From 78f22b6a3a9254460d23060530b48ae02a9394e3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 24 Mar 2014 17:57:27 +0100 Subject: cfg80211: allow userspace to take ownership of interfaces When dynamically creating interfaces from userspace, e.g. for P2P usage, such interfaces are usually owned by the process that created them, i.e. wpa_supplicant. Should wpa_supplicant crash, such interfaces will often cease operating properly and cause problems on restarting the process. To avoid this problem, introduce an ownership concept for interfaces. If an interface is owned by a netlink socket, then it will be destroyed if the netlink socket is closed for any reason, including if the process it belongs to crashed. This gives us a race-free way to get rid of any such interfaces. Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 1ba9d626aa83..5e405fd55a71 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1579,6 +1579,10 @@ enum nl80211_commands { * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32. * As specified in the &enum nl80211_tdls_peer_capability. * + * @NL80211_ATTR_IFACE_SOCKET_OWNER: flag attribute, if set during interface + * creation then the new interface will be owned by the netlink socket + * that created it and will be destroyed when the socket is closed + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1914,6 +1918,8 @@ enum nl80211_attrs { NL80211_ATTR_TDLS_PEER_CAPABILITY, + NL80211_ATTR_IFACE_SOCKET_OWNER, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3 From 570dbde137d4604e4e682a5855b4425233344c19 Mon Sep 17 00:00:00 2001 From: David Spinadel Date: Sun, 23 Feb 2014 09:12:59 +0200 Subject: cfg80211: Add indoor only and GO concurrent channel attributes The FCC are clarifying some soft configuration requirements, which among other include the following: 1. Indoor operation, where a device can use channels requiring indoor operation, subject to that it can guarantee indoor operation, i.e., the device is connected to AC Power or the device is under the control of a local master that is acting as an AP and is connected to AC Power. 2. Concurrent GO operation, where devices may instantiate a P2P GO while they are under the guidance of an authorized master. For example, on a channel on which a BSS is connected to an authorized master, i.e., with DFS and radar detection capability in the UNII band. See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122 Add support for advertising Indoor-only and GO-Concurrent channel properties. Signed-off-by: David Spinadel Signed-off-by: Ilan Peer Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 5 +++++ include/uapi/linux/nl80211.h | 23 +++++++++++++++++++++++ net/wireless/nl80211.c | 6 ++++++ net/wireless/reg.c | 2 ++ 4 files changed, 36 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 6510ccf53a54..14d8d3417735 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -109,6 +109,9 @@ enum ieee80211_band { * channel as the control or any of the secondary channels. * This may be due to the driver or due to regulatory bandwidth * restrictions. + * @IEEE80211_CHAN_INDOOR_ONLY: see %NL80211_FREQUENCY_ATTR_INDOOR_ONLY + * @IEEE80211_CHAN_GO_CONCURRENT: see %NL80211_FREQUENCY_ATTR_GO_CONCURRENT + * */ enum ieee80211_channel_flags { IEEE80211_CHAN_DISABLED = 1<<0, @@ -120,6 +123,8 @@ enum ieee80211_channel_flags { IEEE80211_CHAN_NO_OFDM = 1<<6, IEEE80211_CHAN_NO_80MHZ = 1<<7, IEEE80211_CHAN_NO_160MHZ = 1<<8, + IEEE80211_CHAN_INDOOR_ONLY = 1<<9, + IEEE80211_CHAN_GO_CONCURRENT = 1<<10, }; #define IEEE80211_CHAN_NO_HT40 \ diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 5e405fd55a71..ac5b2d25f0fc 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2342,9 +2342,30 @@ enum nl80211_band_attr { * using this channel as the primary or any of the secondary channels * isn't possible * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. + * @NL80211_FREQUENCY_ATTR_INDOOR_ONLY: Only indoor use is permitted on this + * channel. A channel that has the INDOOR_ONLY attribute can only be + * used when there is a clear assessment that the device is operating in + * an indoor surroundings, i.e., it is connected to AC power (and not + * through portable DC inverters) or is under the control of a master + * that is acting as an AP and is connected to AC power. + * @NL80211_FREQUENCY_ATTR_GO_CONCURRENT: GO operation is allowed on this + * channel if it's connected concurrently to a BSS on the same channel on + * the 2 GHz band or to a channel in the same UNII band (on the 5 GHz + * band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO on a + * channel that has the GO_CONCURRENT attribute set can be done when there + * is a clear assessment that the device is operating under the guidance of + * an authorized master, i.e., setting up a GO while the device is also + * connected to an AP with DFS and radar detection on the UNII band (it is + * up to user-space, i.e., wpa_supplicant to perform the required + * verifications) * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use + * + * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122 + * for more information on the FCC description of the relaxations allowed + * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and + * NL80211_FREQUENCY_ATTR_GO_CONCURRENT. */ enum nl80211_frequency_attr { __NL80211_FREQUENCY_ATTR_INVALID, @@ -2361,6 +2382,8 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_NO_80MHZ, NL80211_FREQUENCY_ATTR_NO_160MHZ, NL80211_FREQUENCY_ATTR_DFS_CAC_TIME, + NL80211_FREQUENCY_ATTR_INDOOR_ONLY, + NL80211_FREQUENCY_ATTR_GO_CONCURRENT, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index b25b5ce4076d..c5ead18ad3ab 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -614,6 +614,12 @@ static int nl80211_msg_put_channel(struct sk_buff *msg, if ((chan->flags & IEEE80211_CHAN_NO_160MHZ) && nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_160MHZ)) goto nla_put_failure; + if ((chan->flags & IEEE80211_CHAN_INDOOR_ONLY) && + nla_put_flag(msg, NL80211_FREQUENCY_ATTR_INDOOR_ONLY)) + goto nla_put_failure; + if ((chan->flags & IEEE80211_CHAN_GO_CONCURRENT) && + nla_put_flag(msg, NL80211_FREQUENCY_ATTR_GO_CONCURRENT)) + goto nla_put_failure; } if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_MAX_TX_POWER, diff --git a/net/wireless/reg.c b/net/wireless/reg.c index e0a746d19061..1e9dc1cba335 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -873,6 +873,8 @@ static u32 map_regdom_flags(u32 rd_flags) channel_flags |= IEEE80211_CHAN_RADAR; if (rd_flags & NL80211_RRF_NO_OFDM) channel_flags |= IEEE80211_CHAN_NO_OFDM; + if (rd_flags & NL80211_RRF_NO_OUTDOOR) + channel_flags |= IEEE80211_CHAN_INDOOR_ONLY; return channel_flags; } -- cgit v1.2.3 From 52616f2b446eaad8eb2cd78bbd052f0066069757 Mon Sep 17 00:00:00 2001 From: Ilan Peer Date: Tue, 25 Feb 2014 16:26:00 +0200 Subject: cfg80211: Add an option to hint indoor operation Add the option to hint the wireless core that it is operating in an indoor environment. Signed-off-by: Ilan Peer Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 3 +++ net/wireless/nl80211.c | 18 ++++++-------- net/wireless/reg.c | 58 +++++++++++++++++++++++++++++++++++++++++++- net/wireless/reg.h | 1 + 4 files changed, 68 insertions(+), 12 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index ac5b2d25f0fc..513bfd7b2e5f 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2602,10 +2602,13 @@ enum nl80211_dfs_regions { * present has been registered with the wireless core that * has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a * supported feature. + * @NL80211_USER_REG_HINT_INDOOR: a user sent an hint indicating that the + * platform is operating in an indoor environment. */ enum nl80211_user_reg_hint_type { NL80211_USER_REG_HINT_USER = 0, NL80211_USER_REG_HINT_CELL_BASE = 1, + NL80211_USER_REG_HINT_INDOOR = 2, }; /** diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index b8d81e41b0f7..85bc830fd7e3 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -4677,7 +4677,6 @@ static int parse_reg_rule(struct nlattr *tb[], static int nl80211_req_set_reg(struct sk_buff *skb, struct genl_info *info) { - int r; char *data = NULL; enum nl80211_user_reg_hint_type user_reg_hint_type; @@ -4690,11 +4689,6 @@ static int nl80211_req_set_reg(struct sk_buff *skb, struct genl_info *info) if (unlikely(!rcu_access_pointer(cfg80211_regdomain))) return -EINPROGRESS; - if (!info->attrs[NL80211_ATTR_REG_ALPHA2]) - return -EINVAL; - - data = nla_data(info->attrs[NL80211_ATTR_REG_ALPHA2]); - if (info->attrs[NL80211_ATTR_USER_REG_HINT_TYPE]) user_reg_hint_type = nla_get_u32(info->attrs[NL80211_ATTR_USER_REG_HINT_TYPE]); @@ -4704,14 +4698,16 @@ static int nl80211_req_set_reg(struct sk_buff *skb, struct genl_info *info) switch (user_reg_hint_type) { case NL80211_USER_REG_HINT_USER: case NL80211_USER_REG_HINT_CELL_BASE: - break; + if (!info->attrs[NL80211_ATTR_REG_ALPHA2]) + return -EINVAL; + + data = nla_data(info->attrs[NL80211_ATTR_REG_ALPHA2]); + return regulatory_hint_user(data, user_reg_hint_type); + case NL80211_USER_REG_HINT_INDOOR: + return regulatory_hint_indoor_user(); default: return -EINVAL; } - - r = regulatory_hint_user(data, user_reg_hint_type); - - return r; } static int nl80211_get_mesh_config(struct sk_buff *skb, diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 58f48b8f42ae..55d68c31ad72 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -65,11 +65,26 @@ #define REG_DBG_PRINT(args...) #endif +/** + * enum reg_request_treatment - regulatory request treatment + * + * @REG_REQ_OK: continue processing the regulatory request + * @REG_REQ_IGNORE: ignore the regulatory request + * @REG_REQ_INTERSECT: the regulatory domain resulting from this request should + * be intersected with the current one. + * @REG_REQ_ALREADY_SET: the regulatory request will not change the current + * regulatory settings, and no further processing is required. + * @REG_REQ_USER_HINT_HANDLED: a non alpha2 user hint was handled and no + * further processing is required, i.e., not need to update last_request + * etc. This should be used for user hints that do not provide an alpha2 + * but some other type of regulatory hint, i.e., indoor operation. + */ enum reg_request_treatment { REG_REQ_OK, REG_REQ_IGNORE, REG_REQ_INTERSECT, REG_REQ_ALREADY_SET, + REG_REQ_USER_HINT_HANDLED, }; static struct regulatory_request core_request_world = { @@ -106,6 +121,14 @@ const struct ieee80211_regdomain __rcu *cfg80211_regdomain; */ static int reg_num_devs_support_basehint; +/* + * State variable indicating if the platform on which the devices + * are attached is operating in an indoor environment. The state variable + * is relevant for all registered devices. + * (protected by RTNL) + */ +static bool reg_is_indoor; + static const struct ieee80211_regdomain *get_cfg80211_regdom(void) { return rtnl_dereference(cfg80211_regdomain); @@ -1128,6 +1151,13 @@ static bool reg_request_cell_base(struct regulatory_request *request) return request->user_reg_hint_type == NL80211_USER_REG_HINT_CELL_BASE; } +static bool reg_request_indoor(struct regulatory_request *request) +{ + if (request->initiator != NL80211_REGDOM_SET_BY_USER) + return false; + return request->user_reg_hint_type == NL80211_USER_REG_HINT_INDOOR; +} + bool reg_last_request_cell_base(void) { return reg_request_cell_base(get_last_request()); @@ -1570,6 +1600,11 @@ __reg_process_hint_user(struct regulatory_request *user_request) { struct regulatory_request *lr = get_last_request(); + if (reg_request_indoor(user_request)) { + reg_is_indoor = true; + return REG_REQ_USER_HINT_HANDLED; + } + if (reg_request_cell_base(user_request)) return reg_ignore_cell_hint(user_request); @@ -1617,7 +1652,8 @@ reg_process_hint_user(struct regulatory_request *user_request) treatment = __reg_process_hint_user(user_request); if (treatment == REG_REQ_IGNORE || - treatment == REG_REQ_ALREADY_SET) { + treatment == REG_REQ_ALREADY_SET || + treatment == REG_REQ_USER_HINT_HANDLED) { kfree(user_request); return treatment; } @@ -1678,6 +1714,7 @@ reg_process_hint_driver(struct wiphy *wiphy, case REG_REQ_OK: break; case REG_REQ_IGNORE: + case REG_REQ_USER_HINT_HANDLED: kfree(driver_request); return treatment; case REG_REQ_INTERSECT: @@ -1777,6 +1814,7 @@ reg_process_hint_country_ie(struct wiphy *wiphy, case REG_REQ_OK: break; case REG_REQ_IGNORE: + case REG_REQ_USER_HINT_HANDLED: /* fall through */ case REG_REQ_ALREADY_SET: kfree(country_ie_request); @@ -1969,6 +2007,22 @@ int regulatory_hint_user(const char *alpha2, return 0; } +int regulatory_hint_indoor_user(void) +{ + struct regulatory_request *request; + + request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL); + if (!request) + return -ENOMEM; + + request->wiphy_idx = WIPHY_IDX_INVALID; + request->initiator = NL80211_REGDOM_SET_BY_USER; + request->user_reg_hint_type = NL80211_USER_REG_HINT_INDOOR; + queue_regulatory_request(request); + + return 0; +} + /* Driver hints */ int regulatory_hint(struct wiphy *wiphy, const char *alpha2) { @@ -2136,6 +2190,8 @@ static void restore_regulatory_settings(bool reset_user) ASSERT_RTNL(); + reg_is_indoor = false; + reset_regdomains(true, &world_regdom); restore_alpha2(alpha2, reset_user); diff --git a/net/wireless/reg.h b/net/wireless/reg.h index 334a53af0fc8..2a3842828f6d 100644 --- a/net/wireless/reg.h +++ b/net/wireless/reg.h @@ -25,6 +25,7 @@ enum nl80211_dfs_regions reg_get_dfs_region(struct wiphy *wiphy); int regulatory_hint_user(const char *alpha2, enum nl80211_user_reg_hint_type user_reg_hint_type); +int regulatory_hint_indoor_user(void); void wiphy_regulatory_register(struct wiphy *wiphy); void wiphy_regulatory_deregister(struct wiphy *wiphy); -- cgit v1.2.3 From ea077c1cea36a6b5ded1256dcd56c72ff2a22c62 Mon Sep 17 00:00:00 2001 From: Rostislav Lisovy Date: Tue, 15 Apr 2014 14:37:55 +0200 Subject: cfg80211: Add attributes describing prohibited channel bandwidth Since there are frequency bands (e.g. 5.9GHz) allowing channels with only 10 or 5 MHz bandwidth, this patch adds attributes that allow keeping track about this information. When channel attributes are reported to user-space, make sure to not break old tools, i.e. if the 'split wiphy dump' is enabled, report the extra attributes (if present) describing the bandwidth restrictions. If the 'split wiphy dump' is not enabled, completely omit those channels that have flags set to either IEEE80211_CHAN_NO_10MHZ or IEEE80211_CHAN_NO_20MHZ. Add the check for new bandwidth restriction flags in cfg80211_chandef_usable() to comply with the restrictions. Signed-off-by: Rostislav Lisovy Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 6 ++++++ include/uapi/linux/nl80211.h | 6 ++++++ net/wireless/chan.c | 2 ++ net/wireless/nl80211.c | 13 +++++++++++++ 4 files changed, 27 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 3dd2cb465540..c98cf08538b9 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -111,6 +111,10 @@ enum ieee80211_band { * restrictions. * @IEEE80211_CHAN_INDOOR_ONLY: see %NL80211_FREQUENCY_ATTR_INDOOR_ONLY * @IEEE80211_CHAN_GO_CONCURRENT: see %NL80211_FREQUENCY_ATTR_GO_CONCURRENT + * @IEEE80211_CHAN_NO_20MHZ: 20 MHz bandwidth is not permitted + * on this channel. + * @IEEE80211_CHAN_NO_10MHZ: 10 MHz bandwidth is not permitted + * on this channel. * */ enum ieee80211_channel_flags { @@ -125,6 +129,8 @@ enum ieee80211_channel_flags { IEEE80211_CHAN_NO_160MHZ = 1<<8, IEEE80211_CHAN_INDOOR_ONLY = 1<<9, IEEE80211_CHAN_GO_CONCURRENT = 1<<10, + IEEE80211_CHAN_NO_20MHZ = 1<<11, + IEEE80211_CHAN_NO_10MHZ = 1<<12, }; #define IEEE80211_CHAN_NO_HT40 \ diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 513bfd7b2e5f..0592032ff160 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2358,6 +2358,10 @@ enum nl80211_band_attr { * connected to an AP with DFS and radar detection on the UNII band (it is * up to user-space, i.e., wpa_supplicant to perform the required * verifications) + * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed + * on this channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -2384,6 +2388,8 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_DFS_CAC_TIME, NL80211_FREQUENCY_ATTR_INDOOR_ONLY, NL80211_FREQUENCY_ATTR_GO_CONCURRENT, + NL80211_FREQUENCY_ATTR_NO_20MHZ, + NL80211_FREQUENCY_ATTR_NO_10MHZ, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, diff --git a/net/wireless/chan.c b/net/wireless/chan.c index 2adf7b2eccbc..84d686e2dbd0 100644 --- a/net/wireless/chan.c +++ b/net/wireless/chan.c @@ -616,12 +616,14 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy, width = 5; break; case NL80211_CHAN_WIDTH_10: + prohibited_flags |= IEEE80211_CHAN_NO_10MHZ; width = 10; break; case NL80211_CHAN_WIDTH_20: if (!ht_cap->ht_supported) return false; case NL80211_CHAN_WIDTH_20_NOHT: + prohibited_flags |= IEEE80211_CHAN_NO_20MHZ; width = 20; break; case NL80211_CHAN_WIDTH_40: diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index fce423a4e96a..ca75f60041d2 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -567,6 +567,13 @@ static int nl80211_msg_put_channel(struct sk_buff *msg, struct ieee80211_channel *chan, bool large) { + /* Some channels must be completely excluded from the + * list to protect old user-space tools from breaking + */ + if (!large && chan->flags & + (IEEE80211_CHAN_NO_10MHZ | IEEE80211_CHAN_NO_20MHZ)) + return 0; + if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_FREQ, chan->center_freq)) goto nla_put_failure; @@ -620,6 +627,12 @@ static int nl80211_msg_put_channel(struct sk_buff *msg, if ((chan->flags & IEEE80211_CHAN_GO_CONCURRENT) && nla_put_flag(msg, NL80211_FREQUENCY_ATTR_GO_CONCURRENT)) goto nla_put_failure; + if ((chan->flags & IEEE80211_CHAN_NO_20MHZ) && + nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_20MHZ)) + goto nla_put_failure; + if ((chan->flags & IEEE80211_CHAN_NO_10MHZ) && + nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_10MHZ)) + goto nla_put_failure; } if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_MAX_TX_POWER, -- cgit v1.2.3 From e16821bcfb364b0c41142db275dc74b39fa42c30 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Mon, 28 Apr 2014 11:22:08 +0300 Subject: cfg80211: Dynamic channel bandwidth changes in AP mode This extends NL80211_CMD_SET_CHANNEL to allow dynamic channel bandwidth changes in AP mode (including P2P GO) during a lifetime of the BSS. This can be used to implement, e.g., HT 20/40 MHz co-existence rules on the 2.4 GHz band. Signed-off-by: Jouni Malinen Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 8 ++++++++ include/uapi/linux/nl80211.h | 4 ++++ net/wireless/nl80211.c | 40 ++++++++++++++++++++++++++++------------ net/wireless/rdev-ops.h | 13 +++++++++++++ net/wireless/trace.h | 18 ++++++++++++++++++ 5 files changed, 71 insertions(+), 12 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index c98cf08538b9..7eae46ccec01 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2290,6 +2290,10 @@ struct cfg80211_qos_map { * @channel_switch: initiate channel-switch procedure (with CSA) * * @set_qos_map: Set QoS mapping information to the driver + * + * @set_ap_chanwidth: Set the AP (including P2P GO) mode channel width for the + * given interface This is used e.g. for dynamic HT 20/40 MHz channel width + * changes during the lifetime of the BSS. */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -2533,9 +2537,13 @@ struct cfg80211_ops { int (*channel_switch)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_csa_settings *params); + int (*set_qos_map)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_qos_map *qos_map); + + int (*set_ap_chanwidth)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_chan_def *chandef); }; /* diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 0592032ff160..406010d4def0 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -3929,6 +3929,9 @@ enum nl80211_ap_sme_features { * interface. An active monitor interface behaves like a normal monitor * interface, but gets added to the driver. It ensures that incoming * unicast packets directed at the configured interface address get ACKed. + * @NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE: This driver supports dynamic + * channel bandwidth change (e.g., HT 20 <-> 40 MHz channel) during the + * lifetime of a BSS. */ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, @@ -3949,6 +3952,7 @@ enum nl80211_feature_flags { NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15, NL80211_FEATURE_USERSPACE_MPM = 1 << 16, NL80211_FEATURE_ACTIVE_MONITOR = 1 << 17, + NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE = 1 << 18, }; /** diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index ca75f60041d2..0f1b18f209d6 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -1928,18 +1928,20 @@ static int nl80211_parse_chandef(struct cfg80211_registered_device *rdev, } static int __nl80211_set_channel(struct cfg80211_registered_device *rdev, - struct wireless_dev *wdev, + struct net_device *dev, struct genl_info *info) { struct cfg80211_chan_def chandef; int result; enum nl80211_iftype iftype = NL80211_IFTYPE_MONITOR; + struct wireless_dev *wdev = NULL; - if (wdev) - iftype = wdev->iftype; - + if (dev) + wdev = dev->ieee80211_ptr; if (!nl80211_can_set_dev_channel(wdev)) return -EOPNOTSUPP; + if (wdev) + iftype = wdev->iftype; result = nl80211_parse_chandef(rdev, info, &chandef); if (result) @@ -1948,14 +1950,27 @@ static int __nl80211_set_channel(struct cfg80211_registered_device *rdev, switch (iftype) { case NL80211_IFTYPE_AP: case NL80211_IFTYPE_P2P_GO: - if (wdev->beacon_interval) { - result = -EBUSY; - break; - } if (!cfg80211_reg_can_beacon(&rdev->wiphy, &chandef, iftype)) { result = -EINVAL; break; } + if (wdev->beacon_interval) { + if (!dev || !rdev->ops->set_ap_chanwidth || + !(rdev->wiphy.features & + NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE)) { + result = -EBUSY; + break; + } + + /* Only allow dynamic channel width changes */ + if (chandef.chan != wdev->preset_chandef.chan) { + result = -EBUSY; + break; + } + result = rdev_set_ap_chanwidth(rdev, dev, &chandef); + if (result) + break; + } wdev->preset_chandef = chandef; result = 0; break; @@ -1977,7 +1992,7 @@ static int nl80211_set_channel(struct sk_buff *skb, struct genl_info *info) struct cfg80211_registered_device *rdev = info->user_ptr[0]; struct net_device *netdev = info->user_ptr[1]; - return __nl80211_set_channel(rdev, netdev->ieee80211_ptr, info); + return __nl80211_set_channel(rdev, netdev, info); } static int nl80211_set_wds_peer(struct sk_buff *skb, struct genl_info *info) @@ -2099,9 +2114,10 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info) } if (info->attrs[NL80211_ATTR_WIPHY_FREQ]) { - result = __nl80211_set_channel(rdev, - nl80211_can_set_dev_channel(wdev) ? wdev : NULL, - info); + result = __nl80211_set_channel( + rdev, + nl80211_can_set_dev_channel(wdev) ? netdev : NULL, + info); if (result) return result; } diff --git a/net/wireless/rdev-ops.h b/net/wireless/rdev-ops.h index 74d97d33c938..00cdf73ba6c4 100644 --- a/net/wireless/rdev-ops.h +++ b/net/wireless/rdev-ops.h @@ -950,4 +950,17 @@ static inline int rdev_set_qos_map(struct cfg80211_registered_device *rdev, return ret; } +static inline int +rdev_set_ap_chanwidth(struct cfg80211_registered_device *rdev, + struct net_device *dev, struct cfg80211_chan_def *chandef) +{ + int ret; + + trace_rdev_set_ap_chanwidth(&rdev->wiphy, dev, chandef); + ret = rdev->ops->set_ap_chanwidth(&rdev->wiphy, dev, chandef); + trace_rdev_return_int(&rdev->wiphy, ret); + + return ret; +} + #endif /* __CFG80211_RDEV_OPS */ diff --git a/net/wireless/trace.h b/net/wireless/trace.h index 47b499f8f54d..f3c13ff4d04c 100644 --- a/net/wireless/trace.h +++ b/net/wireless/trace.h @@ -1919,6 +1919,24 @@ TRACE_EVENT(rdev_set_qos_map, WIPHY_PR_ARG, NETDEV_PR_ARG, __entry->num_des) ); +TRACE_EVENT(rdev_set_ap_chanwidth, + TP_PROTO(struct wiphy *wiphy, struct net_device *netdev, + struct cfg80211_chan_def *chandef), + TP_ARGS(wiphy, netdev, chandef), + TP_STRUCT__entry( + WIPHY_ENTRY + NETDEV_ENTRY + CHAN_DEF_ENTRY + ), + TP_fast_assign( + WIPHY_ASSIGN; + NETDEV_ASSIGN; + CHAN_DEF_ASSIGN(chandef); + ), + TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", " CHAN_DEF_PR_FMT, + WIPHY_PR_ARG, NETDEV_PR_ARG, CHAN_DEF_PR_ARG) +); + /************************************************************* * cfg80211 exported functions traces * *************************************************************/ -- cgit v1.2.3