From f1f8c6cbe6f08f93ac2a4ca19625891d8a82b7f8 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Mon, 18 Oct 2010 15:00:18 +0200 Subject: can: mcp251x: Don't use pdata->model for chip selection anymore Since commit e446630c960946b5c1762e4eadb618becef599e7, i.e. v2.6.35-rc1, the mcp251x chip model can be selected via the modalias member in the struct spi_board_info. The driver stores the actual model in the struct mcp251x_platform_data. From the driver point of view the platform_data should be read only. Since all in-tree users of the mcp251x have already been converted to the modalias method, this patch moves the "model" member from the struct mcp251x_platform_data to the driver's private data structure. Signed-off-by: Marc Kleine-Budde Cc: Christian Pellegrin Cc: Marc Zyngier --- drivers/net/can/mcp251x.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c index f5e2edd09ce4..0386bed43551 100644 --- a/drivers/net/can/mcp251x.c +++ b/drivers/net/can/mcp251x.c @@ -38,14 +38,14 @@ * static struct mcp251x_platform_data mcp251x_info = { * .oscillator_frequency = 8000000, * .board_specific_setup = &mcp251x_setup, - * .model = CAN_MCP251X_MCP2510, * .power_enable = mcp251x_power_enable, * .transceiver_enable = NULL, * }; * * static struct spi_board_info spi_board_info[] = { * { - * .modalias = "mcp251x", + * .modalias = "mcp2510", + * // or "mcp2515" depending on your controller * .platform_data = &mcp251x_info, * .irq = IRQ_EINT13, * .max_speed_hz = 2*1000*1000, @@ -224,10 +224,16 @@ static struct can_bittiming_const mcp251x_bittiming_const = { .brp_inc = 1, }; +enum mcp251x_model { + CAN_MCP251X_MCP2510 = 0x2510, + CAN_MCP251X_MCP2515 = 0x2515, +}; + struct mcp251x_priv { struct can_priv can; struct net_device *net; struct spi_device *spi; + enum mcp251x_model model; struct mutex mcp_lock; /* SPI device lock */ @@ -362,10 +368,9 @@ static void mcp251x_write_bits(struct spi_device *spi, u8 reg, static void mcp251x_hw_tx_frame(struct spi_device *spi, u8 *buf, int len, int tx_buf_idx) { - struct mcp251x_platform_data *pdata = spi->dev.platform_data; struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev); - if (pdata->model == CAN_MCP251X_MCP2510) { + if (priv->model == CAN_MCP251X_MCP2510) { int i; for (i = 1; i < TXBDAT_OFF + len; i++) @@ -408,9 +413,8 @@ static void mcp251x_hw_rx_frame(struct spi_device *spi, u8 *buf, int buf_idx) { struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev); - struct mcp251x_platform_data *pdata = spi->dev.platform_data; - if (pdata->model == CAN_MCP251X_MCP2510) { + if (priv->model == CAN_MCP251X_MCP2510) { int i, len; for (i = 1; i < RXBDAT_OFF; i++) @@ -951,16 +955,12 @@ static int __devinit mcp251x_can_probe(struct spi_device *spi) struct net_device *net; struct mcp251x_priv *priv; struct mcp251x_platform_data *pdata = spi->dev.platform_data; - int model = spi_get_device_id(spi)->driver_data; int ret = -ENODEV; if (!pdata) /* Platform data is required for osc freq */ goto error_out; - if (model) - pdata->model = model; - /* Allocate can/net device */ net = alloc_candev(sizeof(struct mcp251x_priv), TX_ECHO_SKB_MAX); if (!net) { @@ -977,6 +977,7 @@ static int __devinit mcp251x_can_probe(struct spi_device *spi) priv->can.clock.freq = pdata->oscillator_frequency / 2; priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES | CAN_CTRLMODE_LOOPBACK | CAN_CTRLMODE_LISTENONLY; + priv->model = spi_get_device_id(spi)->driver_data; priv->net = net; dev_set_drvdata(&spi->dev, priv); @@ -1150,8 +1151,7 @@ static int mcp251x_can_resume(struct spi_device *spi) #define mcp251x_can_resume NULL #endif -static struct spi_device_id mcp251x_id_table[] = { - { "mcp251x", 0 /* Use pdata.model */ }, +static const struct spi_device_id mcp251x_id_table[] = { { "mcp2510", CAN_MCP251X_MCP2510 }, { "mcp2515", CAN_MCP251X_MCP2515 }, { }, -- cgit v1.2.3