From 48368395f670ac8cc60288674de940a38693412e Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 13 Oct 2011 11:22:39 +0300 Subject: OMAPDSS: DSI: Use new lane config in dsi_set_lane_config Use the new lane config in dsi_set_lane_config(). Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/dsi.c | 84 +++++++++++++++++++++---------------------- 1 file changed, 40 insertions(+), 44 deletions(-) (limited to 'drivers') diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index aea110c9d638..ba8d6b328a38 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -2154,59 +2154,53 @@ static int dsi_parse_lane_config(struct omap_dss_device *dssdev) return 0; } -static void dsi_set_lane_config(struct omap_dss_device *dssdev) +static int dsi_set_lane_config(struct omap_dss_device *dssdev) { struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev); + struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev); + static const u8 offsets[] = { 0, 4, 8, 12, 16 }; + static const enum dsi_lane_function functions[] = { + DSI_LANE_CLK, + DSI_LANE_DATA1, + DSI_LANE_DATA2, + DSI_LANE_DATA3, + DSI_LANE_DATA4, + }; u32 r; - int num_lanes_used = dsi_get_num_lanes_used(dssdev); - - int clk_lane = dssdev->phy.dsi.clk_lane; - int data1_lane = dssdev->phy.dsi.data1_lane; - int data2_lane = dssdev->phy.dsi.data2_lane; - int clk_pol = dssdev->phy.dsi.clk_pol; - int data1_pol = dssdev->phy.dsi.data1_pol; - int data2_pol = dssdev->phy.dsi.data2_pol; + int i; r = dsi_read_reg(dsidev, DSI_COMPLEXIO_CFG1); - r = FLD_MOD(r, clk_lane, 2, 0); - r = FLD_MOD(r, clk_pol, 3, 3); - r = FLD_MOD(r, data1_lane, 6, 4); - r = FLD_MOD(r, data1_pol, 7, 7); - r = FLD_MOD(r, data2_lane, 10, 8); - r = FLD_MOD(r, data2_pol, 11, 11); - if (num_lanes_used > 3) { - int data3_lane = dssdev->phy.dsi.data3_lane; - int data3_pol = dssdev->phy.dsi.data3_pol; - - r = FLD_MOD(r, data3_lane, 14, 12); - r = FLD_MOD(r, data3_pol, 15, 15); + + for (i = 0; i < dsi->num_lanes_used; ++i) { + unsigned offset = offsets[i]; + unsigned polarity, lane_number; + unsigned t; + + for (t = 0; t < dsi->num_lanes_supported; ++t) + if (dsi->lanes[t].function == functions[i]) + break; + + if (t == dsi->num_lanes_supported) + return -EINVAL; + + lane_number = t; + polarity = dsi->lanes[t].polarity; + + r = FLD_MOD(r, lane_number + 1, offset + 2, offset); + r = FLD_MOD(r, polarity, offset + 3, offset + 3); } - if (num_lanes_used > 4) { - int data4_lane = dssdev->phy.dsi.data4_lane; - int data4_pol = dssdev->phy.dsi.data4_pol; - r = FLD_MOD(r, data4_lane, 18, 16); - r = FLD_MOD(r, data4_pol, 19, 19); + /* clear the unused lanes */ + for (; i < dsi->num_lanes_supported; ++i) { + unsigned offset = offsets[i]; + + r = FLD_MOD(r, 0, offset + 2, offset); + r = FLD_MOD(r, 0, offset + 3, offset + 3); } - dsi_write_reg(dsidev, DSI_COMPLEXIO_CFG1, r); - /* The configuration of the DSI complex I/O (number of data lanes, - position, differential order) should not be changed while - DSS.DSI_CLK_CRTRL[20] LP_CLK_ENABLE bit is set to 1. In order for - the hardware to take into account a new configuration of the complex - I/O (done in DSS.DSI_COMPLEXIO_CFG1 register), it is recommended to - follow this sequence: First set the DSS.DSI_CTRL[0] IF_EN bit to 1, - then reset the DSS.DSI_CTRL[0] IF_EN to 0, then set - DSS.DSI_CLK_CTRL[20] LP_CLK_ENABLE to 1 and finally set again the - DSS.DSI_CTRL[0] IF_EN bit to 1. If the sequence is not followed, the - DSI complex I/O configuration is unknown. */ + dsi_write_reg(dsidev, DSI_COMPLEXIO_CFG1, r); - /* - REG_FLD_MOD(dsidev, DSI_CTRL, 1, 0, 0); - REG_FLD_MOD(dsidev, DSI_CTRL, 0, 0, 0); - REG_FLD_MOD(dsidev, DSI_CLK_CTRL, 1, 20, 20); - REG_FLD_MOD(dsidev, DSI_CTRL, 1, 0, 0); - */ + return 0; } static inline unsigned ns2ddr(struct platform_device *dsidev, unsigned ns) @@ -2473,7 +2467,9 @@ static int dsi_cio_init(struct omap_dss_device *dssdev) goto err_scp_clk_dom; } - dsi_set_lane_config(dssdev); + r = dsi_set_lane_config(dssdev); + if (r) + goto err_scp_clk_dom; /* set TX STOP MODE timer to maximum for this operation */ l = dsi_read_reg(dsidev, DSI_TIMING1); -- cgit v1.2.3