From d999e4db0ac409c582cb15e6b120241ed9105064 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 30 Apr 2013 23:22:34 +0200 Subject: NFC: mei_phy depends on INTEL_MEI INTEL_MEI_BUS_NFC never made it upstream, so make it depend on INTEL_MEI. Signed-off-by: Samuel Ortiz --- drivers/nfc/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/nfc/Kconfig b/drivers/nfc/Kconfig index 4775d4e61b88..74a852e4e41f 100644 --- a/drivers/nfc/Kconfig +++ b/drivers/nfc/Kconfig @@ -28,7 +28,7 @@ config NFC_WILINK config NFC_MEI_PHY tristate "MEI bus NFC device support" - depends on INTEL_MEI_BUS_NFC && NFC_HCI + depends on INTEL_MEI && NFC_HCI help This adds support to use an mei bus nfc device. Select this if you will use an HCI NFC driver for an NFC chip connected behind an -- cgit v1.2.3 From 73f3adb9b91efac04e4e7f8379a85400fc57121e Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 30 Apr 2013 23:48:50 +0200 Subject: NFC: mei_phy: Register event callback when enabling the device The callback registration starts a waiting read, so it needs to be fired everytime the device is enabled. Otherwise following writes will never get an answer back. Signed-off-by: Samuel Ortiz --- drivers/nfc/mei_phy.c | 9 +++++++++ drivers/nfc/microread/mei.c | 18 +++++------------- drivers/nfc/pn544/mei.c | 18 +++++------------- 3 files changed, 19 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/nfc/mei_phy.c b/drivers/nfc/mei_phy.c index b8f8abc422f0..1201bdbfb791 100644 --- a/drivers/nfc/mei_phy.c +++ b/drivers/nfc/mei_phy.c @@ -64,6 +64,15 @@ int nfc_mei_phy_enable(void *phy_id) return r; } + r = mei_cl_register_event_cb(phy->device, nfc_mei_event_cb, phy); + if (r) { + pr_err("MEY_PHY: Event cb registration failed\n"); + mei_cl_disable_device(phy->device); + phy->powered = 0; + + return r; + } + phy->powered = 1; return 0; diff --git a/drivers/nfc/microread/mei.c b/drivers/nfc/microread/mei.c index 1ad044dce7b6..51d44fb18be9 100644 --- a/drivers/nfc/microread/mei.c +++ b/drivers/nfc/microread/mei.c @@ -43,24 +43,16 @@ static int microread_mei_probe(struct mei_cl_device *device, return -ENOMEM; } - r = mei_cl_register_event_cb(device, nfc_mei_event_cb, phy); - if (r) { - pr_err(MICROREAD_DRIVER_NAME ": event cb registration failed\n"); - goto err_out; - } - r = microread_probe(phy, &mei_phy_ops, LLC_NOP_NAME, MEI_NFC_HEADER_SIZE, 0, MEI_NFC_MAX_HCI_PAYLOAD, &phy->hdev); - if (r < 0) - goto err_out; - - return 0; + if (r < 0) { + nfc_mei_phy_free(phy); -err_out: - nfc_mei_phy_free(phy); + return r; + } - return r; + return 0; } static int microread_mei_remove(struct mei_cl_device *device) diff --git a/drivers/nfc/pn544/mei.c b/drivers/nfc/pn544/mei.c index 1eb48848a35a..50cef3a574b5 100644 --- a/drivers/nfc/pn544/mei.c +++ b/drivers/nfc/pn544/mei.c @@ -43,24 +43,16 @@ static int pn544_mei_probe(struct mei_cl_device *device, return -ENOMEM; } - r = mei_cl_register_event_cb(device, nfc_mei_event_cb, phy); - if (r) { - pr_err(PN544_DRIVER_NAME ": event cb registration failed\n"); - goto err_out; - } - r = pn544_hci_probe(phy, &mei_phy_ops, LLC_NOP_NAME, MEI_NFC_HEADER_SIZE, 0, MEI_NFC_MAX_HCI_PAYLOAD, &phy->hdev); - if (r < 0) - goto err_out; - - return 0; + if (r < 0) { + nfc_mei_phy_free(phy); -err_out: - nfc_mei_phy_free(phy); + return r; + } - return r; + return 0; } static int pn544_mei_remove(struct mei_cl_device *device) -- cgit v1.2.3 From e3a6b14ceda0207c3405c6266e5177a85c0db044 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 30 Apr 2013 23:50:29 +0200 Subject: NFC: mei: Do not disable MEI devices from their remove routine Enabling and disabling device is exclusively handled by the mei_phy_ops. Signed-off-by: Samuel Ortiz --- drivers/nfc/microread/mei.c | 2 -- drivers/nfc/pn544/mei.c | 2 -- 2 files changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/nfc/microread/mei.c b/drivers/nfc/microread/mei.c index 51d44fb18be9..cdf1bc53b257 100644 --- a/drivers/nfc/microread/mei.c +++ b/drivers/nfc/microread/mei.c @@ -63,8 +63,6 @@ static int microread_mei_remove(struct mei_cl_device *device) microread_remove(phy->hdev); - nfc_mei_phy_disable(phy); - nfc_mei_phy_free(phy); return 0; diff --git a/drivers/nfc/pn544/mei.c b/drivers/nfc/pn544/mei.c index 50cef3a574b5..b5d3d18179eb 100644 --- a/drivers/nfc/pn544/mei.c +++ b/drivers/nfc/pn544/mei.c @@ -63,8 +63,6 @@ static int pn544_mei_remove(struct mei_cl_device *device) pn544_hci_remove(phy->hdev); - nfc_mei_phy_disable(phy); - nfc_mei_phy_free(phy); return 0; -- cgit v1.2.3 From 08c96abd611beadf2af414a306fe0fb02ba706ff Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 18 May 2013 21:28:15 +0200 Subject: ath9k: prevent aggregation session deadlocks Waiting for all subframes of an existing aggregation session to drain before allowing mac80211 to start a new one is fragile and deadlocks caused by this behavior have been observed. Since mac80211 has proper synchronization for aggregation session start/stop handling, a better approach to session handling is to simply allow mac80211 to start a new session at any time. This requires changing the code to discard any packets outside of the BlockAck window in the A-MPDU software retry code. This patch implements the above and also simplifies the code. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 14 +--- drivers/net/wireless/ath/ath9k/main.c | 3 +- drivers/net/wireless/ath/ath9k/rc.c | 5 +- drivers/net/wireless/ath/ath9k/xmit.c | 138 ++++++++++----------------------- 4 files changed, 46 insertions(+), 114 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 366002f266f8..42b03dc39d14 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -251,10 +251,9 @@ struct ath_atx_tid { int tidno; int baw_head; /* first un-acked tx buffer */ int baw_tail; /* next unused tx buffer slot */ - int sched; - int paused; - u8 state; - bool stop_cb; + bool sched; + bool paused; + bool active; }; struct ath_node { @@ -275,10 +274,6 @@ struct ath_node { #endif }; -#define AGGR_CLEANUP BIT(1) -#define AGGR_ADDBA_COMPLETE BIT(2) -#define AGGR_ADDBA_PROGRESS BIT(3) - struct ath_tx_control { struct ath_txq *txq; struct ath_node *an; @@ -352,8 +347,7 @@ void ath_tx_tasklet(struct ath_softc *sc); void ath_tx_edma_tasklet(struct ath_softc *sc); int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid, u16 *ssn); -bool ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid, - bool flush); +void ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid); void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid); void ath_tx_aggr_wakeup(struct ath_softc *sc, struct ath_node *an); diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 2382d1262e7f..5092ecae7706 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1709,7 +1709,8 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw, flush = true; case IEEE80211_AMPDU_TX_STOP_CONT: ath9k_ps_wakeup(sc); - if (ath_tx_aggr_stop(sc, sta, tid, flush)) + ath_tx_aggr_stop(sc, sta, tid); + if (!flush) ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); ath9k_ps_restore(sc); break; diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index aa4d368d8d3d..7eb1f4b458e4 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -1227,10 +1227,7 @@ static bool ath_tx_aggr_check(struct ath_softc *sc, struct ieee80211_sta *sta, return false; txtid = ATH_AN_2_TID(an, tidno); - - if (!(txtid->state & (AGGR_ADDBA_COMPLETE | AGGR_ADDBA_PROGRESS))) - return true; - return false; + return !txtid->active; } diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 14bb3354ea64..1c9b1bac8b0d 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -125,24 +125,6 @@ static void ath_tx_queue_tid(struct ath_txq *txq, struct ath_atx_tid *tid) list_add_tail(&ac->list, &txq->axq_acq); } -static void ath_tx_resume_tid(struct ath_softc *sc, struct ath_atx_tid *tid) -{ - struct ath_txq *txq = tid->ac->txq; - - WARN_ON(!tid->paused); - - ath_txq_lock(sc, txq); - tid->paused = false; - - if (skb_queue_empty(&tid->buf_q)) - goto unlock; - - ath_tx_queue_tid(txq, tid); - ath_txq_schedule(sc, txq); -unlock: - ath_txq_unlock_complete(sc, txq); -} - static struct ath_frame_info *get_frame_info(struct sk_buff *skb) { struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); @@ -164,20 +146,7 @@ static void ath_set_rates(struct ieee80211_vif *vif, struct ieee80211_sta *sta, ARRAY_SIZE(bf->rates)); } -static void ath_tx_clear_tid(struct ath_softc *sc, struct ath_atx_tid *tid) -{ - tid->state &= ~AGGR_ADDBA_COMPLETE; - tid->state &= ~AGGR_CLEANUP; - if (!tid->stop_cb) - return; - - ieee80211_start_tx_ba_cb_irqsafe(tid->an->vif, tid->an->sta->addr, - tid->tidno); - tid->stop_cb = false; -} - -static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid, - bool flush_packets) +static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid) { struct ath_txq *txq = tid->ac->txq; struct sk_buff *skb; @@ -194,15 +163,16 @@ static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid, while ((skb = __skb_dequeue(&tid->buf_q))) { fi = get_frame_info(skb); bf = fi->bf; - if (!bf && !flush_packets) - bf = ath_tx_setup_buffer(sc, txq, tid, skb); if (!bf) { - ieee80211_free_txskb(sc->hw, skb); - continue; + bf = ath_tx_setup_buffer(sc, txq, tid, skb); + if (!bf) { + ieee80211_free_txskb(sc->hw, skb); + continue; + } } - if (fi->retries || flush_packets) { + if (fi->retries) { list_add_tail(&bf->list, &bf_head); ath_tx_update_baw(sc, tid, bf->bf_state.seqno); ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0); @@ -213,10 +183,7 @@ static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid, } } - if (tid->baw_head == tid->baw_tail) - ath_tx_clear_tid(sc, tid); - - if (sendbar && !flush_packets) { + if (sendbar) { ath_txq_unlock(sc, txq); ath_send_bar(tid, tid->seq_start); ath_txq_lock(sc, txq); @@ -499,19 +466,19 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, tx_info = IEEE80211_SKB_CB(skb); fi = get_frame_info(skb); - if (ATH_BA_ISSET(ba, ATH_BA_INDEX(seq_st, seqno))) { + if (!BAW_WITHIN(tid->seq_start, tid->baw_size, seqno)) { + /* + * Outside of the current BlockAck window, + * maybe part of a previous session + */ + txfail = 1; + } else if (ATH_BA_ISSET(ba, ATH_BA_INDEX(seq_st, seqno))) { /* transmit completion, subframe is * acked by block ack */ acked_cnt++; } else if (!isaggr && txok) { /* transmit completion */ acked_cnt++; - } else if (tid->state & AGGR_CLEANUP) { - /* - * cleanup in progress, just fail - * the un-acked sub-frames - */ - txfail = 1; } else if (flush) { txpending = 1; } else if (fi->retries < ATH_MAX_SW_RETRIES) { @@ -535,7 +502,7 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, if (bf_next != NULL || !bf_last->bf_stale) list_move_tail(&bf->list, &bf_head); - if (!txpending || (tid->state & AGGR_CLEANUP)) { + if (!txpending) { /* * complete the acked-ones/xretried ones; update * block-ack window @@ -609,9 +576,6 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, ath_txq_lock(sc, txq); } - if (tid->state & AGGR_CLEANUP) - ath_tx_flush_tid(sc, tid, false); - rcu_read_unlock(); if (needreset) @@ -1244,9 +1208,6 @@ int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta, an = (struct ath_node *)sta->drv_priv; txtid = ATH_AN_2_TID(an, tid); - if (txtid->state & (AGGR_CLEANUP | AGGR_ADDBA_COMPLETE)) - return -EAGAIN; - /* update ampdu factor/density, they may have changed. This may happen * in HT IBSS when a beacon with HT-info is received after the station * has already been added. @@ -1258,7 +1219,7 @@ int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta, an->mpdudensity = density; } - txtid->state |= AGGR_ADDBA_PROGRESS; + txtid->active = true; txtid->paused = true; *ssn = txtid->seq_start = txtid->seq_next; txtid->bar_index = -1; @@ -1269,45 +1230,17 @@ int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta, return 0; } -bool ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid, - bool flush) +void ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid) { struct ath_node *an = (struct ath_node *)sta->drv_priv; struct ath_atx_tid *txtid = ATH_AN_2_TID(an, tid); struct ath_txq *txq = txtid->ac->txq; - bool ret = !flush; - - if (flush) - txtid->stop_cb = false; - - if (txtid->state & AGGR_CLEANUP) - return false; - - if (!(txtid->state & AGGR_ADDBA_COMPLETE)) { - txtid->state &= ~AGGR_ADDBA_PROGRESS; - return ret; - } ath_txq_lock(sc, txq); + txtid->active = false; txtid->paused = true; - - /* - * If frames are still being transmitted for this TID, they will be - * cleaned up during tx completion. To prevent race conditions, this - * TID can only be reused after all in-progress subframes have been - * completed. - */ - if (txtid->baw_head != txtid->baw_tail) { - txtid->state |= AGGR_CLEANUP; - ret = false; - txtid->stop_cb = !flush; - } else { - txtid->state &= ~AGGR_ADDBA_COMPLETE; - } - - ath_tx_flush_tid(sc, txtid, flush); + ath_tx_flush_tid(sc, txtid); ath_txq_unlock_complete(sc, txq); - return ret; } void ath_tx_aggr_sleep(struct ieee80211_sta *sta, struct ath_softc *sc, @@ -1371,18 +1304,28 @@ void ath_tx_aggr_wakeup(struct ath_softc *sc, struct ath_node *an) } } -void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid) +void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, + u16 tidno) { - struct ath_atx_tid *txtid; + struct ath_atx_tid *tid; struct ath_node *an; + struct ath_txq *txq; an = (struct ath_node *)sta->drv_priv; + tid = ATH_AN_2_TID(an, tidno); + txq = tid->ac->txq; - txtid = ATH_AN_2_TID(an, tid); - txtid->baw_size = IEEE80211_MIN_AMPDU_BUF << sta->ht_cap.ampdu_factor; - txtid->state |= AGGR_ADDBA_COMPLETE; - txtid->state &= ~AGGR_ADDBA_PROGRESS; - ath_tx_resume_tid(sc, txtid); + ath_txq_lock(sc, txq); + + tid->baw_size = IEEE80211_MIN_AMPDU_BUF << sta->ht_cap.ampdu_factor; + tid->paused = false; + + if (!skb_queue_empty(&tid->buf_q)) { + ath_tx_queue_tid(txq, tid); + ath_txq_schedule(sc, txq); + } + + ath_txq_unlock_complete(sc, txq); } /********************/ @@ -2431,13 +2374,10 @@ void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an) tid->baw_head = tid->baw_tail = 0; tid->sched = false; tid->paused = false; - tid->state &= ~AGGR_CLEANUP; + tid->active = false; __skb_queue_head_init(&tid->buf_q); acno = TID_TO_WME_AC(tidno); tid->ac = &an->ac[acno]; - tid->state &= ~AGGR_ADDBA_COMPLETE; - tid->state &= ~AGGR_ADDBA_PROGRESS; - tid->stop_cb = false; } for (acno = 0, ac = &an->ac[acno]; @@ -2474,7 +2414,7 @@ void ath_tx_node_cleanup(struct ath_softc *sc, struct ath_node *an) } ath_tid_drain(sc, txq, tid); - ath_tx_clear_tid(sc, tid); + tid->active = false; ath_txq_unlock(sc, txq); } -- cgit v1.2.3 From beaee9cac180e37bbb30d538bcea0ebbcf4fba0e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 30 Apr 2013 10:57:05 +0300 Subject: atmel: printing bogus information There was an extra ';' character added to the end of the if statement which means that it always prints that the /proc entry wasn't created even though it was. Signed-off-by: Dan Carpenter Acked-by: David Howells Signed-off-by: John W. Linville --- drivers/net/wireless/atmel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index 830bb1d1f957..b827d51c30a3 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -1624,7 +1624,7 @@ struct net_device *init_atmel_card(unsigned short irq, unsigned long port, netif_carrier_off(dev); - if (!proc_create_data("driver/atmel", 0, NULL, &atmel_proc_fops, priv)); + if (!proc_create_data("driver/atmel", 0, NULL, &atmel_proc_fops, priv)) printk(KERN_WARNING "atmel: unable to create /proc entry.\n"); printk(KERN_INFO "%s: Atmel at76c50x. Version %d.%d. MAC %pM\n", -- cgit v1.2.3 From 23dd9b2a43698df12f7951e0e5a5fbffd0b3108a Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 23 May 2013 12:20:54 +0200 Subject: ath9k_hw: fix spur mitigation issues on AR934x Do not subtract spur power from noise floor on this chip, as it can lead to packet loss and other connectivity issues. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index 2bf6548dd143..e1714d7c9eeb 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -334,7 +334,8 @@ static void ar9003_hw_spur_ofdm(struct ath_hw *ah, REG_RMW_FIELD(ah, AR_PHY_SPUR_REG, AR_PHY_SPUR_REG_EN_VIT_SPUR_RSSI, 1); - if (REG_READ_FIELD(ah, AR_PHY_MODE, + if (!AR_SREV_9340(ah) && + REG_READ_FIELD(ah, AR_PHY_MODE, AR_PHY_MODE_DYNAMIC) == 0x1) REG_RMW_FIELD(ah, AR_PHY_SPUR_REG, AR_PHY_SPUR_REG_ENABLE_NF_RSSI_SPUR_MIT, 1); -- cgit v1.2.3 From a37a99102e4573145aa60a2f78a690cc8def027c Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 23 May 2013 12:20:55 +0200 Subject: ath9k_hw: fix host interface reset on AR934x If a local bus timeout has been detected, the host interface needs to be reset to clear the errors. AR934x uses a different synchronous interrupt bit to indicate this, so the check needs to be fixed. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 10 +++++++--- drivers/net/wireless/ath/ath9k/reg.h | 2 ++ 2 files changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 7f25da8444fe..01e97ce438ba 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1306,9 +1306,13 @@ static bool ath9k_hw_set_reset(struct ath_hw *ah, int type) AR_RTC_RC_COLD_RESET | AR_RTC_RC_WARM_RESET; } else { tmpReg = REG_READ(ah, AR_INTR_SYNC_CAUSE); - if (tmpReg & - (AR_INTR_SYNC_LOCAL_TIMEOUT | - AR_INTR_SYNC_RADM_CPL_TIMEOUT)) { + if (AR_SREV_9340(ah)) + tmpReg &= AR9340_INTR_SYNC_LOCAL_TIMEOUT; + else + tmpReg &= AR_INTR_SYNC_LOCAL_TIMEOUT | + AR_INTR_SYNC_RADM_CPL_TIMEOUT; + + if (tmpReg) { u32 val; REG_WRITE(ah, AR_INTR_SYNC_ENABLE, 0); diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index 5c4ab5026dca..9c056a80b85d 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -1007,6 +1007,8 @@ enum { AR_INTR_SYNC_LOCAL_TIMEOUT | AR_INTR_SYNC_MAC_SLEEP_ACCESS), + AR9340_INTR_SYNC_LOCAL_TIMEOUT = 0x00000010, + AR_INTR_SYNC_SPURIOUS = 0xFFFFFFFF, }; -- cgit v1.2.3 From 86c157b3f83597e11d8f03a9dece98d1e77a8ce7 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 23 May 2013 12:20:56 +0200 Subject: ath9k_hw: improve performance for AR934x v1.3+ AR934x v1.3 no longer needs the DCU backoff reduction workaround for preventing rx overruns, but in turn needs the number of usable Tx buffers to be reduced slightly. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 15 ++++++++++----- drivers/net/wireless/ath/ath9k/mac.c | 2 +- drivers/net/wireless/ath/ath9k/reg.h | 9 +++++++++ 3 files changed, 20 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 01e97ce438ba..15dfefcf2d0f 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1172,6 +1172,7 @@ u32 ath9k_regd_get_ctl(struct ath_regulatory *reg, struct ath9k_channel *chan) static inline void ath9k_hw_set_dma(struct ath_hw *ah) { struct ath_common *common = ath9k_hw_common(ah); + int txbuf_size; ENABLE_REGWRITE_BUFFER(ah); @@ -1225,13 +1226,17 @@ static inline void ath9k_hw_set_dma(struct ath_hw *ah) * So set the usable tx buf size also to half to * avoid data/delimiter underruns */ - REG_WRITE(ah, AR_PCU_TXBUF_CTRL, - AR_9285_PCU_TXBUF_CTRL_USABLE_SIZE); - } else if (!AR_SREV_9271(ah)) { - REG_WRITE(ah, AR_PCU_TXBUF_CTRL, - AR_PCU_TXBUF_CTRL_USABLE_SIZE); + txbuf_size = AR_9285_PCU_TXBUF_CTRL_USABLE_SIZE; + } else if (AR_SREV_9340_13_OR_LATER(ah)) { + /* Uses fewer entries for AR934x v1.3+ to prevent rx overruns */ + txbuf_size = AR_9340_PCU_TXBUF_CTRL_USABLE_SIZE; + } else { + txbuf_size = AR_PCU_TXBUF_CTRL_USABLE_SIZE; } + if (!AR_SREV_9271(ah)) + REG_WRITE(ah, AR_PCU_TXBUF_CTRL, txbuf_size); + REGWRITE_BUFFER_FLUSH(ah); if (AR_SREV_9300_20_OR_LATER(ah)) diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c index 498fee04afa0..566109a40fb3 100644 --- a/drivers/net/wireless/ath/ath9k/mac.c +++ b/drivers/net/wireless/ath/ath9k/mac.c @@ -410,7 +410,7 @@ bool ath9k_hw_resettxqueue(struct ath_hw *ah, u32 q) REG_WRITE(ah, AR_QMISC(q), AR_Q_MISC_DCU_EARLY_TERM_REQ); - if (AR_SREV_9340(ah)) + if (AR_SREV_9340(ah) && !AR_SREV_9340_13_OR_LATER(ah)) REG_WRITE(ah, AR_DMISC(q), AR_D_MISC_CW_BKOFF_EN | AR_D_MISC_FRAG_WAIT_EN | 0x1); else diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index 9c056a80b85d..f7c90cc58d56 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -798,6 +798,10 @@ #define AR_SREV_REVISION_9485_10 0 #define AR_SREV_REVISION_9485_11 1 #define AR_SREV_VERSION_9340 0x300 +#define AR_SREV_REVISION_9340_10 0 +#define AR_SREV_REVISION_9340_11 1 +#define AR_SREV_REVISION_9340_12 2 +#define AR_SREV_REVISION_9340_13 3 #define AR_SREV_VERSION_9580 0x1C0 #define AR_SREV_REVISION_9580_10 4 /* AR9580 1.0 */ #define AR_SREV_VERSION_9462 0x280 @@ -897,6 +901,10 @@ #define AR_SREV_9340(_ah) \ (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9340)) +#define AR_SREV_9340_13_OR_LATER(_ah) \ + (AR_SREV_9340((_ah)) && \ + ((_ah)->hw_version.macRev >= AR_SREV_REVISION_9340_13)) + #define AR_SREV_9285E_20(_ah) \ (AR_SREV_9285_12_OR_LATER(_ah) && \ ((REG_READ(_ah, AR_AN_SYNTH9) & 0x7) == 0x1)) @@ -1883,6 +1891,7 @@ enum { #define AR_PCU_TXBUF_CTRL_SIZE_MASK 0x7FF #define AR_PCU_TXBUF_CTRL_USABLE_SIZE 0x700 #define AR_9285_PCU_TXBUF_CTRL_USABLE_SIZE 0x380 +#define AR_9340_PCU_TXBUF_CTRL_USABLE_SIZE 0x500 #define AR_PCU_MISC_MODE2 0x8344 #define AR_PCU_MISC_MODE2_MGMT_CRYPTO_ENABLE 0x00000002 -- cgit v1.2.3 From 4d2593cc65fa15f2a36313aa8d03a0937226ad49 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 22 May 2013 23:09:50 +0000 Subject: qlge: add missing free_netdev() on error in qlge_probe() Add the missing free_netdev() before return from function qlge_probe() in the error handling case. Signed-off-by: Wei Yongjun Acked-by: Jitendra Kalsaria Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlge/qlge_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_main.c b/drivers/net/ethernet/qlogic/qlge/qlge_main.c index 50235d201592..f87cc216045b 100644 --- a/drivers/net/ethernet/qlogic/qlge/qlge_main.c +++ b/drivers/net/ethernet/qlogic/qlge/qlge_main.c @@ -4717,6 +4717,7 @@ static int qlge_probe(struct pci_dev *pdev, dev_err(&pdev->dev, "net device registration failed.\n"); ql_release_all(pdev); pci_disable_device(pdev); + free_netdev(ndev); return err; } /* Start up the timer to trigger EEH if -- cgit v1.2.3 From 0d8c3e77e7fba8c84c871b43f35029daa92acc17 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 22 May 2013 23:59:28 +0000 Subject: ptp_pch: fix error handling in pch_probe() Fix to release resources when ptp_clock_register() fail instead of return error code directly. Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- drivers/ptp/ptp_pch.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ptp/ptp_pch.c b/drivers/ptp/ptp_pch.c index bea94510ad2d..71a2559278d7 100644 --- a/drivers/ptp/ptp_pch.c +++ b/drivers/ptp/ptp_pch.c @@ -628,9 +628,10 @@ pch_probe(struct pci_dev *pdev, const struct pci_device_id *id) chip->caps = ptp_pch_caps; chip->ptp_clock = ptp_clock_register(&chip->caps, &pdev->dev); - - if (IS_ERR(chip->ptp_clock)) - return PTR_ERR(chip->ptp_clock); + if (IS_ERR(chip->ptp_clock)) { + ret = PTR_ERR(chip->ptp_clock); + goto err_ptp_clock_reg; + } spin_lock_init(&chip->register_lock); @@ -669,6 +670,7 @@ pch_probe(struct pci_dev *pdev, const struct pci_device_id *id) err_req_irq: ptp_clock_unregister(chip->ptp_clock); +err_ptp_clock_reg: iounmap(chip->regs); chip->regs = NULL; -- cgit v1.2.3 From a87783699b23395c46bbeeb5d28f6db24897bf26 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 22 May 2013 10:48:10 +0300 Subject: iwlwifi: dvm: fix zero LQ CMD sending avoidance In 63b77bf489881747c5118476918cc8c29378ee63 iwlwifi: dvm: don't send zeroed LQ cmd I tried to avoid to send zeroed LQ cmd, but I made a (very) stupid mistake in the memcmp. Since this patch has been ported to stable, the fix should go to stable too. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=58341 Cc: stable@vger.kernel.org Reported-by: Hinnerk van Bruinehsen Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/sta.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/dvm/sta.c b/drivers/net/wireless/iwlwifi/dvm/sta.c index db183b44e038..c3c13ce96eb0 100644 --- a/drivers/net/wireless/iwlwifi/dvm/sta.c +++ b/drivers/net/wireless/iwlwifi/dvm/sta.c @@ -735,7 +735,7 @@ void iwl_restore_stations(struct iwl_priv *priv, struct iwl_rxon_context *ctx) memcpy(&lq, priv->stations[i].lq, sizeof(struct iwl_link_quality_cmd)); - if (!memcmp(&lq, &zero_lq, sizeof(lq))) + if (memcmp(&lq, &zero_lq, sizeof(lq))) send_lq = true; } spin_unlock_bh(&priv->sta_lock); -- cgit v1.2.3 From 9a9c56cb34e65000d1f0a4b7553399bfcf7c5a52 Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Sun, 26 May 2013 21:31:28 +0000 Subject: net: phy: fix a bug when verify the EEE support The phy_init_eee has to exit with an error when the local device and its link partner both do not support EEE. So this patch fixes a problem when verify this. Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index c14f14741b3f..38f0b312ff85 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -1044,7 +1044,7 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable) adv = mmd_eee_adv_to_ethtool_adv_t(eee_adv); lp = mmd_eee_adv_to_ethtool_adv_t(eee_lp); idx = phy_find_setting(phydev->speed, phydev->duplex); - if ((lp & adv & settings[idx].setting)) + if (!(lp & adv & settings[idx].setting)) goto eee_exit; if (clk_stop_enable) { -- cgit v1.2.3 From b3657453f16a7b84eab9b93bb9a9a2901ffc70af Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Mon, 27 May 2013 21:09:53 +0200 Subject: brcmfmac: Turn off ARP offloading when configured for AP. ARP offloading should only be used in STA or P2P client mode. It is currently configured once at init. When being configured for AP ARP offloading should be turned off and when AP mode is left it can be turned back on. Cc: stable@vger.kernel.org Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../net/wireless/brcm80211/brcmfmac/dhd_common.c | 18 ---------- .../net/wireless/brcm80211/brcmfmac/fwil_types.h | 6 ++++ .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 40 +++++++++++++++++++++- 3 files changed, 45 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c index be0787cab24f..9431af2465f3 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c @@ -27,7 +27,6 @@ #include "tracepoint.h" #define PKTFILTER_BUF_SIZE 128 -#define BRCMF_ARPOL_MODE 0xb /* agent|snoop|peer_autoreply */ #define BRCMF_DEFAULT_BCN_TIMEOUT 3 #define BRCMF_DEFAULT_SCAN_CHANNEL_TIME 40 #define BRCMF_DEFAULT_SCAN_UNASSOC_TIME 40 @@ -338,23 +337,6 @@ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp) goto done; } - /* Try to set and enable ARP offload feature, this may fail */ - err = brcmf_fil_iovar_int_set(ifp, "arp_ol", BRCMF_ARPOL_MODE); - if (err) { - brcmf_dbg(TRACE, "failed to set ARP offload mode to 0x%x, err = %d\n", - BRCMF_ARPOL_MODE, err); - err = 0; - } else { - err = brcmf_fil_iovar_int_set(ifp, "arpoe", 1); - if (err) { - brcmf_dbg(TRACE, "failed to enable ARP offload err = %d\n", - err); - err = 0; - } else - brcmf_dbg(TRACE, "successfully enabled ARP offload to 0x%x\n", - BRCMF_ARPOL_MODE); - } - /* Setup packet filter */ brcmf_c_pktfilter_offload_set(ifp, BRCMF_DEFAULT_PACKET_FILTER); brcmf_c_pktfilter_offload_enable(ifp, BRCMF_DEFAULT_PACKET_FILTER, diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h index 0f2c83bc95dc..665ef69e974b 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h @@ -23,6 +23,12 @@ #define BRCMF_FIL_ACTION_FRAME_SIZE 1800 +/* ARP Offload feature flags for arp_ol iovar */ +#define BRCMF_ARP_OL_AGENT 0x00000001 +#define BRCMF_ARP_OL_SNOOP 0x00000002 +#define BRCMF_ARP_OL_HOST_AUTO_REPLY 0x00000004 +#define BRCMF_ARP_OL_PEER_AUTO_REPLY 0x00000008 + enum brcmf_fil_p2p_if_types { BRCMF_FIL_P2P_IF_CLIENT, diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 761f501959a9..94285f634a48 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -459,6 +459,38 @@ send_key_to_dongle(struct net_device *ndev, struct brcmf_wsec_key *key) return err; } +static s32 +brcmf_configure_arp_offload(struct brcmf_if *ifp, bool enable) +{ + s32 err; + u32 mode; + + if (enable) + mode = BRCMF_ARP_OL_AGENT | BRCMF_ARP_OL_PEER_AUTO_REPLY; + else + mode = 0; + + /* Try to set and enable ARP offload feature, this may fail, then it */ + /* is simply not supported and err 0 will be returned */ + err = brcmf_fil_iovar_int_set(ifp, "arp_ol", mode); + if (err) { + brcmf_dbg(TRACE, "failed to set ARP offload mode to 0x%x, err = %d\n", + mode, err); + err = 0; + } else { + err = brcmf_fil_iovar_int_set(ifp, "arpoe", enable); + if (err) { + brcmf_dbg(TRACE, "failed to configure (%d) ARP offload err = %d\n", + enable, err); + err = 0; + } else + brcmf_dbg(TRACE, "successfully configured (%d) ARP offload to 0x%x\n", + enable, mode); + } + + return err; +} + static struct wireless_dev *brcmf_cfg80211_add_iface(struct wiphy *wiphy, const char *name, enum nl80211_iftype type, @@ -3683,6 +3715,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, } brcmf_set_mpc(ifp, 0); + brcmf_configure_arp_offload(ifp, false); /* find the RSN_IE */ rsn_ie = brcmf_parse_tlvs((u8 *)settings->beacon.tail, @@ -3789,8 +3822,10 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, set_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state); exit: - if (err) + if (err) { brcmf_set_mpc(ifp, 1); + brcmf_configure_arp_offload(ifp, true); + } return err; } @@ -3831,6 +3866,7 @@ static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev) brcmf_err("bss_enable config failed %d\n", err); } brcmf_set_mpc(ifp, 1); + brcmf_configure_arp_offload(ifp, true); set_bit(BRCMF_VIF_STATUS_AP_CREATING, &ifp->vif->sme_state); clear_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state); @@ -5229,6 +5265,8 @@ static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg) if (err) goto default_conf_out; + brcmf_configure_arp_offload(ifp, true); + cfg->dongle_up = true; default_conf_out: -- cgit v1.2.3 From 15a953d0919e3e7c94691ecabd0d9f74373f19aa Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Mon, 27 May 2013 21:09:54 +0200 Subject: brcmfmac: Fix p2p setup when connected to ap on 5G. The firmware requires that on p2p setup when net interfaces are created or updated that they start initially with the same channel as the channel in use for the current connection (if any). If none exists take default channel 11. Reviewed-by: Arend Van Spriel Reviewed-by: Franky (Zhenhui) Lin Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/p2p.c | 28 ++++++++++++++++++++------- 1 file changed, 21 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index e7a1a4770996..17275ceb686c 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -47,6 +47,7 @@ #define IS_P2P_SOCIAL_CHANNEL(channel) ((channel == SOCIAL_CHAN_1) || \ (channel == SOCIAL_CHAN_2) || \ (channel == SOCIAL_CHAN_3)) +#define BRCMF_P2P_TEMP_CHAN SOCIAL_CHAN_3 #define SOCIAL_CHAN_CNT 3 #define AF_PEER_SEARCH_CNT 2 @@ -2013,17 +2014,30 @@ static void brcmf_p2p_get_current_chanspec(struct brcmf_p2p_info *p2p, u16 *chanspec) { struct brcmf_if *ifp; - struct brcmf_fil_chan_info_le ci; + u8 mac_addr[ETH_ALEN]; struct brcmu_chan ch; - s32 err; + struct brcmf_bss_info_le *bi; + u8 *buf; ifp = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp; - ch.chnum = 11; - - err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_CHANNEL, &ci, sizeof(ci)); - if (!err) - ch.chnum = le32_to_cpu(ci.hw_channel); + if (brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSSID, mac_addr, + ETH_ALEN) == 0) { + buf = kzalloc(WL_BSS_INFO_MAX, GFP_KERNEL); + if (buf != NULL) { + *(__le32 *)buf = cpu_to_le32(WL_BSS_INFO_MAX); + if (brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSS_INFO, + buf, WL_BSS_INFO_MAX) == 0) { + bi = (struct brcmf_bss_info_le *)(buf + 4); + *chanspec = le16_to_cpu(bi->chanspec); + kfree(buf); + return; + } + kfree(buf); + } + } + /* Use default channel for P2P */ + ch.chnum = BRCMF_P2P_TEMP_CHAN; ch.bw = BRCMU_CHAN_BW_20; p2p->cfg->d11inf.encchspec(&ch); *chanspec = ch.chspec; -- cgit v1.2.3 From 24e28beef939df8666a5d2784d6617cd9bb910a0 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Mon, 27 May 2013 21:09:55 +0200 Subject: brcmfmac: add additional parameter to brcmf_free_vif() Pass the struct brcmf_cfg80211_info instance instead of obtaining through vif itself using vif->wdev. This is needed as the netdev associated with this vif is already unregistered. Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/p2p.c | 25 +++++++++++----------- .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 17 ++++++--------- .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.h | 3 ++- 3 files changed, 20 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index 17275ceb686c..167b7afdf0d8 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -1955,21 +1955,21 @@ s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg) err = brcmf_fil_iovar_int_set(pri_ifp, "p2p_disc", 1); if (err < 0) { brcmf_err("set p2p_disc error\n"); - brcmf_free_vif(p2p_vif); + brcmf_free_vif(cfg, p2p_vif); goto exit; } /* obtain bsscfg index for P2P discovery */ err = brcmf_fil_iovar_int_get(pri_ifp, "p2p_dev", &bssidx); if (err < 0) { brcmf_err("retrieving discover bsscfg index failed\n"); - brcmf_free_vif(p2p_vif); + brcmf_free_vif(cfg, p2p_vif); goto exit; } /* Verify that firmware uses same bssidx as driver !! */ if (p2p_ifp->bssidx != bssidx) { brcmf_err("Incorrect bssidx=%d, compared to p2p_ifp->bssidx=%d\n", bssidx, p2p_ifp->bssidx); - brcmf_free_vif(p2p_vif); + brcmf_free_vif(cfg, p2p_vif); goto exit; } @@ -1997,7 +1997,7 @@ void brcmf_p2p_detach(struct brcmf_p2p_info *p2p) brcmf_p2p_cancel_remain_on_channel(vif->ifp); brcmf_p2p_deinit_discovery(p2p); /* remove discovery interface */ - brcmf_free_vif(vif); + brcmf_free_vif(p2p->cfg, vif); p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL; } /* just set it all to zero */ @@ -2222,7 +2222,7 @@ static struct wireless_dev *brcmf_p2p_create_p2pdev(struct brcmf_p2p_info *p2p, return &p2p_vif->wdev; fail: - brcmf_free_vif(p2p_vif); + brcmf_free_vif(p2p->cfg, p2p_vif); return ERR_PTR(err); } @@ -2231,13 +2231,12 @@ fail: * * @vif: virtual interface object to delete. */ -static void brcmf_p2p_delete_p2pdev(struct brcmf_cfg80211_vif *vif) +static void brcmf_p2p_delete_p2pdev(struct brcmf_cfg80211_info *cfg, + struct brcmf_cfg80211_vif *vif) { - struct brcmf_p2p_info *p2p = &vif->ifp->drvr->config->p2p; - cfg80211_unregister_wdev(&vif->wdev); - p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL; - brcmf_free_vif(vif); + cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL; + brcmf_free_vif(cfg, vif); } /** @@ -2328,7 +2327,7 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, return &ifp->vif->wdev; fail: - brcmf_free_vif(vif); + brcmf_free_vif(cfg, vif); return ERR_PTR(err); } @@ -2364,7 +2363,7 @@ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) break; case NL80211_IFTYPE_P2P_DEVICE: - brcmf_p2p_delete_p2pdev(vif); + brcmf_p2p_delete_p2pdev(cfg, vif); return 0; default: return -ENOTSUPP; @@ -2392,7 +2391,7 @@ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) err = 0; } brcmf_cfg80211_arm_vif_event(cfg, NULL); - brcmf_free_vif(vif); + brcmf_free_vif(cfg, vif); p2p->bss_idx[P2PAPI_BSSCFG_CONNECTION].vif = NULL; return err; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 94285f634a48..f8c86b58a6d1 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -4292,20 +4292,16 @@ struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg, return vif; } -void brcmf_free_vif(struct brcmf_cfg80211_vif *vif) +void brcmf_free_vif(struct brcmf_cfg80211_info *cfg, + struct brcmf_cfg80211_vif *vif) { - struct brcmf_cfg80211_info *cfg; - struct wiphy *wiphy; - - wiphy = vif->wdev.wiphy; - cfg = wiphy_priv(wiphy); list_del(&vif->list); cfg->vif_cnt--; kfree(vif); if (!cfg->vif_cnt) { - wiphy_unregister(wiphy); - wiphy_free(wiphy); + wiphy_unregister(cfg->wiphy); + wiphy_free(cfg->wiphy); } } @@ -4888,8 +4884,7 @@ cfg80211_p2p_attach_out: wl_deinit_priv(cfg); cfg80211_attach_out: - brcmf_free_vif(vif); - wiphy_free(wiphy); + brcmf_free_vif(cfg, vif); return NULL; } @@ -4901,7 +4896,7 @@ void brcmf_cfg80211_detach(struct brcmf_cfg80211_info *cfg) wl_deinit_priv(cfg); brcmf_btcoex_detach(cfg); list_for_each_entry_safe(vif, tmp, &cfg->vif_list, list) { - brcmf_free_vif(vif); + brcmf_free_vif(cfg, vif); } } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h index a71cff84cdcf..d9bdaf9a72d0 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h @@ -487,7 +487,8 @@ enum nl80211_iftype brcmf_cfg80211_get_iftype(struct brcmf_if *ifp); struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg, enum nl80211_iftype type, bool pm_block); -void brcmf_free_vif(struct brcmf_cfg80211_vif *vif); +void brcmf_free_vif(struct brcmf_cfg80211_info *cfg, + struct brcmf_cfg80211_vif *vif); s32 brcmf_vif_set_mgmt_ie(struct brcmf_cfg80211_vif *vif, s32 pktflag, const u8 *vndr_ie_buf, u32 vndr_ie_len); -- cgit v1.2.3 From 9390ace916b2fd866c1762b1cd16c276d8c8c890 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Mon, 27 May 2013 21:09:56 +0200 Subject: brcmfmac: free net device when registration fails When registration fails the net device is no longer needed. Free the net device and remove reference to private data from the driver. Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c | 10 +++++++--- drivers/net/wireless/brcm80211/brcmfmac/fweh.c | 3 ++- 2 files changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 59c25463e428..f04e3555dca3 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -656,7 +656,9 @@ int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked) return 0; fail: + drvr->iflist[ifp->bssidx] = NULL; ndev->netdev_ops = NULL; + free_netdev(ndev); return -EBADE; } @@ -720,6 +722,9 @@ static int brcmf_net_p2p_attach(struct brcmf_if *ifp) return 0; fail: + ifp->drvr->iflist[ifp->bssidx] = NULL; + ndev->netdev_ops = NULL; + free_netdev(ndev); return -EBADE; } @@ -925,8 +930,6 @@ fail: brcmf_fws_del_interface(ifp); brcmf_fws_deinit(drvr); } - free_netdev(ifp->ndev); - drvr->iflist[0] = NULL; if (p2p_ifp) { free_netdev(p2p_ifp->ndev); drvr->iflist[1] = NULL; @@ -934,7 +937,8 @@ fail: return ret; } if ((brcmf_p2p_enable) && (p2p_ifp)) - brcmf_net_p2p_attach(p2p_ifp); + if (brcmf_net_p2p_attach(p2p_ifp) < 0) + brcmf_p2p_enable = 0; return 0; } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c index 5a64280e6485..83ee53a7c76e 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c @@ -202,7 +202,8 @@ static void brcmf_fweh_handle_if_event(struct brcmf_pub *drvr, return; brcmf_fws_add_interface(ifp); if (!drvr->fweh.evt_handler[BRCMF_E_IF]) - err = brcmf_net_attach(ifp, false); + if (brcmf_net_attach(ifp, false) < 0) + return; } if (ifevent->action == BRCMF_E_IF_CHANGE) -- cgit v1.2.3 From cbb371da233eb2b4c200010a5372579b880b4ae6 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Mon, 27 May 2013 21:09:57 +0200 Subject: brcmfmac: use struct net_device::destructor to remove interfaces Upon deleting a P2P_CLIENT/GO interface the vif and consequently the wdev is freed before the net_device is actually being unregistered but cfg80211 still needs to access the wdev. Using destructor field to free the net_device and vif. Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../net/wireless/brcm80211/brcmfmac/dhd_linux.c | 6 +++--- drivers/net/wireless/brcm80211/brcmfmac/p2p.c | 23 +++++++++++++++++++++- .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 1 - 3 files changed, 25 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index f04e3555dca3..b98f2235978e 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -653,6 +653,7 @@ int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked) brcmf_dbg(INFO, "%s: Broadcom Dongle Host Driver\n", ndev->name); + ndev->destructor = free_netdev; return 0; fail: @@ -793,6 +794,7 @@ void brcmf_del_if(struct brcmf_pub *drvr, s32 bssidx) struct brcmf_if *ifp; ifp = drvr->iflist[bssidx]; + drvr->iflist[bssidx] = NULL; if (!ifp) { brcmf_err("Null interface, idx=%d\n", bssidx); return; @@ -813,15 +815,13 @@ void brcmf_del_if(struct brcmf_pub *drvr, s32 bssidx) cancel_work_sync(&ifp->setmacaddr_work); cancel_work_sync(&ifp->multicast_work); } - + /* unregister will take care of freeing it */ unregister_netdev(ifp->ndev); if (bssidx == 0) brcmf_cfg80211_detach(drvr->config); - free_netdev(ifp->ndev); } else { kfree(ifp); } - drvr->iflist[bssidx] = NULL; } int brcmf_attach(uint bus_hdrlen, struct device *dev) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index 167b7afdf0d8..79555f006d53 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -2239,6 +2239,25 @@ static void brcmf_p2p_delete_p2pdev(struct brcmf_cfg80211_info *cfg, brcmf_free_vif(cfg, vif); } +/** + * brcmf_p2p_free_p2p_if() - free up net device related data. + * + * @ndev: net device that needs to be freed. + */ +static void brcmf_p2p_free_p2p_if(struct net_device *ndev) +{ + struct brcmf_cfg80211_info *cfg; + struct brcmf_cfg80211_vif *vif; + struct brcmf_if *ifp; + + ifp = netdev_priv(ndev); + cfg = ifp->drvr->config; + vif = ifp->vif; + + brcmf_free_vif(cfg, vif); + free_netdev(ifp->ndev); +} + /** * brcmf_p2p_add_vif() - create a new P2P virtual interface. * @@ -2316,6 +2335,9 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, brcmf_err("Registering netdevice failed\n"); goto fail; } + /* override destructor */ + ifp->ndev->destructor = brcmf_p2p_free_p2p_if; + cfg->p2p.bss_idx[P2PAPI_BSSCFG_CONNECTION].vif = vif; /* Disable firmware roaming for P2P interface */ brcmf_fil_iovar_int_set(ifp, "roam_off", 1); @@ -2391,7 +2413,6 @@ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) err = 0; } brcmf_cfg80211_arm_vif_event(cfg, NULL); - brcmf_free_vif(cfg, vif); p2p->bss_idx[P2PAPI_BSSCFG_CONNECTION].vif = NULL; return err; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index f8c86b58a6d1..656ce8765863 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -4678,7 +4678,6 @@ static s32 brcmf_notify_vif_event(struct brcmf_if *ifp, return 0; case BRCMF_E_IF_DEL: - ifp->vif = NULL; mutex_unlock(&event->vif_event_lock); /* event may not be upon user request */ if (brcmf_cfg80211_vif_event_armed(cfg)) -- cgit v1.2.3 From 1c9d30cfac9901c4f7447deacdfb6b77eee1a096 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Mon, 27 May 2013 21:09:58 +0200 Subject: brcmfmac: Add multi channel support for P2P. Multi channel support was disabled. This patch will enable it and configure the P2P GO on the correct frequency when multi channel is used. Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 26 +++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 656ce8765863..6a8717820b9f 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -3671,11 +3671,29 @@ brcmf_config_ap_mgmt_ie(struct brcmf_cfg80211_vif *vif, return err; } +static s32 +brcmf_cfg80211_set_channel(struct brcmf_cfg80211_info *cfg, + struct brcmf_if *ifp, + struct ieee80211_channel *channel) +{ + u16 chanspec; + s32 err; + + brcmf_dbg(TRACE, "band=%d, center_freq=%d\n", channel->band, + channel->center_freq); + + chanspec = channel_to_chanspec(&cfg->d11inf, channel); + err = brcmf_fil_iovar_int_set(ifp, "chanspec", chanspec); + + return err; +} + static s32 brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, struct cfg80211_ap_settings *settings) { s32 ie_offset; + struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); struct brcmf_if *ifp = netdev_priv(ndev); struct brcmf_tlv *ssid_ie; struct brcmf_ssid_le ssid_le; @@ -3746,6 +3764,12 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, brcmf_config_ap_mgmt_ie(ifp->vif, &settings->beacon); + err = brcmf_cfg80211_set_channel(cfg, ifp, settings->chandef.chan); + if (err < 0) { + brcmf_err("Set Channel failed, %d\n", err); + goto exit; + } + if (settings->beacon_interval) { err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_BCNPRD, settings->beacon_interval); @@ -4184,7 +4208,7 @@ static const struct ieee80211_iface_limit brcmf_iface_limits[] = { static const struct ieee80211_iface_combination brcmf_iface_combos[] = { { .max_interfaces = BRCMF_IFACE_MAX_CNT, - .num_different_channels = 1, /* no multi-channel for now */ + .num_different_channels = 2, .n_limits = ARRAY_SIZE(brcmf_iface_limits), .limits = brcmf_iface_limits } -- cgit v1.2.3 From 102fd0d69eed4c778555fe957f8660dfee1568ea Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Mon, 27 May 2013 21:09:59 +0200 Subject: brcmfmac: Disable powersave mode for P2P link. For p2p client mode powersave mode should be kept disabled. It is working but inefficient. In general p2p links do no benefit from this mode, because these links are setup temporarily to transfer data. Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 6a8717820b9f..301e572e8923 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -2248,6 +2248,11 @@ brcmf_cfg80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *ndev, } pm = enabled ? PM_FAST : PM_OFF; + /* Do not enable the power save after assoc if it is a p2p interface */ + if (ifp->vif->wdev.iftype == NL80211_IFTYPE_P2P_CLIENT) { + brcmf_dbg(INFO, "Do not enable power save for P2P clients\n"); + pm = PM_OFF; + } brcmf_dbg(INFO, "power save %s\n", (pm ? "enabled" : "disabled")); err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM, pm); -- cgit v1.2.3 From add295a4afbdf5852d004c754c552d692b0fcac8 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Tue, 28 May 2013 14:52:19 +0200 Subject: ath9k: use correct OTP register offsets for AR9550 Accessing the OTP memory on AR9950 causes a data bus like this: Data bus error, epc == 801f7774, ra == 801f7774 Oops[#1]: CPU: 0 PID: 1 Comm: swapper Not tainted 3.10.0-rc3 #592 task: 87c28000 ti: 87c22000 task.ti: 87c22000 $ 0 : 00000000 00000061 deadc0de 00000000 $ 4 : b8115f18 00015f18 00000007 00000004 $ 8 : 00000001 7c7c3c7c 7c7c7c7c 7c7c7c7c $12 : 7c7c3c7c 80320a68 00000000 7c7c7c3c $16 : 87cd8010 00015f18 00000007 00000000 $20 : 00000064 00000004 87c23c7c 8035210c $24 : 00000000 801f3674 $28 : 87c22000 87c23b48 00000001 801f7774 Hi : 00000000 Lo : 00000064 epc : 801f7774 ath9k_hw_wait+0x58/0xb0 Not tainted ra : 801f7774 ath9k_hw_wait+0x58/0xb0 Status: 1000cc03 KERNEL EXL IE Cause : 4080801c PrId : 00019750 (MIPS 74Kc) Modules linked in: Process swapper (pid: 1, threadinfo=87c22000, task=87c28000, ts=00000000) Stack : 0000000f 00000061 00002710 8006240c 00000001 87cd8010 87c23bb0 87cd8010 00000000 00000004 00000003 80210c7c 000000b3 67fa8000 0000032a 000006fe 000003e8 00000002 00000028 87c23bf0 000003ff 80210d24 803e5630 80210e28 00000000 00000007 87cd8010 00007044 00000004 00000061 000003ff 000001ff 87c26000 87cd8010 00000220 87cd8bb8 80210000 8020fcf4 87c22000 87c23c08 ... Call Trace: [<801f7774>] ath9k_hw_wait+0x58/0xb0 [<80210c7c>] ar9300_otp_read_word+0x80/0xd4 [<80210d24>] ar9300_read_otp+0x54/0xb0 [<8020fcf4>] ar9300_check_eeprom_header+0x1c/0x40 [<80210fe4>] ath9k_hw_ar9300_fill_eeprom+0x118/0x39c [<80206650>] ath9k_hw_eeprom_init+0x74/0xb4 [<801f96d0>] ath9k_hw_init+0x7ec/0x96c [<801e65ec>] ath9k_init_device+0x340/0x758 [<801f35d0>] ath_ahb_probe+0x21c/0x2c0 [<801c041c>] driver_probe_device+0xc0/0x1e4 [<801c05ac>] __driver_attach+0x6c/0xa4 [<801bea08>] bus_for_each_dev+0x64/0xa8 [<801bfa40>] bus_add_driver+0xcc/0x24c [<801c0954>] driver_register+0xbc/0x17c [<803f8fc0>] ath9k_init+0x5c/0x88 [<800608fc>] do_one_initcall+0xec/0x1a0 [<803e6a68>] kernel_init_freeable+0x13c/0x200 [<80309cdc>] kernel_init+0x1c/0xe4 [<80062450>] ret_from_kernel_thread+0x10/0x18 On the AR9550, the OTP registers are located at the same address as on the AR9340. Use the correct values to avoid the error. Cc: stable@vger.kernel.org # 3.6+ Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_eeprom.h | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h index 54ba42f4108a..874f6570bd1c 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h @@ -68,13 +68,16 @@ #define AR9300_BASE_ADDR 0x3ff #define AR9300_BASE_ADDR_512 0x1ff -#define AR9300_OTP_BASE (AR_SREV_9340(ah) ? 0x30000 : 0x14000) -#define AR9300_OTP_STATUS (AR_SREV_9340(ah) ? 0x30018 : 0x15f18) +#define AR9300_OTP_BASE \ + ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x30000 : 0x14000) +#define AR9300_OTP_STATUS \ + ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x30018 : 0x15f18) #define AR9300_OTP_STATUS_TYPE 0x7 #define AR9300_OTP_STATUS_VALID 0x4 #define AR9300_OTP_STATUS_ACCESS_BUSY 0x2 #define AR9300_OTP_STATUS_SM_BUSY 0x1 -#define AR9300_OTP_READ_DATA (AR_SREV_9340(ah) ? 0x3001c : 0x15f1c) +#define AR9300_OTP_READ_DATA \ + ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x3001c : 0x15f1c) enum targetPowerHTRates { HT_TARGET_RATE_0_8_16, -- cgit v1.2.3 From 8e6d91ae0917bf934ed86411148f79d904728d51 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Tue, 28 May 2013 18:32:11 +0000 Subject: tuntap: forbid changing mq flag for persistent device We currently allow changing the mq flag (IFF_MULTI_QUEUE) for a persistent device. This will result a mismatch between the number the queues in netdev and tuntap. This is because we only allocate a 1q netdevice when IFF_MULTI_QUEUE was not specified, so when we set the IFF_MULTI_QUEUE and try to attach more queues later, netif_set_real_num_tx_queues() may fail which result a single queue netdevice with multiple sockets attached. Solve this by disallowing changing the mq flag for persistent device. Bug was introduced by commit edfb6a148ce62e5e19354a1dcd9a34e00815c2a1 (tuntap: reduce memory using of queues). Reported-by: Sriram Narasimhan Cc: Michael S. Tsirkin Signed-off-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/tun.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/tun.c b/drivers/net/tun.c index f042b0373e5d..89776c592151 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1585,6 +1585,10 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) else return -EINVAL; + if (!!(ifr->ifr_flags & IFF_MULTI_QUEUE) != + !!(tun->flags & TUN_TAP_MQ)) + return -EINVAL; + if (tun_not_capable(tun)) return -EPERM; err = security_tun_dev_open(tun->security); -- cgit v1.2.3 From e38b170695d4108eeb6cd84db36f567fc6de4120 Mon Sep 17 00:00:00 2001 From: Somnath Kotur Date: Wed, 29 May 2013 22:55:56 +0000 Subject: be2net: Mark checksum fail for IP fragmented packets HW does not compute L4 checksum for IP Fragmented packets. Signed-off-by: Kalesh AP Signed-off-by: Somnath Kotur Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be.h | 1 + drivers/net/ethernet/emulex/benet/be_hw.h | 2 +- drivers/net/ethernet/emulex/benet/be_main.c | 7 ++++++- 3 files changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h index f544b297c9ab..0a510684e468 100644 --- a/drivers/net/ethernet/emulex/benet/be.h +++ b/drivers/net/ethernet/emulex/benet/be.h @@ -262,6 +262,7 @@ struct be_rx_compl_info { u8 ipv6; u8 vtm; u8 pkt_type; + u8 ip_frag; }; struct be_rx_obj { diff --git a/drivers/net/ethernet/emulex/benet/be_hw.h b/drivers/net/ethernet/emulex/benet/be_hw.h index 3c1099b47f2a..8780183c6d1c 100644 --- a/drivers/net/ethernet/emulex/benet/be_hw.h +++ b/drivers/net/ethernet/emulex/benet/be_hw.h @@ -356,7 +356,7 @@ struct amap_eth_rx_compl_v0 { u8 ip_version; /* dword 1 */ u8 macdst[6]; /* dword 1 */ u8 vtp; /* dword 1 */ - u8 rsvd0; /* dword 1 */ + u8 ip_frag; /* dword 1 */ u8 fragndx[10]; /* dword 1 */ u8 ct[2]; /* dword 1 */ u8 sw; /* dword 1 */ diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index ca2967b0f18b..32a6927ca977 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -1599,6 +1599,8 @@ static void be_parse_rx_compl_v0(struct be_eth_rx_compl *compl, compl); } rxcp->port = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, port, compl); + rxcp->ip_frag = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, + ip_frag, compl); } static struct be_rx_compl_info *be_rx_compl_get(struct be_rx_obj *rxo) @@ -1620,6 +1622,9 @@ static struct be_rx_compl_info *be_rx_compl_get(struct be_rx_obj *rxo) else be_parse_rx_compl_v0(compl, rxcp); + if (rxcp->ip_frag) + rxcp->l4_csum = 0; + if (rxcp->vlanf) { /* vlanf could be wrongly set in some cards. * ignore if vtm is not set */ @@ -2168,7 +2173,7 @@ static irqreturn_t be_msix(int irq, void *dev) static inline bool do_gro(struct be_rx_compl_info *rxcp) { - return (rxcp->tcpf && !rxcp->err) ? true : false; + return (rxcp->tcpf && !rxcp->err && rxcp->l4_csum) ? true : false; } static int be_process_rx(struct be_rx_obj *rxo, struct napi_struct *napi, -- cgit v1.2.3 From 01e5b2c4559d084f4eaf0d160d84cc185db141ba Mon Sep 17 00:00:00 2001 From: Somnath Kotur Date: Wed, 29 May 2013 22:56:17 +0000 Subject: be2net: Fix crash on 2nd invocation of PCI AER/EEH error_detected hook During a PCI EEH/AER error recovery flow, if the device did not successfully restart, the error_detected() hook may be called a second time with a "perm_failure" state. This patch skips over driver cleanup for the second invocation of the callback. Also, Lancer error recovery code is fixed-up to handle these changes. Signed-off-by: Kalesh AP Signed-off-by: Somnath kotur Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_cmds.c | 6 ++-- drivers/net/ethernet/emulex/benet/be_main.c | 48 ++++++++++++++--------------- 2 files changed, 26 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index a236ecd27cf3..1db2df61b8af 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -562,7 +562,7 @@ int lancer_test_and_set_rdy_state(struct be_adapter *adapter) resource_error = lancer_provisioning_error(adapter); if (resource_error) - return -1; + return -EAGAIN; status = lancer_wait_ready(adapter); if (!status) { @@ -590,8 +590,8 @@ int lancer_test_and_set_rdy_state(struct be_adapter *adapter) * when PF provisions resources. */ resource_error = lancer_provisioning_error(adapter); - if (status == -1 && !resource_error) - adapter->eeh_error = true; + if (resource_error) + status = -EAGAIN; return status; } diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 32a6927ca977..8bc1b21b1c79 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -4098,6 +4098,7 @@ static int be_get_initial_config(struct be_adapter *adapter) static int lancer_recover_func(struct be_adapter *adapter) { + struct device *dev = &adapter->pdev->dev; int status; status = lancer_test_and_set_rdy_state(adapter); @@ -4109,8 +4110,7 @@ static int lancer_recover_func(struct be_adapter *adapter) be_clear(adapter); - adapter->hw_error = false; - adapter->fw_timeout = false; + be_clear_all_error(adapter); status = be_setup(adapter); if (status) @@ -4122,13 +4122,13 @@ static int lancer_recover_func(struct be_adapter *adapter) goto err; } - dev_err(&adapter->pdev->dev, - "Adapter SLIPORT recovery succeeded\n"); + dev_err(dev, "Error recovery successful\n"); return 0; err: - if (adapter->eeh_error) - dev_err(&adapter->pdev->dev, - "Adapter SLIPORT recovery failed\n"); + if (status == -EAGAIN) + dev_err(dev, "Waiting for resource provisioning\n"); + else + dev_err(dev, "Error recovery failed\n"); return status; } @@ -4137,28 +4137,27 @@ static void be_func_recovery_task(struct work_struct *work) { struct be_adapter *adapter = container_of(work, struct be_adapter, func_recovery_work.work); - int status; + int status = 0; be_detect_error(adapter); if (adapter->hw_error && lancer_chip(adapter)) { - if (adapter->eeh_error) - goto out; - rtnl_lock(); netif_device_detach(adapter->netdev); rtnl_unlock(); status = lancer_recover_func(adapter); - if (!status) netif_device_attach(adapter->netdev); } -out: - schedule_delayed_work(&adapter->func_recovery_work, - msecs_to_jiffies(1000)); + /* In Lancer, for all errors other than provisioning error (-EAGAIN), + * no need to attempt further recovery. + */ + if (!status || status == -EAGAIN) + schedule_delayed_work(&adapter->func_recovery_work, + msecs_to_jiffies(1000)); } static void be_worker(struct work_struct *work) @@ -4441,20 +4440,19 @@ static pci_ers_result_t be_eeh_err_detected(struct pci_dev *pdev, dev_err(&adapter->pdev->dev, "EEH error detected\n"); - adapter->eeh_error = true; - - cancel_delayed_work_sync(&adapter->func_recovery_work); + if (!adapter->eeh_error) { + adapter->eeh_error = true; - rtnl_lock(); - netif_device_detach(netdev); - rtnl_unlock(); + cancel_delayed_work_sync(&adapter->func_recovery_work); - if (netif_running(netdev)) { rtnl_lock(); - be_close(netdev); + netif_device_detach(netdev); + if (netif_running(netdev)) + be_close(netdev); rtnl_unlock(); + + be_clear(adapter); } - be_clear(adapter); if (state == pci_channel_io_perm_failure) return PCI_ERS_RESULT_DISCONNECT; @@ -4479,7 +4477,6 @@ static pci_ers_result_t be_eeh_reset(struct pci_dev *pdev) int status; dev_info(&adapter->pdev->dev, "EEH reset\n"); - be_clear_all_error(adapter); status = pci_enable_device(pdev); if (status) @@ -4497,6 +4494,7 @@ static pci_ers_result_t be_eeh_reset(struct pci_dev *pdev) return PCI_ERS_RESULT_DISCONNECT; pci_cleanup_aer_uncorrect_error_status(pdev); + be_clear_all_error(adapter); return PCI_ERS_RESULT_RECOVERED; } -- cgit v1.2.3 From 3f3e7ce4ff87c8ea69acaa7700699fb26baa2914 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Wed, 29 May 2013 05:02:57 +0000 Subject: team: fix port list dump for big number of ports In case the port list dump does not fit into one skb currently the dump would start over again. Fix this by continue from the last dumped port. Introduced by commit d90f889e9c (team: handle sending port list in the same way option list is sent) Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/team/team.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 7c43261975bd..d016a76ad44b 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -2374,7 +2374,8 @@ static int team_nl_send_port_list_get(struct team *team, u32 portid, u32 seq, bool incomplete; int i; - port = list_first_entry(&team->port_list, struct team_port, list); + port = list_first_entry_or_null(&team->port_list, + struct team_port, list); start_again: err = __send_and_alloc_skb(&skb, team, portid, send_func); @@ -2402,8 +2403,8 @@ start_again: err = team_nl_fill_one_port_get(skb, one_port); if (err) goto errout; - } else { - list_for_each_entry(port, &team->port_list, list) { + } else if (port) { + list_for_each_entry_from(port, &team->port_list, list) { err = team_nl_fill_one_port_get(skb, port); if (err) { if (err == -EMSGSIZE) { -- cgit v1.2.3 From c802db1164f28e62c6a43132b8d290cb8113f2ac Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Tue, 28 May 2013 06:15:56 +0000 Subject: hyperv: Fix vlan_proto setting in netvsc_recv_callback() Since the recent addition of 8021AD, we need to set the new field vlan_proto in sk_buff. Otherwise, it will trigger BUG() call in vlan_proto_idx(). This patch fixes the problem. Signed-off-by: Haiyang Zhang Reviewed-by: K. Y. Srinivasan Signed-off-by: David S. Miller --- drivers/net/hyperv/netvsc_drv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index 088c55496191..ab2307b5d9a7 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include @@ -284,7 +285,7 @@ int netvsc_recv_callback(struct hv_device *device_obj, skb->protocol = eth_type_trans(skb, net); skb->ip_summed = CHECKSUM_NONE; - skb->vlan_tci = packet->vlan_tci; + __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), packet->vlan_tci); net->stats.rx_packets++; net->stats.rx_bytes += packet->total_data_buflen; -- cgit v1.2.3 From a90f13b24fb40d02d11496cce6a10ae8d4b319b2 Mon Sep 17 00:00:00 2001 From: Jonas Peterson Date: Tue, 7 May 2013 22:05:23 +0200 Subject: net: can: kvaser_usb: fix reception on "USBcan Pro" and "USBcan R" type hardware. Unlike Kvaser Leaf light devices, some other Kvaser devices (like USBcan Pro, USBcan R) receive CAN messages in CMD_LOG_MESSAGE frames. This patch adds support for it. Cc: linux-stable # >= v3.8 Signed-off-by: Jonas Peterson Signed-off-by: Olivier Sobrie Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/kvaser_usb.c | 64 +++++++++++++++++++++++++++------------- 1 file changed, 43 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c index 45cb9f3c1324..3b9546588240 100644 --- a/drivers/net/can/usb/kvaser_usb.c +++ b/drivers/net/can/usb/kvaser_usb.c @@ -136,6 +136,9 @@ #define KVASER_CTRL_MODE_SELFRECEPTION 3 #define KVASER_CTRL_MODE_OFF 4 +/* log message */ +#define KVASER_EXTENDED_FRAME BIT(31) + struct kvaser_msg_simple { u8 tid; u8 channel; @@ -817,8 +820,13 @@ static void kvaser_usb_rx_can_msg(const struct kvaser_usb *dev, priv = dev->nets[channel]; stats = &priv->netdev->stats; - if (msg->u.rx_can.flag & (MSG_FLAG_ERROR_FRAME | MSG_FLAG_NERR | - MSG_FLAG_OVERRUN)) { + if ((msg->u.rx_can.flag & MSG_FLAG_ERROR_FRAME) && + (msg->id == CMD_LOG_MESSAGE)) { + kvaser_usb_rx_error(dev, msg); + return; + } else if (msg->u.rx_can.flag & (MSG_FLAG_ERROR_FRAME | + MSG_FLAG_NERR | + MSG_FLAG_OVERRUN)) { kvaser_usb_rx_can_err(priv, msg); return; } else if (msg->u.rx_can.flag & ~MSG_FLAG_REMOTE_FRAME) { @@ -834,22 +842,40 @@ static void kvaser_usb_rx_can_msg(const struct kvaser_usb *dev, return; } - cf->can_id = ((msg->u.rx_can.msg[0] & 0x1f) << 6) | - (msg->u.rx_can.msg[1] & 0x3f); - cf->can_dlc = get_can_dlc(msg->u.rx_can.msg[5]); + if (msg->id == CMD_LOG_MESSAGE) { + cf->can_id = le32_to_cpu(msg->u.log_message.id); + if (cf->can_id & KVASER_EXTENDED_FRAME) + cf->can_id &= CAN_EFF_MASK | CAN_EFF_FLAG; + else + cf->can_id &= CAN_SFF_MASK; - if (msg->id == CMD_RX_EXT_MESSAGE) { - cf->can_id <<= 18; - cf->can_id |= ((msg->u.rx_can.msg[2] & 0x0f) << 14) | - ((msg->u.rx_can.msg[3] & 0xff) << 6) | - (msg->u.rx_can.msg[4] & 0x3f); - cf->can_id |= CAN_EFF_FLAG; - } + cf->can_dlc = get_can_dlc(msg->u.log_message.dlc); - if (msg->u.rx_can.flag & MSG_FLAG_REMOTE_FRAME) - cf->can_id |= CAN_RTR_FLAG; - else - memcpy(cf->data, &msg->u.rx_can.msg[6], cf->can_dlc); + if (msg->u.log_message.flags & MSG_FLAG_REMOTE_FRAME) + cf->can_id |= CAN_RTR_FLAG; + else + memcpy(cf->data, &msg->u.log_message.data, + cf->can_dlc); + } else { + cf->can_id = ((msg->u.rx_can.msg[0] & 0x1f) << 6) | + (msg->u.rx_can.msg[1] & 0x3f); + + if (msg->id == CMD_RX_EXT_MESSAGE) { + cf->can_id <<= 18; + cf->can_id |= ((msg->u.rx_can.msg[2] & 0x0f) << 14) | + ((msg->u.rx_can.msg[3] & 0xff) << 6) | + (msg->u.rx_can.msg[4] & 0x3f); + cf->can_id |= CAN_EFF_FLAG; + } + + cf->can_dlc = get_can_dlc(msg->u.rx_can.msg[5]); + + if (msg->u.rx_can.flag & MSG_FLAG_REMOTE_FRAME) + cf->can_id |= CAN_RTR_FLAG; + else + memcpy(cf->data, &msg->u.rx_can.msg[6], + cf->can_dlc); + } netif_rx(skb); @@ -911,6 +937,7 @@ static void kvaser_usb_handle_message(const struct kvaser_usb *dev, case CMD_RX_STD_MESSAGE: case CMD_RX_EXT_MESSAGE: + case CMD_LOG_MESSAGE: kvaser_usb_rx_can_msg(dev, msg); break; @@ -919,11 +946,6 @@ static void kvaser_usb_handle_message(const struct kvaser_usb *dev, kvaser_usb_rx_error(dev, msg); break; - case CMD_LOG_MESSAGE: - if (msg->u.log_message.flags & MSG_FLAG_ERROR_FRAME) - kvaser_usb_rx_error(dev, msg); - break; - case CMD_TX_ACKNOWLEDGE: kvaser_usb_tx_acknowledge(dev, msg); break; -- cgit v1.2.3 From fae37f81fdf3680c5d70abdc57e7b83f4b6c266a Mon Sep 17 00:00:00 2001 From: Olivier Sobrie Date: Fri, 18 Jan 2013 09:14:04 +0100 Subject: net: can: esd_usb2: Do not do dma on the stack smatch reports the following warnings: drivers/net/can/usb/esd_usb2.c:640 esd_usb2_start() error: doing dma on the stack (&msg) drivers/net/can/usb/esd_usb2.c:846 esd_usb2_close() error: doing dma on the stack (&msg) drivers/net/can/usb/esd_usb2.c:855 esd_usb2_close() error: doing dma on the stack (&msg) drivers/net/can/usb/esd_usb2.c:923 esd_usb2_set_bittiming() error: doing dma on the stack (&msg) drivers/net/can/usb/esd_usb2.c:1047 esd_usb2_probe() error: doing dma on the stack (&msg) drivers/net/can/usb/esd_usb2.c:1053 esd_usb2_probe() error: doing dma on the stack (&msg) See "Documentation/DMA-API-HOWTO.txt" section "What memory is DMA'able?" Signed-off-by: Olivier Sobrie Cc: Matthias Fuchs Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/esd_usb2.c | 127 ++++++++++++++++++++++++----------------- 1 file changed, 76 insertions(+), 51 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/usb/esd_usb2.c b/drivers/net/can/usb/esd_usb2.c index 9b74d1e3ad44..6aa7b3266c80 100644 --- a/drivers/net/can/usb/esd_usb2.c +++ b/drivers/net/can/usb/esd_usb2.c @@ -612,9 +612,15 @@ static int esd_usb2_start(struct esd_usb2_net_priv *priv) { struct esd_usb2 *dev = priv->usb2; struct net_device *netdev = priv->netdev; - struct esd_usb2_msg msg; + struct esd_usb2_msg *msg; int err, i; + msg = kmalloc(sizeof(*msg), GFP_KERNEL); + if (!msg) { + err = -ENOMEM; + goto out; + } + /* * Enable all IDs * The IDADD message takes up to 64 32 bit bitmasks (2048 bits). @@ -628,33 +634,32 @@ static int esd_usb2_start(struct esd_usb2_net_priv *priv) * the number of the starting bitmask (0..64) to the filter.option * field followed by only some bitmasks. */ - msg.msg.hdr.cmd = CMD_IDADD; - msg.msg.hdr.len = 2 + ESD_MAX_ID_SEGMENT; - msg.msg.filter.net = priv->index; - msg.msg.filter.option = ESD_ID_ENABLE; /* start with segment 0 */ + msg->msg.hdr.cmd = CMD_IDADD; + msg->msg.hdr.len = 2 + ESD_MAX_ID_SEGMENT; + msg->msg.filter.net = priv->index; + msg->msg.filter.option = ESD_ID_ENABLE; /* start with segment 0 */ for (i = 0; i < ESD_MAX_ID_SEGMENT; i++) - msg.msg.filter.mask[i] = cpu_to_le32(0xffffffff); + msg->msg.filter.mask[i] = cpu_to_le32(0xffffffff); /* enable 29bit extended IDs */ - msg.msg.filter.mask[ESD_MAX_ID_SEGMENT] = cpu_to_le32(0x00000001); + msg->msg.filter.mask[ESD_MAX_ID_SEGMENT] = cpu_to_le32(0x00000001); - err = esd_usb2_send_msg(dev, &msg); + err = esd_usb2_send_msg(dev, msg); if (err) - goto failed; + goto out; err = esd_usb2_setup_rx_urbs(dev); if (err) - goto failed; + goto out; priv->can.state = CAN_STATE_ERROR_ACTIVE; - return 0; - -failed: +out: if (err == -ENODEV) netif_device_detach(netdev); + if (err) + netdev_err(netdev, "couldn't start device: %d\n", err); - netdev_err(netdev, "couldn't start device: %d\n", err); - + kfree(msg); return err; } @@ -833,26 +838,30 @@ nourbmem: static int esd_usb2_close(struct net_device *netdev) { struct esd_usb2_net_priv *priv = netdev_priv(netdev); - struct esd_usb2_msg msg; + struct esd_usb2_msg *msg; int i; + msg = kmalloc(sizeof(*msg), GFP_KERNEL); + if (!msg) + return -ENOMEM; + /* Disable all IDs (see esd_usb2_start()) */ - msg.msg.hdr.cmd = CMD_IDADD; - msg.msg.hdr.len = 2 + ESD_MAX_ID_SEGMENT; - msg.msg.filter.net = priv->index; - msg.msg.filter.option = ESD_ID_ENABLE; /* start with segment 0 */ + msg->msg.hdr.cmd = CMD_IDADD; + msg->msg.hdr.len = 2 + ESD_MAX_ID_SEGMENT; + msg->msg.filter.net = priv->index; + msg->msg.filter.option = ESD_ID_ENABLE; /* start with segment 0 */ for (i = 0; i <= ESD_MAX_ID_SEGMENT; i++) - msg.msg.filter.mask[i] = 0; - if (esd_usb2_send_msg(priv->usb2, &msg) < 0) + msg->msg.filter.mask[i] = 0; + if (esd_usb2_send_msg(priv->usb2, msg) < 0) netdev_err(netdev, "sending idadd message failed\n"); /* set CAN controller to reset mode */ - msg.msg.hdr.len = 2; - msg.msg.hdr.cmd = CMD_SETBAUD; - msg.msg.setbaud.net = priv->index; - msg.msg.setbaud.rsvd = 0; - msg.msg.setbaud.baud = cpu_to_le32(ESD_USB2_NO_BAUDRATE); - if (esd_usb2_send_msg(priv->usb2, &msg) < 0) + msg->msg.hdr.len = 2; + msg->msg.hdr.cmd = CMD_SETBAUD; + msg->msg.setbaud.net = priv->index; + msg->msg.setbaud.rsvd = 0; + msg->msg.setbaud.baud = cpu_to_le32(ESD_USB2_NO_BAUDRATE); + if (esd_usb2_send_msg(priv->usb2, msg) < 0) netdev_err(netdev, "sending setbaud message failed\n"); priv->can.state = CAN_STATE_STOPPED; @@ -861,6 +870,8 @@ static int esd_usb2_close(struct net_device *netdev) close_candev(netdev); + kfree(msg); + return 0; } @@ -886,7 +897,8 @@ static int esd_usb2_set_bittiming(struct net_device *netdev) { struct esd_usb2_net_priv *priv = netdev_priv(netdev); struct can_bittiming *bt = &priv->can.bittiming; - struct esd_usb2_msg msg; + struct esd_usb2_msg *msg; + int err; u32 canbtr; int sjw_shift; @@ -912,15 +924,22 @@ static int esd_usb2_set_bittiming(struct net_device *netdev) if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) canbtr |= ESD_USB2_3_SAMPLES; - msg.msg.hdr.len = 2; - msg.msg.hdr.cmd = CMD_SETBAUD; - msg.msg.setbaud.net = priv->index; - msg.msg.setbaud.rsvd = 0; - msg.msg.setbaud.baud = cpu_to_le32(canbtr); + msg = kmalloc(sizeof(*msg), GFP_KERNEL); + if (!msg) + return -ENOMEM; + + msg->msg.hdr.len = 2; + msg->msg.hdr.cmd = CMD_SETBAUD; + msg->msg.setbaud.net = priv->index; + msg->msg.setbaud.rsvd = 0; + msg->msg.setbaud.baud = cpu_to_le32(canbtr); netdev_info(netdev, "setting BTR=%#x\n", canbtr); - return esd_usb2_send_msg(priv->usb2, &msg); + err = esd_usb2_send_msg(priv->usb2, msg); + + kfree(msg); + return err; } static int esd_usb2_get_berr_counter(const struct net_device *netdev, @@ -1022,7 +1041,7 @@ static int esd_usb2_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct esd_usb2 *dev; - struct esd_usb2_msg msg; + struct esd_usb2_msg *msg; int i, err; dev = kzalloc(sizeof(*dev), GFP_KERNEL); @@ -1037,27 +1056,33 @@ static int esd_usb2_probe(struct usb_interface *intf, usb_set_intfdata(intf, dev); + msg = kmalloc(sizeof(*msg), GFP_KERNEL); + if (!msg) { + err = -ENOMEM; + goto free_msg; + } + /* query number of CAN interfaces (nets) */ - msg.msg.hdr.cmd = CMD_VERSION; - msg.msg.hdr.len = 2; - msg.msg.version.rsvd = 0; - msg.msg.version.flags = 0; - msg.msg.version.drv_version = 0; + msg->msg.hdr.cmd = CMD_VERSION; + msg->msg.hdr.len = 2; + msg->msg.version.rsvd = 0; + msg->msg.version.flags = 0; + msg->msg.version.drv_version = 0; - err = esd_usb2_send_msg(dev, &msg); + err = esd_usb2_send_msg(dev, msg); if (err < 0) { dev_err(&intf->dev, "sending version message failed\n"); - goto free_dev; + goto free_msg; } - err = esd_usb2_wait_msg(dev, &msg); + err = esd_usb2_wait_msg(dev, msg); if (err < 0) { dev_err(&intf->dev, "no version message answer\n"); - goto free_dev; + goto free_msg; } - dev->net_count = (int)msg.msg.version_reply.nets; - dev->version = le32_to_cpu(msg.msg.version_reply.version); + dev->net_count = (int)msg->msg.version_reply.nets; + dev->version = le32_to_cpu(msg->msg.version_reply.version); if (device_create_file(&intf->dev, &dev_attr_firmware)) dev_err(&intf->dev, @@ -1075,10 +1100,10 @@ static int esd_usb2_probe(struct usb_interface *intf, for (i = 0; i < dev->net_count; i++) esd_usb2_probe_one_net(intf, i); - return 0; - -free_dev: - kfree(dev); +free_msg: + kfree(msg); + if (err) + kfree(dev); done: return err; } -- cgit v1.2.3 From f14e22435a27ef183bbfa78f77ad86644c0b354c Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Thu, 16 May 2013 11:36:40 +0200 Subject: net: can: peak_usb: Do not do dma on the stack smatch reports the following warnings: drivers/net/can/usb/peak_usb/pcan_usb_pro.c:514 pcan_usb_pro_drv_loaded() error: doing dma on the stack (buffer) drivers/net/can/usb/peak_usb/pcan_usb_pro.c:878 pcan_usb_pro_init() error: doing dma on the stack (&fi) drivers/net/can/usb/peak_usb/pcan_usb_pro.c:889 pcan_usb_pro_init() error: doing dma on the stack (&bi) See "Documentation/DMA-API-HOWTO.txt" section "What memory is DMA'able?" Cc: Stephane Grosjean Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/peak_usb/pcan_usb_pro.c | 61 +++++++++++++++++++---------- drivers/net/can/usb/peak_usb/pcan_usb_pro.h | 1 + 2 files changed, 41 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c index 30d79bfa5b10..8ee9d1556e6e 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c @@ -504,15 +504,24 @@ static int pcan_usb_pro_restart_async(struct peak_usb_device *dev, return usb_submit_urb(urb, GFP_ATOMIC); } -static void pcan_usb_pro_drv_loaded(struct peak_usb_device *dev, int loaded) +static int pcan_usb_pro_drv_loaded(struct peak_usb_device *dev, int loaded) { - u8 buffer[16]; + u8 *buffer; + int err; + + buffer = kmalloc(PCAN_USBPRO_FCT_DRVLD_REQ_LEN, GFP_KERNEL); + if (!buffer) + return -ENOMEM; buffer[0] = 0; buffer[1] = !!loaded; - pcan_usb_pro_send_req(dev, PCAN_USBPRO_REQ_FCT, - PCAN_USBPRO_FCT_DRVLD, buffer, sizeof(buffer)); + err = pcan_usb_pro_send_req(dev, PCAN_USBPRO_REQ_FCT, + PCAN_USBPRO_FCT_DRVLD, buffer, + PCAN_USBPRO_FCT_DRVLD_REQ_LEN); + kfree(buffer); + + return err; } static inline @@ -851,21 +860,24 @@ static int pcan_usb_pro_stop(struct peak_usb_device *dev) */ static int pcan_usb_pro_init(struct peak_usb_device *dev) { - struct pcan_usb_pro_interface *usb_if; struct pcan_usb_pro_device *pdev = container_of(dev, struct pcan_usb_pro_device, dev); + struct pcan_usb_pro_interface *usb_if = NULL; + struct pcan_usb_pro_fwinfo *fi = NULL; + struct pcan_usb_pro_blinfo *bi = NULL; + int err; /* do this for 1st channel only */ if (!dev->prev_siblings) { - struct pcan_usb_pro_fwinfo fi; - struct pcan_usb_pro_blinfo bi; - int err; - /* allocate netdevices common structure attached to first one */ usb_if = kzalloc(sizeof(struct pcan_usb_pro_interface), GFP_KERNEL); - if (!usb_if) - return -ENOMEM; + fi = kmalloc(sizeof(struct pcan_usb_pro_fwinfo), GFP_KERNEL); + bi = kmalloc(sizeof(struct pcan_usb_pro_blinfo), GFP_KERNEL); + if (!usb_if || !fi || !bi) { + err = -ENOMEM; + goto err_out; + } /* number of ts msgs to ignore before taking one into account */ usb_if->cm_ignore_count = 5; @@ -877,34 +889,34 @@ static int pcan_usb_pro_init(struct peak_usb_device *dev) */ err = pcan_usb_pro_send_req(dev, PCAN_USBPRO_REQ_INFO, PCAN_USBPRO_INFO_FW, - &fi, sizeof(fi)); + fi, sizeof(*fi)); if (err) { - kfree(usb_if); dev_err(dev->netdev->dev.parent, "unable to read %s firmware info (err %d)\n", pcan_usb_pro.name, err); - return err; + goto err_out; } err = pcan_usb_pro_send_req(dev, PCAN_USBPRO_REQ_INFO, PCAN_USBPRO_INFO_BL, - &bi, sizeof(bi)); + bi, sizeof(*bi)); if (err) { - kfree(usb_if); dev_err(dev->netdev->dev.parent, "unable to read %s bootloader info (err %d)\n", pcan_usb_pro.name, err); - return err; + goto err_out; } + /* tell the device the can driver is running */ + err = pcan_usb_pro_drv_loaded(dev, 1); + if (err) + goto err_out; + dev_info(dev->netdev->dev.parent, "PEAK-System %s hwrev %u serial %08X.%08X (%u channels)\n", pcan_usb_pro.name, - bi.hw_rev, bi.serial_num_hi, bi.serial_num_lo, + bi->hw_rev, bi->serial_num_hi, bi->serial_num_lo, pcan_usb_pro.ctrl_count); - - /* tell the device the can driver is running */ - pcan_usb_pro_drv_loaded(dev, 1); } else { usb_if = pcan_usb_pro_dev_if(dev->prev_siblings); } @@ -916,6 +928,13 @@ static int pcan_usb_pro_init(struct peak_usb_device *dev) pcan_usb_pro_set_led(dev, 0, 1); return 0; + + err_out: + kfree(bi); + kfree(fi); + kfree(usb_if); + + return err; } static void pcan_usb_pro_exit(struct peak_usb_device *dev) diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.h b/drivers/net/can/usb/peak_usb/pcan_usb_pro.h index a869918c5620..32275af547e0 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.h +++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.h @@ -29,6 +29,7 @@ /* Vendor Request value for XXX_FCT */ #define PCAN_USBPRO_FCT_DRVLD 5 /* tell device driver is loaded */ +#define PCAN_USBPRO_FCT_DRVLD_REQ_LEN 16 /* PCAN_USBPRO_INFO_BL vendor request record type */ struct __packed pcan_usb_pro_blinfo { -- cgit v1.2.3 From a1c6693a50391683e7f5787bb027b1aae1afbedb Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Tue, 4 Jun 2013 05:13:26 +0000 Subject: net/mlx4_en: Fix adaptive moderation cq update When turning on adaptive_rx under adaptive moderation, the CQ's moderation count wasn't updated according to rx_frames which resulted in too many interrupts and bandwidth drop. Signed-off-by: Sagi Grimberg Signed-off-by: Amir Vadai Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index b35f94700093..810aab01c3c9 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1323,6 +1323,7 @@ static void mlx4_en_auto_moderation(struct mlx4_en_priv *priv) priv->last_moder_time[ring] = moder_time; cq = &priv->rx_cq[ring]; cq->moder_time = moder_time; + cq->moder_cnt = priv->rx_frames; err = mlx4_en_set_cq_moder(priv, cq); if (err) en_err(priv, "Failed modifying moderation for cq:%d\n", -- cgit v1.2.3 From 5efe5355f22fb9b7bb64d19809c0a75805e0ccb8 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Tue, 4 Jun 2013 05:13:27 +0000 Subject: net/mlx4_core: Return -EPROBE_DEFER when a VF is probed before PF is sufficiently initialized In the PF initialization, SRIOV is enabled before the PF is fully initialized. This allows the kernel to probe the newly-exposed VFs before the PF is ready to handle them (nested probes). Have the probe method return the -EPROBE_DEFER value in this situation (instead of the VF probe method retrying its initialization in a loop, and returning -EIO on failure). When -EPROBE_DEFER is returned by the VF probe method, the kernel itself will retry the probe after a suitable delay. Based upon a suggestion by Ben Hutchings Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/cmd.c | 2 -- drivers/net/ethernet/mellanox/mlx4/main.c | 20 ++++++-------------- 2 files changed, 6 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c index 1df56cc50ee9..0e572a527154 100644 --- a/drivers/net/ethernet/mellanox/mlx4/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c @@ -222,8 +222,6 @@ static int mlx4_comm_cmd_poll(struct mlx4_dev *dev, u8 cmd, u16 param, * FLR process. The only non-zero result in the RESET command * is MLX4_DELAY_RESET_SLAVE*/ if ((MLX4_COMM_CMD_RESET == cmd)) { - mlx4_warn(dev, "Got slave FLRed from Communication" - " channel (ret:0x%x)\n", ret_from_pending); err = MLX4_DELAY_RESET_SLAVE; } else { mlx4_warn(dev, "Communication channel timed out\n"); diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 0d32a82458bf..2f4a26039e80 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -1290,7 +1290,6 @@ static int mlx4_init_slave(struct mlx4_dev *dev) { struct mlx4_priv *priv = mlx4_priv(dev); u64 dma = (u64) priv->mfunc.vhcr_dma; - int num_of_reset_retries = NUM_OF_RESET_RETRIES; int ret_from_reset = 0; u32 slave_read; u32 cmd_channel_ver; @@ -1304,18 +1303,10 @@ static int mlx4_init_slave(struct mlx4_dev *dev) * NUM_OF_RESET_RETRIES times before leaving.*/ if (ret_from_reset) { if (MLX4_DELAY_RESET_SLAVE == ret_from_reset) { - msleep(SLEEP_TIME_IN_RESET); - while (ret_from_reset && num_of_reset_retries) { - mlx4_warn(dev, "slave is currently in the" - "middle of FLR. retrying..." - "(try num:%d)\n", - (NUM_OF_RESET_RETRIES - - num_of_reset_retries + 1)); - ret_from_reset = - mlx4_comm_cmd(dev, MLX4_COMM_CMD_RESET, - 0, MLX4_COMM_TIME); - num_of_reset_retries = num_of_reset_retries - 1; - } + mlx4_warn(dev, "slave is currently in the " + "middle of FLR. Deferring probe.\n"); + mutex_unlock(&priv->cmd.slave_cmd_mutex); + return -EPROBE_DEFER; } else goto err; } @@ -1526,7 +1517,8 @@ static int mlx4_init_hca(struct mlx4_dev *dev) } else { err = mlx4_init_slave(dev); if (err) { - mlx4_err(dev, "Failed to initialize slave\n"); + if (err != -EPROBE_DEFER) + mlx4_err(dev, "Failed to initialize slave\n"); return err; } -- cgit v1.2.3 From ef96f7d46ad86625237da8a35e812bdf7896e640 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Tue, 4 Jun 2013 05:13:28 +0000 Subject: net/mlx4_en: Handle unassigned VF MAC address correctly When a VF sense they didn't get MAC address, use random one. This will address the case of administrator not assigning MAC to the VF through the PF OS APIs and keep udev happy. Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 810aab01c3c9..89c47ea84b50 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -2119,6 +2119,7 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, struct mlx4_en_priv *priv; int i; int err; + u64 mac_u64; dev = alloc_etherdev_mqs(sizeof(struct mlx4_en_priv), MAX_TX_RINGS, MAX_RX_RINGS); @@ -2192,10 +2193,17 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, dev->addr_len = ETH_ALEN; mlx4_en_u64_to_mac(dev->dev_addr, mdev->dev->caps.def_mac[priv->port]); if (!is_valid_ether_addr(dev->dev_addr)) { - en_err(priv, "Port: %d, invalid mac burned: %pM, quiting\n", - priv->port, dev->dev_addr); - err = -EINVAL; - goto out; + if (mlx4_is_slave(priv->mdev->dev)) { + eth_hw_addr_random(dev); + en_warn(priv, "Assigned random MAC address %pM\n", dev->dev_addr); + mac_u64 = mlx4_en_mac_to_u64(dev->dev_addr); + mdev->dev->caps.def_mac[priv->port] = mac_u64; + } else { + en_err(priv, "Port: %d, invalid mac burned: %pM, quiting\n", + priv->port, dev->dev_addr); + err = -EINVAL; + goto out; + } } memcpy(priv->prev_mac, dev->dev_addr, sizeof(priv->prev_mac)); -- cgit v1.2.3 From c418253f12c0a95c7cd894953644c7488899c9fd Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Tue, 4 Jun 2013 05:13:29 +0000 Subject: net/mlx4_core: Keep VF assigned MAC in the PF admin table MAC addresses assigned by the PF to VFs were not kept in the PF driver admin table. As a result, displaying the VF MACs from the PF interface to user space showed zero address where in fact the VF got non-zero address from the PF, fix that. Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/fw.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c index 58a8e535d698..2c97901c6a6d 100644 --- a/drivers/net/ethernet/mellanox/mlx4/fw.c +++ b/drivers/net/ethernet/mellanox/mlx4/fw.c @@ -840,12 +840,16 @@ int mlx4_QUERY_PORT_wrapper(struct mlx4_dev *dev, int slave, MLX4_CMD_NATIVE); if (!err && dev->caps.function != slave) { - /* set slave default_mac address */ - MLX4_GET(def_mac, outbox->buf, QUERY_PORT_MAC_OFFSET); - def_mac += slave << 8; /* if config MAC in DB use it */ if (priv->mfunc.master.vf_oper[slave].vport[vhcr->in_modifier].state.mac) def_mac = priv->mfunc.master.vf_oper[slave].vport[vhcr->in_modifier].state.mac; + else { + /* set slave default_mac address */ + MLX4_GET(def_mac, outbox->buf, QUERY_PORT_MAC_OFFSET); + def_mac += slave << 8; + priv->mfunc.master.vf_admin[slave].vport[vhcr->in_modifier].mac = def_mac; + } + MLX4_PUT(outbox->buf, def_mac, QUERY_PORT_MAC_OFFSET); /* get port type - currently only eth is enabled */ -- cgit v1.2.3 From e768fb292d362ff2742d843e346a10853bde68be Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Sun, 2 Jun 2013 23:28:41 +0000 Subject: bnx2x: fix TCP offload for tunneling ipv4 over ipv6 FW was initialized with data from wrong header, this caused TSO packets have wrong IP csum. Signed-off-by: Dmitry Kravkov Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index be59ec4b2c30..e3fe1ce41522 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -3192,11 +3192,11 @@ static u32 bnx2x_xmit_type(struct bnx2x *bp, struct sk_buff *skb) rc |= XMIT_CSUM_TCP; if (skb_is_gso_v6(skb)) { - rc |= (XMIT_GSO_V6 | XMIT_CSUM_TCP | XMIT_CSUM_V6); + rc |= (XMIT_GSO_V6 | XMIT_CSUM_TCP); if (rc & XMIT_CSUM_ENC) rc |= XMIT_GSO_ENC_V6; } else if (skb_is_gso(skb)) { - rc |= (XMIT_GSO_V4 | XMIT_CSUM_V4 | XMIT_CSUM_TCP); + rc |= (XMIT_GSO_V4 | XMIT_CSUM_TCP); if (rc & XMIT_CSUM_ENC) rc |= XMIT_GSO_ENC_V4; } @@ -3483,19 +3483,18 @@ static void bnx2x_update_pbds_gso_enc(struct sk_buff *skb, { u16 hlen_w = 0; u8 outerip_off, outerip_len = 0; + /* from outer IP to transport */ hlen_w = (skb_inner_transport_header(skb) - skb_network_header(skb)) >> 1; /* transport len */ - if (xmit_type & XMIT_CSUM_TCP) - hlen_w += inner_tcp_hdrlen(skb) >> 1; - else - hlen_w += sizeof(struct udphdr) >> 1; + hlen_w += inner_tcp_hdrlen(skb) >> 1; pbd2->fw_ip_hdr_to_payload_w = hlen_w; - if (xmit_type & XMIT_CSUM_ENC_V4) { + /* outer IP header info */ + if (xmit_type & XMIT_CSUM_V4) { struct iphdr *iph = ip_hdr(skb); pbd2->fw_ip_csum_wo_len_flags_frag = bswab16(csum_fold((~iph->check) - -- cgit v1.2.3 From ff5b2fabf53426c15a5f041505687f94d1b2109f Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 3 Jun 2013 00:38:39 +0000 Subject: net: fec: add fallback to random MAC address If no valid MAC address could be obtained from the hardware, fall back to a randomly generated one. Signed-off-by: Pavel Machek Signed-off-by: Lucas Stach Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_main.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 85a06037b242..a667015be22a 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -1038,6 +1038,18 @@ static void fec_get_mac(struct net_device *ndev) iap = &tmpaddr[0]; } + /* + * 5) random mac address + */ + if (!is_valid_ether_addr(iap)) { + /* Report it and use a random ethernet address instead */ + netdev_err(ndev, "Invalid MAC address: %pM\n", iap); + eth_hw_addr_random(ndev); + netdev_info(ndev, "Using random MAC address: %pM\n", + ndev->dev_addr); + return; + } + memcpy(ndev->dev_addr, iap, ETH_ALEN); /* Adjust MAC if using macaddr */ -- cgit v1.2.3 From 44dbc78ee43d5df0bbcd7f3ae6a0ba00ed261e95 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Mon, 3 Jun 2013 02:59:57 +0000 Subject: bnx2x: Fix bridged GSO for 57710/57711 chips It was recently found out that GSO on 57710/57711 was broken, due to packets being sent without a valid IP checksum. Commit 057cf65 "bnx2x: Fix GSO for 57710/57711 chips" partially fixed this issue, but failed to set the correct IP checksum when receiving GSO packets via bridges, as such packets enter bnx2x_tx_split() and the FW flags needed to calculate IP checksum were erroneously set in the incorrect buffer descriptor. This patch re-enables GSO in said scenario for 57710/57711 chips. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index e3fe1ce41522..638e55435b04 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -3817,8 +3817,7 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) bnx2x_set_pbd_gso_e2(skb, &pbd_e2_parsing_data, xmit_type); else - bnx2x_set_pbd_gso(skb, pbd_e1x, tx_start_bd, - xmit_type); + bnx2x_set_pbd_gso(skb, pbd_e1x, first_bd, xmit_type); } /* Set the PBD's parsing_data field if not zero -- cgit v1.2.3 From 3a5395b3d57b9e3836c755434c88f4590d5ea6f6 Mon Sep 17 00:00:00 2001 From: "Jens Renner \\(EFE\\)" Date: Mon, 3 Jun 2013 04:32:52 +0000 Subject: net: ethernet: xilinx_emaclite: set protocol selector bits when writing ANAR This patch sets the protocol selector bits (4:0) of the PHY's MII_ADVERTISE register (ANAR) when writing ADVERTISE_ALL. The protocol selector bits are indicating IEEE 803.3u support and are fixed / read-only on some PHYs. Not setting them correctly on others (like TI DP83630) makes the PHY fall back to 10M HDX mode which should be avoided. Tested for TI DP83630 PHY on Microblaze platform. Signed-off-by: Jens Renner Tested-by: Michal Simek Signed-off-by: David S. Miller --- drivers/net/ethernet/xilinx/xilinx_emaclite.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c index 919b983114e9..b7268b3dae77 100644 --- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c +++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c @@ -946,7 +946,8 @@ static int xemaclite_open(struct net_device *dev) phy_write(lp->phy_dev, MII_CTRL1000, 0); /* Advertise only 10 and 100mbps full/half duplex speeds */ - phy_write(lp->phy_dev, MII_ADVERTISE, ADVERTISE_ALL); + phy_write(lp->phy_dev, MII_ADVERTISE, ADVERTISE_ALL | + ADVERTISE_CSMA); /* Restart auto negotiation */ bmcr = phy_read(lp->phy_dev, MII_BMCR); -- cgit v1.2.3 From 9bc297ea0622bb2a6b3abfa2fa84f0a3b86ef8c8 Mon Sep 17 00:00:00 2001 From: Nithin Sujir Date: Mon, 3 Jun 2013 09:19:34 +0000 Subject: tg3: Add read dma workaround for 5720 Commit 091f0ea30074bc43f9250961b3247af713024bc6 "tg3: Add New 5719 Read DMA workaround" added a workaround for TX DMA stall on the 5719. This workaround needs to be applied to the 5720 as well. Cc: stable@vger.kernel.org Reported-by: Roland Dreier Tested-by: Roland Dreier Signed-off-by: Nithin Nayak Sujir Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 21 +++++++++++++++------ drivers/net/ethernet/broadcom/tg3.h | 5 +++-- 2 files changed, 18 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 1f2dd928888a..0f493c8dc28b 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -9468,6 +9468,14 @@ static void tg3_rss_write_indir_tbl(struct tg3 *tp) } } +static inline u32 tg3_lso_rd_dma_workaround_bit(struct tg3 *tp) +{ + if (tg3_asic_rev(tp) == ASIC_REV_5719) + return TG3_LSO_RD_DMA_TX_LENGTH_WA_5719; + else + return TG3_LSO_RD_DMA_TX_LENGTH_WA_5720; +} + /* tp->lock is held. */ static int tg3_reset_hw(struct tg3 *tp, bool reset_phy) { @@ -10153,16 +10161,17 @@ static int tg3_reset_hw(struct tg3 *tp, bool reset_phy) tw32_f(RDMAC_MODE, rdmac_mode); udelay(40); - if (tg3_asic_rev(tp) == ASIC_REV_5719) { + if (tg3_asic_rev(tp) == ASIC_REV_5719 || + tg3_asic_rev(tp) == ASIC_REV_5720) { for (i = 0; i < TG3_NUM_RDMA_CHANNELS; i++) { if (tr32(TG3_RDMA_LENGTH + (i << 2)) > TG3_MAX_MTU(tp)) break; } if (i < TG3_NUM_RDMA_CHANNELS) { val = tr32(TG3_LSO_RD_DMA_CRPTEN_CTRL); - val |= TG3_LSO_RD_DMA_TX_LENGTH_WA; + val |= tg3_lso_rd_dma_workaround_bit(tp); tw32(TG3_LSO_RD_DMA_CRPTEN_CTRL, val); - tg3_flag_set(tp, 5719_RDMA_BUG); + tg3_flag_set(tp, 5719_5720_RDMA_BUG); } } @@ -10526,15 +10535,15 @@ static void tg3_periodic_fetch_stats(struct tg3 *tp) TG3_STAT_ADD32(&sp->tx_ucast_packets, MAC_TX_STATS_UCAST); TG3_STAT_ADD32(&sp->tx_mcast_packets, MAC_TX_STATS_MCAST); TG3_STAT_ADD32(&sp->tx_bcast_packets, MAC_TX_STATS_BCAST); - if (unlikely(tg3_flag(tp, 5719_RDMA_BUG) && + if (unlikely(tg3_flag(tp, 5719_5720_RDMA_BUG) && (sp->tx_ucast_packets.low + sp->tx_mcast_packets.low + sp->tx_bcast_packets.low) > TG3_NUM_RDMA_CHANNELS)) { u32 val; val = tr32(TG3_LSO_RD_DMA_CRPTEN_CTRL); - val &= ~TG3_LSO_RD_DMA_TX_LENGTH_WA; + val &= ~tg3_lso_rd_dma_workaround_bit(tp); tw32(TG3_LSO_RD_DMA_CRPTEN_CTRL, val); - tg3_flag_clear(tp, 5719_RDMA_BUG); + tg3_flag_clear(tp, 5719_5720_RDMA_BUG); } TG3_STAT_ADD32(&sp->rx_octets, MAC_RX_STATS_OCTETS); diff --git a/drivers/net/ethernet/broadcom/tg3.h b/drivers/net/ethernet/broadcom/tg3.h index 9b2d3ac2474a..ff6e30eeae35 100644 --- a/drivers/net/ethernet/broadcom/tg3.h +++ b/drivers/net/ethernet/broadcom/tg3.h @@ -1422,7 +1422,8 @@ #define TG3_LSO_RD_DMA_CRPTEN_CTRL 0x00004910 #define TG3_LSO_RD_DMA_CRPTEN_CTRL_BLEN_BD_4K 0x00030000 #define TG3_LSO_RD_DMA_CRPTEN_CTRL_BLEN_LSO_4K 0x000c0000 -#define TG3_LSO_RD_DMA_TX_LENGTH_WA 0x02000000 +#define TG3_LSO_RD_DMA_TX_LENGTH_WA_5719 0x02000000 +#define TG3_LSO_RD_DMA_TX_LENGTH_WA_5720 0x00200000 /* 0x4914 --> 0x4be0 unused */ #define TG3_NUM_RDMA_CHANNELS 4 @@ -3059,7 +3060,7 @@ enum TG3_FLAGS { TG3_FLAG_APE_HAS_NCSI, TG3_FLAG_TX_TSTAMP_EN, TG3_FLAG_4K_FIFO_LIMIT, - TG3_FLAG_5719_RDMA_BUG, + TG3_FLAG_5719_5720_RDMA_BUG, TG3_FLAG_RESET_TASK_PENDING, TG3_FLAG_PTP_CAPABLE, TG3_FLAG_5705_PLUS, -- cgit v1.2.3