From 45c67f6fecd28abdfeca5e6c58d7f5b7278c6362 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 11 Oct 2013 23:30:58 +0200 Subject: ath9k: move channel change code to ath_set_channel Preparation for adding the scanning state machine to ath9k Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 150 ++++++++++++++++++---------------- 1 file changed, 78 insertions(+), 72 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index ecbeccdb60bc..c01831b462a0 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -302,17 +302,91 @@ out: * by reseting the chip. To accomplish this we must first cleanup any pending * DMA, then restart stuff. */ -static int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw, - struct ath9k_channel *hchan) +static int ath_set_channel(struct ath_softc *sc, struct cfg80211_chan_def *chandef) { + struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(ah); + struct ieee80211_hw *hw = sc->hw; + struct ath9k_channel *hchan; + struct ieee80211_channel *chan = chandef->chan; + unsigned long flags; + bool offchannel; + int pos = chan->hw_value; + int old_pos = -1; int r; if (test_bit(SC_OP_INVALID, &sc->sc_flags)) return -EIO; + offchannel = !!(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL); + + if (ah->curchan) + old_pos = ah->curchan - &ah->channels[0]; + + ath_dbg(common, CONFIG, "Set channel: %d MHz width: %d\n", + chan->center_freq, chandef->width); + + /* update survey stats for the old channel before switching */ + spin_lock_irqsave(&common->cc_lock, flags); + ath_update_survey_stats(sc); + spin_unlock_irqrestore(&common->cc_lock, flags); + + ath9k_cmn_get_channel(hw, ah, chandef); + + /* + * If the operating channel changes, change the survey in-use flags + * along with it. + * Reset the survey data for the new channel, unless we're switching + * back to the operating channel from an off-channel operation. + */ + if (!offchannel && sc->cur_survey != &sc->survey[pos]) { + if (sc->cur_survey) + sc->cur_survey->filled &= ~SURVEY_INFO_IN_USE; + + sc->cur_survey = &sc->survey[pos]; + + memset(sc->cur_survey, 0, sizeof(struct survey_info)); + sc->cur_survey->filled |= SURVEY_INFO_IN_USE; + } else if (!(sc->survey[pos].filled & SURVEY_INFO_IN_USE)) { + memset(&sc->survey[pos], 0, sizeof(struct survey_info)); + } + + hchan = &sc->sc_ah->channels[pos]; r = ath_reset_internal(sc, hchan); + if (r) + return r; - return r; + /* + * The most recent snapshot of channel->noisefloor for the old + * channel is only available after the hardware reset. Copy it to + * the survey stats now. + */ + if (old_pos >= 0) + ath_update_survey_nf(sc, old_pos); + + /* + * Enable radar pulse detection if on a DFS channel. Spectral + * scanning and radar detection can not be used concurrently. + */ + if (hw->conf.radar_enabled) { + u32 rxfilter; + + /* set HW specific DFS configuration */ + ath9k_hw_set_radar_params(ah); + rxfilter = ath9k_hw_getrxfilter(ah); + rxfilter |= ATH9K_RX_FILTER_PHYRADAR | + ATH9K_RX_FILTER_PHYERR; + ath9k_hw_setrxfilter(ah, rxfilter); + ath_dbg(common, DFS, "DFS enabled at freq %d\n", + chan->center_freq); + } else { + /* perform spectral scan if requested. */ + if (test_bit(SC_OP_SCANNING, &sc->sc_flags) && + sc->spectral_mode == SPECTRAL_CHANSCAN) + ath9k_spectral_scan_trigger(hw); + } + + return 0; } static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta, @@ -1208,80 +1282,12 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) } if ((changed & IEEE80211_CONF_CHANGE_CHANNEL) || reset_channel) { - struct ieee80211_channel *curchan = hw->conf.chandef.chan; - int pos = curchan->hw_value; - int old_pos = -1; - unsigned long flags; - - if (ah->curchan) - old_pos = ah->curchan - &ah->channels[0]; - - ath_dbg(common, CONFIG, "Set channel: %d MHz width: %d\n", - curchan->center_freq, hw->conf.chandef.width); - - /* update survey stats for the old channel before switching */ - spin_lock_irqsave(&common->cc_lock, flags); - ath_update_survey_stats(sc); - spin_unlock_irqrestore(&common->cc_lock, flags); - - ath9k_cmn_get_channel(hw, ah, &conf->chandef); - - /* - * If the operating channel changes, change the survey in-use flags - * along with it. - * Reset the survey data for the new channel, unless we're switching - * back to the operating channel from an off-channel operation. - */ - if (!(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL) && - sc->cur_survey != &sc->survey[pos]) { - - if (sc->cur_survey) - sc->cur_survey->filled &= ~SURVEY_INFO_IN_USE; - - sc->cur_survey = &sc->survey[pos]; - - memset(sc->cur_survey, 0, sizeof(struct survey_info)); - sc->cur_survey->filled |= SURVEY_INFO_IN_USE; - } else if (!(sc->survey[pos].filled & SURVEY_INFO_IN_USE)) { - memset(&sc->survey[pos], 0, sizeof(struct survey_info)); - } - - if (ath_set_channel(sc, hw, &sc->sc_ah->channels[pos]) < 0) { + if (ath_set_channel(sc, &hw->conf.chandef) < 0) { ath_err(common, "Unable to set channel\n"); mutex_unlock(&sc->mutex); ath9k_ps_restore(sc); return -EINVAL; } - - /* - * The most recent snapshot of channel->noisefloor for the old - * channel is only available after the hardware reset. Copy it to - * the survey stats now. - */ - if (old_pos >= 0) - ath_update_survey_nf(sc, old_pos); - - /* - * Enable radar pulse detection if on a DFS channel. Spectral - * scanning and radar detection can not be used concurrently. - */ - if (hw->conf.radar_enabled) { - u32 rxfilter; - - /* set HW specific DFS configuration */ - ath9k_hw_set_radar_params(ah); - rxfilter = ath9k_hw_getrxfilter(ah); - rxfilter |= ATH9K_RX_FILTER_PHYRADAR | - ATH9K_RX_FILTER_PHYERR; - ath9k_hw_setrxfilter(ah, rxfilter); - ath_dbg(common, DFS, "DFS enabled at freq %d\n", - curchan->center_freq); - } else { - /* perform spectral scan if requested. */ - if (test_bit(SC_OP_SCANNING, &sc->sc_flags) && - sc->spectral_mode == SPECTRAL_CHANSCAN) - ath9k_spectral_scan_trigger(hw); - } } if (changed & IEEE80211_CONF_CHANGE_POWER) { -- cgit v1.2.3