From a555f810af6d63ea5960abaed88e150ad95c3011 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Thu, 28 Jan 2010 16:18:15 -0500 Subject: Btrfs: Add mount -o compress-force The default btrfs mount -o compress mode will quickly back off compressing a file if it notices that compression does not reduce the size of the data being written. This can save considerable CPU because all future writes to the file go through uncompressed. But some files are both very large and have mixed data stored in them. In that case, we want to add the ability to always try compressing data before writing it. This commit adds mount -o compress-force. A later commit will add a new inode flag that does the same thing. Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'fs/btrfs/inode.c') diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index b330e27c2d8b..f46c57276844 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -483,7 +483,8 @@ again: nr_pages_ret = 0; /* flag the file so we don't compress in the future */ - BTRFS_I(inode)->flags |= BTRFS_INODE_NOCOMPRESS; + if (!btrfs_test_opt(root, FORCE_COMPRESS)) + BTRFS_I(inode)->flags |= BTRFS_INODE_NOCOMPRESS; } if (will_compress) { *num_added += 1; -- cgit v1.2.3 From d1ea6a61454e7d7ff0873d0ad1ae27d5807da0d3 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Wed, 20 Jan 2010 07:28:54 +0000 Subject: Btrfs: Use correct values when updating inode i_size on fallocate commit f2bc9dd07e3424c4ec5f3949961fe053d47bc825 Author: Aneesh Kumar K.V Date: Wed Jan 20 12:57:53 2010 +0530 Btrfs: Use correct values when updating inode i_size on fallocate Even though we allocate more, we should be updating inode i_size as per the arguments passed Signed-off-by: Aneesh Kumar K.V Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'fs/btrfs/inode.c') diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index f46c57276844..5606361b5f04 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -5800,7 +5800,7 @@ out_fail: } static int prealloc_file_range(struct inode *inode, u64 start, u64 end, - u64 alloc_hint, int mode) + u64 alloc_hint, int mode, loff_t actual_len) { struct btrfs_trans_handle *trans; struct btrfs_root *root = BTRFS_I(inode)->root; @@ -5809,6 +5809,7 @@ static int prealloc_file_range(struct inode *inode, u64 start, u64 end, u64 cur_offset = start; u64 num_bytes = end - start; int ret = 0; + u64 i_size; while (num_bytes > 0) { alloc_size = min(num_bytes, root->fs_info->max_extent); @@ -5847,8 +5848,12 @@ static int prealloc_file_range(struct inode *inode, u64 start, u64 end, BTRFS_I(inode)->flags |= BTRFS_INODE_PREALLOC; if (!(mode & FALLOC_FL_KEEP_SIZE) && cur_offset > inode->i_size) { - i_size_write(inode, cur_offset); - btrfs_ordered_update_i_size(inode, cur_offset, NULL); + if (cur_offset > actual_len) + i_size = actual_len; + else + i_size = cur_offset; + i_size_write(inode, i_size); + btrfs_ordered_update_i_size(inode, i_size, NULL); } ret = btrfs_update_inode(trans, root, inode); @@ -5941,7 +5946,7 @@ static long btrfs_fallocate(struct inode *inode, int mode, !test_bit(EXTENT_FLAG_PREALLOC, &em->flags))) { ret = prealloc_file_range(inode, cur_offset, last_byte, - alloc_hint, mode); + alloc_hint, mode, offset+len); if (ret < 0) { free_extent_map(em); break; -- cgit v1.2.3 From e3acc2a6850efff647f1c5458524eb3a8bcba20a Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 26 Jan 2010 14:30:53 +0000 Subject: Btrfs: run orphan cleanup on default fs root This patch revert's commit 6c090a11e1c403b727a6a8eff0b97d5fb9e95cb5 Since it introduces this problem where we can run orphan cleanup on a volume that can have orphan entries re-added. Instead of my original fix, Yan Zheng pointed out that we can just revert my original fix and then run the orphan cleanup in open_ctree after we look up the fs_root. I have tested this with all the tests that gave me problems and this patch fixes both problems. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/disk-io.c | 6 ++++++ fs/btrfs/inode.c | 6 ------ 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'fs/btrfs/inode.c') diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 009e3bd18f23..87b25543d7d1 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1993,6 +1993,12 @@ struct btrfs_root *open_ctree(struct super_block *sb, if (!fs_info->fs_root) goto fail_trans_kthread; + if (!(sb->s_flags & MS_RDONLY)) { + down_read(&fs_info->cleanup_work_sem); + btrfs_orphan_cleanup(fs_info->fs_root); + up_read(&fs_info->cleanup_work_sem); + } + return tree_root; fail_trans_kthread: diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 5606361b5f04..8cd109972fa6 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -3797,12 +3797,6 @@ struct inode *btrfs_lookup_dentry(struct inode *dir, struct dentry *dentry) if (location.type == BTRFS_INODE_ITEM_KEY) { inode = btrfs_iget(dir->i_sb, &location, root); - if (unlikely(root->clean_orphans) && - !(inode->i_sb->s_flags & MS_RDONLY)) { - down_read(&root->fs_info->cleanup_work_sem); - btrfs_orphan_cleanup(root); - up_read(&root->fs_info->cleanup_work_sem); - } return inode; } -- cgit v1.2.3 From efd049fb26a162c3830fd3cb1001fdc09b147f3b Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 2 Feb 2010 20:50:10 +0000 Subject: Btrfs: do not try and lookup the file extent when finishing ordered io When running the following fio job [torrent] filename=torrent-test rw=randwrite size=4g filesize=4g bs=4k ioengine=sync you would see long stalls where no work was being done. That is because we were doing all this extra work to read in the file extent outside of the transaction, however in the random io case this ends up hurting us because the file extents are not there to begin with. So axe this logic, since we end up reading in the file extent when we go to update it anyway. This took the fio job from 11 mb/s with several ~10 second stalls to 24 mb/s to a couple of 1-2 second stalls. Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 46 ++-------------------------------------------- 1 file changed, 2 insertions(+), 44 deletions(-) (limited to 'fs/btrfs/inode.c') diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 8cd109972fa6..6782aa19130d 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -1681,24 +1681,6 @@ static int insert_reserved_file_extent(struct btrfs_trans_handle *trans, * before we start the transaction. It limits the amount of btree * reads required while inside the transaction. */ -static noinline void reada_csum(struct btrfs_root *root, - struct btrfs_path *path, - struct btrfs_ordered_extent *ordered_extent) -{ - struct btrfs_ordered_sum *sum; - u64 bytenr; - - sum = list_entry(ordered_extent->list.next, struct btrfs_ordered_sum, - list); - bytenr = sum->sums[0].bytenr; - - /* - * we don't care about the results, the point of this search is - * just to get the btree leaves into ram - */ - btrfs_lookup_csum(NULL, root->fs_info->csum_root, path, bytenr, 0); -} - /* as ordered data IO finishes, this gets called so we can finish * an ordered extent if the range of bytes in the file it covers are * fully written. @@ -1709,7 +1691,6 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end) struct btrfs_trans_handle *trans; struct btrfs_ordered_extent *ordered_extent = NULL; struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree; - struct btrfs_path *path; int compressed = 0; int ret; @@ -1717,32 +1698,9 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end) if (!ret) return 0; - /* - * before we join the transaction, try to do some of our IO. - * This will limit the amount of IO that we have to do with - * the transaction running. We're unlikely to need to do any - * IO if the file extents are new, the disk_i_size checks - * covers the most common case. - */ - if (start < BTRFS_I(inode)->disk_i_size) { - path = btrfs_alloc_path(); - if (path) { - ret = btrfs_lookup_file_extent(NULL, root, path, - inode->i_ino, - start, 0); - ordered_extent = btrfs_lookup_ordered_extent(inode, - start); - if (!list_empty(&ordered_extent->list)) { - btrfs_release_path(root, path); - reada_csum(root, path, ordered_extent); - } - btrfs_free_path(path); - } - } - - if (!ordered_extent) - ordered_extent = btrfs_lookup_ordered_extent(inode, start); + ordered_extent = btrfs_lookup_ordered_extent(inode, start); BUG_ON(!ordered_extent); + if (test_bit(BTRFS_ORDERED_NOCOW, &ordered_extent->flags)) { BUG_ON(!list_empty(&ordered_extent->list)); ret = btrfs_ordered_update_i_size(inode, 0, ordered_extent); -- cgit v1.2.3 From 23b5c50945f2294add0137799400329c0ebba290 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Thu, 4 Feb 2010 11:33:03 -0500 Subject: Btrfs: apply updated fallocate i_size fix This version of the i_size fix for fallocate makes sure we only update the i_size when the current fallocate is really operating outside of i_size. Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'fs/btrfs/inode.c') diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 6782aa19130d..4deb280f8969 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -5799,7 +5799,9 @@ static int prealloc_file_range(struct inode *inode, u64 start, u64 end, inode->i_ctime = CURRENT_TIME; BTRFS_I(inode)->flags |= BTRFS_INODE_PREALLOC; if (!(mode & FALLOC_FL_KEEP_SIZE) && - cur_offset > inode->i_size) { + (actual_len > inode->i_size) && + (cur_offset > inode->i_size)) { + if (cur_offset > actual_len) i_size = actual_len; else -- cgit v1.2.3