 hipz_h_alloc_resource_cq(const struct ipz_adapter_handle adapter_handle, struct ehca_alloc_cq_parms *param) { u64 ret; - u64 outs[PLPAR_HCALL9_BUFSIZE]; + unsigned long outs[PLPAR_HCALL9_BUFSIZE]; ret = ehca_plpar_hcall9(H_ALLOC_RESOURCE, outs, adapter_handle.handle, /* r4 */ @@ -297,7 +297,7 @@ u64 hipz_h_alloc_resource_qp(const struct ipz_adapter_handle adapter_handle, { u64 ret; u64 allocate_controls, max_r10_reg, r11, r12; - u64 outs[PLPAR_HCALL9_BUFSIZE]; + unsigned long outs[PLPAR_HCALL9_BUFSIZE]; allocate_controls = EHCA_BMASK_SET(H_ALL_RES_QP_ENHANCED_OPS, parms->ext_type) @@ -525,7 +525,7 @@ u64 hipz_h_disable_and_get_wqe(const struct ipz_adapter_handle adapter_handle, int dis_and_get_function_code) { u64 ret; - u64 outs[PLPAR_HCALL9_BUFSIZE]; + unsigned long outs[PLPAR_HCALL9_BUFSIZE]; ret = ehca_plpar_hcall9(H_DISABLE_AND_GETC, outs, adapter_handle.handle, /* r4 */ @@ -548,7 +548,7 @@ u64 hipz_h_modify_qp(const struct ipz_adapter_handle adapter_handle, struct h_galpa gal) { u64 ret; - u64 outs[PLPAR_HCALL9_BUFSIZE]; + unsigned long outs[PLPAR_HCALL9_BUFSIZE]; ret = ehca_plpar_hcall9(H_MODIFY_QP, outs, adapter_handle.handle, /* r4 */ qp_handle.handle, /* r5 */ @@ -579,7 +579,7 @@ u64 hipz_h_destroy_qp(const struct ipz_adapter_handle adapter_handle, struct ehca_qp *qp) { u64 ret; - u64 outs[PLPAR_HCALL9_BUFSIZE]; + unsigned long outs[PLPAR_HCALL9_BUFSIZE]; ret = hcp_galpas_dtor(&qp->galpas); if (ret) { @@ -625,7 +625,7 @@ u64 hipz_h_define_aqp1(const struct ipz_adapter_handle adapter_handle, u32 * bma_qp_nr) { u64 ret; - u64 outs[PLPAR_HCALL9_BUFSIZE]; + unsigned long outs[PLPAR_HCALL9_BUFSIZE]; ret = ehca_plpar_hcall9(H_DEFINE_AQP1, outs, adapter_handle.handle, /* r4 */ @@ -733,7 +733,7 @@ u64 hipz_h_alloc_resource_mr(const struct ipz_adapter_handle adapter_handle, struct ehca_mr_hipzout_parms *outparms) { u64 ret; - u64 outs[PLPAR_HCALL9_BUFSIZE]; + unsigned long outs[PLPAR_HCALL9_BUFSIZE]; ret = ehca_plpar_hcall9(H_ALLOC_RESOURCE, outs, adapter_handle.handle, /* r4 */ @@ -794,7 +794,7 @@ u64 hipz_h_query_mr(const struct ipz_adapter_handle adapter_handle, struct ehca_mr_hipzout_parms *outparms) { u64 ret; - u64 outs[PLPAR_HCALL9_BUFSIZE]; + unsigned long outs[PLPAR_HCALL9_BUFSIZE]; ret = ehca_plpar_hcall9(H_QUERY_MR, outs, adapter_handle.handle, /* r4 */ @@ -828,7 +828,7 @@ u64 hipz_h_reregister_pmr(const struct ipz_adapter_handle adapter_handle, struct ehca_mr_hipzout_parms *outparms) { u64 ret; - u64 outs[PLPAR_HCALL9_BUFSIZE]; + unsigned long outs[PLPAR_HCALL9_BUFSIZE]; ret = ehca_plpar_hcall9(H_REREGISTER_PMR, outs, adapter_handle.handle, /* r4 */ @@ -855,7 +855,7 @@ u64 hipz_h_register_smr(const struct ipz_adapter_handle adapter_handle, struct ehca_mr_hipzout_parms *outparms) { u64 ret; - u64 outs[PLPAR_HCALL9_BUFSIZE]; + unsigned long outs[PLPAR_HCALL9_BUFSIZE]; ret = ehca_plpar_hcall9(H_REGISTER_SMR, outs, adapter_handle.handle, /* r4 */ @@ -877,7 +877,7 @@ u64 hipz_h_alloc_resource_mw(const struct ipz_adapter_handle adapter_handle, struct ehca_mw_hipzout_parms *outparms) { u64 ret; - u64 outs[PLPAR_HCALL9_BUFSIZE]; + unsigned long outs[PLPAR_HCALL9_BUFSIZE]; ret = ehca_plpar_hcall9(H_ALLOC_RESOURCE, outs, adapter_handle.handle, /* r4 */ @@ -895,7 +895,7 @@ u64 hipz_h_query_mw(const struct ipz_adapter_handle adapter_handle, struct ehca_mw_hipzout_parms *outparms) { u64 ret; - u64 outs[PLPAR_HCALL9_BUFSIZE]; + unsigned long outs[PLPAR_HCALL9_BUFSIZE]; ret = ehca_plpar_hcall9(H_QUERY_MW, outs, adapter_handle.handle, /* r4 */ -- cgit v1.2.3 From 5dbdf7354821e00e4419ac3520d05d126857d56e Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Mon, 12 Jan 2009 23:25:05 +0100 Subject: move wm8400-regulator's probe function to .devinit.text MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A pointer to wm8400_regulator_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by: Uwe Kleine-König Signed-off-by: Liam Girdwood --- drivers/regulator/wm8400-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/regulator/wm8400-regulator.c b/drivers/regulator/wm8400-regulator.c index 48b372e038a8..56e23d44ba59 100644 --- a/drivers/regulator/wm8400-regulator.c +++ b/drivers/regulator/wm8400-regulator.c @@ -289,7 +289,7 @@ static struct regulator_desc regulators[] = { }, }; -static int __init wm8400_regulator_probe(struct platform_device *pdev) +static int __devinit wm8400_regulator_probe(struct platform_device *pdev) { struct regulator_dev *rdev; -- cgit v1.2.3 From fdb6a8f4db813b4e50f4e975efe6be12ba5bf460 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Sat, 17 Jan 2009 17:13:27 +0100 Subject: oprofile: fix uninitialized use of struct op_entry Impact: fix crash In case of losing samples struct op_entry could have been used uninitialized causing e.g. a wrong preemption count or NULL pointer access. This patch fixes this. Signed-off-by: Robert Richter Signed-off-by: Ingo Molnar --- drivers/oprofile/cpu_buffer.c | 5 +++++ drivers/oprofile/cpu_buffer.h | 7 +++++++ 2 files changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/oprofile/cpu_buffer.c b/drivers/oprofile/cpu_buffer.c index 2e03b6d796d3..e76d715e4342 100644 --- a/drivers/oprofile/cpu_buffer.c +++ b/drivers/oprofile/cpu_buffer.c @@ -393,16 +393,21 @@ oprofile_write_reserve(struct op_entry *entry, struct pt_regs * const regs, return; fail: + entry->event = NULL; cpu_buf->sample_lost_overflow++; } int oprofile_add_data(struct op_entry *entry, unsigned long val) { + if (!entry->event) + return 0; return op_cpu_buffer_add_data(entry, val); } int oprofile_write_commit(struct op_entry *entry) { + if (!entry->event) + return -EINVAL; return op_cpu_buffer_write_commit(entry); } diff --git a/drivers/oprofile/cpu_buffer.h b/drivers/oprofile/cpu_buffer.h index 63f81c44846a..272995d20293 100644 --- a/drivers/oprofile/cpu_buffer.h +++ b/drivers/oprofile/cpu_buffer.h @@ -66,6 +66,13 @@ static inline void op_cpu_buffer_reset(int cpu) cpu_buf->last_task = NULL; } +/* + * op_cpu_buffer_add_data() and op_cpu_buffer_write_commit() may be + * called only if op_cpu_buffer_write_reserve() did not return NULL or + * entry->event != NULL, otherwise entry->size or entry->event will be + * used uninitialized. + */ + struct op_sample *op_cpu_buffer_write_reserve(struct op_entry *entry, unsigned long size); int op_cpu_buffer_write_commit(struct op_entry *entry); -- cgit v1.2.3 From 81156928f8fe31621e467490b9d441c0285998c3 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Sat, 17 Jan 2009 13:33:03 -0500 Subject: dell_rbu: use scnprintf() instead of less secure sprintf() Reading 0 bytes from /sys/devices/platform/dell_rbu/image_type or /sys/devices/platform/dell_rbu/packet_size by an ordinary user causes an oops. Signed-off-by: Pavel Roskin Signed-off-by: Linus Torvalds --- drivers/firmware/dell_rbu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/firmware/dell_rbu.c b/drivers/firmware/dell_rbu.c index 13946ebd77d6..b4704e150b28 100644 --- a/drivers/firmware/dell_rbu.c +++ b/drivers/firmware/dell_rbu.c @@ -576,7 +576,7 @@ static ssize_t read_rbu_image_type(struct kobject *kobj, { int size = 0; if (!pos) - size = sprintf(buffer, "%s\n", image_type); + size = scnprintf(buffer, count, "%s\n", image_type); return size; } @@ -648,7 +648,7 @@ static ssize_t read_rbu_packet_size(struct kobject *kobj, int size = 0; if (!pos) { spin_lock(&rbu_data.lock); - size = sprintf(buffer, "%lu\n", rbu_data.packetsize); + size = scnprintf(buffer, count, "%lu\n", rbu_data.packetsize); spin_unlock(&rbu_data.lock); } return size; -- cgit v1.2.3 From c1ff85d97708550e634fb6fa099c463db90fc40d Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 19 Jan 2009 17:17:58 +1000 Subject: drm: fix leak of device mappings since multi-master changes. Device maps now contain a link to the master that created them, so when cleaning up the master, remove any maps that are connected to it. Also delete any remaining maps at driver unload time. Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_drv.c | 4 ++++ drivers/gpu/drm/drm_stub.c | 8 ++++++++ 2 files changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index 5ff88d952226..14c7a23dc157 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -294,6 +294,7 @@ EXPORT_SYMBOL(drm_init); */ static void drm_cleanup(struct drm_device * dev) { + struct drm_map_list *r_list, *list_temp; DRM_DEBUG("\n"); if (!dev) { @@ -325,6 +326,9 @@ static void drm_cleanup(struct drm_device * dev) drm_ht_remove(&dev->map_hash); drm_ctxbitmap_cleanup(dev); + list_for_each_entry_safe(r_list, list_temp, &dev->maplist, head) + drm_rmmap(dev, r_list->map); + if (drm_core_check_feature(dev, DRIVER_MODESET)) drm_put_minor(&dev->control); diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c index 5ca132afa4f2..46bb923b097c 100644 --- a/drivers/gpu/drm/drm_stub.c +++ b/drivers/gpu/drm/drm_stub.c @@ -118,12 +118,20 @@ static void drm_master_destroy(struct kref *kref) struct drm_master *master = container_of(kref, struct drm_master, refcount); struct drm_magic_entry *pt, *next; struct drm_device *dev = master->minor->dev; + struct drm_map_list *r_list, *list_temp; list_del(&master->head); if (dev->driver->master_destroy) dev->driver->master_destroy(dev, master); + list_for_each_entry_safe(r_list, list_temp, &dev->maplist, head) { + if (r_list->master == master) { + drm_rmmap_locked(dev, r_list->map); + r_list = NULL; + } + } + if (master->unique) { drm_free(master->unique, master->unique_size, DRM_MEM_DRIVER); master->unique = NULL; -- cgit v1.2.3 From bb54affa6fbdd6fe80f193ec1b6977a93078785d Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Mon, 19 Jan 2009 13:46:56 +0100 Subject: ide: fix IDE PMAC breakage Bartlomiej Zolnierkiewicz writes: > Signed-off-by: Bartlomiej Zolnierkiewicz > --- > drivers/ide/ide-probe.c | 9 ++------- > 1 file changed, 2 insertions(+), 7 deletions(-) > > Index: b/drivers/ide/ide-probe.c > =================================================================== > --- a/drivers/ide/ide-probe.c > +++ b/drivers/ide/ide-probe.c > @@ -640,14 +640,9 @@ static int ide_register_port(ide_hwif_t > /* register with global device tree */ > dev_set_name(&hwif->gendev, hwif->name); > hwif->gendev.driver_data = hwif; > - if (hwif->gendev.parent == NULL) { > - if (hwif->dev) > - hwif->gendev.parent = hwif->dev; > - else > - /* Would like to do = &device_legacy */ > - hwif->gendev.parent = NULL; > - } > + hwif->gendev.parent = hwif->dev; This [bart: commit 96d40941236722777c259775640b8880b7dc6f33 ("ide: small ide_register_port() cleanup")] breaks ide-pmac. It overwrites the parent that pmac_ide_macio_attach has set. Signed-off-by: Andreas Schwab Cc: Benjamin Herrenschmidt Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 312127ea443a..0db1ed9f5fc2 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -649,7 +649,8 @@ static int ide_register_port(ide_hwif_t *hwif) /* register with global device tree */ dev_set_name(&hwif->gendev, hwif->name); hwif->gendev.driver_data = hwif; - hwif->gendev.parent = hwif->dev; + if (hwif->gendev.parent == NULL) + hwif->gendev.parent = hwif->dev; hwif->gendev.release = hwif_release_dev; ret = device_register(&hwif->gendev); -- cgit v1.2.3 From abb8817967cc080ee024f7d1a3d5a9830074ca1c Mon Sep 17 00:00:00 2001 From: Michael Schmitz Date: Mon, 19 Jan 2009 13:46:56 +0100 Subject: ide: fix Falcon IDE breakage [m68k] Falcon IDE: always serialize, in order to force execution of ide_get_lock() and friends. Signed-off-By: Michael Schmitz Cc: Geert Uytterhoeven [bart: set flag in falconide_port_info instead of falconide_init()] Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/falconide.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ide/falconide.c b/drivers/ide/falconide.c index a5ba820d69bb..a638e952d67a 100644 --- a/drivers/ide/falconide.c +++ b/drivers/ide/falconide.c @@ -82,7 +82,7 @@ static const struct ide_tp_ops falconide_tp_ops = { static const struct ide_port_info falconide_port_info = { .tp_ops = &falconide_tp_ops, - .host_flags = IDE_HFLAG_NO_DMA, + .host_flags = IDE_HFLAG_NO_DMA | IDE_HFLAG_SERIALIZE, }; static void __init falconide_setup_ports(hw_regs_t *hw) -- cgit v1.2.3 From ef183f6b5982aa10499432a0cb243c92ce623512 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 19 Jan 2009 13:46:57 +0100 Subject: drivers/ide/palm_bk3710.c buildfix CC drivers/ide/palm_bk3710.o drivers/ide/palm_bk3710.c: In function 'palm_bk3710_probe': drivers/ide/palm_bk3710.c:382: warning: assignment makes integer from pointer without a cast Someone should fix hw_regs_t to neither be a typedef, nor use "unsigned long" where it should use "void __iomem *". Signed-off-by: David Brownell Cc: Kevin Hilman Cc: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/palm_bk3710.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c index a7ac490c9ae3..f38aac78044c 100644 --- a/drivers/ide/palm_bk3710.c +++ b/drivers/ide/palm_bk3710.c @@ -346,7 +346,8 @@ static int __init palm_bk3710_probe(struct platform_device *pdev) { struct clk *clk; struct resource *mem, *irq; - unsigned long base, rate; + void __iomem *base; + unsigned long rate; int i, rc; hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; @@ -382,11 +383,13 @@ static int __init palm_bk3710_probe(struct platform_device *pdev) base = IO_ADDRESS(mem->start); /* Configure the Palm Chip controller */ - palm_bk3710_chipinit((void __iomem *)base); + palm_bk3710_chipinit(base); for (i = 0; i < IDE_NR_PORTS - 2; i++) - hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i; - hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET; + hw.io_ports_array[i] = (unsigned long) + (base + IDE_PALM_ATA_PRI_REG_OFFSET + i); + hw.io_ports.ctl_addr = (unsigned long) + (base + IDE_PALM_ATA_PRI_CTL_OFFSET); hw.irq = irq->start; hw.dev = &pdev->dev; hw.chipset = ide_palm3710; -- cgit v1.2.3 From c2fdd36b550659f5ac2240d1f5a83ffa1a092289 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Sat, 17 Jan 2009 16:23:55 +0100 Subject: PCI hotplug: fix lock imbalance in pciehp set_lock_status omits mutex_unlock in fail path. Add the omitted unlock. As a result a lockup caused by this can be triggered from userspace by writing 1 to /sys/bus/pci/slots/.../lock often enough. Signed-off-by: Jiri Slaby Reviewed-by: Kenji Kaneshige Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp_core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index 5482d4ed8256..c2485542f543 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -126,8 +126,10 @@ static int set_lock_status(struct hotplug_slot *hotplug_slot, u8 status) mutex_lock(&slot->ctrl->crit_sect); /* has it been >1 sec since our last toggle? */ - if ((get_seconds() - slot->last_emi_toggle) < 1) + if ((get_seconds() - slot->last_emi_toggle) < 1) { + mutex_unlock(&slot->ctrl->crit_sect); return -EINVAL; + } /* see what our current state is */ retval = get_lock_status(hotplug_slot, &value); -- cgit v1.2.3 From 83436a0560e9ef8af2f0796264dde4bed1415359 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 19 Jan 2009 14:39:10 -0700 Subject: dmaengine: kill some dubious WARN_ONCEs dma_find_channel and dma_issue_pending_all are good places to warn about improper api usage. However, warning correctly means synchronizing with dma_list_mutex, i.e. too much overhead for these fast-path calls. Reported-by: Ingo Molnar Signed-off-by: Dan Williams --- drivers/dma/dmaengine.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index 6df144a65fef..a58993011edb 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -329,9 +329,6 @@ struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type) struct dma_chan *chan; int cpu; - WARN_ONCE(dmaengine_ref_count == 0, - "client called %s without a reference", __func__); - cpu = get_cpu(); chan = per_cpu_ptr(channel_table[tx_type], cpu)->chan; put_cpu(); @@ -348,9 +345,6 @@ void dma_issue_pending_all(void) struct dma_device *device; struct dma_chan *chan; - WARN_ONCE(dmaengine_ref_count == 0, - "client called %s without a reference", __func__); - rcu_read_lock(); list_for_each_entry_rcu(device, &dma_device_list, global_node) { if (dma_has_cap(DMA_PRIVATE, device->cap_mask)) -- cgit v1.2.3 From 5296b56d1b2000b60fb966be161c1f8fb629786b Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 19 Jan 2009 15:36:21 -0700 Subject: i.MX31: Image Processing Unit DMA and IRQ drivers i.MX3x SoCs contain an Image Processing Unit, consisting of a Control Module (CM), Display Interface (DI), Synchronous Display Controller (SDC), Asynchronous Display Controller (ADC), Image Converter (IC), Post-Filter (PF), Camera Sensor Interface (CSI), and an Image DMA Controller (IDMAC). CM contains, among other blocks, an Interrupt Generator (IG) and a Clock and Reset Control Unit (CRCU). This driver serves IDMAC and IG. They are supported over dmaengine and irq-chip APIs respectively. IDMAC is a specialised DMA controller, its DMA channels cannot be used for general-purpose operations, even though it might be possible to configure a memory-to-memory channel for memcpy operation. This driver will not work with generic dmaengine clients, clients, wishing to use it must use respective wrapper structures, they also must specify which channels they require, as channels are hard-wired to specific IPU functions. Acked-by: Sascha Hauer Signed-off-by: Guennadi Liakhovetski Signed-off-by: Dan Williams --- arch/arm/plat-mxc/include/mach/ipu.h | 181 ++++ arch/arm/plat-mxc/include/mach/irqs.h | 10 +- drivers/dma/Kconfig | 19 + drivers/dma/Makefile | 1 + drivers/dma/ipu/Makefile | 1 + drivers/dma/ipu/ipu_idmac.c | 1740 +++++++++++++++++++++++++++++++++ drivers/dma/ipu/ipu_intern.h | 176 ++++ drivers/dma/ipu/ipu_irq.c | 413 ++++++++ 8 files changed, 2540 insertions(+), 1 deletion(-) create mode 100644 arch/arm/plat-mxc/include/mach/ipu.h create mode 100644 drivers/dma/ipu/Makefile create mode 100644 drivers/dma/ipu/ipu_idmac.c create mode 100644 drivers/dma/ipu/ipu_intern.h create mode 100644 drivers/dma/ipu/ipu_irq.c (limited to 'drivers') diff --git a/arch/arm/plat-mxc/include/mach/ipu.h b/arch/arm/plat-mxc/include/mach/ipu.h new file mode 100644 index 000000000000..a9221f1cc1a0 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/ipu.h @@ -0,0 +1,181 @@ +/* + * Copyright (C) 2008 + * Guennadi Liakhovetski, DENX Software Engineering, + * + * Copyright (C) 2005-2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _IPU_H_ +#define _IPU_H_ + +#include +#include + +/* IPU DMA Controller channel definitions. */ +enum ipu_channel { + IDMAC_IC_0 = 0, /* IC (encoding task) to memory */ + IDMAC_IC_1 = 1, /* IC (viewfinder task) to memory */ + IDMAC_ADC_0 = 1, + IDMAC_IC_2 = 2, + IDMAC_ADC_1 = 2, + IDMAC_IC_3 = 3, + IDMAC_IC_4 = 4, + IDMAC_IC_5 = 5, + IDMAC_IC_6 = 6, + IDMAC_IC_7 = 7, /* IC (sensor data) to memory */ + IDMAC_IC_8 = 8, + IDMAC_IC_9 = 9, + IDMAC_IC_10 = 10, + IDMAC_IC_11 = 11, + IDMAC_IC_12 = 12, + IDMAC_IC_13 = 13, + IDMAC_SDC_0 = 14, /* Background synchronous display data */ + IDMAC_SDC_1 = 15, /* Foreground data (overlay) */ + IDMAC_SDC_2 = 16, + IDMAC_SDC_3 = 17, + IDMAC_ADC_2 = 18, + IDMAC_ADC_3 = 19, + IDMAC_ADC_4 = 20, + IDMAC_ADC_5 = 21, + IDMAC_ADC_6 = 22, + IDMAC_ADC_7 = 23, + IDMAC_PF_0 = 24, + IDMAC_PF_1 = 25, + IDMAC_PF_2 = 26, + IDMAC_PF_3 = 27, + IDMAC_PF_4 = 28, + IDMAC_PF_5 = 29, + IDMAC_PF_6 = 30, + IDMAC_PF_7 = 31, +}; + +/* Order significant! */ +enum ipu_channel_status { + IPU_CHANNEL_FREE, + IPU_CHANNEL_INITIALIZED, + IPU_CHANNEL_READY, + IPU_CHANNEL_ENABLED, +}; + +#define IPU_CHANNELS_NUM 32 + +enum pixel_fmt { + /* 1 byte */ + IPU_PIX_FMT_GENERIC, + IPU_PIX_FMT_RGB332, + IPU_PIX_FMT_YUV420P, + IPU_PIX_FMT_YUV422P, + IPU_PIX_FMT_YUV420P2, + IPU_PIX_FMT_YVU422P, + /* 2 bytes */ + IPU_PIX_FMT_RGB565, + IPU_PIX_FMT_RGB666, + IPU_PIX_FMT_BGR666, + IPU_PIX_FMT_YUYV, + IPU_PIX_FMT_UYVY, + /* 3 bytes */ + IPU_PIX_FMT_RGB24, + IPU_PIX_FMT_BGR24, + /* 4 bytes */ + IPU_PIX_FMT_GENERIC_32, + IPU_PIX_FMT_RGB32, + IPU_PIX_FMT_BGR32, + IPU_PIX_FMT_ABGR32, + IPU_PIX_FMT_BGRA32, + IPU_PIX_FMT_RGBA32, +}; + +enum ipu_color_space { + IPU_COLORSPACE_RGB, + IPU_COLORSPACE_YCBCR, + IPU_COLORSPACE_YUV +}; + +/* + * Enumeration of IPU rotation modes + */ +enum ipu_rotate_mode { + /* Note the enum values correspond to BAM value */ + IPU_ROTATE_NONE = 0, + IPU_ROTATE_VERT_FLIP = 1, + IPU_ROTATE_HORIZ_FLIP = 2, + IPU_ROTATE_180 = 3, + IPU_ROTATE_90_RIGHT = 4, + IPU_ROTATE_90_RIGHT_VFLIP = 5, + IPU_ROTATE_90_RIGHT_HFLIP = 6, + IPU_ROTATE_90_LEFT = 7, +}; + +struct ipu_platform_data { + unsigned int irq_base; +}; + +/* + * Enumeration of DI ports for ADC. + */ +enum display_port { + DISP0, + DISP1, + DISP2, + DISP3 +}; + +struct idmac_video_param { + unsigned short in_width; + unsigned short in_height; + uint32_t in_pixel_fmt; + unsigned short out_width; + unsigned short out_height; + uint32_t out_pixel_fmt; + unsigned short out_stride; + bool graphics_combine_en; + bool global_alpha_en; + bool key_color_en; + enum display_port disp; + unsigned short out_left; + unsigned short out_top; +}; + +/* + * Union of initialization parameters for a logical channel. So far only video + * parameters are used. + */ +union ipu_channel_param { + struct idmac_video_param video; +}; + +struct idmac_tx_desc { + struct dma_async_tx_descriptor txd; + struct scatterlist *sg; /* scatterlist for this */ + unsigned int sg_len; /* tx-descriptor. */ + struct list_head list; +}; + +struct idmac_channel { + struct dma_chan dma_chan; + dma_cookie_t completed; /* last completed cookie */ + union ipu_channel_param params; + enum ipu_channel link; /* input channel, linked to the output */ + enum ipu_channel_status status; + void *client; /* Only one client per channel */ + unsigned int n_tx_desc; + struct idmac_tx_desc *desc; /* allocated tx-descriptors */ + struct scatterlist *sg[2]; /* scatterlist elements in buffer-0 and -1 */ + struct list_head free_list; /* free tx-descriptors */ + struct list_head queue; /* queued tx-descriptors */ + spinlock_t lock; /* protects sg[0,1], queue */ + struct mutex chan_mutex; /* protects status, cookie, free_list */ + bool sec_chan_en; + int active_buffer; + unsigned int eof_irq; + char eof_name[16]; /* EOF IRQ name for request_irq() */ +}; + +#define to_tx_desc(tx) container_of(tx, struct idmac_tx_desc, txd) +#define to_idmac_chan(c) container_of(c, struct idmac_channel, dma_chan) + +#endif diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h index e06d3cb0ee11..c02b8fc2d821 100644 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ b/arch/arm/plat-mxc/include/mach/irqs.h @@ -35,7 +35,15 @@ #define MXC_BOARD_IRQ_START (MXC_INTERNAL_IRQS + MXC_GPIO_IRQS) #define MXC_BOARD_IRQS 16 -#define NR_IRQS (MXC_BOARD_IRQ_START + MXC_BOARD_IRQS) +#define MXC_IPU_IRQ_START (MXC_BOARD_IRQ_START + MXC_BOARD_IRQS) + +#ifdef CONFIG_MX3_IPU_IRQS +#define MX3_IPU_IRQS CONFIG_MX3_IPU_IRQS +#else +#define MX3_IPU_IRQS 0 +#endif + +#define NR_IRQS (MXC_IPU_IRQ_START + MX3_IPU_IRQS) extern void imx_irq_set_priority(unsigned char irq, unsigned char prio); diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index e34b06420816..48ea59e79672 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -62,6 +62,25 @@ config MV_XOR ---help--- Enable support for the Marvell XOR engine. +config MX3_IPU + bool "MX3x Image Processing Unit support" + depends on ARCH_MX3 + select DMA_ENGINE + default y + help + If you plan to use the Image Processing unit in the i.MX3x, say + Y here. If unsure, select Y. + +config MX3_IPU_IRQS + int "Number of dynamically mapped interrupts for IPU" + depends on MX3_IPU + range 2 137 + default 4 + help + Out of 137 interrupt sources on i.MX31 IPU only very few are used. + To avoid bloating the irq_desc[] array we allocate a sufficient + number of IRQ slots and map them dynamically to specific sources. + config DMA_ENGINE bool diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index 14f59527d4f6..2e5dc96700d2 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -7,3 +7,4 @@ obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o obj-$(CONFIG_FSL_DMA) += fsldma.o obj-$(CONFIG_MV_XOR) += mv_xor.o obj-$(CONFIG_DW_DMAC) += dw_dmac.o +obj-$(CONFIG_MX3_IPU) += ipu/ diff --git a/drivers/dma/ipu/Makefile b/drivers/dma/ipu/Makefile new file mode 100644 index 000000000000..6704cf48326d --- /dev/null +++ b/drivers/dma/ipu/Makefile @@ -0,0 +1 @@ +obj-y += ipu_irq.o ipu_idmac.o diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c new file mode 100644 index 000000000000..1f154d08e98f --- /dev/null +++ b/drivers/dma/ipu/ipu_idmac.c @@ -0,0 +1,1740 @@ +/* + * Copyright (C) 2008 + * Guennadi Liakhovetski, DENX Software Engineering, + * + * Copyright (C) 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "ipu_intern.h" + +#define FS_VF_IN_VALID 0x00000002 +#define FS_ENC_IN_VALID 0x00000001 + +/* + * There can be only one, we could allocate it dynamically, but then we'd have + * to add an extra parameter to some functions, and use something as ugly as + * struct ipu *ipu = to_ipu(to_idmac(ichan->dma_chan.device)); + * in the ISR + */ +static struct ipu ipu_data; + +#define to_ipu(id) container_of(id, struct ipu, idmac) + +static u32 __idmac_read_icreg(struct ipu *ipu, unsigned long reg) +{ + return __raw_readl(ipu->reg_ic + reg); +} + +#define idmac_read_icreg(ipu, reg) __idmac_read_icreg(ipu, reg - IC_CONF) + +static void __idmac_write_icreg(struct ipu *ipu, u32 value, unsigned long reg) +{ + __raw_writel(value, ipu->reg_ic + reg); +} + +#define idmac_write_icreg(ipu, v, reg) __idmac_write_icreg(ipu, v, reg - IC_CONF) + +static u32 idmac_read_ipureg(struct ipu *ipu, unsigned long reg) +{ + return __raw_readl(ipu->reg_ipu + reg); +} + +static void idmac_write_ipureg(struct ipu *ipu, u32 value, unsigned long reg) +{ + __raw_writel(value, ipu->reg_ipu + reg); +} + +/***************************************************************************** + * IPU / IC common functions + */ +static void dump_idmac_reg(struct ipu *ipu) +{ + dev_dbg(ipu->dev, "IDMAC_CONF 0x%x, IC_CONF 0x%x, IDMAC_CHA_EN 0x%x, " + "IDMAC_CHA_PRI 0x%x, IDMAC_CHA_BUSY 0x%x\n", + idmac_read_icreg(ipu, IDMAC_CONF), + idmac_read_icreg(ipu, IC_CONF), + idmac_read_icreg(ipu, IDMAC_CHA_EN), + idmac_read_icreg(ipu, IDMAC_CHA_PRI), + idmac_read_icreg(ipu, IDMAC_CHA_BUSY)); + dev_dbg(ipu->dev, "BUF0_RDY 0x%x, BUF1_RDY 0x%x, CUR_BUF 0x%x, " + "DB_MODE 0x%x, TASKS_STAT 0x%x\n", + idmac_read_ipureg(ipu, IPU_CHA_BUF0_RDY), + idmac_read_ipureg(ipu, IPU_CHA_BUF1_RDY), + idmac_read_ipureg(ipu, IPU_CHA_CUR_BUF), + idmac_read_ipureg(ipu, IPU_CHA_DB_MODE_SEL), + idmac_read_ipureg(ipu, IPU_TASKS_STAT)); +} + +static uint32_t bytes_per_pixel(enum pixel_fmt fmt) +{ + switch (fmt) { + case IPU_PIX_FMT_GENERIC: /* generic data */ + case IPU_PIX_FMT_RGB332: + case IPU_PIX_FMT_YUV420P: + case IPU_PIX_FMT_YUV422P: + default: + return 1; + case IPU_PIX_FMT_RGB565: + case IPU_PIX_FMT_YUYV: + case IPU_PIX_FMT_UYVY: + return 2; + case IPU_PIX_FMT_BGR24: + case IPU_PIX_FMT_RGB24: + return 3; + case IPU_PIX_FMT_GENERIC_32: /* generic data */ + case IPU_PIX_FMT_BGR32: + case IPU_PIX_FMT_RGB32: + case IPU_PIX_FMT_ABGR32: + return 4; + } +} + +/* Enable / disable direct write to memory by the Camera Sensor Interface */ +static void ipu_ic_enable_task(struct ipu *ipu, enum ipu_channel channel) +{ + uint32_t ic_conf, mask; + + switch (channel) { + case IDMAC_IC_0: + mask = IC_CONF_PRPENC_EN; + break; + case IDMAC_IC_7: + mask = IC_CONF_RWS_EN | IC_CONF_PRPENC_EN; + break; + default: + return; + } + ic_conf = idmac_read_icreg(ipu, IC_CONF) | mask; + idmac_write_icreg(ipu, ic_conf, IC_CONF); +} + +static void ipu_ic_disable_task(struct ipu *ipu, enum ipu_channel channel) +{ + uint32_t ic_conf, mask; + + switch (channel) { + case IDMAC_IC_0: + mask = IC_CONF_PRPENC_EN; + break; + case IDMAC_IC_7: + mask = IC_CONF_RWS_EN | IC_CONF_PRPENC_EN; + break; + default: + return; + } + ic_conf = idmac_read_icreg(ipu, IC_CONF) & ~mask; + idmac_write_icreg(ipu, ic_conf, IC_CONF); +} + +static uint32_t ipu_channel_status(struct ipu *ipu, enum ipu_channel channel) +{ + uint32_t stat = TASK_STAT_IDLE; + uint32_t task_stat_reg = idmac_read_ipureg(ipu, IPU_TASKS_STAT); + + switch (channel) { + case IDMAC_IC_7: + stat = (task_stat_reg & TSTAT_CSI2MEM_MASK) >> + TSTAT_CSI2MEM_OFFSET; + break; + case IDMAC_IC_0: + case IDMAC_SDC_0: + case IDMAC_SDC_1: + default: + break; + } + return stat; +} + +struct chan_param_mem_planar { + /* Word 0 */ + u32 xv:10; + u32 yv:10; + u32 xb:12; + + u32 yb:12; + u32 res1:2; + u32 nsb:1; + u32 lnpb:6; + u32 ubo_l:11; + + u32 ubo_h:15; + u32 vbo_l:17; + + u32 vbo_h:9; + u32 res2:3; + u32 fw:12; + u32 fh_l:8; + + u32 fh_h:4; + u32 res3:28; + + /* Word 1 */ + u32 eba0; + + u32 eba1; + + u32 bpp:3; + u32 sl:14; + u32 pfs:3; + u32 bam:3; + u32 res4:2; + u32 npb:6; + u32 res5:1; + + u32 sat:2; + u32 res6:30; +} __attribute__ ((packed)); + +struct chan_param_mem_interleaved { + /* Word 0 */ + u32 xv:10; + u32 yv:10; + u32 xb:12; + + u32 yb:12; + u32 sce:1; + u32 res1:1; + u32 nsb:1; + u32 lnpb:6; + u32 sx:10; + u32 sy_l:1; + + u32 sy_h:9; + u32 ns:10; + u32 sm:10; + u32 sdx_l:3; + + u32 sdx_h:2; + u32 sdy:5; + u32 sdrx:1; + u32 sdry:1; + u32 sdr1:1; + u32 res2:2; + u32 fw:12; + u32 fh_l:8; + + u32 fh_h:4; + u32 res3:28; + + /* Word 1 */ + u32 eba0; + + u32 eba1; + + u32 bpp:3; + u32 sl:14; + u32 pfs:3; + u32 bam:3; + u32 res4:2; + u32 npb:6; + u32 res5:1; + + u32 sat:2; + u32 scc:1; + u32 ofs0:5; + u32 ofs1:5; + u32 ofs2:5; + u32 ofs3:5; + u32 wid0:3; + u32 wid1:3; + u32 wid2:3; + + u32 wid3:3; + u32 dec_sel:1; + u32 res6:28; +} __attribute__ ((packed)); + +union chan_param_mem { + struct chan_param_mem_planar pp; + struct chan_param_mem_interleaved ip; +}; + +static void ipu_ch_param_set_plane_offset(union chan_param_mem *params, + u32 u_offset, u32 v_offset) +{ + params->pp.ubo_l = u_offset & 0x7ff; + params->pp.ubo_h = u_offset >> 11; + params->pp.vbo_l = v_offset & 0x1ffff; + params->pp.vbo_h = v_offset >> 17; +} + +static void ipu_ch_param_set_size(union chan_param_mem *params, + uint32_t pixel_fmt, uint16_t width, + uint16_t height, uint16_t stride) +{ + u32 u_offset; + u32 v_offset; + + params->pp.fw = width - 1; + params->pp.fh_l = height - 1; + params->pp.fh_h = (height - 1) >> 8; + params->pp.sl = stride - 1; + + switch (pixel_fmt) { + case IPU_PIX_FMT_GENERIC: + /*Represents 8-bit Generic data */ + params->pp.bpp = 3; + params->pp.pfs = 7; + params->pp.npb = 31; + params->pp.sat = 2; /* SAT = use 32-bit access */ + break; + case IPU_PIX_FMT_GENERIC_32: + /*Represents 32-bit Generic data */ + params->pp.bpp = 0; + params->pp.pfs = 7; + params->pp.npb = 7; + params->pp.sat = 2; /* SAT = use 32-bit access */ + break; + case IPU_PIX_FMT_RGB565: + params->ip.bpp = 2; + params->ip.pfs = 4; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + params->ip.ofs0 = 0; /* Red bit offset */ + params->ip.ofs1 = 5; /* Green bit offset */ + params->ip.ofs2 = 11; /* Blue bit offset */ + params->ip.ofs3 = 16; /* Alpha bit offset */ + params->ip.wid0 = 4; /* Red bit width - 1 */ + params->ip.wid1 = 5; /* Green bit width - 1 */ + params->ip.wid2 = 4; /* Blue bit width - 1 */ + break; + case IPU_PIX_FMT_BGR24: + params->ip.bpp = 1; /* 24 BPP & RGB PFS */ + params->ip.pfs = 4; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + params->ip.ofs0 = 0; /* Red bit offset */ + params->ip.ofs1 = 8; /* Green bit offset */ + params->ip.ofs2 = 16; /* Blue bit offset */ + params->ip.ofs3 = 24; /* Alpha bit offset */ + params->ip.wid0 = 7; /* Red bit width - 1 */ + params->ip.wid1 = 7; /* Green bit width - 1 */ + params->ip.wid2 = 7; /* Blue bit width - 1 */ + break; + case IPU_PIX_FMT_RGB24: + params->ip.bpp = 1; /* 24 BPP & RGB PFS */ + params->ip.pfs = 4; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + params->ip.ofs0 = 16; /* Red bit offset */ + params->ip.ofs1 = 8; /* Green bit offset */ + params->ip.ofs2 = 0; /* Blue bit offset */ + params->ip.ofs3 = 24; /* Alpha bit offset */ + params->ip.wid0 = 7; /* Red bit width - 1 */ + params->ip.wid1 = 7; /* Green bit width - 1 */ + params->ip.wid2 = 7; /* Blue bit width - 1 */ + break; + case IPU_PIX_FMT_BGRA32: + case IPU_PIX_FMT_BGR32: + params->ip.bpp = 0; + params->ip.pfs = 4; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + params->ip.ofs0 = 8; /* Red bit offset */ + params->ip.ofs1 = 16; /* Green bit offset */ + params->ip.ofs2 = 24; /* Blue bit offset */ + params->ip.ofs3 = 0; /* Alpha bit offset */ + params->ip.wid0 = 7; /* Red bit width - 1 */ + params->ip.wid1 = 7; /* Green bit width - 1 */ + params->ip.wid2 = 7; /* Blue bit width - 1 */ + params->ip.wid3 = 7; /* Alpha bit width - 1 */ + break; + case IPU_PIX_FMT_RGBA32: + case IPU_PIX_FMT_RGB32: + params->ip.bpp = 0; + params->ip.pfs = 4; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + params->ip.ofs0 = 24; /* Red bit offset */ + params->ip.ofs1 = 16; /* Green bit offset */ + params->ip.ofs2 = 8; /* Blue bit offset */ + params->ip.ofs3 = 0; /* Alpha bit offset */ + params->ip.wid0 = 7; /* Red bit width - 1 */ + params->ip.wid1 = 7; /* Green bit width - 1 */ + params->ip.wid2 = 7; /* Blue bit width - 1 */ + params->ip.wid3 = 7; /* Alpha bit width - 1 */ + break; + case IPU_PIX_FMT_ABGR32: + params->ip.bpp = 0; + params->ip.pfs = 4; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + params->ip.ofs0 = 8; /* Red bit offset */ + params->ip.ofs1 = 16; /* Green bit offset */ + params->ip.ofs2 = 24; /* Blue bit offset */ + params->ip.ofs3 = 0; /* Alpha bit offset */ + params->ip.wid0 = 7; /* Red bit width - 1 */ + params->ip.wid1 = 7; /* Green bit width - 1 */ + params->ip.wid2 = 7; /* Blue bit width - 1 */ + params->ip.wid3 = 7; /* Alpha bit width - 1 */ + break; + case IPU_PIX_FMT_UYVY: + params->ip.bpp = 2; + params->ip.pfs = 6; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + break; + case IPU_PIX_FMT_YUV420P2: + case IPU_PIX_FMT_YUV420P: + params->ip.bpp = 3; + params->ip.pfs = 3; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + u_offset = stride * height; + v_offset = u_offset + u_offset / 4; + ipu_ch_param_set_plane_offset(params, u_offset, v_offset); + break; + case IPU_PIX_FMT_YVU422P: + params->ip.bpp = 3; + params->ip.pfs = 2; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + v_offset = stride * height; + u_offset = v_offset + v_offset / 2; + ipu_ch_param_set_plane_offset(params, u_offset, v_offset); + break; + case IPU_PIX_FMT_YUV422P: + params->ip.bpp = 3; + params->ip.pfs = 2; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + u_offset = stride * height; + v_offset = u_offset + u_offset / 2; + ipu_ch_param_set_plane_offset(params, u_offset, v_offset); + break; + default: + dev_err(ipu_data.dev, + "mxc ipu: unimplemented pixel format %d\n", pixel_fmt); + break; + } + + params->pp.nsb = 1; +} + +static void ipu_ch_param_set_burst_size(union chan_param_mem *params, + uint16_t burst_pixels) +{ + params->pp.npb = burst_pixels - 1; +}; + +static void ipu_ch_param_set_buffer(union chan_param_mem *params, + dma_addr_t buf0, dma_addr_t buf1) +{ + params->pp.eba0 = buf0; + params->pp.eba1 = buf1; +}; + +static void ipu_ch_param_set_rotation(union chan_param_mem *params, + enum ipu_rotate_mode rotate) +{ + params->pp.bam = rotate; +}; + +static void ipu_write_param_mem(uint32_t addr, uint32_t *data, + uint32_t num_words) +{ + for (; num_words > 0; num_words--) { + dev_dbg(ipu_data.dev, + "write param mem - addr = 0x%08X, data = 0x%08X\n", + addr, *data); + idmac_write_ipureg(&ipu_data, addr, IPU_IMA_ADDR); + idmac_write_ipureg(&ipu_data, *data++, IPU_IMA_DATA); + addr++; + if ((addr & 0x7) == 5) { + addr &= ~0x7; /* set to word 0 */ + addr += 8; /* increment to next row */ + } + } +} + +static int calc_resize_coeffs(uint32_t in_size, uint32_t out_size, + uint32_t *resize_coeff, + uint32_t *downsize_coeff) +{ + uint32_t temp_size; + uint32_t temp_downsize; + + *resize_coeff = 1 << 13; + *downsize_coeff = 1 << 13; + + /* Cannot downsize more than 8:1 */ + if (out_size << 3 < in_size) + return -EINVAL; + + /* compute downsizing coefficient */ + temp_downsize = 0; + temp_size = in_size; + while (temp_size >= out_size * 2 && temp_downsize < 2) { + temp_size >>= 1; + temp_downsize++; + } + *downsize_coeff = temp_downsize; + + /* + * compute resizing coefficient using the following formula: + * resize_coeff = M*(SI -1)/(SO - 1) + * where M = 2^13, SI - input size, SO - output size + */ + *resize_coeff = (8192L * (temp_size - 1)) / (out_size - 1); + if (*resize_coeff >= 16384L) { + dev_err(ipu_data.dev, "Warning! Overflow on resize coeff.\n"); + *resize_coeff = 0x3FFF; + } + + dev_dbg(ipu_data.dev, "resizing from %u -> %u pixels, " + "downsize=%u, resize=%u.%lu (reg=%u)\n", in_size, out_size, + *downsize_coeff, *resize_coeff >= 8192L ? 1 : 0, + ((*resize_coeff & 0x1FFF) * 10000L) / 8192L, *resize_coeff); + + return 0; +} + +static enum ipu_color_space format_to_colorspace(enum pixel_fmt fmt) +{ + switch (fmt) { + case IPU_PIX_FMT_RGB565: + case IPU_PIX_FMT_BGR24: + case IPU_PIX_FMT_RGB24: + case IPU_PIX_FMT_BGR32: + case IPU_PIX_FMT_RGB32: + return IPU_COLORSPACE_RGB; + default: + return IPU_COLORSPACE_YCBCR; + } +} + +static int ipu_ic_init_prpenc(struct ipu *ipu, + union ipu_channel_param *params, bool src_is_csi) +{ + uint32_t reg, ic_conf; + uint32_t downsize_coeff, resize_coeff; + enum ipu_color_space in_fmt, out_fmt; + + /* Setup vertical resizing */ + calc_resize_coeffs(params->video.in_height, + params->video.out_height, + &resize_coeff, &downsize_coeff); + reg = (downsize_coeff << 30) | (resize_coeff << 16); + + /* Setup horizontal resizing */ + calc_resize_coeffs(params->video.in_width, + params->video.out_width, + &resize_coeff, &downsize_coeff); + reg |= (downsize_coeff << 14) | resize_coeff; + + /* Setup color space conversion */ + in_fmt = format_to_colorspace(params->video.in_pixel_fmt); + out_fmt = format_to_colorspace(params->video.out_pixel_fmt); + + /* + * Colourspace conversion unsupported yet - see _init_csc() in + * Freescale sources + */ + if (in_fmt != out_fmt) { + dev_err(ipu->dev, "Colourspace conversion unsupported!\n"); + return -EOPNOTSUPP; + } + + idmac_write_icreg(ipu, reg, IC_PRP_ENC_RSC); + + ic_conf = idmac_read_icreg(ipu, IC_CONF); + + if (src_is_csi) + ic_conf &= ~IC_CONF_RWS_EN; + else + ic_conf |= IC_CONF_RWS_EN; + + idmac_write_icreg(ipu, ic_conf, IC_CONF); + + return 0; +} + +static uint32_t dma_param_addr(uint32_t dma_ch) +{ + /* Channel Parameter Memory */ + return 0x10000 | (dma_ch << 4); +}; + +static void ipu_channel_set_priority(struct ipu *ipu, enum ipu_channel channel, + bool prio) +{ + u32 reg = idmac_read_icreg(ipu, IDMAC_CHA_PRI); + + if (prio) + reg |= 1UL << channel; + else + reg &= ~(1UL << channel); + + idmac_write_icreg(ipu, reg, IDMAC_CHA_PRI); + + dump_idmac_reg(ipu); +} + +static uint32_t ipu_channel_conf_mask(enum ipu_channel channel) +{ + uint32_t mask; + + switch (channel) { + case IDMAC_IC_0: + case IDMAC_IC_7: + mask = IPU_CONF_CSI_EN | IPU_CONF_IC_EN; + break; + case IDMAC_SDC_0: + case IDMAC_SDC_1: + mask = IPU_CONF_SDC_EN | IPU_CONF_DI_EN; + break; + default: + mask = 0; + break; + } + + return mask; +} + +/** + * ipu_enable_channel() - enable an IPU channel. + * @channel: channel ID. + * @return: 0 on success or negative error code on failure. + */ +static int ipu_enable_channel(struct idmac *idmac, struct idmac_channel *ichan) +{ + struct ipu *ipu = to_ipu(idmac); + enum ipu_channel channel = ichan->dma_chan.chan_id; + uint32_t reg; + unsigned long flags; + + spin_lock_irqsave(&ipu->lock, flags); + + /* Reset to buffer 0 */ + idmac_write_ipureg(ipu, 1UL << channel, IPU_CHA_CUR_BUF); + ichan->active_buffer = 0; + ichan->status = IPU_CHANNEL_ENABLED; + + switch (channel) { + case IDMAC_SDC_0: + case IDMAC_SDC_1: + case IDMAC_IC_7: + ipu_channel_set_priority(ipu, channel, true); + default: + break; + } + + reg = idmac_read_icreg(ipu, IDMAC_CHA_EN); + + idmac_write_icreg(ipu, reg | (1UL << channel), IDMAC_CHA_EN); + + ipu_ic_enable_task(ipu, channel); + + spin_unlock_irqrestore(&ipu->lock, flags); + return 0; +} + +/** + * ipu_init_channel_buffer() - initialize a buffer for logical IPU channel. + * @channel: channel ID. + * @pixel_fmt: pixel format of buffer. Pixel format is a FOURCC ASCII code. + * @width: width of buffer in pixels. + * @height: height of buffer in pixels. + * @stride: stride length of buffer in pixels. + * @rot_mode: rotation mode of buffer. A rotation setting other than + * IPU_ROTATE_VERT_FLIP should only be used for input buffers of + * rotation channels. + * @phyaddr_0: buffer 0 physical address. + * @phyaddr_1: buffer 1 physical address. Setting this to a value other than + * NULL enables double buffering mode. + * @return: 0 on success or negative error code on failure. + */ +static int ipu_init_channel_buffer(struct idmac_channel *ichan, + enum pixel_fmt pixel_fmt, + uint16_t width, uint16_t height, + uint32_t stride, + enum ipu_rotate_mode rot_mode, + dma_addr_t phyaddr_0, dma_addr_t phyaddr_1) +{ + enum ipu_channel channel = ichan->dma_chan.chan_id; + struct idmac *idmac = to_idmac(ichan->dma_chan.device); + struct ipu *ipu = to_ipu(idmac); + union chan_param_mem params = {}; + unsigned long flags; + uint32_t reg; + uint32_t stride_bytes; + + stride_bytes = stride * bytes_per_pixel(pixel_fmt); + + if (stride_bytes % 4) { + dev_err(ipu->dev, + "Stride length must be 32-bit aligned, stride = %d, bytes = %d\n", + stride, stride_bytes); + return -EINVAL; + } + + /* IC channel's stride must be a multiple of 8 pixels */ + if ((channel <= 13) && (stride % 8)) { + dev_err(ipu->dev, "Stride must be 8 pixel multiple\n"); + return -EINVAL; + } + + /* Build parameter memory data for DMA channel */ + ipu_ch_param_set_size(¶ms, pixel_fmt, width, height, stride_bytes); + ipu_ch_param_set_buffer(¶ms, phyaddr_0, phyaddr_1); + ipu_ch_param_set_rotation(¶ms, rot_mode); + /* Some channels (rotation) have restriction on burst length */ + switch (channel) { + case IDMAC_IC_7: /* Hangs with burst 8, 16, other values + invalid - Table 44-30 */ +/* + ipu_ch_param_set_burst_size(¶ms, 8); + */ + break; + case IDMAC_SDC_0: + case IDMAC_SDC_1: + /* In original code only IPU_PIX_FMT_RGB565 was setting burst */ + ipu_ch_param_set_burst_size(¶ms, 16); + break; + case IDMAC_IC_0: + default: + break; + } + + spin_lock_irqsave(&ipu->lock, flags); + + ipu_write_param_mem(dma_param_addr(channel), (uint32_t *)¶ms, 10); + + reg = idmac_read_ipureg(ipu, IPU_CHA_DB_MODE_SEL); + + if (phyaddr_1) + reg |= 1UL << channel; + else + reg &= ~(1UL << channel); + + idmac_write_ipureg(ipu, reg, IPU_CHA_DB_MODE_SEL); + + ichan->status = IPU_CHANNEL_READY; + + spin_unlock_irqrestore(ipu->lock, flags); + + return 0; +} + +/** + * ipu_select_buffer() - mark a channel's buffer as ready. + * @channel: channel ID. + * @buffer_n: buffer number to mark ready. + */ +static void ipu_select_buffer(enum ipu_channel channel, int buffer_n) +{ + /* No locking - this is a write-one-to-set register, cleared by IPU */ + if (buffer_n == 0) + /* Mark buffer 0 as ready. */ + idmac_write_ipureg(&ipu_data, 1UL << channel, IPU_CHA_BUF0_RDY); + else + /* Mark buffer 1 as ready. */ + idmac_write_ipureg(&ipu_data, 1UL << channel, IPU_CHA_BUF1_RDY); +} + +/** + * ipu_update_channel_buffer() - update physical address of a channel buffer. + * @channel: channel ID. + * @buffer_n: buffer number to update. + * 0 or 1 are the only valid values. + * @phyaddr: buffer physical address. + * @return: Returns 0 on success or negative error code on failure. This + * function will fail if the buffer is set to ready. + */ +/* Called under spin_lock(_irqsave)(&ichan->lock) */ +static int ipu_update_channel_buffer(enum ipu_channel channel, + int buffer_n, dma_addr_t phyaddr) +{ + uint32_t reg; + unsigned long flags; + + spin_lock_irqsave(&ipu_data.lock, flags); + + if (buffer_n == 0) { + reg = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF0_RDY); + if (reg & (1UL << channel)) { + spin_unlock_irqrestore(&ipu_data.lock, flags); + return -EACCES; + } + + /* 44.3.3.1.9 - Row Number 1 (WORD1, offset 0) */ + idmac_write_ipureg(&ipu_data, dma_param_addr(channel) + + 0x0008UL, IPU_IMA_ADDR); + idmac_write_ipureg(&ipu_data, phyaddr, IPU_IMA_DATA); + } else { + reg = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF1_RDY); + if (reg & (1UL << channel)) { + spin_unlock_irqrestore(&ipu_data.lock, flags); + return -EACCES; + } + + /* Check if double-buffering is already enabled */ + reg = idmac_read_ipureg(&ipu_data, IPU_CHA_DB_MODE_SEL); + + if (!(reg & (1UL << channel))) + idmac_write_ipureg(&ipu_data, reg | (1UL << channel), + IPU_CHA_DB_MODE_SEL); + + /* 44.3.3.1.9 - Row Number 1 (WORD1, offset 1) */ + idmac_write_ipureg(&ipu_data, dma_param_addr(channel) + + 0x0009UL, IPU_IMA_ADDR); + idmac_write_ipureg(&ipu_data, phyaddr, IPU_IMA_DATA); + } + + spin_unlock_irqrestore(&ipu_data.lock, flags); + + return 0; +} + +/* Called under spin_lock_irqsave(&ichan->lock) */ +static int ipu_submit_channel_buffers(struct idmac_channel *ichan, + struct idmac_tx_desc *desc) +{ + struct scatterlist *sg; + int i, ret = 0; + + for (i = 0, sg = desc->sg; i < 2 && sg; i++) { + if (!ichan->sg[i]) { + ichan->sg[i] = sg; + + /* + * On first invocation this shouldn't be necessary, the + * call to ipu_init_channel_buffer() above will set + * addresses for us, so we could make it conditional + * on status >= IPU_CHANNEL_ENABLED, but doing it again + * shouldn't hurt either. + */ + ret = ipu_update_channel_buffer(ichan->dma_chan.chan_id, i, + sg_dma_address(sg)); + if (ret < 0) + return ret; + + ipu_select_buffer(ichan->dma_chan.chan_id, i); + + sg = sg_next(sg); + } + } + + return ret; +} + +static dma_cookie_t idmac_tx_submit(struct dma_async_tx_descriptor *tx) +{ + struct idmac_tx_desc *desc = to_tx_desc(tx); + struct idmac_channel *ichan = to_idmac_chan(tx->chan); + struct idmac *idmac = to_idmac(tx->chan->device); + struct ipu *ipu = to_ipu(idmac); + dma_cookie_t cookie; + unsigned long flags; + + /* Sanity check */ + if (!list_empty(&desc->list)) { + /* The descriptor doesn't belong to client */ + dev_err(&ichan->dma_chan.dev->device, + "Descriptor %p not prepared!\n", tx); + return -EBUSY; + } + + mutex_lock(&ichan->chan_mutex); + + if (ichan->status < IPU_CHANNEL_READY) { + struct idmac_video_param *video = &ichan->params.video; + /* + * Initial buffer assignment - the first two sg-entries from + * the descriptor will end up in the IDMAC buffers + */ + dma_addr_t dma_1 = sg_is_last(desc->sg) ? 0 : + sg_dma_address(&desc->sg[1]); + + WARN_ON(ichan->sg[0] || ichan->sg[1]); + + cookie = ipu_init_channel_buffer(ichan, + video->out_pixel_fmt, + video->out_width, + video->out_height, + video->out_stride, + IPU_ROTATE_NONE, + sg_dma_address(&desc->sg[0]), + dma_1); + if (cookie < 0) + goto out; + } + + /* ipu->lock can be taken under ichan->lock, but not v.v. */ + spin_lock_irqsave(&ichan->lock, flags); + + /* submit_buffers() atomically verifies and fills empty sg slots */ + cookie = ipu_submit_channel_buffers(ichan, desc); + + spin_unlock_irqrestore(&ichan->lock, flags); + + if (cookie < 0) + goto out; + + cookie = ichan->dma_chan.cookie; + + if (++cookie < 0) + cookie = 1; + + /* from dmaengine.h: "last cookie value returned to client" */ + ichan->dma_chan.cookie = cookie; + tx->cookie = cookie; + spin_lock_irqsave(&ichan->lock, flags); + list_add_tail(&desc->list, &ichan->queue); + spin_unlock_irqrestore(&ichan->lock, flags); + + if (ichan->status < IPU_CHANNEL_ENABLED) { + int ret = ipu_enable_channel(idmac, ichan); + if (ret < 0) { + cookie = ret; + spin_lock_irqsave(&ichan->lock, flags); + list_del_init(&desc->list); + spin_unlock_irqrestore(&ichan->lock, flags); + tx->cookie = cookie; + ichan->dma_chan.cookie = cookie; + } + } + + dump_idmac_reg(ipu); + +out: + mutex_unlock(&ichan->chan_mutex); + + return cookie; +} + +/* Called with ichan->chan_mutex held */ +static int idmac_desc_alloc(struct idmac_channel *ichan, int n) +{ + struct idmac_tx_desc *desc = vmalloc(n * sizeof(struct idmac_tx_desc)); + struct idmac *idmac = to_idmac(ichan->dma_chan.device); + + if (!desc) + return -ENOMEM; + + /* No interrupts, just disable the tasklet for a moment */ + tasklet_disable(&to_ipu(idmac)->tasklet); + + ichan->n_tx_desc = n; + ichan->desc = desc; + INIT_LIST_HEAD(&ichan->queue); + INIT_LIST_HEAD(&ichan->free_list); + + while (n--) { + struct dma_async_tx_descriptor *txd = &desc->txd; + + memset(txd, 0, sizeof(*txd)); + dma_async_tx_descriptor_init(txd, &ichan->dma_chan); + txd->tx_submit = idmac_tx_submit; + txd->chan = &ichan->dma_chan; + INIT_LIST_HEAD(&txd->tx_list); + + list_add(&desc->list, &ichan->free_list); + + desc++; + } + + tasklet_enable(&to_ipu(idmac)->tasklet); + + return 0; +} + +/** + * ipu_init_channel() - initialize an IPU channel. + * @idmac: IPU DMAC context. + * @ichan: pointer to the channel object. + * @return 0 on success or negative error code on failure. + */ +static int ipu_init_channel(struct idmac *idmac, struct idmac_channel *ichan) +{ + union ipu_channel_param *params = &ichan->params; + uint32_t ipu_conf; + enum ipu_channel channel = ichan->dma_chan.chan_id; + unsigned long flags; + uint32_t reg; + struct ipu *ipu = to_ipu(idmac); + int ret = 0, n_desc = 0; + + dev_dbg(ipu->dev, "init channel = %d\n", channel); + + if (channel != IDMAC_SDC_0 && channel != IDMAC_SDC_1 && + channel != IDMAC_IC_7) + return -EINVAL; + + spin_lock_irqsave(&ipu->lock, flags); + + switch (channel) { + case IDMAC_IC_7: + n_desc = 16; + reg = idmac_read_icreg(ipu, IC_CONF); + idmac_write_icreg(ipu, reg & ~IC_CONF_CSI_MEM_WR_EN, IC_CONF); + break; + case IDMAC_IC_0: + n_desc = 16; + reg = idmac_read_ipureg(ipu, IPU_FS_PROC_FLOW); + idmac_write_ipureg(ipu, reg & ~FS_ENC_IN_VALID, IPU_FS_PROC_FLOW); + ret = ipu_ic_init_prpenc(ipu, params, true); + break; + case IDMAC_SDC_0: + case IDMAC_SDC_1: + n_desc = 4; + default: + break; + } + + ipu->channel_init_mask |= 1L << channel; + + /* Enable IPU sub module */ + ipu_conf = idmac_read_ipureg(ipu, IPU_CONF) | + ipu_channel_conf_mask(channel); + idmac_write_ipureg(ipu, ipu_conf, IPU_CONF); + + spin_unlock_irqrestore(&ipu->lock, flags); + + if (n_desc && !ichan->desc) + ret = idmac_desc_alloc(ichan, n_desc); + + dump_idmac_reg(ipu); + + return ret; +} + +/** + * ipu_uninit_channel() - uninitialize an IPU channel. + * @idmac: IPU DMAC context. + * @ichan: pointer to the channel object. + */ +static void ipu_uninit_channel(struct idmac *idmac, struct idmac_channel *ichan) +{ + enum ipu_channel channel = ichan->dma_chan.chan_id; + unsigned long flags; + uint32_t reg; + unsigned long chan_mask = 1UL << channel; + uint32_t ipu_conf; + struct ipu *ipu = to_ipu(idmac); + + spin_lock_irqsave(&ipu->lock, flags); + + if (!(ipu->channel_init_mask & chan_mask)) { + dev_err(ipu->dev, "Channel already uninitialized %d\n", + channel); + spin_unlock_irqrestore(&ipu->lock, flags); + return; + } + + /* Reset the double buffer */ + reg = idmac_read_ipureg(ipu, IPU_CHA_DB_MODE_SEL); + idmac_write_ipureg(ipu, reg & ~chan_mask, IPU_CHA_DB_MODE_SEL); + + ichan->sec_chan_en = false; + + switch (channel) { + case IDMAC_IC_7: + reg = idmac_read_icreg(ipu, IC_CONF); + idmac_write_icreg(ipu, reg & ~(IC_CONF_RWS_EN | IC_CONF_PRPENC_EN), + IC_CONF); + break; + case IDMAC_IC_0: + reg = idmac_read_icreg(ipu, IC_CONF); + idmac_write_icreg(ipu, reg & ~(IC_CONF_PRPENC_EN | IC_CONF_PRPENC_CSC1), + IC_CONF); + break; + case IDMAC_SDC_0: + case IDMAC_SDC_1: + default: + break; + } + + ipu->channel_init_mask &= ~(1L << channel); + + ipu_conf = idmac_read_ipureg(ipu, IPU_CONF) & + ~ipu_channel_conf_mask(channel); + idmac_write_ipureg(ipu, ipu_conf, IPU_CONF); + + spin_unlock_irqrestore(&ipu->lock, flags); + + ichan->n_tx_desc = 0; + vfree(ichan->desc); + ichan->desc = NULL; +} + +/** + * ipu_disable_channel() - disable an IPU channel. + * @idmac: IPU DMAC context. + * @ichan: channel object pointer. + * @wait_for_stop: flag to set whether to wait for channel end of frame or + * return immediately. + * @return: 0 on success or negative error code on failure. + */ +static int ipu_disable_channel(struct idmac *idmac, struct idmac_channel *ichan, + bool wait_for_stop) +{ + enum ipu_channel channel = ichan->dma_chan.chan_id; + struct ipu *ipu = to_ipu(idmac); + uint32_t reg; + unsigned long flags; + unsigned long chan_mask = 1UL << channel; + unsigned int timeout; + + if (wait_for_stop && channel != IDMAC_SDC_1 && channel != IDMAC_SDC_0) { + timeout = 40; + /* This waiting always fails. Related to spurious irq problem */ + while ((idmac_read_icreg(ipu, IDMAC_CHA_BUSY) & chan_mask) || + (ipu_channel_status(ipu, channel) == TASK_STAT_ACTIVE)) { + timeout--; + msleep(10); + + if (!timeout) { + dev_dbg(ipu->dev, + "Warning: timeout waiting for channel %u to " + "stop: buf0_rdy = 0x%08X, buf1_rdy = 0x%08X, " + "busy = 0x%08X, tstat = 0x%08X\n", channel, + idmac_read_ipureg(ipu, IPU_CHA_BUF0_RDY), + idmac_read_ipureg(ipu, IPU_CHA_BUF1_RDY), + idmac_read_icreg(ipu, IDMAC_CHA_BUSY), + idmac_read_ipureg(ipu, IPU_TASKS_STAT)); + break; + } + } + dev_dbg(ipu->dev, "timeout = %d * 10ms\n", 40 - timeout); + } + /* SDC BG and FG must be disabled before DMA is disabled */ + if (wait_for_stop && (channel == IDMAC_SDC_0 || + channel == IDMAC_SDC_1)) { + for (timeout = 5; + timeout && !ipu_irq_status(ichan->eof_irq); timeout--) + msleep(5); + } + + spin_lock_irqsave(&ipu->lock, flags); + + /* Disable IC task */ + ipu_ic_disable_task(ipu, channel); + + /* Disable DMA channel(s) */ + reg = idmac_read_icreg(ipu, IDMAC_CHA_EN); + idmac_write_icreg(ipu, reg & ~chan_mask, IDMAC_CHA_EN); + + /* + * Problem (observed with channel DMAIC_7): after enabling the channel + * and initialising buffers, there comes an interrupt with current still + * pointing at buffer 0, whereas it should use buffer 0 first and only + * generate an interrupt when it is done, then current should already + * point to buffer 1. This spurious interrupt also comes on channel + * DMASDC_0. With DMAIC_7 normally, is we just leave the ISR after the + * first interrupt, there comes the second with current correctly + * pointing to buffer 1 this time. But sometimes this second interrupt + * doesn't come and the channel hangs. Clearing BUFx_RDY when disabling + * the channel seems to prevent the channel from hanging, but it doesn't + * prevent the spurious interrupt. This might also be unsafe. Think + * about the IDMAC controller trying to switch to a buffer, when we + * clear the ready bit, and re-enable it a moment later. + */ + reg = idmac_read_ipureg(ipu, IPU_CHA_BUF0_RDY); + idmac_write_ipureg(ipu, 0, IPU_CHA_BUF0_RDY); + idmac_write_ipureg(ipu, reg & ~(1UL << channel), IPU_CHA_BUF0_RDY); + + reg = idmac_read_ipureg(ipu, IPU_CHA_BUF1_RDY); + idmac_write_ipureg(ipu, 0, IPU_CHA_BUF1_RDY); + idmac_write_ipureg(ipu, reg & ~(1UL << channel), IPU_CHA_BUF1_RDY); + + spin_unlock_irqrestore(&ipu->lock, flags); + + return 0; +} + +/* + * We have several possibilities here: + * current BUF next BUF + * + * not last sg next not last sg + * not last sg next last sg + * last sg first sg from next descriptor + * last sg NULL + * + * Besides, the descriptor queue might be empty or not. We process all these + * cases carefully. + */ +static irqreturn_t idmac_interrupt(int irq, void *dev_id) +{ + struct idmac_channel *ichan = dev_id; + unsigned int chan_id = ichan->dma_chan.chan_id; + struct scatterlist **sg, *sgnext, *sgnew = NULL; + /* Next transfer descriptor */ + struct idmac_tx_desc *desc = NULL, *descnew; + dma_async_tx_callback callback; + void *callback_param; + bool done = false; + u32 ready0 = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF0_RDY), + ready1 = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF1_RDY), + curbuf = idmac_read_ipureg(&ipu_data, IPU_CHA_CUR_BUF); + + /* IDMAC has cleared the respective BUFx_RDY bit, we manage the buffer */ + + pr_debug("IDMAC irq %d\n", irq); + /* Other interrupts do not interfere with this channel */ + spin_lock(&ichan->lock); + + if (unlikely(chan_id != IDMAC_SDC_0 && chan_id != IDMAC_SDC_1 && + ((curbuf >> chan_id) & 1) == ichan->active_buffer)) { + int i = 100; + + /* This doesn't help. See comment in ipu_disable_channel() */ + while (--i) { + curbuf = idmac_read_ipureg(&ipu_data, IPU_CHA_CUR_BUF); + if (((curbuf >> chan_id) & 1) != ichan->active_buffer) + break; + cpu_relax(); + } + + if (!i) { + spin_unlock(&ichan->lock); + dev_dbg(ichan->dma_chan.device->dev, + "IRQ on active buffer on channel %x, active " + "%d, ready %x, %x, current %x!\n", chan_id, + ichan->active_buffer, ready0, ready1, curbuf); + return IRQ_NONE; + } + } + + if (unlikely((ichan->active_buffer && (ready1 >> chan_id) & 1) || + (!ichan->active_buffer && (ready0 >> chan_id) & 1) + )) { + spin_unlock(&ichan->lock); + dev_dbg(ichan->dma_chan.device->dev, + "IRQ with active buffer still ready on channel %x, " + "active %d, ready %x, %x!\n", chan_id, + ichan->active_buffer, ready0, ready1); + return IRQ_NONE; + } + + if (unlikely(list_empty(&ichan->queue))) { + spin_unlock(&ichan->lock); + dev_err(ichan->dma_chan.device->dev, + "IRQ without queued buffers on channel %x, active %d, " + "ready %x, %x!\n", chan_id, + ichan->active_buffer, ready0, ready1); + return IRQ_NONE; + } + + /* + * active_buffer is a software flag, it shows which buffer we are + * currently expecting back from the hardware, IDMAC should be + * processing the other buffer already + */ + sg = &ichan->sg[ichan->active_buffer]; + sgnext = ichan->sg[!ichan->active_buffer]; + + /* + * if sgnext == NULL sg must be the last element in a scatterlist and + * queue must be empty + */ + if (unlikely(!sgnext)) { + if (unlikely(sg_next(*sg))) { + dev_err(ichan->dma_chan.device->dev, + "Broken buffer-update locking on channel %x!\n", + chan_id); + /* We'll let the user catch up */ + } else { + /* Underrun */ + ipu_ic_disable_task(&ipu_data, chan_id); + dev_dbg(ichan->dma_chan.device->dev, + "Underrun on channel %x\n", chan_id); + ichan->status = IPU_CHANNEL_READY; + /* Continue to check for complete descriptor */ + } + } + + desc = list_entry(ichan->queue.next, struct idmac_tx_desc, list); + + /* First calculate and submit the next sg element */ + if (likely(sgnext)) + sgnew = sg_next(sgnext); + + if (unlikely(!sgnew)) { + /* Start a new scatterlist, if any queued */ + if (likely(desc->list.next != &ichan->queue)) { + descnew = list_entry(desc->list.next, + struct idmac_tx_desc, list); + sgnew = &descnew->sg[0]; + } + } + + if (unlikely(!sg_next(*sg)) || !sgnext) { + /* + * Last element in scatterlist done, remove from the queue, + * _init for debugging + */ + list_del_init(&desc->list); + done = true; + } + + *sg = sgnew; + + if (likely(sgnew)) { + int ret; + + ret = ipu_update_channel_buffer(chan_id, ichan->active_buffer, + sg_dma_address(*sg)); + if (ret < 0) + dev_err(ichan->dma_chan.device->dev, + "Failed to update buffer on channel %x buffer %d!\n", + chan_id, ichan->active_buffer); + else + ipu_select_buffer(chan_id, ichan->active_buffer); + } + + /* Flip the active buffer - even if update above failed */ + ichan->active_buffer = !ichan->active_buffer; + if (done) + ichan->completed = desc->txd.cookie; + + callback = desc->txd.callback; + callback_param = desc->txd.callback_param; + + spin_unlock(&ichan->lock); + + if (done && (desc->txd.flags & DMA_PREP_INTERRUPT) && callback) + callback(callback_param); + + return IRQ_HANDLED; +} + +static void ipu_gc_tasklet(unsigned long arg) +{ + struct ipu *ipu = (struct ipu *)arg; + int i; + + for (i = 0; i < IPU_CHANNELS_NUM; i++) { + struct idmac_channel *ichan = ipu->channel + i; + struct idmac_tx_desc *desc; + unsigned long flags; + int j; + + for (j = 0; j < ichan->n_tx_desc; j++) { + desc = ichan->desc + j; + spin_lock_irqsave(&ichan->lock, flags); + if (async_tx_test_ack(&desc->txd)) { + list_move(&desc->list, &ichan->free_list); + async_tx_clear_ack(&desc->txd); + } + spin_unlock_irqrestore(&ichan->lock, flags); + } + } +} + +/* + * At the time .device_alloc_chan_resources() method is called, we cannot know, + * whether the client will accept the channel. Thus we must only check, if we + * can satisfy client's request but the only real criterion to verify, whether + * the client has accepted our offer is the client_count. That's why we have to + * perform the rest of our allocation tasks on the first call to this function. + */ +static struct dma_async_tx_descriptor *idmac_prep_slave_sg(struct dma_chan *chan, + struct scatterlist *sgl, unsigned int sg_len, + enum dma_data_direction direction, unsigned long tx_flags) +{ + struct idmac_channel *ichan = to_idmac_chan(chan); + struct idmac_tx_desc *desc = NULL; + struct dma_async_tx_descriptor *txd = NULL; + unsigned long flags; + + /* We only can handle these three channels so far */ + if (ichan->dma_chan.chan_id != IDMAC_SDC_0 && ichan->dma_chan.chan_id != IDMAC_SDC_1 && + ichan->dma_chan.chan_id != IDMAC_IC_7) + return NULL; + + if (direction != DMA_FROM_DEVICE && direction != DMA_TO_DEVICE) { + dev_err(chan->device->dev, "Invalid DMA direction %d!\n", direction); + return NULL; + } + + mutex_lock(&ichan->chan_mutex); + + spin_lock_irqsave(&ichan->lock, flags); + if (!list_empty(&ichan->free_list)) { + desc = list_entry(ichan->free_list.next, + struct idmac_tx_desc, list); + + list_del_init(&desc->list); + + desc->sg_len = sg_len; + desc->sg = sgl; + txd = &desc->txd; + txd->flags = tx_flags; + } + spin_unlock_irqrestore(&ichan->lock, flags); + + mutex_unlock(&ichan->chan_mutex); + + tasklet_schedule(&to_ipu(to_idmac(chan->device))->tasklet); + + return txd; +} + +/* Re-select the current buffer and re-activate the channel */ +static void idmac_issue_pending(struct dma_chan *chan) +{ + struct idmac_channel *ichan = to_idmac_chan(chan); + struct idmac *idmac = to_idmac(chan->device); + struct ipu *ipu = to_ipu(idmac); + unsigned long flags; + + /* This is not always needed, but doesn't hurt either */ + spin_lock_irqsave(&ipu->lock, flags); + ipu_select_buffer(ichan->dma_chan.chan_id, ichan->active_buffer); + spin_unlock_irqrestore(&ipu->lock, flags); + + /* + * Might need to perform some parts of initialisation from + * ipu_enable_channel(), but not all, we do not want to reset to buffer + * 0, don't need to set priority again either, but re-enabling the task + * and the channel might be a good idea. + */ +} + +static void __idmac_terminate_all(struct dma_chan *chan) +{ + struct idmac_channel *ichan = to_idmac_chan(chan); + struct idmac *idmac = to_idmac(chan->device); + unsigned long flags; + int i; + + ipu_disable_channel(idmac, ichan, + ichan->status >= IPU_CHANNEL_ENABLED); + + tasklet_disable(&to_ipu(idmac)->tasklet); + + /* ichan->queue is modified in ISR, have to spinlock */ + spin_lock_irqsave(&ichan->lock, flags); + list_splice_init(&ichan->queue, &ichan->free_list); + + if (ichan->desc) + for (i = 0; i < ichan->n_tx_desc; i++) { + struct idmac_tx_desc *desc = ichan->desc + i; + if (list_empty(&desc->list)) + /* Descriptor was prepared, but not submitted */ + list_add(&desc->list, + &ichan->free_list); + + async_tx_clear_ack(&desc->txd); + } + + ichan->sg[0] = NULL; + ichan->sg[1] = NULL; + spin_unlock_irqrestore(&ichan->lock, flags); + + tasklet_enable(&to_ipu(idmac)->tasklet); + + ichan->status = IPU_CHANNEL_INITIALIZED; +} + +static void idmac_terminate_all(struct dma_chan *chan) +{ + struct idmac_channel *ichan = to_idmac_chan(chan); + + mutex_lock(&ichan->chan_mutex); + + __idmac_terminate_all(chan); + + mutex_unlock(&ichan->chan_mutex); +} + +static int idmac_alloc_chan_resources(struct dma_chan *chan) +{ + struct idmac_channel *ichan = to_idmac_chan(chan); + struct idmac *idmac = to_idmac(chan->device); + int ret; + + /* dmaengine.c now guarantees to only offer free channels */ + BUG_ON(chan->client_count > 1); + WARN_ON(ichan->status != IPU_CHANNEL_FREE); + + chan->cookie = 1; + ichan->completed = -ENXIO; + + ret = ipu_irq_map(ichan->dma_chan.chan_id); + if (ret < 0) + goto eimap; + + ichan->eof_irq = ret; + ret = request_irq(ichan->eof_irq, idmac_interrupt, 0, + ichan->eof_name, ichan); + if (ret < 0) + goto erirq; + + ret = ipu_init_channel(idmac, ichan); + if (ret < 0) + goto eichan; + + ichan->status = IPU_CHANNEL_INITIALIZED; + + dev_dbg(&ichan->dma_chan.dev->device, "Found channel 0x%x, irq %d\n", + ichan->dma_chan.chan_id, ichan->eof_irq); + + return ret; + +eichan: + free_irq(ichan->eof_irq, ichan); +erirq: + ipu_irq_unmap(ichan->dma_chan.chan_id); +eimap: + return ret; +} + +static void idmac_free_chan_resources(struct dma_chan *chan) +{ + struct idmac_channel *ichan = to_idmac_chan(chan); + struct idmac *idmac = to_idmac(chan->device); + + mutex_lock(&ichan->chan_mutex); + + __idmac_terminate_all(chan); + + if (ichan->status > IPU_CHANNEL_FREE) { + free_irq(ichan->eof_irq, ichan); + ipu_irq_unmap(ichan->dma_chan.chan_id); + } + + ichan->status = IPU_CHANNEL_FREE; + + ipu_uninit_channel(idmac, ichan); + + mutex_unlock(&ichan->chan_mutex); + + tasklet_schedule(&to_ipu(idmac)->tasklet); +} + +static enum dma_status idmac_is_tx_complete(struct dma_chan *chan, + dma_cookie_t cookie, dma_cookie_t *done, dma_cookie_t *used) +{ + struct idmac_channel *ichan = to_idmac_chan(chan); + + if (done) + *done = ichan->completed; + if (used) + *used = chan->cookie; + if (cookie != chan->cookie) + return DMA_ERROR; + return DMA_SUCCESS; +} + +static int __init ipu_idmac_init(struct ipu *ipu) +{ + struct idmac *idmac = &ipu->idmac; + struct dma_device *dma = &idmac->dma; + int i; + + dma_cap_set(DMA_SLAVE, dma->cap_mask); + dma_cap_set(DMA_PRIVATE, dma->cap_mask); + + /* Compulsory common fields */ + dma->dev = ipu->dev; + dma->device_alloc_chan_resources = idmac_alloc_chan_resources; + dma->device_free_chan_resources = idmac_free_chan_resources; + dma->device_is_tx_complete = idmac_is_tx_complete; + dma->device_issue_pending = idmac_issue_pending; + + /* Compulsory for DMA_SLAVE fields */ + dma->device_prep_slave_sg = idmac_prep_slave_sg; + dma->device_terminate_all = idmac_terminate_all; + + INIT_LIST_HEAD(&dma->channels); + for (i = 0; i < IPU_CHANNELS_NUM; i++) { + struct idmac_channel *ichan = ipu->channel + i; + struct dma_chan *dma_chan = &ichan->dma_chan; + + spin_lock_init(&ichan->lock); + mutex_init(&ichan->chan_mutex); + + ichan->status = IPU_CHANNEL_FREE; + ichan->sec_chan_en = false; + ichan->completed = -ENXIO; + snprintf(ichan->eof_name, sizeof(ichan->eof_name), "IDMAC EOF %d", i); + + dma_chan->device = &idmac->dma; + dma_chan->cookie = 1; + dma_chan->chan_id = i; + list_add_tail(&ichan->dma_chan.device_node, &dma->channels); + } + + idmac_write_icreg(ipu, 0x00000070, IDMAC_CONF); + + return dma_async_device_register(&idmac->dma); +} + +static void ipu_idmac_exit(struct ipu *ipu) +{ + int i; + struct idmac *idmac = &ipu->idmac; + + for (i = 0; i < IPU_CHANNELS_NUM; i++) { + struct idmac_channel *ichan = ipu->channel + i; + + idmac_terminate_all(&ichan->dma_chan); + idmac_prep_slave_sg(&ichan->dma_chan, NULL, 0, DMA_NONE, 0); + } + + dma_async_device_unregister(&idmac->dma); +} + +/***************************************************************************** + * IPU common probe / remove + */ + +static int ipu_probe(struct platform_device *pdev) +{ + struct ipu_platform_data *pdata = pdev->dev.platform_data; + struct resource *mem_ipu, *mem_ic; + int ret; + + spin_lock_init(&ipu_data.lock); + + mem_ipu = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mem_ic = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!pdata || !mem_ipu || !mem_ic) + return -EINVAL; + + ipu_data.dev = &pdev->dev; + + platform_set_drvdata(pdev, &ipu_data); + + ret = platform_get_irq(pdev, 0); + if (ret < 0) + goto err_noirq; + + ipu_data.irq_fn = ret; + ret = platform_get_irq(pdev, 1); + if (ret < 0) + goto err_noirq; + + ipu_data.irq_err = ret; + ipu_data.irq_base = pdata->irq_base; + + dev_dbg(&pdev->dev, "fn irq %u, err irq %u, irq-base %u\n", + ipu_data.irq_fn, ipu_data.irq_err, ipu_data.irq_base); + + /* Remap IPU common registers */ + ipu_data.reg_ipu = ioremap(mem_ipu->start, + mem_ipu->end - mem_ipu->start + 1); + if (!ipu_data.reg_ipu) { + ret = -ENOMEM; + goto err_ioremap_ipu; + } + + /* Remap Image Converter and Image DMA Controller registers */ + ipu_data.reg_ic = ioremap(mem_ic->start, + mem_ic->end - mem_ic->start + 1); + if (!ipu_data.reg_ic) { + ret = -ENOMEM; + goto err_ioremap_ic; + } + + /* Get IPU clock */ + ipu_data.ipu_clk = clk_get(&pdev->dev, "ipu_clk"); + if (IS_ERR(ipu_data.ipu_clk)) { + ret = PTR_ERR(ipu_data.ipu_clk); + goto err_clk_get; + } + + /* Make sure IPU HSP clock is running */ + clk_enable(ipu_data.ipu_clk); + + /* Disable all interrupts */ + idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_1); + idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_2); + idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_3); + idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_4); + idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_5); + + dev_dbg(&pdev->dev, "%s @ 0x%08lx, fn irq %u, err irq %u\n", pdev->name, + (unsigned long)mem_ipu->start, ipu_data.irq_fn, ipu_data.irq_err); + + ret = ipu_irq_attach_irq(&ipu_data, pdev); + if (ret < 0) + goto err_attach_irq; + + /* Initialize DMA engine */ + ret = ipu_idmac_init(&ipu_data); + if (ret < 0) + goto err_idmac_init; + + tasklet_init(&ipu_data.tasklet, ipu_gc_tasklet, (unsigned long)&ipu_data); + + ipu_data.dev = &pdev->dev; + + dev_dbg(ipu_data.dev, "IPU initialized\n"); + + return 0; + +err_idmac_init: +err_attach_irq: + ipu_irq_detach_irq(&ipu_data, pdev); + clk_disable(ipu_data.ipu_clk); + clk_put(ipu_data.ipu_clk); +err_clk_get: + iounmap(ipu_data.reg_ic); +err_ioremap_ic: + iounmap(ipu_data.reg_ipu); +err_ioremap_ipu: +err_noirq: + dev_err(&pdev->dev, "Failed to probe IPU: %d\n", ret); + return ret; +} + +static int ipu_remove(struct platform_device *pdev) +{ + struct ipu *ipu = platform_get_drvdata(pdev); + + ipu_idmac_exit(ipu); + ipu_irq_detach_irq(ipu, pdev); + clk_disable(ipu->ipu_clk); + clk_put(ipu->ipu_clk); + iounmap(ipu->reg_ic); + iounmap(ipu->reg_ipu); + tasklet_kill(&ipu->tasklet); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +/* + * We need two MEM resources - with IPU-common and Image Converter registers, + * including PF_CONF and IDMAC_* registers, and two IRQs - function and error + */ +static struct platform_driver ipu_platform_driver = { + .driver = { + .name = "ipu-core", + .owner = THIS_MODULE, + }, + .remove = ipu_remove, +}; + +static int __init ipu_init(void) +{ + return platform_driver_probe(&ipu_platform_driver, ipu_probe); +} +subsys_initcall(ipu_init); + +MODULE_DESCRIPTION("IPU core driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Guennadi Liakhovetski "); +MODULE_ALIAS("platform:ipu-core"); diff --git a/drivers/dma/ipu/ipu_intern.h b/drivers/dma/ipu/ipu_intern.h new file mode 100644 index 000000000000..545cf11a94ab --- /dev/null +++ b/drivers/dma/ipu/ipu_intern.h @@ -0,0 +1,176 @@ +/* + * Copyright (C) 2008 + * Guennadi Liakhovetski, DENX Software Engineering, + * + * Copyright (C) 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _IPU_INTERN_H_ +#define _IPU_INTERN_H_ + +#include +#include +#include + +/* IPU Common registers */ +#define IPU_CONF 0x00 +#define IPU_CHA_BUF0_RDY 0x04 +#define IPU_CHA_BUF1_RDY 0x08 +#define IPU_CHA_DB_MODE_SEL 0x0C +#define IPU_CHA_CUR_BUF 0x10 +#define IPU_FS_PROC_FLOW 0x14 +#define IPU_FS_DISP_FLOW 0x18 +#define IPU_TASKS_STAT 0x1C +#define IPU_IMA_ADDR 0x20 +#define IPU_IMA_DATA 0x24 +#define IPU_INT_CTRL_1 0x28 +#define IPU_INT_CTRL_2 0x2C +#define IPU_INT_CTRL_3 0x30 +#define IPU_INT_CTRL_4 0x34 +#define IPU_INT_CTRL_5 0x38 +#define IPU_INT_STAT_1 0x3C +#define IPU_INT_STAT_2 0x40 +#define IPU_INT_STAT_3 0x44 +#define IPU_INT_STAT_4 0x48 +#define IPU_INT_STAT_5 0x4C +#define IPU_BRK_CTRL_1 0x50 +#define IPU_BRK_CTRL_2 0x54 +#define IPU_BRK_STAT 0x58 +#define IPU_DIAGB_CTRL 0x5C + +/* IPU_CONF Register bits */ +#define IPU_CONF_CSI_EN 0x00000001 +#define IPU_CONF_IC_EN 0x00000002 +#define IPU_CONF_ROT_EN 0x00000004 +#define IPU_CONF_PF_EN 0x00000008 +#define IPU_CONF_SDC_EN 0x00000010 +#define IPU_CONF_ADC_EN 0x00000020 +#define IPU_CONF_DI_EN 0x00000040 +#define IPU_CONF_DU_EN 0x00000080 +#define IPU_CONF_PXL_ENDIAN 0x00000100 + +/* Image Converter Registers */ +#define IC_CONF 0x88 +#define IC_PRP_ENC_RSC 0x8C +#define IC_PRP_VF_RSC 0x90 +#define IC_PP_RSC 0x94 +#define IC_CMBP_1 0x98 +#define IC_CMBP_2 0x9C +#define PF_CONF 0xA0 +#define IDMAC_CONF 0xA4 +#define IDMAC_CHA_EN 0xA8 +#define IDMAC_CHA_PRI 0xAC +#define IDMAC_CHA_BUSY 0xB0 + +/* Image Converter Register bits */ +#define IC_CONF_PRPENC_EN 0x00000001 +#define IC_CONF_PRPENC_CSC1 0x00000002 +#define IC_CONF_PRPENC_ROT_EN 0x00000004 +#define IC_CONF_PRPVF_EN 0x00000100 +#define IC_CONF_PRPVF_CSC1 0x00000200 +#define IC_CONF_PRPVF_CSC2 0x00000400 +#define IC_CONF_PRPVF_CMB 0x00000800 +#define IC_CONF_PRPVF_ROT_EN 0x00001000 +#define IC_CONF_PP_EN 0x00010000 +#define IC_CONF_PP_CSC1 0x00020000 +#define IC_CONF_PP_CSC2 0x00040000 +#define IC_CONF_PP_CMB 0x00080000 +#define IC_CONF_PP_ROT_EN 0x00100000 +#define IC_CONF_IC_GLB_LOC_A 0x10000000 +#define IC_CONF_KEY_COLOR_EN 0x20000000 +#define IC_CONF_RWS_EN 0x40000000 +#define IC_CONF_CSI_MEM_WR_EN 0x80000000 + +#define IDMA_CHAN_INVALID 0x000000FF +#define IDMA_IC_0 0x00000001 +#define IDMA_IC_1 0x00000002 +#define IDMA_IC_2 0x00000004 +#define IDMA_IC_3 0x00000008 +#define IDMA_IC_4 0x00000010 +#define IDMA_IC_5 0x00000020 +#define IDMA_IC_6 0x00000040 +#define IDMA_IC_7 0x00000080 +#define IDMA_IC_8 0x00000100 +#define IDMA_IC_9 0x00000200 +#define IDMA_IC_10 0x00000400 +#define IDMA_IC_11 0x00000800 +#define IDMA_IC_12 0x00001000 +#define IDMA_IC_13 0x00002000 +#define IDMA_SDC_BG 0x00004000 +#define IDMA_SDC_FG 0x00008000 +#define IDMA_SDC_MASK 0x00010000 +#define IDMA_SDC_PARTIAL 0x00020000 +#define IDMA_ADC_SYS1_WR 0x00040000 +#define IDMA_ADC_SYS2_WR 0x00080000 +#define IDMA_ADC_SYS1_CMD 0x00100000 +#define IDMA_ADC_SYS2_CMD 0x00200000 +#define IDMA_ADC_SYS1_RD 0x00400000 +#define IDMA_ADC_SYS2_RD 0x00800000 +#define IDMA_PF_QP 0x01000000 +#define IDMA_PF_BSP 0x02000000 +#define IDMA_PF_Y_IN 0x04000000 +#define IDMA_PF_U_IN 0x08000000 +#define IDMA_PF_V_IN 0x10000000 +#define IDMA_PF_Y_OUT 0x20000000 +#define IDMA_PF_U_OUT 0x40000000 +#define IDMA_PF_V_OUT 0x80000000 + +#define TSTAT_PF_H264_PAUSE 0x00000001 +#define TSTAT_CSI2MEM_MASK 0x0000000C +#define TSTAT_CSI2MEM_OFFSET 2 +#define TSTAT_VF_MASK 0x00000600 +#define TSTAT_VF_OFFSET 9 +#define TSTAT_VF_ROT_MASK 0x000C0000 +#define TSTAT_VF_ROT_OFFSET 18 +#define TSTAT_ENC_MASK 0x00000180 +#define TSTAT_ENC_OFFSET 7 +#define TSTAT_ENC_ROT_MASK 0x00030000 +#define TSTAT_ENC_ROT_OFFSET 16 +#define TSTAT_PP_MASK 0x00001800 +#define TSTAT_PP_OFFSET 11 +#define TSTAT_PP_ROT_MASK 0x00300000 +#define TSTAT_PP_ROT_OFFSET 20 +#define TSTAT_PF_MASK 0x00C00000 +#define TSTAT_PF_OFFSET 22 +#define TSTAT_ADCSYS1_MASK 0x03000000 +#define TSTAT_ADCSYS1_OFFSET 24 +#define TSTAT_ADCSYS2_MASK 0x0C000000 +#define TSTAT_ADCSYS2_OFFSET 26 + +#define TASK_STAT_IDLE 0 +#define TASK_STAT_ACTIVE 1 +#define TASK_STAT_WAIT4READY 2 + +struct idmac { + struct dma_device dma; +}; + +struct ipu { + void __iomem *reg_ipu; + void __iomem *reg_ic; + unsigned int irq_fn; /* IPU Function IRQ to the CPU */ + unsigned int irq_err; /* IPU Error IRQ to the CPU */ + unsigned int irq_base; /* Beginning of the IPU IRQ range */ + unsigned long channel_init_mask; + spinlock_t lock; + struct clk *ipu_clk; + struct device *dev; + struct idmac idmac; + struct idmac_channel channel[IPU_CHANNELS_NUM]; + struct tasklet_struct tasklet; +}; + +#define to_idmac(d) container_of(d, struct idmac, dma) + +extern int ipu_irq_attach_irq(struct ipu *ipu, struct platform_device *dev); +extern void ipu_irq_detach_irq(struct ipu *ipu, struct platform_device *dev); + +extern bool ipu_irq_status(uint32_t irq); +extern int ipu_irq_map(unsigned int source); +extern int ipu_irq_unmap(unsigned int source); + +#endif diff --git a/drivers/dma/ipu/ipu_irq.c b/drivers/dma/ipu/ipu_irq.c new file mode 100644 index 000000000000..83f532cc767f --- /dev/null +++ b/drivers/dma/ipu/ipu_irq.c @@ -0,0 +1,413 @@ +/* + * Copyright (C) 2008 + * Guennadi Liakhovetski, DENX Software Engineering, + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "ipu_intern.h" + +/* + * Register read / write - shall be inlined by the compiler + */ +static u32 ipu_read_reg(struct ipu *ipu, unsigned long reg) +{ + return __raw_readl(ipu->reg_ipu + reg); +} + +static void ipu_write_reg(struct ipu *ipu, u32 value, unsigned long reg) +{ + __raw_writel(value, ipu->reg_ipu + reg); +} + + +/* + * IPU IRQ chip driver + */ + +#define IPU_IRQ_NR_FN_BANKS 3 +#define IPU_IRQ_NR_ERR_BANKS 2 +#define IPU_IRQ_NR_BANKS (IPU_IRQ_NR_FN_BANKS + IPU_IRQ_NR_ERR_BANKS) + +struct ipu_irq_bank { + unsigned int control; + unsigned int status; + spinlock_t lock; + struct ipu *ipu; +}; + +static struct ipu_irq_bank irq_bank[IPU_IRQ_NR_BANKS] = { + /* 3 groups of functional interrupts */ + { + .control = IPU_INT_CTRL_1, + .status = IPU_INT_STAT_1, + }, { + .control = IPU_INT_CTRL_2, + .status = IPU_INT_STAT_2, + }, { + .control = IPU_INT_CTRL_3, + .status = IPU_INT_STAT_3, + }, + /* 2 groups of error interrupts */ + { + .control = IPU_INT_CTRL_4, + .status = IPU_INT_STAT_4, + }, { + .control = IPU_INT_CTRL_5, + .status = IPU_INT_STAT_5, + }, +}; + +struct ipu_irq_map { + unsigned int irq; + int source; + struct ipu_irq_bank *bank; + struct ipu *ipu; +}; + +static struct ipu_irq_map irq_map[CONFIG_MX3_IPU_IRQS]; +/* Protects allocations from the above array of maps */ +static DEFINE_MUTEX(map_lock); +/* Protects register accesses and individual mappings */ +static DEFINE_SPINLOCK(bank_lock); + +static struct ipu_irq_map *src2map(unsigned int src) +{ + int i; + + for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) + if (irq_map[i].source == src) + return irq_map + i; + + return NULL; +} + +static void ipu_irq_unmask(unsigned int irq) +{ + struct ipu_irq_map *map = get_irq_chip_data(irq); + struct ipu_irq_bank *bank; + uint32_t reg; + unsigned long lock_flags; + + spin_lock_irqsave(&bank_lock, lock_flags); + + bank = map->bank; + if (!bank) { + spin_unlock_irqrestore(&bank_lock, lock_flags); + pr_err("IPU: %s(%u) - unmapped!\n", __func__, irq); + return; + } + + reg = ipu_read_reg(bank->ipu, bank->control); + reg |= (1UL << (map->source & 31)); + ipu_write_reg(bank->ipu, reg, bank->control); + + spin_unlock_irqrestore(&bank_lock, lock_flags); +} + +static void ipu_irq_mask(unsigned int irq) +{ + struct ipu_irq_map *map = get_irq_chip_data(irq); + struct ipu_irq_bank *bank; + uint32_t reg; + unsigned long lock_flags; + + spin_lock_irqsave(&bank_lock, lock_flags); + + bank = map->bank; + if (!bank) { + spin_unlock_irqrestore(&bank_lock, lock_flags); + pr_err("IPU: %s(%u) - unmapped!\n", __func__, irq); + return; + } + + reg = ipu_read_reg(bank->ipu, bank->control); + reg &= ~(1UL << (map->source & 31)); + ipu_write_reg(bank->ipu, reg, bank->control); + + spin_unlock_irqrestore(&bank_lock, lock_flags); +} + +static void ipu_irq_ack(unsigned int irq) +{ + struct ipu_irq_map *map = get_irq_chip_data(irq); + struct ipu_irq_bank *bank; + unsigned long lock_flags; + + spin_lock_irqsave(&bank_lock, lock_flags); + + bank = map->bank; + if (!bank) { + spin_unlock_irqrestore(&bank_lock, lock_flags); + pr_err("IPU: %s(%u) - unmapped!\n", __func__, irq); + return; + } + + ipu_write_reg(bank->ipu, 1UL << (map->source & 31), bank->status); + spin_unlock_irqrestore(&bank_lock, lock_flags); +} + +/** + * ipu_irq_status() - returns the current interrupt status of the specified IRQ. + * @irq: interrupt line to get status for. + * @return: true if the interrupt is pending/asserted or false if the + * interrupt is not pending. + */ +bool ipu_irq_status(unsigned int irq) +{ + struct ipu_irq_map *map = get_irq_chip_data(irq); + struct ipu_irq_bank *bank; + unsigned long lock_flags; + bool ret; + + spin_lock_irqsave(&bank_lock, lock_flags); + bank = map->bank; + ret = bank && ipu_read_reg(bank->ipu, bank->status) & + (1UL << (map->source & 31)); + spin_unlock_irqrestore(&bank_lock, lock_flags); + + return ret; +} + +/** + * ipu_irq_map() - map an IPU interrupt source to an IRQ number + * @source: interrupt source bit position (see below) + * @return: mapped IRQ number or negative error code + * + * The source parameter has to be explained further. On i.MX31 IPU has 137 IRQ + * sources, they are broken down in 5 32-bit registers, like 32, 32, 24, 32, 17. + * However, the source argument of this function is not the sequence number of + * the possible IRQ, but rather its bit position. So, first interrupt in fourth + * register has source number 96, and not 88. This makes calculations easier, + * and also provides forward compatibility with any future IPU implementations + * with any interrupt bit assignments. + */ +int ipu_irq_map(unsigned int source) +{ + int i, ret = -ENOMEM; + struct ipu_irq_map *map; + + might_sleep(); + + mutex_lock(&map_lock); + map = src2map(source); + if (map) { + pr_err("IPU: Source %u already mapped to IRQ %u\n", source, map->irq); + ret = -EBUSY; + goto out; + } + + for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) { + if (irq_map[i].source < 0) { + unsigned long lock_flags; + + spin_lock_irqsave(&bank_lock, lock_flags); + irq_map[i].source = source; + irq_map[i].bank = irq_bank + source / 32; + spin_unlock_irqrestore(&bank_lock, lock_flags); + + ret = irq_map[i].irq; + pr_debug("IPU: mapped source %u to IRQ %u\n", + source, ret); + break; + } + } +out: + mutex_unlock(&map_lock); + + if (ret < 0) + pr_err("IPU: couldn't map source %u: %d\n", source, ret); + + return ret; +} + +/** + * ipu_irq_map() - map an IPU interrupt source to an IRQ number + * @source: interrupt source bit position (see ipu_irq_map()) + * @return: 0 or negative error code + */ +int ipu_irq_unmap(unsigned int source) +{ + int i, ret = -EINVAL; + + might_sleep(); + + mutex_lock(&map_lock); + for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) { + if (irq_map[i].source == source) { + unsigned long lock_flags; + + pr_debug("IPU: unmapped source %u from IRQ %u\n", + source, irq_map[i].irq); + + spin_lock_irqsave(&bank_lock, lock_flags); + irq_map[i].source = -EINVAL; + irq_map[i].bank = NULL; + spin_unlock_irqrestore(&bank_lock, lock_flags); + + ret = 0; + break; + } + } + mutex_unlock(&map_lock); + + return ret; +} + +/* Chained IRQ handler for IPU error interrupt */ +static void ipu_irq_err(unsigned int irq, struct irq_desc *desc) +{ + struct ipu *ipu = get_irq_data(irq); + u32 status; + int i, line; + + for (i = IPU_IRQ_NR_FN_BANKS; i < IPU_IRQ_NR_BANKS; i++) { + struct ipu_irq_bank *bank = irq_bank + i; + + spin_lock(&bank_lock); + status = ipu_read_reg(ipu, bank->status); + /* + * Don't think we have to clear all interrupts here, they will + * be acked by ->handle_irq() (handle_level_irq). However, we + * might want to clear unhandled interrupts after the loop... + */ + status &= ipu_read_reg(ipu, bank->control); + spin_unlock(&bank_lock); + while ((line = ffs(status))) { + struct ipu_irq_map *map; + + line--; + status &= ~(1UL << line); + + spin_lock(&bank_lock); + map = src2map(32 * i + line); + if (map) + irq = map->irq; + spin_unlock(&bank_lock); + + if (!map) { + pr_err("IPU: Interrupt on unmapped source %u bank %d\n", + line, i); + continue; + } + generic_handle_irq(irq); + } + } +} + +/* Chained IRQ handler for IPU function interrupt */ +static void ipu_irq_fn(unsigned int irq, struct irq_desc *desc) +{ + struct ipu *ipu = get_irq_data(irq); + u32 status; + int i, line; + + for (i = 0; i < IPU_IRQ_NR_FN_BANKS; i++) { + struct ipu_irq_bank *bank = irq_bank + i; + + spin_lock(&bank_lock); + status = ipu_read_reg(ipu, bank->status); + /* Not clearing all interrupts, see above */ + status &= ipu_read_reg(ipu, bank->control); + spin_unlock(&bank_lock); + while ((line = ffs(status))) { + struct ipu_irq_map *map; + + line--; + status &= ~(1UL << line); + + spin_lock(&bank_lock); + map = src2map(32 * i + line); + if (map) + irq = map->irq; + spin_unlock(&bank_lock); + + if (!map) { + pr_err("IPU: Interrupt on unmapped source %u bank %d\n", + line, i); + continue; + } + generic_handle_irq(irq); + } + } +} + +static struct irq_chip ipu_irq_chip = { + .name = "ipu_irq", + .ack = ipu_irq_ack, + .mask = ipu_irq_mask, + .unmask = ipu_irq_unmask, +}; + +/* Install the IRQ handler */ +int ipu_irq_attach_irq(struct ipu *ipu, struct platform_device *dev) +{ + struct ipu_platform_data *pdata = dev->dev.platform_data; + unsigned int irq, irq_base, i; + + irq_base = pdata->irq_base; + + for (i = 0; i < IPU_IRQ_NR_BANKS; i++) + irq_bank[i].ipu = ipu; + + for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) { + int ret; + + irq = irq_base + i; + ret = set_irq_chip(irq, &ipu_irq_chip); + if (ret < 0) + return ret; + ret = set_irq_chip_data(irq, irq_map + i); + if (ret < 0) + return ret; + irq_map[i].ipu = ipu; + irq_map[i].irq = irq; + irq_map[i].source = -EINVAL; + set_irq_handler(irq, handle_level_irq); +#ifdef CONFIG_ARM + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); +#endif + } + + set_irq_data(ipu->irq_fn, ipu); + set_irq_chained_handler(ipu->irq_fn, ipu_irq_fn); + + set_irq_data(ipu->irq_err, ipu); + set_irq_chained_handler(ipu->irq_err, ipu_irq_err); + + return 0; +} + +void ipu_irq_detach_irq(struct ipu *ipu, struct platform_device *dev) +{ + struct ipu_platform_data *pdata = dev->dev.platform_data; + unsigned int irq, irq_base; + + irq_base = pdata->irq_base; + + set_irq_chained_handler(ipu->irq_fn, NULL); + set_irq_data(ipu->irq_fn, NULL); + + set_irq_chained_handler(ipu->irq_err, NULL); + set_irq_data(ipu->irq_err, NULL); + + for (irq = irq_base; irq < irq_base + CONFIG_MX3_IPU_IRQS; irq++) { +#ifdef CONFIG_ARM + set_irq_flags(irq, 0); +#endif + set_irq_chip(irq, NULL); + set_irq_chip_data(irq, NULL); + } +} -- cgit v1.2.3 From 70b9986ca4baaf6deb6f0e01d50f72457579adea Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Wed, 14 Jan 2009 06:43:48 +0000 Subject: bnx2x: Free IRQ Error check could result with not freeing the IRQ Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 7c533797c064..ce98ecf8cb1c 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -6684,6 +6684,9 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode) (DRV_PULSE_ALWAYS_ALIVE | bp->fw_drv_pulse_wr_seq)); bnx2x_stats_handle(bp, STATS_EVENT_STOP); + /* Release IRQs */ + bnx2x_free_irq(bp); + /* Wait until tx fast path tasks complete */ for_each_queue(bp, i) { struct bnx2x_fastpath *fp = &bp->fp[i]; @@ -6711,9 +6714,6 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode) /* Give HW time to discard old tx messages */ msleep(1); - /* Release IRQs */ - bnx2x_free_irq(bp); - if (CHIP_IS_E1(bp)) { struct mac_configuration_cmd *config = bnx2x_sp(bp, mcast_config); -- cgit v1.2.3 From 693fc0d14334859430733ab902adac182fdd8153 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Wed, 14 Jan 2009 06:43:52 +0000 Subject: bnx2x: Handling probe failures Failures in the probe not handled correctly - separate the flow to handle different failures Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index ce98ecf8cb1c..911067586a4a 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -10269,17 +10269,15 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, return rc; } - rc = register_netdev(dev); - if (rc) { - dev_err(&pdev->dev, "Cannot register net device\n"); - goto init_one_exit; - } - pci_set_drvdata(pdev, dev); rc = bnx2x_init_bp(bp); + if (rc) + goto init_one_exit; + + rc = register_netdev(dev); if (rc) { - unregister_netdev(dev); + dev_err(&pdev->dev, "Cannot register net device\n"); goto init_one_exit; } -- cgit v1.2.3 From b4661739c67acd15a02f8e112f8cc52d24b609ed Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Wed, 14 Jan 2009 06:43:56 +0000 Subject: bnx2x: Potential race after iSCSI boot The lock was release too soon. Make sure the HW is marked as locked until the boot driver was unloaded from FW perspective Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 911067586a4a..70fc61033ddf 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -6874,10 +6874,6 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp) */ bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); val = REG_RD(bp, DORQ_REG_NORM_CID_OFST); - if (val == 0x7) - REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0); - bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); - if (val == 0x7) { u32 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS; /* save our func */ @@ -6885,6 +6881,9 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp) u32 swap_en; u32 swap_val; + /* clear the UNDI indication */ + REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0); + BNX2X_DEV_INFO("UNDI is active! reset device\n"); /* try unload UNDI on port 0 */ @@ -6910,6 +6909,9 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp) bnx2x_fw_command(bp, reset_code); } + /* now it's safe to release the lock */ + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); + REG_WR(bp, (BP_PORT(bp) ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0), 0x1000); @@ -6954,7 +6956,9 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp) bp->fw_seq = (SHMEM_RD(bp, func_mb[bp->func].drv_mb_header) & DRV_MSG_SEQ_NUMBER_MASK); - } + + } else + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); } } -- cgit v1.2.3 From af2464011f0954785687071b298f066f6cbb1c84 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Wed, 14 Jan 2009 06:43:59 +0000 Subject: bnx2x: Wrong HDR offset in CAM Has a negative side effect when sending MAC update with no content (as done in the self-test) Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 70fc61033ddf..8f8271d76db6 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -6144,7 +6144,7 @@ static void bnx2x_set_mac_addr_e1(struct bnx2x *bp, int set) * multicast 64-127:port0 128-191:port1 */ config->hdr.length_6b = 2; - config->hdr.offset = port ? 31 : 0; + config->hdr.offset = port ? 32 : 0; config->hdr.client_id = BP_CL_ID(bp); config->hdr.reserved1 = 0; @@ -8910,7 +8910,10 @@ static int bnx2x_test_intr(struct bnx2x *bp) return -ENODEV; config->hdr.length_6b = 0; - config->hdr.offset = 0; + if (CHIP_IS_E1(bp)) + config->hdr.offset = (BP_PORT(bp) ? 32 : 0); + else + config->hdr.offset = BP_FUNC(bp); config->hdr.client_id = BP_CL_ID(bp); config->hdr.reserved1 = 0; @@ -9863,7 +9866,7 @@ static void bnx2x_set_rx_mode(struct net_device *dev) for (; i < old; i++) { if (CAM_IS_INVALID(config-> config_table[i])) { - i--; /* already invalidated */ + /* already invalidated */ break; } /* invalidate */ -- cgit v1.2.3 From 5a40e08e666e8caa1227333de41fd1e2cd84d4f5 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Wed, 14 Jan 2009 06:44:04 +0000 Subject: bnx2x: Read chip ID Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 8f8271d76db6..7ee6a211f9ba 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -6975,7 +6975,7 @@ static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp) id |= ((val & 0xf) << 12); val = REG_RD(bp, MISC_REG_CHIP_METAL); id |= ((val & 0xff) << 4); - REG_RD(bp, MISC_REG_BOND_ID); + val = REG_RD(bp, MISC_REG_BOND_ID); id |= (val & 0xf); bp->common.chip_id = id; bp->link_params.chip_id = bp->common.chip_id; -- cgit v1.2.3 From 2add3acb11a26cc14b54669433ae6ace6406cbf2 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Wed, 14 Jan 2009 06:44:07 +0000 Subject: bnx2x: Block nvram access when the device is inactive Don't dump eeprom when bnx2x adapter is down. Running ethtool -e causes an eeh without it when the device is down Signed-off-by: Paul Larson Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 7ee6a211f9ba..ca5090c3341e 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -8107,6 +8107,9 @@ static int bnx2x_get_eeprom(struct net_device *dev, struct bnx2x *bp = netdev_priv(dev); int rc; + if (!netif_running(dev)) + return -EAGAIN; + DP(BNX2X_MSG_NVM, "ethtool_eeprom: cmd %d\n" DP_LEVEL " magic 0x%x offset 0x%x (%d) len 0x%x (%d)\n", eeprom->cmd, eeprom->magic, eeprom->offset, eeprom->offset, -- cgit v1.2.3 From 632da4d66324b5baf947a048dd1f1e9093b6dd90 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Wed, 14 Jan 2009 06:44:10 +0000 Subject: bnx2x: Overstepping array bounds If the page size is > 8KB this violation happens Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index ca5090c3341e..2e00da6ab172 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -9427,6 +9427,7 @@ static inline u32 bnx2x_xmit_type(struct bnx2x *bp, struct sk_buff *skb) return rc; } +#if (MAX_SKB_FRAGS >= MAX_FETCH_BD - 3) /* check if packet requires linearization (packet is too fragmented) */ static int bnx2x_pkt_req_lin(struct bnx2x *bp, struct sk_buff *skb, u32 xmit_type) @@ -9504,6 +9505,7 @@ exit_lbl: return to_copy; } +#endif /* called with netif_tx_lock * bnx2x_tx_int() runs without netif_tx_lock unless it needs to call @@ -9544,6 +9546,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) skb->ip_summed, skb->protocol, ipv6_hdr(skb)->nexthdr, ip_hdr(skb)->protocol, skb_shinfo(skb)->gso_type, xmit_type); +#if (MAX_SKB_FRAGS >= MAX_FETCH_BD - 3) /* First, check if we need to linearize the skb (due to FW restrictions) */ if (bnx2x_pkt_req_lin(bp, skb, xmit_type)) { @@ -9556,6 +9559,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_OK; } } +#endif /* Please read carefully. First we use one BD which we mark as start, -- cgit v1.2.3 From 6c55c3cdc86881383075a933594748b30dd0054b Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Wed, 14 Jan 2009 06:44:13 +0000 Subject: bnx2x: 1G-10G toggling race The HW should be configured so fast toggling between 1G and 10G will not be missed. Make sure that the HW is re-configured in full Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_link.c | 43 ++++++++++++++++++++++++++++++++----------- 1 file changed, 32 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c index fefa6ab13064..d9e1cfcd06dd 100644 --- a/drivers/net/bnx2x_link.c +++ b/drivers/net/bnx2x_link.c @@ -317,6 +317,9 @@ static u8 bnx2x_emac_enable(struct link_params *params, val &= ~0x810; EMAC_WR(bp, EMAC_REG_EMAC_MODE, val); + /* enable emac */ + REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 1); + /* enable emac for jumbo packets */ EMAC_WR(bp, EMAC_REG_EMAC_RX_MTU_SIZE, (EMAC_RX_MTU_SIZE_JUMBO_ENA | @@ -1609,7 +1612,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params, u32 gp_status) { struct bnx2x *bp = params->bp; - + u16 new_line_speed; u8 rc = 0; vars->link_status = 0; @@ -1629,7 +1632,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params, switch (gp_status & GP_STATUS_SPEED_MASK) { case GP_STATUS_10M: - vars->line_speed = SPEED_10; + new_line_speed = SPEED_10; if (vars->duplex == DUPLEX_FULL) vars->link_status |= LINK_10TFD; else @@ -1637,7 +1640,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params, break; case GP_STATUS_100M: - vars->line_speed = SPEED_100; + new_line_speed = SPEED_100; if (vars->duplex == DUPLEX_FULL) vars->link_status |= LINK_100TXFD; else @@ -1646,7 +1649,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params, case GP_STATUS_1G: case GP_STATUS_1G_KX: - vars->line_speed = SPEED_1000; + new_line_speed = SPEED_1000; if (vars->duplex == DUPLEX_FULL) vars->link_status |= LINK_1000TFD; else @@ -1654,7 +1657,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params, break; case GP_STATUS_2_5G: - vars->line_speed = SPEED_2500; + new_line_speed = SPEED_2500; if (vars->duplex == DUPLEX_FULL) vars->link_status |= LINK_2500TFD; else @@ -1671,32 +1674,32 @@ static u8 bnx2x_link_settings_status(struct link_params *params, case GP_STATUS_10G_KX4: case GP_STATUS_10G_HIG: case GP_STATUS_10G_CX4: - vars->line_speed = SPEED_10000; + new_line_speed = SPEED_10000; vars->link_status |= LINK_10GTFD; break; case GP_STATUS_12G_HIG: - vars->line_speed = SPEED_12000; + new_line_speed = SPEED_12000; vars->link_status |= LINK_12GTFD; break; case GP_STATUS_12_5G: - vars->line_speed = SPEED_12500; + new_line_speed = SPEED_12500; vars->link_status |= LINK_12_5GTFD; break; case GP_STATUS_13G: - vars->line_speed = SPEED_13000; + new_line_speed = SPEED_13000; vars->link_status |= LINK_13GTFD; break; case GP_STATUS_15G: - vars->line_speed = SPEED_15000; + new_line_speed = SPEED_15000; vars->link_status |= LINK_15GTFD; break; case GP_STATUS_16G: - vars->line_speed = SPEED_16000; + new_line_speed = SPEED_16000; vars->link_status |= LINK_16GTFD; break; @@ -1708,6 +1711,15 @@ static u8 bnx2x_link_settings_status(struct link_params *params, break; } + /* Upon link speed change set the NIG into drain mode. + Comes to deals with possible FIFO glitch due to clk change + when speed is decreased without link down indicator */ + if (new_line_speed != vars->line_speed) { + REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + + params->port*4, 0); + msleep(1); + } + vars->line_speed = new_line_speed; vars->link_status |= LINK_STATUS_SERDES_LINK; if ((params->req_line_speed == SPEED_AUTO_NEG) && @@ -4194,6 +4206,11 @@ static u8 bnx2x_update_link_down(struct link_params *params, /* activate nig drain */ REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1); + /* disable emac */ + REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0); + + msleep(10); + /* reset BigMac */ bnx2x_bmac_rx_disable(bp, params->port); REG_WR(bp, GRCBASE_MISC + @@ -4238,6 +4255,7 @@ static u8 bnx2x_update_link_up(struct link_params *params, /* update shared memory */ bnx2x_update_mng(params, vars->link_status); + msleep(20); return rc; } /* This function should called upon link interrupt */ @@ -4276,6 +4294,9 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars) REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68), REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68)); + /* disable emac */ + REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0); + ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); /* Check external link change only for non-direct */ -- cgit v1.2.3 From 3858276b7198074bf3570470463808627f0c9e31 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Wed, 14 Jan 2009 06:44:16 +0000 Subject: bnx2x: Prevent self test loopback failures Setting loopback requires time to take effect Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_link.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c index d9e1cfcd06dd..4ce107c125d1 100644 --- a/drivers/net/bnx2x_link.c +++ b/drivers/net/bnx2x_link.c @@ -3583,7 +3583,7 @@ static void bnx2x_set_xgxs_loopback(struct link_params *params, (MDIO_REG_BANK_CL73_IEEEB0 + (MDIO_CL73_IEEEB0_CL73_AN_CONTROL & 0xf)), 0x6041); - + msleep(200); /* set aer mmd back */ bnx2x_set_aer_mmd(params, vars); -- cgit v1.2.3 From 44722d1d216c9dd4536de5f88fe8320b07e68a96 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Wed, 14 Jan 2009 06:44:21 +0000 Subject: bnx2x: Legacy speeds autoneg failures 10M/100M autoneg was not establishing link. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_link.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c index 4ce107c125d1..2fd6be0cca13 100644 --- a/drivers/net/bnx2x_link.c +++ b/drivers/net/bnx2x_link.c @@ -3882,9 +3882,15 @@ static u8 bnx2x_link_initialize(struct link_params *params, } if (vars->phy_flags & PHY_XGXS_FLAG) { - if (params->req_line_speed && + if ((params->req_line_speed && ((params->req_line_speed == SPEED_100) || - (params->req_line_speed == SPEED_10))) { + (params->req_line_speed == SPEED_10))) || + (!params->req_line_speed && + (params->speed_cap_mask >= + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) && + (params->speed_cap_mask < + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) + )) { vars->phy_flags |= PHY_SGMII_FLAG; } else { vars->phy_flags &= ~PHY_SGMII_FLAG; -- cgit v1.2.3 From 16b311cc29806bb968746c1a752a087b32841af9 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Wed, 14 Jan 2009 06:44:24 +0000 Subject: bnx2x: Handling PHY FW load failure If the default PHY version (0x4321) is read - the PHY FW load failed Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_link.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c index 2fd6be0cca13..b4527a4a60e3 100644 --- a/drivers/net/bnx2x_link.c +++ b/drivers/net/bnx2x_link.c @@ -4404,10 +4404,11 @@ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, u32 shmem_base) ext_phy_addr[port], MDIO_PMA_DEVAD, MDIO_PMA_REG_ROM_VER1, &fw_ver1); - if (fw_ver1 == 0) { + if (fw_ver1 == 0 || fw_ver1 == 0x4321) { DP(NETIF_MSG_LINK, - "bnx2x_8073_common_init_phy port %x " - "fw Download failed\n", port); + "bnx2x_8073_common_init_phy port %x:" + "Download failed. fw version = 0x%x\n", + port, fw_ver1); return -EINVAL; } -- cgit v1.2.3 From e47d7e6eb841c1850f0e69b95ae6cf3c86881f53 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Wed, 14 Jan 2009 06:44:28 +0000 Subject: bnx2x: Driver description update The Driver supports the 57711 and 57711E as well but the description was out of date Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 2e00da6ab172..dc05e37c581d 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -69,7 +69,7 @@ static char version[] __devinitdata = DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; MODULE_AUTHOR("Eliezer Tamir"); -MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver"); +MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710/57711/57711E Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_MODULE_VERSION); -- cgit v1.2.3 From 237907c1ded8a1a447cea7c4f97ab853e8b46052 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Wed, 14 Jan 2009 06:42:44 +0000 Subject: bnx2x: Barriers for the compiler To make sure no swapping are made by the compiler, changed HAS_WORK to inline functions and added all the necessary barriers Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x.h | 9 +-------- drivers/net/bnx2x_main.c | 37 ++++++++++++++++++++++++++----------- 2 files changed, 27 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index 6fcccef4cf3d..18f60aa3efdd 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -271,14 +271,7 @@ struct bnx2x_fastpath { #define bnx2x_fp(bp, nr, var) (bp->fp[nr].var) -#define BNX2X_HAS_TX_WORK(fp) \ - ((fp->tx_pkt_prod != le16_to_cpu(*fp->tx_cons_sb)) || \ - (fp->tx_pkt_prod != fp->tx_pkt_cons)) - -#define BNX2X_HAS_RX_WORK(fp) \ - (fp->rx_comp_cons != rx_cons_sb) - -#define BNX2X_HAS_WORK(fp) (BNX2X_HAS_RX_WORK(fp) || BNX2X_HAS_TX_WORK(fp)) +#define BNX2X_HAS_WORK(fp) (bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp)) /* MC hsi */ diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index dc05e37c581d..3236527477a3 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -733,6 +733,17 @@ static u16 bnx2x_ack_int(struct bnx2x *bp) * fast path service functions */ +static inline int bnx2x_has_tx_work(struct bnx2x_fastpath *fp) +{ + u16 tx_cons_sb; + + /* Tell compiler that status block fields can change */ + barrier(); + tx_cons_sb = le16_to_cpu(*fp->tx_cons_sb); + return ((fp->tx_pkt_prod != tx_cons_sb) || + (fp->tx_pkt_prod != fp->tx_pkt_cons)); +} + /* free skb in the packet ring at pos idx * return idx of last bd freed */ @@ -6693,7 +6704,7 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode) cnt = 1000; smp_rmb(); - while (BNX2X_HAS_TX_WORK(fp)) { + while (bnx2x_has_tx_work(fp)) { bnx2x_tx_int(fp, 1000); if (!cnt) { @@ -9281,6 +9292,18 @@ static int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state) return 0; } +static inline int bnx2x_has_rx_work(struct bnx2x_fastpath *fp) +{ + u16 rx_cons_sb; + + /* Tell compiler that status block fields can change */ + barrier(); + rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb); + if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT) + rx_cons_sb++; + return (fp->rx_comp_cons != rx_cons_sb); +} + /* * net_device service functions */ @@ -9291,7 +9314,6 @@ static int bnx2x_poll(struct napi_struct *napi, int budget) napi); struct bnx2x *bp = fp->bp; int work_done = 0; - u16 rx_cons_sb; #ifdef BNX2X_STOP_ON_ERROR if (unlikely(bp->panic)) @@ -9304,19 +9326,12 @@ static int bnx2x_poll(struct napi_struct *napi, int budget) bnx2x_update_fpsb_idx(fp); - if (BNX2X_HAS_TX_WORK(fp)) + if (bnx2x_has_tx_work(fp)) bnx2x_tx_int(fp, budget); - rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb); - if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT) - rx_cons_sb++; - if (BNX2X_HAS_RX_WORK(fp)) + if (bnx2x_has_rx_work(fp)) work_done = bnx2x_rx_int(fp, budget); - rmb(); /* BNX2X_HAS_WORK() reads the status block */ - rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb); - if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT) - rx_cons_sb++; /* must not complete if we consumed full budget */ if ((work_done < budget) && !BNX2X_HAS_WORK(fp)) { -- cgit v1.2.3 From d05c26ce690e867aabfc7d708d481e0f86f23496 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Sat, 17 Jan 2009 23:26:13 -0800 Subject: bnx2x: Version update Updating the version and the year of updated files Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x.h | 2 +- drivers/net/bnx2x_link.c | 2 +- drivers/net/bnx2x_main.c | 6 +++--- drivers/net/bnx2x_reg.h | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index 18f60aa3efdd..15a5cf0f676b 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -1,6 +1,6 @@ /* bnx2x.h: Broadcom Everest network driver. * - * Copyright (c) 2007-2008 Broadcom Corporation + * Copyright (c) 2007-2009 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c index b4527a4a60e3..aea26b4dc453 100644 --- a/drivers/net/bnx2x_link.c +++ b/drivers/net/bnx2x_link.c @@ -1,4 +1,4 @@ -/* Copyright 2008 Broadcom Corporation +/* Copyright 2008-2009 Broadcom Corporation * * Unless you and Broadcom execute a separate written software license * agreement governing use of this software, this software is licensed to you diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 3236527477a3..074374ff93f3 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -1,6 +1,6 @@ /* bnx2x_main.c: Broadcom Everest network driver. * - * Copyright (c) 2007-2008 Broadcom Corporation + * Copyright (c) 2007-2009 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -57,8 +57,8 @@ #include "bnx2x.h" #include "bnx2x_init.h" -#define DRV_MODULE_VERSION "1.45.23" -#define DRV_MODULE_RELDATE "2008/11/03" +#define DRV_MODULE_VERSION "1.45.24" +#define DRV_MODULE_RELDATE "2009/01/14" #define BNX2X_BC_VER 0x040200 /* Time in jiffies before concluding the transmitter is hung */ diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h index a67b0c358ae4..d084e5fc4b51 100644 --- a/drivers/net/bnx2x_reg.h +++ b/drivers/net/bnx2x_reg.h @@ -1,6 +1,6 @@ /* bnx2x_reg.h: Broadcom Everest network driver. * - * Copyright (c) 2007-2008 Broadcom Corporation + * Copyright (c) 2007-2009 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by -- cgit v1.2.3 From 39eddb4c3970e9aadbc87b8a7cab7b4fefff077f Mon Sep 17 00:00:00 2001 From: Richard Röjfors Date: Sun, 18 Jan 2009 21:57:35 -0800 Subject: macb: avoid lockup when TGO during underrun MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In rare cases when an underrun occur, all macb buffers where consumed and the netif_queue was stopped infinitely. This happens then the TGO (transfer ongoing) bit in the TSR is set (and UND). It seems like clening up after the underrun makes the driver and the macb hardware end up in an inconsistent state. The result of this is that in the following calls to macb_tx no TX buffers are released -> the netif_queue was stopped, and never woken up again. The solution is to disable the transmitter, if TGO is set, before clening up after the underrun, and re-enable the transmitter when the cleaning up is done. Signed-off-by: Richard Röjfors Signed-off-by: David S. Miller --- drivers/net/macb.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/net/macb.c b/drivers/net/macb.c index a04da4ecaa88..f6c4936e2fa8 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -321,6 +321,10 @@ static void macb_tx(struct macb *bp) printk(KERN_ERR "%s: TX underrun, resetting buffers\n", bp->dev->name); + /* Transfer ongoing, disable transmitter, to avoid confusion */ + if (status & MACB_BIT(TGO)) + macb_writel(bp, NCR, macb_readl(bp, NCR) & ~MACB_BIT(TE)); + head = bp->tx_head; /*Mark all the buffer as used to avoid sending a lost buffer*/ @@ -343,6 +347,10 @@ static void macb_tx(struct macb *bp) } bp->tx_head = bp->tx_tail = 0; + + /* Enable the transmitter again */ + if (status & MACB_BIT(TGO)) + macb_writel(bp, NCR, macb_readl(bp, NCR) | MACB_BIT(TE)); } if (!(status & MACB_BIT(COMP))) -- cgit v1.2.3 From eed087e367591fc08490d7c6c2779b4b72c8f20c Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Sun, 18 Jan 2009 22:01:32 -0800 Subject: cxgb3: Fix LRO misalignment The lro manager's frag_align_pad setting was missing, leading to misaligned access to the skb passed up to the stack. Tested-by: Rick Jones Signed-off-by: Divy Le Ray Signed-off-by: David S. Miller --- drivers/net/cxgb3/sge.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c index 14f9fb3e8795..379a1324db4e 100644 --- a/drivers/net/cxgb3/sge.c +++ b/drivers/net/cxgb3/sge.c @@ -2104,6 +2104,7 @@ static void init_lro_mgr(struct sge_qset *qs, struct net_lro_mgr *lro_mgr) { lro_mgr->dev = qs->netdev; lro_mgr->features = LRO_F_NAPI; + lro_mgr->frag_align_pad = NET_IP_ALIGN; lro_mgr->ip_summed = CHECKSUM_UNNECESSARY; lro_mgr->ip_summed_aggr = CHECKSUM_UNNECESSARY; lro_mgr->max_desc = T3_MAX_LRO_SES; -- cgit v1.2.3 From 6a2fe9834e578590f4a2fbe18a574465ab0e127c Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Thu, 15 Jan 2009 12:29:55 +0000 Subject: korina: fix loop back of receive descriptors After the last loop iteration, i has the value RC32434_NUM_RDS and therefore leads to an index overflow when used afterwards to address the last element. This is yet another another bug introduced when rewriting parts of the driver for upstream preparation, as the original driver used 'RC32434_NUM_RDS - 1' instead. Signed-off-by: Phil Sutter Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/korina.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/korina.c b/drivers/net/korina.c index 1d6e48e13366..67fbdf40aceb 100644 --- a/drivers/net/korina.c +++ b/drivers/net/korina.c @@ -769,11 +769,12 @@ static void korina_alloc_ring(struct net_device *dev) lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[i+1]); } - /* loop back */ - lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[0]); - lp->rx_next_done = 0; + /* loop back receive descriptors, so the last + * descriptor points to the first one */ + lp->rd_ring[i - 1].link = CPHYSADDR(&lp->rd_ring[0]); + lp->rd_ring[i - 1].control |= DMA_DESC_COD; - lp->rd_ring[i].control |= DMA_DESC_COD; + lp->rx_next_done = 0; lp->rx_chain_head = 0; lp->rx_chain_tail = 0; lp->rx_chain_status = desc_empty; -- cgit v1.2.3 From 63a66c6c0debcae70183849121734fd4809e1dde Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Thu, 15 Jan 2009 12:29:56 +0000 Subject: korina: adjust headroom for new skb's also This is copy and paste from the original driver. As skb_reserve() is also called within korina_alloc_ring() when initially allocating the receive descriptors, the same should be done when allocating new space after passing an skb to upper layers. Signed-off-by: Phil Sutter Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/korina.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/korina.c b/drivers/net/korina.c index 67fbdf40aceb..60ae7bfb1d9b 100644 --- a/drivers/net/korina.c +++ b/drivers/net/korina.c @@ -416,6 +416,9 @@ static int korina_rx(struct net_device *dev, int limit) if (devcs & ETH_RX_MP) dev->stats.multicast++; + /* 16 bit align */ + skb_reserve(skb_new, 2); + lp->rx_skb[lp->rx_next_done] = skb_new; } -- cgit v1.2.3 From e85bf47e6ded66ea138f692fe149c00a4998afe8 Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Thu, 15 Jan 2009 12:29:57 +0000 Subject: korina: drop leftover assignment As the assigned value is being overwritten shortly after, it can be dropped and so the whole variable definition moved to the start of the function. Signed-off-by: Phil Sutter Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/korina.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/korina.c b/drivers/net/korina.c index 60ae7bfb1d9b..75010cac76ac 100644 --- a/drivers/net/korina.c +++ b/drivers/net/korina.c @@ -743,6 +743,7 @@ static struct ethtool_ops netdev_ethtool_ops = { static void korina_alloc_ring(struct net_device *dev) { struct korina_private *lp = netdev_priv(dev); + struct sk_buff *skb; int i; /* Initialize the transmit descriptors */ @@ -758,8 +759,6 @@ static void korina_alloc_ring(struct net_device *dev) /* Initialize the receive descriptors */ for (i = 0; i < KORINA_NUM_RDS; i++) { - struct sk_buff *skb = lp->rx_skb[i]; - skb = dev_alloc_skb(KORINA_RBSIZE + 2); if (!skb) break; -- cgit v1.2.3 From 15005a320473b8d3676b878deb29bbe738ef9027 Mon Sep 17 00:00:00 2001 From: Don Skidmore Date: Mon, 19 Jan 2009 16:54:13 -0800 Subject: ixgbe: fix dca issue with relaxed ordering turned on The is an issue where setting Relaxed Ordering (RO) bit (in a PCI-E write transaction) on 82598 causing the chipset to drop DCA hints. This patch forces RO not to be set for descriptors as well as payload. This will only be in effect while DCA is enabled and no performance difference was noticed in testing. Signed-off-by: Don Skidmore Signed-off-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 3 +++ drivers/net/ixgbe/ixgbe_type.h | 3 +++ 2 files changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index acef3c65cd2c..92d9b17a081a 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -318,6 +318,9 @@ static void ixgbe_update_rx_dca(struct ixgbe_adapter *adapter, rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu); rxctrl |= IXGBE_DCA_RXCTRL_DESC_DCA_EN; rxctrl |= IXGBE_DCA_RXCTRL_HEAD_DCA_EN; + rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_RRO_EN); + rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN | + IXGBE_DCA_RXCTRL_DESC_HSRO_EN); IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_RXCTRL(q), rxctrl); rx_ring->cpu = cpu; } diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h index 83a11ff9ffd1..f011c57c9205 100644 --- a/drivers/net/ixgbe/ixgbe_type.h +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -404,6 +404,9 @@ #define IXGBE_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */ #define IXGBE_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* DCA Rx Desc header enable */ #define IXGBE_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* DCA Rx Desc payload enable */ +#define IXGBE_DCA_RXCTRL_DESC_RRO_EN (1 << 9) /* DCA Rx rd Desc Relax Order */ +#define IXGBE_DCA_RXCTRL_DESC_WRO_EN (1 << 13) /* DCA Rx wr Desc Relax Order */ +#define IXGBE_DCA_RXCTRL_DESC_HSRO_EN (1 << 15) /* DCA Rx Split Header RO */ #define IXGBE_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */ #define IXGBE_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */ -- cgit v1.2.3 From 068c89b014ebd27b1c09c3c772e9d982988e7786 Mon Sep 17 00:00:00 2001 From: Don Skidmore Date: Mon, 19 Jan 2009 16:54:36 -0800 Subject: ixgbe: fix tag stripping for VLAN ID 0 Register VLAN ID 0 so that frames with VLAN ID 0 are received and get their tag stripped when ixgbe is not in DCB mode. VLAN ID 0 means that the frame is 'priority tagged' only - it is not a VLAN, but the priority value is the tag in valid. The functions ixgbe_vlan_rx_register() and ixgbe_vlan_rx_kill_vid() were moved up a couple functions to correct compiling issues with this change. Signed-off-by: Don Skidmore Signed-off-by: Peter P Waskiewicz Jr Signed-off-by: Eric W Multanen Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 53 +++++++++++++++++++++--------------------- 1 file changed, 27 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 92d9b17a081a..bf36737e2ec7 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -1744,6 +1744,32 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum); } +static void ixgbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + + /* add VID to filter table */ + hw->mac.ops.set_vfta(&adapter->hw, vid, 0, true); +} + +static void ixgbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + + if (!test_bit(__IXGBE_DOWN, &adapter->state)) + ixgbe_irq_disable(adapter); + + vlan_group_set_device(adapter->vlgrp, vid, NULL); + + if (!test_bit(__IXGBE_DOWN, &adapter->state)) + ixgbe_irq_enable(adapter); + + /* remove VID from filter table */ + hw->mac.ops.set_vfta(&adapter->hw, vid, 0, false); +} + static void ixgbe_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) { @@ -1763,6 +1789,7 @@ static void ixgbe_vlan_rx_register(struct net_device *netdev, ctrl |= IXGBE_VLNCTRL_VME; ctrl &= ~IXGBE_VLNCTRL_CFIEN; IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl); + ixgbe_vlan_rx_add_vid(netdev, 0); if (grp) { /* enable VLAN tag insert/strip */ @@ -1776,32 +1803,6 @@ static void ixgbe_vlan_rx_register(struct net_device *netdev, ixgbe_irq_enable(adapter); } -static void ixgbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - struct ixgbe_hw *hw = &adapter->hw; - - /* add VID to filter table */ - hw->mac.ops.set_vfta(&adapter->hw, vid, 0, true); -} - -static void ixgbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - struct ixgbe_hw *hw = &adapter->hw; - - if (!test_bit(__IXGBE_DOWN, &adapter->state)) - ixgbe_irq_disable(adapter); - - vlan_group_set_device(adapter->vlgrp, vid, NULL); - - if (!test_bit(__IXGBE_DOWN, &adapter->state)) - ixgbe_irq_enable(adapter); - - /* remove VID from filter table */ - hw->mac.ops.set_vfta(&adapter->hw, vid, 0, false); -} - static void ixgbe_restore_vlan(struct ixgbe_adapter *adapter) { ixgbe_vlan_rx_register(adapter->netdev, adapter->vlgrp); -- cgit v1.2.3 From 1da100bb47ef32cb43bb6a365f64183898f830b5 Mon Sep 17 00:00:00 2001 From: Peter P Waskiewicz Jr Date: Mon, 19 Jan 2009 16:55:03 -0800 Subject: ixgbe: Fix usage of netif_*_all_queues() with netif_carrier_{off|on}() netif_carrier_off() is sufficient to stop Tx into the driver. Stopping the Tx queues is redundant and unnecessary. By the same token, netif_carrier_on() will be sufficient to re-enable Tx, so waking the queues is unnecessary. Signed-off-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index bf36737e2ec7..d2f4d5f508b7 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -2078,6 +2078,9 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter) ixgbe_irq_enable(adapter); + /* enable transmits */ + netif_tx_start_all_queues(netdev); + /* bring the link up in the watchdog, this could race with our first * link up interrupt but shouldn't be a problem */ adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE; @@ -3479,7 +3482,6 @@ static void ixgbe_watchdog_task(struct work_struct *work) (FLOW_TX ? "TX" : "None")))); netif_carrier_on(netdev); - netif_tx_wake_all_queues(netdev); } else { /* Force detection of hung controller */ adapter->detect_tx_hung = true; @@ -3491,7 +3493,6 @@ static void ixgbe_watchdog_task(struct work_struct *work) printk(KERN_INFO "ixgbe: %s NIC Link is Down\n", netdev->name); netif_carrier_off(netdev); - netif_tx_stop_all_queues(netdev); } } @@ -4222,7 +4223,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, } netif_carrier_off(netdev); - netif_tx_stop_all_queues(netdev); strcpy(netdev->name, "eth%d"); err = register_netdev(netdev); -- cgit v1.2.3 From 9e9fd12dc0679643c191fc9795a3021807e77de4 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Mon, 19 Jan 2009 16:57:45 -0800 Subject: tg3: Fix firmware loading This patch modifies how the tg3 driver handles device firmware. The patch starts by consolidating David Woodhouse's earlier patch under the same name. Specifically, the patch moves the request_firmware call into a separate tg3_request_firmware() function and calls that function from tg3_open() rather than tg3_init_one(). The patch then goes on to limit the number of devices that will make request_firmware calls. The original firmware patch unnecessarily requested TSO firmware for devices that did not need it. This patch reduces the set of devices making TSO firmware patches to approximately the following device set : 5703, 5704, and 5705. Finally, the patch reduces the effects of a request_firmware() failure. For those devices that are requesting TSO firmware, the driver will turn off the TSO capability. If TSO firmware becomes available at a later time, the device can be closed and then opened again to reacquire the TSO capability. Signed-off-by: Matt Carlson Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 81 ++++++++++++++++++++++++++++++++++--------------------- drivers/net/tg3.h | 1 + 2 files changed, 51 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 5e2dbaee125b..8b3f84685387 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -7535,11 +7535,58 @@ static int tg3_test_msi(struct tg3 *tp) return err; } +static int tg3_request_firmware(struct tg3 *tp) +{ + const __be32 *fw_data; + + if (request_firmware(&tp->fw, tp->fw_needed, &tp->pdev->dev)) { + printk(KERN_ERR "%s: Failed to load firmware \"%s\"\n", + tp->dev->name, tp->fw_needed); + return -ENOENT; + } + + fw_data = (void *)tp->fw->data; + + /* Firmware blob starts with version numbers, followed by + * start address and _full_ length including BSS sections + * (which must be longer than the actual data, of course + */ + + tp->fw_len = be32_to_cpu(fw_data[2]); /* includes bss */ + if (tp->fw_len < (tp->fw->size - 12)) { + printk(KERN_ERR "%s: bogus length %d in \"%s\"\n", + tp->dev->name, tp->fw_len, tp->fw_needed); + release_firmware(tp->fw); + tp->fw = NULL; + return -EINVAL; + } + + /* We no longer need firmware; we have it. */ + tp->fw_needed = NULL; + return 0; +} + static int tg3_open(struct net_device *dev) { struct tg3 *tp = netdev_priv(dev); int err; + if (tp->fw_needed) { + err = tg3_request_firmware(tp); + if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0) { + if (err) + return err; + } else if (err) { + printk(KERN_WARNING "%s: TSO capability disabled.\n", + tp->dev->name); + tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE; + } else if (!(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE)) { + printk(KERN_NOTICE "%s: TSO capability restored.\n", + tp->dev->name); + tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE; + } + } + netif_carrier_off(tp->dev); err = tg3_set_power_state(tp, PCI_D0); @@ -12934,7 +12981,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, struct net_device *dev; struct tg3 *tp; int err, pm_cap; - const char *fw_name = NULL; char str[40]; u64 dma_mask, persist_dma_mask; @@ -13091,7 +13137,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, tg3_init_bufmgr_config(tp); if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0) - fw_name = FIRMWARE_TG3; + tp->fw_needed = FIRMWARE_TG3; if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) { tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE; @@ -13104,37 +13150,10 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE; } else { tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE | TG3_FLG2_TSO_BUG; - } - if (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) { if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) - fw_name = FIRMWARE_TG3TSO5; + tp->fw_needed = FIRMWARE_TG3TSO5; else - fw_name = FIRMWARE_TG3TSO; - } - - if (fw_name) { - const __be32 *fw_data; - - err = request_firmware(&tp->fw, fw_name, &tp->pdev->dev); - if (err) { - printk(KERN_ERR "tg3: Failed to load firmware \"%s\"\n", - fw_name); - goto err_out_iounmap; - } - - fw_data = (void *)tp->fw->data; - - /* Firmware blob starts with version numbers, followed by - start address and _full_ length including BSS sections - (which must be longer than the actual data, of course */ - - tp->fw_len = be32_to_cpu(fw_data[2]); /* includes bss */ - if (tp->fw_len < (tp->fw->size - 12)) { - printk(KERN_ERR "tg3: bogus length %d in \"%s\"\n", - tp->fw_len, fw_name); - err = -EINVAL; - goto err_out_fw; - } + tp->fw_needed = FIRMWARE_TG3TSO; } /* TSO is on by default on chips that support hardware TSO. diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index ae5da603c6af..508def3e077f 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -2764,6 +2764,7 @@ struct tg3 { struct ethtool_coalesce coal; /* firmware info */ + const char *fw_needed; const struct firmware *fw; u32 fw_len; /* includes BSS */ }; -- cgit v1.2.3 From e0c6ef9388b58f297937fc9651331941d1579b25 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 19 Jan 2009 17:16:00 -0800 Subject: Revert "mv643xx_eth: use longer DMA bursts". This reverts commit cd4ccf76bfd2c36d351e68be7e6a597268f98a1a. On the Pegasos board, we can't do DMA burst that are longer than one cache line. For now, go back to using 32 byte DMA bursts for all mv643xx_eth platforms -- we can switch the ARM-based platforms back to doing long 128 byte bursts in the next development cycle. Signed-off-by: Lennert Buytenhek Reported-by: Alan Curry Reported-by: Gabriel Paubert Signed-off-by: David S. Miller --- drivers/net/mv643xx_eth.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 7253a499d9c8..e2aa468d40f1 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -136,21 +136,23 @@ static char mv643xx_eth_driver_version[] = "1.4"; /* * SDMA configuration register. */ +#define RX_BURST_SIZE_4_64BIT (2 << 1) #define RX_BURST_SIZE_16_64BIT (4 << 1) #define BLM_RX_NO_SWAP (1 << 4) #define BLM_TX_NO_SWAP (1 << 5) +#define TX_BURST_SIZE_4_64BIT (2 << 22) #define TX_BURST_SIZE_16_64BIT (4 << 22) #if defined(__BIG_ENDIAN) #define PORT_SDMA_CONFIG_DEFAULT_VALUE \ - (RX_BURST_SIZE_16_64BIT | \ - TX_BURST_SIZE_16_64BIT) + (RX_BURST_SIZE_4_64BIT | \ + TX_BURST_SIZE_4_64BIT) #elif defined(__LITTLE_ENDIAN) #define PORT_SDMA_CONFIG_DEFAULT_VALUE \ - (RX_BURST_SIZE_16_64BIT | \ - BLM_RX_NO_SWAP | \ - BLM_TX_NO_SWAP | \ - TX_BURST_SIZE_16_64BIT) + (RX_BURST_SIZE_4_64BIT | \ + BLM_RX_NO_SWAP | \ + BLM_TX_NO_SWAP | \ + TX_BURST_SIZE_4_64BIT) #else #error One of __BIG_ENDIAN or __LITTLE_ENDIAN must be defined #endif -- cgit v1.2.3 From 2b448334a255d34401562229f467ffd95d8ed6ef Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 19 Jan 2009 17:17:18 -0800 Subject: mv643xx_eth: fix multicast filter programming Commit 66e63ffbc04706568d8789cbb00eaa8ddbcae648 ("mv643xx_eth: implement ->set_rx_mode()") cleaned up mv643xx_eth's multicast filter programming, but broke it as well. The non-special multicast filter table (for multicast addresses that are not of the form 01:00:5e:00:00:xx) consists of 256 hash table buckets organised as 64 32-bit words, where the 'accept' bits are in the LSB of each byte, so in bits 24 16 8 0 of each 32-bit word. The old code got this right, but the referenced commit broke this by using bits 3 2 1 0 instead. This commit fixes this up. Signed-off-by: Lennert Buytenhek Signed-off-by: David S. Miller --- drivers/net/mv643xx_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index e2aa468d40f1..8c6979a26d61 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -1596,7 +1596,7 @@ oom: entry = addr_crc(a); } - table[entry >> 2] |= 1 << (entry & 3); + table[entry >> 2] |= 1 << (8 * (entry & 3)); } for (i = 0; i < 0x100; i += 4) { -- cgit v1.2.3 From fe65e704534de5d0661ebc3466a2b9018945f694 Mon Sep 17 00:00:00 2001 From: Gabriel Paubert Date: Mon, 19 Jan 2009 17:18:09 -0800 Subject: mv643xx_eth: prevent interrupt storm on ifconfig down Contrary to what the docs say, the 'extended interrupt cause' bit in the interrupt cause register (bit 1) appears to not be maskable on at least some of the mv643xx_eth platforms, making writing zeroes to the interrupt mask register but not the extended interrupt mask register insufficient to stop interrupts from occuring. Therefore, also write zeroes to the extended interrupt mask register when shutting down the port. This fixes the interrupt storm seen on the Pegasos board when shutting down the interface. Signed-off-by: Lennert Buytenhek Signed-off-by: David S. Miller --- drivers/net/mv643xx_eth.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 8c6979a26d61..5f31bbb614af 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -2212,6 +2212,7 @@ static int mv643xx_eth_stop(struct net_device *dev) struct mv643xx_eth_private *mp = netdev_priv(dev); int i; + wrlp(mp, INT_MASK_EXT, 0x00000000); wrlp(mp, INT_MASK, 0x00000000); rdlp(mp, INT_MASK); -- cgit v1.2.3 From f4895b8bc83a22a36446c4aee277e1750fcc6a18 Mon Sep 17 00:00:00 2001 From: Inaky Perez-Gonzalez Date: Mon, 19 Jan 2009 13:19:30 +0000 Subject: wimax/i2400m: error paths that need to free an skb should use kfree_skb() Roel Kluin reported a bug in two error paths where skbs were wrongly being freed using kfree(). He provided a fix where it was replaced to kfree_skb(), as it should be. However, in i2400mu_rx(), the error path was missing returning an indication of the failure. Changed to reset rx_skb to NULL and return it to the caller, i2400mu_rxd(). It will be treated as a transient error and just ignore the packet. Depending on the buffering conditions inside the device, the data packet might be dropped or the device will signal the host again for data-ready-to-read and the host will retry. Signed-off-by: Inaky Perez-Gonzalez Signed-off-by: David S. Miller --- drivers/net/wimax/i2400m/control.c | 2 +- drivers/net/wimax/i2400m/usb-rx.c | 9 ++++++--- 2 files changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wimax/i2400m/control.c b/drivers/net/wimax/i2400m/control.c index d3d37fed6893..15d9f51b292c 100644 --- a/drivers/net/wimax/i2400m/control.c +++ b/drivers/net/wimax/i2400m/control.c @@ -609,7 +609,7 @@ void i2400m_msg_to_dev_cancel_wait(struct i2400m *i2400m, int code) spin_lock_irqsave(&i2400m->rx_lock, flags); ack_skb = i2400m->ack_skb; if (ack_skb && !IS_ERR(ack_skb)) - kfree(ack_skb); + kfree_skb(ack_skb); i2400m->ack_skb = ERR_PTR(code); spin_unlock_irqrestore(&i2400m->rx_lock, flags); } diff --git a/drivers/net/wimax/i2400m/usb-rx.c b/drivers/net/wimax/i2400m/usb-rx.c index 074cc1f89853..a314799967cf 100644 --- a/drivers/net/wimax/i2400m/usb-rx.c +++ b/drivers/net/wimax/i2400m/usb-rx.c @@ -184,6 +184,8 @@ void i2400mu_rx_size_maybe_shrink(struct i2400mu *i2400mu) * NOTE: this function might realloc the skb (if it is too small), * so always update with the one returned. * ERR_PTR() is < 0 on error. + * Will return NULL if it cannot reallocate -- this can be + * considered a transient retryable error. */ static struct sk_buff *i2400mu_rx(struct i2400mu *i2400mu, struct sk_buff *rx_skb) @@ -243,8 +245,8 @@ retry: if (printk_ratelimit()) dev_err(dev, "RX: Can't reallocate skb to %d; " "RX dropped\n", rx_size); - kfree(rx_skb); - result = 0; + kfree_skb(rx_skb); + rx_skb = NULL; goto out; /* drop it...*/ } kfree_skb(rx_skb); @@ -344,7 +346,8 @@ int i2400mu_rxd(void *_i2400mu) if (IS_ERR(rx_skb)) goto out; atomic_dec(&i2400mu->rx_pending_count); - if (rx_skb->len == 0) { /* some ignorable condition */ + if (rx_skb == NULL || rx_skb->len == 0) { + /* some "ignorable" condition */ kfree_skb(rx_skb); continue; } -- cgit v1.2.3 From e3fd553468738e0342cbd82a63ede00c983a0eb4 Mon Sep 17 00:00:00 2001 From: Brice Goglin Date: Sat, 17 Jan 2009 08:27:19 +0000 Subject: myri10ge: don't forget pci_disable_device() Don't forget to call pci_disable_device() in myri10ge_remove() and when myri10ge_probe() fails. By the way, update the copyright years. Signed-off-by: Brice Goglin Signed-off-by: David S. Miller --- drivers/net/myri10ge/myri10ge.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 6bb71b687f7b..e9c1296b267e 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -1,7 +1,7 @@ /************************************************************************* * myri10ge.c: Myricom Myri-10G Ethernet driver. * - * Copyright (C) 2005 - 2007 Myricom, Inc. + * Copyright (C) 2005 - 2009 Myricom, Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -75,7 +75,7 @@ #include "myri10ge_mcp.h" #include "myri10ge_mcp_gen_header.h" -#define MYRI10GE_VERSION_STR "1.4.4-1.398" +#define MYRI10GE_VERSION_STR "1.4.4-1.401" MODULE_DESCRIPTION("Myricom 10G driver (10GbE)"); MODULE_AUTHOR("Maintainer: help@myri.com"); @@ -3786,7 +3786,7 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (status != 0) { dev_err(&pdev->dev, "Error %d writing PCI_EXP_DEVCTL\n", status); - goto abort_with_netdev; + goto abort_with_enabled; } pci_set_master(pdev); @@ -3801,13 +3801,13 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } if (status != 0) { dev_err(&pdev->dev, "Error %d setting DMA mask\n", status); - goto abort_with_netdev; + goto abort_with_enabled; } (void)pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); mgp->cmd = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->cmd), &mgp->cmd_bus, GFP_KERNEL); if (mgp->cmd == NULL) - goto abort_with_netdev; + goto abort_with_enabled; mgp->board_span = pci_resource_len(pdev, 0); mgp->iomem_base = pci_resource_start(pdev, 0); @@ -3943,8 +3943,10 @@ abort_with_mtrr: dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd), mgp->cmd, mgp->cmd_bus); -abort_with_netdev: +abort_with_enabled: + pci_disable_device(pdev); +abort_with_netdev: free_netdev(netdev); return status; } @@ -3990,6 +3992,7 @@ static void myri10ge_remove(struct pci_dev *pdev) mgp->cmd, mgp->cmd_bus); free_netdev(netdev); + pci_disable_device(pdev); pci_set_drvdata(pdev, NULL); } -- cgit v1.2.3 From 0d1cfd20cc5f785d5345d249d4b6a6f84b29e6a6 Mon Sep 17 00:00:00 2001 From: roel kluin Date: Sat, 17 Jan 2009 11:14:31 +0000 Subject: via-velocity: fix hot spin while(--j >= 0) keeps spinning when j is unsigned: Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- drivers/net/via-velocity.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index a75f91dc3153..c5691fdb7079 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -1302,7 +1302,7 @@ static void velocity_free_rd_ring(struct velocity_info *vptr) static int velocity_init_td_ring(struct velocity_info *vptr) { dma_addr_t curr; - unsigned int j; + int j; /* Init the TD ring entries */ for (j = 0; j < vptr->tx.numq; j++) { -- cgit v1.2.3 From 7143f7a1a3603002e4ef3719fa92e8dd6e607099 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 9 Jan 2009 22:27:42 -0800 Subject: driver core: Convert '/' to '!' in dev_set_name() Commit 3ada8b7e ("block: struct device - replace bus_id with dev_name(), dev_set_name()") deleted the code in register_disk() that changed a '/' to a '!' in the device name when registering a disk, but dev_set_name() does not perform this conversion. This leads to amusing problems with disks that have '/' in their names: for example a failure to boot with the root partition on a cciss device, even though the kernel says it knows about the root device: VFS: Cannot open root device "cciss/c0d0p6" or unknown-block(0,0) Please append a correct "root=" boot option; here are the available partitions: 6800 71652960 cciss/c0d0 driver: cciss 6802 1 cciss/c0d0p2 6805 2931831 cciss/c0d0p5 6806 34354908 cciss/c0d0p6 6810 71652960 cciss/c0d1 driver: cciss Fix this by adding code to change '/' to '!' in dev_set_name() to handle this until dev_set_name() is converted to use kobject_set_name(). Signed-off-by: Roland Dreier Acked-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/base/core.c b/drivers/base/core.c index 8079afca4972..55e530942ab0 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -777,10 +777,16 @@ static void device_remove_class_symlinks(struct device *dev) int dev_set_name(struct device *dev, const char *fmt, ...) { va_list vargs; + char *s; va_start(vargs, fmt); vsnprintf(dev->bus_id, sizeof(dev->bus_id), fmt, vargs); va_end(vargs); + + /* ewww... some of these buggers have / in the name... */ + while ((s = strchr(dev->bus_id, '/'))) + *s = '!'; + return 0; } EXPORT_SYMBOL_GPL(dev_set_name); -- cgit v1.2.3 From fd88cac90587a456eb944bf794634229553c11b9 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 9 Jan 2009 16:32:08 +0900 Subject: serial: sh-sci: Fix up SH7720/SH7721 SCI build. Missing definitions for PORT_xxx defs. Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index 38c600c0dbbf..c0f4823ab78b 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -32,7 +32,9 @@ #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) # define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */ -#define SCIF_ORER 0x0200 /* overrun error bit */ +# define PORT_PTCR 0xA405011EUL +# define PORT_PVCR 0xA4050122UL +# define SCIF_ORER 0x0200 /* overrun error bit */ #elif defined(CONFIG_SH_RTS7751R2D) # define SCSPTR1 0xFFE0001C /* 8 bit SCIF */ # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ -- cgit v1.2.3 From f686359e0da5ae71459ee045646a5f508f9ff6d8 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 20 Jan 2009 12:18:22 +0900 Subject: sh: fix sh-sci / early printk build on sh7723 This patch adds the SCSPTR register to the sh-sci driver in the case of sh7723 to make sure early printk builds properly. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.h | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index c0f4823ab78b..3599828b9766 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -395,6 +395,7 @@ SCIx_FNS(SCSCR, 0x08, 16, 0x08, 16) SCIx_FNS(SCxTDR, 0x20, 8, 0x0c, 8) SCIx_FNS(SCxSR, 0x14, 16, 0x10, 16) SCIx_FNS(SCxRDR, 0x24, 8, 0x14, 8) +SCIx_FNS(SCSPTR, 0, 0, 0, 0) SCIF_FNS(SCTDSR, 0x0c, 8) SCIF_FNS(SCFER, 0x10, 16) SCIF_FNS(SCFCR, 0x18, 16) -- cgit v1.2.3 From 86528da229a448577a8401a17c295883640d336c Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 21 Jan 2009 10:32:34 -0700 Subject: i.MX31: framebuffer driver This is a framebuffer driver for i.MX31 SoCs. It only supports synchronous displays, vertical panning supported, no overlay support. Acked-by: Sascha Hauer Signed-off-by: Guennadi Liakhovetski Signed-off-by: Dan Williams --- arch/arm/plat-mxc/include/mach/mx3fb.h | 38 + drivers/video/Kconfig | 12 + drivers/video/Makefile | 1 + drivers/video/mx3fb.c | 1555 ++++++++++++++++++++++++++++++++ 4 files changed, 1606 insertions(+) create mode 100644 arch/arm/plat-mxc/include/mach/mx3fb.h create mode 100644 drivers/video/mx3fb.c (limited to 'drivers') diff --git a/arch/arm/plat-mxc/include/mach/mx3fb.h b/arch/arm/plat-mxc/include/mach/mx3fb.h new file mode 100644 index 000000000000..e391a76ca87d --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/mx3fb.h @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2008 + * Guennadi Liakhovetski, DENX Software Engineering, + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MX3FB_H__ +#define __ASM_ARCH_MX3FB_H__ + +#include +#include + +/* Proprietary FB_SYNC_ flags */ +#define FB_SYNC_OE_ACT_HIGH 0x80000000 +#define FB_SYNC_CLK_INVERT 0x40000000 +#define FB_SYNC_DATA_INVERT 0x20000000 +#define FB_SYNC_CLK_IDLE_EN 0x10000000 +#define FB_SYNC_SHARP_MODE 0x08000000 +#define FB_SYNC_SWAP_RGB 0x04000000 +#define FB_SYNC_CLK_SEL_EN 0x02000000 + +/** + * struct mx3fb_platform_data - mx3fb platform data + * + * @dma_dev: pointer to the dma-device, used for dma-slave connection + * @mode: pointer to a platform-provided per mxc_register_fb() videomode + */ +struct mx3fb_platform_data { + struct device *dma_dev; + const char *name; + const struct fb_videomode *mode; + int num_modes; +}; + +#endif diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 6372f8b17b45..c94f71980c1b 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -2123,6 +2123,18 @@ config FB_PRE_INIT_FB Select this option if display contents should be inherited as set by the bootloader. +config FB_MX3 + tristate "MX3 Framebuffer support" + depends on FB && MX3_IPU + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + default y + help + This is a framebuffer device for the i.MX31 LCD Controller. So + far only synchronous displays are supported. If you plan to use + an LCD display with your i.MX31 system, say Y here. + source "drivers/video/omap/Kconfig" source "drivers/video/backlight/Kconfig" diff --git a/drivers/video/Makefile b/drivers/video/Makefile index e39e33e797da..a9c641c956c4 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -132,6 +132,7 @@ obj-$(CONFIG_FB_VGA16) += vga16fb.o obj-$(CONFIG_FB_OF) += offb.o obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-lq043fb.o obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o +obj-$(CONFIG_FB_MX3) += mx3fb.o # the test framebuffer is last obj-$(CONFIG_FB_VIRTUAL) += vfb.o diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c new file mode 100644 index 000000000000..8a75d05f4334 --- /dev/null +++ b/drivers/video/mx3fb.c @@ -0,0 +1,1555 @@ +/* + * Copyright (C) 2008 + * Guennadi Liakhovetski, DENX Software Engineering, + * + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +#define MX3FB_NAME "mx3_sdc_fb" + +#define MX3FB_REG_OFFSET 0xB4 + +/* SDC Registers */ +#define SDC_COM_CONF (0xB4 - MX3FB_REG_OFFSET) +#define SDC_GW_CTRL (0xB8 - MX3FB_REG_OFFSET) +#define SDC_FG_POS (0xBC - MX3FB_REG_OFFSET) +#define SDC_BG_POS (0xC0 - MX3FB_REG_OFFSET) +#define SDC_CUR_POS (0xC4 - MX3FB_REG_OFFSET) +#define SDC_PWM_CTRL (0xC8 - MX3FB_REG_OFFSET) +#define SDC_CUR_MAP (0xCC - MX3FB_REG_OFFSET) +#define SDC_HOR_CONF (0xD0 - MX3FB_REG_OFFSET) +#define SDC_VER_CONF (0xD4 - MX3FB_REG_OFFSET) +#define SDC_SHARP_CONF_1 (0xD8 - MX3FB_REG_OFFSET) +#define SDC_SHARP_CONF_2 (0xDC - MX3FB_REG_OFFSET) + +/* Register bits */ +#define SDC_COM_TFT_COLOR 0x00000001UL +#define SDC_COM_FG_EN 0x00000010UL +#define SDC_COM_GWSEL 0x00000020UL +#define SDC_COM_GLB_A 0x00000040UL +#define SDC_COM_KEY_COLOR_G 0x00000080UL +#define SDC_COM_BG_EN 0x00000200UL +#define SDC_COM_SHARP 0x00001000UL + +#define SDC_V_SYNC_WIDTH_L 0x00000001UL + +/* Display Interface registers */ +#define DI_DISP_IF_CONF (0x0124 - MX3FB_REG_OFFSET) +#define DI_DISP_SIG_POL (0x0128 - MX3FB_REG_OFFSET) +#define DI_SER_DISP1_CONF (0x012C - MX3FB_REG_OFFSET) +#define DI_SER_DISP2_CONF (0x0130 - MX3FB_REG_OFFSET) +#define DI_HSP_CLK_PER (0x0134 - MX3FB_REG_OFFSET) +#define DI_DISP0_TIME_CONF_1 (0x0138 - MX3FB_REG_OFFSET) +#define DI_DISP0_TIME_CONF_2 (0x013C - MX3FB_REG_OFFSET) +#define DI_DISP0_TIME_CONF_3 (0x0140 - MX3FB_REG_OFFSET) +#define DI_DISP1_TIME_CONF_1 (0x0144 - MX3FB_REG_OFFSET) +#define DI_DISP1_TIME_CONF_2 (0x0148 - MX3FB_REG_OFFSET) +#define DI_DISP1_TIME_CONF_3 (0x014C - MX3FB_REG_OFFSET) +#define DI_DISP2_TIME_CONF_1 (0x0150 - MX3FB_REG_OFFSET) +#define DI_DISP2_TIME_CONF_2 (0x0154 - MX3FB_REG_OFFSET) +#define DI_DISP2_TIME_CONF_3 (0x0158 - MX3FB_REG_OFFSET) +#define DI_DISP3_TIME_CONF (0x015C - MX3FB_REG_OFFSET) +#define DI_DISP0_DB0_MAP (0x0160 - MX3FB_REG_OFFSET) +#define DI_DISP0_DB1_MAP (0x0164 - MX3FB_REG_OFFSET) +#define DI_DISP0_DB2_MAP (0x0168 - MX3FB_REG_OFFSET) +#define DI_DISP0_CB0_MAP (0x016C - MX3FB_REG_OFFSET) +#define DI_DISP0_CB1_MAP (0x0170 - MX3FB_REG_OFFSET) +#define DI_DISP0_CB2_MAP (0x0174 - MX3FB_REG_OFFSET) +#define DI_DISP1_DB0_MAP (0x0178 - MX3FB_REG_OFFSET) +#define DI_DISP1_DB1_MAP (0x017C - MX3FB_REG_OFFSET) +#define DI_DISP1_DB2_MAP (0x0180 - MX3FB_REG_OFFSET) +#define DI_DISP1_CB0_MAP (0x0184 - MX3FB_REG_OFFSET) +#define DI_DISP1_CB1_MAP (0x0188 - MX3FB_REG_OFFSET) +#define DI_DISP1_CB2_MAP (0x018C - MX3FB_REG_OFFSET) +#define DI_DISP2_DB0_MAP (0x0190 - MX3FB_REG_OFFSET) +#define DI_DISP2_DB1_MAP (0x0194 - MX3FB_REG_OFFSET) +#define DI_DISP2_DB2_MAP (0x0198 - MX3FB_REG_OFFSET) +#define DI_DISP2_CB0_MAP (0x019C - MX3FB_REG_OFFSET) +#define DI_DISP2_CB1_MAP (0x01A0 - MX3FB_REG_OFFSET) +#define DI_DISP2_CB2_MAP (0x01A4 - MX3FB_REG_OFFSET) +#define DI_DISP3_B0_MAP (0x01A8 - MX3FB_REG_OFFSET) +#define DI_DISP3_B1_MAP (0x01AC - MX3FB_REG_OFFSET) +#define DI_DISP3_B2_MAP (0x01B0 - MX3FB_REG_OFFSET) +#define DI_DISP_ACC_CC (0x01B4 - MX3FB_REG_OFFSET) +#define DI_DISP_LLA_CONF (0x01B8 - MX3FB_REG_OFFSET) +#define DI_DISP_LLA_DATA (0x01BC - MX3FB_REG_OFFSET) + +/* DI_DISP_SIG_POL bits */ +#define DI_D3_VSYNC_POL_SHIFT 28 +#define DI_D3_HSYNC_POL_SHIFT 27 +#define DI_D3_DRDY_SHARP_POL_SHIFT 26 +#define DI_D3_CLK_POL_SHIFT 25 +#define DI_D3_DATA_POL_SHIFT 24 + +/* DI_DISP_IF_CONF bits */ +#define DI_D3_CLK_IDLE_SHIFT 26 +#define DI_D3_CLK_SEL_SHIFT 25 +#define DI_D3_DATAMSK_SHIFT 24 + +enum ipu_panel { + IPU_PANEL_SHARP_TFT, + IPU_PANEL_TFT, +}; + +struct ipu_di_signal_cfg { + unsigned datamask_en:1; + unsigned clksel_en:1; + unsigned clkidle_en:1; + unsigned data_pol:1; /* true = inverted */ + unsigned clk_pol:1; /* true = rising edge */ + unsigned enable_pol:1; + unsigned Hsync_pol:1; /* true = active high */ + unsigned Vsync_pol:1; +}; + +static const struct fb_videomode mx3fb_modedb[] = { + { + /* 240x320 @ 60 Hz */ + .name = "Sharp-QVGA", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 185925, + .left_margin = 9, + .right_margin = 16, + .upper_margin = 7, + .lower_margin = 9, + .hsync_len = 1, + .vsync_len = 1, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | + FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT | + FB_SYNC_CLK_IDLE_EN, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, { + /* 240x33 @ 60 Hz */ + .name = "Sharp-CLI", + .refresh = 60, + .xres = 240, + .yres = 33, + .pixclock = 185925, + .left_margin = 9, + .right_margin = 16, + .upper_margin = 7, + .lower_margin = 9 + 287, + .hsync_len = 1, + .vsync_len = 1, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | + FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT | + FB_SYNC_CLK_IDLE_EN, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, { + /* 640x480 @ 60 Hz */ + .name = "NEC-VGA", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 38255, + .left_margin = 144, + .right_margin = 0, + .upper_margin = 34, + .lower_margin = 40, + .hsync_len = 1, + .vsync_len = 1, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, { + /* NTSC TV output */ + .name = "TV-NTSC", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 37538, + .left_margin = 38, + .right_margin = 858 - 640 - 38 - 3, + .upper_margin = 36, + .lower_margin = 518 - 480 - 36 - 1, + .hsync_len = 3, + .vsync_len = 1, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, { + /* PAL TV output */ + .name = "TV-PAL", + .refresh = 50, + .xres = 640, + .yres = 480, + .pixclock = 37538, + .left_margin = 38, + .right_margin = 960 - 640 - 38 - 32, + .upper_margin = 32, + .lower_margin = 555 - 480 - 32 - 3, + .hsync_len = 32, + .vsync_len = 3, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, { + /* TV output VGA mode, 640x480 @ 65 Hz */ + .name = "TV-VGA", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 40574, + .left_margin = 35, + .right_margin = 45, + .upper_margin = 9, + .lower_margin = 1, + .hsync_len = 46, + .vsync_len = 5, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, +}; + +struct mx3fb_data { + struct fb_info *fbi; + int backlight_level; + void __iomem *reg_base; + spinlock_t lock; + struct device *dev; + + uint32_t h_start_width; + uint32_t v_start_width; +}; + +struct dma_chan_request { + struct mx3fb_data *mx3fb; + enum ipu_channel id; +}; + +/* MX3 specific framebuffer information. */ +struct mx3fb_info { + int blank; + enum ipu_channel ipu_ch; + uint32_t cur_ipu_buf; + + u32 pseudo_palette[16]; + + struct completion flip_cmpl; + struct mutex mutex; /* Protects fb-ops */ + struct mx3fb_data *mx3fb; + struct idmac_channel *idmac_channel; + struct dma_async_tx_descriptor *txd; + dma_cookie_t cookie; + struct scatterlist sg[2]; + + u32 sync; /* preserve var->sync flags */ +}; + +static void mx3fb_dma_done(void *); + +/* Used fb-mode and bpp. Can be set on kernel command line, therefore file-static. */ +static const char *fb_mode; +static unsigned long default_bpp = 16; + +static u32 mx3fb_read_reg(struct mx3fb_data *mx3fb, unsigned long reg) +{ + return __raw_readl(mx3fb->reg_base + reg); +} + +static void mx3fb_write_reg(struct mx3fb_data *mx3fb, u32 value, unsigned long reg) +{ + __raw_writel(value, mx3fb->reg_base + reg); +} + +static const uint32_t di_mappings[] = { + 0x1600AAAA, 0x00E05555, 0x00070000, 3, /* RGB888 */ + 0x0005000F, 0x000B000F, 0x0011000F, 1, /* RGB666 */ + 0x0011000F, 0x000B000F, 0x0005000F, 1, /* BGR666 */ + 0x0004003F, 0x000A000F, 0x000F003F, 1 /* RGB565 */ +}; + +static void sdc_fb_init(struct mx3fb_info *fbi) +{ + struct mx3fb_data *mx3fb = fbi->mx3fb; + uint32_t reg; + + reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); + + mx3fb_write_reg(mx3fb, reg | SDC_COM_BG_EN, SDC_COM_CONF); +} + +/* Returns enabled flag before uninit */ +static uint32_t sdc_fb_uninit(struct mx3fb_info *fbi) +{ + struct mx3fb_data *mx3fb = fbi->mx3fb; + uint32_t reg; + + reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); + + mx3fb_write_reg(mx3fb, reg & ~SDC_COM_BG_EN, SDC_COM_CONF); + + return reg & SDC_COM_BG_EN; +} + +static void sdc_enable_channel(struct mx3fb_info *mx3_fbi) +{ + struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; + struct idmac_channel *ichan = mx3_fbi->idmac_channel; + struct dma_chan *dma_chan = &ichan->dma_chan; + unsigned long flags; + dma_cookie_t cookie; + + dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi, + to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg); + + /* This enables the channel */ + if (mx3_fbi->cookie < 0) { + mx3_fbi->txd = dma_chan->device->device_prep_slave_sg(dma_chan, + &mx3_fbi->sg[0], 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT); + if (!mx3_fbi->txd) { + dev_err(mx3fb->dev, "Cannot allocate descriptor on %d\n", + dma_chan->chan_id); + return; + } + + mx3_fbi->txd->callback_param = mx3_fbi->txd; + mx3_fbi->txd->callback = mx3fb_dma_done; + + cookie = mx3_fbi->txd->tx_submit(mx3_fbi->txd); + dev_dbg(mx3fb->dev, "%d: Submit %p #%d [%c]\n", __LINE__, + mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+'); + } else { + if (!mx3_fbi->txd || !mx3_fbi->txd->tx_submit) { + dev_err(mx3fb->dev, "Cannot enable channel %d\n", + dma_chan->chan_id); + return; + } + + /* Just re-activate the same buffer */ + dma_async_issue_pending(dma_chan); + cookie = mx3_fbi->cookie; + dev_dbg(mx3fb->dev, "%d: Re-submit %p #%d [%c]\n", __LINE__, + mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+'); + } + + if (cookie >= 0) { + spin_lock_irqsave(&mx3fb->lock, flags); + sdc_fb_init(mx3_fbi); + mx3_fbi->cookie = cookie; + spin_unlock_irqrestore(&mx3fb->lock, flags); + } + + /* + * Attention! Without this msleep the channel keeps generating + * interrupts. Next sdc_set_brightness() is going to be called + * from mx3fb_blank(). + */ + msleep(2); +} + +static void sdc_disable_channel(struct mx3fb_info *mx3_fbi) +{ + struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; + uint32_t enabled; + unsigned long flags; + + spin_lock_irqsave(&mx3fb->lock, flags); + + enabled = sdc_fb_uninit(mx3_fbi); + + spin_unlock_irqrestore(&mx3fb->lock, flags); + + mx3_fbi->txd->chan->device->device_terminate_all(mx3_fbi->txd->chan); + mx3_fbi->txd = NULL; + mx3_fbi->cookie = -EINVAL; +} + +/** + * sdc_set_window_pos() - set window position of the respective plane. + * @mx3fb: mx3fb context. + * @channel: IPU DMAC channel ID. + * @x_pos: X coordinate relative to the top left corner to place window at. + * @y_pos: Y coordinate relative to the top left corner to place window at. + * @return: 0 on success or negative error code on failure. + */ +static int sdc_set_window_pos(struct mx3fb_data *mx3fb, enum ipu_channel channel, + int16_t x_pos, int16_t y_pos) +{ + x_pos += mx3fb->h_start_width; + y_pos += mx3fb->v_start_width; + + if (channel != IDMAC_SDC_0) + return -EINVAL; + + mx3fb_write_reg(mx3fb, (x_pos << 16) | y_pos, SDC_BG_POS); + return 0; +} + +/** + * sdc_init_panel() - initialize a synchronous LCD panel. + * @mx3fb: mx3fb context. + * @panel: panel type. + * @pixel_clk: desired pixel clock frequency in Hz. + * @width: width of panel in pixels. + * @height: height of panel in pixels. + * @pixel_fmt: pixel format of buffer as FOURCC ASCII code. + * @h_start_width: number of pixel clocks between the HSYNC signal pulse + * and the start of valid data. + * @h_sync_width: width of the HSYNC signal in units of pixel clocks. + * @h_end_width: number of pixel clocks between the end of valid data + * and the HSYNC signal for next line. + * @v_start_width: number of lines between the VSYNC signal pulse and the + * start of valid data. + * @v_sync_width: width of the VSYNC signal in units of lines + * @v_end_width: number of lines between the end of valid data and the + * VSYNC signal for next frame. + * @sig: bitfield of signal polarities for LCD interface. + * @return: 0 on success or negative error code on failure. + */ +static int sdc_init_panel(struct mx3fb_data *mx3fb, enum ipu_panel panel, + uint32_t pixel_clk, + uint16_t width, uint16_t height, + enum pixel_fmt pixel_fmt, + uint16_t h_start_width, uint16_t h_sync_width, + uint16_t h_end_width, uint16_t v_start_width, + uint16_t v_sync_width, uint16_t v_end_width, + struct ipu_di_signal_cfg sig) +{ + unsigned long lock_flags; + uint32_t reg; + uint32_t old_conf; + uint32_t div; + struct clk *ipu_clk; + + dev_dbg(mx3fb->dev, "panel size = %d x %d", width, height); + + if (v_sync_width == 0 || h_sync_width == 0) + return -EINVAL; + + /* Init panel size and blanking periods */ + reg = ((uint32_t) (h_sync_width - 1) << 26) | + ((uint32_t) (width + h_start_width + h_end_width - 1) << 16); + mx3fb_write_reg(mx3fb, reg, SDC_HOR_CONF); + +#ifdef DEBUG + printk(KERN_CONT " hor_conf %x,", reg); +#endif + + reg = ((uint32_t) (v_sync_width - 1) << 26) | SDC_V_SYNC_WIDTH_L | + ((uint32_t) (height + v_start_width + v_end_width - 1) << 16); + mx3fb_write_reg(mx3fb, reg, SDC_VER_CONF); + +#ifdef DEBUG + printk(KERN_CONT " ver_conf %x\n", reg); +#endif + + mx3fb->h_start_width = h_start_width; + mx3fb->v_start_width = v_start_width; + + switch (panel) { + case IPU_PANEL_SHARP_TFT: + mx3fb_write_reg(mx3fb, 0x00FD0102L, SDC_SHARP_CONF_1); + mx3fb_write_reg(mx3fb, 0x00F500F4L, SDC_SHARP_CONF_2); + mx3fb_write_reg(mx3fb, SDC_COM_SHARP | SDC_COM_TFT_COLOR, SDC_COM_CONF); + break; + case IPU_PANEL_TFT: + mx3fb_write_reg(mx3fb, SDC_COM_TFT_COLOR, SDC_COM_CONF); + break; + default: + return -EINVAL; + } + + /* Init clocking */ + + /* + * Calculate divider: fractional part is 4 bits so simply multiple by + * 24 to get fractional part, as long as we stay under ~250MHz and on + * i.MX31 it (HSP_CLK) is <= 178MHz. Currently 128.267MHz + */ + dev_dbg(mx3fb->dev, "pixel clk = %d\n", pixel_clk); + + ipu_clk = clk_get(mx3fb->dev, "ipu_clk"); + div = clk_get_rate(ipu_clk) * 16 / pixel_clk; + clk_put(ipu_clk); + + if (div < 0x40) { /* Divider less than 4 */ + dev_dbg(mx3fb->dev, + "InitPanel() - Pixel clock divider less than 4\n"); + div = 0x40; + } + + spin_lock_irqsave(&mx3fb->lock, lock_flags); + + /* + * DISP3_IF_CLK_DOWN_WR is half the divider value and 2 fraction bits + * fewer. Subtract 1 extra from DISP3_IF_CLK_DOWN_WR based on timing + * debug. DISP3_IF_CLK_UP_WR is 0 + */ + mx3fb_write_reg(mx3fb, (((div / 8) - 1) << 22) | div, DI_DISP3_TIME_CONF); + + /* DI settings */ + old_conf = mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF) & 0x78FFFFFF; + old_conf |= sig.datamask_en << DI_D3_DATAMSK_SHIFT | + sig.clksel_en << DI_D3_CLK_SEL_SHIFT | + sig.clkidle_en << DI_D3_CLK_IDLE_SHIFT; + mx3fb_write_reg(mx3fb, old_conf, DI_DISP_IF_CONF); + + old_conf = mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL) & 0xE0FFFFFF; + old_conf |= sig.data_pol << DI_D3_DATA_POL_SHIFT | + sig.clk_pol << DI_D3_CLK_POL_SHIFT | + sig.enable_pol << DI_D3_DRDY_SHARP_POL_SHIFT | + sig.Hsync_pol << DI_D3_HSYNC_POL_SHIFT | + sig.Vsync_pol << DI_D3_VSYNC_POL_SHIFT; + mx3fb_write_reg(mx3fb, old_conf, DI_DISP_SIG_POL); + + switch (pixel_fmt) { + case IPU_PIX_FMT_RGB24: + mx3fb_write_reg(mx3fb, di_mappings[0], DI_DISP3_B0_MAP); + mx3fb_write_reg(mx3fb, di_mappings[1], DI_DISP3_B1_MAP); + mx3fb_write_reg(mx3fb, di_mappings[2], DI_DISP3_B2_MAP); + mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | + ((di_mappings[3] - 1) << 12), DI_DISP_ACC_CC); + break; + case IPU_PIX_FMT_RGB666: + mx3fb_write_reg(mx3fb, di_mappings[4], DI_DISP3_B0_MAP); + mx3fb_write_reg(mx3fb, di_mappings[5], DI_DISP3_B1_MAP); + mx3fb_write_reg(mx3fb, di_mappings[6], DI_DISP3_B2_MAP); + mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | + ((di_mappings[7] - 1) << 12), DI_DISP_ACC_CC); + break; + case IPU_PIX_FMT_BGR666: + mx3fb_write_reg(mx3fb, di_mappings[8], DI_DISP3_B0_MAP); + mx3fb_write_reg(mx3fb, di_mappings[9], DI_DISP3_B1_MAP); + mx3fb_write_reg(mx3fb, di_mappings[10], DI_DISP3_B2_MAP); + mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | + ((di_mappings[11] - 1) << 12), DI_DISP_ACC_CC); + break; + default: + mx3fb_write_reg(mx3fb, di_mappings[12], DI_DISP3_B0_MAP); + mx3fb_write_reg(mx3fb, di_mappings[13], DI_DISP3_B1_MAP); + mx3fb_write_reg(mx3fb, di_mappings[14], DI_DISP3_B2_MAP); + mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | + ((di_mappings[15] - 1) << 12), DI_DISP_ACC_CC); + break; + } + + spin_unlock_irqrestore(&mx3fb->lock, lock_flags); + + dev_dbg(mx3fb->dev, "DI_DISP_IF_CONF = 0x%08X\n", + mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF)); + dev_dbg(mx3fb->dev, "DI_DISP_SIG_POL = 0x%08X\n", + mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL)); + dev_dbg(mx3fb->dev, "DI_DISP3_TIME_CONF = 0x%08X\n", + mx3fb_read_reg(mx3fb, DI_DISP3_TIME_CONF)); + + return 0; +} + +/** + * sdc_set_color_key() - set the transparent color key for SDC graphic plane. + * @mx3fb: mx3fb context. + * @channel: IPU DMAC channel ID. + * @enable: boolean to enable or disable color keyl. + * @color_key: 24-bit RGB color to use as transparent color key. + * @return: 0 on success or negative error code on failure. + */ +static int sdc_set_color_key(struct mx3fb_data *mx3fb, enum ipu_channel channel, + bool enable, uint32_t color_key) +{ + uint32_t reg, sdc_conf; + unsigned long lock_flags; + + spin_lock_irqsave(&mx3fb->lock, lock_flags); + + sdc_conf = mx3fb_read_reg(mx3fb, SDC_COM_CONF); + if (channel == IDMAC_SDC_0) + sdc_conf &= ~SDC_COM_GWSEL; + else + sdc_conf |= SDC_COM_GWSEL; + + if (enable) { + reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0xFF000000L; + mx3fb_write_reg(mx3fb, reg | (color_key & 0x00FFFFFFL), + SDC_GW_CTRL); + + sdc_conf |= SDC_COM_KEY_COLOR_G; + } else { + sdc_conf &= ~SDC_COM_KEY_COLOR_G; + } + mx3fb_write_reg(mx3fb, sdc_conf, SDC_COM_CONF); + + spin_unlock_irqrestore(&mx3fb->lock, lock_flags); + + return 0; +} + +/** + * sdc_set_global_alpha() - set global alpha blending modes. + * @mx3fb: mx3fb context. + * @enable: boolean to enable or disable global alpha blending. If disabled, + * per pixel blending is used. + * @alpha: global alpha value. + * @return: 0 on success or negative error code on failure. + */ +static int sdc_set_global_alpha(struct mx3fb_data *mx3fb, bool enable, uint8_t alpha) +{ + uint32_t reg; + unsigned long lock_flags; + + spin_lock_irqsave(&mx3fb->lock, lock_flags); + + if (enable) { + reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0x00FFFFFFL; + mx3fb_write_reg(mx3fb, reg | ((uint32_t) alpha << 24), SDC_GW_CTRL); + + reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); + mx3fb_write_reg(mx3fb, reg | SDC_COM_GLB_A, SDC_COM_CONF); + } else { + reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); + mx3fb_write_reg(mx3fb, reg & ~SDC_COM_GLB_A, SDC_COM_CONF); + } + + spin_unlock_irqrestore(&mx3fb->lock, lock_flags); + + return 0; +} + +static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value) +{ + /* This might be board-specific */ + mx3fb_write_reg(mx3fb, 0x03000000UL | value << 16, SDC_PWM_CTRL); + return; +} + +static uint32_t bpp_to_pixfmt(int bpp) +{ + uint32_t pixfmt = 0; + switch (bpp) { + case 24: + pixfmt = IPU_PIX_FMT_BGR24; + break; + case 32: + pixfmt = IPU_PIX_FMT_BGR32; + break; + case 16: + pixfmt = IPU_PIX_FMT_RGB565; + break; + } + return pixfmt; +} + +static int mx3fb_blank(int blank, struct fb_info *fbi); +static int mx3fb_map_video_memory(struct fb_info *fbi); +static int mx3fb_unmap_video_memory(struct fb_info *fbi); + +/** + * mx3fb_set_fix() - set fixed framebuffer parameters from variable settings. + * @info: framebuffer information pointer + * @return: 0 on success or negative error code on failure. + */ +static int mx3fb_set_fix(struct fb_info *fbi) +{ + struct fb_fix_screeninfo *fix = &fbi->fix; + struct fb_var_screeninfo *var = &fbi->var; + + strncpy(fix->id, "DISP3 BG", 8); + + fix->line_length = var->xres_virtual * var->bits_per_pixel / 8; + + fix->type = FB_TYPE_PACKED_PIXELS; + fix->accel = FB_ACCEL_NONE; + fix->visual = FB_VISUAL_TRUECOLOR; + fix->xpanstep = 1; + fix->ypanstep = 1; + + return 0; +} + +static void mx3fb_dma_done(void *arg) +{ + struct idmac_tx_desc *tx_desc = to_tx_desc(arg); + struct dma_chan *chan = tx_desc->txd.chan; + struct idmac_channel *ichannel = to_idmac_chan(chan); + struct mx3fb_data *mx3fb = ichannel->client; + struct mx3fb_info *mx3_fbi = mx3fb->fbi->par; + + dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq); + + /* We only need one interrupt, it will be re-enabled as needed */ + disable_irq(ichannel->eof_irq); + + complete(&mx3_fbi->flip_cmpl); +} + +/** + * mx3fb_set_par() - set framebuffer parameters and change the operating mode. + * @fbi: framebuffer information pointer. + * @return: 0 on success or negative error code on failure. + */ +static int mx3fb_set_par(struct fb_info *fbi) +{ + u32 mem_len; + struct ipu_di_signal_cfg sig_cfg; + enum ipu_panel mode = IPU_PANEL_TFT; + struct mx3fb_info *mx3_fbi = fbi->par; + struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; + struct idmac_channel *ichan = mx3_fbi->idmac_channel; + struct idmac_video_param *video = &ichan->params.video; + struct scatterlist *sg = mx3_fbi->sg; + size_t screen_size; + + dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+'); + + mutex_lock(&mx3_fbi->mutex); + + /* Total cleanup */ + if (mx3_fbi->txd) + sdc_disable_channel(mx3_fbi); + + mx3fb_set_fix(fbi); + + mem_len = fbi->var.yres_virtual * fbi->fix.line_length; + if (mem_len > fbi->fix.smem_len) { + if (fbi->fix.smem_start) + mx3fb_unmap_video_memory(fbi); + + fbi->fix.smem_len = mem_len; + if (mx3fb_map_video_memory(fbi) < 0) { + mutex_unlock(&mx3_fbi->mutex); + return -ENOMEM; + } + } + + screen_size = fbi->fix.line_length * fbi->var.yres; + + sg_init_table(&sg[0], 1); + sg_init_table(&sg[1], 1); + + sg_dma_address(&sg[0]) = fbi->fix.smem_start; + sg_set_page(&sg[0], virt_to_page(fbi->screen_base), + fbi->fix.smem_len, + offset_in_page(fbi->screen_base)); + + if (mx3_fbi->ipu_ch == IDMAC_SDC_0) { + memset(&sig_cfg, 0, sizeof(sig_cfg)); + if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT) + sig_cfg.Hsync_pol = true; + if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT) + sig_cfg.Vsync_pol = true; + if (fbi->var.sync & FB_SYNC_CLK_INVERT) + sig_cfg.clk_pol = true; + if (fbi->var.sync & FB_SYNC_DATA_INVERT) + sig_cfg.data_pol = true; + if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH) + sig_cfg.enable_pol = true; + if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN) + sig_cfg.clkidle_en = true; + if (fbi->var.sync & FB_SYNC_CLK_SEL_EN) + sig_cfg.clksel_en = true; + if (fbi->var.sync & FB_SYNC_SHARP_MODE) + mode = IPU_PANEL_SHARP_TFT; + + dev_dbg(fbi->device, "pixclock = %ul Hz\n", + (u32) (PICOS2KHZ(fbi->var.pixclock) * 1000UL)); + + if (sdc_init_panel(mx3fb, mode, + (PICOS2KHZ(fbi->var.pixclock)) * 1000UL, + fbi->var.xres, fbi->var.yres, + (fbi->var.sync & FB_SYNC_SWAP_RGB) ? + IPU_PIX_FMT_BGR666 : IPU_PIX_FMT_RGB666, + fbi->var.left_margin, + fbi->var.hsync_len, + fbi->var.right_margin + + fbi->var.hsync_len, + fbi->var.upper_margin, + fbi->var.vsync_len, + fbi->var.lower_margin + + fbi->var.vsync_len, sig_cfg) != 0) { + mutex_unlock(&mx3_fbi->mutex); + dev_err(fbi->device, + "mx3fb: Error initializing panel.\n"); + return -EINVAL; + } + } + + sdc_set_window_pos(mx3fb, mx3_fbi->ipu_ch, 0, 0); + + mx3_fbi->cur_ipu_buf = 0; + + video->out_pixel_fmt = bpp_to_pixfmt(fbi->var.bits_per_pixel); + video->out_width = fbi->var.xres; + video->out_height = fbi->var.yres; + video->out_stride = fbi->var.xres_virtual; + + if (mx3_fbi->blank == FB_BLANK_UNBLANK) + sdc_enable_channel(mx3_fbi); + + mutex_unlock(&mx3_fbi->mutex); + + return 0; +} + +/** + * mx3fb_check_var() - check and adjust framebuffer variable parameters. + * @var: framebuffer variable parameters + * @fbi: framebuffer information pointer + */ +static int mx3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi) +{ + struct mx3fb_info *mx3_fbi = fbi->par; + u32 vtotal; + u32 htotal; + + dev_dbg(fbi->device, "%s\n", __func__); + + if (var->xres_virtual < var->xres) + var->xres_virtual = var->xres; + if (var->yres_virtual < var->yres) + var->yres_virtual = var->yres; + + if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) && + (var->bits_per_pixel != 16)) + var->bits_per_pixel = default_bpp; + + switch (var->bits_per_pixel) { + case 16: + var->red.length = 5; + var->red.offset = 11; + var->red.msb_right = 0; + + var->green.length = 6; + var->green.offset = 5; + var->green.msb_right = 0; + + var->blue.length = 5; + var->blue.offset = 0; + var->blue.msb_right = 0; + + var->transp.length = 0; + var->transp.offset = 0; + var->transp.msb_right = 0; + break; + case 24: + var->red.length = 8; + var->red.offset = 16; + var->red.msb_right = 0; + + var->green.length = 8; + var->green.offset = 8; + var->green.msb_right = 0; + + var->blue.length = 8; + var->blue.offset = 0; + var->blue.msb_right = 0; + + var->transp.length = 0; + var->transp.offset = 0; + var->transp.msb_right = 0; + break; + case 32: + var->red.length = 8; + var->red.offset = 16; + var->red.msb_right = 0; + + var->green.length = 8; + var->green.offset = 8; + var->green.msb_right = 0; + + var->blue.length = 8; + var->blue.offset = 0; + var->blue.msb_right = 0; + + var->transp.length = 8; + var->transp.offset = 24; + var->transp.msb_right = 0; + break; + } + + if (var->pixclock < 1000) { + htotal = var->xres + var->right_margin + var->hsync_len + + var->left_margin; + vtotal = var->yres + var->lower_margin + var->vsync_len + + var->upper_margin; + var->pixclock = (vtotal * htotal * 6UL) / 100UL; + var->pixclock = KHZ2PICOS(var->pixclock); + dev_dbg(fbi->device, "pixclock set for 60Hz refresh = %u ps\n", + var->pixclock); + } + + var->height = -1; + var->width = -1; + var->grayscale = 0; + + /* Preserve sync flags */ + var->sync |= mx3_fbi->sync; + mx3_fbi->sync |= var->sync; + + return 0; +} + +static u32 chan_to_field(unsigned int chan, struct fb_bitfield *bf) +{ + chan &= 0xffff; + chan >>= 16 - bf->length; + return chan << bf->offset; +} + +static int mx3fb_setcolreg(unsigned int regno, unsigned int red, + unsigned int green, unsigned int blue, + unsigned int trans, struct fb_info *fbi) +{ + struct mx3fb_info *mx3_fbi = fbi->par; + u32 val; + int ret = 1; + + dev_dbg(fbi->device, "%s\n", __func__); + + mutex_lock(&mx3_fbi->mutex); + /* + * If greyscale is true, then we convert the RGB value + * to greyscale no matter what visual we are using. + */ + if (fbi->var.grayscale) + red = green = blue = (19595 * red + 38470 * green + + 7471 * blue) >> 16; + switch (fbi->fix.visual) { + case FB_VISUAL_TRUECOLOR: + /* + * 16-bit True Colour. We encode the RGB value + * according to the RGB bitfield information. + */ + if (regno < 16) { + u32 *pal = fbi->pseudo_palette; + + val = chan_to_field(red, &fbi->var.red); + val |= chan_to_field(green, &fbi->var.green); + val |= chan_to_field(blue, &fbi->var.blue); + + pal[regno] = val; + + ret = 0; + } + break; + + case FB_VISUAL_STATIC_PSEUDOCOLOR: + case FB_VISUAL_PSEUDOCOLOR: + break; + } + mutex_unlock(&mx3_fbi->mutex); + + return ret; +} + +/** + * mx3fb_blank() - blank the display. + */ +static int mx3fb_blank(int blank, struct fb_info *fbi) +{ + struct mx3fb_info *mx3_fbi = fbi->par; + struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; + + dev_dbg(fbi->device, "%s\n", __func__); + + dev_dbg(fbi->device, "blank = %d\n", blank); + + if (mx3_fbi->blank == blank) + return 0; + + mutex_lock(&mx3_fbi->mutex); + mx3_fbi->blank = blank; + + switch (blank) { + case FB_BLANK_POWERDOWN: + case FB_BLANK_VSYNC_SUSPEND: + case FB_BLANK_HSYNC_SUSPEND: + case FB_BLANK_NORMAL: + sdc_disable_channel(mx3_fbi); + sdc_set_brightness(mx3fb, 0); + break; + case FB_BLANK_UNBLANK: + sdc_enable_channel(mx3_fbi); + sdc_set_brightness(mx3fb, mx3fb->backlight_level); + break; + } + mutex_unlock(&mx3_fbi->mutex); + + return 0; +} + +/** + * mx3fb_pan_display() - pan or wrap the display + * @var: variable screen buffer information. + * @info: framebuffer information pointer. + * + * We look only at xoffset, yoffset and the FB_VMODE_YWRAP flag + */ +static int mx3fb_pan_display(struct fb_var_screeninfo *var, + struct fb_info *fbi) +{ + struct mx3fb_info *mx3_fbi = fbi->par; + u32 y_bottom; + unsigned long base; + off_t offset; + dma_cookie_t cookie; + struct scatterlist *sg = mx3_fbi->sg; + struct dma_chan *dma_chan = &mx3_fbi->idmac_channel->dma_chan; + struct dma_async_tx_descriptor *txd; + int ret; + + dev_dbg(fbi->device, "%s [%c]\n", __func__, + list_empty(&mx3_fbi->idmac_channel->queue) ? '-' : '+'); + + if (var->xoffset > 0) { + dev_dbg(fbi->device, "x panning not supported\n"); + return -EINVAL; + } + + if (fbi->var.xoffset == var->xoffset && + fbi->var.yoffset == var->yoffset) + return 0; /* No change, do nothing */ + + y_bottom = var->yoffset; + + if (!(var->vmode & FB_VMODE_YWRAP)) + y_bottom += var->yres; + + if (y_bottom > fbi->var.yres_virtual) + return -EINVAL; + + mutex_lock(&mx3_fbi->mutex); + + offset = (var->yoffset * var->xres_virtual + var->xoffset) * + (var->bits_per_pixel / 8); + base = fbi->fix.smem_start + offset; + + dev_dbg(fbi->device, "Updating SDC BG buf %d address=0x%08lX\n", + mx3_fbi->cur_ipu_buf, base); + + /* + * We enable the End of Frame interrupt, which will free a tx-descriptor, + * which we will need for the next device_prep_slave_sg(). The + * IRQ-handler will disable the IRQ again. + */ + init_completion(&mx3_fbi->flip_cmpl); + enable_irq(mx3_fbi->idmac_channel->eof_irq); + + ret = wait_for_completion_timeout(&mx3_fbi->flip_cmpl, HZ / 10); + if (ret <= 0) { + mutex_unlock(&mx3_fbi->mutex); + dev_info(fbi->device, "Panning failed due to %s\n", ret < 0 ? + "user interrupt" : "timeout"); + return ret ? : -ETIMEDOUT; + } + + mx3_fbi->cur_ipu_buf = !mx3_fbi->cur_ipu_buf; + + sg_dma_address(&sg[mx3_fbi->cur_ipu_buf]) = base; + sg_set_page(&sg[mx3_fbi->cur_ipu_buf], + virt_to_page(fbi->screen_base + offset), fbi->fix.smem_len, + offset_in_page(fbi->screen_base + offset)); + + txd = dma_chan->device->device_prep_slave_sg(dma_chan, sg + + mx3_fbi->cur_ipu_buf, 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT); + if (!txd) { + dev_err(fbi->device, + "Error preparing a DMA transaction descriptor.\n"); + mutex_unlock(&mx3_fbi->mutex); + return -EIO; + } + + txd->callback_param = txd; + txd->callback = mx3fb_dma_done; + + /* + * Emulate original mx3fb behaviour: each new call to idmac_tx_submit() + * should switch to another buffer + */ + cookie = txd->tx_submit(txd); + dev_dbg(fbi->device, "%d: Submit %p #%d\n", __LINE__, txd, cookie); + if (cookie < 0) { + dev_err(fbi->device, + "Error updating SDC buf %d to address=0x%08lX\n", + mx3_fbi->cur_ipu_buf, base); + mutex_unlock(&mx3_fbi->mutex); + return -EIO; + } + + if (mx3_fbi->txd) + async_tx_ack(mx3_fbi->txd); + mx3_fbi->txd = txd; + + fbi->var.xoffset = var->xoffset; + fbi->var.yoffset = var->yoffset; + + if (var->vmode & FB_VMODE_YWRAP) + fbi->var.vmode |= FB_VMODE_YWRAP; + else + fbi->var.vmode &= ~FB_VMODE_YWRAP; + + mutex_unlock(&mx3_fbi->mutex); + + dev_dbg(fbi->device, "Update complete\n"); + + return 0; +} + +/* + * This structure contains the pointers to the control functions that are + * invoked by the core framebuffer driver to perform operations like + * blitting, rectangle filling, copy regions and cursor definition. + */ +static struct fb_ops mx3fb_ops = { + .owner = THIS_MODULE, + .fb_set_par = mx3fb_set_par, + .fb_check_var = mx3fb_check_var, + .fb_setcolreg = mx3fb_setcolreg, + .fb_pan_display = mx3fb_pan_display, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, + .fb_blank = mx3fb_blank, +}; + +#ifdef CONFIG_PM +/* + * Power management hooks. Note that we won't be called from IRQ context, + * unlike the blank functions above, so we may sleep. + */ + +/* + * Suspends the framebuffer and blanks the screen. Power management support + */ +static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct mx3fb_data *drv_data = platform_get_drvdata(pdev); + struct mx3fb_info *mx3_fbi = drv_data->fbi->par; + + acquire_console_sem(); + fb_set_suspend(drv_data->fbi, 1); + release_console_sem(); + + if (mx3_fbi->blank == FB_BLANK_UNBLANK) { + sdc_disable_channel(mx3_fbi); + sdc_set_brightness(mx3fb, 0); + + } + return 0; +} + +/* + * Resumes the framebuffer and unblanks the screen. Power management support + */ +static int mx3fb_resume(struct platform_device *pdev) +{ + struct mx3fb_data *drv_data = platform_get_drvdata(pdev); + struct mx3fb_info *mx3_fbi = drv_data->fbi->par; + + if (mx3_fbi->blank == FB_BLANK_UNBLANK) { + sdc_enable_channel(mx3_fbi); + sdc_set_brightness(mx3fb, drv_data->backlight_level); + } + + acquire_console_sem(); + fb_set_suspend(drv_data->fbi, 0); + release_console_sem(); + + return 0; +} +#else +#define mx3fb_suspend NULL +#define mx3fb_resume NULL +#endif + +/* + * Main framebuffer functions + */ + +/** + * mx3fb_map_video_memory() - allocates the DRAM memory for the frame buffer. + * @fbi: framebuffer information pointer + * @return: Error code indicating success or failure + * + * This buffer is remapped into a non-cached, non-buffered, memory region to + * allow palette and pixel writes to occur without flushing the cache. Once this + * area is remapped, all virtual memory access to the video memory should occur + * at the new region. + */ +static int mx3fb_map_video_memory(struct fb_info *fbi) +{ + int retval = 0; + dma_addr_t addr; + + fbi->screen_base = dma_alloc_writecombine(fbi->device, + fbi->fix.smem_len, + &addr, GFP_DMA); + + if (!fbi->screen_base) { + dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n", + fbi->fix.smem_len); + retval = -EBUSY; + goto err0; + } + + fbi->fix.smem_start = addr; + + dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n", + (uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len); + + fbi->screen_size = fbi->fix.smem_len; + + /* Clear the screen */ + memset((char *)fbi->screen_base, 0, fbi->fix.smem_len); + + return 0; + +err0: + fbi->fix.smem_len = 0; + fbi->fix.smem_start = 0; + fbi->screen_base = NULL; + return retval; +} + +/** + * mx3fb_unmap_video_memory() - de-allocate frame buffer memory. + * @fbi: framebuffer information pointer + * @return: error code indicating success or failure + */ +static int mx3fb_unmap_video_memory(struct fb_info *fbi) +{ + dma_free_writecombine(fbi->device, fbi->fix.smem_len, + fbi->screen_base, fbi->fix.smem_start); + + fbi->screen_base = 0; + fbi->fix.smem_start = 0; + fbi->fix.smem_len = 0; + return 0; +} + +/** + * mx3fb_init_fbinfo() - initialize framebuffer information object. + * @return: initialized framebuffer structure. + */ +static struct fb_info *mx3fb_init_fbinfo(struct device *dev, struct fb_ops *ops) +{ + struct fb_info *fbi; + struct mx3fb_info *mx3fbi; + int ret; + + /* Allocate sufficient memory for the fb structure */ + fbi = framebuffer_alloc(sizeof(struct mx3fb_info), dev); + if (!fbi) + return NULL; + + mx3fbi = fbi->par; + mx3fbi->cookie = -EINVAL; + mx3fbi->cur_ipu_buf = 0; + + fbi->var.activate = FB_ACTIVATE_NOW; + + fbi->fbops = ops; + fbi->flags = FBINFO_FLAG_DEFAULT; + fbi->pseudo_palette = mx3fbi->pseudo_palette; + + mutex_init(&mx3fbi->mutex); + + /* Allocate colormap */ + ret = fb_alloc_cmap(&fbi->cmap, 16, 0); + if (ret < 0) { + framebuffer_release(fbi); + return NULL; + } + + return fbi; +} + +static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan) +{ + struct device *dev = mx3fb->dev; + struct mx3fb_platform_data *mx3fb_pdata = dev->platform_data; + const char *name = mx3fb_pdata->name; + unsigned int irq; + struct fb_info *fbi; + struct mx3fb_info *mx3fbi; + const struct fb_videomode *mode; + int ret, num_modes; + + ichan->client = mx3fb; + irq = ichan->eof_irq; + + if (ichan->dma_chan.chan_id != IDMAC_SDC_0) + return -EINVAL; + + fbi = mx3fb_init_fbinfo(dev, &mx3fb_ops); + if (!fbi) + return -ENOMEM; + + if (!fb_mode) + fb_mode = name; + + if (!fb_mode) { + ret = -EINVAL; + goto emode; + } + + if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) { + mode = mx3fb_pdata->mode; + num_modes = mx3fb_pdata->num_modes; + } else { + mode = mx3fb_modedb; + num_modes = ARRAY_SIZE(mx3fb_modedb); + } + + if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode, + num_modes, NULL, default_bpp)) { + ret = -EBUSY; + goto emode; + } + + fb_videomode_to_modelist(mode, num_modes, &fbi->modelist); + + /* Default Y virtual size is 2x panel size */ + fbi->var.yres_virtual = fbi->var.yres * 2; + + mx3fb->fbi = fbi; + + /* set Display Interface clock period */ + mx3fb_write_reg(mx3fb, 0x00100010L, DI_HSP_CLK_PER); + /* Might need to trigger HSP clock change - see 44.3.3.8.5 */ + + sdc_set_brightness(mx3fb, 255); + sdc_set_global_alpha(mx3fb, true, 0xFF); + sdc_set_color_key(mx3fb, IDMAC_SDC_0, false, 0); + + mx3fbi = fbi->par; + mx3fbi->idmac_channel = ichan; + mx3fbi->ipu_ch = ichan->dma_chan.chan_id; + mx3fbi->mx3fb = mx3fb; + mx3fbi->blank = FB_BLANK_NORMAL; + + init_completion(&mx3fbi->flip_cmpl); + disable_irq(ichan->eof_irq); + dev_dbg(mx3fb->dev, "disabling irq %d\n", ichan->eof_irq); + ret = mx3fb_set_par(fbi); + if (ret < 0) + goto esetpar; + + mx3fb_blank(FB_BLANK_UNBLANK, fbi); + + dev_info(dev, "mx3fb: fb registered, using mode %s\n", fb_mode); + + ret = register_framebuffer(fbi); + if (ret < 0) + goto erfb; + + return 0; + +erfb: +esetpar: +emode: + fb_dealloc_cmap(&fbi->cmap); + framebuffer_release(fbi); + + return ret; +} + +static bool chan_filter(struct dma_chan *chan, void *arg) +{ + struct dma_chan_request *rq = arg; + struct device *dev; + struct mx3fb_platform_data *mx3fb_pdata; + + if (!rq) + return false; + + dev = rq->mx3fb->dev; + mx3fb_pdata = dev->platform_data; + + return rq->id == chan->chan_id && + mx3fb_pdata->dma_dev == chan->device->dev; +} + +static void release_fbi(struct fb_info *fbi) +{ + mx3fb_unmap_video_memory(fbi); + + fb_dealloc_cmap(&fbi->cmap); + + unregister_framebuffer(fbi); + framebuffer_release(fbi); +} + +static int mx3fb_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + int ret; + struct resource *sdc_reg; + struct mx3fb_data *mx3fb; + dma_cap_mask_t mask; + struct dma_chan *chan; + struct dma_chan_request rq; + + /* + * Display Interface (DI) and Synchronous Display Controller (SDC) + * registers + */ + sdc_reg = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!sdc_reg) + return -EINVAL; + + mx3fb = kzalloc(sizeof(*mx3fb), GFP_KERNEL); + if (!mx3fb) + return -ENOMEM; + + spin_lock_init(&mx3fb->lock); + + mx3fb->reg_base = ioremap(sdc_reg->start, resource_size(sdc_reg)); + if (!mx3fb->reg_base) { + ret = -ENOMEM; + goto eremap; + } + + pr_debug("Remapped %x to %x at %p\n", sdc_reg->start, sdc_reg->end, + mx3fb->reg_base); + + /* IDMAC interface */ + dmaengine_get(); + + mx3fb->dev = dev; + platform_set_drvdata(pdev, mx3fb); + + rq.mx3fb = mx3fb; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + dma_cap_set(DMA_PRIVATE, mask); + rq.id = IDMAC_SDC_0; + chan = dma_request_channel(mask, chan_filter, &rq); + if (!chan) { + ret = -EBUSY; + goto ersdc0; + } + + ret = init_fb_chan(mx3fb, to_idmac_chan(chan)); + if (ret < 0) + goto eisdc0; + + mx3fb->backlight_level = 255; + + return 0; + +eisdc0: + dma_release_channel(chan); +ersdc0: + dmaengine_put(); + iounmap(mx3fb->reg_base); +eremap: + kfree(mx3fb); + dev_err(dev, "mx3fb: failed to register fb\n"); + return ret; +} + +static int mx3fb_remove(struct platform_device *dev) +{ + struct mx3fb_data *mx3fb = platform_get_drvdata(dev); + struct fb_info *fbi = mx3fb->fbi; + struct mx3fb_info *mx3_fbi = fbi->par; + struct dma_chan *chan; + + chan = &mx3_fbi->idmac_channel->dma_chan; + release_fbi(fbi); + + dma_release_channel(chan); + dmaengine_put(); + + iounmap(mx3fb->reg_base); + kfree(mx3fb); + return 0; +} + +static struct platform_driver mx3fb_driver = { + .driver = { + .name = MX3FB_NAME, + }, + .probe = mx3fb_probe, + .remove = mx3fb_remove, + .suspend = mx3fb_suspend, + .resume = mx3fb_resume, +}; + +/* + * Parse user specified options (`video=mx3fb:') + * example: + * video=mx3fb:bpp=16 + */ +static int mx3fb_setup(void) +{ +#ifndef MODULE + char *opt, *options = NULL; + + if (fb_get_options("mx3fb", &options)) + return -ENODEV; + + if (!options || !*options) + return 0; + + while ((opt = strsep(&options, ",")) != NULL) { + if (!*opt) + continue; + if (!strncmp(opt, "bpp=", 4)) + default_bpp = simple_strtoul(opt + 4, NULL, 0); + else + fb_mode = opt; + } +#endif + + return 0; +} + +static int __init mx3fb_init(void) +{ + int ret = mx3fb_setup(); + + if (ret < 0) + return ret; + + ret = platform_driver_register(&mx3fb_driver); + return ret; +} + +static void __exit mx3fb_exit(void) +{ + platform_driver_unregister(&mx3fb_driver); +} + +module_init(mx3fb_init); +module_exit(mx3fb_exit); + +MODULE_AUTHOR("Freescale Semiconductor, Inc."); +MODULE_DESCRIPTION("MX3 framebuffer driver"); +MODULE_ALIAS("platform:" MX3FB_NAME); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From 0b491eee46012772cbf029450d123e933c2e7940 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Wed, 21 Jan 2009 12:35:43 -0800 Subject: usbnet: allow type check of devdbg arguments in non-debug build Improve usbnet's devdbg to always type-check diagnostic arguments, like dev_dbg (device.h). This makes no change to the resulting size of usbnet modules. This patch also removes an #ifdef DEBUG directive from rndis_wlan so it's devdbg statements are always type-checked at compile time. Signed-off-by: Steve Glendinning Signed-off-by: David Brownell Signed-off-by: David S. Miller --- drivers/net/wireless/rndis_wlan.c | 2 -- include/linux/usb/usbnet.h | 4 +++- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index 607ce9f61b54..ed93ac41297f 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -1649,9 +1649,7 @@ static char *rndis_translate_scan(struct net_device *dev, char *end_buf, struct ndis_80211_bssid_ex *bssid) { -#ifdef DEBUG struct usbnet *usbdev = netdev_priv(dev); -#endif u8 *ie; char *current_val; int bssid_len, ie_len, i; diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index ba09fe88adda..7d3822243074 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -197,7 +197,9 @@ extern int usbnet_nway_reset(struct net_device *net); #define devdbg(usbnet, fmt, arg...) \ printk(KERN_DEBUG "%s: " fmt "\n" , (usbnet)->net->name , ## arg) #else -#define devdbg(usbnet, fmt, arg...) do {} while(0) +#define devdbg(usbnet, fmt, arg...) \ + ({ if (0) printk(KERN_DEBUG "%s: " fmt "\n" , (usbnet)->net->name , \ + ## arg); 0; }) #endif #define deverr(usbnet, fmt, arg...) \ -- cgit v1.2.3 From 6d317482944250228255bcbe97a95b7e7ad9a538 Mon Sep 17 00:00:00 2001 From: Christian Eggers Date: Wed, 21 Jan 2009 12:56:24 -0800 Subject: usb/mcs7830: Don't use buffers from stack for USB transfers mcs7830_set_reg() and mcs7830_get_reg() are called with buffers from stack which must not be used directly for USB transfers. This causes corruption of the stack particulary on non x86 architectures because DMA may be used for these transfers. Signed-off-by: Christian Eggers Acked-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/usb/mcs7830.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c index 5385d66b306e..ced8f36ebd01 100644 --- a/drivers/net/usb/mcs7830.c +++ b/drivers/net/usb/mcs7830.c @@ -94,10 +94,18 @@ static int mcs7830_get_reg(struct usbnet *dev, u16 index, u16 size, void *data) { struct usb_device *xdev = dev->udev; int ret; + void *buffer; + + buffer = kmalloc(size, GFP_NOIO); + if (buffer == NULL) + return -ENOMEM; ret = usb_control_msg(xdev, usb_rcvctrlpipe(xdev, 0), MCS7830_RD_BREQ, - MCS7830_RD_BMREQ, 0x0000, index, data, + MCS7830_RD_BMREQ, 0x0000, index, buffer, size, MCS7830_CTRL_TIMEOUT); + memcpy(data, buffer, size); + kfree(buffer); + return ret; } @@ -105,10 +113,18 @@ static int mcs7830_set_reg(struct usbnet *dev, u16 index, u16 size, void *data) { struct usb_device *xdev = dev->udev; int ret; + void *buffer; + + buffer = kmalloc(size, GFP_NOIO); + if (buffer == NULL) + return -ENOMEM; + + memcpy(buffer, data, size); ret = usb_control_msg(xdev, usb_sndctrlpipe(xdev, 0), MCS7830_WR_BREQ, - MCS7830_WR_BMREQ, 0x0000, index, data, + MCS7830_WR_BMREQ, 0x0000, index, buffer, size, MCS7830_CTRL_TIMEOUT); + kfree(buffer); return ret; } -- cgit v1.2.3 From ad2563c2e42fc67b0976aeb70e9f3faf1c1196e8 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 19 Jan 2009 17:21:45 +1000 Subject: drm: create mode_config idr lock Create a separate mode_config IDR lock for simplicity. The core DRM config structures (connector, mode, etc. lists) are still protected by the mode_config mutex, but the CRTC IDR (used for the various identifier IDs) is now protected by the mode_config idr_mutex. Simplifies the locking a bit and removes a warning. All objects are protected by the config mutex, we may in the future, split the object further to have reference counts. Signed-off-by: Jesse Barnes Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc.c | 14 +++++++++----- include/drm/drm_crtc.h | 3 ++- 2 files changed, 11 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 5b2cbb778162..bfce0992fefb 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -194,7 +194,6 @@ char *drm_get_connector_status_name(enum drm_connector_status status) * @type: object type * * LOCKING: - * Caller must hold DRM mode_config lock. * * Create a unique identifier based on @ptr in @dev's identifier space. Used * for tracking modes, CRTCs and connectors. @@ -209,15 +208,15 @@ static int drm_mode_object_get(struct drm_device *dev, int new_id = 0; int ret; - WARN(!mutex_is_locked(&dev->mode_config.mutex), - "%s called w/o mode_config lock\n", __func__); again: if (idr_pre_get(&dev->mode_config.crtc_idr, GFP_KERNEL) == 0) { DRM_ERROR("Ran out memory getting a mode number\n"); return -EINVAL; } + mutex_lock(&dev->mode_config.idr_mutex); ret = idr_get_new_above(&dev->mode_config.crtc_idr, obj, 1, &new_id); + mutex_unlock(&dev->mode_config.idr_mutex); if (ret == -EAGAIN) goto again; @@ -239,16 +238,20 @@ again: static void drm_mode_object_put(struct drm_device *dev, struct drm_mode_object *object) { + mutex_lock(&dev->mode_config.idr_mutex); idr_remove(&dev->mode_config.crtc_idr, object->id); + mutex_unlock(&dev->mode_config.idr_mutex); } void *drm_mode_object_find(struct drm_device *dev, uint32_t id, uint32_t type) { - struct drm_mode_object *obj; + struct drm_mode_object *obj = NULL; + mutex_lock(&dev->mode_config.idr_mutex); obj = idr_find(&dev->mode_config.crtc_idr, id); if (!obj || (obj->type != type) || (obj->id != id)) - return NULL; + obj = NULL; + mutex_unlock(&dev->mode_config.idr_mutex); return obj; } @@ -786,6 +789,7 @@ EXPORT_SYMBOL(drm_mode_create_dithering_property); void drm_mode_config_init(struct drm_device *dev) { mutex_init(&dev->mode_config.mutex); + mutex_init(&dev->mode_config.idr_mutex); INIT_LIST_HEAD(&dev->mode_config.fb_list); INIT_LIST_HEAD(&dev->mode_config.fb_kernel_list); INIT_LIST_HEAD(&dev->mode_config.crtc_list); diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index 47809ac94bc3..d54de24bf371 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -528,7 +528,8 @@ struct drm_mode_group { * */ struct drm_mode_config { - struct mutex mutex; /* protects configuration and IDR */ + struct mutex mutex; /* protects configuration (mode lists etc.) */ + struct mutex idr_mutex; /* for IDR management */ struct idr crtc_idr; /* use this idr for all IDs, fb, crtc, connector, modes - just makes life easier */ /* this is limited to one for now */ int num_fb; -- cgit v1.2.3 From 260883c85611d3a7e27130af9aef15252856e14f Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 22 Jan 2009 17:58:49 +1000 Subject: i915: fix freeing path for gem phys objects. This off-by-one was pointed out by Jesse Barnes. Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 96316fd47233..b15ee1f7c01c 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3364,7 +3364,7 @@ void i915_gem_free_all_phys_object(struct drm_device *dev) { int i; - for (i = 0; i < I915_MAX_PHYS_OBJECT; i++) + for (i = I915_GEM_PHYS_CURSOR_0; i <= I915_MAX_PHYS_OBJECT; i++) i915_gem_free_phys_object(dev, i); } -- cgit v1.2.3 From ed2dd4b0cc1494c27478f4ea8452f68d2037a60c Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 22 Jan 2009 22:21:16 +1000 Subject: drm/i915: remove unnecessary debug output in KMS init We don't really need to print out the FB BAR... Signed-off-by: Jesse Barnes Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_dma.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index bbadf1c04142..57e8eb636a77 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -944,8 +944,6 @@ static int i915_load_modeset_init(struct drm_device *dev) dev->mode_config.fb_base = drm_get_resource_start(dev, fb_bar) & 0xff000000; - DRM_DEBUG("*** fb base 0x%08lx\n", dev->mode_config.fb_base); - if (IS_MOBILE(dev) || (IS_I9XX(dev) && !IS_I965G(dev) && !IS_G33(dev))) dev_priv->cursor_needs_physical = true; else -- cgit v1.2.3 From 335041ed31d774391d9add49824d05e7d19d93e9 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 22 Jan 2009 22:22:06 +1000 Subject: drm/i915: hook up LVDS DPMS property The LVDS output supports DPMS calls, but we never hooked up the property code, so set property calls didn't actually do anything. Implement a set_property callback for the LVDS output so that the right thing happens. Signed-off-by: Jesse Barnes --- drivers/gpu/drm/i915/intel_lvds.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 2fafdcc108fe..6b1148fc2cbe 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -340,6 +340,18 @@ static void intel_lvds_destroy(struct drm_connector *connector) kfree(connector); } +static int intel_lvds_set_property(struct drm_connector *connector, + struct drm_property *property, + uint64_t value) +{ + struct drm_device *dev = connector->dev; + + if (property == dev->mode_config.dpms_property && connector->encoder) + intel_lvds_dpms(connector->encoder, (uint32_t)(value & 0xf)); + + return 0; +} + static const struct drm_encoder_helper_funcs intel_lvds_helper_funcs = { .dpms = intel_lvds_dpms, .mode_fixup = intel_lvds_mode_fixup, @@ -359,6 +371,7 @@ static const struct drm_connector_funcs intel_lvds_connector_funcs = { .restore = intel_lvds_restore, .detect = intel_lvds_detect, .fill_modes = drm_helper_probe_single_connector_modes, + .set_property = intel_lvds_set_property, .destroy = intel_lvds_destroy, }; -- cgit v1.2.3 From 4942f8b23b56a3f9a713d4436338710579329ffc Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 22 Jan 2009 22:23:53 +1000 Subject: drm: don't whine about not reading EDID data Make this message a little quieter, since it's common and not necessarily indicative of a problem. Signed-off-by: Jesse Barnes Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_edid.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 0fbb0da342cb..5a4d3244758a 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -660,7 +660,7 @@ struct edid *drm_get_edid(struct drm_connector *connector, edid = (struct edid *)drm_ddc_read(adapter); if (!edid) { - dev_warn(&connector->dev->pdev->dev, "%s: no EDID data\n", + dev_info(&connector->dev->pdev->dev, "%s: no EDID data\n", drm_get_connector_name(connector)); return NULL; } -- cgit v1.2.3 From 1bb88edb7a3769992026f34fd648bb459b0469aa Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Thu, 15 Jan 2009 01:16:25 -0800 Subject: drm: stash AGP include under the do-we-have-AGP ifdef This fixes the MIPS with DRM build. Signed-off-by: Eric Anholt Tested-by: Martin Michlmayr Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_agpsupport.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_agpsupport.c b/drivers/gpu/drm/drm_agpsupport.c index 3d33b8252b58..14796594e5d9 100644 --- a/drivers/gpu/drm/drm_agpsupport.c +++ b/drivers/gpu/drm/drm_agpsupport.c @@ -33,10 +33,11 @@ #include "drmP.h" #include -#include #if __OS_HAS_AGP +#include + /** * Get AGP information. * -- cgit v1.2.3 From 2906f0258770d3a9c4e65364df8acc904e148bbe Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Tue, 20 Jan 2009 19:10:54 -0800 Subject: drm/i915: Fix cursor physical address choice to match the 2D driver. Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_dma.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 57e8eb636a77..ee64b7301f67 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -944,11 +944,14 @@ static int i915_load_modeset_init(struct drm_device *dev) dev->mode_config.fb_base = drm_get_resource_start(dev, fb_bar) & 0xff000000; - if (IS_MOBILE(dev) || (IS_I9XX(dev) && !IS_I965G(dev) && !IS_G33(dev))) + if (IS_MOBILE(dev) || IS_I9XX(dev)) dev_priv->cursor_needs_physical = true; else dev_priv->cursor_needs_physical = false; + if (IS_I965G(dev) || IS_G33(dev)) + dev_priv->cursor_needs_physical = false; + ret = i915_probe_agp(dev, &agp_size, &prealloc_size); if (ret) goto kfree_devname; -- cgit v1.2.3 From 7fe99c4e28ab54eada8aa456b417114e6ef21587 Mon Sep 17 00:00:00 2001 From: Andrey Borzenkov Date: Tue, 20 Jan 2009 20:26:46 +0300 Subject: orinoco: move kmalloc(..., GFP_KERNEL) outside spinlock in orinoco_ioctl_set_genie [ 56.923623] BUG: sleeping function called from invalid context at /home/bor/src/linux-git/mm/slub.c:1599 [ 56.923644] in_atomic(): 0, irqs_disabled(): 1, pid: 3031, name: wpa_supplicant [ 56.923656] 2 locks held by wpa_supplicant/3031: [ 56.923662] #0: (rtnl_mutex){--..}, at: [] rtnl_lock+0xf/0x20 [ 56.923703] #1: (&priv->lock){++..}, at: [] orinoco_ioctl_set_genie+0x52/0x130 [orinoco] [ 56.923782] irq event stamp: 910 [ 56.923788] hardirqs last enabled at (909): [] __kmalloc+0x7b/0x140 [ 56.923820] hardirqs last disabled at (910): [] _spin_lock_irqsave+0x19/0x80 [ 56.923847] softirqs last enabled at (880): [] __do_softirq+0xc4/0x110 [ 56.923865] softirqs last disabled at (871): [] do_softirq+0x8e/0xe0 [ 56.923895] Pid: 3031, comm: wpa_supplicant Not tainted 2.6.29-rc2-1avb #1 [ 56.923905] Call Trace: [ 56.923919] [] ? do_softirq+0x8e/0xe0 [ 56.923941] [] __might_sleep+0xd2/0x100 [ 56.923952] [] __kmalloc+0xd7/0x140 [ 56.923963] [] ? _spin_lock_irqsave+0x6a/0x80 [ 56.923981] [] ? orinoco_ioctl_set_genie+0x79/0x130 [orinoco] [ 56.923999] [] ? orinoco_ioctl_set_genie+0x52/0x130 [orinoco] [ 56.924017] [] orinoco_ioctl_set_genie+0x79/0x130 [orinoco] [ 56.924036] [] ? copy_from_user+0x35/0x130 [ 56.924061] [] ioctl_standard_call+0x196/0x380 [ 56.924085] [] ? __dev_get_by_name+0x85/0xb0 [ 56.924096] [] wext_handle_ioctl+0x14f/0x230 [ 56.924113] [] ? orinoco_ioctl_set_genie+0x0/0x130 [orinoco] [ 56.924132] [] dev_ioctl+0x495/0x570 [ 56.924155] [] ? sys_sendto+0xa5/0xd0 [ 56.924171] [] ? mark_held_locks+0x48/0x90 [ 56.924183] [] ? sock_ioctl+0x0/0x280 [ 56.924193] [] sock_ioctl+0xfd/0x280 [ 56.924203] [] ? sock_ioctl+0x0/0x280 [ 56.924235] [] vfs_ioctl+0x20/0x80 [ 56.924246] [] do_vfs_ioctl+0x72/0x570 [ 56.924257] [] ? sys_send+0x32/0x40 [ 56.924268] [] ? sys_socketcall+0x1d0/0x2a0 [ 56.924280] [] ? sysenter_exit+0xf/0x16 [ 56.924292] [] sys_ioctl+0x39/0x70 [ 56.924302] [] sysenter_do_call+0x12/0x31 Signed-off-by: Andrey Borzenkov Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/orinoco/orinoco.c | 30 +++++++++++++----------------- 1 file changed, 13 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/orinoco/orinoco.c b/drivers/net/wireless/orinoco/orinoco.c index c3bb85e0251e..39eab39b065f 100644 --- a/drivers/net/wireless/orinoco/orinoco.c +++ b/drivers/net/wireless/orinoco/orinoco.c @@ -5068,33 +5068,30 @@ static int orinoco_ioctl_set_genie(struct net_device *dev, struct orinoco_private *priv = netdev_priv(dev); u8 *buf; unsigned long flags; - int err = 0; /* cut off at IEEE80211_MAX_DATA_LEN */ if ((wrqu->data.length > IEEE80211_MAX_DATA_LEN) || (wrqu->data.length && (extra == NULL))) return -EINVAL; - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - if (wrqu->data.length) { buf = kmalloc(wrqu->data.length, GFP_KERNEL); - if (buf == NULL) { - err = -ENOMEM; - goto out; - } + if (buf == NULL) + return -ENOMEM; memcpy(buf, extra, wrqu->data.length); - kfree(priv->wpa_ie); - priv->wpa_ie = buf; - priv->wpa_ie_len = wrqu->data.length; - } else { - kfree(priv->wpa_ie); - priv->wpa_ie = NULL; - priv->wpa_ie_len = 0; + } else + buf = NULL; + + if (orinoco_lock(priv, &flags) != 0) { + kfree(buf); + return -EBUSY; } + kfree(priv->wpa_ie); + priv->wpa_ie = buf; + priv->wpa_ie_len = wrqu->data.length; + if (priv->wpa_ie) { /* Looks like wl_lkm wants to check the auth alg, and * somehow pass it to the firmware. @@ -5103,9 +5100,8 @@ static int orinoco_ioctl_set_genie(struct net_device *dev, */ } -out: orinoco_unlock(priv, &flags); - return err; + return 0; } static int orinoco_ioctl_get_genie(struct net_device *dev, -- cgit v1.2.3 From 7490889c105764d80af58dee5983d91a84e4aec8 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sun, 18 Jan 2009 20:15:24 +0100 Subject: rt2x00: Fix TX rate short preamble detection Mac80211 provides 2 structures to handle bitrates, namely ieee80211_rate and ieee80211_tx_rate. To determine the short preamble mode for an outgoing frame, the flag IEEE80211_TX_RC_USE_SHORT_PREAMBLE must be checked on ieee80211_tx_rate and not ieee80211_rate (which rt2x00 did). This fixes a regression which was triggered in 2.6.29-rcX as reported by Chris Clayton. Signed-off-by: Ivo van Doorn Tested-By: Chris Clayton Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00queue.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 746a8f36b931..0709decec9c2 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -154,6 +154,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data; + struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0]; struct ieee80211_rate *rate = ieee80211_get_tx_rate(rt2x00dev->hw, tx_info); const struct rt2x00_rate *hwrate; @@ -313,7 +314,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, * When preamble is enabled we should set the * preamble bit for the signal. */ - if (rate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) + if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) txdesc->signal |= 0x08; } } -- cgit v1.2.3 From 11eaea416716deebcb18383b201ba8033cbf33dc Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Sun, 18 Jan 2009 23:20:58 -0500 Subject: orinoco: use KERN_DEBUG for link status messages KERN_INFO is too "loud" for messages that are generated by the ordinary events, such as accociation. Use of KERN_DEBUG is consistent with mac80211. Suggested by Michael Gilbert Signed-off-by: Pavel Roskin Signed-off-by: John W. Linville --- drivers/net/wireless/orinoco/orinoco.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/orinoco/orinoco.c b/drivers/net/wireless/orinoco/orinoco.c index 39eab39b065f..45a04faa7818 100644 --- a/drivers/net/wireless/orinoco/orinoco.c +++ b/drivers/net/wireless/orinoco/orinoco.c @@ -1673,7 +1673,7 @@ static void print_linkstatus(struct net_device *dev, u16 status) s = "UNKNOWN"; } - printk(KERN_INFO "%s: New link status: %s (%04x)\n", + printk(KERN_DEBUG "%s: New link status: %s (%04x)\n", dev->name, s, status); } -- cgit v1.2.3 From 40ab73cc6c38ce93253fe8c2d7e502c948adfd13 Mon Sep 17 00:00:00 2001 From: Chr Date: Mon, 19 Jan 2009 14:30:26 +0100 Subject: p54: add missing break in eeprom parser This patch fixes a obvious memory leak in the eeprom parser. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54common.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index 12d0717c3992..61b01930d9aa 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -451,8 +451,8 @@ static int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len) } if (err) goto err; - - } + } + break; case PDR_PRISM_ZIF_TX_IQ_CALIBRATION: priv->iq_autocal = kmalloc(data_len, GFP_KERNEL); if (!priv->iq_autocal) { -- cgit v1.2.3 From 12da401e0d616f738c8b8a368d1f63f365cc78e4 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Mon, 19 Jan 2009 16:08:48 +0100 Subject: p54: more cryptographic accelerator fixes If we let the firmware do the data encryption, we have to remove the ICV and (M)MIC at the end of the frame before we can give it back to mac80211. Or, these data frames have a few trailing bytes on cooked monitor interfaces. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54common.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index 61b01930d9aa..34561e6e816b 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -745,7 +745,7 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry); struct p54_hdr *entry_hdr; struct p54_tx_data *entry_data; - int pad = 0; + unsigned int pad = 0, frame_len; range = (void *)info->rate_driver_data; if (range->start_addr != addr) { @@ -768,6 +768,7 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) __skb_unlink(entry, &priv->tx_queue); spin_unlock_irqrestore(&priv->tx_queue.lock, flags); + frame_len = entry->len; entry_hdr = (struct p54_hdr *) entry->data; entry_data = (struct p54_tx_data *) entry_hdr->data; priv->tx_stats[entry_data->hw_queue].len--; @@ -814,15 +815,28 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) info->status.ack_signal = p54_rssi_to_dbm(dev, (int)payload->ack_rssi); - if (entry_data->key_type == P54_CRYPTO_TKIPMICHAEL) { + /* Undo all changes to the frame. */ + switch (entry_data->key_type) { + case P54_CRYPTO_TKIPMICHAEL: { u8 *iv = (u8 *)(entry_data->align + pad + - entry_data->crypt_offset); + entry_data->crypt_offset); /* Restore the original TKIP IV. */ iv[2] = iv[0]; iv[0] = iv[1]; iv[1] = (iv[0] | 0x20) & 0x7f; /* WEPSeed - 8.3.2.2 */ + + frame_len -= 12; /* remove TKIP_MMIC + TKIP_ICV */ + break; + } + case P54_CRYPTO_AESCCMP: + frame_len -= 8; /* remove CCMP_MIC */ + break; + case P54_CRYPTO_WEP: + frame_len -= 4; /* remove WEP_ICV */ + break; } + skb_trim(entry, frame_len); skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data)); ieee80211_tx_status_irqsafe(dev, entry); goto out; -- cgit v1.2.3 From e2fe154e918276e900067a9d1d3a6a963faee041 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Tue, 20 Jan 2009 00:27:57 +0100 Subject: p54usb: fix nasty use after free In theory, the firmware acks the received a data frame, before signaling the driver to free it again. However Artur Skawina has shown that it can happen in reverse order as well. This is very bad and could lead to memory corruptions, oopses and panics. Thanks to Artur Skawina for reporting and debugging this issue. Signed-off-by: Christian Lamparter Tested-by: Artur Skawina Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54usb.c | 34 +++++++++++++--------------------- 1 file changed, 13 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index 6a6a72f6f82c..4487cc5c928b 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -144,11 +144,8 @@ static void p54u_tx_cb(struct urb *urb) struct sk_buff *skb = urb->context; struct ieee80211_hw *dev = (struct ieee80211_hw *) usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0)); - struct p54u_priv *priv = dev->priv; - skb_pull(skb, priv->common.tx_hdr_len); - if (FREE_AFTER_TX(skb)) - p54_free_skb(dev, skb); + p54_free_skb(dev, skb); } static void p54u_tx_dummy_cb(struct urb *urb) { } @@ -230,7 +227,8 @@ static void p54u_tx_3887(struct ieee80211_hw *dev, struct sk_buff *skb) p54u_tx_dummy_cb, dev); usb_fill_bulk_urb(data_urb, priv->udev, usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), - skb->data, skb->len, p54u_tx_cb, skb); + skb->data, skb->len, FREE_AFTER_TX(skb) ? + p54u_tx_cb : p54u_tx_dummy_cb, skb); usb_anchor_urb(addr_urb, &priv->submitted); err = usb_submit_urb(addr_urb, GFP_ATOMIC); @@ -269,28 +267,24 @@ static void p54u_tx_lm87(struct ieee80211_hw *dev, struct sk_buff *skb) { struct p54u_priv *priv = dev->priv; struct urb *data_urb; - struct lm87_tx_hdr *hdr; - __le32 checksum; - __le32 addr = ((struct p54_hdr *)skb->data)->req_id; + struct lm87_tx_hdr *hdr = (void *)skb->data - sizeof(*hdr); data_urb = usb_alloc_urb(0, GFP_ATOMIC); if (!data_urb) return; - checksum = p54u_lm87_chksum((__le32 *)skb->data, skb->len); - hdr = (struct lm87_tx_hdr *)skb_push(skb, sizeof(*hdr)); - hdr->chksum = checksum; - hdr->device_addr = addr; + hdr->chksum = p54u_lm87_chksum((__le32 *)skb->data, skb->len); + hdr->device_addr = ((struct p54_hdr *)skb->data)->req_id; usb_fill_bulk_urb(data_urb, priv->udev, usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), - skb->data, skb->len, p54u_tx_cb, skb); + hdr, skb->len + sizeof(*hdr), FREE_AFTER_TX(skb) ? + p54u_tx_cb : p54u_tx_dummy_cb, skb); data_urb->transfer_flags |= URB_ZERO_PACKET; usb_anchor_urb(data_urb, &priv->submitted); if (usb_submit_urb(data_urb, GFP_ATOMIC)) { usb_unanchor_urb(data_urb); - skb_pull(skb, sizeof(*hdr)); p54_free_skb(dev, skb); } usb_free_urb(data_urb); @@ -300,11 +294,9 @@ static void p54u_tx_net2280(struct ieee80211_hw *dev, struct sk_buff *skb) { struct p54u_priv *priv = dev->priv; struct urb *int_urb, *data_urb; - struct net2280_tx_hdr *hdr; + struct net2280_tx_hdr *hdr = (void *)skb->data - sizeof(*hdr); struct net2280_reg_write *reg; int err = 0; - __le32 addr = ((struct p54_hdr *) skb->data)->req_id; - __le16 len = cpu_to_le16(skb->len); reg = kmalloc(sizeof(*reg), GFP_ATOMIC); if (!reg) @@ -327,10 +319,9 @@ static void p54u_tx_net2280(struct ieee80211_hw *dev, struct sk_buff *skb) reg->addr = cpu_to_le32(P54U_DEV_BASE); reg->val = cpu_to_le32(ISL38XX_DEV_INT_DATA); - hdr = (void *)skb_push(skb, sizeof(*hdr)); memset(hdr, 0, sizeof(*hdr)); - hdr->len = len; - hdr->device_addr = addr; + hdr->len = cpu_to_le16(skb->len); + hdr->device_addr = ((struct p54_hdr *) skb->data)->req_id; usb_fill_bulk_urb(int_urb, priv->udev, usb_sndbulkpipe(priv->udev, P54U_PIPE_DEV), reg, sizeof(*reg), @@ -345,7 +336,8 @@ static void p54u_tx_net2280(struct ieee80211_hw *dev, struct sk_buff *skb) usb_fill_bulk_urb(data_urb, priv->udev, usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), - skb->data, skb->len, p54u_tx_cb, skb); + hdr, skb->len + sizeof(*hdr), FREE_AFTER_TX(skb) ? + p54u_tx_cb : p54u_tx_dummy_cb, skb); usb_anchor_urb(int_urb, &priv->submitted); err = usb_submit_urb(int_urb, GFP_ATOMIC); -- cgit v1.2.3 From de2624966f9bc6ffafc4fd6555336fabc2854420 Mon Sep 17 00:00:00 2001 From: Hin-Tak Leung Date: Mon, 19 Jan 2009 23:39:09 +0000 Subject: zd1211rw: adding Sitecom WL-603 (0df6:0036) to the USB id list Giuseppe Cala (The second "a" in "Cala" should be a grave, U+00E0) reported success on zd1211-devs@lists.sourceforge.net. The chip info is: zd1211b chip 0df6:0036 v4810 high 00-0c-f6 AL2230_RF pa0 g--N- The Sitecom WL-603 is detected as a zd1211b with a AL2230 RF transceiver chip. Signed-off-by: Giuseppe Cala Signed-off-by: Hin-Tak Leung Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_usb.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index b5db57d2fcf5..17527f765b39 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -84,6 +84,7 @@ static struct usb_device_id usb_ids[] = { { USB_DEVICE(0x0586, 0x340a), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x07fa, 0x1196), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x0df6, 0x0036), .driver_info = DEVICE_ZD1211B }, /* "Driverless" devices that need ejecting */ { USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER }, { USB_DEVICE(0x0ace, 0x20ff), .driver_info = DEVICE_INSTALLER }, -- cgit v1.2.3 From 637f883739b32746889a191f282c9ea2590ecf4f Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Mon, 19 Jan 2009 15:30:32 -0800 Subject: iwlwifi: return NETDEV_TX_OK from _tx ops be consistent with mac80211 drivers and return correct return code. NETDEV_TX_OK is 0, but we need to be consistent wrt formatting amongst implementations re: http://marc.info/?l=linux-wireless&m=123119327419865&w=2 Signed-off-by: Reinette Chatre Reviewed-by: Tomas Winkler Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 2 +- drivers/net/wireless/iwlwifi/iwl3945-base.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 5da6b35cd26d..0dc8eed16404 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2482,7 +2482,7 @@ static int iwl_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) dev_kfree_skb_any(skb); IWL_DEBUG_MACDUMP("leave\n"); - return 0; + return NETDEV_TX_OK; } static int iwl_mac_add_interface(struct ieee80211_hw *hw, diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 15f5655c636e..95d01984c80e 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -6538,7 +6538,7 @@ static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) dev_kfree_skb_any(skb); IWL_DEBUG_MAC80211("leave\n"); - return 0; + return NETDEV_TX_OK; } static int iwl3945_mac_add_interface(struct ieee80211_hw *hw, -- cgit v1.2.3 From 81f75bbf67c7a26ea1266ac93b9319bb985d588d Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Thu, 22 Jan 2009 03:37:31 +0000 Subject: bnx2x: Reset HW before use To avoid complications, make sure that the HW is in reset (as it should be) before trying to take it out of reset. In normal flows, the HW is indeed in rest so this should have no effect Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 074374ff93f3..ed8b34665931 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -5148,12 +5148,21 @@ static void enable_blocks_attention(struct bnx2x *bp) } +static void bnx2x_reset_common(struct bnx2x *bp) +{ + /* reset_common */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, + 0xd3ffff7f); + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, 0x1403); +} + static int bnx2x_init_common(struct bnx2x *bp) { u32 val, i; DP(BNX2X_MSG_MCP, "starting common init func %d\n", BP_FUNC(bp)); + bnx2x_reset_common(bp); REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff); REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, 0xfffc); @@ -6640,14 +6649,6 @@ static void bnx2x_reset_port(struct bnx2x *bp) /* TODO: Close Doorbell port? */ } -static void bnx2x_reset_common(struct bnx2x *bp) -{ - /* reset_common */ - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, - 0xd3ffff7f); - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, 0x1403); -} - static void bnx2x_reset_chip(struct bnx2x *bp, u32 reset_code) { DP(BNX2X_MSG_MCP, "function %d reset_code %x\n", -- cgit v1.2.3 From e94d8af3da79f4bfbd22819d28ecf0602456f06f Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Thu, 22 Jan 2009 03:37:36 +0000 Subject: bnx2x: Disable napi Calling napi disabled unconditionally at netif stop Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index ed8b34665931..860b9f8ddd30 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -6143,8 +6143,8 @@ static void bnx2x_netif_start(struct bnx2x *bp) static void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw) { bnx2x_int_disable_sync(bp, disable_hw); + bnx2x_napi_disable(bp); if (netif_running(bp->dev)) { - bnx2x_napi_disable(bp); netif_tx_disable(bp->dev); bp->dev->trans_start = jiffies; /* prevent tx timeout */ } @@ -6689,8 +6689,7 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode) bnx2x_set_storm_rx_mode(bp); bnx2x_netif_stop(bp, 1); - if (!netif_running(bp->dev)) - bnx2x_napi_disable(bp); + del_timer_sync(&bp->timer); SHMEM_WR(bp, func_mb[BP_FUNC(bp)].drv_pulse_mb, (DRV_PULSE_ALWAYS_ALIVE | bp->fw_drv_pulse_wr_seq)); -- cgit v1.2.3 From 2dfe0e1fecb582b4aae7f2490904864c05472f3a Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Thu, 22 Jan 2009 03:37:44 +0000 Subject: bnx2x: Handling load failures Failures on load were not handled correctly - separate the flow to handle different failures Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 154 +++++++++++++++++++++++++++-------------------- 1 file changed, 88 insertions(+), 66 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 860b9f8ddd30..707c4bbe46a4 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -6328,7 +6328,7 @@ static void bnx2x_set_rx_mode(struct net_device *dev); static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) { u32 load_code; - int i, rc; + int i, rc = 0; #ifdef BNX2X_STOP_ON_ERROR if (unlikely(bp->panic)) return -EPERM; @@ -6336,48 +6336,6 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) bp->state = BNX2X_STATE_OPENING_WAIT4_LOAD; - /* Send LOAD_REQUEST command to MCP - Returns the type of LOAD command: - if it is the first port to be initialized - common blocks should be initialized, otherwise - not - */ - if (!BP_NOMCP(bp)) { - load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ); - if (!load_code) { - BNX2X_ERR("MCP response failure, aborting\n"); - return -EBUSY; - } - if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED) - return -EBUSY; /* other port in diagnostic mode */ - - } else { - int port = BP_PORT(bp); - - DP(NETIF_MSG_IFUP, "NO MCP load counts before us %d, %d, %d\n", - load_count[0], load_count[1], load_count[2]); - load_count[0]++; - load_count[1 + port]++; - DP(NETIF_MSG_IFUP, "NO MCP new load counts %d, %d, %d\n", - load_count[0], load_count[1], load_count[2]); - if (load_count[0] == 1) - load_code = FW_MSG_CODE_DRV_LOAD_COMMON; - else if (load_count[1 + port] == 1) - load_code = FW_MSG_CODE_DRV_LOAD_PORT; - else - load_code = FW_MSG_CODE_DRV_LOAD_FUNCTION; - } - - if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) || - (load_code == FW_MSG_CODE_DRV_LOAD_PORT)) - bp->port.pmf = 1; - else - bp->port.pmf = 0; - DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf); - - /* if we can't use MSI-X we only need one fp, - * so try to enable MSI-X with the requested number of fp's - * and fallback to inta with one fp - */ if (use_inta) { bp->num_queues = 1; @@ -6392,7 +6350,15 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) else bp->num_queues = 1; - if (bnx2x_enable_msix(bp)) { + DP(NETIF_MSG_IFUP, + "set number of queues to %d\n", bp->num_queues); + + /* if we can't use MSI-X we only need one fp, + * so try to enable MSI-X with the requested number of fp's + * and fallback to MSI or legacy INTx with one fp + */ + rc = bnx2x_enable_msix(bp); + if (rc) { /* failed to enable MSI-X */ bp->num_queues = 1; if (use_multi) @@ -6400,8 +6366,6 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) " to enable MSI-X\n"); } } - DP(NETIF_MSG_IFUP, - "set number of queues to %d\n", bp->num_queues); if (bnx2x_alloc_mem(bp)) return -ENOMEM; @@ -6410,30 +6374,85 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) bnx2x_fp(bp, i, disable_tpa) = ((bp->flags & TPA_ENABLE_FLAG) == 0); + for_each_queue(bp, i) + netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi), + bnx2x_poll, 128); + +#ifdef BNX2X_STOP_ON_ERROR + for_each_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + + fp->poll_no_work = 0; + fp->poll_calls = 0; + fp->poll_max_calls = 0; + fp->poll_complete = 0; + fp->poll_exit = 0; + } +#endif + bnx2x_napi_enable(bp); + if (bp->flags & USING_MSIX_FLAG) { rc = bnx2x_req_msix_irqs(bp); if (rc) { pci_disable_msix(bp->pdev); - goto load_error; + goto load_error1; } + printk(KERN_INFO PFX "%s: using MSI-X\n", bp->dev->name); } else { bnx2x_ack_int(bp); rc = bnx2x_req_irq(bp); if (rc) { - BNX2X_ERR("IRQ request failed, aborting\n"); - goto load_error; + BNX2X_ERR("IRQ request failed rc %d, aborting\n", rc); + goto load_error1; } } - for_each_queue(bp, i) - netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi), - bnx2x_poll, 128); + /* Send LOAD_REQUEST command to MCP + Returns the type of LOAD command: + if it is the first port to be initialized + common blocks should be initialized, otherwise - not + */ + if (!BP_NOMCP(bp)) { + load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ); + if (!load_code) { + BNX2X_ERR("MCP response failure, aborting\n"); + rc = -EBUSY; + goto load_error2; + } + if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED) { + rc = -EBUSY; /* other port in diagnostic mode */ + goto load_error2; + } + + } else { + int port = BP_PORT(bp); + + DP(NETIF_MSG_IFUP, "NO MCP load counts before us %d, %d, %d\n", + load_count[0], load_count[1], load_count[2]); + load_count[0]++; + load_count[1 + port]++; + DP(NETIF_MSG_IFUP, "NO MCP new load counts %d, %d, %d\n", + load_count[0], load_count[1], load_count[2]); + if (load_count[0] == 1) + load_code = FW_MSG_CODE_DRV_LOAD_COMMON; + else if (load_count[1 + port] == 1) + load_code = FW_MSG_CODE_DRV_LOAD_PORT; + else + load_code = FW_MSG_CODE_DRV_LOAD_FUNCTION; + } + + if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) || + (load_code == FW_MSG_CODE_DRV_LOAD_PORT)) + bp->port.pmf = 1; + else + bp->port.pmf = 0; + DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf); /* Initialize HW */ rc = bnx2x_init_hw(bp, load_code); if (rc) { BNX2X_ERR("HW init failed, aborting\n"); - goto load_int_disable; + goto load_error2; } /* Setup NIC internals and enable interrupts */ @@ -6445,7 +6464,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) if (!load_code) { BNX2X_ERR("MCP response failure, aborting\n"); rc = -EBUSY; - goto load_rings_free; + goto load_error3; } } @@ -6454,7 +6473,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) rc = bnx2x_setup_leading(bp); if (rc) { BNX2X_ERR("Setup leading failed!\n"); - goto load_netif_stop; + goto load_error3; } if (CHIP_IS_E1H(bp)) @@ -6467,7 +6486,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) for_each_nondefault_queue(bp, i) { rc = bnx2x_setup_multi(bp, i); if (rc) - goto load_netif_stop; + goto load_error3; } if (CHIP_IS_E1(bp)) @@ -6483,18 +6502,18 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) case LOAD_NORMAL: /* Tx queue should be only reenabled */ netif_wake_queue(bp->dev); + /* Initialize the receive filter. */ bnx2x_set_rx_mode(bp->dev); break; case LOAD_OPEN: netif_start_queue(bp->dev); + /* Initialize the receive filter. */ bnx2x_set_rx_mode(bp->dev); - if (bp->flags & USING_MSIX_FLAG) - printk(KERN_INFO PFX "%s: using MSI-X\n", - bp->dev->name); break; case LOAD_DIAG: + /* Initialize the receive filter. */ bnx2x_set_rx_mode(bp->dev); bp->state = BNX2X_STATE_DIAG; break; @@ -6512,20 +6531,23 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) return 0; -load_netif_stop: - bnx2x_napi_disable(bp); -load_rings_free: +load_error3: + bnx2x_int_disable_sync(bp, 1); + if (!BP_NOMCP(bp)) { + bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP); + bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE); + } + bp->port.pmf = 0; /* Free SKBs, SGEs, TPA pool and driver internals */ bnx2x_free_skbs(bp); for_each_queue(bp, i) bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE); -load_int_disable: - bnx2x_int_disable_sync(bp, 1); +load_error2: /* Release IRQs */ bnx2x_free_irq(bp); -load_error: +load_error1: + bnx2x_napi_disable(bp); bnx2x_free_mem(bp); - bp->port.pmf = 0; /* TBD we really need to reset the chip if we want to recover from this */ -- cgit v1.2.3 From 6eccabb301d442e6106ecc84b07a976c2816d9fb Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Thu, 22 Jan 2009 03:37:48 +0000 Subject: bnx2x: Carrier off first call Call carrier off should not be called after register_netdev since after register netdev open can be called at any time followed by an interrupt that will set it to carrier_on and the probe will resume control and set it to off Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 707c4bbe46a4..fbd71659cca6 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -9827,6 +9827,8 @@ static int bnx2x_open(struct net_device *dev) { struct bnx2x *bp = netdev_priv(dev); + netif_carrier_off(dev); + bnx2x_set_power_state(bp, PCI_D0); return bnx2x_nic_load(bp, LOAD_OPEN); @@ -10332,8 +10334,6 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, goto init_one_exit; } - netif_carrier_off(dev); - bp->common.name = board_info[ent->driver_data].name; printk(KERN_INFO "%s: %s (%c%d) PCI-E x%d %s found at mem %lx," " IRQ %d, ", dev->name, bp->common.name, -- cgit v1.2.3 From 7cde1c8b79f913a0158bae4f4c612de2cb98e7e4 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Thu, 22 Jan 2009 06:01:25 +0000 Subject: bnx2x: Calling napi_del rmmod might hang without this patch since the reference counter is not going down Signed-off-by: Yitchak Gertner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index fbd71659cca6..71fbf2dbda3b 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -6547,6 +6547,8 @@ load_error2: bnx2x_free_irq(bp); load_error1: bnx2x_napi_disable(bp); + for_each_queue(bp, i) + netif_napi_del(&bnx2x_fp(bp, i, napi)); bnx2x_free_mem(bp); /* TBD we really need to reset the chip @@ -6855,6 +6857,8 @@ unload_error: bnx2x_free_skbs(bp); for_each_queue(bp, i) bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE); + for_each_queue(bp, i) + netif_napi_del(&bnx2x_fp(bp, i, napi)); bnx2x_free_mem(bp); bp->state = BNX2X_STATE_CLOSED; @@ -10481,6 +10485,8 @@ static int bnx2x_eeh_nic_unload(struct bnx2x *bp) bnx2x_free_skbs(bp); for_each_queue(bp, i) bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE); + for_each_queue(bp, i) + netif_napi_del(&bnx2x_fp(bp, i, napi)); bnx2x_free_mem(bp); bp->state = BNX2X_STATE_CLOSED; -- cgit v1.2.3 From 5650d9d4cbf3898d3f9725ccad5dfca6bc086324 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Thu, 22 Jan 2009 06:01:29 +0000 Subject: bnx2x: Missing rmb when waiting for FW response Waiting for the FW to response requires a memory barrier Signed-off-by: Michal Kalderon Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 71fbf2dbda3b..f71b8a5872b3 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -6622,6 +6622,7 @@ static int bnx2x_stop_leading(struct bnx2x *bp) } cnt--; msleep(1); + rmb(); /* Refresh the dsb_sp_prod */ } bp->state = BNX2X_STATE_CLOSING_WAIT4_UNLOAD; bp->fp[0].state = BNX2X_FP_STATE_CLOSED; -- cgit v1.2.3 From 3910c8ae44c59cebed721e33aa496f0a385b4e03 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Thu, 22 Jan 2009 06:01:32 +0000 Subject: bnx2x: loopback test failure A link change interrupt might be queued and activated after the loopback was set and it will cause the loopback to fail. The PHY lock should be kept until the loopback test is over. That implies that the bnx2x_test_link should used within the loopback function and not bnx2x_wait_for_link since that function also takes the PHY link Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index f71b8a5872b3..d95714f780f3 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -8750,18 +8750,17 @@ static int bnx2x_run_loopback(struct bnx2x *bp, int loopback_mode, u8 link_up) if (loopback_mode == BNX2X_MAC_LOOPBACK) { bp->link_params.loopback_mode = LOOPBACK_BMAC; - bnx2x_acquire_phy_lock(bp); bnx2x_phy_init(&bp->link_params, &bp->link_vars); - bnx2x_release_phy_lock(bp); } else if (loopback_mode == BNX2X_PHY_LOOPBACK) { + u16 cnt = 1000; bp->link_params.loopback_mode = LOOPBACK_XGXS_10; - bnx2x_acquire_phy_lock(bp); bnx2x_phy_init(&bp->link_params, &bp->link_vars); - bnx2x_release_phy_lock(bp); /* wait until link state is restored */ - bnx2x_wait_for_link(bp, link_up); - + if (link_up) + while (cnt-- && bnx2x_test_link(&bp->link_params, + &bp->link_vars)) + msleep(10); } else return -EINVAL; @@ -8867,6 +8866,7 @@ static int bnx2x_test_loopback(struct bnx2x *bp, u8 link_up) return BNX2X_LOOPBACK_FAILED; bnx2x_netif_stop(bp, 1); + bnx2x_acquire_phy_lock(bp); if (bnx2x_run_loopback(bp, BNX2X_MAC_LOOPBACK, link_up)) { DP(NETIF_MSG_PROBE, "MAC loopback failed\n"); @@ -8878,6 +8878,7 @@ static int bnx2x_test_loopback(struct bnx2x *bp, u8 link_up) rc |= BNX2X_PHY_LOOPBACK_FAILED; } + bnx2x_release_phy_lock(bp); bnx2x_netif_start(bp); return rc; -- cgit v1.2.3 From 5422a2257350d984094e655b2361abed51a9ddc1 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Thu, 22 Jan 2009 06:01:37 +0000 Subject: bnx2x: Version Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index d95714f780f3..4b84f6ce5ed2 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -57,8 +57,8 @@ #include "bnx2x.h" #include "bnx2x_init.h" -#define DRV_MODULE_VERSION "1.45.24" -#define DRV_MODULE_RELDATE "2009/01/14" +#define DRV_MODULE_VERSION "1.45.25" +#define DRV_MODULE_RELDATE "2009/01/22" #define BNX2X_BC_VER 0x040200 /* Time in jiffies before concluding the transmitter is hung */ -- cgit v1.2.3 From 6f051069d8a2045666055e3020ae8a7dec9762e0 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 22 Jan 2009 13:51:24 -0800 Subject: phylib: Fix oops in suspend/resume paths Suspend/resume routines check for phydrv != NULL, but that is wrong because "phydrv" comes from container_of(drv). If drv is NULL, then container_of(drv) will return non-NULL result, and the checks won't work. The Freescale TBI PHYs are driver-less, so "drv" is NULL, and that leads to the following oops: Unable to handle kernel paging request for data at address 0xffffffe4 Faulting instruction address: 0xc0215554 Oops: Kernel access of bad area, sig: 11 [#1] [...] NIP [c0215554] mdio_bus_suspend+0x34/0x70 LR [c01cc508] suspend_device+0x258/0x2bc Call Trace: [cfad3da0] [cfad3db8] 0xcfad3db8 (unreliable) [cfad3db0] [c01cc508] suspend_device+0x258/0x2bc [cfad3dd0] [c01cc62c] dpm_suspend+0xc0/0x140 [cfad3e20] [c01cc6f4] device_suspend+0x48/0x5c [cfad3e40] [c0068dd8] suspend_devices_and_enter+0x8c/0x148 [cfad3e60] [c00690f8] enter_state+0x100/0x118 [cfad3e80] [c00691c0] state_store+0xb0/0xe4 [cfad3ea0] [c018c938] kobj_attr_store+0x24/0x3c [cfad3eb0] [c00ea9a8] flush_write_buffer+0x58/0x7c [cfad3ed0] [c00eadf0] sysfs_write_file+0x58/0xa0 [cfad3ef0] [c009e810] vfs_write+0xb4/0x16c [cfad3f10] [c009ed40] sys_write+0x4c/0x90 [cfad3f40] [c0014954] ret_from_syscall+0x0/0x38 [...] This patch fixes the issue, plus removes unneeded parentheses and fixes indentation level in mdio_bus_suspend(). Signed-off-by: Anton Vorontsov Signed-off-by: David S. Miller --- drivers/net/phy/mdio_bus.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 11adf6ed4628..811a637695ca 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -296,9 +296,8 @@ static int mdio_bus_suspend(struct device * dev, pm_message_t state) struct phy_driver *phydrv = to_phy_driver(drv); struct phy_device *phydev = to_phy_device(dev); - if ((!device_may_wakeup(phydev->dev.parent)) && - (phydrv && phydrv->suspend)) - ret = phydrv->suspend(phydev); + if (drv && phydrv->suspend && !device_may_wakeup(phydev->dev.parent)) + ret = phydrv->suspend(phydev); return ret; } @@ -310,8 +309,7 @@ static int mdio_bus_resume(struct device * dev) struct phy_driver *phydrv = to_phy_driver(drv); struct phy_device *phydev = to_phy_device(dev); - if ((!device_may_wakeup(phydev->dev.parent)) && - (phydrv && phydrv->resume)) + if (drv && phydrv->resume && !device_may_wakeup(phydev->dev.parent)) ret = phydrv->resume(phydev); return ret; -- cgit v1.2.3 From c64d2a9afbccd0aecb122d108770a407fe7b7e3f Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Thu, 22 Jan 2009 14:07:43 -0800 Subject: phy: Add suspend/resume support to SMSC PHYs All supported SMSC PHYs implement the standard "power down" bit 11 of BMCR, so this patch adds support using the generic genphy_{suspend,resume} functions. Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/phy/smsc.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c index c05d38d46350..1387187543e4 100644 --- a/drivers/net/phy/smsc.c +++ b/drivers/net/phy/smsc.c @@ -81,6 +81,9 @@ static struct phy_driver lan83c185_driver = { .ack_interrupt = smsc_phy_ack_interrupt, .config_intr = smsc_phy_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, + .driver = { .owner = THIS_MODULE, } }; @@ -102,6 +105,9 @@ static struct phy_driver lan8187_driver = { .ack_interrupt = smsc_phy_ack_interrupt, .config_intr = smsc_phy_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, + .driver = { .owner = THIS_MODULE, } }; @@ -123,6 +129,9 @@ static struct phy_driver lan8700_driver = { .ack_interrupt = smsc_phy_ack_interrupt, .config_intr = smsc_phy_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, + .driver = { .owner = THIS_MODULE, } }; @@ -144,6 +153,9 @@ static struct phy_driver lan911x_int_driver = { .ack_interrupt = smsc_phy_ack_interrupt, .config_intr = smsc_phy_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, + .driver = { .owner = THIS_MODULE, } }; -- cgit v1.2.3 From 1058a75f07b9bb8323fb5197be5526220f8b75cf Mon Sep 17 00:00:00 2001 From: Dan Magenheimer Date: Thu, 22 Jan 2009 14:36:08 -0800 Subject: xen: actually release memory when shrinking domain Fix this: > It appears that in the upstream balloon driver, > the call to HYPERVISOR_update_va_mapping is missing > from decrease_reservation. I think as a result, > the balloon driver is eating memory but not > releasing it to Xen, thus rendering the balloon > driver essentially useless. (Can be observed via xentop.) Signed-off-by: Dan Magenheimer Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- drivers/xen/balloon.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index 8dc7109d61b7..8069d520c460 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -298,6 +298,11 @@ static int decrease_reservation(unsigned long nr_pages) frame_list[i] = pfn_to_mfn(pfn); scrub_page(page); + + ret = HYPERVISOR_update_va_mapping( + (unsigned long)__va(pfn << PAGE_SHIFT), + __pte_ma(0), 0); + BUG_ON(ret); } /* Ensure that ballooned highmem pages don't have kmaps. */ -- cgit v1.2.3 From ff4ce8c332859508dc97826ab8b7f42bb9c212c9 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Fri, 23 Jan 2009 16:26:21 +0000 Subject: xen: handle highmem pages correctly when shrinking a domain Commit 1058a75f07b9bb8323fb5197be5526220f8b75cf ("xen: actually release memory when shrinking domain") causes a crash if the page being released is a highmem page. If a page is highmem then there is no need to unmap it. Signed-off-by: Ian Campbell Acked-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- drivers/xen/balloon.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index 8069d520c460..2ba8f95516a0 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -299,10 +299,13 @@ static int decrease_reservation(unsigned long nr_pages) scrub_page(page); - ret = HYPERVISOR_update_va_mapping( - (unsigned long)__va(pfn << PAGE_SHIFT), - __pte_ma(0), 0); - BUG_ON(ret); + if (!PageHighMem(page)) { + ret = HYPERVISOR_update_va_mapping( + (unsigned long)__va(pfn << PAGE_SHIFT), + __pte_ma(0), 0); + BUG_ON(ret); + } + } /* Ensure that ballooned highmem pages don't have kmaps. */ -- cgit v1.2.3 From b4068a80492022848c11123bf485aff5c902c583 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Tue, 20 Jan 2009 23:11:21 +0100 Subject: p54usb: fix packet loss with first generation devices Artur Skawina confirmed that the first generation devices needs the same URB_ZERO_PACKET flag, in oder to finish the pending transfer properly. The second generation has been successfully fixed by "p54usb: fix random traffic stalls (LM87)" (43af18f06d5) Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54usb.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index 4487cc5c928b..5de2ebfb28c7 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -229,6 +229,8 @@ static void p54u_tx_3887(struct ieee80211_hw *dev, struct sk_buff *skb) usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), skb->data, skb->len, FREE_AFTER_TX(skb) ? p54u_tx_cb : p54u_tx_dummy_cb, skb); + addr_urb->transfer_flags |= URB_ZERO_PACKET; + data_urb->transfer_flags |= URB_ZERO_PACKET; usb_anchor_urb(addr_urb, &priv->submitted); err = usb_submit_urb(addr_urb, GFP_ATOMIC); @@ -237,7 +239,7 @@ static void p54u_tx_3887(struct ieee80211_hw *dev, struct sk_buff *skb) goto out; } - usb_anchor_urb(addr_urb, &priv->submitted); + usb_anchor_urb(data_urb, &priv->submitted); err = usb_submit_urb(data_urb, GFP_ATOMIC); if (err) usb_unanchor_urb(data_urb); @@ -332,12 +334,13 @@ static void p54u_tx_net2280(struct ieee80211_hw *dev, struct sk_buff *skb) * free what's inside the transfer_buffer after the callback routine * has completed. */ - int_urb->transfer_flags |= URB_FREE_BUFFER; + int_urb->transfer_flags |= URB_FREE_BUFFER | URB_ZERO_PACKET; usb_fill_bulk_urb(data_urb, priv->udev, usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), hdr, skb->len + sizeof(*hdr), FREE_AFTER_TX(skb) ? p54u_tx_cb : p54u_tx_dummy_cb, skb); + data_urb->transfer_flags |= URB_ZERO_PACKET; usb_anchor_urb(int_urb, &priv->submitted); err = usb_submit_urb(int_urb, GFP_ATOMIC); -- cgit v1.2.3 From c338ba3ca5bef2df2082d9e8d336ff7b2880c326 Mon Sep 17 00:00:00 2001 From: "Abbas, Mohamed" Date: Wed, 21 Jan 2009 10:58:02 -0800 Subject: iwlwifi: fix rs_get_rate WARN_ON() In ieee80211_sta structure there is u64 supp_rates[IEEE80211_NUM_BANDS] this is filled with all support rate from assoc_resp. If we associate with G-band AP only supp_rates of G-band will be set the other band supp_rates will be set to 0. If the user type this command this will cause mac80211 to set to new channel, mac80211 does not disassociate in setting new channel, so the active band is now A-band. then in handling the new essid mac80211 will kick in the assoc steps which involve sending disassociation frame. in this mac80211 will WARN_ON sta->supp_rates[A_BAND] == 0. This fixes: http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1822 http://www.kerneloops.org/searchweek.php?search=rs_get_rate Signed-off-by: mohamed abbas Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-3945-rs.c | 14 +++++++++++--- drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 14 ++++++++++++-- 2 files changed, 23 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c index 9b60a0c5de5f..21c841847d88 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c @@ -638,12 +638,16 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, s8 scale_action = 0; unsigned long flags; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - u16 fc, rate_mask; + u16 fc; + u16 rate_mask = 0; struct iwl3945_priv *priv = (struct iwl3945_priv *)priv_r; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); IWL_DEBUG_RATE("enter\n"); + if (sta) + rate_mask = sta->supp_rates[sband->band]; + /* Send management frames and broadcast/multicast data using lowest * rate. */ fc = le16_to_cpu(hdr->frame_control); @@ -651,11 +655,15 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, is_multicast_ether_addr(hdr->addr1) || !sta || !priv_sta) { IWL_DEBUG_RATE("leave: No STA priv data to update!\n"); - info->control.rates[0].idx = rate_lowest_index(sband, sta); + if (!rate_mask) + info->control.rates[0].idx = + rate_lowest_index(sband, NULL); + else + info->control.rates[0].idx = + rate_lowest_index(sband, sta); return; } - rate_mask = sta->supp_rates[sband->band]; index = min(rs_sta->last_txrate_idx & 0xffff, IWL_RATE_COUNT - 1); if (sband->band == IEEE80211_BAND_5GHZ) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index f3f17929ca0b..27f50471aed8 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -944,7 +944,8 @@ static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband, } /* See if there's a better rate or modulation mode to try. */ - rs_rate_scale_perform(priv, hdr, sta, lq_sta); + if (sta && sta->supp_rates[sband->band]) + rs_rate_scale_perform(priv, hdr, sta, lq_sta); out: return; } @@ -2101,14 +2102,23 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta, struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct iwl_lq_sta *lq_sta = priv_sta; int rate_idx; + u64 mask_bit = 0; IWL_DEBUG_RATE_LIMIT("rate scale calculate new rate for skb\n"); + if (sta) + mask_bit = sta->supp_rates[sband->band]; + /* Send management frames and broadcast/multicast data using lowest * rate. */ if (!ieee80211_is_data(hdr->frame_control) || is_multicast_ether_addr(hdr->addr1) || !sta || !lq_sta) { - info->control.rates[0].idx = rate_lowest_index(sband, sta); + if (!mask_bit) + info->control.rates[0].idx = + rate_lowest_index(sband, NULL); + else + info->control.rates[0].idx = + rate_lowest_index(sband, sta); return; } -- cgit v1.2.3 From 2fcbab044a3faf4d4a6e269148dd1f188303b206 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Fri, 23 Jan 2009 11:46:32 -0600 Subject: rtl8187: Add termination packet to prevent stall The RTL8187 and RTL8187B devices can stall unless an explicit termination packet is sent. Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtl818x/rtl8187_dev.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c index 6ad6bac37706..22bc07ef2f37 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c @@ -273,6 +273,7 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb) usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, ep), buf, skb->len, rtl8187_tx_cb, skb); + urb->transfer_flags |= URB_ZERO_PACKET; usb_anchor_urb(urb, &priv->anchored); rc = usb_submit_urb(urb, GFP_ATOMIC); if (rc < 0) { -- cgit v1.2.3 From 953a7e8476bbd7367cebdb868c326ba42968bc13 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 18 Jan 2009 12:52:38 +0000 Subject: [ARM] omap: ensure OMAP drivers pass a struct device to clk_get() Signed-off-by: Russell King --- drivers/char/hw_random/omap-rng.c | 2 +- drivers/usb/host/ohci-omap.c | 6 +++--- drivers/video/omap/lcdc.c | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c index d4e7dca06e4f..ba68a4671cb5 100644 --- a/drivers/char/hw_random/omap-rng.c +++ b/drivers/char/hw_random/omap-rng.c @@ -102,7 +102,7 @@ static int __init omap_rng_probe(struct platform_device *pdev) return -EBUSY; if (cpu_is_omap24xx()) { - rng_ick = clk_get(NULL, "rng_ick"); + rng_ick = clk_get(&pdev->dev, "rng_ick"); if (IS_ERR(rng_ick)) { dev_err(&pdev->dev, "Could not get rng_ick\n"); ret = PTR_ERR(rng_ick); diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 4bbddb73abd9..f3aaba35e912 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -315,14 +315,14 @@ static int usb_hcd_omap_probe (const struct hc_driver *driver, return -ENODEV; } - usb_host_ck = clk_get(0, "usb_hhc_ck"); + usb_host_ck = clk_get(&pdev->dev, "usb_hhc_ck"); if (IS_ERR(usb_host_ck)) return PTR_ERR(usb_host_ck); if (!cpu_is_omap15xx()) - usb_dc_ck = clk_get(0, "usb_dc_ck"); + usb_dc_ck = clk_get(&pdev->dev, "usb_dc_ck"); else - usb_dc_ck = clk_get(0, "lb_ck"); + usb_dc_ck = clk_get(&pdev->dev, "lb_ck"); if (IS_ERR(usb_dc_ck)) { clk_put(usb_host_ck); diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c index 6e2ea7518761..ab3949256677 100644 --- a/drivers/video/omap/lcdc.c +++ b/drivers/video/omap/lcdc.c @@ -800,14 +800,14 @@ static int omap_lcdc_init(struct omapfb_device *fbdev, int ext_mode, /* FIXME: * According to errata some platforms have a clock rate limitiation */ - lcdc.lcd_ck = clk_get(NULL, "lcd_ck"); + lcdc.lcd_ck = clk_get(fbdev->dev, "lcd_ck"); if (IS_ERR(lcdc.lcd_ck)) { dev_err(fbdev->dev, "unable to access LCD clock\n"); r = PTR_ERR(lcdc.lcd_ck); goto fail0; } - tc_ck = clk_get(NULL, "tc_ck"); + tc_ck = clk_get(fbdev->dev, "tc_ck"); if (IS_ERR(tc_ck)) { dev_err(fbdev->dev, "unable to access TC clock\n"); r = PTR_ERR(tc_ck); -- cgit v1.2.3 From 7ad14f83d335bc042baa21d710b4ea0918965ffe Mon Sep 17 00:00:00 2001 From: Ramax Lo Date: Wed, 14 Jan 2009 02:13:47 +0100 Subject: [ARM] 5365/1: s3cmci: Use new include path of dma.h Since dma.h has been moved to arch/arm/mach-s3c2410/include/mach, use the new include path. Signed-off-by: Ramax Lo Acked-by: Ben Dooks Signed-off-by: Russell King --- drivers/mmc/host/s3cmci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index fcc98a4cce3c..35a98eec7414 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -20,7 +20,7 @@ #include #include -#include +#include #include #include -- cgit v1.2.3 From 02e0746ecc0e72482fe6f350cbb8b65d1d5fc40a Mon Sep 17 00:00:00 2001 From: Jean-Christop PLAGNIOL-VILLARD Date: Fri, 23 Jan 2009 10:06:07 +0100 Subject: [ARM] 5370/1: at91: fix rm9200 watchdog Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Russell King --- drivers/watchdog/at91rm9200_wdt.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c index 993e5f52afef..5531691f46ea 100644 --- a/drivers/watchdog/at91rm9200_wdt.c +++ b/drivers/watchdog/at91rm9200_wdt.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3 From a45c6cb816474cefe56059fce422a9bdcd77e0dc Mon Sep 17 00:00:00 2001 From: Madhusudhan Chikkature Date: Fri, 23 Jan 2009 01:05:23 +0100 Subject: [ARM] 5369/1: omap mmc: Add new omap hsmmc controller for 2430 and 34xx, v3 Add omap hsmmc controller for 2430 and 34xx. Note that this controller has different registers compared to the earlier omap MMC controller, so sharing code currently is not possible. Various updates and fixes from linux-omap list have been merged into this patch. Signed-off-by: Madhusudhan Chikkature Acked-by: Pierre Ossman Signed-off-by: Tony Lindgren Signed-off-by: Russell King --- drivers/mmc/host/Kconfig | 10 + drivers/mmc/host/Makefile | 1 + drivers/mmc/host/omap_hsmmc.c | 1242 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1253 insertions(+) create mode 100644 drivers/mmc/host/omap_hsmmc.c (limited to 'drivers') diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index dfa585f7feaf..0efa390978bd 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -76,6 +76,16 @@ config MMC_OMAP If unsure, say N. +config MMC_OMAP_HS + tristate "TI OMAP High Speed Multimedia Card Interface support" + depends on ARCH_OMAP2430 || ARCH_OMAP3 + help + This selects the TI OMAP High Speed Multimedia card Interface. + If you have an OMAP2430 or OMAP3 board with a Multimedia Card slot, + say Y or M here. + + If unsure, say N. + config MMC_WBSD tristate "Winbond W83L51xD SD/MMC Card Interface support" depends on ISA_DMA_API diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index f4853288bbb1..98cab84829b8 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o obj-$(CONFIG_MMC_WBSD) += wbsd.o obj-$(CONFIG_MMC_AU1X) += au1xmmc.o obj-$(CONFIG_MMC_OMAP) += omap.o +obj-$(CONFIG_MMC_OMAP_HS) += omap_hsmmc.o obj-$(CONFIG_MMC_AT91) += at91_mci.o obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c new file mode 100644 index 000000000000..db37490f67ec --- /dev/null +++ b/drivers/mmc/host/omap_hsmmc.c @@ -0,0 +1,1242 @@ +/* + * drivers/mmc/host/omap_hsmmc.c + * + * Driver for OMAP2430/3430 MMC controller. + * + * Copyright (C) 2007 Texas Instruments. + * + * Authors: + * Syed Mohammed Khasim + * Madhusudhan + * Mohit Jalori + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* OMAP HSMMC Host Controller Registers */ +#define OMAP_HSMMC_SYSCONFIG 0x0010 +#define OMAP_HSMMC_CON 0x002C +#define OMAP_HSMMC_BLK 0x0104 +#define OMAP_HSMMC_ARG 0x0108 +#define OMAP_HSMMC_CMD 0x010C +#define OMAP_HSMMC_RSP10 0x0110 +#define OMAP_HSMMC_RSP32 0x0114 +#define OMAP_HSMMC_RSP54 0x0118 +#define OMAP_HSMMC_RSP76 0x011C +#define OMAP_HSMMC_DATA 0x0120 +#define OMAP_HSMMC_HCTL 0x0128 +#define OMAP_HSMMC_SYSCTL 0x012C +#define OMAP_HSMMC_STAT 0x0130 +#define OMAP_HSMMC_IE 0x0134 +#define OMAP_HSMMC_ISE 0x0138 +#define OMAP_HSMMC_CAPA 0x0140 + +#define VS18 (1 << 26) +#define VS30 (1 << 25) +#define SDVS18 (0x5 << 9) +#define SDVS30 (0x6 << 9) +#define SDVSCLR 0xFFFFF1FF +#define SDVSDET 0x00000400 +#define AUTOIDLE 0x1 +#define SDBP (1 << 8) +#define DTO 0xe +#define ICE 0x1 +#define ICS 0x2 +#define CEN (1 << 2) +#define CLKD_MASK 0x0000FFC0 +#define CLKD_SHIFT 6 +#define DTO_MASK 0x000F0000 +#define DTO_SHIFT 16 +#define INT_EN_MASK 0x307F0033 +#define INIT_STREAM (1 << 1) +#define DP_SELECT (1 << 21) +#define DDIR (1 << 4) +#define DMA_EN 0x1 +#define MSBS (1 << 5) +#define BCE (1 << 1) +#define FOUR_BIT (1 << 1) +#define CC 0x1 +#define TC 0x02 +#define OD 0x1 +#define ERR (1 << 15) +#define CMD_TIMEOUT (1 << 16) +#define DATA_TIMEOUT (1 << 20) +#define CMD_CRC (1 << 17) +#define DATA_CRC (1 << 21) +#define CARD_ERR (1 << 28) +#define STAT_CLEAR 0xFFFFFFFF +#define INIT_STREAM_CMD 0x00000000 +#define DUAL_VOLT_OCR_BIT 7 +#define SRC (1 << 25) +#define SRD (1 << 26) + +/* + * FIXME: Most likely all the data using these _DEVID defines should come + * from the platform_data, or implemented in controller and slot specific + * functions. + */ +#define OMAP_MMC1_DEVID 0 +#define OMAP_MMC2_DEVID 1 + +#define OMAP_MMC_DATADIR_NONE 0 +#define OMAP_MMC_DATADIR_READ 1 +#define OMAP_MMC_DATADIR_WRITE 2 +#define MMC_TIMEOUT_MS 20 +#define OMAP_MMC_MASTER_CLOCK 96000000 +#define DRIVER_NAME "mmci-omap-hs" + +/* + * One controller can have multiple slots, like on some omap boards using + * omap.c controller driver. Luckily this is not currently done on any known + * omap_hsmmc.c device. + */ +#define mmc_slot(host) (host->pdata->slots[host->slot_id]) + +/* + * MMC Host controller read/write API's + */ +#define OMAP_HSMMC_READ(base, reg) \ + __raw_readl((base) + OMAP_HSMMC_##reg) + +#define OMAP_HSMMC_WRITE(base, reg, val) \ + __raw_writel((val), (base) + OMAP_HSMMC_##reg) + +struct mmc_omap_host { + struct device *dev; + struct mmc_host *mmc; + struct mmc_request *mrq; + struct mmc_command *cmd; + struct mmc_data *data; + struct clk *fclk; + struct clk *iclk; + struct clk *dbclk; + struct semaphore sem; + struct work_struct mmc_carddetect_work; + void __iomem *base; + resource_size_t mapbase; + unsigned int id; + unsigned int dma_len; + unsigned int dma_dir; + unsigned char bus_mode; + unsigned char datadir; + u32 *buffer; + u32 bytesleft; + int suspended; + int irq; + int carddetect; + int use_dma, dma_ch; + int initstr; + int slot_id; + int dbclk_enabled; + struct omap_mmc_platform_data *pdata; +}; + +/* + * Stop clock to the card + */ +static void omap_mmc_stop_clock(struct mmc_omap_host *host) +{ + OMAP_HSMMC_WRITE(host->base, SYSCTL, + OMAP_HSMMC_READ(host->base, SYSCTL) & ~CEN); + if ((OMAP_HSMMC_READ(host->base, SYSCTL) & CEN) != 0x0) + dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stoped\n"); +} + +/* + * Send init stream sequence to card + * before sending IDLE command + */ +static void send_init_stream(struct mmc_omap_host *host) +{ + int reg = 0; + unsigned long timeout; + + disable_irq(host->irq); + OMAP_HSMMC_WRITE(host->base, CON, + OMAP_HSMMC_READ(host->base, CON) | INIT_STREAM); + OMAP_HSMMC_WRITE(host->base, CMD, INIT_STREAM_CMD); + + timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS); + while ((reg != CC) && time_before(jiffies, timeout)) + reg = OMAP_HSMMC_READ(host->base, STAT) & CC; + + OMAP_HSMMC_WRITE(host->base, CON, + OMAP_HSMMC_READ(host->base, CON) & ~INIT_STREAM); + enable_irq(host->irq); +} + +static inline +int mmc_omap_cover_is_closed(struct mmc_omap_host *host) +{ + int r = 1; + + if (host->pdata->slots[host->slot_id].get_cover_state) + r = host->pdata->slots[host->slot_id].get_cover_state(host->dev, + host->slot_id); + return r; +} + +static ssize_t +mmc_omap_show_cover_switch(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev); + struct mmc_omap_host *host = mmc_priv(mmc); + + return sprintf(buf, "%s\n", mmc_omap_cover_is_closed(host) ? "closed" : + "open"); +} + +static DEVICE_ATTR(cover_switch, S_IRUGO, mmc_omap_show_cover_switch, NULL); + +static ssize_t +mmc_omap_show_slot_name(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev); + struct mmc_omap_host *host = mmc_priv(mmc); + struct omap_mmc_slot_data slot = host->pdata->slots[host->slot_id]; + + return sprintf(buf, "slot:%s\n", slot.name); +} + +static DEVICE_ATTR(slot_name, S_IRUGO, mmc_omap_show_slot_name, NULL); + +/* + * Configure the response type and send the cmd. + */ +static void +mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd, + struct mmc_data *data) +{ + int cmdreg = 0, resptype = 0, cmdtype = 0; + + dev_dbg(mmc_dev(host->mmc), "%s: CMD%d, argument 0x%08x\n", + mmc_hostname(host->mmc), cmd->opcode, cmd->arg); + host->cmd = cmd; + + /* + * Clear status bits and enable interrupts + */ + OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR); + OMAP_HSMMC_WRITE(host->base, ISE, INT_EN_MASK); + OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK); + + if (cmd->flags & MMC_RSP_PRESENT) { + if (cmd->flags & MMC_RSP_136) + resptype = 1; + else + resptype = 2; + } + + /* + * Unlike OMAP1 controller, the cmdtype does not seem to be based on + * ac, bc, adtc, bcr. Only commands ending an open ended transfer need + * a val of 0x3, rest 0x0. + */ + if (cmd == host->mrq->stop) + cmdtype = 0x3; + + cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22); + + if (data) { + cmdreg |= DP_SELECT | MSBS | BCE; + if (data->flags & MMC_DATA_READ) + cmdreg |= DDIR; + else + cmdreg &= ~(DDIR); + } + + if (host->use_dma) + cmdreg |= DMA_EN; + + OMAP_HSMMC_WRITE(host->base, ARG, cmd->arg); + OMAP_HSMMC_WRITE(host->base, CMD, cmdreg); +} + +/* + * Notify the transfer complete to MMC core + */ +static void +mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data) +{ + host->data = NULL; + + if (host->use_dma && host->dma_ch != -1) + dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len, + host->dma_dir); + + host->datadir = OMAP_MMC_DATADIR_NONE; + + if (!data->error) + data->bytes_xfered += data->blocks * (data->blksz); + else + data->bytes_xfered = 0; + + if (!data->stop) { + host->mrq = NULL; + mmc_request_done(host->mmc, data->mrq); + return; + } + mmc_omap_start_command(host, data->stop, NULL); +} + +/* + * Notify the core about command completion + */ +static void +mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd) +{ + host->cmd = NULL; + + if (cmd->flags & MMC_RSP_PRESENT) { + if (cmd->flags & MMC_RSP_136) { + /* response type 2 */ + cmd->resp[3] = OMAP_HSMMC_READ(host->base, RSP10); + cmd->resp[2] = OMAP_HSMMC_READ(host->base, RSP32); + cmd->resp[1] = OMAP_HSMMC_READ(host->base, RSP54); + cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP76); + } else { + /* response types 1, 1b, 3, 4, 5, 6 */ + cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP10); + } + } + if (host->data == NULL || cmd->error) { + host->mrq = NULL; + mmc_request_done(host->mmc, cmd->mrq); + } +} + +/* + * DMA clean up for command errors + */ +static void mmc_dma_cleanup(struct mmc_omap_host *host) +{ + host->data->error = -ETIMEDOUT; + + if (host->use_dma && host->dma_ch != -1) { + dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, host->dma_len, + host->dma_dir); + omap_free_dma(host->dma_ch); + host->dma_ch = -1; + up(&host->sem); + } + host->data = NULL; + host->datadir = OMAP_MMC_DATADIR_NONE; +} + +/* + * Readable error output + */ +#ifdef CONFIG_MMC_DEBUG +static void mmc_omap_report_irq(struct mmc_omap_host *host, u32 status) +{ + /* --- means reserved bit without definition at documentation */ + static const char *mmc_omap_status_bits[] = { + "CC", "TC", "BGE", "---", "BWR", "BRR", "---", "---", "CIRQ", + "OBI", "---", "---", "---", "---", "---", "ERRI", "CTO", "CCRC", + "CEB", "CIE", "DTO", "DCRC", "DEB", "---", "ACE", "---", + "---", "---", "---", "CERR", "CERR", "BADA", "---", "---", "---" + }; + char res[256]; + char *buf = res; + int len, i; + + len = sprintf(buf, "MMC IRQ 0x%x :", status); + buf += len; + + for (i = 0; i < ARRAY_SIZE(mmc_omap_status_bits); i++) + if (status & (1 << i)) { + len = sprintf(buf, " %s", mmc_omap_status_bits[i]); + buf += len; + } + + dev_dbg(mmc_dev(host->mmc), "%s\n", res); +} +#endif /* CONFIG_MMC_DEBUG */ + + +/* + * MMC controller IRQ handler + */ +static irqreturn_t mmc_omap_irq(int irq, void *dev_id) +{ + struct mmc_omap_host *host = dev_id; + struct mmc_data *data; + int end_cmd = 0, end_trans = 0, status; + + if (host->cmd == NULL && host->data == NULL) { + OMAP_HSMMC_WRITE(host->base, STAT, + OMAP_HSMMC_READ(host->base, STAT)); + return IRQ_HANDLED; + } + + data = host->data; + status = OMAP_HSMMC_READ(host->base, STAT); + dev_dbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status); + + if (status & ERR) { +#ifdef CONFIG_MMC_DEBUG + mmc_omap_report_irq(host, status); +#endif + if ((status & CMD_TIMEOUT) || + (status & CMD_CRC)) { + if (host->cmd) { + if (status & CMD_TIMEOUT) { + OMAP_HSMMC_WRITE(host->base, SYSCTL, + OMAP_HSMMC_READ(host->base, + SYSCTL) | SRC); + while (OMAP_HSMMC_READ(host->base, + SYSCTL) & SRC) + ; + + host->cmd->error = -ETIMEDOUT; + } else { + host->cmd->error = -EILSEQ; + } + end_cmd = 1; + } + if (host->data) + mmc_dma_cleanup(host); + } + if ((status & DATA_TIMEOUT) || + (status & DATA_CRC)) { + if (host->data) { + if (status & DATA_TIMEOUT) + mmc_dma_cleanup(host); + else + host->data->error = -EILSEQ; + OMAP_HSMMC_WRITE(host->base, SYSCTL, + OMAP_HSMMC_READ(host->base, + SYSCTL) | SRD); + while (OMAP_HSMMC_READ(host->base, + SYSCTL) & SRD) + ; + end_trans = 1; + } + } + if (status & CARD_ERR) { + dev_dbg(mmc_dev(host->mmc), + "Ignoring card err CMD%d\n", host->cmd->opcode); + if (host->cmd) + end_cmd = 1; + if (host->data) + end_trans = 1; + } + } + + OMAP_HSMMC_WRITE(host->base, STAT, status); + + if (end_cmd || (status & CC)) + mmc_omap_cmd_done(host, host->cmd); + if (end_trans || (status & TC)) + mmc_omap_xfer_done(host, data); + + return IRQ_HANDLED; +} + +/* + * Switch MMC operating voltage + */ +static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd) +{ + u32 reg_val = 0; + int ret; + + /* Disable the clocks */ + clk_disable(host->fclk); + clk_disable(host->iclk); + clk_disable(host->dbclk); + + /* Turn the power off */ + ret = mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0); + if (ret != 0) + goto err; + + /* Turn the power ON with given VDD 1.8 or 3.0v */ + ret = mmc_slot(host).set_power(host->dev, host->slot_id, 1, vdd); + if (ret != 0) + goto err; + + clk_enable(host->fclk); + clk_enable(host->iclk); + clk_enable(host->dbclk); + + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR); + reg_val = OMAP_HSMMC_READ(host->base, HCTL); + /* + * If a MMC dual voltage card is detected, the set_ios fn calls + * this fn with VDD bit set for 1.8V. Upon card removal from the + * slot, omap_mmc_set_ios sets the VDD back to 3V on MMC_POWER_OFF. + * + * Only MMC1 supports 3.0V. MMC2 will not function if SDVS30 is + * set in HCTL. + */ + if (host->id == OMAP_MMC1_DEVID && (((1 << vdd) == MMC_VDD_32_33) || + ((1 << vdd) == MMC_VDD_33_34))) + reg_val |= SDVS30; + if ((1 << vdd) == MMC_VDD_165_195) + reg_val |= SDVS18; + + OMAP_HSMMC_WRITE(host->base, HCTL, reg_val); + + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) | SDBP); + + return 0; +err: + dev_dbg(mmc_dev(host->mmc), "Unable to switch operating voltage\n"); + return ret; +} + +/* + * Work Item to notify the core about card insertion/removal + */ +static void mmc_omap_detect(struct work_struct *work) +{ + struct mmc_omap_host *host = container_of(work, struct mmc_omap_host, + mmc_carddetect_work); + + sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch"); + if (host->carddetect) { + mmc_detect_change(host->mmc, (HZ * 200) / 1000); + } else { + OMAP_HSMMC_WRITE(host->base, SYSCTL, + OMAP_HSMMC_READ(host->base, SYSCTL) | SRD); + while (OMAP_HSMMC_READ(host->base, SYSCTL) & SRD) + ; + + mmc_detect_change(host->mmc, (HZ * 50) / 1000); + } +} + +/* + * ISR for handling card insertion and removal + */ +static irqreturn_t omap_mmc_cd_handler(int irq, void *dev_id) +{ + struct mmc_omap_host *host = (struct mmc_omap_host *)dev_id; + + host->carddetect = mmc_slot(host).card_detect(irq); + schedule_work(&host->mmc_carddetect_work); + + return IRQ_HANDLED; +} + +/* + * DMA call back function + */ +static void mmc_omap_dma_cb(int lch, u16 ch_status, void *data) +{ + struct mmc_omap_host *host = data; + + if (ch_status & OMAP2_DMA_MISALIGNED_ERR_IRQ) + dev_dbg(mmc_dev(host->mmc), "MISALIGNED_ADRS_ERR\n"); + + if (host->dma_ch < 0) + return; + + omap_free_dma(host->dma_ch); + host->dma_ch = -1; + /* + * DMA Callback: run in interrupt context. + * mutex_unlock will through a kernel warning if used. + */ + up(&host->sem); +} + +/* + * Configure dma src and destination parameters + */ +static int mmc_omap_config_dma_param(int sync_dir, struct mmc_omap_host *host, + struct mmc_data *data) +{ + if (sync_dir == 0) { + omap_set_dma_dest_params(host->dma_ch, 0, + OMAP_DMA_AMODE_CONSTANT, + (host->mapbase + OMAP_HSMMC_DATA), 0, 0); + omap_set_dma_src_params(host->dma_ch, 0, + OMAP_DMA_AMODE_POST_INC, + sg_dma_address(&data->sg[0]), 0, 0); + } else { + omap_set_dma_src_params(host->dma_ch, 0, + OMAP_DMA_AMODE_CONSTANT, + (host->mapbase + OMAP_HSMMC_DATA), 0, 0); + omap_set_dma_dest_params(host->dma_ch, 0, + OMAP_DMA_AMODE_POST_INC, + sg_dma_address(&data->sg[0]), 0, 0); + } + return 0; +} +/* + * Routine to configure and start DMA for the MMC card + */ +static int +mmc_omap_start_dma_transfer(struct mmc_omap_host *host, struct mmc_request *req) +{ + int sync_dev, sync_dir = 0; + int dma_ch = 0, ret = 0, err = 1; + struct mmc_data *data = req->data; + + /* + * If for some reason the DMA transfer is still active, + * we wait for timeout period and free the dma + */ + if (host->dma_ch != -1) { + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(100); + if (down_trylock(&host->sem)) { + omap_free_dma(host->dma_ch); + host->dma_ch = -1; + up(&host->sem); + return err; + } + } else { + if (down_trylock(&host->sem)) + return err; + } + + if (!(data->flags & MMC_DATA_WRITE)) { + host->dma_dir = DMA_FROM_DEVICE; + if (host->id == OMAP_MMC1_DEVID) + sync_dev = OMAP24XX_DMA_MMC1_RX; + else + sync_dev = OMAP24XX_DMA_MMC2_RX; + } else { + host->dma_dir = DMA_TO_DEVICE; + if (host->id == OMAP_MMC1_DEVID) + sync_dev = OMAP24XX_DMA_MMC1_TX; + else + sync_dev = OMAP24XX_DMA_MMC2_TX; + } + + ret = omap_request_dma(sync_dev, "MMC/SD", mmc_omap_dma_cb, + host, &dma_ch); + if (ret != 0) { + dev_dbg(mmc_dev(host->mmc), + "%s: omap_request_dma() failed with %d\n", + mmc_hostname(host->mmc), ret); + return ret; + } + + host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, + data->sg_len, host->dma_dir); + host->dma_ch = dma_ch; + + if (!(data->flags & MMC_DATA_WRITE)) + mmc_omap_config_dma_param(1, host, data); + else + mmc_omap_config_dma_param(0, host, data); + + if ((data->blksz % 4) == 0) + omap_set_dma_transfer_params(dma_ch, OMAP_DMA_DATA_TYPE_S32, + (data->blksz / 4), data->blocks, OMAP_DMA_SYNC_FRAME, + sync_dev, sync_dir); + else + /* REVISIT: The MMC buffer increments only when MSB is written. + * Return error for blksz which is non multiple of four. + */ + return -EINVAL; + + omap_start_dma(dma_ch); + return 0; +} + +static void set_data_timeout(struct mmc_omap_host *host, + struct mmc_request *req) +{ + unsigned int timeout, cycle_ns; + uint32_t reg, clkd, dto = 0; + + reg = OMAP_HSMMC_READ(host->base, SYSCTL); + clkd = (reg & CLKD_MASK) >> CLKD_SHIFT; + if (clkd == 0) + clkd = 1; + + cycle_ns = 1000000000 / (clk_get_rate(host->fclk) / clkd); + timeout = req->data->timeout_ns / cycle_ns; + timeout += req->data->timeout_clks; + if (timeout) { + while ((timeout & 0x80000000) == 0) { + dto += 1; + timeout <<= 1; + } + dto = 31 - dto; + timeout <<= 1; + if (timeout && dto) + dto += 1; + if (dto >= 13) + dto -= 13; + else + dto = 0; + if (dto > 14) + dto = 14; + } + + reg &= ~DTO_MASK; + reg |= dto << DTO_SHIFT; + OMAP_HSMMC_WRITE(host->base, SYSCTL, reg); +} + +/* + * Configure block length for MMC/SD cards and initiate the transfer. + */ +static int +mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req) +{ + int ret; + host->data = req->data; + + if (req->data == NULL) { + host->datadir = OMAP_MMC_DATADIR_NONE; + OMAP_HSMMC_WRITE(host->base, BLK, 0); + return 0; + } + + OMAP_HSMMC_WRITE(host->base, BLK, (req->data->blksz) + | (req->data->blocks << 16)); + set_data_timeout(host, req); + + host->datadir = (req->data->flags & MMC_DATA_WRITE) ? + OMAP_MMC_DATADIR_WRITE : OMAP_MMC_DATADIR_READ; + + if (host->use_dma) { + ret = mmc_omap_start_dma_transfer(host, req); + if (ret != 0) { + dev_dbg(mmc_dev(host->mmc), "MMC start dma failure\n"); + return ret; + } + } + return 0; +} + +/* + * Request function. for read/write operation + */ +static void omap_mmc_request(struct mmc_host *mmc, struct mmc_request *req) +{ + struct mmc_omap_host *host = mmc_priv(mmc); + + WARN_ON(host->mrq != NULL); + host->mrq = req; + mmc_omap_prepare_data(host, req); + mmc_omap_start_command(host, req->cmd, req->data); +} + + +/* Routine to configure clock values. Exposed API to core */ +static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct mmc_omap_host *host = mmc_priv(mmc); + u16 dsor = 0; + unsigned long regval; + unsigned long timeout; + + switch (ios->power_mode) { + case MMC_POWER_OFF: + mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0); + /* + * Reset bus voltage to 3V if it got set to 1.8V earlier. + * REVISIT: If we are able to detect cards after unplugging + * a 1.8V card, this code should not be needed. + */ + if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) { + int vdd = fls(host->mmc->ocr_avail) - 1; + if (omap_mmc_switch_opcond(host, vdd) != 0) + host->mmc->ios.vdd = vdd; + } + break; + case MMC_POWER_UP: + mmc_slot(host).set_power(host->dev, host->slot_id, 1, ios->vdd); + break; + } + + switch (mmc->ios.bus_width) { + case MMC_BUS_WIDTH_4: + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) | FOUR_BIT); + break; + case MMC_BUS_WIDTH_1: + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) & ~FOUR_BIT); + break; + } + + if (host->id == OMAP_MMC1_DEVID) { + /* Only MMC1 can operate at 3V/1.8V */ + if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) && + (ios->vdd == DUAL_VOLT_OCR_BIT)) { + /* + * The mmc_select_voltage fn of the core does + * not seem to set the power_mode to + * MMC_POWER_UP upon recalculating the voltage. + * vdd 1.8v. + */ + if (omap_mmc_switch_opcond(host, ios->vdd) != 0) + dev_dbg(mmc_dev(host->mmc), + "Switch operation failed\n"); + } + } + + if (ios->clock) { + dsor = OMAP_MMC_MASTER_CLOCK / ios->clock; + if (dsor < 1) + dsor = 1; + + if (OMAP_MMC_MASTER_CLOCK / dsor > ios->clock) + dsor++; + + if (dsor > 250) + dsor = 250; + } + omap_mmc_stop_clock(host); + regval = OMAP_HSMMC_READ(host->base, SYSCTL); + regval = regval & ~(CLKD_MASK); + regval = regval | (dsor << 6) | (DTO << 16); + OMAP_HSMMC_WRITE(host->base, SYSCTL, regval); + OMAP_HSMMC_WRITE(host->base, SYSCTL, + OMAP_HSMMC_READ(host->base, SYSCTL) | ICE); + + /* Wait till the ICS bit is set */ + timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS); + while ((OMAP_HSMMC_READ(host->base, SYSCTL) & ICS) != 0x2 + && time_before(jiffies, timeout)) + msleep(1); + + OMAP_HSMMC_WRITE(host->base, SYSCTL, + OMAP_HSMMC_READ(host->base, SYSCTL) | CEN); + + if (ios->power_mode == MMC_POWER_ON) + send_init_stream(host); + + if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) + OMAP_HSMMC_WRITE(host->base, CON, + OMAP_HSMMC_READ(host->base, CON) | OD); +} + +static int omap_hsmmc_get_cd(struct mmc_host *mmc) +{ + struct mmc_omap_host *host = mmc_priv(mmc); + struct omap_mmc_platform_data *pdata = host->pdata; + + if (!pdata->slots[0].card_detect) + return -ENOSYS; + return pdata->slots[0].card_detect(pdata->slots[0].card_detect_irq); +} + +static int omap_hsmmc_get_ro(struct mmc_host *mmc) +{ + struct mmc_omap_host *host = mmc_priv(mmc); + struct omap_mmc_platform_data *pdata = host->pdata; + + if (!pdata->slots[0].get_ro) + return -ENOSYS; + return pdata->slots[0].get_ro(host->dev, 0); +} + +static struct mmc_host_ops mmc_omap_ops = { + .request = omap_mmc_request, + .set_ios = omap_mmc_set_ios, + .get_cd = omap_hsmmc_get_cd, + .get_ro = omap_hsmmc_get_ro, + /* NYET -- enable_sdio_irq */ +}; + +static int __init omap_mmc_probe(struct platform_device *pdev) +{ + struct omap_mmc_platform_data *pdata = pdev->dev.platform_data; + struct mmc_host *mmc; + struct mmc_omap_host *host = NULL; + struct resource *res; + int ret = 0, irq; + u32 hctl, capa; + + if (pdata == NULL) { + dev_err(&pdev->dev, "Platform Data is missing\n"); + return -ENXIO; + } + + if (pdata->nr_slots == 0) { + dev_err(&pdev->dev, "No Slots\n"); + return -ENXIO; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + irq = platform_get_irq(pdev, 0); + if (res == NULL || irq < 0) + return -ENXIO; + + res = request_mem_region(res->start, res->end - res->start + 1, + pdev->name); + if (res == NULL) + return -EBUSY; + + mmc = mmc_alloc_host(sizeof(struct mmc_omap_host), &pdev->dev); + if (!mmc) { + ret = -ENOMEM; + goto err; + } + + host = mmc_priv(mmc); + host->mmc = mmc; + host->pdata = pdata; + host->dev = &pdev->dev; + host->use_dma = 1; + host->dev->dma_mask = &pdata->dma_mask; + host->dma_ch = -1; + host->irq = irq; + host->id = pdev->id; + host->slot_id = 0; + host->mapbase = res->start; + host->base = ioremap(host->mapbase, SZ_4K); + + platform_set_drvdata(pdev, host); + INIT_WORK(&host->mmc_carddetect_work, mmc_omap_detect); + + mmc->ops = &mmc_omap_ops; + mmc->f_min = 400000; + mmc->f_max = 52000000; + + sema_init(&host->sem, 1); + + host->iclk = clk_get(&pdev->dev, "mmchs_ick"); + if (IS_ERR(host->iclk)) { + ret = PTR_ERR(host->iclk); + host->iclk = NULL; + goto err1; + } + host->fclk = clk_get(&pdev->dev, "mmchs_fck"); + if (IS_ERR(host->fclk)) { + ret = PTR_ERR(host->fclk); + host->fclk = NULL; + clk_put(host->iclk); + goto err1; + } + + if (clk_enable(host->fclk) != 0) { + clk_put(host->iclk); + clk_put(host->fclk); + goto err1; + } + + if (clk_enable(host->iclk) != 0) { + clk_disable(host->fclk); + clk_put(host->iclk); + clk_put(host->fclk); + goto err1; + } + + host->dbclk = clk_get(&pdev->dev, "mmchsdb_fck"); + /* + * MMC can still work without debounce clock. + */ + if (IS_ERR(host->dbclk)) + dev_warn(mmc_dev(host->mmc), "Failed to get debounce clock\n"); + else + if (clk_enable(host->dbclk) != 0) + dev_dbg(mmc_dev(host->mmc), "Enabling debounce" + " clk failed\n"); + else + host->dbclk_enabled = 1; + +#ifdef CONFIG_MMC_BLOCK_BOUNCE + mmc->max_phys_segs = 1; + mmc->max_hw_segs = 1; +#endif + mmc->max_blk_size = 512; /* Block Length at max can be 1024 */ + mmc->max_blk_count = 0xFFFF; /* No. of Blocks is 16 bits */ + mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; + mmc->max_seg_size = mmc->max_req_size; + + mmc->ocr_avail = mmc_slot(host).ocr_mask; + mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED; + + if (pdata->slots[host->slot_id].wires >= 4) + mmc->caps |= MMC_CAP_4_BIT_DATA; + + /* Only MMC1 supports 3.0V */ + if (host->id == OMAP_MMC1_DEVID) { + hctl = SDVS30; + capa = VS30 | VS18; + } else { + hctl = SDVS18; + capa = VS18; + } + + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) | hctl); + + OMAP_HSMMC_WRITE(host->base, CAPA, + OMAP_HSMMC_READ(host->base, CAPA) | capa); + + /* Set the controller to AUTO IDLE mode */ + OMAP_HSMMC_WRITE(host->base, SYSCONFIG, + OMAP_HSMMC_READ(host->base, SYSCONFIG) | AUTOIDLE); + + /* Set SD bus power bit */ + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) | SDBP); + + /* Request IRQ for MMC operations */ + ret = request_irq(host->irq, mmc_omap_irq, IRQF_DISABLED, + mmc_hostname(mmc), host); + if (ret) { + dev_dbg(mmc_dev(host->mmc), "Unable to grab HSMMC IRQ\n"); + goto err_irq; + } + + if (pdata->init != NULL) { + if (pdata->init(&pdev->dev) != 0) { + dev_dbg(mmc_dev(host->mmc), + "Unable to configure MMC IRQs\n"); + goto err_irq_cd_init; + } + } + + /* Request IRQ for card detect */ + if ((mmc_slot(host).card_detect_irq) && (mmc_slot(host).card_detect)) { + ret = request_irq(mmc_slot(host).card_detect_irq, + omap_mmc_cd_handler, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING + | IRQF_DISABLED, + mmc_hostname(mmc), host); + if (ret) { + dev_dbg(mmc_dev(host->mmc), + "Unable to grab MMC CD IRQ\n"); + goto err_irq_cd; + } + } + + OMAP_HSMMC_WRITE(host->base, ISE, INT_EN_MASK); + OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK); + + mmc_add_host(mmc); + + if (host->pdata->slots[host->slot_id].name != NULL) { + ret = device_create_file(&mmc->class_dev, &dev_attr_slot_name); + if (ret < 0) + goto err_slot_name; + } + if (mmc_slot(host).card_detect_irq && mmc_slot(host).card_detect && + host->pdata->slots[host->slot_id].get_cover_state) { + ret = device_create_file(&mmc->class_dev, + &dev_attr_cover_switch); + if (ret < 0) + goto err_cover_switch; + } + + return 0; + +err_cover_switch: + device_remove_file(&mmc->class_dev, &dev_attr_cover_switch); +err_slot_name: + mmc_remove_host(mmc); +err_irq_cd: + free_irq(mmc_slot(host).card_detect_irq, host); +err_irq_cd_init: + free_irq(host->irq, host); +err_irq: + clk_disable(host->fclk); + clk_disable(host->iclk); + clk_put(host->fclk); + clk_put(host->iclk); + if (host->dbclk_enabled) { + clk_disable(host->dbclk); + clk_put(host->dbclk); + } + +err1: + iounmap(host->base); +err: + dev_dbg(mmc_dev(host->mmc), "Probe Failed\n"); + release_mem_region(res->start, res->end - res->start + 1); + if (host) + mmc_free_host(mmc); + return ret; +} + +static int omap_mmc_remove(struct platform_device *pdev) +{ + struct mmc_omap_host *host = platform_get_drvdata(pdev); + struct resource *res; + + if (host) { + mmc_remove_host(host->mmc); + if (host->pdata->cleanup) + host->pdata->cleanup(&pdev->dev); + free_irq(host->irq, host); + if (mmc_slot(host).card_detect_irq) + free_irq(mmc_slot(host).card_detect_irq, host); + flush_scheduled_work(); + + clk_disable(host->fclk); + clk_disable(host->iclk); + clk_put(host->fclk); + clk_put(host->iclk); + if (host->dbclk_enabled) { + clk_disable(host->dbclk); + clk_put(host->dbclk); + } + + mmc_free_host(host->mmc); + iounmap(host->base); + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res) + release_mem_region(res->start, res->end - res->start + 1); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +#ifdef CONFIG_PM +static int omap_mmc_suspend(struct platform_device *pdev, pm_message_t state) +{ + int ret = 0; + struct mmc_omap_host *host = platform_get_drvdata(pdev); + + if (host && host->suspended) + return 0; + + if (host) { + ret = mmc_suspend_host(host->mmc, state); + if (ret == 0) { + host->suspended = 1; + + OMAP_HSMMC_WRITE(host->base, ISE, 0); + OMAP_HSMMC_WRITE(host->base, IE, 0); + + if (host->pdata->suspend) { + ret = host->pdata->suspend(&pdev->dev, + host->slot_id); + if (ret) + dev_dbg(mmc_dev(host->mmc), + "Unable to handle MMC board" + " level suspend\n"); + } + + if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) { + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) + & SDVSCLR); + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) + | SDVS30); + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) + | SDBP); + } + + clk_disable(host->fclk); + clk_disable(host->iclk); + clk_disable(host->dbclk); + } + + } + return ret; +} + +/* Routine to resume the MMC device */ +static int omap_mmc_resume(struct platform_device *pdev) +{ + int ret = 0; + struct mmc_omap_host *host = platform_get_drvdata(pdev); + + if (host && !host->suspended) + return 0; + + if (host) { + + ret = clk_enable(host->fclk); + if (ret) + goto clk_en_err; + + ret = clk_enable(host->iclk); + if (ret) { + clk_disable(host->fclk); + clk_put(host->fclk); + goto clk_en_err; + } + + if (clk_enable(host->dbclk) != 0) + dev_dbg(mmc_dev(host->mmc), + "Enabling debounce clk failed\n"); + + if (host->pdata->resume) { + ret = host->pdata->resume(&pdev->dev, host->slot_id); + if (ret) + dev_dbg(mmc_dev(host->mmc), + "Unmask interrupt failed\n"); + } + + /* Notify the core to resume the host */ + ret = mmc_resume_host(host->mmc); + if (ret == 0) + host->suspended = 0; + } + + return ret; + +clk_en_err: + dev_dbg(mmc_dev(host->mmc), + "Failed to enable MMC clocks during resume\n"); + return ret; +} + +#else +#define omap_mmc_suspend NULL +#define omap_mmc_resume NULL +#endif + +static struct platform_driver omap_mmc_driver = { + .probe = omap_mmc_probe, + .remove = omap_mmc_remove, + .suspend = omap_mmc_suspend, + .resume = omap_mmc_resume, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init omap_mmc_init(void) +{ + /* Register the MMC driver */ + return platform_driver_register(&omap_mmc_driver); +} + +static void __exit omap_mmc_cleanup(void) +{ + /* Unregister MMC driver */ + platform_driver_unregister(&omap_mmc_driver); +} + +module_init(omap_mmc_init); +module_exit(omap_mmc_cleanup); + +MODULE_DESCRIPTION("OMAP High Speed Multimedia Card driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRIVER_NAME); +MODULE_AUTHOR("Texas Instruments Inc"); -- cgit v1.2.3 From b7cfc9ca6a511acec529cad322eec2a6379f35f7 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 24 Jan 2009 16:48:42 +0000 Subject: [ARM] omap: watchdog: allow OMAP watchdog driver on OMAP34xx platforms The driver was updated for OMAP34xx, but the Kconfig file was missed. So this adds the missing parts from d99241c in Tony Lindgren's tree: Add watchdog timer support for TI OMAP3430. Signed-off-by: Madhusudhan Chikkature Signed-off-by: Tony Lindgren Signed-off-by: Russell King --- drivers/watchdog/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 3efa12f9ee50..09a3d5522b43 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -187,10 +187,10 @@ config EP93XX_WATCHDOG config OMAP_WATCHDOG tristate "OMAP Watchdog" - depends on ARCH_OMAP16XX || ARCH_OMAP24XX + depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX help - Support for TI OMAP1610/OMAP1710/OMAP2420 watchdog. Say 'Y' here to - enable the OMAP1610/OMAP1710 watchdog timer. + Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog. Say 'Y' + here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog timer. config PNX4008_WATCHDOG tristate "PNX4008 Watchdog" -- cgit v1.2.3 From fb22d72782b023cda5e9876d3381f30932a64f91 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 22 Jan 2009 23:29:42 +0100 Subject: [NET] am79c961a: fix spin_lock usage MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit spin_lock functions take a pointer to the lock, not the lock itself. This error was noticed by compiling ebsa110_defconfig for linux-rt where the locking functions obviously are more picky about their arguments. Signed-off-by: Uwe Kleine-König Cc: Roel Kluin <12o3l@tiscali.nl> Cc: Steven Rostedt Cc: netdev@vger.kernel.org Signed-off-by: Russell King --- drivers/net/arm/am79c961a.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c index 0c628a9e5339..c2d012fcc29b 100644 --- a/drivers/net/arm/am79c961a.c +++ b/drivers/net/arm/am79c961a.c @@ -208,9 +208,9 @@ am79c961_init_for_open(struct net_device *dev) /* * Stop the chip. */ - spin_lock_irqsave(priv->chip_lock, flags); + spin_lock_irqsave(&priv->chip_lock, flags); write_rreg (dev->base_addr, CSR0, CSR0_BABL|CSR0_CERR|CSR0_MISS|CSR0_MERR|CSR0_TINT|CSR0_RINT|CSR0_STOP); - spin_unlock_irqrestore(priv->chip_lock, flags); + spin_unlock_irqrestore(&priv->chip_lock, flags); write_ireg (dev->base_addr, 5, 0x00a0); /* Receive address LED */ write_ireg (dev->base_addr, 6, 0x0081); /* Collision LED */ @@ -332,10 +332,10 @@ am79c961_close(struct net_device *dev) netif_stop_queue(dev); netif_carrier_off(dev); - spin_lock_irqsave(priv->chip_lock, flags); + spin_lock_irqsave(&priv->chip_lock, flags); write_rreg (dev->base_addr, CSR0, CSR0_STOP); write_rreg (dev->base_addr, CSR3, CSR3_MASKALL); - spin_unlock_irqrestore(priv->chip_lock, flags); + spin_unlock_irqrestore(&priv->chip_lock, flags); free_irq (dev->irq, dev); @@ -391,7 +391,7 @@ static void am79c961_setmulticastlist (struct net_device *dev) am79c961_mc_hash(dmi, multi_hash); } - spin_lock_irqsave(priv->chip_lock, flags); + spin_lock_irqsave(&priv->chip_lock, flags); stopped = read_rreg(dev->base_addr, CSR0) & CSR0_STOP; @@ -405,9 +405,9 @@ static void am79c961_setmulticastlist (struct net_device *dev) * Spin waiting for chip to report suspend mode */ while ((read_rreg(dev->base_addr, CTRL1) & CTRL1_SPND) == 0) { - spin_unlock_irqrestore(priv->chip_lock, flags); + spin_unlock_irqrestore(&priv->chip_lock, flags); nop(); - spin_lock_irqsave(priv->chip_lock, flags); + spin_lock_irqsave(&priv->chip_lock, flags); } } @@ -429,7 +429,7 @@ static void am79c961_setmulticastlist (struct net_device *dev) write_rreg(dev->base_addr, CTRL1, 0); } - spin_unlock_irqrestore(priv->chip_lock, flags); + spin_unlock_irqrestore(&priv->chip_lock, flags); } static void am79c961_timeout(struct net_device *dev) @@ -467,10 +467,10 @@ am79c961_sendpacket(struct sk_buff *skb, struct net_device *dev) am_writeword (dev, hdraddr + 2, TMD_OWN|TMD_STP|TMD_ENP); priv->txhead = head; - spin_lock_irqsave(priv->chip_lock, flags); + spin_lock_irqsave(&priv->chip_lock, flags); write_rreg (dev->base_addr, CSR0, CSR0_TDMD|CSR0_IENA); dev->trans_start = jiffies; - spin_unlock_irqrestore(priv->chip_lock, flags); + spin_unlock_irqrestore(&priv->chip_lock, flags); /* * If the next packet is owned by the ethernet device, -- cgit v1.2.3 From 74194cc71074c8bc17690a5d826093fb6f6e9928 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Sun, 18 Jan 2009 14:46:21 +0100 Subject: power_supply: pda_power: Don't request shared IRQs w/ IRQF_DISABLED IRQF_DISABLED is not guaranteed for shared IRQs. I think power_changed_isr doesn't need it anyway, as it only fires a timer. This patch enables IRQF_SAMPLE_RANDOM instead. Signed-off-by: Philipp Zabel Signed-off-by: Anton Vorontsov --- drivers/power/pda_power.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/power/pda_power.c b/drivers/power/pda_power.c index d30bb766fcef..b56a704409d2 100644 --- a/drivers/power/pda_power.c +++ b/drivers/power/pda_power.c @@ -20,7 +20,7 @@ static inline unsigned int get_irq_flags(struct resource *res) { - unsigned int flags = IRQF_DISABLED | IRQF_SHARED; + unsigned int flags = IRQF_SAMPLE_RANDOM | IRQF_SHARED; flags |= res->flags & IRQF_TRIGGER_MASK; -- cgit v1.2.3 From 801599b0cd4c026a18fb9fce436eae4459f799a6 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 20 Jan 2009 06:14:32 +0000 Subject: lcs: fix compilation for !CONFIG_IP_MULTICAST drivers/s390/net/lcs.c: In function 'lcs_new_device': drivers/s390/net/lcs.c:2179: error: implicit declaration of function 'lcs_set_multicast_list' Reported-by: Kamalesh Babulal Signed-off-by: Heiko Carstens Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- drivers/s390/net/lcs.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c index acca6678cb2b..49c3bfa1afd7 100644 --- a/drivers/s390/net/lcs.c +++ b/drivers/s390/net/lcs.c @@ -70,7 +70,9 @@ static char debug_buffer[255]; static void lcs_tasklet(unsigned long); static void lcs_start_kernel_thread(struct work_struct *); static void lcs_get_frames_cb(struct lcs_channel *, struct lcs_buffer *); +#ifdef CONFIG_IP_MULTICAST static int lcs_send_delipm(struct lcs_card *, struct lcs_ipm_list *); +#endif /* CONFIG_IP_MULTICAST */ static int lcs_recovery(void *ptr); /** @@ -1285,6 +1287,8 @@ out: lcs_clear_thread_running_bit(card, LCS_SET_MC_THREAD); return 0; } +#endif /* CONFIG_IP_MULTICAST */ + /** * function called by net device to * handle multicast address relevant things @@ -1292,6 +1296,7 @@ out: static void lcs_set_multicast_list(struct net_device *dev) { +#ifdef CONFIG_IP_MULTICAST struct lcs_card *card; LCS_DBF_TEXT(4, trace, "setmulti"); @@ -1299,9 +1304,8 @@ lcs_set_multicast_list(struct net_device *dev) if (!lcs_set_thread_start_bit(card, LCS_SET_MC_THREAD)) schedule_work(&card->kernel_thread_starter); -} - #endif /* CONFIG_IP_MULTICAST */ +} static long lcs_check_irb_error(struct ccw_device *cdev, struct irb *irb) -- cgit v1.2.3 From e918085aaff34086e265f825dd469926b1aec4a4 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Sun, 25 Jan 2009 18:06:26 -0800 Subject: virtio_net: Fix MAX_PACKET_LEN to support 802.1Q VLANs 802.1Q expanded the maximum ethernet frame size by 4 bytes for the VLAN tag. We're not taking this into account in virtio_net, which means the buffers we provide to the backend in the virtqueue RX ring aren't big enough to hold a full MTU VLAN packet. For QEMU/KVM, this results in the backend exiting with a packet truncation error. Signed-off-by: Alex Williamson Acked-by: Mark McLoughlin Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 43f6523c40be..63ef2a8905fb 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -24,6 +24,7 @@ #include #include #include +#include static int napi_weight = 128; module_param(napi_weight, int, 0444); @@ -33,7 +34,7 @@ module_param(csum, bool, 0444); module_param(gso, bool, 0444); /* FIXME: MTU in config. */ -#define MAX_PACKET_LEN (ETH_HLEN+ETH_DATA_LEN) +#define MAX_PACKET_LEN (ETH_HLEN + VLAN_HLEN + ETH_DATA_LEN) #define GOOD_COPY_LEN 128 struct virtnet_info -- cgit v1.2.3 From e88a0faae5baaaa3bdc6f23a55ad6bc7a7b4aa77 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Sat, 24 Jan 2009 08:22:47 +0000 Subject: xen: unitialised return value in xenbus_write_transaction The return value of xenbus_write_transaction can be uninitialised in the success case leading to the userspace xenstore utilities failing. Signed-off-by: Ian Campbell Signed-off-by: Ingo Molnar --- drivers/xen/xenfs/xenbus.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/xenfs/xenbus.c b/drivers/xen/xenfs/xenbus.c index 875a4c59c594..a9592d981b10 100644 --- a/drivers/xen/xenfs/xenbus.c +++ b/drivers/xen/xenfs/xenbus.c @@ -291,7 +291,7 @@ static void watch_fired(struct xenbus_watch *watch, static int xenbus_write_transaction(unsigned msg_type, struct xenbus_file_priv *u) { - int rc, ret; + int rc; void *reply; struct xenbus_transaction_holder *trans = NULL; LIST_HEAD(staging_q); @@ -326,15 +326,14 @@ static int xenbus_write_transaction(unsigned msg_type, } mutex_lock(&u->reply_mutex); - ret = queue_reply(&staging_q, &u->u.msg, sizeof(u->u.msg)); - if (!ret) - ret = queue_reply(&staging_q, reply, u->u.msg.len); - if (!ret) { + rc = queue_reply(&staging_q, &u->u.msg, sizeof(u->u.msg)); + if (!rc) + rc = queue_reply(&staging_q, reply, u->u.msg.len); + if (!rc) { list_splice_tail(&staging_q, &u->read_buffers); wake_up(&u->read_waitq); } else { queue_cleanup(&staging_q); - rc = ret; } mutex_unlock(&u->reply_mutex); -- cgit v1.2.3 From aeb565dfc3ac4c8b47c5049085b4c7bfb2c7d5d7 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 26 Jan 2009 10:01:53 -0800 Subject: Fix annoying DRM_ERROR() string warning Use '%zu' to print out a size_t variable, not '%d'. Another case of the "let's keep at least Linus' defconfig compile warningless" rule. Signed-off-by: Linus Torvalds --- drivers/gpu/drm/i915/i915_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 96316fd47233..33fbeb664f08 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3427,7 +3427,7 @@ i915_gem_attach_phys_object(struct drm_device *dev, ret = i915_gem_init_phys_object(dev, id, obj->size); if (ret) { - DRM_ERROR("failed to init phys object %d size: %d\n", id, obj->size); + DRM_ERROR("failed to init phys object %d size: %zu\n", id, obj->size); goto out; } } -- cgit v1.2.3 From 78272bbab895cc8f63bab5181dee55b72208e3b7 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Mon, 26 Jan 2009 12:16:26 -0800 Subject: e1000e: workaround hw errata There is a hardware errata in some revisions of the 82574 that needs to be worked around in the driver by setting a register bit at init. If this bit is not set A0 versions of the 82574 can generate tx hangs. Signed-off-by: Jesse Brandeburg Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/82571.c | 6 +++++- drivers/net/e1000e/hw.h | 1 + 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index cf43ee743b3c..0890162953e9 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -981,11 +981,15 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw) ew32(PBA_ECC, reg); } - /* PCI-Ex Control Register */ + /* PCI-Ex Control Registers */ if (hw->mac.type == e1000_82574) { reg = er32(GCR); reg |= (1 << 22); ew32(GCR, reg); + + reg = er32(GCR2); + reg |= 1; + ew32(GCR2, reg); } return; diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index f25e961c6b3b..2d4ce0492df0 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -206,6 +206,7 @@ enum e1e_registers { E1000_MANC2H = 0x05860, /* Management Control To Host - RW */ E1000_SW_FW_SYNC = 0x05B5C, /* Software-Firmware Synchronization - RW */ E1000_GCR = 0x05B00, /* PCI-Ex Control */ + E1000_GCR2 = 0x05B64, /* PCI-Ex Control #2 */ E1000_FACTPS = 0x05B30, /* Function Active and Power State to MNG */ E1000_SWSM = 0x05B50, /* SW Semaphore */ E1000_FWSM = 0x05B54, /* FW Semaphore */ -- cgit v1.2.3 From 1745522ccbabd990bfc7511861aa9fa98287cba0 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 26 Jan 2009 21:19:52 +0100 Subject: i2c: Delete many unused adapter IDs Signed-off-by: Jean Delvare --- drivers/gpu/drm/i915/intel_i2c.c | 4 --- drivers/i2c/busses/i2c-acorn.c | 1 - drivers/i2c/busses/i2c-ali1535.c | 1 - drivers/i2c/busses/i2c-ali1563.c | 1 - drivers/i2c/busses/i2c-ali15x3.c | 1 - drivers/i2c/busses/i2c-amd756.c | 1 - drivers/i2c/busses/i2c-amd8111.c | 1 - drivers/i2c/busses/i2c-au1550.c | 1 - drivers/i2c/busses/i2c-bfin-twi.c | 1 - drivers/i2c/busses/i2c-elektor.c | 1 - drivers/i2c/busses/i2c-hydra.c | 1 - drivers/i2c/busses/i2c-i801.c | 1 - drivers/i2c/busses/i2c-ibm_iic.c | 1 - drivers/i2c/busses/i2c-iop3xx.c | 1 - drivers/i2c/busses/i2c-ixp2000.c | 1 - drivers/i2c/busses/i2c-mpc.c | 1 - drivers/i2c/busses/i2c-mv64xxx.c | 1 - drivers/i2c/busses/i2c-nforce2.c | 1 - drivers/i2c/busses/i2c-parport-light.c | 1 - drivers/i2c/busses/i2c-parport.c | 1 - drivers/i2c/busses/i2c-pca-isa.c | 1 - drivers/i2c/busses/i2c-piix4.c | 1 - drivers/i2c/busses/i2c-sibyte.c | 2 -- drivers/i2c/busses/i2c-sis5595.c | 1 - drivers/i2c/busses/i2c-sis630.c | 1 - drivers/i2c/busses/i2c-sis96x.c | 1 - drivers/i2c/busses/i2c-via.c | 1 - drivers/i2c/busses/i2c-viapro.c | 1 - drivers/i2c/busses/i2c-voodoo3.c | 2 -- drivers/i2c/busses/scx200_acb.c | 1 - drivers/i2c/busses/scx200_i2c.c | 1 - drivers/ieee1394/pcilynx.c | 1 - drivers/video/aty/radeon_i2c.c | 1 - drivers/video/i810/i810-i2c.c | 1 - drivers/video/intelfb/intelfb_i2c.c | 1 - drivers/video/nvidia/nv_i2c.c | 1 - drivers/video/savage/savagefb-i2c.c | 1 - include/linux/i2c-id.h | 51 ---------------------------------- 38 files changed, 93 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index a5a2f5339e9e..5ee9d4c25753 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -137,10 +137,6 @@ struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg, chan->reg = reg; snprintf(chan->adapter.name, I2C_NAME_SIZE, "intel drm %s", name); chan->adapter.owner = THIS_MODULE; -#ifndef I2C_HW_B_INTELFB -#define I2C_HW_B_INTELFB I2C_HW_B_I810 -#endif - chan->adapter.id = I2C_HW_B_INTELFB; chan->adapter.algo_data = &chan->algo; chan->adapter.dev.parent = &dev->pdev->dev; chan->algo.setsda = set_data; diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c index 75089febbc13..9fee3ca17344 100644 --- a/drivers/i2c/busses/i2c-acorn.c +++ b/drivers/i2c/busses/i2c-acorn.c @@ -83,7 +83,6 @@ static struct i2c_algo_bit_data ioc_data = { }; static struct i2c_adapter ioc_ops = { - .id = I2C_HW_B_IOC, .algo_data = &ioc_data, }; diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index 9cead9b9458e..981e080b32ae 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -476,7 +476,6 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter ali1535_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_SMBUS_ALI1535, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index dd9e796fad69..f70f46582c6c 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -386,7 +386,6 @@ static const struct i2c_algorithm ali1563_algorithm = { static struct i2c_adapter ali1563_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_SMBUS_ALI1563, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &ali1563_algorithm, }; diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index 234fdde7d40e..39066dee46e3 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -473,7 +473,6 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter ali15x3_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_SMBUS_ALI15X3, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index 36bee5b9c952..220f4a1eee1d 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -298,7 +298,6 @@ static const struct i2c_algorithm smbus_algorithm = { struct i2c_adapter amd756_smbus = { .owner = THIS_MODULE, - .id = I2C_HW_SMBUS_AMD756, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index 3972208876b3..edab51973bf5 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -387,7 +387,6 @@ static int __devinit amd8111_probe(struct pci_dev *dev, smbus->adapter.owner = THIS_MODULE; snprintf(smbus->adapter.name, sizeof(smbus->adapter.name), "SMBus2 AMD8111 adapter at %04x", smbus->base); - smbus->adapter.id = I2C_HW_SMBUS_AMD8111; smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD; smbus->adapter.algo = &smbus_algorithm; smbus->adapter.algo_data = smbus; diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c index 66a04c2c660f..f78ce523e3db 100644 --- a/drivers/i2c/busses/i2c-au1550.c +++ b/drivers/i2c/busses/i2c-au1550.c @@ -400,7 +400,6 @@ i2c_au1550_probe(struct platform_device *pdev) priv->xfer_timeout = 200; priv->ack_timeout = 200; - priv->adap.id = I2C_HW_AU1550_PSC; priv->adap.nr = pdev->id; priv->adap.algo = &au1550_algo; priv->adap.algo_data = priv; diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c index 3fd2c417c1e0..fc548b3d002e 100644 --- a/drivers/i2c/busses/i2c-bfin-twi.c +++ b/drivers/i2c/busses/i2c-bfin-twi.c @@ -651,7 +651,6 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev) iface->timeout_timer.data = (unsigned long)iface; p_adap = &iface->adap; - p_adap->id = I2C_HW_BLACKFIN; p_adap->nr = pdev->id; strlcpy(p_adap->name, pdev->name, sizeof(p_adap->name)); p_adap->algo = &bfin_twi_algorithm; diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c index 0ed3ccb81b63..448b4bf35eb7 100644 --- a/drivers/i2c/busses/i2c-elektor.c +++ b/drivers/i2c/busses/i2c-elektor.c @@ -202,7 +202,6 @@ static struct i2c_algo_pcf_data pcf_isa_data = { static struct i2c_adapter pcf_isa_ops = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, - .id = I2C_HW_P_ELEK, .algo_data = &pcf_isa_data, .name = "i2c-elektor", }; diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c index 648aa7baff83..bec9b845dd16 100644 --- a/drivers/i2c/busses/i2c-hydra.c +++ b/drivers/i2c/busses/i2c-hydra.c @@ -102,7 +102,6 @@ static struct i2c_algo_bit_data hydra_bit_data = { static struct i2c_adapter hydra_adap = { .owner = THIS_MODULE, .name = "Hydra i2c", - .id = I2C_HW_B_HYDRA, .algo_data = &hydra_bit_data, }; diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 526625eaa84b..230238df56c4 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -556,7 +556,6 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter i801_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_SMBUS_I801, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index 651f2f1ae5b7..88f0db73b364 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -746,7 +746,6 @@ static int __devinit iic_probe(struct of_device *ofdev, adap->dev.parent = &ofdev->dev; strlcpy(adap->name, "IBM IIC", sizeof(adap->name)); i2c_set_adapdata(adap, dev); - adap->id = I2C_HW_OCP; adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; adap->algo = &iic_algo; adap->timeout = 1; diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c index fc2714ac0c0f..3190690c26ce 100644 --- a/drivers/i2c/busses/i2c-iop3xx.c +++ b/drivers/i2c/busses/i2c-iop3xx.c @@ -480,7 +480,6 @@ iop3xx_i2c_probe(struct platform_device *pdev) } memcpy(new_adapter->name, pdev->name, strlen(pdev->name)); - new_adapter->id = I2C_HW_IOP3XX; new_adapter->owner = THIS_MODULE; new_adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; new_adapter->dev.parent = &pdev->dev; diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c index 05d72e981353..8e8467970481 100644 --- a/drivers/i2c/busses/i2c-ixp2000.c +++ b/drivers/i2c/busses/i2c-ixp2000.c @@ -116,7 +116,6 @@ static int ixp2000_i2c_probe(struct platform_device *plat_dev) drv_data->algo_data.udelay = 6; drv_data->algo_data.timeout = 100; - drv_data->adapter.id = I2C_HW_B_IXP2000, strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name, sizeof(drv_data->adapter.name)); drv_data->adapter.algo_data = &drv_data->algo_data, diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index a9a45fcc8544..aedbbe6618db 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -310,7 +310,6 @@ static const struct i2c_algorithm mpc_algo = { static struct i2c_adapter mpc_ops = { .owner = THIS_MODULE, .name = "MPC adapter", - .id = I2C_HW_MPC107, .algo = &mpc_algo, .timeout = 1, }; diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index 9e8118d2fe64..eeda276f8f16 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -527,7 +527,6 @@ mv64xxx_i2c_probe(struct platform_device *pd) goto exit_unmap_regs; } drv_data->adapter.dev.parent = &pd->dev; - drv_data->adapter.id = I2C_HW_MV64XXX; drv_data->adapter.algo = &mv64xxx_i2c_algo; drv_data->adapter.owner = THIS_MODULE; drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD; diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index 3b19bc41a60b..05af6cd7f270 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -355,7 +355,6 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar, return -EBUSY; } smbus->adapter.owner = THIS_MODULE; - smbus->adapter.id = I2C_HW_SMBUS_NFORCE2; smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD; smbus->adapter.algo = &smbus_algorithm; smbus->adapter.algo_data = smbus; diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c index b2b8380f6602..322c5691e38e 100644 --- a/drivers/i2c/busses/i2c-parport-light.c +++ b/drivers/i2c/busses/i2c-parport-light.c @@ -115,7 +115,6 @@ static struct i2c_algo_bit_data parport_algo_data = { static struct i2c_adapter parport_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, - .id = I2C_HW_B_LP, .algo_data = &parport_algo_data, .name = "Parallel port adapter (light)", }; diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c index a257cd5cd134..0d8998610c74 100644 --- a/drivers/i2c/busses/i2c-parport.c +++ b/drivers/i2c/busses/i2c-parport.c @@ -164,7 +164,6 @@ static void i2c_parport_attach (struct parport *port) /* Fill the rest of the structure */ adapter->adapter.owner = THIS_MODULE; adapter->adapter.class = I2C_CLASS_HWMON; - adapter->adapter.id = I2C_HW_B_LP; strlcpy(adapter->adapter.name, "Parallel port adapter", sizeof(adapter->adapter.name)); adapter->algo_data = parport_algo_data; diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c index 9eb76268ec78..4aa8138cb0a9 100644 --- a/drivers/i2c/busses/i2c-pca-isa.c +++ b/drivers/i2c/busses/i2c-pca-isa.c @@ -101,7 +101,6 @@ static struct i2c_algo_pca_data pca_isa_data = { static struct i2c_adapter pca_isa_ops = { .owner = THIS_MODULE, - .id = I2C_HW_A_ISA, .algo_data = &pca_isa_data, .name = "PCA9564 ISA Adapter", .timeout = 100, diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index eaa9b387543e..761f9dd53620 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -403,7 +403,6 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter piix4_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_SMBUS_PIIX4, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c index 4ddefbf238e9..98b1ec489159 100644 --- a/drivers/i2c/busses/i2c-sibyte.c +++ b/drivers/i2c/busses/i2c-sibyte.c @@ -155,7 +155,6 @@ static struct i2c_algo_sibyte_data sibyte_board_data[2] = { static struct i2c_adapter sibyte_board_adapter[2] = { { .owner = THIS_MODULE, - .id = I2C_HW_SIBYTE, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = NULL, .algo_data = &sibyte_board_data[0], @@ -164,7 +163,6 @@ static struct i2c_adapter sibyte_board_adapter[2] = { }, { .owner = THIS_MODULE, - .id = I2C_HW_SIBYTE, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = NULL, .algo_data = &sibyte_board_data[1], diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index 8ce2daff985c..f320ab27da46 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -365,7 +365,6 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sis5595_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_SMBUS_SIS5595, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index 9c9c016ff2b5..50c3610e6028 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -464,7 +464,6 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sis630_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_SMBUS_SIS630, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index f1bba6396641..7e1594b40579 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -241,7 +241,6 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sis96x_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_SMBUS_SIS96X, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c index 29cef0433f34..8b24f192103a 100644 --- a/drivers/i2c/busses/i2c-via.c +++ b/drivers/i2c/busses/i2c-via.c @@ -83,7 +83,6 @@ static struct i2c_algo_bit_data bit_data = { static struct i2c_adapter vt586b_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_B_VIA, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .name = "VIA i2c", .algo_data = &bit_data, diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 9f194d9efd91..02e6f724b05f 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -321,7 +321,6 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter vt596_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_SMBUS_VIA2, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c index 1d4ae26ba73d..1a474acc0ddd 100644 --- a/drivers/i2c/busses/i2c-voodoo3.c +++ b/drivers/i2c/busses/i2c-voodoo3.c @@ -163,7 +163,6 @@ static struct i2c_algo_bit_data voo_i2c_bit_data = { static struct i2c_adapter voodoo3_i2c_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_B_VOO, .class = I2C_CLASS_TV_ANALOG, .name = "I2C Voodoo3/Banshee adapter", .algo_data = &voo_i2c_bit_data, @@ -180,7 +179,6 @@ static struct i2c_algo_bit_data voo_ddc_bit_data = { static struct i2c_adapter voodoo3_ddc_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_B_VOO, .class = I2C_CLASS_DDC, .name = "DDC Voodoo3/Banshee adapter", .algo_data = &voo_ddc_bit_data, diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c index ed794b145a11..648ecc6f60e6 100644 --- a/drivers/i2c/busses/scx200_acb.c +++ b/drivers/i2c/busses/scx200_acb.c @@ -440,7 +440,6 @@ static __init struct scx200_acb_iface *scx200_create_iface(const char *text, i2c_set_adapdata(adapter, iface); snprintf(adapter->name, sizeof(adapter->name), "%s ACB%d", text, index); adapter->owner = THIS_MODULE; - adapter->id = I2C_HW_SMBUS_SCX200; adapter->algo = &scx200_acb_algorithm; adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; adapter->dev.parent = dev; diff --git a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c index e4c98539c517..162b74a04886 100644 --- a/drivers/i2c/busses/scx200_i2c.c +++ b/drivers/i2c/busses/scx200_i2c.c @@ -82,7 +82,6 @@ static struct i2c_algo_bit_data scx200_i2c_data = { static struct i2c_adapter scx200_i2c_ops = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, - .id = I2C_HW_B_SCX200, .algo_data = &scx200_i2c_data, .name = "NatSemi SCx200 I2C", }; diff --git a/drivers/ieee1394/pcilynx.c b/drivers/ieee1394/pcilynx.c index dc15cadb06ef..38f712036201 100644 --- a/drivers/ieee1394/pcilynx.c +++ b/drivers/ieee1394/pcilynx.c @@ -1419,7 +1419,6 @@ static int __devinit add_card(struct pci_dev *dev, i2c_ad = kzalloc(sizeof(*i2c_ad), GFP_KERNEL); if (!i2c_ad) FAIL("failed to allocate I2C adapter memory"); - i2c_ad->id = I2C_HW_B_PCILYNX; strlcpy(i2c_ad->name, "PCILynx I2C", sizeof(i2c_ad->name)); i2c_adapter_data = bit_data; i2c_ad->algo_data = &i2c_adapter_data; diff --git a/drivers/video/aty/radeon_i2c.c b/drivers/video/aty/radeon_i2c.c index 2c5567175dca..359fc64e761a 100644 --- a/drivers/video/aty/radeon_i2c.c +++ b/drivers/video/aty/radeon_i2c.c @@ -72,7 +72,6 @@ static int radeon_setup_i2c_bus(struct radeon_i2c_chan *chan, const char *name) snprintf(chan->adapter.name, sizeof(chan->adapter.name), "radeonfb %s", name); chan->adapter.owner = THIS_MODULE; - chan->adapter.id = I2C_HW_B_RADEON; chan->adapter.algo_data = &chan->algo; chan->adapter.dev.parent = &chan->rinfo->pdev->dev; chan->algo.setsda = radeon_gpio_setsda; diff --git a/drivers/video/i810/i810-i2c.c b/drivers/video/i810/i810-i2c.c index 7787c3322ffb..9dd55e5324a1 100644 --- a/drivers/video/i810/i810-i2c.c +++ b/drivers/video/i810/i810-i2c.c @@ -90,7 +90,6 @@ static int i810_setup_i2c_bus(struct i810fb_i2c_chan *chan, const char *name) chan->adapter.owner = THIS_MODULE; chan->adapter.algo_data = &chan->algo; chan->adapter.dev.parent = &chan->par->dev->dev; - chan->adapter.id = I2C_HW_B_I810; chan->algo.setsda = i810i2c_setsda; chan->algo.setscl = i810i2c_setscl; chan->algo.getsda = i810i2c_getsda; diff --git a/drivers/video/intelfb/intelfb_i2c.c b/drivers/video/intelfb/intelfb_i2c.c index 5d896b81f4e0..b3065492bb20 100644 --- a/drivers/video/intelfb/intelfb_i2c.c +++ b/drivers/video/intelfb/intelfb_i2c.c @@ -111,7 +111,6 @@ static int intelfb_setup_i2c_bus(struct intelfb_info *dinfo, "intelfb %s", name); chan->adapter.class = class; chan->adapter.owner = THIS_MODULE; - chan->adapter.id = I2C_HW_B_INTELFB; chan->adapter.algo_data = &chan->algo; chan->adapter.dev.parent = &chan->dinfo->pdev->dev; chan->algo.setsda = intelfb_gpio_setsda; diff --git a/drivers/video/nvidia/nv_i2c.c b/drivers/video/nvidia/nv_i2c.c index 6fd7cb8f9b8e..6aaddb4f6788 100644 --- a/drivers/video/nvidia/nv_i2c.c +++ b/drivers/video/nvidia/nv_i2c.c @@ -87,7 +87,6 @@ static int nvidia_setup_i2c_bus(struct nvidia_i2c_chan *chan, const char *name, strcpy(chan->adapter.name, name); chan->adapter.owner = THIS_MODULE; - chan->adapter.id = I2C_HW_B_NVIDIA; chan->adapter.class = i2c_class; chan->adapter.algo_data = &chan->algo; chan->adapter.dev.parent = &chan->par->pci_dev->dev; diff --git a/drivers/video/savage/savagefb-i2c.c b/drivers/video/savage/savagefb-i2c.c index 783d4adffb93..574b29e9f8f2 100644 --- a/drivers/video/savage/savagefb-i2c.c +++ b/drivers/video/savage/savagefb-i2c.c @@ -137,7 +137,6 @@ static int savage_setup_i2c_bus(struct savagefb_i2c_chan *chan, if (chan->par) { strcpy(chan->adapter.name, name); chan->adapter.owner = THIS_MODULE; - chan->adapter.id = I2C_HW_B_SAVAGE; chan->adapter.algo_data = &chan->algo; chan->adapter.dev.parent = &chan->par->pcidev->dev; chan->algo.udelay = 10; diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index 82b7eee22636..1ffc23bc5d1e 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -79,74 +79,23 @@ */ /* --- Bit algorithm adapters */ -#define I2C_HW_B_LP 0x010000 /* Parallel port Philips style */ #define I2C_HW_B_BT848 0x010005 /* BT848 video boards */ -#define I2C_HW_B_VIA 0x010007 /* Via vt82c586b */ -#define I2C_HW_B_HYDRA 0x010008 /* Apple Hydra Mac I/O */ -#define I2C_HW_B_I810 0x01000a /* Intel I810 */ -#define I2C_HW_B_VOO 0x01000b /* 3dfx Voodoo 3 / Banshee */ -#define I2C_HW_B_SCX200 0x01000e /* Nat'l Semi SCx200 I2C */ #define I2C_HW_B_RIVA 0x010010 /* Riva based graphics cards */ -#define I2C_HW_B_IOC 0x010011 /* IOC bit-wiggling */ -#define I2C_HW_B_IXP2000 0x010016 /* GPIO on IXP2000 systems */ #define I2C_HW_B_ZR36067 0x010019 /* Zoran-36057/36067 based boards */ -#define I2C_HW_B_PCILYNX 0x01001a /* TI PCILynx I2C adapter */ #define I2C_HW_B_CX2388x 0x01001b /* connexant 2388x based tv cards */ -#define I2C_HW_B_NVIDIA 0x01001c /* nvidia framebuffer driver */ -#define I2C_HW_B_SAVAGE 0x01001d /* savage framebuffer driver */ -#define I2C_HW_B_RADEON 0x01001e /* radeon framebuffer driver */ #define I2C_HW_B_EM28XX 0x01001f /* em28xx video capture cards */ #define I2C_HW_B_CX2341X 0x010020 /* Conexant CX2341X MPEG encoder cards */ -#define I2C_HW_B_INTELFB 0x010021 /* intel framebuffer driver */ #define I2C_HW_B_CX23885 0x010022 /* conexant 23885 based tv cards (bus1) */ #define I2C_HW_B_AU0828 0x010023 /* auvitek au0828 usb bridge */ -/* --- PCF 8584 based algorithms */ -#define I2C_HW_P_ELEK 0x020002 /* Elektor ISA Bus inteface card */ - -/* --- PCA 9564 based algorithms */ -#define I2C_HW_A_ISA 0x1a0000 /* generic ISA Bus interface card */ - -/* --- PowerPC on-chip adapters */ -#define I2C_HW_OCP 0x120000 /* IBM on-chip I2C adapter */ - -/* --- Broadcom SiByte adapters */ -#define I2C_HW_SIBYTE 0x150000 - /* --- SGI adapters */ #define I2C_HW_SGI_VINO 0x160000 -/* --- XSCALE on-chip adapters */ -#define I2C_HW_IOP3XX 0x140000 - -/* --- Au1550 PSC adapters adapters */ -#define I2C_HW_AU1550_PSC 0x1b0000 - /* --- SMBus only adapters */ -#define I2C_HW_SMBUS_PIIX4 0x040000 -#define I2C_HW_SMBUS_ALI15X3 0x040001 -#define I2C_HW_SMBUS_VIA2 0x040002 -#define I2C_HW_SMBUS_I801 0x040004 -#define I2C_HW_SMBUS_AMD756 0x040005 -#define I2C_HW_SMBUS_SIS5595 0x040006 -#define I2C_HW_SMBUS_ALI1535 0x040007 -#define I2C_HW_SMBUS_SIS630 0x040008 -#define I2C_HW_SMBUS_SIS96X 0x040009 -#define I2C_HW_SMBUS_AMD8111 0x04000a -#define I2C_HW_SMBUS_SCX200 0x04000b -#define I2C_HW_SMBUS_NFORCE2 0x04000c #define I2C_HW_SMBUS_W9968CF 0x04000d #define I2C_HW_SMBUS_OV511 0x04000e /* OV511(+) USB 1.1 webcam ICs */ #define I2C_HW_SMBUS_OV518 0x04000f /* OV518(+) USB 1.1 webcam ICs */ #define I2C_HW_SMBUS_CAFE 0x040012 /* Marvell 88ALP01 "CAFE" cam */ -#define I2C_HW_SMBUS_ALI1563 0x040013 - -/* --- MCP107 adapter */ -#define I2C_HW_MPC107 0x0d0000 - -/* --- Embedded adapters */ -#define I2C_HW_MV64XXX 0x190000 -#define I2C_HW_BLACKFIN 0x190001 /* ADI Blackfin I2C TWI driver */ /* --- Miscellaneous adapters */ #define I2C_HW_SAA7146 0x060000 /* SAA7146 video decoder bus */ -- cgit v1.2.3 From 5195e5093bb7d30dbf057b260005cb4ab9761168 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 26 Jan 2009 21:19:53 +0100 Subject: i2c: Move at24 to drivers/misc/eeprom As drivers/i2c/chips is going to go away, move the driver to drivers/misc/eeprom. Other eeprom drivers may be moved here later, too. Update Kconfig text to specify this driver as I2C. Signed-off-by: Wolfram Sang Signed-off-by: Jean Delvare --- drivers/i2c/chips/Kconfig | 26 -- drivers/i2c/chips/Makefile | 1 - drivers/i2c/chips/at24.c | 582 ------------------------------------------- drivers/misc/Kconfig | 1 + drivers/misc/Makefile | 1 + drivers/misc/eeprom/Kconfig | 29 +++ drivers/misc/eeprom/Makefile | 1 + drivers/misc/eeprom/at24.c | 582 +++++++++++++++++++++++++++++++++++++++++++ 8 files changed, 614 insertions(+), 609 deletions(-) delete mode 100644 drivers/i2c/chips/at24.c create mode 100644 drivers/misc/eeprom/Kconfig create mode 100644 drivers/misc/eeprom/Makefile create mode 100644 drivers/misc/eeprom/at24.c (limited to 'drivers') diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index b9bef04b7be4..b58e77056b2e 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -16,32 +16,6 @@ config DS1682 This driver can also be built as a module. If so, the module will be called ds1682. -config AT24 - tristate "EEPROMs from most vendors" - depends on SYSFS && EXPERIMENTAL - help - Enable this driver to get read/write support to most I2C EEPROMs, - after you configure the driver to know about each EEPROM on - your target board. Use these generic chip names, instead of - vendor-specific ones like at24c64 or 24lc02: - - 24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08, - 24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024 - - Unless you like data loss puzzles, always be sure that any chip - you configure as a 24c32 (32 kbit) or larger is NOT really a - 24c16 (16 kbit) or smaller, and vice versa. Marking the chip - as read-only won't help recover from this. Also, if your chip - has any software write-protect mechanism you may want to review the - code to make sure this driver won't turn it on by accident. - - If you use this with an SMBus adapter instead of an I2C adapter, - full functionality is not available. Only smaller devices are - supported (24c16 and below, max 4 kByte). - - This driver can also be built as a module. If so, the module - will be called at24. - config SENSORS_EEPROM tristate "EEPROM reader" depends on EXPERIMENTAL diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index 00fcb5193ac2..5c14776eb76a 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -11,7 +11,6 @@ # obj-$(CONFIG_DS1682) += ds1682.o -obj-$(CONFIG_AT24) += at24.o obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o obj-$(CONFIG_SENSORS_MAX6875) += max6875.o obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o diff --git a/drivers/i2c/chips/at24.c b/drivers/i2c/chips/at24.c deleted file mode 100644 index d4775528abc6..000000000000 --- a/drivers/i2c/chips/at24.c +++ /dev/null @@ -1,582 +0,0 @@ -/* - * at24.c - handle most I2C EEPROMs - * - * Copyright (C) 2005-2007 David Brownell - * Copyright (C) 2008 Wolfram Sang, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * I2C EEPROMs from most vendors are inexpensive and mostly interchangeable. - * Differences between different vendor product lines (like Atmel AT24C or - * MicroChip 24LC, etc) won't much matter for typical read/write access. - * There are also I2C RAM chips, likewise interchangeable. One example - * would be the PCF8570, which acts like a 24c02 EEPROM (256 bytes). - * - * However, misconfiguration can lose data. "Set 16-bit memory address" - * to a part with 8-bit addressing will overwrite data. Writing with too - * big a page size also loses data. And it's not safe to assume that the - * conventional addresses 0x50..0x57 only hold eeproms; a PCF8563 RTC - * uses 0x51, for just one example. - * - * Accordingly, explicit board-specific configuration data should be used - * in almost all cases. (One partial exception is an SMBus used to access - * "SPD" data for DRAM sticks. Those only use 24c02 EEPROMs.) - * - * So this driver uses "new style" I2C driver binding, expecting to be - * told what devices exist. That may be in arch/X/mach-Y/board-Z.c or - * similar kernel-resident tables; or, configuration data coming from - * a bootloader. - * - * Other than binding model, current differences from "eeprom" driver are - * that this one handles write access and isn't restricted to 24c02 devices. - * It also handles larger devices (32 kbit and up) with two-byte addresses, - * which won't work on pure SMBus systems. - */ - -struct at24_data { - struct at24_platform_data chip; - bool use_smbus; - - /* - * Lock protects against activities from other Linux tasks, - * but not from changes by other I2C masters. - */ - struct mutex lock; - struct bin_attribute bin; - - u8 *writebuf; - unsigned write_max; - unsigned num_addresses; - - /* - * Some chips tie up multiple I2C addresses; dummy devices reserve - * them for us, and we'll use them with SMBus calls. - */ - struct i2c_client *client[]; -}; - -/* - * This parameter is to help this driver avoid blocking other drivers out - * of I2C for potentially troublesome amounts of time. With a 100 kHz I2C - * clock, one 256 byte read takes about 1/43 second which is excessive; - * but the 1/170 second it takes at 400 kHz may be quite reasonable; and - * at 1 MHz (Fm+) a 1/430 second delay could easily be invisible. - * - * This value is forced to be a power of two so that writes align on pages. - */ -static unsigned io_limit = 128; -module_param(io_limit, uint, 0); -MODULE_PARM_DESC(io_limit, "Maximum bytes per I/O (default 128)"); - -/* - * Specs often allow 5 msec for a page write, sometimes 20 msec; - * it's important to recover from write timeouts. - */ -static unsigned write_timeout = 25; -module_param(write_timeout, uint, 0); -MODULE_PARM_DESC(write_timeout, "Time (in ms) to try writes (default 25)"); - -#define AT24_SIZE_BYTELEN 5 -#define AT24_SIZE_FLAGS 8 - -#define AT24_BITMASK(x) (BIT(x) - 1) - -/* create non-zero magic value for given eeprom parameters */ -#define AT24_DEVICE_MAGIC(_len, _flags) \ - ((1 << AT24_SIZE_FLAGS | (_flags)) \ - << AT24_SIZE_BYTELEN | ilog2(_len)) - -static const struct i2c_device_id at24_ids[] = { - /* needs 8 addresses as A0-A2 are ignored */ - { "24c00", AT24_DEVICE_MAGIC(128 / 8, AT24_FLAG_TAKE8ADDR) }, - /* old variants can't be handled with this generic entry! */ - { "24c01", AT24_DEVICE_MAGIC(1024 / 8, 0) }, - { "24c02", AT24_DEVICE_MAGIC(2048 / 8, 0) }, - /* spd is a 24c02 in memory DIMMs */ - { "spd", AT24_DEVICE_MAGIC(2048 / 8, - AT24_FLAG_READONLY | AT24_FLAG_IRUGO) }, - { "24c04", AT24_DEVICE_MAGIC(4096 / 8, 0) }, - /* 24rf08 quirk is handled at i2c-core */ - { "24c08", AT24_DEVICE_MAGIC(8192 / 8, 0) }, - { "24c16", AT24_DEVICE_MAGIC(16384 / 8, 0) }, - { "24c32", AT24_DEVICE_MAGIC(32768 / 8, AT24_FLAG_ADDR16) }, - { "24c64", AT24_DEVICE_MAGIC(65536 / 8, AT24_FLAG_ADDR16) }, - { "24c128", AT24_DEVICE_MAGIC(131072 / 8, AT24_FLAG_ADDR16) }, - { "24c256", AT24_DEVICE_MAGIC(262144 / 8, AT24_FLAG_ADDR16) }, - { "24c512", AT24_DEVICE_MAGIC(524288 / 8, AT24_FLAG_ADDR16) }, - { "24c1024", AT24_DEVICE_MAGIC(1048576 / 8, AT24_FLAG_ADDR16) }, - { "at24", 0 }, - { /* END OF LIST */ } -}; -MODULE_DEVICE_TABLE(i2c, at24_ids); - -/*-------------------------------------------------------------------------*/ - -/* - * This routine supports chips which consume multiple I2C addresses. It - * computes the addressing information to be used for a given r/w request. - * Assumes that sanity checks for offset happened at sysfs-layer. - */ -static struct i2c_client *at24_translate_offset(struct at24_data *at24, - unsigned *offset) -{ - unsigned i; - - if (at24->chip.flags & AT24_FLAG_ADDR16) { - i = *offset >> 16; - *offset &= 0xffff; - } else { - i = *offset >> 8; - *offset &= 0xff; - } - - return at24->client[i]; -} - -static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf, - unsigned offset, size_t count) -{ - struct i2c_msg msg[2]; - u8 msgbuf[2]; - struct i2c_client *client; - int status, i; - - memset(msg, 0, sizeof(msg)); - - /* - * REVISIT some multi-address chips don't rollover page reads to - * the next slave address, so we may need to truncate the count. - * Those chips might need another quirk flag. - * - * If the real hardware used four adjacent 24c02 chips and that - * were misconfigured as one 24c08, that would be a similar effect: - * one "eeprom" file not four, but larger reads would fail when - * they crossed certain pages. - */ - - /* - * Slave address and byte offset derive from the offset. Always - * set the byte address; on a multi-master board, another master - * may have changed the chip's "current" address pointer. - */ - client = at24_translate_offset(at24, &offset); - - if (count > io_limit) - count = io_limit; - - /* Smaller eeproms can work given some SMBus extension calls */ - if (at24->use_smbus) { - if (count > I2C_SMBUS_BLOCK_MAX) - count = I2C_SMBUS_BLOCK_MAX; - status = i2c_smbus_read_i2c_block_data(client, offset, - count, buf); - dev_dbg(&client->dev, "smbus read %zu@%d --> %d\n", - count, offset, status); - return (status < 0) ? -EIO : status; - } - - /* - * When we have a better choice than SMBus calls, use a combined - * I2C message. Write address; then read up to io_limit data bytes. - * Note that read page rollover helps us here (unlike writes). - * msgbuf is u8 and will cast to our needs. - */ - i = 0; - if (at24->chip.flags & AT24_FLAG_ADDR16) - msgbuf[i++] = offset >> 8; - msgbuf[i++] = offset; - - msg[0].addr = client->addr; - msg[0].buf = msgbuf; - msg[0].len = i; - - msg[1].addr = client->addr; - msg[1].flags = I2C_M_RD; - msg[1].buf = buf; - msg[1].len = count; - - status = i2c_transfer(client->adapter, msg, 2); - dev_dbg(&client->dev, "i2c read %zu@%d --> %d\n", - count, offset, status); - - if (status == 2) - return count; - else if (status >= 0) - return -EIO; - else - return status; -} - -static ssize_t at24_bin_read(struct kobject *kobj, struct bin_attribute *attr, - char *buf, loff_t off, size_t count) -{ - struct at24_data *at24; - ssize_t retval = 0; - - at24 = dev_get_drvdata(container_of(kobj, struct device, kobj)); - - if (unlikely(!count)) - return count; - - /* - * Read data from chip, protecting against concurrent updates - * from this host, but not from other I2C masters. - */ - mutex_lock(&at24->lock); - - while (count) { - ssize_t status; - - status = at24_eeprom_read(at24, buf, off, count); - if (status <= 0) { - if (retval == 0) - retval = status; - break; - } - buf += status; - off += status; - count -= status; - retval += status; - } - - mutex_unlock(&at24->lock); - - return retval; -} - - -/* - * REVISIT: export at24_bin{read,write}() to let other kernel code use - * eeprom data. For example, it might hold a board's Ethernet address, or - * board-specific calibration data generated on the manufacturing floor. - */ - - -/* - * Note that if the hardware write-protect pin is pulled high, the whole - * chip is normally write protected. But there are plenty of product - * variants here, including OTP fuses and partial chip protect. - * - * We only use page mode writes; the alternative is sloooow. This routine - * writes at most one page. - */ -static ssize_t at24_eeprom_write(struct at24_data *at24, char *buf, - unsigned offset, size_t count) -{ - struct i2c_client *client; - struct i2c_msg msg; - ssize_t status; - unsigned long timeout, write_time; - unsigned next_page; - - /* Get corresponding I2C address and adjust offset */ - client = at24_translate_offset(at24, &offset); - - /* write_max is at most a page */ - if (count > at24->write_max) - count = at24->write_max; - - /* Never roll over backwards, to the start of this page */ - next_page = roundup(offset + 1, at24->chip.page_size); - if (offset + count > next_page) - count = next_page - offset; - - /* If we'll use I2C calls for I/O, set up the message */ - if (!at24->use_smbus) { - int i = 0; - - msg.addr = client->addr; - msg.flags = 0; - - /* msg.buf is u8 and casts will mask the values */ - msg.buf = at24->writebuf; - if (at24->chip.flags & AT24_FLAG_ADDR16) - msg.buf[i++] = offset >> 8; - - msg.buf[i++] = offset; - memcpy(&msg.buf[i], buf, count); - msg.len = i + count; - } - - /* - * Writes fail if the previous one didn't complete yet. We may - * loop a few times until this one succeeds, waiting at least - * long enough for one entire page write to work. - */ - timeout = jiffies + msecs_to_jiffies(write_timeout); - do { - write_time = jiffies; - if (at24->use_smbus) { - status = i2c_smbus_write_i2c_block_data(client, - offset, count, buf); - if (status == 0) - status = count; - } else { - status = i2c_transfer(client->adapter, &msg, 1); - if (status == 1) - status = count; - } - dev_dbg(&client->dev, "write %zu@%d --> %zd (%ld)\n", - count, offset, status, jiffies); - - if (status == count) - return count; - - /* REVISIT: at HZ=100, this is sloooow */ - msleep(1); - } while (time_before(write_time, timeout)); - - return -ETIMEDOUT; -} - -static ssize_t at24_bin_write(struct kobject *kobj, struct bin_attribute *attr, - char *buf, loff_t off, size_t count) -{ - struct at24_data *at24; - ssize_t retval = 0; - - at24 = dev_get_drvdata(container_of(kobj, struct device, kobj)); - - if (unlikely(!count)) - return count; - - /* - * Write data to chip, protecting against concurrent updates - * from this host, but not from other I2C masters. - */ - mutex_lock(&at24->lock); - - while (count) { - ssize_t status; - - status = at24_eeprom_write(at24, buf, off, count); - if (status <= 0) { - if (retval == 0) - retval = status; - break; - } - buf += status; - off += status; - count -= status; - retval += status; - } - - mutex_unlock(&at24->lock); - - return retval; -} - -/*-------------------------------------------------------------------------*/ - -static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) -{ - struct at24_platform_data chip; - bool writable; - bool use_smbus = false; - struct at24_data *at24; - int err; - unsigned i, num_addresses; - kernel_ulong_t magic; - - if (client->dev.platform_data) { - chip = *(struct at24_platform_data *)client->dev.platform_data; - } else { - if (!id->driver_data) { - err = -ENODEV; - goto err_out; - } - magic = id->driver_data; - chip.byte_len = BIT(magic & AT24_BITMASK(AT24_SIZE_BYTELEN)); - magic >>= AT24_SIZE_BYTELEN; - chip.flags = magic & AT24_BITMASK(AT24_SIZE_FLAGS); - /* - * This is slow, but we can't know all eeproms, so we better - * play safe. Specifying custom eeprom-types via platform_data - * is recommended anyhow. - */ - chip.page_size = 1; - } - - if (!is_power_of_2(chip.byte_len)) - dev_warn(&client->dev, - "byte_len looks suspicious (no power of 2)!\n"); - if (!is_power_of_2(chip.page_size)) - dev_warn(&client->dev, - "page_size looks suspicious (no power of 2)!\n"); - - /* Use I2C operations unless we're stuck with SMBus extensions. */ - if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { - if (chip.flags & AT24_FLAG_ADDR16) { - err = -EPFNOSUPPORT; - goto err_out; - } - if (!i2c_check_functionality(client->adapter, - I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { - err = -EPFNOSUPPORT; - goto err_out; - } - use_smbus = true; - } - - if (chip.flags & AT24_FLAG_TAKE8ADDR) - num_addresses = 8; - else - num_addresses = DIV_ROUND_UP(chip.byte_len, - (chip.flags & AT24_FLAG_ADDR16) ? 65536 : 256); - - at24 = kzalloc(sizeof(struct at24_data) + - num_addresses * sizeof(struct i2c_client *), GFP_KERNEL); - if (!at24) { - err = -ENOMEM; - goto err_out; - } - - mutex_init(&at24->lock); - at24->use_smbus = use_smbus; - at24->chip = chip; - at24->num_addresses = num_addresses; - - /* - * Export the EEPROM bytes through sysfs, since that's convenient. - * By default, only root should see the data (maybe passwords etc) - */ - at24->bin.attr.name = "eeprom"; - at24->bin.attr.mode = chip.flags & AT24_FLAG_IRUGO ? S_IRUGO : S_IRUSR; - at24->bin.read = at24_bin_read; - at24->bin.size = chip.byte_len; - - writable = !(chip.flags & AT24_FLAG_READONLY); - if (writable) { - if (!use_smbus || i2c_check_functionality(client->adapter, - I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)) { - - unsigned write_max = chip.page_size; - - at24->bin.write = at24_bin_write; - at24->bin.attr.mode |= S_IWUSR; - - if (write_max > io_limit) - write_max = io_limit; - if (use_smbus && write_max > I2C_SMBUS_BLOCK_MAX) - write_max = I2C_SMBUS_BLOCK_MAX; - at24->write_max = write_max; - - /* buffer (data + address at the beginning) */ - at24->writebuf = kmalloc(write_max + 2, GFP_KERNEL); - if (!at24->writebuf) { - err = -ENOMEM; - goto err_struct; - } - } else { - dev_warn(&client->dev, - "cannot write due to controller restrictions."); - } - } - - at24->client[0] = client; - - /* use dummy devices for multiple-address chips */ - for (i = 1; i < num_addresses; i++) { - at24->client[i] = i2c_new_dummy(client->adapter, - client->addr + i); - if (!at24->client[i]) { - dev_err(&client->dev, "address 0x%02x unavailable\n", - client->addr + i); - err = -EADDRINUSE; - goto err_clients; - } - } - - err = sysfs_create_bin_file(&client->dev.kobj, &at24->bin); - if (err) - goto err_clients; - - i2c_set_clientdata(client, at24); - - dev_info(&client->dev, "%zu byte %s EEPROM %s\n", - at24->bin.size, client->name, - writable ? "(writable)" : "(read-only)"); - dev_dbg(&client->dev, - "page_size %d, num_addresses %d, write_max %d%s\n", - chip.page_size, num_addresses, - at24->write_max, - use_smbus ? ", use_smbus" : ""); - - return 0; - -err_clients: - for (i = 1; i < num_addresses; i++) - if (at24->client[i]) - i2c_unregister_device(at24->client[i]); - - kfree(at24->writebuf); -err_struct: - kfree(at24); -err_out: - dev_dbg(&client->dev, "probe error %d\n", err); - return err; -} - -static int __devexit at24_remove(struct i2c_client *client) -{ - struct at24_data *at24; - int i; - - at24 = i2c_get_clientdata(client); - sysfs_remove_bin_file(&client->dev.kobj, &at24->bin); - - for (i = 1; i < at24->num_addresses; i++) - i2c_unregister_device(at24->client[i]); - - kfree(at24->writebuf); - kfree(at24); - i2c_set_clientdata(client, NULL); - return 0; -} - -/*-------------------------------------------------------------------------*/ - -static struct i2c_driver at24_driver = { - .driver = { - .name = "at24", - .owner = THIS_MODULE, - }, - .probe = at24_probe, - .remove = __devexit_p(at24_remove), - .id_table = at24_ids, -}; - -static int __init at24_init(void) -{ - io_limit = rounddown_pow_of_two(io_limit); - return i2c_add_driver(&at24_driver); -} -module_init(at24_init); - -static void __exit at24_exit(void) -{ - i2c_del_driver(&at24_driver); -} -module_exit(at24_exit); - -MODULE_DESCRIPTION("Driver for most I2C EEPROMs"); -MODULE_AUTHOR("David Brownell and Wolfram Sang"); -MODULE_LICENSE("GPL"); diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 419c378bd24b..6c9cd9d30087 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -231,5 +231,6 @@ config DELL_LAPTOP laptops. source "drivers/misc/c2port/Kconfig" +source "drivers/misc/eeprom/Kconfig" endif # MISC_DEVICES diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index d5749a7bc777..0ec23203c994 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -20,3 +20,4 @@ obj-$(CONFIG_SGI_XP) += sgi-xp/ obj-$(CONFIG_SGI_GRU) += sgi-gru/ obj-$(CONFIG_HP_ILO) += hpilo.o obj-$(CONFIG_C2PORT) += c2port/ +obj-y += eeprom/ diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig new file mode 100644 index 000000000000..0b21778b7d13 --- /dev/null +++ b/drivers/misc/eeprom/Kconfig @@ -0,0 +1,29 @@ +menu "EEPROM support" + +config AT24 + tristate "I2C EEPROMs from most vendors" + depends on I2C && SYSFS && EXPERIMENTAL + help + Enable this driver to get read/write support to most I2C EEPROMs, + after you configure the driver to know about each EEPROM on + your target board. Use these generic chip names, instead of + vendor-specific ones like at24c64 or 24lc02: + + 24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08, + 24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024 + + Unless you like data loss puzzles, always be sure that any chip + you configure as a 24c32 (32 kbit) or larger is NOT really a + 24c16 (16 kbit) or smaller, and vice versa. Marking the chip + as read-only won't help recover from this. Also, if your chip + has any software write-protect mechanism you may want to review the + code to make sure this driver won't turn it on by accident. + + If you use this with an SMBus adapter instead of an I2C adapter, + full functionality is not available. Only smaller devices are + supported (24c16 and below, max 4 kByte). + + This driver can also be built as a module. If so, the module + will be called at24. + +endmenu diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile new file mode 100644 index 000000000000..72cd478eb53f --- /dev/null +++ b/drivers/misc/eeprom/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_AT24) += at24.o diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c new file mode 100644 index 000000000000..d4775528abc6 --- /dev/null +++ b/drivers/misc/eeprom/at24.c @@ -0,0 +1,582 @@ +/* + * at24.c - handle most I2C EEPROMs + * + * Copyright (C) 2005-2007 David Brownell + * Copyright (C) 2008 Wolfram Sang, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * I2C EEPROMs from most vendors are inexpensive and mostly interchangeable. + * Differences between different vendor product lines (like Atmel AT24C or + * MicroChip 24LC, etc) won't much matter for typical read/write access. + * There are also I2C RAM chips, likewise interchangeable. One example + * would be the PCF8570, which acts like a 24c02 EEPROM (256 bytes). + * + * However, misconfiguration can lose data. "Set 16-bit memory address" + * to a part with 8-bit addressing will overwrite data. Writing with too + * big a page size also loses data. And it's not safe to assume that the + * conventional addresses 0x50..0x57 only hold eeproms; a PCF8563 RTC + * uses 0x51, for just one example. + * + * Accordingly, explicit board-specific configuration data should be used + * in almost all cases. (One partial exception is an SMBus used to access + * "SPD" data for DRAM sticks. Those only use 24c02 EEPROMs.) + * + * So this driver uses "new style" I2C driver binding, expecting to be + * told what devices exist. That may be in arch/X/mach-Y/board-Z.c or + * similar kernel-resident tables; or, configuration data coming from + * a bootloader. + * + * Other than binding model, current differences from "eeprom" driver are + * that this one handles write access and isn't restricted to 24c02 devices. + * It also handles larger devices (32 kbit and up) with two-byte addresses, + * which won't work on pure SMBus systems. + */ + +struct at24_data { + struct at24_platform_data chip; + bool use_smbus; + + /* + * Lock protects against activities from other Linux tasks, + * but not from changes by other I2C masters. + */ + struct mutex lock; + struct bin_attribute bin; + + u8 *writebuf; + unsigned write_max; + unsigned num_addresses; + + /* + * Some chips tie up multiple I2C addresses; dummy devices reserve + * them for us, and we'll use them with SMBus calls. + */ + struct i2c_client *client[]; +}; + +/* + * This parameter is to help this driver avoid blocking other drivers out + * of I2C for potentially troublesome amounts of time. With a 100 kHz I2C + * clock, one 256 byte read takes about 1/43 second which is excessive; + * but the 1/170 second it takes at 400 kHz may be quite reasonable; and + * at 1 MHz (Fm+) a 1/430 second delay could easily be invisible. + * + * This value is forced to be a power of two so that writes align on pages. + */ +static unsigned io_limit = 128; +module_param(io_limit, uint, 0); +MODULE_PARM_DESC(io_limit, "Maximum bytes per I/O (default 128)"); + +/* + * Specs often allow 5 msec for a page write, sometimes 20 msec; + * it's important to recover from write timeouts. + */ +static unsigned write_timeout = 25; +module_param(write_timeout, uint, 0); +MODULE_PARM_DESC(write_timeout, "Time (in ms) to try writes (default 25)"); + +#define AT24_SIZE_BYTELEN 5 +#define AT24_SIZE_FLAGS 8 + +#define AT24_BITMASK(x) (BIT(x) - 1) + +/* create non-zero magic value for given eeprom parameters */ +#define AT24_DEVICE_MAGIC(_len, _flags) \ + ((1 << AT24_SIZE_FLAGS | (_flags)) \ + << AT24_SIZE_BYTELEN | ilog2(_len)) + +static const struct i2c_device_id at24_ids[] = { + /* needs 8 addresses as A0-A2 are ignored */ + { "24c00", AT24_DEVICE_MAGIC(128 / 8, AT24_FLAG_TAKE8ADDR) }, + /* old variants can't be handled with this generic entry! */ + { "24c01", AT24_DEVICE_MAGIC(1024 / 8, 0) }, + { "24c02", AT24_DEVICE_MAGIC(2048 / 8, 0) }, + /* spd is a 24c02 in memory DIMMs */ + { "spd", AT24_DEVICE_MAGIC(2048 / 8, + AT24_FLAG_READONLY | AT24_FLAG_IRUGO) }, + { "24c04", AT24_DEVICE_MAGIC(4096 / 8, 0) }, + /* 24rf08 quirk is handled at i2c-core */ + { "24c08", AT24_DEVICE_MAGIC(8192 / 8, 0) }, + { "24c16", AT24_DEVICE_MAGIC(16384 / 8, 0) }, + { "24c32", AT24_DEVICE_MAGIC(32768 / 8, AT24_FLAG_ADDR16) }, + { "24c64", AT24_DEVICE_MAGIC(65536 / 8, AT24_FLAG_ADDR16) }, + { "24c128", AT24_DEVICE_MAGIC(131072 / 8, AT24_FLAG_ADDR16) }, + { "24c256", AT24_DEVICE_MAGIC(262144 / 8, AT24_FLAG_ADDR16) }, + { "24c512", AT24_DEVICE_MAGIC(524288 / 8, AT24_FLAG_ADDR16) }, + { "24c1024", AT24_DEVICE_MAGIC(1048576 / 8, AT24_FLAG_ADDR16) }, + { "at24", 0 }, + { /* END OF LIST */ } +}; +MODULE_DEVICE_TABLE(i2c, at24_ids); + +/*-------------------------------------------------------------------------*/ + +/* + * This routine supports chips which consume multiple I2C addresses. It + * computes the addressing information to be used for a given r/w request. + * Assumes that sanity checks for offset happened at sysfs-layer. + */ +static struct i2c_client *at24_translate_offset(struct at24_data *at24, + unsigned *offset) +{ + unsigned i; + + if (at24->chip.flags & AT24_FLAG_ADDR16) { + i = *offset >> 16; + *offset &= 0xffff; + } else { + i = *offset >> 8; + *offset &= 0xff; + } + + return at24->client[i]; +} + +static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf, + unsigned offset, size_t count) +{ + struct i2c_msg msg[2]; + u8 msgbuf[2]; + struct i2c_client *client; + int status, i; + + memset(msg, 0, sizeof(msg)); + + /* + * REVISIT some multi-address chips don't rollover page reads to + * the next slave address, so we may need to truncate the count. + * Those chips might need another quirk flag. + * + * If the real hardware used four adjacent 24c02 chips and that + * were misconfigured as one 24c08, that would be a similar effect: + * one "eeprom" file not four, but larger reads would fail when + * they crossed certain pages. + */ + + /* + * Slave address and byte offset derive from the offset. Always + * set the byte address; on a multi-master board, another master + * may have changed the chip's "current" address pointer. + */ + client = at24_translate_offset(at24, &offset); + + if (count > io_limit) + count = io_limit; + + /* Smaller eeproms can work given some SMBus extension calls */ + if (at24->use_smbus) { + if (count > I2C_SMBUS_BLOCK_MAX) + count = I2C_SMBUS_BLOCK_MAX; + status = i2c_smbus_read_i2c_block_data(client, offset, + count, buf); + dev_dbg(&client->dev, "smbus read %zu@%d --> %d\n", + count, offset, status); + return (status < 0) ? -EIO : status; + } + + /* + * When we have a better choice than SMBus calls, use a combined + * I2C message. Write address; then read up to io_limit data bytes. + * Note that read page rollover helps us here (unlike writes). + * msgbuf is u8 and will cast to our needs. + */ + i = 0; + if (at24->chip.flags & AT24_FLAG_ADDR16) + msgbuf[i++] = offset >> 8; + msgbuf[i++] = offset; + + msg[0].addr = client->addr; + msg[0].buf = msgbuf; + msg[0].len = i; + + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].buf = buf; + msg[1].len = count; + + status = i2c_transfer(client->adapter, msg, 2); + dev_dbg(&client->dev, "i2c read %zu@%d --> %d\n", + count, offset, status); + + if (status == 2) + return count; + else if (status >= 0) + return -EIO; + else + return status; +} + +static ssize_t at24_bin_read(struct kobject *kobj, struct bin_attribute *attr, + char *buf, loff_t off, size_t count) +{ + struct at24_data *at24; + ssize_t retval = 0; + + at24 = dev_get_drvdata(container_of(kobj, struct device, kobj)); + + if (unlikely(!count)) + return count; + + /* + * Read data from chip, protecting against concurrent updates + * from this host, but not from other I2C masters. + */ + mutex_lock(&at24->lock); + + while (count) { + ssize_t status; + + status = at24_eeprom_read(at24, buf, off, count); + if (status <= 0) { + if (retval == 0) + retval = status; + break; + } + buf += status; + off += status; + count -= status; + retval += status; + } + + mutex_unlock(&at24->lock); + + return retval; +} + + +/* + * REVISIT: export at24_bin{read,write}() to let other kernel code use + * eeprom data. For example, it might hold a board's Ethernet address, or + * board-specific calibration data generated on the manufacturing floor. + */ + + +/* + * Note that if the hardware write-protect pin is pulled high, the whole + * chip is normally write protected. But there are plenty of product + * variants here, including OTP fuses and partial chip protect. + * + * We only use page mode writes; the alternative is sloooow. This routine + * writes at most one page. + */ +static ssize_t at24_eeprom_write(struct at24_data *at24, char *buf, + unsigned offset, size_t count) +{ + struct i2c_client *client; + struct i2c_msg msg; + ssize_t status; + unsigned long timeout, write_time; + unsigned next_page; + + /* Get corresponding I2C address and adjust offset */ + client = at24_translate_offset(at24, &offset); + + /* write_max is at most a page */ + if (count > at24->write_max) + count = at24->write_max; + + /* Never roll over backwards, to the start of this page */ + next_page = roundup(offset + 1, at24->chip.page_size); + if (offset + count > next_page) + count = next_page - offset; + + /* If we'll use I2C calls for I/O, set up the message */ + if (!at24->use_smbus) { + int i = 0; + + msg.addr = client->addr; + msg.flags = 0; + + /* msg.buf is u8 and casts will mask the values */ + msg.buf = at24->writebuf; + if (at24->chip.flags & AT24_FLAG_ADDR16) + msg.buf[i++] = offset >> 8; + + msg.buf[i++] = offset; + memcpy(&msg.buf[i], buf, count); + msg.len = i + count; + } + + /* + * Writes fail if the previous one didn't complete yet. We may + * loop a few times until this one succeeds, waiting at least + * long enough for one entire page write to work. + */ + timeout = jiffies + msecs_to_jiffies(write_timeout); + do { + write_time = jiffies; + if (at24->use_smbus) { + status = i2c_smbus_write_i2c_block_data(client, + offset, count, buf); + if (status == 0) + status = count; + } else { + status = i2c_transfer(client->adapter, &msg, 1); + if (status == 1) + status = count; + } + dev_dbg(&client->dev, "write %zu@%d --> %zd (%ld)\n", + count, offset, status, jiffies); + + if (status == count) + return count; + + /* REVISIT: at HZ=100, this is sloooow */ + msleep(1); + } while (time_before(write_time, timeout)); + + return -ETIMEDOUT; +} + +static ssize_t at24_bin_write(struct kobject *kobj, struct bin_attribute *attr, + char *buf, loff_t off, size_t count) +{ + struct at24_data *at24; + ssize_t retval = 0; + + at24 = dev_get_drvdata(container_of(kobj, struct device, kobj)); + + if (unlikely(!count)) + return count; + + /* + * Write data to chip, protecting against concurrent updates + * from this host, but not from other I2C masters. + */ + mutex_lock(&at24->lock); + + while (count) { + ssize_t status; + + status = at24_eeprom_write(at24, buf, off, count); + if (status <= 0) { + if (retval == 0) + retval = status; + break; + } + buf += status; + off += status; + count -= status; + retval += status; + } + + mutex_unlock(&at24->lock); + + return retval; +} + +/*-------------------------------------------------------------------------*/ + +static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct at24_platform_data chip; + bool writable; + bool use_smbus = false; + struct at24_data *at24; + int err; + unsigned i, num_addresses; + kernel_ulong_t magic; + + if (client->dev.platform_data) { + chip = *(struct at24_platform_data *)client->dev.platform_data; + } else { + if (!id->driver_data) { + err = -ENODEV; + goto err_out; + } + magic = id->driver_data; + chip.byte_len = BIT(magic & AT24_BITMASK(AT24_SIZE_BYTELEN)); + magic >>= AT24_SIZE_BYTELEN; + chip.flags = magic & AT24_BITMASK(AT24_SIZE_FLAGS); + /* + * This is slow, but we can't know all eeproms, so we better + * play safe. Specifying custom eeprom-types via platform_data + * is recommended anyhow. + */ + chip.page_size = 1; + } + + if (!is_power_of_2(chip.byte_len)) + dev_warn(&client->dev, + "byte_len looks suspicious (no power of 2)!\n"); + if (!is_power_of_2(chip.page_size)) + dev_warn(&client->dev, + "page_size looks suspicious (no power of 2)!\n"); + + /* Use I2C operations unless we're stuck with SMBus extensions. */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + if (chip.flags & AT24_FLAG_ADDR16) { + err = -EPFNOSUPPORT; + goto err_out; + } + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { + err = -EPFNOSUPPORT; + goto err_out; + } + use_smbus = true; + } + + if (chip.flags & AT24_FLAG_TAKE8ADDR) + num_addresses = 8; + else + num_addresses = DIV_ROUND_UP(chip.byte_len, + (chip.flags & AT24_FLAG_ADDR16) ? 65536 : 256); + + at24 = kzalloc(sizeof(struct at24_data) + + num_addresses * sizeof(struct i2c_client *), GFP_KERNEL); + if (!at24) { + err = -ENOMEM; + goto err_out; + } + + mutex_init(&at24->lock); + at24->use_smbus = use_smbus; + at24->chip = chip; + at24->num_addresses = num_addresses; + + /* + * Export the EEPROM bytes through sysfs, since that's convenient. + * By default, only root should see the data (maybe passwords etc) + */ + at24->bin.attr.name = "eeprom"; + at24->bin.attr.mode = chip.flags & AT24_FLAG_IRUGO ? S_IRUGO : S_IRUSR; + at24->bin.read = at24_bin_read; + at24->bin.size = chip.byte_len; + + writable = !(chip.flags & AT24_FLAG_READONLY); + if (writable) { + if (!use_smbus || i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)) { + + unsigned write_max = chip.page_size; + + at24->bin.write = at24_bin_write; + at24->bin.attr.mode |= S_IWUSR; + + if (write_max > io_limit) + write_max = io_limit; + if (use_smbus && write_max > I2C_SMBUS_BLOCK_MAX) + write_max = I2C_SMBUS_BLOCK_MAX; + at24->write_max = write_max; + + /* buffer (data + address at the beginning) */ + at24->writebuf = kmalloc(write_max + 2, GFP_KERNEL); + if (!at24->writebuf) { + err = -ENOMEM; + goto err_struct; + } + } else { + dev_warn(&client->dev, + "cannot write due to controller restrictions."); + } + } + + at24->client[0] = client; + + /* use dummy devices for multiple-address chips */ + for (i = 1; i < num_addresses; i++) { + at24->client[i] = i2c_new_dummy(client->adapter, + client->addr + i); + if (!at24->client[i]) { + dev_err(&client->dev, "address 0x%02x unavailable\n", + client->addr + i); + err = -EADDRINUSE; + goto err_clients; + } + } + + err = sysfs_create_bin_file(&client->dev.kobj, &at24->bin); + if (err) + goto err_clients; + + i2c_set_clientdata(client, at24); + + dev_info(&client->dev, "%zu byte %s EEPROM %s\n", + at24->bin.size, client->name, + writable ? "(writable)" : "(read-only)"); + dev_dbg(&client->dev, + "page_size %d, num_addresses %d, write_max %d%s\n", + chip.page_size, num_addresses, + at24->write_max, + use_smbus ? ", use_smbus" : ""); + + return 0; + +err_clients: + for (i = 1; i < num_addresses; i++) + if (at24->client[i]) + i2c_unregister_device(at24->client[i]); + + kfree(at24->writebuf); +err_struct: + kfree(at24); +err_out: + dev_dbg(&client->dev, "probe error %d\n", err); + return err; +} + +static int __devexit at24_remove(struct i2c_client *client) +{ + struct at24_data *at24; + int i; + + at24 = i2c_get_clientdata(client); + sysfs_remove_bin_file(&client->dev.kobj, &at24->bin); + + for (i = 1; i < at24->num_addresses; i++) + i2c_unregister_device(at24->client[i]); + + kfree(at24->writebuf); + kfree(at24); + i2c_set_clientdata(client, NULL); + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static struct i2c_driver at24_driver = { + .driver = { + .name = "at24", + .owner = THIS_MODULE, + }, + .probe = at24_probe, + .remove = __devexit_p(at24_remove), + .id_table = at24_ids, +}; + +static int __init at24_init(void) +{ + io_limit = rounddown_pow_of_two(io_limit); + return i2c_add_driver(&at24_driver); +} +module_init(at24_init); + +static void __exit at24_exit(void) +{ + i2c_del_driver(&at24_driver); +} +module_exit(at24_exit); + +MODULE_DESCRIPTION("Driver for most I2C EEPROMs"); +MODULE_AUTHOR("David Brownell and Wolfram Sang"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 2e157888f132131f8877affd2785dcee4c227c1d Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 26 Jan 2009 21:19:53 +0100 Subject: i2c: Move old eeprom driver to /drivers/misc/eeprom Update Kconfig text to specify this driver as I2C. Signed-off-by: Wolfram Sang Signed-off-by: Jean Delvare --- drivers/i2c/chips/Kconfig | 11 -- drivers/i2c/chips/Makefile | 1 - drivers/i2c/chips/eeprom.c | 257 ------------------------------------------- drivers/misc/eeprom/Kconfig | 11 ++ drivers/misc/eeprom/Makefile | 1 + drivers/misc/eeprom/eeprom.c | 257 +++++++++++++++++++++++++++++++++++++++++++ 6 files changed, 269 insertions(+), 269 deletions(-) delete mode 100644 drivers/i2c/chips/eeprom.c create mode 100644 drivers/misc/eeprom/eeprom.c (limited to 'drivers') diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index b58e77056b2e..c80312c1f382 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -16,17 +16,6 @@ config DS1682 This driver can also be built as a module. If so, the module will be called ds1682. -config SENSORS_EEPROM - tristate "EEPROM reader" - depends on EXPERIMENTAL - help - If you say yes here you get read-only access to the EEPROM data - available on modern memory DIMMs and Sony Vaio laptops. Such - EEPROMs could theoretically be available on other devices as well. - - This driver can also be built as a module. If so, the module - will be called eeprom. - config SENSORS_PCF8574 tristate "Philips PCF8574 and PCF8574A (DEPRECATED)" depends on EXPERIMENTAL && GPIO_PCF857X = "n" diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index 5c14776eb76a..d142f238a2de 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -11,7 +11,6 @@ # obj-$(CONFIG_DS1682) += ds1682.o -obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o obj-$(CONFIG_SENSORS_MAX6875) += max6875.o obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c deleted file mode 100644 index 2c27193aeaa0..000000000000 --- a/drivers/i2c/chips/eeprom.c +++ /dev/null @@ -1,257 +0,0 @@ -/* - Copyright (C) 1998, 1999 Frodo Looijaard and - Philip Edelbrock - Copyright (C) 2003 Greg Kroah-Hartman - Copyright (C) 2003 IBM Corp. - Copyright (C) 2004 Jean Delvare - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#include -#include -#include -#include -#include -#include -#include - -/* Addresses to scan */ -static const unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54, - 0x55, 0x56, 0x57, I2C_CLIENT_END }; - -/* Insmod parameters */ -I2C_CLIENT_INSMOD_1(eeprom); - - -/* Size of EEPROM in bytes */ -#define EEPROM_SIZE 256 - -/* possible types of eeprom devices */ -enum eeprom_nature { - UNKNOWN, - VAIO, -}; - -/* Each client has this additional data */ -struct eeprom_data { - struct mutex update_lock; - u8 valid; /* bitfield, bit!=0 if slice is valid */ - unsigned long last_updated[8]; /* In jiffies, 8 slices */ - u8 data[EEPROM_SIZE]; /* Register values */ - enum eeprom_nature nature; -}; - - -static void eeprom_update_client(struct i2c_client *client, u8 slice) -{ - struct eeprom_data *data = i2c_get_clientdata(client); - int i; - - mutex_lock(&data->update_lock); - - if (!(data->valid & (1 << slice)) || - time_after(jiffies, data->last_updated[slice] + 300 * HZ)) { - dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice); - - if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { - for (i = slice << 5; i < (slice + 1) << 5; i += 32) - if (i2c_smbus_read_i2c_block_data(client, i, - 32, data->data + i) - != 32) - goto exit; - } else { - for (i = slice << 5; i < (slice + 1) << 5; i += 2) { - int word = i2c_smbus_read_word_data(client, i); - if (word < 0) - goto exit; - data->data[i] = word & 0xff; - data->data[i + 1] = word >> 8; - } - } - data->last_updated[slice] = jiffies; - data->valid |= (1 << slice); - } -exit: - mutex_unlock(&data->update_lock); -} - -static ssize_t eeprom_read(struct kobject *kobj, struct bin_attribute *bin_attr, - char *buf, loff_t off, size_t count) -{ - struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj)); - struct eeprom_data *data = i2c_get_clientdata(client); - u8 slice; - - if (off > EEPROM_SIZE) - return 0; - if (off + count > EEPROM_SIZE) - count = EEPROM_SIZE - off; - - /* Only refresh slices which contain requested bytes */ - for (slice = off >> 5; slice <= (off + count - 1) >> 5; slice++) - eeprom_update_client(client, slice); - - /* Hide Vaio private settings to regular users: - - BIOS passwords: bytes 0x00 to 0x0f - - UUID: bytes 0x10 to 0x1f - - Serial number: 0xc0 to 0xdf */ - if (data->nature == VAIO && !capable(CAP_SYS_ADMIN)) { - int i; - - for (i = 0; i < count; i++) { - if ((off + i <= 0x1f) || - (off + i >= 0xc0 && off + i <= 0xdf)) - buf[i] = 0; - else - buf[i] = data->data[off + i]; - } - } else { - memcpy(buf, &data->data[off], count); - } - - return count; -} - -static struct bin_attribute eeprom_attr = { - .attr = { - .name = "eeprom", - .mode = S_IRUGO, - }, - .size = EEPROM_SIZE, - .read = eeprom_read, -}; - -/* Return 0 if detection is successful, -ENODEV otherwise */ -static int eeprom_detect(struct i2c_client *client, int kind, - struct i2c_board_info *info) -{ - struct i2c_adapter *adapter = client->adapter; - - /* EDID EEPROMs are often 24C00 EEPROMs, which answer to all - addresses 0x50-0x57, but we only care about 0x50. So decline - attaching to addresses >= 0x51 on DDC buses */ - if (!(adapter->class & I2C_CLASS_SPD) && client->addr >= 0x51) - return -ENODEV; - - /* There are four ways we can read the EEPROM data: - (1) I2C block reads (faster, but unsupported by most adapters) - (2) Word reads (128% overhead) - (3) Consecutive byte reads (88% overhead, unsafe) - (4) Regular byte data reads (265% overhead) - The third and fourth methods are not implemented by this driver - because all known adapters support one of the first two. */ - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_WORD_DATA) - && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) - return -ENODEV; - - strlcpy(info->type, "eeprom", I2C_NAME_SIZE); - - return 0; -} - -static int eeprom_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct i2c_adapter *adapter = client->adapter; - struct eeprom_data *data; - int err; - - if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - memset(data->data, 0xff, EEPROM_SIZE); - i2c_set_clientdata(client, data); - mutex_init(&data->update_lock); - data->nature = UNKNOWN; - - /* Detect the Vaio nature of EEPROMs. - We use the "PCG-" or "VGN-" prefix as the signature. */ - if (client->addr == 0x57 - && i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA)) { - char name[4]; - - name[0] = i2c_smbus_read_byte_data(client, 0x80); - name[1] = i2c_smbus_read_byte_data(client, 0x81); - name[2] = i2c_smbus_read_byte_data(client, 0x82); - name[3] = i2c_smbus_read_byte_data(client, 0x83); - - if (!memcmp(name, "PCG-", 4) || !memcmp(name, "VGN-", 4)) { - dev_info(&client->dev, "Vaio EEPROM detected, " - "enabling privacy protection\n"); - data->nature = VAIO; - } - } - - /* create the sysfs eeprom file */ - err = sysfs_create_bin_file(&client->dev.kobj, &eeprom_attr); - if (err) - goto exit_kfree; - - return 0; - -exit_kfree: - kfree(data); -exit: - return err; -} - -static int eeprom_remove(struct i2c_client *client) -{ - sysfs_remove_bin_file(&client->dev.kobj, &eeprom_attr); - kfree(i2c_get_clientdata(client)); - - return 0; -} - -static const struct i2c_device_id eeprom_id[] = { - { "eeprom", 0 }, - { } -}; - -static struct i2c_driver eeprom_driver = { - .driver = { - .name = "eeprom", - }, - .probe = eeprom_probe, - .remove = eeprom_remove, - .id_table = eeprom_id, - - .class = I2C_CLASS_DDC | I2C_CLASS_SPD, - .detect = eeprom_detect, - .address_data = &addr_data, -}; - -static int __init eeprom_init(void) -{ - return i2c_add_driver(&eeprom_driver); -} - -static void __exit eeprom_exit(void) -{ - i2c_del_driver(&eeprom_driver); -} - - -MODULE_AUTHOR("Frodo Looijaard and " - "Philip Edelbrock and " - "Greg Kroah-Hartman "); -MODULE_DESCRIPTION("I2C EEPROM driver"); -MODULE_LICENSE("GPL"); - -module_init(eeprom_init); -module_exit(eeprom_exit); diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig index 0b21778b7d13..3d31b6644245 100644 --- a/drivers/misc/eeprom/Kconfig +++ b/drivers/misc/eeprom/Kconfig @@ -26,4 +26,15 @@ config AT24 This driver can also be built as a module. If so, the module will be called at24. +config SENSORS_EEPROM + tristate "Old I2C EEPROM reader" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get read-only access to the EEPROM data + available on modern memory DIMMs and Sony Vaio laptops via I2C. Such + EEPROMs could theoretically be available on other devices as well. + + This driver can also be built as a module. If so, the module + will be called eeprom. + endmenu diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile index 72cd478eb53f..a3dad28f2724 100644 --- a/drivers/misc/eeprom/Makefile +++ b/drivers/misc/eeprom/Makefile @@ -1 +1,2 @@ obj-$(CONFIG_AT24) += at24.o +obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o diff --git a/drivers/misc/eeprom/eeprom.c b/drivers/misc/eeprom/eeprom.c new file mode 100644 index 000000000000..2c27193aeaa0 --- /dev/null +++ b/drivers/misc/eeprom/eeprom.c @@ -0,0 +1,257 @@ +/* + Copyright (C) 1998, 1999 Frodo Looijaard and + Philip Edelbrock + Copyright (C) 2003 Greg Kroah-Hartman + Copyright (C) 2003 IBM Corp. + Copyright (C) 2004 Jean Delvare + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include +#include +#include +#include +#include + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54, + 0x55, 0x56, 0x57, I2C_CLIENT_END }; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD_1(eeprom); + + +/* Size of EEPROM in bytes */ +#define EEPROM_SIZE 256 + +/* possible types of eeprom devices */ +enum eeprom_nature { + UNKNOWN, + VAIO, +}; + +/* Each client has this additional data */ +struct eeprom_data { + struct mutex update_lock; + u8 valid; /* bitfield, bit!=0 if slice is valid */ + unsigned long last_updated[8]; /* In jiffies, 8 slices */ + u8 data[EEPROM_SIZE]; /* Register values */ + enum eeprom_nature nature; +}; + + +static void eeprom_update_client(struct i2c_client *client, u8 slice) +{ + struct eeprom_data *data = i2c_get_clientdata(client); + int i; + + mutex_lock(&data->update_lock); + + if (!(data->valid & (1 << slice)) || + time_after(jiffies, data->last_updated[slice] + 300 * HZ)) { + dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice); + + if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { + for (i = slice << 5; i < (slice + 1) << 5; i += 32) + if (i2c_smbus_read_i2c_block_data(client, i, + 32, data->data + i) + != 32) + goto exit; + } else { + for (i = slice << 5; i < (slice + 1) << 5; i += 2) { + int word = i2c_smbus_read_word_data(client, i); + if (word < 0) + goto exit; + data->data[i] = word & 0xff; + data->data[i + 1] = word >> 8; + } + } + data->last_updated[slice] = jiffies; + data->valid |= (1 << slice); + } +exit: + mutex_unlock(&data->update_lock); +} + +static ssize_t eeprom_read(struct kobject *kobj, struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj)); + struct eeprom_data *data = i2c_get_clientdata(client); + u8 slice; + + if (off > EEPROM_SIZE) + return 0; + if (off + count > EEPROM_SIZE) + count = EEPROM_SIZE - off; + + /* Only refresh slices which contain requested bytes */ + for (slice = off >> 5; slice <= (off + count - 1) >> 5; slice++) + eeprom_update_client(client, slice); + + /* Hide Vaio private settings to regular users: + - BIOS passwords: bytes 0x00 to 0x0f + - UUID: bytes 0x10 to 0x1f + - Serial number: 0xc0 to 0xdf */ + if (data->nature == VAIO && !capable(CAP_SYS_ADMIN)) { + int i; + + for (i = 0; i < count; i++) { + if ((off + i <= 0x1f) || + (off + i >= 0xc0 && off + i <= 0xdf)) + buf[i] = 0; + else + buf[i] = data->data[off + i]; + } + } else { + memcpy(buf, &data->data[off], count); + } + + return count; +} + +static struct bin_attribute eeprom_attr = { + .attr = { + .name = "eeprom", + .mode = S_IRUGO, + }, + .size = EEPROM_SIZE, + .read = eeprom_read, +}; + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int eeprom_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + + /* EDID EEPROMs are often 24C00 EEPROMs, which answer to all + addresses 0x50-0x57, but we only care about 0x50. So decline + attaching to addresses >= 0x51 on DDC buses */ + if (!(adapter->class & I2C_CLASS_SPD) && client->addr >= 0x51) + return -ENODEV; + + /* There are four ways we can read the EEPROM data: + (1) I2C block reads (faster, but unsupported by most adapters) + (2) Word reads (128% overhead) + (3) Consecutive byte reads (88% overhead, unsafe) + (4) Regular byte data reads (265% overhead) + The third and fourth methods are not implemented by this driver + because all known adapters support one of the first two. */ + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_WORD_DATA) + && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) + return -ENODEV; + + strlcpy(info->type, "eeprom", I2C_NAME_SIZE); + + return 0; +} + +static int eeprom_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct i2c_adapter *adapter = client->adapter; + struct eeprom_data *data; + int err; + + if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + + memset(data->data, 0xff, EEPROM_SIZE); + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + data->nature = UNKNOWN; + + /* Detect the Vaio nature of EEPROMs. + We use the "PCG-" or "VGN-" prefix as the signature. */ + if (client->addr == 0x57 + && i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA)) { + char name[4]; + + name[0] = i2c_smbus_read_byte_data(client, 0x80); + name[1] = i2c_smbus_read_byte_data(client, 0x81); + name[2] = i2c_smbus_read_byte_data(client, 0x82); + name[3] = i2c_smbus_read_byte_data(client, 0x83); + + if (!memcmp(name, "PCG-", 4) || !memcmp(name, "VGN-", 4)) { + dev_info(&client->dev, "Vaio EEPROM detected, " + "enabling privacy protection\n"); + data->nature = VAIO; + } + } + + /* create the sysfs eeprom file */ + err = sysfs_create_bin_file(&client->dev.kobj, &eeprom_attr); + if (err) + goto exit_kfree; + + return 0; + +exit_kfree: + kfree(data); +exit: + return err; +} + +static int eeprom_remove(struct i2c_client *client) +{ + sysfs_remove_bin_file(&client->dev.kobj, &eeprom_attr); + kfree(i2c_get_clientdata(client)); + + return 0; +} + +static const struct i2c_device_id eeprom_id[] = { + { "eeprom", 0 }, + { } +}; + +static struct i2c_driver eeprom_driver = { + .driver = { + .name = "eeprom", + }, + .probe = eeprom_probe, + .remove = eeprom_remove, + .id_table = eeprom_id, + + .class = I2C_CLASS_DDC | I2C_CLASS_SPD, + .detect = eeprom_detect, + .address_data = &addr_data, +}; + +static int __init eeprom_init(void) +{ + return i2c_add_driver(&eeprom_driver); +} + +static void __exit eeprom_exit(void) +{ + i2c_del_driver(&eeprom_driver); +} + + +MODULE_AUTHOR("Frodo Looijaard and " + "Philip Edelbrock and " + "Greg Kroah-Hartman "); +MODULE_DESCRIPTION("I2C EEPROM driver"); +MODULE_LICENSE("GPL"); + +module_init(eeprom_init); +module_exit(eeprom_exit); -- cgit v1.2.3 From e51d565ff6bb1cedc10568425511badf0633a212 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 26 Jan 2009 21:19:54 +0100 Subject: spi: Move at25 (for SPI eeproms) to /drivers/misc/eeprom Signed-off-by: Wolfram Sang Signed-off-by: Jean Delvare --- drivers/misc/eeprom/Kconfig | 11 ++ drivers/misc/eeprom/Makefile | 1 + drivers/misc/eeprom/at25.c | 389 +++++++++++++++++++++++++++++++++++++++++++ drivers/spi/Kconfig | 11 -- drivers/spi/Makefile | 1 - drivers/spi/at25.c | 389 ------------------------------------------- 6 files changed, 401 insertions(+), 401 deletions(-) create mode 100644 drivers/misc/eeprom/at25.c delete mode 100644 drivers/spi/at25.c (limited to 'drivers') diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig index 3d31b6644245..5bf3c92d7162 100644 --- a/drivers/misc/eeprom/Kconfig +++ b/drivers/misc/eeprom/Kconfig @@ -26,6 +26,17 @@ config AT24 This driver can also be built as a module. If so, the module will be called at24. +config SPI_AT25 + tristate "SPI EEPROMs from most vendors" + depends on SPI && SYSFS + help + Enable this driver to get read/write support to most SPI EEPROMs, + after you configure the board init code to know about each eeprom + on your target board. + + This driver can also be built as a module. If so, the module + will be called at25. + config SENSORS_EEPROM tristate "Old I2C EEPROM reader" depends on I2C && EXPERIMENTAL diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile index a3dad28f2724..a4fb5cf8ffe6 100644 --- a/drivers/misc/eeprom/Makefile +++ b/drivers/misc/eeprom/Makefile @@ -1,2 +1,3 @@ obj-$(CONFIG_AT24) += at24.o +obj-$(CONFIG_SPI_AT25) += at25.o obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c new file mode 100644 index 000000000000..290dbe99647a --- /dev/null +++ b/drivers/misc/eeprom/at25.c @@ -0,0 +1,389 @@ +/* + * at25.c -- support most SPI EEPROMs, such as Atmel AT25 models + * + * Copyright (C) 2006 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + + +/* + * NOTE: this is an *EEPROM* driver. The vagaries of product naming + * mean that some AT25 products are EEPROMs, and others are FLASH. + * Handle FLASH chips with the drivers/mtd/devices/m25p80.c driver, + * not this one! + */ + +struct at25_data { + struct spi_device *spi; + struct mutex lock; + struct spi_eeprom chip; + struct bin_attribute bin; + unsigned addrlen; +}; + +#define AT25_WREN 0x06 /* latch the write enable */ +#define AT25_WRDI 0x04 /* reset the write enable */ +#define AT25_RDSR 0x05 /* read status register */ +#define AT25_WRSR 0x01 /* write status register */ +#define AT25_READ 0x03 /* read byte(s) */ +#define AT25_WRITE 0x02 /* write byte(s)/sector */ + +#define AT25_SR_nRDY 0x01 /* nRDY = write-in-progress */ +#define AT25_SR_WEN 0x02 /* write enable (latched) */ +#define AT25_SR_BP0 0x04 /* BP for software writeprotect */ +#define AT25_SR_BP1 0x08 +#define AT25_SR_WPEN 0x80 /* writeprotect enable */ + + +#define EE_MAXADDRLEN 3 /* 24 bit addresses, up to 2 MBytes */ + +/* Specs often allow 5 msec for a page write, sometimes 20 msec; + * it's important to recover from write timeouts. + */ +#define EE_TIMEOUT 25 + +/*-------------------------------------------------------------------------*/ + +#define io_limit PAGE_SIZE /* bytes */ + +static ssize_t +at25_ee_read( + struct at25_data *at25, + char *buf, + unsigned offset, + size_t count +) +{ + u8 command[EE_MAXADDRLEN + 1]; + u8 *cp; + ssize_t status; + struct spi_transfer t[2]; + struct spi_message m; + + cp = command; + *cp++ = AT25_READ; + + /* 8/16/24-bit address is written MSB first */ + switch (at25->addrlen) { + default: /* case 3 */ + *cp++ = offset >> 16; + case 2: + *cp++ = offset >> 8; + case 1: + case 0: /* can't happen: for better codegen */ + *cp++ = offset >> 0; + } + + spi_message_init(&m); + memset(t, 0, sizeof t); + + t[0].tx_buf = command; + t[0].len = at25->addrlen + 1; + spi_message_add_tail(&t[0], &m); + + t[1].rx_buf = buf; + t[1].len = count; + spi_message_add_tail(&t[1], &m); + + mutex_lock(&at25->lock); + + /* Read it all at once. + * + * REVISIT that's potentially a problem with large chips, if + * other devices on the bus need to be accessed regularly or + * this chip is clocked very slowly + */ + status = spi_sync(at25->spi, &m); + dev_dbg(&at25->spi->dev, + "read %Zd bytes at %d --> %d\n", + count, offset, (int) status); + + mutex_unlock(&at25->lock); + return status ? status : count; +} + +static ssize_t +at25_bin_read(struct kobject *kobj, struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct device *dev; + struct at25_data *at25; + + dev = container_of(kobj, struct device, kobj); + at25 = dev_get_drvdata(dev); + + if (unlikely(off >= at25->bin.size)) + return 0; + if ((off + count) > at25->bin.size) + count = at25->bin.size - off; + if (unlikely(!count)) + return count; + + return at25_ee_read(at25, buf, off, count); +} + + +static ssize_t +at25_ee_write(struct at25_data *at25, char *buf, loff_t off, size_t count) +{ + ssize_t status = 0; + unsigned written = 0; + unsigned buf_size; + u8 *bounce; + + /* Temp buffer starts with command and address */ + buf_size = at25->chip.page_size; + if (buf_size > io_limit) + buf_size = io_limit; + bounce = kmalloc(buf_size + at25->addrlen + 1, GFP_KERNEL); + if (!bounce) + return -ENOMEM; + + /* For write, rollover is within the page ... so we write at + * most one page, then manually roll over to the next page. + */ + bounce[0] = AT25_WRITE; + mutex_lock(&at25->lock); + do { + unsigned long timeout, retries; + unsigned segment; + unsigned offset = (unsigned) off; + u8 *cp = bounce + 1; + + *cp = AT25_WREN; + status = spi_write(at25->spi, cp, 1); + if (status < 0) { + dev_dbg(&at25->spi->dev, "WREN --> %d\n", + (int) status); + break; + } + + /* 8/16/24-bit address is written MSB first */ + switch (at25->addrlen) { + default: /* case 3 */ + *cp++ = offset >> 16; + case 2: + *cp++ = offset >> 8; + case 1: + case 0: /* can't happen: for better codegen */ + *cp++ = offset >> 0; + } + + /* Write as much of a page as we can */ + segment = buf_size - (offset % buf_size); + if (segment > count) + segment = count; + memcpy(cp, buf, segment); + status = spi_write(at25->spi, bounce, + segment + at25->addrlen + 1); + dev_dbg(&at25->spi->dev, + "write %u bytes at %u --> %d\n", + segment, offset, (int) status); + if (status < 0) + break; + + /* REVISIT this should detect (or prevent) failed writes + * to readonly sections of the EEPROM... + */ + + /* Wait for non-busy status */ + timeout = jiffies + msecs_to_jiffies(EE_TIMEOUT); + retries = 0; + do { + int sr; + + sr = spi_w8r8(at25->spi, AT25_RDSR); + if (sr < 0 || (sr & AT25_SR_nRDY)) { + dev_dbg(&at25->spi->dev, + "rdsr --> %d (%02x)\n", sr, sr); + /* at HZ=100, this is sloooow */ + msleep(1); + continue; + } + if (!(sr & AT25_SR_nRDY)) + break; + } while (retries++ < 3 || time_before_eq(jiffies, timeout)); + + if (time_after(jiffies, timeout)) { + dev_err(&at25->spi->dev, + "write %d bytes offset %d, " + "timeout after %u msecs\n", + segment, offset, + jiffies_to_msecs(jiffies - + (timeout - EE_TIMEOUT))); + status = -ETIMEDOUT; + break; + } + + off += segment; + buf += segment; + count -= segment; + written += segment; + + } while (count > 0); + + mutex_unlock(&at25->lock); + + kfree(bounce); + return written ? written : status; +} + +static ssize_t +at25_bin_write(struct kobject *kobj, struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct device *dev; + struct at25_data *at25; + + dev = container_of(kobj, struct device, kobj); + at25 = dev_get_drvdata(dev); + + if (unlikely(off >= at25->bin.size)) + return -EFBIG; + if ((off + count) > at25->bin.size) + count = at25->bin.size - off; + if (unlikely(!count)) + return count; + + return at25_ee_write(at25, buf, off, count); +} + +/*-------------------------------------------------------------------------*/ + +static int at25_probe(struct spi_device *spi) +{ + struct at25_data *at25 = NULL; + const struct spi_eeprom *chip; + int err; + int sr; + int addrlen; + + /* Chip description */ + chip = spi->dev.platform_data; + if (!chip) { + dev_dbg(&spi->dev, "no chip description\n"); + err = -ENODEV; + goto fail; + } + + /* For now we only support 8/16/24 bit addressing */ + if (chip->flags & EE_ADDR1) + addrlen = 1; + else if (chip->flags & EE_ADDR2) + addrlen = 2; + else if (chip->flags & EE_ADDR3) + addrlen = 3; + else { + dev_dbg(&spi->dev, "unsupported address type\n"); + err = -EINVAL; + goto fail; + } + + /* Ping the chip ... the status register is pretty portable, + * unlike probing manufacturer IDs. We do expect that system + * firmware didn't write it in the past few milliseconds! + */ + sr = spi_w8r8(spi, AT25_RDSR); + if (sr < 0 || sr & AT25_SR_nRDY) { + dev_dbg(&spi->dev, "rdsr --> %d (%02x)\n", sr, sr); + err = -ENXIO; + goto fail; + } + + if (!(at25 = kzalloc(sizeof *at25, GFP_KERNEL))) { + err = -ENOMEM; + goto fail; + } + + mutex_init(&at25->lock); + at25->chip = *chip; + at25->spi = spi_dev_get(spi); + dev_set_drvdata(&spi->dev, at25); + at25->addrlen = addrlen; + + /* Export the EEPROM bytes through sysfs, since that's convenient. + * Default to root-only access to the data; EEPROMs often hold data + * that's sensitive for read and/or write, like ethernet addresses, + * security codes, board-specific manufacturing calibrations, etc. + */ + at25->bin.attr.name = "eeprom"; + at25->bin.attr.mode = S_IRUSR; + at25->bin.read = at25_bin_read; + + at25->bin.size = at25->chip.byte_len; + if (!(chip->flags & EE_READONLY)) { + at25->bin.write = at25_bin_write; + at25->bin.attr.mode |= S_IWUSR; + } + + err = sysfs_create_bin_file(&spi->dev.kobj, &at25->bin); + if (err) + goto fail; + + dev_info(&spi->dev, "%Zd %s %s eeprom%s, pagesize %u\n", + (at25->bin.size < 1024) + ? at25->bin.size + : (at25->bin.size / 1024), + (at25->bin.size < 1024) ? "Byte" : "KByte", + at25->chip.name, + (chip->flags & EE_READONLY) ? " (readonly)" : "", + at25->chip.page_size); + return 0; +fail: + dev_dbg(&spi->dev, "probe err %d\n", err); + kfree(at25); + return err; +} + +static int __devexit at25_remove(struct spi_device *spi) +{ + struct at25_data *at25; + + at25 = dev_get_drvdata(&spi->dev); + sysfs_remove_bin_file(&spi->dev.kobj, &at25->bin); + kfree(at25); + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static struct spi_driver at25_driver = { + .driver = { + .name = "at25", + .owner = THIS_MODULE, + }, + .probe = at25_probe, + .remove = __devexit_p(at25_remove), +}; + +static int __init at25_init(void) +{ + return spi_register_driver(&at25_driver); +} +module_init(at25_init); + +static void __exit at25_exit(void) +{ + spi_unregister_driver(&at25_driver); +} +module_exit(at25_exit); + +MODULE_DESCRIPTION("Driver for most SPI EEPROMs"); +MODULE_AUTHOR("David Brownell"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 4a6fe01831a8..83a185d52961 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -230,17 +230,6 @@ config SPI_XILINX # comment "SPI Protocol Masters" -config SPI_AT25 - tristate "SPI EEPROMs from most vendors" - depends on SYSFS - help - Enable this driver to get read/write support to most SPI EEPROMs, - after you configure the board init code to know about each eeprom - on your target board. - - This driver can also be built as a module. If so, the module - will be called at25. - config SPI_SPIDEV tristate "User mode SPI device driver support" depends on EXPERIMENTAL diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 5e9f521b8844..5d0451936d86 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -33,7 +33,6 @@ obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o # ... add above this line ... # SPI protocol drivers (device/link on bus) -obj-$(CONFIG_SPI_AT25) += at25.o obj-$(CONFIG_SPI_SPIDEV) += spidev.o obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o # ... add above this line ... diff --git a/drivers/spi/at25.c b/drivers/spi/at25.c deleted file mode 100644 index 290dbe99647a..000000000000 --- a/drivers/spi/at25.c +++ /dev/null @@ -1,389 +0,0 @@ -/* - * at25.c -- support most SPI EEPROMs, such as Atmel AT25 models - * - * Copyright (C) 2006 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include - - -/* - * NOTE: this is an *EEPROM* driver. The vagaries of product naming - * mean that some AT25 products are EEPROMs, and others are FLASH. - * Handle FLASH chips with the drivers/mtd/devices/m25p80.c driver, - * not this one! - */ - -struct at25_data { - struct spi_device *spi; - struct mutex lock; - struct spi_eeprom chip; - struct bin_attribute bin; - unsigned addrlen; -}; - -#define AT25_WREN 0x06 /* latch the write enable */ -#define AT25_WRDI 0x04 /* reset the write enable */ -#define AT25_RDSR 0x05 /* read status register */ -#define AT25_WRSR 0x01 /* write status register */ -#define AT25_READ 0x03 /* read byte(s) */ -#define AT25_WRITE 0x02 /* write byte(s)/sector */ - -#define AT25_SR_nRDY 0x01 /* nRDY = write-in-progress */ -#define AT25_SR_WEN 0x02 /* write enable (latched) */ -#define AT25_SR_BP0 0x04 /* BP for software writeprotect */ -#define AT25_SR_BP1 0x08 -#define AT25_SR_WPEN 0x80 /* writeprotect enable */ - - -#define EE_MAXADDRLEN 3 /* 24 bit addresses, up to 2 MBytes */ - -/* Specs often allow 5 msec for a page write, sometimes 20 msec; - * it's important to recover from write timeouts. - */ -#define EE_TIMEOUT 25 - -/*-------------------------------------------------------------------------*/ - -#define io_limit PAGE_SIZE /* bytes */ - -static ssize_t -at25_ee_read( - struct at25_data *at25, - char *buf, - unsigned offset, - size_t count -) -{ - u8 command[EE_MAXADDRLEN + 1]; - u8 *cp; - ssize_t status; - struct spi_transfer t[2]; - struct spi_message m; - - cp = command; - *cp++ = AT25_READ; - - /* 8/16/24-bit address is written MSB first */ - switch (at25->addrlen) { - default: /* case 3 */ - *cp++ = offset >> 16; - case 2: - *cp++ = offset >> 8; - case 1: - case 0: /* can't happen: for better codegen */ - *cp++ = offset >> 0; - } - - spi_message_init(&m); - memset(t, 0, sizeof t); - - t[0].tx_buf = command; - t[0].len = at25->addrlen + 1; - spi_message_add_tail(&t[0], &m); - - t[1].rx_buf = buf; - t[1].len = count; - spi_message_add_tail(&t[1], &m); - - mutex_lock(&at25->lock); - - /* Read it all at once. - * - * REVISIT that's potentially a problem with large chips, if - * other devices on the bus need to be accessed regularly or - * this chip is clocked very slowly - */ - status = spi_sync(at25->spi, &m); - dev_dbg(&at25->spi->dev, - "read %Zd bytes at %d --> %d\n", - count, offset, (int) status); - - mutex_unlock(&at25->lock); - return status ? status : count; -} - -static ssize_t -at25_bin_read(struct kobject *kobj, struct bin_attribute *bin_attr, - char *buf, loff_t off, size_t count) -{ - struct device *dev; - struct at25_data *at25; - - dev = container_of(kobj, struct device, kobj); - at25 = dev_get_drvdata(dev); - - if (unlikely(off >= at25->bin.size)) - return 0; - if ((off + count) > at25->bin.size) - count = at25->bin.size - off; - if (unlikely(!count)) - return count; - - return at25_ee_read(at25, buf, off, count); -} - - -static ssize_t -at25_ee_write(struct at25_data *at25, char *buf, loff_t off, size_t count) -{ - ssize_t status = 0; - unsigned written = 0; - unsigned buf_size; - u8 *bounce; - - /* Temp buffer starts with command and address */ - buf_size = at25->chip.page_size; - if (buf_size > io_limit) - buf_size = io_limit; - bounce = kmalloc(buf_size + at25->addrlen + 1, GFP_KERNEL); - if (!bounce) - return -ENOMEM; - - /* For write, rollover is within the page ... so we write at - * most one page, then manually roll over to the next page. - */ - bounce[0] = AT25_WRITE; - mutex_lock(&at25->lock); - do { - unsigned long timeout, retries; - unsigned segment; - unsigned offset = (unsigned) off; - u8 *cp = bounce + 1; - - *cp = AT25_WREN; - status = spi_write(at25->spi, cp, 1); - if (status < 0) { - dev_dbg(&at25->spi->dev, "WREN --> %d\n", - (int) status); - break; - } - - /* 8/16/24-bit address is written MSB first */ - switch (at25->addrlen) { - default: /* case 3 */ - *cp++ = offset >> 16; - case 2: - *cp++ = offset >> 8; - case 1: - case 0: /* can't happen: for better codegen */ - *cp++ = offset >> 0; - } - - /* Write as much of a page as we can */ - segment = buf_size - (offset % buf_size); - if (segment > count) - segment = count; - memcpy(cp, buf, segment); - status = spi_write(at25->spi, bounce, - segment + at25->addrlen + 1); - dev_dbg(&at25->spi->dev, - "write %u bytes at %u --> %d\n", - segment, offset, (int) status); - if (status < 0) - break; - - /* REVISIT this should detect (or prevent) failed writes - * to readonly sections of the EEPROM... - */ - - /* Wait for non-busy status */ - timeout = jiffies + msecs_to_jiffies(EE_TIMEOUT); - retries = 0; - do { - int sr; - - sr = spi_w8r8(at25->spi, AT25_RDSR); - if (sr < 0 || (sr & AT25_SR_nRDY)) { - dev_dbg(&at25->spi->dev, - "rdsr --> %d (%02x)\n", sr, sr); - /* at HZ=100, this is sloooow */ - msleep(1); - continue; - } - if (!(sr & AT25_SR_nRDY)) - break; - } while (retries++ < 3 || time_before_eq(jiffies, timeout)); - - if (time_after(jiffies, timeout)) { - dev_err(&at25->spi->dev, - "write %d bytes offset %d, " - "timeout after %u msecs\n", - segment, offset, - jiffies_to_msecs(jiffies - - (timeout - EE_TIMEOUT))); - status = -ETIMEDOUT; - break; - } - - off += segment; - buf += segment; - count -= segment; - written += segment; - - } while (count > 0); - - mutex_unlock(&at25->lock); - - kfree(bounce); - return written ? written : status; -} - -static ssize_t -at25_bin_write(struct kobject *kobj, struct bin_attribute *bin_attr, - char *buf, loff_t off, size_t count) -{ - struct device *dev; - struct at25_data *at25; - - dev = container_of(kobj, struct device, kobj); - at25 = dev_get_drvdata(dev); - - if (unlikely(off >= at25->bin.size)) - return -EFBIG; - if ((off + count) > at25->bin.size) - count = at25->bin.size - off; - if (unlikely(!count)) - return count; - - return at25_ee_write(at25, buf, off, count); -} - -/*-------------------------------------------------------------------------*/ - -static int at25_probe(struct spi_device *spi) -{ - struct at25_data *at25 = NULL; - const struct spi_eeprom *chip; - int err; - int sr; - int addrlen; - - /* Chip description */ - chip = spi->dev.platform_data; - if (!chip) { - dev_dbg(&spi->dev, "no chip description\n"); - err = -ENODEV; - goto fail; - } - - /* For now we only support 8/16/24 bit addressing */ - if (chip->flags & EE_ADDR1) - addrlen = 1; - else if (chip->flags & EE_ADDR2) - addrlen = 2; - else if (chip->flags & EE_ADDR3) - addrlen = 3; - else { - dev_dbg(&spi->dev, "unsupported address type\n"); - err = -EINVAL; - goto fail; - } - - /* Ping the chip ... the status register is pretty portable, - * unlike probing manufacturer IDs. We do expect that system - * firmware didn't write it in the past few milliseconds! - */ - sr = spi_w8r8(spi, AT25_RDSR); - if (sr < 0 || sr & AT25_SR_nRDY) { - dev_dbg(&spi->dev, "rdsr --> %d (%02x)\n", sr, sr); - err = -ENXIO; - goto fail; - } - - if (!(at25 = kzalloc(sizeof *at25, GFP_KERNEL))) { - err = -ENOMEM; - goto fail; - } - - mutex_init(&at25->lock); - at25->chip = *chip; - at25->spi = spi_dev_get(spi); - dev_set_drvdata(&spi->dev, at25); - at25->addrlen = addrlen; - - /* Export the EEPROM bytes through sysfs, since that's convenient. - * Default to root-only access to the data; EEPROMs often hold data - * that's sensitive for read and/or write, like ethernet addresses, - * security codes, board-specific manufacturing calibrations, etc. - */ - at25->bin.attr.name = "eeprom"; - at25->bin.attr.mode = S_IRUSR; - at25->bin.read = at25_bin_read; - - at25->bin.size = at25->chip.byte_len; - if (!(chip->flags & EE_READONLY)) { - at25->bin.write = at25_bin_write; - at25->bin.attr.mode |= S_IWUSR; - } - - err = sysfs_create_bin_file(&spi->dev.kobj, &at25->bin); - if (err) - goto fail; - - dev_info(&spi->dev, "%Zd %s %s eeprom%s, pagesize %u\n", - (at25->bin.size < 1024) - ? at25->bin.size - : (at25->bin.size / 1024), - (at25->bin.size < 1024) ? "Byte" : "KByte", - at25->chip.name, - (chip->flags & EE_READONLY) ? " (readonly)" : "", - at25->chip.page_size); - return 0; -fail: - dev_dbg(&spi->dev, "probe err %d\n", err); - kfree(at25); - return err; -} - -static int __devexit at25_remove(struct spi_device *spi) -{ - struct at25_data *at25; - - at25 = dev_get_drvdata(&spi->dev); - sysfs_remove_bin_file(&spi->dev.kobj, &at25->bin); - kfree(at25); - return 0; -} - -/*-------------------------------------------------------------------------*/ - -static struct spi_driver at25_driver = { - .driver = { - .name = "at25", - .owner = THIS_MODULE, - }, - .probe = at25_probe, - .remove = __devexit_p(at25_remove), -}; - -static int __init at25_init(void) -{ - return spi_register_driver(&at25_driver); -} -module_init(at25_init); - -static void __exit at25_exit(void) -{ - spi_unregister_driver(&at25_driver); -} -module_exit(at25_exit); - -MODULE_DESCRIPTION("Driver for most SPI EEPROMs"); -MODULE_AUTHOR("David Brownell"); -MODULE_LICENSE("GPL"); - -- cgit v1.2.3 From 0eb6da20681db9b5d5769d3e1aca877f4a77d8fb Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 26 Jan 2009 21:19:54 +0100 Subject: eeprom: Move 93cx6 eeprom driver to /drivers/misc/eeprom Signed-off-by: Wolfram Sang Signed-off-by: Jean Delvare --- drivers/misc/Kconfig | 8 -- drivers/misc/Makefile | 1 - drivers/misc/eeprom/Kconfig | 8 ++ drivers/misc/eeprom/Makefile | 1 + drivers/misc/eeprom/eeprom_93cx6.c | 240 +++++++++++++++++++++++++++++++++++++ drivers/misc/eeprom_93cx6.c | 240 ------------------------------------- 6 files changed, 249 insertions(+), 249 deletions(-) create mode 100644 drivers/misc/eeprom/eeprom_93cx6.c delete mode 100644 drivers/misc/eeprom_93cx6.c (limited to 'drivers') diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 6c9cd9d30087..56073199ceba 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -87,14 +87,6 @@ config PHANTOM If you choose to build module, its name will be phantom. If unsure, say N here. -config EEPROM_93CX6 - tristate "EEPROM 93CX6 support" - ---help--- - This is a driver for the EEPROM chipsets 93c46 and 93c66. - The driver supports both read as well as write commands. - - If unsure, say N. - config SGI_IOC4 tristate "SGI IOC4 Base IO support" depends on PCI diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 0ec23203c994..bc1199830554 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_TIFM_CORE) += tifm_core.o obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o obj-$(CONFIG_PHANTOM) += phantom.o obj-$(CONFIG_SGI_IOC4) += ioc4.o -obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o obj-$(CONFIG_KGDB_TESTS) += kgdbts.o obj-$(CONFIG_SGI_XP) += sgi-xp/ diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig index 5bf3c92d7162..62aae334ee68 100644 --- a/drivers/misc/eeprom/Kconfig +++ b/drivers/misc/eeprom/Kconfig @@ -48,4 +48,12 @@ config SENSORS_EEPROM This driver can also be built as a module. If so, the module will be called eeprom. +config EEPROM_93CX6 + tristate "EEPROM 93CX6 support" + help + This is a driver for the EEPROM chipsets 93c46 and 93c66. + The driver supports both read as well as write commands. + + If unsure, say N. + endmenu diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile index a4fb5cf8ffe6..3b7af6df79a7 100644 --- a/drivers/misc/eeprom/Makefile +++ b/drivers/misc/eeprom/Makefile @@ -1,3 +1,4 @@ obj-$(CONFIG_AT24) += at24.o obj-$(CONFIG_SPI_AT25) += at25.o obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o +obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o diff --git a/drivers/misc/eeprom/eeprom_93cx6.c b/drivers/misc/eeprom/eeprom_93cx6.c new file mode 100644 index 000000000000..15b1780025c8 --- /dev/null +++ b/drivers/misc/eeprom/eeprom_93cx6.c @@ -0,0 +1,240 @@ +/* + Copyright (C) 2004 - 2006 rt2x00 SourceForge Project + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: eeprom_93cx6 + Abstract: EEPROM reader routines for 93cx6 chipsets. + Supported chipsets: 93c46 & 93c66. + */ + +#include +#include +#include +#include + +MODULE_AUTHOR("http://rt2x00.serialmonkey.com"); +MODULE_VERSION("1.0"); +MODULE_DESCRIPTION("EEPROM 93cx6 chip driver"); +MODULE_LICENSE("GPL"); + +static inline void eeprom_93cx6_pulse_high(struct eeprom_93cx6 *eeprom) +{ + eeprom->reg_data_clock = 1; + eeprom->register_write(eeprom); + + /* + * Add a short delay for the pulse to work. + * According to the specifications the "maximum minimum" + * time should be 450ns. + */ + ndelay(450); +} + +static inline void eeprom_93cx6_pulse_low(struct eeprom_93cx6 *eeprom) +{ + eeprom->reg_data_clock = 0; + eeprom->register_write(eeprom); + + /* + * Add a short delay for the pulse to work. + * According to the specifications the "maximum minimum" + * time should be 450ns. + */ + ndelay(450); +} + +static void eeprom_93cx6_startup(struct eeprom_93cx6 *eeprom) +{ + /* + * Clear all flags, and enable chip select. + */ + eeprom->register_read(eeprom); + eeprom->reg_data_in = 0; + eeprom->reg_data_out = 0; + eeprom->reg_data_clock = 0; + eeprom->reg_chip_select = 1; + eeprom->register_write(eeprom); + + /* + * kick a pulse. + */ + eeprom_93cx6_pulse_high(eeprom); + eeprom_93cx6_pulse_low(eeprom); +} + +static void eeprom_93cx6_cleanup(struct eeprom_93cx6 *eeprom) +{ + /* + * Clear chip_select and data_in flags. + */ + eeprom->register_read(eeprom); + eeprom->reg_data_in = 0; + eeprom->reg_chip_select = 0; + eeprom->register_write(eeprom); + + /* + * kick a pulse. + */ + eeprom_93cx6_pulse_high(eeprom); + eeprom_93cx6_pulse_low(eeprom); +} + +static void eeprom_93cx6_write_bits(struct eeprom_93cx6 *eeprom, + const u16 data, const u16 count) +{ + unsigned int i; + + eeprom->register_read(eeprom); + + /* + * Clear data flags. + */ + eeprom->reg_data_in = 0; + eeprom->reg_data_out = 0; + + /* + * Start writing all bits. + */ + for (i = count; i > 0; i--) { + /* + * Check if this bit needs to be set. + */ + eeprom->reg_data_in = !!(data & (1 << (i - 1))); + + /* + * Write the bit to the eeprom register. + */ + eeprom->register_write(eeprom); + + /* + * Kick a pulse. + */ + eeprom_93cx6_pulse_high(eeprom); + eeprom_93cx6_pulse_low(eeprom); + } + + eeprom->reg_data_in = 0; + eeprom->register_write(eeprom); +} + +static void eeprom_93cx6_read_bits(struct eeprom_93cx6 *eeprom, + u16 *data, const u16 count) +{ + unsigned int i; + u16 buf = 0; + + eeprom->register_read(eeprom); + + /* + * Clear data flags. + */ + eeprom->reg_data_in = 0; + eeprom->reg_data_out = 0; + + /* + * Start reading all bits. + */ + for (i = count; i > 0; i--) { + eeprom_93cx6_pulse_high(eeprom); + + eeprom->register_read(eeprom); + + /* + * Clear data_in flag. + */ + eeprom->reg_data_in = 0; + + /* + * Read if the bit has been set. + */ + if (eeprom->reg_data_out) + buf |= (1 << (i - 1)); + + eeprom_93cx6_pulse_low(eeprom); + } + + *data = buf; +} + +/** + * eeprom_93cx6_read - Read multiple words from eeprom + * @eeprom: Pointer to eeprom structure + * @word: Word index from where we should start reading + * @data: target pointer where the information will have to be stored + * + * This function will read the eeprom data as host-endian word + * into the given data pointer. + */ +void eeprom_93cx6_read(struct eeprom_93cx6 *eeprom, const u8 word, + u16 *data) +{ + u16 command; + + /* + * Initialize the eeprom register + */ + eeprom_93cx6_startup(eeprom); + + /* + * Select the read opcode and the word to be read. + */ + command = (PCI_EEPROM_READ_OPCODE << eeprom->width) | word; + eeprom_93cx6_write_bits(eeprom, command, + PCI_EEPROM_WIDTH_OPCODE + eeprom->width); + + /* + * Read the requested 16 bits. + */ + eeprom_93cx6_read_bits(eeprom, data, 16); + + /* + * Cleanup eeprom register. + */ + eeprom_93cx6_cleanup(eeprom); +} +EXPORT_SYMBOL_GPL(eeprom_93cx6_read); + +/** + * eeprom_93cx6_multiread - Read multiple words from eeprom + * @eeprom: Pointer to eeprom structure + * @word: Word index from where we should start reading + * @data: target pointer where the information will have to be stored + * @words: Number of words that should be read. + * + * This function will read all requested words from the eeprom, + * this is done by calling eeprom_93cx6_read() multiple times. + * But with the additional change that while the eeprom_93cx6_read + * will return host ordered bytes, this method will return little + * endian words. + */ +void eeprom_93cx6_multiread(struct eeprom_93cx6 *eeprom, const u8 word, + __le16 *data, const u16 words) +{ + unsigned int i; + u16 tmp; + + for (i = 0; i < words; i++) { + tmp = 0; + eeprom_93cx6_read(eeprom, word + i, &tmp); + data[i] = cpu_to_le16(tmp); + } +} +EXPORT_SYMBOL_GPL(eeprom_93cx6_multiread); + diff --git a/drivers/misc/eeprom_93cx6.c b/drivers/misc/eeprom_93cx6.c deleted file mode 100644 index 15b1780025c8..000000000000 --- a/drivers/misc/eeprom_93cx6.c +++ /dev/null @@ -1,240 +0,0 @@ -/* - Copyright (C) 2004 - 2006 rt2x00 SourceForge Project - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: eeprom_93cx6 - Abstract: EEPROM reader routines for 93cx6 chipsets. - Supported chipsets: 93c46 & 93c66. - */ - -#include -#include -#include -#include - -MODULE_AUTHOR("http://rt2x00.serialmonkey.com"); -MODULE_VERSION("1.0"); -MODULE_DESCRIPTION("EEPROM 93cx6 chip driver"); -MODULE_LICENSE("GPL"); - -static inline void eeprom_93cx6_pulse_high(struct eeprom_93cx6 *eeprom) -{ - eeprom->reg_data_clock = 1; - eeprom->register_write(eeprom); - - /* - * Add a short delay for the pulse to work. - * According to the specifications the "maximum minimum" - * time should be 450ns. - */ - ndelay(450); -} - -static inline void eeprom_93cx6_pulse_low(struct eeprom_93cx6 *eeprom) -{ - eeprom->reg_data_clock = 0; - eeprom->register_write(eeprom); - - /* - * Add a short delay for the pulse to work. - * According to the specifications the "maximum minimum" - * time should be 450ns. - */ - ndelay(450); -} - -static void eeprom_93cx6_startup(struct eeprom_93cx6 *eeprom) -{ - /* - * Clear all flags, and enable chip select. - */ - eeprom->register_read(eeprom); - eeprom->reg_data_in = 0; - eeprom->reg_data_out = 0; - eeprom->reg_data_clock = 0; - eeprom->reg_chip_select = 1; - eeprom->register_write(eeprom); - - /* - * kick a pulse. - */ - eeprom_93cx6_pulse_high(eeprom); - eeprom_93cx6_pulse_low(eeprom); -} - -static void eeprom_93cx6_cleanup(struct eeprom_93cx6 *eeprom) -{ - /* - * Clear chip_select and data_in flags. - */ - eeprom->register_read(eeprom); - eeprom->reg_data_in = 0; - eeprom->reg_chip_select = 0; - eeprom->register_write(eeprom); - - /* - * kick a pulse. - */ - eeprom_93cx6_pulse_high(eeprom); - eeprom_93cx6_pulse_low(eeprom); -} - -static void eeprom_93cx6_write_bits(struct eeprom_93cx6 *eeprom, - const u16 data, const u16 count) -{ - unsigned int i; - - eeprom->register_read(eeprom); - - /* - * Clear data flags. - */ - eeprom->reg_data_in = 0; - eeprom->reg_data_out = 0; - - /* - * Start writing all bits. - */ - for (i = count; i > 0; i--) { - /* - * Check if this bit needs to be set. - */ - eeprom->reg_data_in = !!(data & (1 << (i - 1))); - - /* - * Write the bit to the eeprom register. - */ - eeprom->register_write(eeprom); - - /* - * Kick a pulse. - */ - eeprom_93cx6_pulse_high(eeprom); - eeprom_93cx6_pulse_low(eeprom); - } - - eeprom->reg_data_in = 0; - eeprom->register_write(eeprom); -} - -static void eeprom_93cx6_read_bits(struct eeprom_93cx6 *eeprom, - u16 *data, const u16 count) -{ - unsigned int i; - u16 buf = 0; - - eeprom->register_read(eeprom); - - /* - * Clear data flags. - */ - eeprom->reg_data_in = 0; - eeprom->reg_data_out = 0; - - /* - * Start reading all bits. - */ - for (i = count; i > 0; i--) { - eeprom_93cx6_pulse_high(eeprom); - - eeprom->register_read(eeprom); - - /* - * Clear data_in flag. - */ - eeprom->reg_data_in = 0; - - /* - * Read if the bit has been set. - */ - if (eeprom->reg_data_out) - buf |= (1 << (i - 1)); - - eeprom_93cx6_pulse_low(eeprom); - } - - *data = buf; -} - -/** - * eeprom_93cx6_read - Read multiple words from eeprom - * @eeprom: Pointer to eeprom structure - * @word: Word index from where we should start reading - * @data: target pointer where the information will have to be stored - * - * This function will read the eeprom data as host-endian word - * into the given data pointer. - */ -void eeprom_93cx6_read(struct eeprom_93cx6 *eeprom, const u8 word, - u16 *data) -{ - u16 command; - - /* - * Initialize the eeprom register - */ - eeprom_93cx6_startup(eeprom); - - /* - * Select the read opcode and the word to be read. - */ - command = (PCI_EEPROM_READ_OPCODE << eeprom->width) | word; - eeprom_93cx6_write_bits(eeprom, command, - PCI_EEPROM_WIDTH_OPCODE + eeprom->width); - - /* - * Read the requested 16 bits. - */ - eeprom_93cx6_read_bits(eeprom, data, 16); - - /* - * Cleanup eeprom register. - */ - eeprom_93cx6_cleanup(eeprom); -} -EXPORT_SYMBOL_GPL(eeprom_93cx6_read); - -/** - * eeprom_93cx6_multiread - Read multiple words from eeprom - * @eeprom: Pointer to eeprom structure - * @word: Word index from where we should start reading - * @data: target pointer where the information will have to be stored - * @words: Number of words that should be read. - * - * This function will read all requested words from the eeprom, - * this is done by calling eeprom_93cx6_read() multiple times. - * But with the additional change that while the eeprom_93cx6_read - * will return host ordered bytes, this method will return little - * endian words. - */ -void eeprom_93cx6_multiread(struct eeprom_93cx6 *eeprom, const u8 word, - __le16 *data, const u16 words) -{ - unsigned int i; - u16 tmp; - - for (i = 0; i < words; i++) { - tmp = 0; - eeprom_93cx6_read(eeprom, word + i, &tmp); - data[i] = cpu_to_le16(tmp); - } -} -EXPORT_SYMBOL_GPL(eeprom_93cx6_multiread); - -- cgit v1.2.3 From dd7f8dbe2b3c0611ba969cd867c10cb63d163e25 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 26 Jan 2009 21:19:57 +0100 Subject: eeprom: More consistent symbol names Now that all EEPROM drivers live in the same place, let's harmonize their symbol names. Also fix eeprom's dependencies, it definitely needs sysfs, and is no longer experimental after many years in the kernel tree. Signed-off-by: Jean Delvare Acked-by: Wolfram Sang Cc: David Brownell --- arch/arm/configs/afeb9260_defconfig | 6 +++--- arch/arm/configs/ams_delta_defconfig | 2 +- arch/arm/configs/at91cap9adk_defconfig | 4 ++-- arch/arm/configs/at91rm9200dk_defconfig | 2 +- arch/arm/configs/at91rm9200ek_defconfig | 2 +- arch/arm/configs/at91sam9260ek_defconfig | 2 +- arch/arm/configs/at91sam9261ek_defconfig | 4 ++-- arch/arm/configs/at91sam9263ek_defconfig | 4 ++-- arch/arm/configs/at91sam9g20ek_defconfig | 2 +- arch/arm/configs/at91sam9rlek_defconfig | 4 ++-- arch/arm/configs/ateb9200_defconfig | 2 +- arch/arm/configs/badge4_defconfig | 2 +- arch/arm/configs/cam60_defconfig | 4 ++-- arch/arm/configs/cm_x300_defconfig | 4 ++-- arch/arm/configs/colibri_defconfig | 2 +- arch/arm/configs/corgi_defconfig | 6 +++--- arch/arm/configs/csb337_defconfig | 2 +- arch/arm/configs/csb637_defconfig | 2 +- arch/arm/configs/ecbat91_defconfig | 4 ++-- arch/arm/configs/ep93xx_defconfig | 2 +- arch/arm/configs/ezx_defconfig | 4 ++-- arch/arm/configs/footbridge_defconfig | 2 +- arch/arm/configs/iop13xx_defconfig | 2 +- arch/arm/configs/iop32x_defconfig | 2 +- arch/arm/configs/iop33x_defconfig | 2 +- arch/arm/configs/ixp2000_defconfig | 2 +- arch/arm/configs/ixp23xx_defconfig | 2 +- arch/arm/configs/ixp4xx_defconfig | 2 +- arch/arm/configs/kafa_defconfig | 2 +- arch/arm/configs/kirkwood_defconfig | 6 +++--- arch/arm/configs/loki_defconfig | 4 ++-- arch/arm/configs/magician_defconfig | 2 +- arch/arm/configs/msm_defconfig | 2 +- arch/arm/configs/mv78xx0_defconfig | 2 +- arch/arm/configs/n770_defconfig | 4 ++-- arch/arm/configs/neocore926_defconfig | 6 +++--- arch/arm/configs/neponset_defconfig | 2 +- arch/arm/configs/omap3_beagle_defconfig | 4 ++-- arch/arm/configs/omap3_pandora_defconfig | 6 +++--- arch/arm/configs/omap_2430sdp_defconfig | 4 ++-- arch/arm/configs/omap_apollon_2420_defconfig | 2 +- arch/arm/configs/omap_generic_1510_defconfig | 2 +- arch/arm/configs/omap_generic_1610_defconfig | 2 +- arch/arm/configs/omap_h2_1610_defconfig | 4 ++-- arch/arm/configs/omap_h4_2420_defconfig | 2 +- arch/arm/configs/omap_innovator_1510_defconfig | 2 +- arch/arm/configs/omap_ldp_defconfig | 6 +++--- arch/arm/configs/omap_osk_5912_defconfig | 2 +- arch/arm/configs/onearm_defconfig | 2 +- arch/arm/configs/orion5x_defconfig | 4 ++-- arch/arm/configs/overo_defconfig | 6 +++--- arch/arm/configs/palmz71_defconfig | 2 +- arch/arm/configs/palmz72_defconfig | 6 +++--- arch/arm/configs/pcm027_defconfig | 2 +- arch/arm/configs/pcm038_defconfig | 4 ++-- arch/arm/configs/picotux200_defconfig | 2 +- arch/arm/configs/pnx4008_defconfig | 2 +- arch/arm/configs/qil-a9260_defconfig | 4 ++-- arch/arm/configs/rpc_defconfig | 2 +- arch/arm/configs/s3c2410_defconfig | 4 ++-- arch/arm/configs/s3c6400_defconfig | 4 ++-- arch/arm/configs/spitz_defconfig | 6 +++--- arch/arm/configs/sx1_defconfig | 2 +- arch/arm/configs/trizeps4_defconfig | 2 +- arch/arm/configs/usb-a9260_defconfig | 2 +- arch/arm/configs/usb-a9263_defconfig | 2 +- arch/arm/configs/versatile_defconfig | 2 +- arch/arm/configs/viper_defconfig | 4 ++-- arch/arm/configs/xm_x2xx_defconfig | 4 ++-- arch/arm/configs/yl9200_defconfig | 2 +- arch/avr32/configs/atngw100_defconfig | 6 +++--- arch/avr32/configs/atngw100_evklcd100_defconfig | 4 ++-- arch/avr32/configs/atngw100_evklcd101_defconfig | 4 ++-- arch/avr32/configs/atstk1002_defconfig | 6 +++--- arch/avr32/configs/atstk1003_defconfig | 6 +++--- arch/avr32/configs/atstk1004_defconfig | 2 +- arch/avr32/configs/atstk1006_defconfig | 6 +++--- arch/avr32/configs/favr-32_defconfig | 6 +++--- arch/avr32/configs/hammerhead_defconfig | 6 +++--- arch/avr32/configs/mimc200_defconfig | 6 +++--- arch/blackfin/configs/BF518F-EZBRD_defconfig | 4 ++-- arch/blackfin/configs/BF526-EZBRD_defconfig | 6 +++--- arch/blackfin/configs/BF527-EZKIT_defconfig | 6 +++--- arch/blackfin/configs/BF533-EZKIT_defconfig | 2 +- arch/blackfin/configs/BF533-STAMP_defconfig | 6 +++--- arch/blackfin/configs/BF537-STAMP_defconfig | 6 +++--- arch/blackfin/configs/BF538-EZKIT_defconfig | 6 +++--- arch/blackfin/configs/BF548-EZKIT_defconfig | 6 +++--- arch/blackfin/configs/BF561-EZKIT_defconfig | 2 +- arch/blackfin/configs/BlackStamp_defconfig | 4 ++-- arch/blackfin/configs/CM-BF527_defconfig | 4 ++-- arch/blackfin/configs/CM-BF548_defconfig | 4 ++-- arch/blackfin/configs/H8606_defconfig | 2 +- arch/blackfin/configs/IP0X_defconfig | 2 +- arch/blackfin/configs/PNAV-10_defconfig | 6 +++--- arch/blackfin/configs/SRV1_defconfig | 4 ++-- arch/blackfin/configs/TCM-BF537_defconfig | 2 +- arch/ia64/configs/bigsur_defconfig | 2 +- arch/ia64/configs/zx1_defconfig | 2 +- arch/m32r/configs/m32104ut_defconfig | 2 +- arch/mips/configs/bigsur_defconfig | 2 +- arch/mips/configs/emma2rh_defconfig | 2 +- arch/mips/configs/fulong_defconfig | 4 ++-- arch/mips/configs/msp71xx_defconfig | 2 +- arch/mips/configs/mtx1_defconfig | 4 ++-- arch/mips/configs/pnx8335-stb225_defconfig | 4 ++-- arch/mips/configs/rbtx49xx_defconfig | 2 +- arch/powerpc/configs/44x/sam440ep_defconfig | 4 ++-- arch/powerpc/configs/44x/warp_defconfig | 4 ++-- arch/powerpc/configs/52xx/cm5200_defconfig | 4 ++-- arch/powerpc/configs/52xx/lite5200b_defconfig | 4 ++-- arch/powerpc/configs/52xx/motionpro_defconfig | 4 ++-- arch/powerpc/configs/52xx/pcm030_defconfig | 4 ++-- arch/powerpc/configs/52xx/tqm5200_defconfig | 4 ++-- arch/powerpc/configs/83xx/asp8347_defconfig | 4 ++-- arch/powerpc/configs/83xx/mpc8313_rdb_defconfig | 6 +++--- arch/powerpc/configs/83xx/mpc8315_rdb_defconfig | 6 +++--- arch/powerpc/configs/83xx/mpc832x_mds_defconfig | 4 ++-- arch/powerpc/configs/83xx/mpc832x_rdb_defconfig | 6 +++--- arch/powerpc/configs/83xx/mpc834x_itx_defconfig | 6 +++--- arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig | 6 +++--- arch/powerpc/configs/83xx/mpc834x_mds_defconfig | 4 ++-- arch/powerpc/configs/83xx/mpc836x_mds_defconfig | 4 ++-- arch/powerpc/configs/83xx/mpc836x_rdk_defconfig | 6 +++--- arch/powerpc/configs/83xx/mpc837x_mds_defconfig | 4 ++-- arch/powerpc/configs/83xx/mpc837x_rdb_defconfig | 4 ++-- arch/powerpc/configs/83xx/sbc834x_defconfig | 4 ++-- arch/powerpc/configs/85xx/mpc8536_ds_defconfig | 4 ++-- arch/powerpc/configs/85xx/mpc8544_ds_defconfig | 4 ++-- arch/powerpc/configs/85xx/mpc8568mds_defconfig | 4 ++-- arch/powerpc/configs/85xx/mpc8572_ds_defconfig | 4 ++-- arch/powerpc/configs/85xx/stx_gp3_defconfig | 4 ++-- arch/powerpc/configs/85xx/tqm8540_defconfig | 4 ++-- arch/powerpc/configs/85xx/tqm8541_defconfig | 4 ++-- arch/powerpc/configs/85xx/tqm8548_defconfig | 4 ++-- arch/powerpc/configs/85xx/tqm8555_defconfig | 4 ++-- arch/powerpc/configs/85xx/tqm8560_defconfig | 4 ++-- arch/powerpc/configs/86xx/gef_sbc610_defconfig | 4 ++-- arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig | 4 ++-- arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig | 4 ++-- arch/powerpc/configs/86xx/sbc8641d_defconfig | 4 ++-- arch/powerpc/configs/c2k_defconfig | 4 ++-- arch/powerpc/configs/cell_defconfig | 2 +- arch/powerpc/configs/celleb_defconfig | 2 +- arch/powerpc/configs/chrp32_defconfig | 4 ++-- arch/powerpc/configs/g5_defconfig | 4 ++-- arch/powerpc/configs/linkstation_defconfig | 4 ++-- arch/powerpc/configs/maple_defconfig | 4 ++-- arch/powerpc/configs/mpc5200_defconfig | 4 ++-- arch/powerpc/configs/mpc83xx_defconfig | 4 ++-- arch/powerpc/configs/mpc85xx_defconfig | 4 ++-- arch/powerpc/configs/mpc86xx_defconfig | 4 ++-- arch/powerpc/configs/pasemi_defconfig | 2 +- arch/powerpc/configs/pmac32_defconfig | 4 ++-- arch/powerpc/configs/ppc40x_defconfig | 4 ++-- arch/powerpc/configs/ppc44x_defconfig | 4 ++-- arch/powerpc/configs/ppc64_defconfig | 4 ++-- arch/powerpc/configs/ppc6xx_defconfig | 4 ++-- arch/powerpc/configs/prpmc2800_defconfig | 4 ++-- arch/powerpc/configs/pseries_defconfig | 4 ++-- arch/powerpc/configs/storcenter_defconfig | 4 ++-- arch/sh/configs/cayman_defconfig | 4 ++-- arch/sh/configs/edosk7760_defconfig | 4 ++-- arch/sh/configs/migor_defconfig | 4 ++-- arch/sh/configs/r7780mp_defconfig | 4 ++-- arch/sh/configs/r7785rp_defconfig | 4 ++-- arch/sh/configs/rts7751r2d1_defconfig | 2 +- arch/sh/configs/rts7751r2dplus_defconfig | 2 +- arch/sh/configs/se7343_defconfig | 4 ++-- arch/sh/configs/sh7785lcr_defconfig | 4 ++-- arch/sh/configs/shx3_defconfig | 6 +++--- arch/sparc/configs/sparc64_defconfig | 4 ++-- arch/x86/configs/i386_defconfig | 4 ++-- arch/x86/configs/x86_64_defconfig | 4 ++-- drivers/misc/eeprom/Kconfig | 8 ++++---- drivers/misc/eeprom/Makefile | 6 +++--- 176 files changed, 326 insertions(+), 326 deletions(-) (limited to 'drivers') diff --git a/arch/arm/configs/afeb9260_defconfig b/arch/arm/configs/afeb9260_defconfig index ce909586a34f..f7a272cb3da0 100644 --- a/arch/arm/configs/afeb9260_defconfig +++ b/arch/arm/configs/afeb9260_defconfig @@ -719,8 +719,8 @@ CONFIG_I2C_GPIO=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_AT24=y -# CONFIG_SENSORS_EEPROM is not set +CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -744,7 +744,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set CONFIG_SPI_SPIDEV=y # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/arm/configs/ams_delta_defconfig b/arch/arm/configs/ams_delta_defconfig index 2c4aa11f0b0d..764732529ea3 100644 --- a/arch/arm/configs/ams_delta_defconfig +++ b/arch/arm/configs/ams_delta_defconfig @@ -767,7 +767,7 @@ CONFIG_I2C_OMAP=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig index bf97801a1068..bc6bd9f6174d 100644 --- a/arch/arm/configs/at91cap9adk_defconfig +++ b/arch/arm/configs/at91cap9adk_defconfig @@ -676,7 +676,7 @@ CONFIG_I2C_CHARDEV=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -703,7 +703,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig index 868fb7b9530b..238b218394e3 100644 --- a/arch/arm/configs/at91rm9200dk_defconfig +++ b/arch/arm/configs/at91rm9200dk_defconfig @@ -636,7 +636,7 @@ CONFIG_I2C_GPIO=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig index de43fc675616..9f7a99ace514 100644 --- a/arch/arm/configs/at91rm9200ek_defconfig +++ b/arch/arm/configs/at91rm9200ek_defconfig @@ -610,7 +610,7 @@ CONFIG_I2C_GPIO=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig index 38e6a0abeb4e..e0ee7060f9aa 100644 --- a/arch/arm/configs/at91sam9260ek_defconfig +++ b/arch/arm/configs/at91sam9260ek_defconfig @@ -582,7 +582,7 @@ CONFIG_I2C_GPIO=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig index 93b779f94b41..01d1ef97d8be 100644 --- a/arch/arm/configs/at91sam9261ek_defconfig +++ b/arch/arm/configs/at91sam9261ek_defconfig @@ -660,7 +660,7 @@ CONFIG_I2C_GPIO=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -687,7 +687,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig index a7ddd94363ca..036a126725c1 100644 --- a/arch/arm/configs/at91sam9263ek_defconfig +++ b/arch/arm/configs/at91sam9263ek_defconfig @@ -670,7 +670,7 @@ CONFIG_I2C_GPIO=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -697,7 +697,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig index df0d6ee672b3..7e018a04c31b 100644 --- a/arch/arm/configs/at91sam9g20ek_defconfig +++ b/arch/arm/configs/at91sam9g20ek_defconfig @@ -665,7 +665,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set CONFIG_SPI_SPIDEV=y # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig index 811bebbdc784..237a2a6a8517 100644 --- a/arch/arm/configs/at91sam9rlek_defconfig +++ b/arch/arm/configs/at91sam9rlek_defconfig @@ -566,7 +566,7 @@ CONFIG_I2C_GPIO=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -593,7 +593,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig index 85c80f723d8e..a19e824cf7f8 100644 --- a/arch/arm/configs/ateb9200_defconfig +++ b/arch/arm/configs/ateb9200_defconfig @@ -723,7 +723,7 @@ CONFIG_I2C_GPIO=m # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig index b2bbf217c707..80222feb7dad 100644 --- a/arch/arm/configs/badge4_defconfig +++ b/arch/arm/configs/badge4_defconfig @@ -750,7 +750,7 @@ CONFIG_I2C_ELEKTOR=m # Other I2C Chip support # # CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set diff --git a/arch/arm/configs/cam60_defconfig b/arch/arm/configs/cam60_defconfig index f945105d6cd6..8448108347cf 100644 --- a/arch/arm/configs/cam60_defconfig +++ b/arch/arm/configs/cam60_defconfig @@ -722,7 +722,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -749,7 +749,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig index 46f1c9dc350c..227da0843ead 100644 --- a/arch/arm/configs/cm_x300_defconfig +++ b/arch/arm/configs/cm_x300_defconfig @@ -763,8 +763,8 @@ CONFIG_I2C_PXA=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/colibri_defconfig b/arch/arm/configs/colibri_defconfig index c3e3418ed4fe..744086fff414 100644 --- a/arch/arm/configs/colibri_defconfig +++ b/arch/arm/configs/colibri_defconfig @@ -801,7 +801,7 @@ CONFIG_I2C_CHARDEV=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index 98765438048d..d6cd165e9310 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -982,8 +982,8 @@ CONFIG_I2C_PXA=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -1008,7 +1008,7 @@ CONFIG_SPI_PXA2XX=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig index 67e65e4f0cdc..29f68c2effe6 100644 --- a/arch/arm/configs/csb337_defconfig +++ b/arch/arm/configs/csb337_defconfig @@ -679,7 +679,7 @@ CONFIG_I2C_GPIO=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig index 99702146c9fc..f7b60ceed6c7 100644 --- a/arch/arm/configs/csb637_defconfig +++ b/arch/arm/configs/csb637_defconfig @@ -704,7 +704,7 @@ CONFIG_I2C_CHARDEV=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/ecbat91_defconfig b/arch/arm/configs/ecbat91_defconfig index cfeb817ad21a..ca520733bdb0 100644 --- a/arch/arm/configs/ecbat91_defconfig +++ b/arch/arm/configs/ecbat91_defconfig @@ -721,7 +721,7 @@ CONFIG_I2C_GPIO=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -747,7 +747,7 @@ CONFIG_SPI_AT91=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig index 21aa013793c6..3f89d5f25bce 100644 --- a/arch/arm/configs/ep93xx_defconfig +++ b/arch/arm/configs/ep93xx_defconfig @@ -681,7 +681,7 @@ CONFIG_I2C_ALGOBIT=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y +CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig index 2a84d557adc2..d5ee16e6abf3 100644 --- a/arch/arm/configs/ezx_defconfig +++ b/arch/arm/configs/ezx_defconfig @@ -877,7 +877,7 @@ CONFIG_I2C_PXA=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -900,7 +900,7 @@ CONFIG_SPI_PXA2XX=m # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_HAVE_GPIO_LIB=y diff --git a/arch/arm/configs/footbridge_defconfig b/arch/arm/configs/footbridge_defconfig index 299dc22294a0..6ace512fa101 100644 --- a/arch/arm/configs/footbridge_defconfig +++ b/arch/arm/configs/footbridge_defconfig @@ -801,7 +801,7 @@ CONFIG_I2C=m # # Other I2C Chip support # -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig index 482e57061053..89c17761726b 100644 --- a/arch/arm/configs/iop13xx_defconfig +++ b/arch/arm/configs/iop13xx_defconfig @@ -744,7 +744,7 @@ CONFIG_I2C_IOP3XX=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig index 8612f58e1056..d70177b38f5f 100644 --- a/arch/arm/configs/iop32x_defconfig +++ b/arch/arm/configs/iop32x_defconfig @@ -847,7 +847,7 @@ CONFIG_I2C_IOP3XX=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig index 8b0098d19d08..eec488298267 100644 --- a/arch/arm/configs/iop33x_defconfig +++ b/arch/arm/configs/iop33x_defconfig @@ -746,7 +746,7 @@ CONFIG_I2C_IOP3XX=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/ixp2000_defconfig b/arch/arm/configs/ixp2000_defconfig index 84680db6c615..57526c15e854 100644 --- a/arch/arm/configs/ixp2000_defconfig +++ b/arch/arm/configs/ixp2000_defconfig @@ -768,7 +768,7 @@ CONFIG_I2C_IXP2000=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y +CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig index 4a2f7b2372db..ef97561ed75b 100644 --- a/arch/arm/configs/ixp23xx_defconfig +++ b/arch/arm/configs/ixp23xx_defconfig @@ -900,7 +900,7 @@ CONFIG_I2C_ALGOBIT=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y +CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig index fc14932e3abd..95cd8dfb5f1e 100644 --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig @@ -1083,7 +1083,7 @@ CONFIG_I2C_IXP4XX=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -CONFIG_SENSORS_EEPROM=y +CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig index 6dd95a2c8d5d..9f92fc527f59 100644 --- a/arch/arm/configs/kafa_defconfig +++ b/arch/arm/configs/kafa_defconfig @@ -603,7 +603,7 @@ CONFIG_I2C_GPIO=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index ab8b1e0d0dac..4bc38078d580 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -905,8 +905,8 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -930,7 +930,7 @@ CONFIG_SPI_ORION=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/arm/configs/loki_defconfig b/arch/arm/configs/loki_defconfig index 17da7c3b3d53..b720fcffbcd4 100644 --- a/arch/arm/configs/loki_defconfig +++ b/arch/arm/configs/loki_defconfig @@ -654,7 +654,7 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -675,7 +675,7 @@ CONFIG_SPI_MASTER=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index 4d11678584db..73ba62b71063 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -678,7 +678,7 @@ CONFIG_I2C_PXA=m # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig index 3b4ecf2a90dd..cc3b06ee24f9 100644 --- a/arch/arm/configs/msm_defconfig +++ b/arch/arm/configs/msm_defconfig @@ -580,7 +580,7 @@ CONFIG_I2C_MSM=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set CONFIG_SENSORS_PCA9633=y diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig index d38ebf8721a4..83c817f31bcc 100644 --- a/arch/arm/configs/mv78xx0_defconfig +++ b/arch/arm/configs/mv78xx0_defconfig @@ -832,7 +832,7 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/n770_defconfig b/arch/arm/configs/n770_defconfig index 568ef1770d5f..672f6db06a52 100644 --- a/arch/arm/configs/n770_defconfig +++ b/arch/arm/configs/n770_defconfig @@ -767,7 +767,7 @@ CONFIG_I2C_OMAP=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -798,7 +798,7 @@ CONFIG_SPI_OMAP_UWIRE=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_TSC2101 is not set # CONFIG_SPI_TSC2102 is not set # CONFIG_SPI_TSC210X is not set diff --git a/arch/arm/configs/neocore926_defconfig b/arch/arm/configs/neocore926_defconfig index 325f1e105f69..e0e4e98b5aa2 100644 --- a/arch/arm/configs/neocore926_defconfig +++ b/arch/arm/configs/neocore926_defconfig @@ -774,8 +774,8 @@ CONFIG_I2C_CHARDEV=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -798,7 +798,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig index 92ccdc6492f7..d81ea219c934 100644 --- a/arch/arm/configs/neponset_defconfig +++ b/arch/arm/configs/neponset_defconfig @@ -737,7 +737,7 @@ CONFIG_I2C_ALGOBIT=y # # Other I2C Chip support # -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig index e042d27eae16..4c6fb7e959df 100644 --- a/arch/arm/configs/omap3_beagle_defconfig +++ b/arch/arm/configs/omap3_beagle_defconfig @@ -687,8 +687,8 @@ CONFIG_I2C_OMAP=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/arm/configs/omap3_pandora_defconfig b/arch/arm/configs/omap3_pandora_defconfig index 09543f4de5bc..b54ad2e2da36 100644 --- a/arch/arm/configs/omap3_pandora_defconfig +++ b/arch/arm/configs/omap3_pandora_defconfig @@ -713,8 +713,8 @@ CONFIG_I2C_OMAP=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -740,7 +740,7 @@ CONFIG_SPI_OMAP24XX=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/arch/arm/configs/omap_2430sdp_defconfig b/arch/arm/configs/omap_2430sdp_defconfig index b0617c0da2a1..640e9afc4630 100644 --- a/arch/arm/configs/omap_2430sdp_defconfig +++ b/arch/arm/configs/omap_2430sdp_defconfig @@ -710,7 +710,7 @@ CONFIG_I2C_OMAP=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -743,7 +743,7 @@ CONFIG_SPI_MASTER=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_TSC2101 is not set # CONFIG_SPI_TSC2102 is not set # CONFIG_SPI_TSC210X is not set diff --git a/arch/arm/configs/omap_apollon_2420_defconfig b/arch/arm/configs/omap_apollon_2420_defconfig index bb39dfc72d69..ac7adf34c54a 100644 --- a/arch/arm/configs/omap_apollon_2420_defconfig +++ b/arch/arm/configs/omap_apollon_2420_defconfig @@ -612,7 +612,7 @@ CONFIG_SPI_OMAP24XX=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_TSC2101 is not set # CONFIG_SPI_TSC2102 is not set # CONFIG_SPI_TSC210X is not set diff --git a/arch/arm/configs/omap_generic_1510_defconfig b/arch/arm/configs/omap_generic_1510_defconfig index 4b1c252f2091..ccdc661b5856 100644 --- a/arch/arm/configs/omap_generic_1510_defconfig +++ b/arch/arm/configs/omap_generic_1510_defconfig @@ -637,7 +637,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/omap_generic_1610_defconfig b/arch/arm/configs/omap_generic_1610_defconfig index fc66f019d56c..0c42c8955047 100644 --- a/arch/arm/configs/omap_generic_1610_defconfig +++ b/arch/arm/configs/omap_generic_1610_defconfig @@ -641,7 +641,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig index c03507202f3c..74dbdc644d32 100644 --- a/arch/arm/configs/omap_h2_1610_defconfig +++ b/arch/arm/configs/omap_h2_1610_defconfig @@ -700,7 +700,7 @@ CONFIG_I2C_OMAP=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -731,7 +731,7 @@ CONFIG_SPI_OMAP_UWIRE=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set CONFIG_SPI_TSC2101=y # CONFIG_SPI_TSC2102 is not set # CONFIG_SPI_TSC210X is not set diff --git a/arch/arm/configs/omap_h4_2420_defconfig b/arch/arm/configs/omap_h4_2420_defconfig index 5bc89185a64f..a4aab8e4c29b 100644 --- a/arch/arm/configs/omap_h4_2420_defconfig +++ b/arch/arm/configs/omap_h4_2420_defconfig @@ -681,7 +681,7 @@ CONFIG_I2C_OMAP=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/omap_innovator_1510_defconfig b/arch/arm/configs/omap_innovator_1510_defconfig index 55b2611bd90a..0cfe363e3365 100644 --- a/arch/arm/configs/omap_innovator_1510_defconfig +++ b/arch/arm/configs/omap_innovator_1510_defconfig @@ -631,7 +631,7 @@ CONFIG_I2C_BOARDINFO=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig index b77d054169ee..aa9d34feddc6 100644 --- a/arch/arm/configs/omap_ldp_defconfig +++ b/arch/arm/configs/omap_ldp_defconfig @@ -629,8 +629,8 @@ CONFIG_I2C_OMAP=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -656,7 +656,7 @@ CONFIG_SPI_OMAP24XX=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/arch/arm/configs/omap_osk_5912_defconfig b/arch/arm/configs/omap_osk_5912_defconfig index b68e0144cab5..6b3b5c610da0 100644 --- a/arch/arm/configs/omap_osk_5912_defconfig +++ b/arch/arm/configs/omap_osk_5912_defconfig @@ -711,7 +711,7 @@ CONFIG_I2C_OMAP=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig index 418ca2febbe3..f8701fadb600 100644 --- a/arch/arm/configs/onearm_defconfig +++ b/arch/arm/configs/onearm_defconfig @@ -698,7 +698,7 @@ CONFIG_I2C_CHARDEV=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index b2456ca544c9..a8ee6984a09e 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -886,8 +886,8 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/arm/configs/overo_defconfig b/arch/arm/configs/overo_defconfig index 49200967a153..a57f9e4124fa 100644 --- a/arch/arm/configs/overo_defconfig +++ b/arch/arm/configs/overo_defconfig @@ -858,8 +858,8 @@ CONFIG_I2C_OMAP=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -CONFIG_SENSORS_EEPROM=y +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -885,7 +885,7 @@ CONFIG_SPI_OMAP24XX=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/arch/arm/configs/palmz71_defconfig b/arch/arm/configs/palmz71_defconfig index 6361922e71c1..08e14068fff7 100644 --- a/arch/arm/configs/palmz71_defconfig +++ b/arch/arm/configs/palmz71_defconfig @@ -554,7 +554,7 @@ CONFIG_SPI_OMAP_UWIRE=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_TSC2101 is not set # CONFIG_SPI_TSC2102 is not set # CONFIG_SPI_TSC210X is not set diff --git a/arch/arm/configs/palmz72_defconfig b/arch/arm/configs/palmz72_defconfig index 3245f8f33e0a..a0dc37c05dea 100644 --- a/arch/arm/configs/palmz72_defconfig +++ b/arch/arm/configs/palmz72_defconfig @@ -527,8 +527,8 @@ CONFIG_I2C_PXA=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -552,7 +552,7 @@ CONFIG_SPI_MASTER=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set CONFIG_SPI_SPIDEV=y # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig index 17b9b2469570..05ad96a43b1d 100644 --- a/arch/arm/configs/pcm027_defconfig +++ b/arch/arm/configs/pcm027_defconfig @@ -606,7 +606,7 @@ CONFIG_I2C_PXA=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -CONFIG_SENSORS_EEPROM=y +CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/pcm038_defconfig b/arch/arm/configs/pcm038_defconfig index 6b798c215ca8..41429a00f58c 100644 --- a/arch/arm/configs/pcm038_defconfig +++ b/arch/arm/configs/pcm038_defconfig @@ -604,7 +604,7 @@ CONFIG_I2C_BOARDINFO=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -626,7 +626,7 @@ CONFIG_SPI_BITBANG=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_HAVE_GPIO_LIB=y diff --git a/arch/arm/configs/picotux200_defconfig b/arch/arm/configs/picotux200_defconfig index 59e4463c2da2..9018f0f298aa 100644 --- a/arch/arm/configs/picotux200_defconfig +++ b/arch/arm/configs/picotux200_defconfig @@ -744,7 +744,7 @@ CONFIG_I2C_GPIO=m # CONFIG_SENSORS_DS1337=m CONFIG_SENSORS_DS1374=m -CONFIG_SENSORS_EEPROM=m +CONFIG_EEPROM_LEGACY=m CONFIG_SENSORS_PCF8574=m CONFIG_SENSORS_PCA9539=m CONFIG_SENSORS_PCF8591=m diff --git a/arch/arm/configs/pnx4008_defconfig b/arch/arm/configs/pnx4008_defconfig index 811b8f60d19d..67b5f1e15f4a 100644 --- a/arch/arm/configs/pnx4008_defconfig +++ b/arch/arm/configs/pnx4008_defconfig @@ -915,7 +915,7 @@ CONFIG_I2C_ALGOPCA=m # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=m +CONFIG_EEPROM_LEGACY=m CONFIG_SENSORS_PCF8574=m # CONFIG_SENSORS_PCA9539 is not set CONFIG_SENSORS_PCF8591=m diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig index 5cbd81589647..cd1d717903ac 100644 --- a/arch/arm/configs/qil-a9260_defconfig +++ b/arch/arm/configs/qil-a9260_defconfig @@ -687,7 +687,7 @@ CONFIG_I2C_CHARDEV=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -714,7 +714,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig index f62d1817d2c6..a29d61fe4c6a 100644 --- a/arch/arm/configs/rpc_defconfig +++ b/arch/arm/configs/rpc_defconfig @@ -590,7 +590,7 @@ CONFIG_I2C_ACORN=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 35faaea8623e..65a583ee5df8 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -923,7 +923,7 @@ CONFIG_I2C_SIMTEC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_SENSORS_EEPROM=m +CONFIG_EEPROM_LEGACY=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -950,7 +950,7 @@ CONFIG_SPI_S3C24XX_GPIO=m # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_HAVE_GPIO_LIB=y diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig index cf3c1b5d7048..2e8fa50e9a09 100644 --- a/arch/arm/configs/s3c6400_defconfig +++ b/arch/arm/configs/s3c6400_defconfig @@ -465,8 +465,8 @@ CONFIG_I2C_S3C2410=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_AT24=y -# CONFIG_SENSORS_EEPROM is not set +CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index 4df5b4db2aa0..745c68ffb885 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -977,8 +977,8 @@ CONFIG_I2C_PXA=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -1003,7 +1003,7 @@ CONFIG_SPI_PXA2XX=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/arch/arm/configs/sx1_defconfig b/arch/arm/configs/sx1_defconfig index 853dcdd9f2e0..25b007ff8bab 100644 --- a/arch/arm/configs/sx1_defconfig +++ b/arch/arm/configs/sx1_defconfig @@ -610,7 +610,7 @@ CONFIG_I2C_OMAP=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig index 9033d147f052..b6f838197816 100644 --- a/arch/arm/configs/trizeps4_defconfig +++ b/arch/arm/configs/trizeps4_defconfig @@ -948,7 +948,7 @@ CONFIG_I2C_PXA_SLAVE=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig index fcb4aaabd439..fd7774033d64 100644 --- a/arch/arm/configs/usb-a9260_defconfig +++ b/arch/arm/configs/usb-a9260_defconfig @@ -676,7 +676,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/arm/configs/usb-a9263_defconfig b/arch/arm/configs/usb-a9263_defconfig index b786e0407e8e..e7c19dd92557 100644 --- a/arch/arm/configs/usb-a9263_defconfig +++ b/arch/arm/configs/usb-a9263_defconfig @@ -668,7 +668,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig index 8355f88f7292..b11c5da3996c 100644 --- a/arch/arm/configs/versatile_defconfig +++ b/arch/arm/configs/versatile_defconfig @@ -611,7 +611,7 @@ CONFIG_I2C_ALGOBIT=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=m +CONFIG_EEPROM_LEGACY=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig index d01fecb8673e..30f463d2fa8a 100644 --- a/arch/arm/configs/viper_defconfig +++ b/arch/arm/configs/viper_defconfig @@ -860,8 +860,8 @@ CONFIG_I2C_PXA=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/arm/configs/xm_x2xx_defconfig b/arch/arm/configs/xm_x2xx_defconfig index f891364deceb..1039f366bf8d 100644 --- a/arch/arm/configs/xm_x2xx_defconfig +++ b/arch/arm/configs/xm_x2xx_defconfig @@ -1009,8 +1009,8 @@ CONFIG_I2C_PXA=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig index a9f41c24c9dc..9192e5977674 100644 --- a/arch/arm/configs/yl9200_defconfig +++ b/arch/arm/configs/yl9200_defconfig @@ -682,7 +682,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig index 164e2814ae78..574aca975334 100644 --- a/arch/avr32/configs/atngw100_defconfig +++ b/arch/avr32/configs/atngw100_defconfig @@ -644,8 +644,8 @@ CONFIG_I2C_GPIO=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_AT24=m -# CONFIG_SENSORS_EEPROM is not set +CONFIG_EEPROM_AT24=m +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -670,7 +670,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set CONFIG_SPI_SPIDEV=m # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/arch/avr32/configs/atngw100_evklcd100_defconfig b/arch/avr32/configs/atngw100_evklcd100_defconfig index b0572d213826..86a45b5c9d0d 100644 --- a/arch/avr32/configs/atngw100_evklcd100_defconfig +++ b/arch/avr32/configs/atngw100_evklcd100_defconfig @@ -671,7 +671,7 @@ CONFIG_I2C_GPIO=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -699,7 +699,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set CONFIG_SPI_SPIDEV=m # CONFIG_SPI_TLE62X0 is not set CONFIG_HAVE_GPIO_LIB=y diff --git a/arch/avr32/configs/atngw100_evklcd101_defconfig b/arch/avr32/configs/atngw100_evklcd101_defconfig index c5b898d21075..a96b68ea5e83 100644 --- a/arch/avr32/configs/atngw100_evklcd101_defconfig +++ b/arch/avr32/configs/atngw100_evklcd101_defconfig @@ -671,7 +671,7 @@ CONFIG_I2C_GPIO=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -699,7 +699,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set CONFIG_SPI_SPIDEV=m # CONFIG_SPI_TLE62X0 is not set CONFIG_HAVE_GPIO_LIB=y diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig index c9dc64832a19..0abe90adb1a4 100644 --- a/arch/avr32/configs/atstk1002_defconfig +++ b/arch/avr32/configs/atstk1002_defconfig @@ -663,8 +663,8 @@ CONFIG_I2C_GPIO=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_AT24=m -# CONFIG_SENSORS_EEPROM is not set +CONFIG_EEPROM_AT24=m +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -689,7 +689,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set CONFIG_SPI_SPIDEV=m # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig index 29ea1327b498..101972f40f07 100644 --- a/arch/avr32/configs/atstk1003_defconfig +++ b/arch/avr32/configs/atstk1003_defconfig @@ -611,8 +611,8 @@ CONFIG_I2C_GPIO=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_AT24=m -# CONFIG_SENSORS_EEPROM is not set +CONFIG_EEPROM_AT24=m +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -637,7 +637,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set CONFIG_SPI_SPIDEV=m # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig index 69e6c0d08ce8..518f7898df75 100644 --- a/arch/avr32/configs/atstk1004_defconfig +++ b/arch/avr32/configs/atstk1004_defconfig @@ -394,7 +394,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/arch/avr32/configs/atstk1006_defconfig b/arch/avr32/configs/atstk1006_defconfig index 361c31c2af10..c1603c4860e0 100644 --- a/arch/avr32/configs/atstk1006_defconfig +++ b/arch/avr32/configs/atstk1006_defconfig @@ -684,8 +684,8 @@ CONFIG_I2C_GPIO=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -710,7 +710,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set CONFIG_SPI_SPIDEV=m # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/arch/avr32/configs/favr-32_defconfig b/arch/avr32/configs/favr-32_defconfig index e2bd9982e2af..4c3ac0643e4a 100644 --- a/arch/avr32/configs/favr-32_defconfig +++ b/arch/avr32/configs/favr-32_defconfig @@ -633,8 +633,8 @@ CONFIG_I2C_GPIO=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -659,7 +659,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set CONFIG_SPI_SPIDEV=m # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/arch/avr32/configs/hammerhead_defconfig b/arch/avr32/configs/hammerhead_defconfig index 0d3d2982c8f5..3970fcc4d76e 100644 --- a/arch/avr32/configs/hammerhead_defconfig +++ b/arch/avr32/configs/hammerhead_defconfig @@ -716,8 +716,8 @@ CONFIG_I2C_GPIO=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -742,7 +742,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set CONFIG_SPI_SPIDEV=m # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/arch/avr32/configs/mimc200_defconfig b/arch/avr32/configs/mimc200_defconfig index 981e4f8b8aeb..1a58ffbc752d 100644 --- a/arch/avr32/configs/mimc200_defconfig +++ b/arch/avr32/configs/mimc200_defconfig @@ -565,8 +565,8 @@ CONFIG_I2C_GPIO=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_AT24=y -# CONFIG_SENSORS_EEPROM is not set +CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -592,7 +592,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -CONFIG_SPI_AT25=y +CONFIG_EEPROM_AT25=y # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig index e0b3f242b555..defb9785c65b 100644 --- a/arch/blackfin/configs/BF518F-EZBRD_defconfig +++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig @@ -746,9 +746,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set +# CONFIG_EEPROM_AT24 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig index 69f66c35b2a5..992424ff3153 100644 --- a/arch/blackfin/configs/BF526-EZBRD_defconfig +++ b/arch/blackfin/configs/BF526-EZBRD_defconfig @@ -793,9 +793,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set +# CONFIG_EEPROM_AT24 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -820,7 +820,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index f92668af00b0..21e3c1af55ba 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -837,9 +837,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set +# CONFIG_EEPROM_AT24 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -864,7 +864,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index 92afd988449b..0bdf20a1af61 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -719,7 +719,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index 49eabb41e9e5..2f747d6e97e2 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -743,9 +743,9 @@ CONFIG_I2C_HELPER_AUTO=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set +# CONFIG_EEPROM_AT24 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -770,7 +770,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index 332142f7f9b4..8b0a81294e65 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -794,9 +794,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set +# CONFIG_EEPROM_AT24 is not set CONFIG_SENSORS_AD5252=m -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -821,7 +821,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig index ed15934c67c2..a1f766bf7d9b 100644 --- a/arch/blackfin/configs/BF538-EZKIT_defconfig +++ b/arch/blackfin/configs/BF538-EZKIT_defconfig @@ -796,9 +796,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set +# CONFIG_EEPROM_AT24 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -823,7 +823,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index d4ed9ce1f62f..cd2da6b7692c 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -928,9 +928,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set +# CONFIG_EEPROM_AT24 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -955,7 +955,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index 1ecb7a38c905..b398ca202dbd 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -756,7 +756,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig index 9683b2e13097..3a20e281d23c 100644 --- a/arch/blackfin/configs/BlackStamp_defconfig +++ b/arch/blackfin/configs/BlackStamp_defconfig @@ -691,7 +691,7 @@ CONFIG_I2C_GPIO=m # # CONFIG_DS1682 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -713,7 +713,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -CONFIG_SPI_AT25=y +CONFIG_EEPROM_AT25=y CONFIG_SPI_SPIDEV=m # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig index a041e7eba770..95146948166f 100644 --- a/arch/blackfin/configs/CM-BF527_defconfig +++ b/arch/blackfin/configs/CM-BF527_defconfig @@ -715,7 +715,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -742,7 +742,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig index efd68bc78f35..efe9741b1f14 100644 --- a/arch/blackfin/configs/CM-BF548_defconfig +++ b/arch/blackfin/configs/CM-BF548_defconfig @@ -798,7 +798,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8575 is not set # CONFIG_SENSORS_PCA9543 is not set @@ -826,7 +826,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig index 5d3901d23fd1..bd553da15db8 100644 --- a/arch/blackfin/configs/H8606_defconfig +++ b/arch/blackfin/configs/H8606_defconfig @@ -750,7 +750,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -CONFIG_SPI_AT25=y +CONFIG_EEPROM_AT25=y CONFIG_SPI_SPIDEV=y # diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig index e66f5daaa828..eae83b5de92f 100644 --- a/arch/blackfin/configs/IP0X_defconfig +++ b/arch/blackfin/configs/IP0X_defconfig @@ -803,7 +803,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig index ce5dde9de9db..ad096702ac16 100644 --- a/arch/blackfin/configs/PNAV-10_defconfig +++ b/arch/blackfin/configs/PNAV-10_defconfig @@ -755,9 +755,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set +# CONFIG_EEPROM_AT24 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set CONFIG_SENSORS_PCF8574=m # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -781,7 +781,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig index 7c8250d6fa66..fa580affc9d6 100644 --- a/arch/blackfin/configs/SRV1_defconfig +++ b/arch/blackfin/configs/SRV1_defconfig @@ -798,7 +798,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8575 is not set # CONFIG_SENSORS_PCA9543 is not set @@ -826,7 +826,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -CONFIG_SPI_AT25=m +CONFIG_EEPROM_AT25=m # CONFIG_SPI_SPIDEV is not set # diff --git a/arch/blackfin/configs/TCM-BF537_defconfig b/arch/blackfin/configs/TCM-BF537_defconfig index 9af522c7dadf..97a1f1d20dcf 100644 --- a/arch/blackfin/configs/TCM-BF537_defconfig +++ b/arch/blackfin/configs/TCM-BF537_defconfig @@ -533,7 +533,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig index 6dd8655664f3..ace41096b47b 100644 --- a/arch/ia64/configs/bigsur_defconfig +++ b/arch/ia64/configs/bigsur_defconfig @@ -752,7 +752,7 @@ CONFIG_I2C_ALGOBIT=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig index 0a06b1333c95..514f0635dafe 100644 --- a/arch/ia64/configs/zx1_defconfig +++ b/arch/ia64/configs/zx1_defconfig @@ -841,7 +841,7 @@ CONFIG_I2C_ALGOPCF=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/m32r/configs/m32104ut_defconfig b/arch/m32r/configs/m32104ut_defconfig index 9b5af6cd2e0b..6f54b00b3838 100644 --- a/arch/m32r/configs/m32104ut_defconfig +++ b/arch/m32r/configs/m32104ut_defconfig @@ -621,7 +621,7 @@ CONFIG_I2C_ELEKTOR=m # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index a3bbbf067a3b..783da855a2e3 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -959,7 +959,7 @@ CONFIG_I2C_SIBYTE=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_SENSORS_EEPROM=y +CONFIG_EEPROM_LEGACY=y CONFIG_SENSORS_PCF8574=y # CONFIG_PCF8575 is not set CONFIG_SENSORS_PCF8591=y diff --git a/arch/mips/configs/emma2rh_defconfig b/arch/mips/configs/emma2rh_defconfig index 634bb4eaf132..fea9bc9865a3 100644 --- a/arch/mips/configs/emma2rh_defconfig +++ b/arch/mips/configs/emma2rh_defconfig @@ -996,7 +996,7 @@ CONFIG_I2C_CHARDEV=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/mips/configs/fulong_defconfig b/arch/mips/configs/fulong_defconfig index b6698a232ae9..786a9bc9a696 100644 --- a/arch/mips/configs/fulong_defconfig +++ b/arch/mips/configs/fulong_defconfig @@ -1006,8 +1006,8 @@ CONFIG_I2C_VIAPRO=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig index dd13db4d0fb9..84d6491b3d41 100644 --- a/arch/mips/configs/msp71xx_defconfig +++ b/arch/mips/configs/msp71xx_defconfig @@ -929,7 +929,7 @@ CONFIG_I2C_PMCMSP=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set CONFIG_PMCTWILED=y # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig index db9272677aa2..8426d3b9501c 100644 --- a/arch/mips/configs/mtx1_defconfig +++ b/arch/mips/configs/mtx1_defconfig @@ -1845,7 +1845,7 @@ CONFIG_I2C_VOODOO3=m CONFIG_SENSORS_DS1337=m CONFIG_SENSORS_DS1374=m # CONFIG_DS1682 is not set -CONFIG_SENSORS_EEPROM=m +CONFIG_EEPROM_LEGACY=m CONFIG_SENSORS_PCF8574=m CONFIG_SENSORS_PCA9539=m CONFIG_SENSORS_PCF8591=m @@ -1872,7 +1872,7 @@ CONFIG_SPI_BUTTERFLY=m # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_W1=m diff --git a/arch/mips/configs/pnx8335-stb225_defconfig b/arch/mips/configs/pnx8335-stb225_defconfig index d9536522cff5..2728caa6c2fb 100644 --- a/arch/mips/configs/pnx8335-stb225_defconfig +++ b/arch/mips/configs/pnx8335-stb225_defconfig @@ -640,8 +640,8 @@ CONFIG_I2C_CHARDEV=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig index c7c0864b8ce9..83d5c58662c8 100644 --- a/arch/mips/configs/rbtx49xx_defconfig +++ b/arch/mips/configs/rbtx49xx_defconfig @@ -522,7 +522,7 @@ CONFIG_SPI_TXX9=y # # SPI Protocol Masters # -CONFIG_SPI_AT25=y +CONFIG_EEPROM_AT25=y # CONFIG_SPI_TLE62X0 is not set CONFIG_HAVE_GPIO_LIB=y diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig index 15f48e03ec2e..ce28cd6f0d4f 100644 --- a/arch/powerpc/configs/44x/sam440ep_defconfig +++ b/arch/powerpc/configs/44x/sam440ep_defconfig @@ -730,8 +730,8 @@ CONFIG_I2C_IBM_IIC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig index 59cbd2761ed7..031ac6d4212f 100644 --- a/arch/powerpc/configs/44x/warp_defconfig +++ b/arch/powerpc/configs/44x/warp_defconfig @@ -660,8 +660,8 @@ CONFIG_I2C_HELPER_AUTO=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -CONFIG_SENSORS_EEPROM=y +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig index 3df627494b65..99c495ad9c75 100644 --- a/arch/powerpc/configs/52xx/cm5200_defconfig +++ b/arch/powerpc/configs/52xx/cm5200_defconfig @@ -629,8 +629,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig index 5b969f9c925e..9796220032fd 100644 --- a/arch/powerpc/configs/52xx/lite5200b_defconfig +++ b/arch/powerpc/configs/52xx/lite5200b_defconfig @@ -762,8 +762,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig index 3c0d4e561726..d081e0031057 100644 --- a/arch/powerpc/configs/52xx/motionpro_defconfig +++ b/arch/powerpc/configs/52xx/motionpro_defconfig @@ -629,8 +629,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -CONFIG_SENSORS_EEPROM=y +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig index 9d0207783d60..b21b8e8c3a78 100644 --- a/arch/powerpc/configs/52xx/pcm030_defconfig +++ b/arch/powerpc/configs/52xx/pcm030_defconfig @@ -740,8 +740,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -CONFIG_SENSORS_EEPROM=m +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig index bc190051e8d5..79954579f5ec 100644 --- a/arch/powerpc/configs/52xx/tqm5200_defconfig +++ b/arch/powerpc/configs/52xx/tqm5200_defconfig @@ -645,8 +645,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig index cbecaf3d7906..b3d9d1a8dfaf 100644 --- a/arch/powerpc/configs/83xx/asp8347_defconfig +++ b/arch/powerpc/configs/83xx/asp8347_defconfig @@ -732,8 +732,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig index bfc32ea265a7..6293bb99b52e 100644 --- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig @@ -858,8 +858,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -884,7 +884,7 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig index aad0e1a98c55..c7cceb4536d8 100644 --- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig @@ -919,8 +919,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -945,7 +945,7 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig index 9cb8c8b956e4..5e3cd49a2e9c 100644 --- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig @@ -730,8 +730,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig index 9cc976f010c9..90c482606880 100644 --- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig @@ -745,8 +745,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -770,7 +770,7 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig index 07a674f5344e..42b7f3403fb0 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig @@ -898,8 +898,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set CONFIG_SENSORS_PCF8574=y # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -923,7 +923,7 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig index 426232cb0097..17c903b36576 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig @@ -778,8 +778,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set CONFIG_SENSORS_PCF8574=y # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -803,7 +803,7 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig index 36e2e93a1c53..728fc95d5870 100644 --- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig @@ -673,8 +673,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig index 80eb6c9a05c4..f7546e7cb762 100644 --- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig @@ -805,8 +805,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig index b9b236806e9f..b94972f52241 100644 --- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig @@ -723,8 +723,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -749,7 +749,7 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set CONFIG_SPI_SPIDEV=y # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig index f6350d7e1688..ad97649bdc73 100644 --- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig @@ -787,8 +787,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig index f447de16f75d..2e526beeeb90 100644 --- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig @@ -789,8 +789,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig index 8d2d7eeab5f5..54bb24a5e02a 100644 --- a/arch/powerpc/configs/83xx/sbc834x_defconfig +++ b/arch/powerpc/configs/83xx/sbc834x_defconfig @@ -640,8 +640,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/85xx/mpc8536_ds_defconfig b/arch/powerpc/configs/85xx/mpc8536_ds_defconfig index e243e14a6708..256055cb6d2f 100644 --- a/arch/powerpc/configs/85xx/mpc8536_ds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8536_ds_defconfig @@ -849,8 +849,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -CONFIG_SENSORS_EEPROM=y +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig index f6cb01495ea6..5ac7e51e9f14 100644 --- a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig @@ -848,8 +848,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -CONFIG_SENSORS_EEPROM=y +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/85xx/mpc8568mds_defconfig b/arch/powerpc/configs/85xx/mpc8568mds_defconfig index 597be8491812..ab5b0b58924c 100644 --- a/arch/powerpc/configs/85xx/mpc8568mds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8568mds_defconfig @@ -723,8 +723,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig index 32aeb79216f7..65ef823e08c6 100644 --- a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig @@ -861,8 +861,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -CONFIG_SENSORS_EEPROM=y +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig index 5a0cf58d2b8c..f1288a0c3040 100644 --- a/arch/powerpc/configs/85xx/stx_gp3_defconfig +++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig @@ -877,8 +877,8 @@ CONFIG_I2C_HELPER_AUTO=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig index f3e4f3481fda..b3b1de6a6a85 100644 --- a/arch/powerpc/configs/85xx/tqm8540_defconfig +++ b/arch/powerpc/configs/85xx/tqm8540_defconfig @@ -787,8 +787,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig index c62489394535..a92a639cdf8a 100644 --- a/arch/powerpc/configs/85xx/tqm8541_defconfig +++ b/arch/powerpc/configs/85xx/tqm8541_defconfig @@ -796,8 +796,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig index eef45b97dc3e..397d37fbe7e3 100644 --- a/arch/powerpc/configs/85xx/tqm8548_defconfig +++ b/arch/powerpc/configs/85xx/tqm8548_defconfig @@ -806,8 +806,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig index 11b637e99a54..856ca6ab37b7 100644 --- a/arch/powerpc/configs/85xx/tqm8555_defconfig +++ b/arch/powerpc/configs/85xx/tqm8555_defconfig @@ -796,8 +796,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig index 2519169b6d4b..56ed4213609c 100644 --- a/arch/powerpc/configs/85xx/tqm8560_defconfig +++ b/arch/powerpc/configs/85xx/tqm8560_defconfig @@ -796,8 +796,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig index 391874c7b436..840b09a07282 100644 --- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig @@ -1081,8 +1081,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # CONFIG_DS1682=y -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig index 72854a10dfa1..25bf4e95acb8 100644 --- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig +++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig @@ -905,8 +905,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig index 41220ece603d..8e0f0e5180a4 100644 --- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig +++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig @@ -851,8 +851,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -CONFIG_SENSORS_EEPROM=y +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig index a4342862f6ef..37d9f4ed80f5 100644 --- a/arch/powerpc/configs/86xx/sbc8641d_defconfig +++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig @@ -958,8 +958,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig index 5078594cd1f5..74c6feabdd77 100644 --- a/arch/powerpc/configs/c2k_defconfig +++ b/arch/powerpc/configs/c2k_defconfig @@ -1124,8 +1124,8 @@ CONFIG_I2C_MV64XXX=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -CONFIG_SENSORS_EEPROM=m +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=m CONFIG_SENSORS_PCF8574=m # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index c420e47426f8..c6d2baa7aaeb 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -1012,7 +1012,7 @@ CONFIG_I2C_ALGOBIT=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/powerpc/configs/celleb_defconfig b/arch/powerpc/configs/celleb_defconfig index 9ba3c6fc2fef..d2123779512a 100644 --- a/arch/powerpc/configs/celleb_defconfig +++ b/arch/powerpc/configs/celleb_defconfig @@ -834,7 +834,7 @@ CONFIG_I2C_ALGOBIT=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig index 63b3c2372ce8..5094a65a4493 100644 --- a/arch/powerpc/configs/chrp32_defconfig +++ b/arch/powerpc/configs/chrp32_defconfig @@ -941,8 +941,8 @@ CONFIG_I2C_ALGOBIT=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index f85e71ccb989..fc905924c022 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -994,8 +994,8 @@ CONFIG_I2C_POWERMAC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig index 54fa62481373..3a0ffd73b65c 100644 --- a/arch/powerpc/configs/linkstation_defconfig +++ b/arch/powerpc/configs/linkstation_defconfig @@ -1015,8 +1015,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -CONFIG_SENSORS_EEPROM=m +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig index 045f1b008ce5..8b244003b9e1 100644 --- a/arch/powerpc/configs/maple_defconfig +++ b/arch/powerpc/configs/maple_defconfig @@ -866,8 +866,8 @@ CONFIG_I2C_AMD8111=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig index 15c5604d0b26..5ff3de205d6a 100644 --- a/arch/powerpc/configs/mpc5200_defconfig +++ b/arch/powerpc/configs/mpc5200_defconfig @@ -844,8 +844,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index d582014b0a38..3e1272cfdd91 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -902,8 +902,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index c87b53abc617..55e5ebd91cd0 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -860,8 +860,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -CONFIG_SENSORS_EEPROM=y +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig index 1736bbc281ec..21e0ccbd3f5c 100644 --- a/arch/powerpc/configs/mpc86xx_defconfig +++ b/arch/powerpc/configs/mpc86xx_defconfig @@ -852,8 +852,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -CONFIG_SENSORS_EEPROM=y +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig index 199e5f59d7a6..4f8681cc8d77 100644 --- a/arch/powerpc/configs/pasemi_defconfig +++ b/arch/powerpc/configs/pasemi_defconfig @@ -984,7 +984,7 @@ CONFIG_I2C_PASEMI=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_SENSORS_EEPROM=y +CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig index de9b121820a6..5339bb44cce9 100644 --- a/arch/powerpc/configs/pmac32_defconfig +++ b/arch/powerpc/configs/pmac32_defconfig @@ -1232,8 +1232,8 @@ CONFIG_I2C_POWERMAC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig index 4256e2c4534b..2d72ee7a8d60 100644 --- a/arch/powerpc/configs/ppc40x_defconfig +++ b/arch/powerpc/configs/ppc40x_defconfig @@ -745,8 +745,8 @@ CONFIG_I2C_IBM_IIC=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig index 034a1fbdc887..358b85f9270e 100644 --- a/arch/powerpc/configs/ppc44x_defconfig +++ b/arch/powerpc/configs/ppc44x_defconfig @@ -794,8 +794,8 @@ CONFIG_I2C_IBM_IIC=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index d4685d1c0be8..88c6295b76c1 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -1261,8 +1261,8 @@ CONFIG_I2C_PASEMI=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig index 01f05ec5abf3..7d044dfd9236 100644 --- a/arch/powerpc/configs/ppc6xx_defconfig +++ b/arch/powerpc/configs/ppc6xx_defconfig @@ -1801,8 +1801,8 @@ CONFIG_I2C_STUB=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_AT24=m -CONFIG_SENSORS_EEPROM=m +CONFIG_EEPROM_AT24=m +CONFIG_EEPROM_LEGACY=m CONFIG_SENSORS_PCF8574=m CONFIG_PCF8575=m CONFIG_SENSORS_PCA9539=m diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig index 6046dc0cbd82..a257da608081 100644 --- a/arch/powerpc/configs/prpmc2800_defconfig +++ b/arch/powerpc/configs/prpmc2800_defconfig @@ -943,8 +943,8 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 1e520ab65118..61b100849715 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -1055,8 +1055,8 @@ CONFIG_I2C_ALGOBIT=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig index b3f5671972a9..7eb16ab7b71b 100644 --- a/arch/powerpc/configs/storcenter_defconfig +++ b/arch/powerpc/configs/storcenter_defconfig @@ -795,8 +795,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/sh/configs/cayman_defconfig b/arch/sh/configs/cayman_defconfig index e21c0e8e22d9..92895013813d 100644 --- a/arch/sh/configs/cayman_defconfig +++ b/arch/sh/configs/cayman_defconfig @@ -700,8 +700,8 @@ CONFIG_I2C_HELPER_AUTO=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/sh/configs/edosk7760_defconfig b/arch/sh/configs/edosk7760_defconfig index 158006847ad6..e93d39621658 100644 --- a/arch/sh/configs/edosk7760_defconfig +++ b/arch/sh/configs/edosk7760_defconfig @@ -632,8 +632,8 @@ CONFIG_I2C_SH7760=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig index 30cac42f25e7..8958629d7f3d 100644 --- a/arch/sh/configs/migor_defconfig +++ b/arch/sh/configs/migor_defconfig @@ -684,8 +684,8 @@ CONFIG_I2C_SH_MOBILE=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig index 2e65149e9502..60cb1b8a8742 100644 --- a/arch/sh/configs/r7780mp_defconfig +++ b/arch/sh/configs/r7780mp_defconfig @@ -836,8 +836,8 @@ CONFIG_I2C_HIGHLANDER=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig index 043a8a509e09..de9ff781a63b 100644 --- a/arch/sh/configs/r7785rp_defconfig +++ b/arch/sh/configs/r7785rp_defconfig @@ -838,8 +838,8 @@ CONFIG_I2C_HIGHLANDER=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig index 7d2a9e88838b..5d7d7ce8a80b 100644 --- a/arch/sh/configs/rts7751r2d1_defconfig +++ b/arch/sh/configs/rts7751r2d1_defconfig @@ -777,7 +777,7 @@ CONFIG_SPI_SH_SCI=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig index f680d3eecdfb..801abeb1419d 100644 --- a/arch/sh/configs/rts7751r2dplus_defconfig +++ b/arch/sh/configs/rts7751r2dplus_defconfig @@ -777,7 +777,7 @@ CONFIG_SPI_SH_SCI=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig index be246f381507..bb87dfbda841 100644 --- a/arch/sh/configs/se7343_defconfig +++ b/arch/sh/configs/se7343_defconfig @@ -661,8 +661,8 @@ CONFIG_I2C_SH_MOBILE=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig index 07e33c285b93..45079dabf317 100644 --- a/arch/sh/configs/sh7785lcr_defconfig +++ b/arch/sh/configs/sh7785lcr_defconfig @@ -823,8 +823,8 @@ CONFIG_I2C_PCA_PLATFORM=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig index ae5cbe237fff..a687b9f02ed6 100644 --- a/arch/sh/configs/shx3_defconfig +++ b/arch/sh/configs/shx3_defconfig @@ -653,8 +653,8 @@ CONFIG_I2C_HELPER_AUTO=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -678,7 +678,7 @@ CONFIG_SPI_MASTER=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig index cde19ae78f5a..ade49941def2 100644 --- a/arch/sparc/configs/sparc64_defconfig +++ b/arch/sparc/configs/sparc64_defconfig @@ -867,8 +867,8 @@ CONFIG_I2C_ALGOBIT=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig index b30a08ed8eb4..edba00d98ac3 100644 --- a/arch/x86/configs/i386_defconfig +++ b/arch/x86/configs/i386_defconfig @@ -1331,8 +1331,8 @@ CONFIG_I2C_I801=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig index 0e7dbc0a3e46..322dd2748fc9 100644 --- a/arch/x86/configs/x86_64_defconfig +++ b/arch/x86/configs/x86_64_defconfig @@ -1311,8 +1311,8 @@ CONFIG_I2C_I801=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig index 62aae334ee68..c76df8cda5ef 100644 --- a/drivers/misc/eeprom/Kconfig +++ b/drivers/misc/eeprom/Kconfig @@ -1,6 +1,6 @@ menu "EEPROM support" -config AT24 +config EEPROM_AT24 tristate "I2C EEPROMs from most vendors" depends on I2C && SYSFS && EXPERIMENTAL help @@ -26,7 +26,7 @@ config AT24 This driver can also be built as a module. If so, the module will be called at24. -config SPI_AT25 +config EEPROM_AT25 tristate "SPI EEPROMs from most vendors" depends on SPI && SYSFS help @@ -37,9 +37,9 @@ config SPI_AT25 This driver can also be built as a module. If so, the module will be called at25. -config SENSORS_EEPROM +config EEPROM_LEGACY tristate "Old I2C EEPROM reader" - depends on I2C && EXPERIMENTAL + depends on I2C && SYSFS help If you say yes here you get read-only access to the EEPROM data available on modern memory DIMMs and Sony Vaio laptops via I2C. Such diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile index 3b7af6df79a7..539dd8f88128 100644 --- a/drivers/misc/eeprom/Makefile +++ b/drivers/misc/eeprom/Makefile @@ -1,4 +1,4 @@ -obj-$(CONFIG_AT24) += at24.o -obj-$(CONFIG_SPI_AT25) += at25.o -obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o +obj-$(CONFIG_EEPROM_AT24) += at24.o +obj-$(CONFIG_EEPROM_AT25) += at25.o +obj-$(CONFIG_EEPROM_LEGACY) += eeprom.o obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o -- cgit v1.2.3 From 26285ba35813063ade9abd2c2eaaddba9354f587 Mon Sep 17 00:00:00 2001 From: Daniele Venzano Date: Mon, 26 Jan 2009 12:24:38 -0800 Subject: isdn: Fix missing ifdef in isdn_ppp The following patch fixes a warning caused by a missing ifdef in isdn_ppp.c. A function was defined, but never used if CONFIG_IPPP_FILTER was not defined. The warning was: 'get_filter' defined but not used Patch is against 2.6.28.1 Signed-off-by: Daniele Venzano Acked-by: Karsten Keil Signed-off-by: David S. Miller --- drivers/isdn/i4l/isdn_ppp.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c index a3551dd0324d..aa30b5cb3513 100644 --- a/drivers/isdn/i4l/isdn_ppp.c +++ b/drivers/isdn/i4l/isdn_ppp.c @@ -431,6 +431,7 @@ set_arg(void __user *b, void *val,int len) return 0; } +#ifdef CONFIG_IPPP_FILTER static int get_filter(void __user *arg, struct sock_filter **p) { struct sock_fprog uprog; @@ -465,6 +466,7 @@ static int get_filter(void __user *arg, struct sock_filter **p) *p = code; return uprog.len; } +#endif /* CONFIG_IPPP_FILTER */ /* * ippp device ioctl -- cgit v1.2.3 From cdff1036492ac97b4213aeab2546914a633a7de7 Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Mon, 26 Jan 2009 12:34:57 -0800 Subject: netxen: fix vlan tso/checksum offload o set netdev->vlan_features appropriately. o fix tso descriptor initialization for vlan case. Signed-off-by: Dhananjay Phadke Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic_main.c | 31 ++++++++++++++++++++----------- 1 file changed, 20 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index d854f07ef4d3..645d384fe87e 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -735,17 +735,18 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) SET_ETHTOOL_OPS(netdev, &netxen_nic_ethtool_ops); - /* ScatterGather support */ - netdev->features = NETIF_F_SG; - netdev->features |= NETIF_F_IP_CSUM; - netdev->features |= NETIF_F_TSO; + netdev->features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO); + netdev->vlan_features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO); + if (NX_IS_REVISION_P3(revision_id)) { - netdev->features |= NETIF_F_IPV6_CSUM; - netdev->features |= NETIF_F_TSO6; + netdev->features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6); + netdev->vlan_features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6); } - if (adapter->pci_using_dac) + if (adapter->pci_using_dac) { netdev->features |= NETIF_F_HIGHDMA; + netdev->vlan_features |= NETIF_F_HIGHDMA; + } /* * Set the CRB window to invalid. If any register in window 0 is @@ -1166,6 +1167,14 @@ static bool netxen_tso_check(struct net_device *netdev, { bool tso = false; u8 opcode = TX_ETHER_PKT; + __be16 protocol = skb->protocol; + u16 flags = 0; + + if (protocol == __constant_htons(ETH_P_8021Q)) { + struct vlan_ethhdr *vh = (struct vlan_ethhdr *)skb->data; + protocol = vh->h_vlan_encapsulated_proto; + flags = FLAGS_VLAN_TAGGED; + } if ((netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) && skb_shinfo(skb)->gso_size > 0) { @@ -1174,21 +1183,21 @@ static bool netxen_tso_check(struct net_device *netdev, desc->total_hdr_length = skb_transport_offset(skb) + tcp_hdrlen(skb); - opcode = (skb->protocol == htons(ETH_P_IPV6)) ? + opcode = (protocol == __constant_htons(ETH_P_IPV6)) ? TX_TCP_LSO6 : TX_TCP_LSO; tso = true; } else if (skb->ip_summed == CHECKSUM_PARTIAL) { u8 l4proto; - if (skb->protocol == htons(ETH_P_IP)) { + if (protocol == __constant_htons(ETH_P_IP)) { l4proto = ip_hdr(skb)->protocol; if (l4proto == IPPROTO_TCP) opcode = TX_TCP_PKT; else if(l4proto == IPPROTO_UDP) opcode = TX_UDP_PKT; - } else if (skb->protocol == htons(ETH_P_IPV6)) { + } else if (protocol == __constant_htons(ETH_P_IPV6)) { l4proto = ipv6_hdr(skb)->nexthdr; if (l4proto == IPPROTO_TCP) @@ -1199,7 +1208,7 @@ static bool netxen_tso_check(struct net_device *netdev, } desc->tcp_hdr_offset = skb_transport_offset(skb); desc->ip_hdr_offset = skb_network_offset(skb); - netxen_set_tx_flags_opcode(desc, 0, opcode); + netxen_set_tx_flags_opcode(desc, flags, opcode); return tso; } -- cgit v1.2.3 From 32ec803348b4d5f1353e1d7feae30880b8b3e342 Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Mon, 26 Jan 2009 12:35:19 -0800 Subject: netxen: reduce memory footprint o reduce rx ring size from 8192 to 4096. o cut down old huge lro buffers. Signed-off-by: Dhananjay Phadke Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic.h | 12 ++++++------ drivers/net/netxen/netxen_nic_ethtool.c | 5 ++++- 2 files changed, 10 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h index c11c568fd7db..a75a31005fd3 100644 --- a/drivers/net/netxen/netxen_nic.h +++ b/drivers/net/netxen/netxen_nic.h @@ -146,7 +146,7 @@ #define MAX_RX_BUFFER_LENGTH 1760 #define MAX_RX_JUMBO_BUFFER_LENGTH 8062 -#define MAX_RX_LRO_BUFFER_LENGTH ((48*1024)-512) +#define MAX_RX_LRO_BUFFER_LENGTH (8062) #define RX_DMA_MAP_LEN (MAX_RX_BUFFER_LENGTH - 2) #define RX_JUMBO_DMA_MAP_LEN \ (MAX_RX_JUMBO_BUFFER_LENGTH - 2) @@ -207,11 +207,11 @@ #define MAX_CMD_DESCRIPTORS 4096 #define MAX_RCV_DESCRIPTORS 16384 -#define MAX_CMD_DESCRIPTORS_HOST (MAX_CMD_DESCRIPTORS / 4) -#define MAX_RCV_DESCRIPTORS_1G (MAX_RCV_DESCRIPTORS / 4) -#define MAX_RCV_DESCRIPTORS_10G 8192 -#define MAX_JUMBO_RCV_DESCRIPTORS 1024 -#define MAX_LRO_RCV_DESCRIPTORS 64 +#define MAX_CMD_DESCRIPTORS_HOST 1024 +#define MAX_RCV_DESCRIPTORS_1G 2048 +#define MAX_RCV_DESCRIPTORS_10G 4096 +#define MAX_JUMBO_RCV_DESCRIPTORS 512 +#define MAX_LRO_RCV_DESCRIPTORS 8 #define MAX_RCVSTATUS_DESCRIPTORS MAX_RCV_DESCRIPTORS #define MAX_JUMBO_RCV_DESC MAX_JUMBO_RCV_DESCRIPTORS #define MAX_RCV_DESC MAX_RCV_DESCRIPTORS diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c index c0bd40fcf708..0894a7be0225 100644 --- a/drivers/net/netxen/netxen_nic_ethtool.c +++ b/drivers/net/netxen/netxen_nic_ethtool.c @@ -561,7 +561,10 @@ netxen_nic_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ring) } ring->tx_pending = adapter->max_tx_desc_count; - ring->rx_max_pending = MAX_RCV_DESCRIPTORS; + if (adapter->ahw.board_type == NETXEN_NIC_GBE) + ring->rx_max_pending = MAX_RCV_DESCRIPTORS_1G; + else + ring->rx_max_pending = MAX_RCV_DESCRIPTORS_10G; ring->tx_max_pending = MAX_CMD_DESCRIPTORS_HOST; ring->rx_jumbo_max_pending = MAX_JUMBO_RCV_DESCRIPTORS; ring->rx_mini_max_pending = 0; -- cgit v1.2.3 From e8b5fc514d1c7637cb4b8f77e7d8ac33ef66130c Mon Sep 17 00:00:00 2001 From: Vladislav Zolotarov Date: Mon, 26 Jan 2009 12:36:42 -0800 Subject: bnx2x: tx_has_work should not wait for FW The current tx_has_work waited until all packets sent by the driver are marked as completed by the FW. This is too greedy and it causes the bnx2x_poll to spin in vain. The driver should only check that all packets FW already completed are freed - only in unload flow the driver should make sure that transmit queue is empty Signed-off-by: Vladislav Zolotarov Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 4b84f6ce5ed2..d3e7775a9ccf 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -57,8 +57,8 @@ #include "bnx2x.h" #include "bnx2x_init.h" -#define DRV_MODULE_VERSION "1.45.25" -#define DRV_MODULE_RELDATE "2009/01/22" +#define DRV_MODULE_VERSION "1.45.26" +#define DRV_MODULE_RELDATE "2009/01/26" #define BNX2X_BC_VER 0x040200 /* Time in jiffies before concluding the transmitter is hung */ @@ -740,8 +740,15 @@ static inline int bnx2x_has_tx_work(struct bnx2x_fastpath *fp) /* Tell compiler that status block fields can change */ barrier(); tx_cons_sb = le16_to_cpu(*fp->tx_cons_sb); - return ((fp->tx_pkt_prod != tx_cons_sb) || - (fp->tx_pkt_prod != fp->tx_pkt_cons)); + return (fp->tx_pkt_cons != tx_cons_sb); +} + +static inline int bnx2x_has_tx_work_unload(struct bnx2x_fastpath *fp) +{ + /* Tell compiler that consumer and producer can change */ + barrier(); + return (fp->tx_pkt_prod != fp->tx_pkt_cons); + } /* free skb in the packet ring at pos idx @@ -6729,7 +6736,7 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode) cnt = 1000; smp_rmb(); - while (bnx2x_has_tx_work(fp)) { + while (bnx2x_has_tx_work_unload(fp)) { bnx2x_tx_int(fp, 1000); if (!cnt) { -- cgit v1.2.3 From cd1f55a5b49b74e13ed9e7bc74d005803aaa0da8 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Mon, 26 Jan 2009 14:33:23 -0800 Subject: gianfar: Revive VLAN support commit 77ecaf2d5a8bfd548eed3f05c1c2e6573d5de4ba ("gianfar: Fix VLAN HW feature related frame/buffer size calculation") wrongly removed priv->vlgrp assignment, and now priv->vlgrp is always NULL. This patch fixes the issue, plus fixes following sparse warning introduced by the same commit: gianfar.c:1406:13: warning: context imbalance in 'gfar_vlan_rx_register' - wrong count at exit gfar_vlan_rx_register() checks for "if (old_grp == grp)" and tries to return w/o dropping the lock. According to net/8021q/vlan.c VLAN core issues rx_register() callback: 1. In register_vlan_dev() only on a newly created group; 2. In unregister_vlan_dev() only if the group becomes empty. Thus the check in the gianfar driver isn't needed. Signed-off-by: Anton Vorontsov Acked-by: Andy Fleming Signed-off-by: David S. Miller --- drivers/net/gianfar.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index ea530673236e..3f7eab42aef1 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -1423,15 +1423,11 @@ static void gfar_vlan_rx_register(struct net_device *dev, { struct gfar_private *priv = netdev_priv(dev); unsigned long flags; - struct vlan_group *old_grp; u32 tempval; spin_lock_irqsave(&priv->rxlock, flags); - old_grp = priv->vlgrp; - - if (old_grp == grp) - return; + priv->vlgrp = grp; if (grp) { /* Enable VLAN tag insertion */ -- cgit v1.2.3