From cbb7d8f9b7b0a9f51c9869d0da63ea75a2c95caf Mon Sep 17 00:00:00 2001 From: James Courtier-Dutton Date: Wed, 13 Dec 2006 11:21:55 +0000 Subject: [ALSA] emu10k1: Update registers defines for the Audigy 2/emu10k2.5 Signed-off-by: James Courtier-Dutton Signed-off-by: Jaroslav Kysela --- include/sound/emu10k1.h | 63 ++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 55 insertions(+), 8 deletions(-) (limited to 'include/sound/emu10k1.h') diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h index 32ce4bd31b46..adca71b20daa 100644 --- a/include/sound/emu10k1.h +++ b/include/sound/emu10k1.h @@ -460,6 +460,7 @@ #define FXRT_CHANNELC 0x0f000000 /* Effects send bus number for channel's effects send C */ #define FXRT_CHANNELD 0xf0000000 /* Effects send bus number for channel's effects send D */ +#define A_HR 0x0b /* High Resolution. 24bit playback from host to DSP. */ #define MAPA 0x0c /* Cache map A */ #define MAPB 0x0d /* Cache map B */ @@ -467,6 +468,8 @@ #define MAP_PTE_MASK 0xffffe000 /* The 19 MSBs of the PTE indexed by the PTI */ #define MAP_PTI_MASK 0x00001fff /* The 13 bit index to one of the 8192 PTE dwords */ +/* 0x0e, 0x0f: Not used */ + #define ENVVOL 0x10 /* Volume envelope register */ #define ENVVOL_MASK 0x0000ffff /* Current value of volume envelope state variable */ /* 0x8000-n == 666*n usec delay */ @@ -555,7 +558,7 @@ /* NOTE: All channels contain internal variables; do */ /* not write to these locations. */ -/* 1f something */ +/* 0x1f: not used */ #define CD0 0x20 /* Cache data 0 register */ #define CD1 0x21 /* Cache data 1 register */ @@ -625,6 +628,8 @@ #define FXWC_SPDIFLEFT (1<<22) /* 0x00400000 */ #define FXWC_SPDIFRIGHT (1<<23) /* 0x00800000 */ +#define A_TBLSZ ` 0x43 /* Effects Tank Internal Table Size. Only low byte or register used */ + #define TCBS 0x44 /* Tank cache buffer size register */ #define TCBS_MASK 0x00000007 /* Tank cache buffer size field */ #define TCBS_BUFFSIZE_16K 0x00000000 @@ -645,7 +650,7 @@ #define FXBA 0x47 /* FX Buffer Address */ #define FXBA_MASK 0xfffff000 /* 20 bit base address */ -/* 0x48 something - word access, defaults to 3f */ +#define A_HWM 0x48 /* High PCI Water Mark - word access, defaults to 3f */ #define MICBS 0x49 /* Microphone buffer size register */ @@ -689,6 +694,18 @@ #define ADCBS_BUFSIZE_57344 0x0000001e #define ADCBS_BUFSIZE_65536 0x0000001f +/* Current Send B, A Amounts */ +#define A_CSBA 0x4c + +/* Current Send D, C Amounts */ +#define A_CSDC 0x4d + +/* Current Send F, E Amounts */ +#define A_CSFE 0x4e + +/* Current Send H, G Amounts */ +#define A_CSHG 0x4f + #define CDCS 0x50 /* CD-ROM digital channel status register */ @@ -696,6 +713,9 @@ #define DBG 0x52 /* DO NOT PROGRAM THIS REGISTER!!! MAY DESTROY CHIP */ +/* S/PDIF Input C Channel Status */ +#define A_SPSC 0x52 + #define REG53 0x53 /* DO NOT PROGRAM THIS REGISTER!!! MAY DESTROY CHIP */ #define A_DBG 0x53 @@ -736,6 +756,8 @@ #define SPCS_NOTAUDIODATA 0x00000002 /* 0 = Digital audio, 1 = not audio */ #define SPCS_PROFESSIONAL 0x00000001 /* 0 = Consumer (IEC-958), 1 = pro (AES3-1992) */ +/* 0x57: Not used */ + /* The 32-bit CLIx and SOLx registers all have one bit per channel control/status */ #define CLIEL 0x58 /* Channel loop interrupt enable low register */ @@ -761,6 +783,9 @@ #define AC97SLOT_CNTR 0x10 /* Center enable */ #define AC97SLOT_LFE 0x20 /* LFE enable */ +/* PCB Revision */ +#define A_PCB 0x5f + // NOTE: 0x60,61,62: 64-bit #define CDSRCS 0x60 /* CD-ROM Sample Rate Converter status register */ @@ -808,9 +833,18 @@ #define HLIPH 0x69 /* Channel half loop interrupt pending high register */ -// 0x6a,6b,6c used for some recording -// 0x6d unused -// 0x6e,6f - tanktable base / offset +/* S/PDIF Host Record Index (bypasses SRC) */ +#define A_SPRI 0x6a +/* S/PDIF Host Record Address */ +#define A_SPRA 0x6b +/* S/PDIF Host Record Control */ +#define A_SPRC 0x6c +/* Delayed Interrupt Counter & Enable */ +#define A_DICE 0x6d +/* Tank Table Base */ +#define A_TTB 0x6e +/* Tank Delay Offset */ +#define A_TDOF 0x6f /* This is the MPU port on the card (via the game port) */ #define A_MUDATA1 0x70 @@ -828,6 +862,7 @@ #define A_FXWC1 0x74 /* Selects 0x7f-0x60 for FX recording */ #define A_FXWC2 0x75 /* Selects 0x9f-0x80 for FX recording */ +/* Extended Hardware Control */ #define A_SPDIF_SAMPLERATE 0x76 /* Set the sample rate of SPDIF output */ #define A_SAMPLE_RATE 0x76 /* Various sample rate settings. */ #define A_SAMPLE_RATE_NOT_USED 0x0ffc111e /* Bits that are not used and cannot be set. */ @@ -850,8 +885,20 @@ #define A_PCM_96000 0x00004000 #define A_PCM_44100 0x00008000 -/* 0x77,0x78,0x79 "something i2s-related" - default to 0x01080000 on my audigy 2 ZS --rlrevell */ -/* 0x7a, 0x7b - lookup tables */ +/* I2S0 Sample Rate Tracker Status */ +#define A_SRT3 0x77 + +/* I2S1 Sample Rate Tracker Status */ +#define A_SRT4 0x78 + +/* I2S2 Sample Rate Tracker Status */ +#define A_SRT5 0x79 +/* - default to 0x01080000 on my audigy 2 ZS --rlrevell */ + +/* Tank Table DMA Address */ +#define A_TTDA 0x7a +/* Tank Table DMA Data */ +#define A_TTDD 0x7b #define A_FXRT2 0x7c #define A_FXRT_CHANNELE 0x0000003f /* Effects send bus number for channel's effects send E */ @@ -873,7 +920,7 @@ #define A_FXRT_CHANNELC 0x003f0000 #define A_FXRT_CHANNELD 0x3f000000 - +/* 0x7f: Not used */ /* Each FX general purpose register is 32 bits in length, all bits are used */ #define FXGPREGBASE 0x100 /* FX general purpose registers base */ #define A_FXGPREGBASE 0x400 /* Audigy GPRs, 0x400 to 0x5ff */ -- cgit v1.2.3