From 446411e18b2cb17d153e45f634a3c9a79ada3ac2 Mon Sep 17 00:00:00 2001 From: Andreas Larsson Date: Wed, 13 Feb 2013 14:20:25 +0100 Subject: spi: Initialize cs_gpio and cs_gpios with -ENOENT The return value from of_get_named_gpio is -ENOENT when the given index matches a hole in the "cs-gpios" property phandle list. However, the default value of cs_gpio in struct spi_device and entries of cs_gpios in struct spi_master is -EINVAL, which is documented to indicate that a GPIO line should not be used for the given spi_device. This sets the default value of cs_gpio in struct spi_device and entries of cs_gpios in struct spi_master to -ENOENT. Thus, -ENOENT is the only value used to indicate that no GPIO line should be used. Signed-off-by: Andreas Larsson Signed-off-by: Grant Likely --- include/linux/spi/spi.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 38c2b925923d..c395f32b53b3 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -57,7 +57,7 @@ extern struct bus_type spi_bus_type; * @modalias: Name of the driver to use with this device, or an alias * for that name. This appears in the sysfs "modalias" attribute * for driver coldplugging, and in uevents used for hotplugging - * @cs_gpio: gpio number of the chipselect line (optional, -EINVAL when + * @cs_gpio: gpio number of the chipselect line (optional, -ENOENT when * when not using a GPIO line) * * A @spi_device is used to interchange data between an SPI slave @@ -261,7 +261,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * queue so the subsystem notifies the driver that it may relax the * hardware by issuing this call * @cs_gpios: Array of GPIOs to use as chip select lines; one per CS - * number. Any individual value may be -EINVAL for CS lines that + * number. Any individual value may be -ENOENT for CS lines that * are not GPIOs (driven by the SPI controller itself). * * Each SPI master controller can communicate with one or more @spi_device -- cgit v1.2.3 From d450f445f9a654080a6be4094376c2192d9a1f36 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 19 Feb 2013 02:58:25 +0300 Subject: : fix compilation warnings with DT disabled MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the following compilation warnings (in Simon Horman's renesas.git repo): In file included from arch/arm/mach-shmobile/setup-r8a7779.c:24:0: include/linux/of_platform.h:107:13: warning: ‘struct of_device_id’ declared inside parameter list [enabled by default] include/linux/of_platform.h:107:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] include/linux/of_platform.h:107:13: warning: ‘struct device_node’ declared inside parameter list [enabled by default] only #include's headers with definitions of the above mentioned structures if CONFIG_OF_DEVICE=y but uses them even if not. One solution is to move some #include's out of #ifdef CONFIG_OF_DEVICE and use incomplete declarations for the rest of the structures where the #ifdef move doesn't help... Reported-by: Vladimir Barinov Signed-off-by: Sergei Shtylyov Signed-off-by: Rob Herring --- include/linux/of_platform.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/of_platform.h b/include/linux/of_platform.h index 3863a4dbdf18..2a93b64a3869 100644 --- a/include/linux/of_platform.h +++ b/include/linux/of_platform.h @@ -11,9 +11,10 @@ * */ -#ifdef CONFIG_OF_DEVICE #include #include + +#ifdef CONFIG_OF_DEVICE #include #include #include @@ -100,7 +101,7 @@ extern int of_platform_populate(struct device_node *root, #if !defined(CONFIG_OF_ADDRESS) struct of_dev_auxdata; -struct device; +struct device_node; static inline int of_platform_populate(struct device_node *root, const struct of_device_id *matches, const struct of_dev_auxdata *lookup, -- cgit v1.2.3 From e30b5dca15dea86aa697f9d58ff646294fe80d3d Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Fri, 3 May 2013 02:15:52 -0400 Subject: ext4: fix fio regression We (Linux Kernel Performance project) found a regression introduced by commit: f7fec032aa ext4: track all extent status in extent status tree The commit causes about 20% performance decrease in fio random write test. Profiler shows that rb_next() uses a lot of CPU time. The call stack is: rb_next ext4_es_find_delayed_extent ext4_map_blocks _ext4_get_block ext4_get_block_write __blockdev_direct_IO ext4_direct_IO generic_file_direct_write __generic_file_aio_write ext4_file_write aio_rw_vect_retry aio_run_iocb do_io_submit sys_io_submit system_call_fastpath io_submit td_io_getevents io_u_queued_complete thread_main main __libc_start_main The cause is that ext4_es_find_delayed_extent() doesn't have an upper bound, it keeps searching until a delayed extent is found. When there are a lots of non-delayed entries in the extent state tree, ext4_es_find_delayed_extent() may uses a lot of CPU time. Reported-by: LKP project Signed-off-by: Yan, Zheng Signed-off-by: Zheng Liu Cc: "Theodore Ts'o" --- fs/ext4/extents.c | 9 +++++---- fs/ext4/extents_status.c | 17 ++++++++++++----- fs/ext4/extents_status.h | 3 ++- fs/ext4/file.c | 4 ++-- include/trace/events/ext4.h | 4 ++-- 5 files changed, 23 insertions(+), 14 deletions(-) (limited to 'include') diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 107936db244e..bc0f1910b9cf 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -3642,7 +3642,7 @@ int ext4_find_delalloc_range(struct inode *inode, { struct extent_status es; - ext4_es_find_delayed_extent(inode, lblk_start, &es); + ext4_es_find_delayed_extent_range(inode, lblk_start, lblk_end, &es); if (es.es_len == 0) return 0; /* there is no delay extent in this tree */ else if (es.es_lblk <= lblk_start && @@ -4608,9 +4608,10 @@ static int ext4_find_delayed_extent(struct inode *inode, struct extent_status es; ext4_lblk_t block, next_del; - ext4_es_find_delayed_extent(inode, newes->es_lblk, &es); - if (newes->es_pblk == 0) { + ext4_es_find_delayed_extent_range(inode, newes->es_lblk, + newes->es_lblk + newes->es_len - 1, &es); + /* * No extent in extent-tree contains block @newes->es_pblk, * then the block may stay in 1)a hole or 2)delayed-extent. @@ -4630,7 +4631,7 @@ static int ext4_find_delayed_extent(struct inode *inode, } block = newes->es_lblk + newes->es_len; - ext4_es_find_delayed_extent(inode, block, &es); + ext4_es_find_delayed_extent_range(inode, block, EXT_MAX_BLOCKS, &es); if (es.es_len == 0) next_del = EXT_MAX_BLOCKS; else diff --git a/fs/ext4/extents_status.c b/fs/ext4/extents_status.c index fe3337a85ede..e6941e622d31 100644 --- a/fs/ext4/extents_status.c +++ b/fs/ext4/extents_status.c @@ -232,14 +232,16 @@ static struct extent_status *__es_tree_search(struct rb_root *root, } /* - * ext4_es_find_delayed_extent: find the 1st delayed extent covering @es->lblk - * if it exists, otherwise, the next extent after @es->lblk. + * ext4_es_find_delayed_extent_range: find the 1st delayed extent covering + * @es->lblk if it exists, otherwise, the next extent after @es->lblk. * * @inode: the inode which owns delayed extents * @lblk: the offset where we start to search + * @end: the offset where we stop to search * @es: delayed extent that we found */ -void ext4_es_find_delayed_extent(struct inode *inode, ext4_lblk_t lblk, +void ext4_es_find_delayed_extent_range(struct inode *inode, + ext4_lblk_t lblk, ext4_lblk_t end, struct extent_status *es) { struct ext4_es_tree *tree = NULL; @@ -247,7 +249,8 @@ void ext4_es_find_delayed_extent(struct inode *inode, ext4_lblk_t lblk, struct rb_node *node; BUG_ON(es == NULL); - trace_ext4_es_find_delayed_extent_enter(inode, lblk); + BUG_ON(end < lblk); + trace_ext4_es_find_delayed_extent_range_enter(inode, lblk); read_lock(&EXT4_I(inode)->i_es_lock); tree = &EXT4_I(inode)->i_es_tree; @@ -270,6 +273,10 @@ out: if (es1 && !ext4_es_is_delayed(es1)) { while ((node = rb_next(&es1->rb_node)) != NULL) { es1 = rb_entry(node, struct extent_status, rb_node); + if (es1->es_lblk > end) { + es1 = NULL; + break; + } if (ext4_es_is_delayed(es1)) break; } @@ -285,7 +292,7 @@ out: read_unlock(&EXT4_I(inode)->i_es_lock); ext4_es_lru_add(inode); - trace_ext4_es_find_delayed_extent_exit(inode, es); + trace_ext4_es_find_delayed_extent_range_exit(inode, es); } static struct extent_status * diff --git a/fs/ext4/extents_status.h b/fs/ext4/extents_status.h index d8e2d4dc311e..f740eb03b707 100644 --- a/fs/ext4/extents_status.h +++ b/fs/ext4/extents_status.h @@ -62,7 +62,8 @@ extern int ext4_es_insert_extent(struct inode *inode, ext4_lblk_t lblk, unsigned long long status); extern int ext4_es_remove_extent(struct inode *inode, ext4_lblk_t lblk, ext4_lblk_t len); -extern void ext4_es_find_delayed_extent(struct inode *inode, ext4_lblk_t lblk, +extern void ext4_es_find_delayed_extent_range(struct inode *inode, + ext4_lblk_t lblk, ext4_lblk_t end, struct extent_status *es); extern int ext4_es_lookup_extent(struct inode *inode, ext4_lblk_t lblk, struct extent_status *es); diff --git a/fs/ext4/file.c b/fs/ext4/file.c index 64848b595b24..1bc4523541d6 100644 --- a/fs/ext4/file.c +++ b/fs/ext4/file.c @@ -464,7 +464,7 @@ static loff_t ext4_seek_data(struct file *file, loff_t offset, loff_t maxsize) * If there is a delay extent at this offset, * it will be as a data. */ - ext4_es_find_delayed_extent(inode, last, &es); + ext4_es_find_delayed_extent_range(inode, last, last, &es); if (es.es_len != 0 && in_range(last, es.es_lblk, es.es_len)) { if (last != start) dataoff = last << blkbits; @@ -547,7 +547,7 @@ static loff_t ext4_seek_hole(struct file *file, loff_t offset, loff_t maxsize) * If there is a delay extent at this offset, * we will skip this extent. */ - ext4_es_find_delayed_extent(inode, last, &es); + ext4_es_find_delayed_extent_range(inode, last, last, &es); if (es.es_len != 0 && in_range(last, es.es_lblk, es.es_len)) { last = es.es_lblk + es.es_len; holeoff = last << blkbits; diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h index d0e686402df8..8ee15b97cd38 100644 --- a/include/trace/events/ext4.h +++ b/include/trace/events/ext4.h @@ -2139,7 +2139,7 @@ TRACE_EVENT(ext4_es_remove_extent, __entry->lblk, __entry->len) ); -TRACE_EVENT(ext4_es_find_delayed_extent_enter, +TRACE_EVENT(ext4_es_find_delayed_extent_range_enter, TP_PROTO(struct inode *inode, ext4_lblk_t lblk), TP_ARGS(inode, lblk), @@ -2161,7 +2161,7 @@ TRACE_EVENT(ext4_es_find_delayed_extent_enter, (unsigned long) __entry->ino, __entry->lblk) ); -TRACE_EVENT(ext4_es_find_delayed_extent_exit, +TRACE_EVENT(ext4_es_find_delayed_extent_range_exit, TP_PROTO(struct inode *inode, struct extent_status *es), TP_ARGS(inode, es), -- cgit v1.2.3 From 2acd09f3232825a0e95134703ec59bc327ef9967 Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Thu, 25 Apr 2013 15:04:02 -0700 Subject: target: Remove unused struct members in se_dev_entry Some were incremented, but never used anywhere from what I could tell. Signed-off-by: Andy Grover Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_device.c | 14 -------------- drivers/target/target_core_internal.h | 1 - drivers/target/target_core_transport.c | 2 -- include/target/target_core_base.h | 4 ---- 4 files changed, 21 deletions(-) (limited to 'include') diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index 2e4d655471bc..4630481b6043 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -68,7 +68,6 @@ transport_lookup_cmd_lun(struct se_cmd *se_cmd, u32 unpacked_lun) struct se_dev_entry *deve = se_cmd->se_deve; deve->total_cmds++; - deve->total_bytes += se_cmd->data_length; if ((se_cmd->data_direction == DMA_TO_DEVICE) && (deve->lun_flags & TRANSPORT_LUNFLAGS_READ_ONLY)) { @@ -85,8 +84,6 @@ transport_lookup_cmd_lun(struct se_cmd *se_cmd, u32 unpacked_lun) else if (se_cmd->data_direction == DMA_FROM_DEVICE) deve->read_bytes += se_cmd->data_length; - deve->deve_cmds++; - se_lun = deve->se_lun; se_cmd->se_lun = deve->se_lun; se_cmd->pr_res_key = deve->pr_res_key; @@ -275,17 +272,6 @@ int core_free_device_list_for_node( return 0; } -void core_dec_lacl_count(struct se_node_acl *se_nacl, struct se_cmd *se_cmd) -{ - struct se_dev_entry *deve; - unsigned long flags; - - spin_lock_irqsave(&se_nacl->device_list_lock, flags); - deve = se_nacl->device_list[se_cmd->orig_fe_lun]; - deve->deve_cmds--; - spin_unlock_irqrestore(&se_nacl->device_list_lock, flags); -} - void core_update_device_list_access( u32 mapped_lun, u32 lun_access, diff --git a/drivers/target/target_core_internal.h b/drivers/target/target_core_internal.h index 853bab60e362..18d49df4d0ac 100644 --- a/drivers/target/target_core_internal.h +++ b/drivers/target/target_core_internal.h @@ -8,7 +8,6 @@ extern struct t10_alua_lu_gp *default_lu_gp; struct se_dev_entry *core_get_se_deve_from_rtpi(struct se_node_acl *, u16); int core_free_device_list_for_node(struct se_node_acl *, struct se_portal_group *); -void core_dec_lacl_count(struct se_node_acl *, struct se_cmd *); void core_update_device_list_access(u32, u32, struct se_node_acl *); int core_enable_device_list_for_node(struct se_lun *, struct se_lun_acl *, u32, u32, struct se_node_acl *, struct se_portal_group *); diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index f8388b4024aa..c3477fa60942 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2163,8 +2163,6 @@ void transport_generic_free_cmd(struct se_cmd *cmd, int wait_for_tasks) if (wait_for_tasks) transport_wait_for_tasks(cmd); - core_dec_lacl_count(cmd->se_sess->se_node_acl, cmd); - if (cmd->se_lun) transport_lun_remove_cmd(cmd); diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index c4af592f7057..136b7b2f7b32 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -572,12 +572,8 @@ struct se_dev_entry { bool def_pr_registered; /* See transport_lunflags_table */ u32 lun_flags; - u32 deve_cmds; u32 mapped_lun; - u32 average_bytes; - u32 last_byte_count; u32 total_cmds; - u32 total_bytes; u64 pr_res_key; u64 creation_time; u32 attach_count; -- cgit v1.2.3 From 54afc1214133deddd49162b101971af5711f1b3a Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Wed, 8 May 2013 16:38:33 +0300 Subject: drm: Add kernel-doc for drm_fb_helper_funcs->initial_config MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Ville Syrjälä Signed-off-by: Dave Airlie --- include/drm/drm_fb_helper.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h index 8230b46fdd73..61ebd51f6112 100644 --- a/include/drm/drm_fb_helper.h +++ b/include/drm/drm_fb_helper.h @@ -57,6 +57,7 @@ struct drm_fb_helper_surface_size { * @fb_probe: - Driver callback to allocate and initialize the fbdev info * structure. Futhermore it also needs to allocate the drm * framebuffer used to back the fbdev. + * @initial_config: - Setup an initial fbdev display configuration * * Driver callbacks used by the fbdev emulation helper library. */ -- cgit v1.2.3 From 7b97936f298af7991ca4717a4c23610d9ecd8927 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Wed, 8 May 2013 16:38:34 +0300 Subject: drm: Remove pointless '-' characters from drm_fb_helper documentation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Ville Syrjälä Signed-off-by: Dave Airlie --- include/drm/drm_fb_helper.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'include') diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h index 61ebd51f6112..471f276ce8f7 100644 --- a/include/drm/drm_fb_helper.h +++ b/include/drm/drm_fb_helper.h @@ -50,14 +50,14 @@ struct drm_fb_helper_surface_size { /** * struct drm_fb_helper_funcs - driver callbacks for the fbdev emulation library - * @gamma_set: - Set the given gamma lut register on the given crtc. - * @gamma_get: - Read the given gamma lut register on the given crtc, used to - * save the current lut when force-restoring the fbdev for e.g. - * kdbg. - * @fb_probe: - Driver callback to allocate and initialize the fbdev info - * structure. Futhermore it also needs to allocate the drm - * framebuffer used to back the fbdev. - * @initial_config: - Setup an initial fbdev display configuration + * @gamma_set: Set the given gamma lut register on the given crtc. + * @gamma_get: Read the given gamma lut register on the given crtc, used to + * save the current lut when force-restoring the fbdev for e.g. + * kdbg. + * @fb_probe: Driver callback to allocate and initialize the fbdev info + * structure. Futhermore it also needs to allocate the drm + * framebuffer used to back the fbdev. + * @initial_config: Setup an initial fbdev display configuration * * Driver callbacks used by the fbdev emulation helper library. */ -- cgit v1.2.3 From b9434d0f162c351e02e0e8f66ca6b75a67595537 Mon Sep 17 00:00:00 2001 From: Chris Cummins Date: Thu, 9 May 2013 14:20:40 +0100 Subject: drm: Use names of ioctls in debug traces MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The intention here is to make the output of dmesg with full verbosity a bit easier for a human to parse. This commit transforms: [drm:drm_ioctl], pid=699, cmd=0x6458, nr=0x58, dev 0xe200, auth=1 [drm:drm_ioctl], pid=699, cmd=0xc010645b, nr=0x5b, dev 0xe200, auth=1 [drm:drm_ioctl], pid=699, cmd=0xc0106461, nr=0x61, dev 0xe200, auth=1 [drm:drm_ioctl], pid=699, cmd=0xc01c64ae, nr=0xae, dev 0xe200, auth=1 [drm:drm_mode_addfb], [FB:32] [drm:drm_ioctl], pid=699, cmd=0xc0106464, nr=0x64, dev 0xe200, auth=1 [drm:drm_vm_open_locked], 0x7fd9302fe000,0x00a00000 [drm:drm_ioctl], pid=699, cmd=0x400c645f, nr=0x5f, dev 0xe200, auth=1 [drm:drm_ioctl], pid=699, cmd=0xc00464af, nr=0xaf, dev 0xe200, auth=1 [drm:intel_crtc_set_config], [CRTC:3] [NOFB] into: [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, I915_GEM_THROTTLE [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, I915_GEM_CREATE [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, I915_GEM_SET_TILING [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, IOCTL_MODE_ADDFB [drm:drm_mode_addfb], [FB:32] [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, I915_GEM_MMAP_GTT [drm:drm_vm_open_locked], 0x7fd9302fe000,0x00a00000 [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, I915_GEM_SET_DOMAIN [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, DRM_IOCTL_MODE_RMFB [drm:intel_crtc_set_config], [CRTC:3] [NOFB] v2: drm_ioctls is now a constant (Ville Syrjälä) Signed-off-by: Chris Cummins Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_drv.c | 20 +++++++++++++------- include/drm/drmP.h | 3 ++- 2 files changed, 15 insertions(+), 8 deletions(-) (limited to 'include') diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index 8d4f29075af5..9cc247f55502 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -57,7 +57,7 @@ static int drm_version(struct drm_device *dev, void *data, struct drm_file *file_priv); #define DRM_IOCTL_DEF(ioctl, _func, _flags) \ - [DRM_IOCTL_NR(ioctl)] = {.cmd = ioctl, .func = _func, .flags = _flags, .cmd_drv = 0} + [DRM_IOCTL_NR(ioctl)] = {.cmd = ioctl, .func = _func, .flags = _flags, .cmd_drv = 0, .name = #ioctl} /** Ioctl table */ static const struct drm_ioctl_desc drm_ioctls[] = { @@ -375,7 +375,7 @@ long drm_ioctl(struct file *filp, { struct drm_file *file_priv = filp->private_data; struct drm_device *dev; - const struct drm_ioctl_desc *ioctl; + const struct drm_ioctl_desc *ioctl = NULL; drm_ioctl_t *func; unsigned int nr = DRM_IOCTL_NR(cmd); int retcode = -EINVAL; @@ -392,11 +392,6 @@ long drm_ioctl(struct file *filp, atomic_inc(&dev->counts[_DRM_STAT_IOCTLS]); ++file_priv->ioctl_count; - DRM_DEBUG("pid=%d, cmd=0x%02x, nr=0x%02x, dev 0x%lx, auth=%d\n", - task_pid_nr(current), cmd, nr, - (long)old_encode_dev(file_priv->minor->device), - file_priv->authenticated); - if ((nr >= DRM_CORE_IOCTL_COUNT) && ((nr < DRM_COMMAND_BASE) || (nr >= DRM_COMMAND_END))) goto err_i1; @@ -417,6 +412,11 @@ long drm_ioctl(struct file *filp, } else goto err_i1; + DRM_DEBUG("pid=%d, dev=0x%lx, auth=%d, %s\n", + task_pid_nr(current), + (long)old_encode_dev(file_priv->minor->device), + file_priv->authenticated, ioctl->name); + /* Do not trust userspace, use our own definition */ func = ioctl->func; /* is there a local override? */ @@ -471,6 +471,12 @@ long drm_ioctl(struct file *filp, } err_i1: + if (!ioctl) + DRM_DEBUG("invalid iotcl: pid=%d, dev=0x%lx, auth=%d, cmd=0x%02x, nr=0x%02x\n", + task_pid_nr(current), + (long)old_encode_dev(file_priv->minor->device), + file_priv->authenticated, cmd, nr); + if (kdata != stack_kdata) kfree(kdata); atomic_dec(&dev->ioctl_count); diff --git a/include/drm/drmP.h b/include/drm/drmP.h index f1ce786736e4..b092b5bcf227 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -316,6 +316,7 @@ struct drm_ioctl_desc { int flags; drm_ioctl_t *func; unsigned int cmd_drv; + const char *name; }; /** @@ -324,7 +325,7 @@ struct drm_ioctl_desc { */ #define DRM_IOCTL_DEF_DRV(ioctl, _func, _flags) \ - [DRM_IOCTL_NR(DRM_##ioctl)] = {.cmd = DRM_##ioctl, .func = _func, .flags = _flags, .cmd_drv = DRM_IOCTL_##ioctl} + [DRM_IOCTL_NR(DRM_##ioctl)] = {.cmd = DRM_##ioctl, .func = _func, .flags = _flags, .cmd_drv = DRM_IOCTL_##ioctl, .name = #ioctl} struct drm_magic_entry { struct list_head head; -- cgit v1.2.3 From 7677fc965fba41d1386fa3b76a1f00303f02bb2d Mon Sep 17 00:00:00 2001 From: Rony Efraim Date: Wed, 8 May 2013 22:22:35 +0000 Subject: net/mlx4: Strengthen VLAN tags/priorities enforcement in VST mode Make sure that the following steps are taken: - drop packets sent by the VF with vlan tag - block packets with vlan tag which are steered to the VF - drop/block tagged packets when the policy is priority-tagged - make sure VLAN stripping for received packets is set - make sure force UP bit for the VF QP is set Use enum values for all the above instead of numerical bit offsets. Signed-off-by: Rony Efraim Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_resources.c | 2 +- .../net/ethernet/mellanox/mlx4/resource_tracker.c | 20 ++++++++++++--- include/linux/mlx4/qp.h | 29 ++++++++++++++++++++-- 3 files changed, 45 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_resources.c b/drivers/net/ethernet/mellanox/mlx4/en_resources.c index 91f2b2c43c12..d3f508697a3d 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_resources.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_resources.c @@ -60,7 +60,7 @@ void mlx4_en_fill_qp_context(struct mlx4_en_priv *priv, int size, int stride, context->pri_path.sched_queue = 0x83 | (priv->port - 1) << 6; if (user_prio >= 0) { context->pri_path.sched_queue |= user_prio << 3; - context->pri_path.feup = 1 << 6; + context->pri_path.feup = MLX4_FEUP_FORCE_ETH_UP; } context->pri_path.counter_index = 0xff; context->cqn_send = cpu_to_be32(cqn); diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index d4a9de666fbd..1157f028a90f 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -372,14 +372,28 @@ static int update_vport_qp_param(struct mlx4_dev *dev, if (MLX4_QP_ST_RC == qp_type) return -EINVAL; + /* force strip vlan by clear vsd */ + qpc->param3 &= ~cpu_to_be32(MLX4_STRIP_VLAN); + if (0 != vp_oper->state.default_vlan) { + qpc->pri_path.vlan_control = + MLX4_VLAN_CTRL_ETH_TX_BLOCK_TAGGED | + MLX4_VLAN_CTRL_ETH_RX_BLOCK_PRIO_TAGGED | + MLX4_VLAN_CTRL_ETH_RX_BLOCK_UNTAGGED; + } else { /* priority tagged */ + qpc->pri_path.vlan_control = + MLX4_VLAN_CTRL_ETH_TX_BLOCK_TAGGED | + MLX4_VLAN_CTRL_ETH_RX_BLOCK_TAGGED; + } + + qpc->pri_path.fvl_rx |= MLX4_FVL_RX_FORCE_ETH_VLAN; qpc->pri_path.vlan_index = vp_oper->vlan_idx; - qpc->pri_path.fl = (1 << 6) | (1 << 2); /* set cv bit and hide_cqe_vlan bit*/ - qpc->pri_path.feup |= 1 << 3; /* set fvl bit */ + qpc->pri_path.fl |= MLX4_FL_CV | MLX4_FL_ETH_HIDE_CQE_VLAN; + qpc->pri_path.feup |= MLX4_FEUP_FORCE_ETH_UP | MLX4_FVL_FORCE_ETH_VLAN; qpc->pri_path.sched_queue &= 0xC7; qpc->pri_path.sched_queue |= (vp_oper->state.default_qos) << 3; } if (vp_oper->state.spoofchk) { - qpc->pri_path.feup |= 1 << 5; /* set fsm bit */; + qpc->pri_path.feup |= MLX4_FSM_FORCE_ETH_SRC_MAC; qpc->pri_path.grh_mylmc = (0x80 & qpc->pri_path.grh_mylmc) + vp_oper->mac_idx; } return 0; diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h index 67f46ad6920a..352eec9df1b8 100644 --- a/include/linux/mlx4/qp.h +++ b/include/linux/mlx4/qp.h @@ -126,7 +126,7 @@ struct mlx4_rss_context { struct mlx4_qp_path { u8 fl; - u8 reserved1[1]; + u8 vlan_control; u8 disable_pkey_check; u8 pkey_index; u8 counter_index; @@ -141,11 +141,32 @@ struct mlx4_qp_path { u8 sched_queue; u8 vlan_index; u8 feup; - u8 reserved3; + u8 fvl_rx; u8 reserved4[2]; u8 dmac[6]; }; +enum { /* fl */ + MLX4_FL_CV = 1 << 6, + MLX4_FL_ETH_HIDE_CQE_VLAN = 1 << 2 +}; +enum { /* vlan_control */ + MLX4_VLAN_CTRL_ETH_TX_BLOCK_TAGGED = 1 << 6, + MLX4_VLAN_CTRL_ETH_RX_BLOCK_TAGGED = 1 << 2, + MLX4_VLAN_CTRL_ETH_RX_BLOCK_PRIO_TAGGED = 1 << 1, /* 802.1p priority tag */ + MLX4_VLAN_CTRL_ETH_RX_BLOCK_UNTAGGED = 1 << 0 +}; + +enum { /* feup */ + MLX4_FEUP_FORCE_ETH_UP = 1 << 6, /* force Eth UP */ + MLX4_FSM_FORCE_ETH_SRC_MAC = 1 << 5, /* force Source MAC */ + MLX4_FVL_FORCE_ETH_VLAN = 1 << 3 /* force Eth vlan */ +}; + +enum { /* fvl_rx */ + MLX4_FVL_RX_FORCE_ETH_VLAN = 1 << 0 /* enforce Eth rx vlan */ +}; + struct mlx4_qp_context { __be32 flags; __be32 pd; @@ -185,6 +206,10 @@ struct mlx4_qp_context { u32 reserved5[10]; }; +enum { /* param3 */ + MLX4_STRIP_VLAN = 1 << 30 +}; + /* Which firmware version adds support for NEC (NoErrorCompletion) bit */ #define MLX4_FW_VER_WQE_CTRL_NEC mlx4_fw_ver(2, 2, 232) -- cgit v1.2.3 From f77d602124d865c38705df7fa25c03de9c284ad2 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 9 May 2013 10:28:16 +0000 Subject: ipv6: do not clear pinet6 field We have seen multiple NULL dereferences in __inet6_lookup_established() After analysis, I found that inet6_sk() could be NULL while the check for sk_family == AF_INET6 was true. Bug was added in linux-2.6.29 when RCU lookups were introduced in UDP and TCP stacks. Once an IPv6 socket, using SLAB_DESTROY_BY_RCU is inserted in a hash table, we no longer can clear pinet6 field. This patch extends logic used in commit fcbdf09d9652c891 ("net: fix nulls list corruptions in sk_prot_alloc") TCP/UDP/UDPLite IPv6 protocols provide their own .clear_sk() method to make sure we do not clear pinet6 field. At socket clone phase, we do not really care, as cloning the parent (non NULL) pinet6 is not adding a fatal race. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/sock.h | 12 ++++++++++++ net/core/sock.c | 12 ------------ net/ipv6/tcp_ipv6.c | 12 ++++++++++++ net/ipv6/udp.c | 13 ++++++++++++- net/ipv6/udp_impl.h | 2 ++ net/ipv6/udplite.c | 2 +- 6 files changed, 39 insertions(+), 14 deletions(-) (limited to 'include') diff --git a/include/net/sock.h b/include/net/sock.h index 5c97b0fc5623..66772cf8c3c5 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -866,6 +866,18 @@ struct inet_hashinfo; struct raw_hashinfo; struct module; +/* + * caches using SLAB_DESTROY_BY_RCU should let .next pointer from nulls nodes + * un-modified. Special care is taken when initializing object to zero. + */ +static inline void sk_prot_clear_nulls(struct sock *sk, int size) +{ + if (offsetof(struct sock, sk_node.next) != 0) + memset(sk, 0, offsetof(struct sock, sk_node.next)); + memset(&sk->sk_node.pprev, 0, + size - offsetof(struct sock, sk_node.pprev)); +} + /* Networking protocol blocks we attach to sockets. * socket layer -> transport layer interface * transport -> network interface is defined by struct inet_proto diff --git a/net/core/sock.c b/net/core/sock.c index d4f4cea726e7..6ba327da79e1 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -1217,18 +1217,6 @@ static void sock_copy(struct sock *nsk, const struct sock *osk) #endif } -/* - * caches using SLAB_DESTROY_BY_RCU should let .next pointer from nulls nodes - * un-modified. Special care is taken when initializing object to zero. - */ -static inline void sk_prot_clear_nulls(struct sock *sk, int size) -{ - if (offsetof(struct sock, sk_node.next) != 0) - memset(sk, 0, offsetof(struct sock, sk_node.next)); - memset(&sk->sk_node.pprev, 0, - size - offsetof(struct sock, sk_node.pprev)); -} - void sk_prot_clear_portaddr_nulls(struct sock *sk, int size) { unsigned long nulls1, nulls2; diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 71167069b394..0a17ed9eaf39 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -1890,6 +1890,17 @@ void tcp6_proc_exit(struct net *net) } #endif +static void tcp_v6_clear_sk(struct sock *sk, int size) +{ + struct inet_sock *inet = inet_sk(sk); + + /* we do not want to clear pinet6 field, because of RCU lookups */ + sk_prot_clear_nulls(sk, offsetof(struct inet_sock, pinet6)); + + size -= offsetof(struct inet_sock, pinet6) + sizeof(inet->pinet6); + memset(&inet->pinet6 + 1, 0, size); +} + struct proto tcpv6_prot = { .name = "TCPv6", .owner = THIS_MODULE, @@ -1933,6 +1944,7 @@ struct proto tcpv6_prot = { #ifdef CONFIG_MEMCG_KMEM .proto_cgroup = tcp_proto_cgroup, #endif + .clear_sk = tcp_v6_clear_sk, }; static const struct inet6_protocol tcpv6_protocol = { diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index d4defdd44937..42923b14dfa6 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -1432,6 +1432,17 @@ void udp6_proc_exit(struct net *net) { } #endif /* CONFIG_PROC_FS */ +void udp_v6_clear_sk(struct sock *sk, int size) +{ + struct inet_sock *inet = inet_sk(sk); + + /* we do not want to clear pinet6 field, because of RCU lookups */ + sk_prot_clear_portaddr_nulls(sk, offsetof(struct inet_sock, pinet6)); + + size -= offsetof(struct inet_sock, pinet6) + sizeof(inet->pinet6); + memset(&inet->pinet6 + 1, 0, size); +} + /* ------------------------------------------------------------------------ */ struct proto udpv6_prot = { @@ -1462,7 +1473,7 @@ struct proto udpv6_prot = { .compat_setsockopt = compat_udpv6_setsockopt, .compat_getsockopt = compat_udpv6_getsockopt, #endif - .clear_sk = sk_prot_clear_portaddr_nulls, + .clear_sk = udp_v6_clear_sk, }; static struct inet_protosw udpv6_protosw = { diff --git a/net/ipv6/udp_impl.h b/net/ipv6/udp_impl.h index d7571046bfc4..4691ed50a928 100644 --- a/net/ipv6/udp_impl.h +++ b/net/ipv6/udp_impl.h @@ -31,6 +31,8 @@ extern int udpv6_recvmsg(struct kiocb *iocb, struct sock *sk, extern int udpv6_queue_rcv_skb(struct sock * sk, struct sk_buff *skb); extern void udpv6_destroy_sock(struct sock *sk); +extern void udp_v6_clear_sk(struct sock *sk, int size); + #ifdef CONFIG_PROC_FS extern int udp6_seq_show(struct seq_file *seq, void *v); #endif diff --git a/net/ipv6/udplite.c b/net/ipv6/udplite.c index 1d08e21d9f69..dfcc4be46898 100644 --- a/net/ipv6/udplite.c +++ b/net/ipv6/udplite.c @@ -56,7 +56,7 @@ struct proto udplitev6_prot = { .compat_setsockopt = compat_udpv6_setsockopt, .compat_getsockopt = compat_udpv6_getsockopt, #endif - .clear_sk = sk_prot_clear_portaddr_nulls, + .clear_sk = udp_v6_clear_sk, }; static struct inet_protosw udplite6_protosw = { -- cgit v1.2.3 From 0a3b15ac3cc3ddc791901e12bdc930b5fa11a30a Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 2 May 2013 21:54:37 +0200 Subject: ACPI / PM: Move processor suspend/resume to syscore_ops The system suspend routine of the ACPI processor driver saves the BUS_MASTER_RLD register and its resume routine restores it. However, there can be only one such register in the system and it really should be saved after non-boot CPUs have been offlined and restored before they are put back online during resume. For this reason, move the saving and restoration of BUS_MASTER_RLD to syscore suspend and syscore resume, respectively, and drop the no longer necessary suspend/resume callbacks from the ACPI processor driver. Signed-off-by: Rafael J. Wysocki --- drivers/acpi/processor_driver.c | 8 ++++---- drivers/acpi/processor_idle.c | 29 +++++++++++++++++++---------- include/acpi/processor.h | 10 ++++++++-- 3 files changed, 31 insertions(+), 16 deletions(-) (limited to 'include') diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index bec717ffd25f..c266cdc11784 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -95,9 +95,6 @@ static const struct acpi_device_id processor_device_ids[] = { }; MODULE_DEVICE_TABLE(acpi, processor_device_ids); -static SIMPLE_DEV_PM_OPS(acpi_processor_pm, - acpi_processor_suspend, acpi_processor_resume); - static struct acpi_driver acpi_processor_driver = { .name = "processor", .class = ACPI_PROCESSOR_CLASS, @@ -107,7 +104,6 @@ static struct acpi_driver acpi_processor_driver = { .remove = acpi_processor_remove, .notify = acpi_processor_notify, }, - .drv.pm = &acpi_processor_pm, }; #define INSTALL_NOTIFY_HANDLER 1 @@ -934,6 +930,8 @@ static int __init acpi_processor_init(void) if (result < 0) return result; + acpi_processor_syscore_init(); + acpi_processor_install_hotplug_notify(); acpi_thermal_cpufreq_init(); @@ -956,6 +954,8 @@ static void __exit acpi_processor_exit(void) acpi_processor_uninstall_hotplug_notify(); + acpi_processor_syscore_exit(); + acpi_bus_unregister_driver(&acpi_processor_driver); return; diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index f0df2c9434d2..eb133c77aadb 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -34,6 +34,7 @@ #include /* need_resched() */ #include #include +#include /* * Include the apic definitions for x86 to have the APIC timer related defines @@ -210,33 +211,41 @@ static void lapic_timer_state_broadcast(struct acpi_processor *pr, #endif +#ifdef CONFIG_PM_SLEEP static u32 saved_bm_rld; -static void acpi_idle_bm_rld_save(void) +int acpi_processor_suspend(void) { acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &saved_bm_rld); + return 0; } -static void acpi_idle_bm_rld_restore(void) + +void acpi_processor_resume(void) { u32 resumed_bm_rld; acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &resumed_bm_rld); + if (resumed_bm_rld == saved_bm_rld) + return; - if (resumed_bm_rld != saved_bm_rld) - acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld); + acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld); } -int acpi_processor_suspend(struct device *dev) +static struct syscore_ops acpi_processor_syscore_ops = { + .suspend = acpi_processor_suspend, + .resume = acpi_processor_resume, +}; + +void acpi_processor_syscore_init(void) { - acpi_idle_bm_rld_save(); - return 0; + register_syscore_ops(&acpi_processor_syscore_ops); } -int acpi_processor_resume(struct device *dev) +void acpi_processor_syscore_exit(void) { - acpi_idle_bm_rld_restore(); - return 0; + unregister_syscore_ops(&acpi_processor_syscore_ops); } +#endif /* CONFIG_PM_SLEEP */ #if defined(CONFIG_X86) static void tsc_check_state(int state) diff --git a/include/acpi/processor.h b/include/acpi/processor.h index b327b5a9296d..ea69367fdd3b 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -329,10 +329,16 @@ int acpi_processor_power_init(struct acpi_processor *pr); int acpi_processor_power_exit(struct acpi_processor *pr); int acpi_processor_cst_has_changed(struct acpi_processor *pr); int acpi_processor_hotplug(struct acpi_processor *pr); -int acpi_processor_suspend(struct device *dev); -int acpi_processor_resume(struct device *dev); extern struct cpuidle_driver acpi_idle_driver; +#ifdef CONFIG_PM_SLEEP +void acpi_processor_syscore_init(void); +void acpi_processor_syscore_exit(void); +#else +static inline void acpi_processor_syscore_init(void) {} +static inline void acpi_processor_syscore_exit(void) {} +#endif + /* in processor_thermal.c */ int acpi_processor_get_limit_info(struct acpi_processor *pr); extern const struct thermal_cooling_device_ops processor_cooling_ops; -- cgit v1.2.3 From 36200af867e2cf5adc1ff77214b2524f6111736f Mon Sep 17 00:00:00 2001 From: Jan-Simon Möller Date: Tue, 30 Apr 2013 09:39:04 +0000 Subject: ACPI: Fix section to __init. Align with usage in acpixf.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes warning during compilation with clang. [rjw: Subject and changelog] Signed-off-by: Jan-Simon Möller Signed-off-by: Rafael J. Wysocki --- include/acpi/acpiosxf.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h index 5b3d2bd4813a..64b8c7639520 100644 --- a/include/acpi/acpiosxf.h +++ b/include/acpi/acpiosxf.h @@ -77,7 +77,7 @@ struct acpi_signal_fatal_info { /* * OSL Initialization and shutdown primitives */ -acpi_status __initdata acpi_os_initialize(void); +acpi_status __init acpi_os_initialize(void); acpi_status acpi_os_terminate(void); -- cgit v1.2.3 From 95643359f8b31e74b35901f4e36cd069cd67fd48 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 13 May 2013 15:23:49 +1000 Subject: drm: remove unused wrapper macros We don't use these anymore so nuke them. Signed-off-by: Dave Airlie --- include/drm/drm_os_linux.h | 9 --------- 1 file changed, 9 deletions(-) (limited to 'include') diff --git a/include/drm/drm_os_linux.h b/include/drm/drm_os_linux.h index 393369147a2d..675ddf4b441f 100644 --- a/include/drm/drm_os_linux.h +++ b/include/drm/drm_os_linux.h @@ -87,15 +87,6 @@ static __inline__ int mtrr_del(int reg, unsigned long base, unsigned long size) /** Other copying of data from kernel space */ #define DRM_COPY_TO_USER(arg1, arg2, arg3) \ copy_to_user(arg1, arg2, arg3) -/* Macros for copyfrom user, but checking readability only once */ -#define DRM_VERIFYAREA_READ( uaddr, size ) \ - (access_ok( VERIFY_READ, uaddr, size ) ? 0 : -EFAULT) -#define DRM_COPY_FROM_USER_UNCHECKED(arg1, arg2, arg3) \ - __copy_from_user(arg1, arg2, arg3) -#define DRM_COPY_TO_USER_UNCHECKED(arg1, arg2, arg3) \ - __copy_to_user(arg1, arg2, arg3) -#define DRM_GET_USER_UNCHECKED(val, uaddr) \ - __get_user(val, uaddr) #define DRM_HZ HZ -- cgit v1.2.3 From e2555fde4159467fb579e6ae3c0a8fc33015d0f5 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 13 May 2013 09:45:01 -0400 Subject: jbd,jbd2: fix oops in jbd2_journal_put_journal_head() Commit ae4647fb (jbd2: reduce journal_head size) introduced a regression where we occasionally hit panic in jbd2_journal_put_journal_head() because of wrong b_jcount. The bug is caused by gcc making 64-bit access to 32-bit bitfield and thus clobbering b_jcount. At least for now, those 8 bytes saved in struct journal_head are not worth the trouble with gcc bitfield handling so revert that part of the patch. Reported-by: EUNBONG SONG Reported-by: Tony Luck Signed-off-by: Jan Kara Signed-off-by: "Theodore Ts'o" --- include/linux/journal-head.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/journal-head.h b/include/linux/journal-head.h index 13a3da25ff07..98cd41bb39c8 100644 --- a/include/linux/journal-head.h +++ b/include/linux/journal-head.h @@ -30,15 +30,19 @@ struct journal_head { /* * Journalling list for this buffer [jbd_lock_bh_state()] + * NOTE: We *cannot* combine this with b_modified into a bitfield + * as gcc would then (which the C standard allows but which is + * very unuseful) make 64-bit accesses to the bitfield and clobber + * b_jcount if its update races with bitfield modification. */ - unsigned b_jlist:4; + unsigned b_jlist; /* * This flag signals the buffer has been modified by * the currently running transaction * [jbd_lock_bh_state()] */ - unsigned b_modified:1; + unsigned b_modified; /* * Copy of the buffer data frozen for writing to the log. -- cgit v1.2.3 From ee8209fd026b074bb8eb75bece516a338a281b1b Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 8 May 2013 11:55:48 +0300 Subject: dma: acpi-dma: parse CSRT to extract additional resources Since we have CSRT only to get additional DMA controller resources, let's get rid of drivers/acpi/csrt.c and move its logic inside ACPI DMA helpers code. Signed-off-by: Andy Shevchenko Signed-off-by: Mika Westerberg Acked-by: Rafael J. Wysocki Signed-off-by: Vinod Koul --- drivers/acpi/Makefile | 1 - drivers/acpi/csrt.c | 159 ------------------------------------------- drivers/acpi/internal.h | 1 - drivers/acpi/scan.c | 1 - drivers/dma/acpi-dma.c | 172 ++++++++++++++++++++++++++++++++++++++++++++++- include/linux/acpi_dma.h | 4 ++ 6 files changed, 173 insertions(+), 165 deletions(-) delete mode 100644 drivers/acpi/csrt.c (limited to 'include') diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index ecb743bf05a5..6050c8028dce 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -38,7 +38,6 @@ acpi-y += processor_core.o acpi-y += ec.o acpi-$(CONFIG_ACPI_DOCK) += dock.o acpi-y += pci_root.o pci_link.o pci_irq.o -acpi-y += csrt.o acpi-$(CONFIG_X86_INTEL_LPSS) += acpi_lpss.o acpi-y += acpi_platform.o acpi-y += power.o diff --git a/drivers/acpi/csrt.c b/drivers/acpi/csrt.c deleted file mode 100644 index 5c15a91faf0b..000000000000 --- a/drivers/acpi/csrt.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * Support for Core System Resources Table (CSRT) - * - * Copyright (C) 2013, Intel Corporation - * Authors: Mika Westerberg - * Andy Shevchenko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#define pr_fmt(fmt) "ACPI: CSRT: " fmt - -#include -#include -#include -#include -#include -#include - -ACPI_MODULE_NAME("CSRT"); - -static int __init acpi_csrt_parse_shared_info(struct platform_device *pdev, - const struct acpi_csrt_group *grp) -{ - const struct acpi_csrt_shared_info *si; - struct resource res[3]; - size_t nres; - int ret; - - memset(res, 0, sizeof(res)); - nres = 0; - - si = (const struct acpi_csrt_shared_info *)&grp[1]; - /* - * The peripherals that are listed on CSRT typically support only - * 32-bit addresses so we only use the low part of MMIO base for - * now. - */ - if (!si->mmio_base_high && si->mmio_base_low) { - /* - * There is no size of the memory resource in shared_info - * so we assume that it is 4k here. - */ - res[nres].start = si->mmio_base_low; - res[nres].end = res[0].start + SZ_4K - 1; - res[nres++].flags = IORESOURCE_MEM; - } - - if (si->gsi_interrupt) { - int irq = acpi_register_gsi(NULL, si->gsi_interrupt, - si->interrupt_mode, - si->interrupt_polarity); - res[nres].start = irq; - res[nres].end = irq; - res[nres++].flags = IORESOURCE_IRQ; - } - - if (si->base_request_line || si->num_handshake_signals) { - /* - * We pass the driver a DMA resource describing the range - * of request lines the device supports. - */ - res[nres].start = si->base_request_line; - res[nres].end = res[nres].start + si->num_handshake_signals - 1; - res[nres++].flags = IORESOURCE_DMA; - } - - ret = platform_device_add_resources(pdev, res, nres); - if (ret) { - if (si->gsi_interrupt) - acpi_unregister_gsi(si->gsi_interrupt); - return ret; - } - - return 0; -} - -static int __init -acpi_csrt_parse_resource_group(const struct acpi_csrt_group *grp) -{ - struct platform_device *pdev; - char vendor[5], name[16]; - int ret, i; - - vendor[0] = grp->vendor_id; - vendor[1] = grp->vendor_id >> 8; - vendor[2] = grp->vendor_id >> 16; - vendor[3] = grp->vendor_id >> 24; - vendor[4] = '\0'; - - if (grp->shared_info_length != sizeof(struct acpi_csrt_shared_info)) - return -ENODEV; - - snprintf(name, sizeof(name), "%s%04X", vendor, grp->device_id); - pdev = platform_device_alloc(name, PLATFORM_DEVID_AUTO); - if (!pdev) - return -ENOMEM; - - /* Add resources based on the shared info */ - ret = acpi_csrt_parse_shared_info(pdev, grp); - if (ret) - goto fail; - - ret = platform_device_add(pdev); - if (ret) - goto fail; - - for (i = 0; i < pdev->num_resources; i++) - dev_dbg(&pdev->dev, "%pR\n", &pdev->resource[i]); - - return 0; - -fail: - platform_device_put(pdev); - return ret; -} - -/* - * CSRT or Core System Resources Table is a proprietary ACPI table - * introduced by Microsoft. This table can contain devices that are not in - * the system DSDT table. In particular DMA controllers might be described - * here. - * - * We present these devices as normal platform devices that don't have ACPI - * IDs or handle. The platform device name will be something like - * ..auto for example: INTL9C06.0.auto. - */ -void __init acpi_csrt_init(void) -{ - struct acpi_csrt_group *grp, *end; - struct acpi_table_csrt *csrt; - acpi_status status; - int ret; - - status = acpi_get_table(ACPI_SIG_CSRT, 0, - (struct acpi_table_header **)&csrt); - if (ACPI_FAILURE(status)) { - if (status != AE_NOT_FOUND) - pr_warn("failed to get the CSRT table\n"); - return; - } - - pr_debug("parsing CSRT table for devices\n"); - - grp = (struct acpi_csrt_group *)(csrt + 1); - end = (struct acpi_csrt_group *)((void *)csrt + csrt->header.length); - - while (grp < end) { - ret = acpi_csrt_parse_resource_group(grp); - if (ret) { - pr_warn("error in parsing resource group: %d\n", ret); - return; - } - - grp = (struct acpi_csrt_group *)((void *)grp + grp->length); - } -} diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index 6f1afd9118c8..297cbf456f86 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -35,7 +35,6 @@ void acpi_pci_link_init(void); void acpi_pci_root_hp_init(void); void acpi_platform_init(void); int acpi_sysfs_init(void); -void acpi_csrt_init(void); #ifdef CONFIG_ACPI_CONTAINER void acpi_container_init(void); #else diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index fe158fd4f1df..aacc08f951aa 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -2042,7 +2042,6 @@ int __init acpi_scan_init(void) acpi_pci_link_init(); acpi_platform_init(); acpi_lpss_init(); - acpi_csrt_init(); acpi_container_init(); acpi_memory_hotplug_init(); diff --git a/drivers/dma/acpi-dma.c b/drivers/dma/acpi-dma.c index ba6fc62e9651..5a18f82f732a 100644 --- a/drivers/dma/acpi-dma.c +++ b/drivers/dma/acpi-dma.c @@ -4,7 +4,8 @@ * Based on of-dma.c * * Copyright (C) 2013, Intel Corporation - * Author: Andy Shevchenko + * Authors: Andy Shevchenko + * Mika Westerberg * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -16,12 +17,124 @@ #include #include #include +#include #include #include static LIST_HEAD(acpi_dma_list); static DEFINE_MUTEX(acpi_dma_lock); +/** + * acpi_dma_parse_resource_group - match device and parse resource group + * @grp: CSRT resource group + * @adev: ACPI device to match with + * @adma: struct acpi_dma of the given DMA controller + * + * Returns 1 on success, 0 when no information is available, or appropriate + * errno value on error. + * + * In order to match a device from DSDT table to the corresponding CSRT device + * we use MMIO address and IRQ. + */ +static int acpi_dma_parse_resource_group(const struct acpi_csrt_group *grp, + struct acpi_device *adev, struct acpi_dma *adma) +{ + const struct acpi_csrt_shared_info *si; + struct list_head resource_list; + struct resource_list_entry *rentry; + resource_size_t mem = 0, irq = 0; + u32 vendor_id; + int ret; + + if (grp->shared_info_length != sizeof(struct acpi_csrt_shared_info)) + return -ENODEV; + + INIT_LIST_HEAD(&resource_list); + ret = acpi_dev_get_resources(adev, &resource_list, NULL, NULL); + if (ret <= 0) + return 0; + + list_for_each_entry(rentry, &resource_list, node) { + if (resource_type(&rentry->res) == IORESOURCE_MEM) + mem = rentry->res.start; + else if (resource_type(&rentry->res) == IORESOURCE_IRQ) + irq = rentry->res.start; + } + + acpi_dev_free_resource_list(&resource_list); + + /* Consider initial zero values as resource not found */ + if (mem == 0 && irq == 0) + return 0; + + si = (const struct acpi_csrt_shared_info *)&grp[1]; + + /* Match device by MMIO and IRQ */ + if (si->mmio_base_low != mem || si->gsi_interrupt != irq) + return 0; + + vendor_id = le32_to_cpu(grp->vendor_id); + dev_dbg(&adev->dev, "matches with %.4s%04X (rev %u)\n", + (char *)&vendor_id, grp->device_id, grp->revision); + + /* Check if the request line range is available */ + if (si->base_request_line == 0 && si->num_handshake_signals == 0) + return 0; + + adma->base_request_line = si->base_request_line; + adma->end_request_line = si->base_request_line + + si->num_handshake_signals - 1; + + dev_dbg(&adev->dev, "request line base: 0x%04x end: 0x%04x\n", + adma->base_request_line, adma->end_request_line); + + return 1; +} + +/** + * acpi_dma_parse_csrt - parse CSRT to exctract additional DMA resources + * @adev: ACPI device to match with + * @adma: struct acpi_dma of the given DMA controller + * + * CSRT or Core System Resources Table is a proprietary ACPI table + * introduced by Microsoft. This table can contain devices that are not in + * the system DSDT table. In particular DMA controllers might be described + * here. + * + * We are using this table to get the request line range of the specific DMA + * controller to be used later. + * + */ +static void acpi_dma_parse_csrt(struct acpi_device *adev, struct acpi_dma *adma) +{ + struct acpi_csrt_group *grp, *end; + struct acpi_table_csrt *csrt; + acpi_status status; + int ret; + + status = acpi_get_table(ACPI_SIG_CSRT, 0, + (struct acpi_table_header **)&csrt); + if (ACPI_FAILURE(status)) { + if (status != AE_NOT_FOUND) + dev_warn(&adev->dev, "failed to get the CSRT table\n"); + return; + } + + grp = (struct acpi_csrt_group *)(csrt + 1); + end = (struct acpi_csrt_group *)((void *)csrt + csrt->header.length); + + while (grp < end) { + ret = acpi_dma_parse_resource_group(grp, adev, adma); + if (ret < 0) { + dev_warn(&adev->dev, + "error in parsing resource group\n"); + return; + } + + grp = (struct acpi_csrt_group *)((void *)grp + grp->length); + } +} + /** * acpi_dma_controller_register - Register a DMA controller to ACPI DMA helpers * @dev: struct device of DMA controller @@ -61,6 +174,8 @@ int acpi_dma_controller_register(struct device *dev, adma->acpi_dma_xlate = acpi_dma_xlate; adma->data = data; + acpi_dma_parse_csrt(adev, adma); + /* Now queue acpi_dma controller structure in list */ mutex_lock(&acpi_dma_lock); list_add_tail(&adma->dma_controllers, &acpi_dma_list); @@ -149,6 +264,45 @@ void devm_acpi_dma_controller_free(struct device *dev) } EXPORT_SYMBOL_GPL(devm_acpi_dma_controller_free); +/** + * acpi_dma_update_dma_spec - prepare dma specifier to pass to translation function + * @adma: struct acpi_dma of DMA controller + * @dma_spec: dma specifier to update + * + * Returns 0, if no information is avaiable, -1 on mismatch, and 1 otherwise. + * + * Accordingly to ACPI 5.0 Specification Table 6-170 "Fixed DMA Resource + * Descriptor": + * DMA Request Line bits is a platform-relative number uniquely + * identifying the request line assigned. Request line-to-Controller + * mapping is done in a controller-specific OS driver. + * That's why we can safely adjust slave_id when the appropriate controller is + * found. + */ +static int acpi_dma_update_dma_spec(struct acpi_dma *adma, + struct acpi_dma_spec *dma_spec) +{ + /* Set link to the DMA controller device */ + dma_spec->dev = adma->dev; + + /* Check if the request line range is available */ + if (adma->base_request_line == 0 && adma->end_request_line == 0) + return 0; + + /* Check if slave_id falls to the range */ + if (dma_spec->slave_id < adma->base_request_line || + dma_spec->slave_id > adma->end_request_line) + return -1; + + /* + * Here we adjust slave_id. It should be a relative number to the base + * request line. + */ + dma_spec->slave_id -= adma->base_request_line; + + return 1; +} + struct acpi_dma_parser_data { struct acpi_dma_spec dma_spec; size_t index; @@ -193,6 +347,7 @@ struct dma_chan *acpi_dma_request_slave_chan_by_index(struct device *dev, struct acpi_device *adev; struct acpi_dma *adma; struct dma_chan *chan = NULL; + int found; /* Check if the device was enumerated by ACPI */ if (!dev || !ACPI_HANDLE(dev)) @@ -219,9 +374,20 @@ struct dma_chan *acpi_dma_request_slave_chan_by_index(struct device *dev, mutex_lock(&acpi_dma_lock); list_for_each_entry(adma, &acpi_dma_list, dma_controllers) { - dma_spec->dev = adma->dev; + /* + * We are not going to call translation function if slave_id + * doesn't fall to the request range. + */ + found = acpi_dma_update_dma_spec(adma, dma_spec); + if (found < 0) + continue; chan = adma->acpi_dma_xlate(dma_spec, adma); - if (chan) + /* + * Try to get a channel only from the DMA controller that + * matches the slave_id. See acpi_dma_update_dma_spec() + * description for the details. + */ + if (found > 0 || chan) break; } diff --git a/include/linux/acpi_dma.h b/include/linux/acpi_dma.h index d09deabc7bf6..fb0298082916 100644 --- a/include/linux/acpi_dma.h +++ b/include/linux/acpi_dma.h @@ -37,6 +37,8 @@ struct acpi_dma_spec { * @dev: struct device of this controller * @acpi_dma_xlate: callback function to find a suitable channel * @data: private data used by a callback function + * @base_request_line: first supported request line (CSRT) + * @end_request_line: last supported request line (CSRT) */ struct acpi_dma { struct list_head dma_controllers; @@ -44,6 +46,8 @@ struct acpi_dma { struct dma_chan *(*acpi_dma_xlate) (struct acpi_dma_spec *, struct acpi_dma *); void *data; + unsigned short base_request_line; + unsigned short end_request_line; }; /* Used with acpi_dma_simple_xlate() */ -- cgit v1.2.3 From b59cc200ac025aca597fb21862c1c9e667f2eff2 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 8 May 2013 11:55:49 +0300 Subject: ACPI / LPSS: register clock device for Lynxpoint DMA properly The DMA controller in Lynxpoint is enumerated as a regular ACPI device now. To work properly it is using the LPSS root clock as a functional clock. That's why we have to register the clock device accordingly to the ACPI ID of the DMA controller. The acpi_lpss.c module is responsible to do the job. This patch also removes hardcoded name of the DMA device in clk-lpt.c and the name of the root clock in acpi_lpss.c. Signed-off-by: Rafael J. Wysocki Signed-off-by: Andy Shevchenko Signed-off-by: Vinod Koul --- drivers/acpi/acpi_lpss.c | 26 ++++++++++++++++++++++---- drivers/clk/x86/clk-lpt.c | 15 +++++++++++---- include/linux/platform_data/clk-lpss.h | 5 +++++ 3 files changed, 38 insertions(+), 8 deletions(-) (limited to 'include') diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c index b1c95422ce74..652fd5ce303c 100644 --- a/drivers/acpi/acpi_lpss.c +++ b/drivers/acpi/acpi_lpss.c @@ -35,11 +35,16 @@ ACPI_MODULE_NAME("acpi_lpss"); struct lpss_device_desc { bool clk_required; - const char *clk_parent; + const char *clkdev_name; bool ltr_required; unsigned int prv_offset; }; +static struct lpss_device_desc lpss_dma_desc = { + .clk_required = true, + .clkdev_name = "hclk", +}; + struct lpss_private_data { void __iomem *mmio_base; resource_size_t mmio_size; @@ -49,7 +54,6 @@ struct lpss_private_data { static struct lpss_device_desc lpt_dev_desc = { .clk_required = true, - .clk_parent = "lpss_clk", .prv_offset = 0x800, .ltr_required = true, }; @@ -60,6 +64,9 @@ static struct lpss_device_desc lpt_sdio_dev_desc = { }; static const struct acpi_device_id acpi_lpss_device_ids[] = { + /* Generic LPSS devices */ + { "INTL9C60", (unsigned long)&lpss_dma_desc }, + /* Lynxpoint LPSS devices */ { "INT33C0", (unsigned long)&lpt_dev_desc }, { "INT33C1", (unsigned long)&lpt_dev_desc }, @@ -91,16 +98,27 @@ static int register_device_clock(struct acpi_device *adev, struct lpss_private_data *pdata) { const struct lpss_device_desc *dev_desc = pdata->dev_desc; + struct lpss_clk_data *clk_data; if (!lpss_clk_dev) lpt_register_clock_device(); - if (!dev_desc->clk_parent || !pdata->mmio_base + clk_data = platform_get_drvdata(lpss_clk_dev); + if (!clk_data) + return -ENODEV; + + if (dev_desc->clkdev_name) { + clk_register_clkdev(clk_data->clk, dev_desc->clkdev_name, + dev_name(&adev->dev)); + return 0; + } + + if (!pdata->mmio_base || pdata->mmio_size < dev_desc->prv_offset + LPSS_CLK_SIZE) return -ENODATA; pdata->clk = clk_register_gate(NULL, dev_name(&adev->dev), - dev_desc->clk_parent, 0, + clk_data->name, 0, pdata->mmio_base + dev_desc->prv_offset, 0, 0, NULL); if (IS_ERR(pdata->clk)) diff --git a/drivers/clk/x86/clk-lpt.c b/drivers/clk/x86/clk-lpt.c index 5cf4f4686406..4f45eee9e33b 100644 --- a/drivers/clk/x86/clk-lpt.c +++ b/drivers/clk/x86/clk-lpt.c @@ -15,22 +15,29 @@ #include #include #include +#include #include #define PRV_CLOCK_PARAMS 0x800 static int lpt_clk_probe(struct platform_device *pdev) { + struct lpss_clk_data *drvdata; struct clk *clk; + drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL); + if (!drvdata) + return -ENOMEM; + /* LPSS free running clock */ - clk = clk_register_fixed_rate(&pdev->dev, "lpss_clk", NULL, CLK_IS_ROOT, - 100000000); + drvdata->name = "lpss_clk"; + clk = clk_register_fixed_rate(&pdev->dev, drvdata->name, NULL, + CLK_IS_ROOT, 100000000); if (IS_ERR(clk)) return PTR_ERR(clk); - /* Shared DMA clock */ - clk_register_clkdev(clk, "hclk", "INTL9C60.0.auto"); + drvdata->clk = clk; + platform_set_drvdata(pdev, drvdata); return 0; } diff --git a/include/linux/platform_data/clk-lpss.h b/include/linux/platform_data/clk-lpss.h index 528e73ce46d2..23901992b9dd 100644 --- a/include/linux/platform_data/clk-lpss.h +++ b/include/linux/platform_data/clk-lpss.h @@ -13,6 +13,11 @@ #ifndef __CLK_LPSS_H #define __CLK_LPSS_H +struct lpss_clk_data { + const char *name; + struct clk *clk; +}; + extern int lpt_clk_init(void); #endif /* __CLK_LPSS_H */ -- cgit v1.2.3 From 63ad9cbff5896dadfee510f631ffcb0176984722 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 23 Apr 2013 15:28:38 +0200 Subject: pinctrl: generic: Fix typos and clarify comments Drive strength controls both sink and source currents, clarify the description accordingly. Signed-off-by: Laurent Pinchart Signed-off-by: Linus Walleij --- include/linux/pinctrl/pinconf-generic.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index 72474e18f1e0..6aa238096622 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -37,17 +37,17 @@ * if it is 0, pull-down is disabled. * @PIN_CONFIG_DRIVE_PUSH_PULL: the pin will be driven actively high and * low, this is the most typical case and is typically achieved with two - * active transistors on the output. Sending this config will enabale + * active transistors on the output. Setting this config will enable * push-pull mode, the argument is ignored. * @PIN_CONFIG_DRIVE_OPEN_DRAIN: the pin will be driven with open drain (open * collector) which means it is usually wired with other output ports - * which are then pulled up with an external resistor. Sending this - * config will enabale open drain mode, the argument is ignored. + * which are then pulled up with an external resistor. Setting this + * config will enable open drain mode, the argument is ignored. * @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source - * (open emitter). Sending this config will enabale open drain mode, the + * (open emitter). Setting this config will enable open drain mode, the * argument is ignored. - * @PIN_CONFIG_DRIVE_STRENGTH: the pin will output the current passed as - * argument. The argument is in mA. + * @PIN_CONFIG_DRIVE_STRENGTH: the pin will sink or source at most the current + * passed as argument. The argument is in mA. * @PIN_CONFIG_INPUT_SCHMITT_ENABLE: control schmitt-trigger mode on the pin. * If the argument != 0, schmitt-trigger mode is enabled. If it's 0, * schmitt-trigger mode is disabled. -- cgit v1.2.3 From b4f711ee03d28f776fd2324fd0bd999cc428e4d2 Mon Sep 17 00:00:00 2001 From: John Stultz Date: Wed, 24 Apr 2013 11:32:56 -0700 Subject: time: Revert ALWAYS_USE_PERSISTENT_CLOCK compile time optimizaitons Kay Sievers noted that the ALWAYS_USE_PERSISTENT_CLOCK config, which enables some minor compile time optimization to avoid uncessary code in mostly the suspend/resume path could cause problems for userland. In particular, the dependency for RTC_HCTOSYS on !ALWAYS_USE_PERSISTENT_CLOCK, which avoids setting the time twice and simplifies suspend/resume, has the side effect of causing the /sys/class/rtc/rtcN/hctosys flag to always be zero, and this flag is commonly used by udev to setup the /dev/rtc symlink to /dev/rtcN, which can cause pain for older applications. While the udev rules could use some work to be less fragile, breaking userland should strongly be avoided. Additionally the compile time optimizations are fairly minor, and the code being optimized is likely to be reworked in the future, so lets revert this change. Reported-by: Kay Sievers Signed-off-by: John Stultz Cc: stable #3.9 Cc: Feng Tang Cc: Jason Gunthorpe Link: http://lkml.kernel.org/r/1366828376-18124-1-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig | 1 - drivers/rtc/Kconfig | 2 -- include/linux/time.h | 4 ---- kernel/time/Kconfig | 5 ----- 4 files changed, 12 deletions(-) (limited to 'include') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 5db2117ae288..45c41249321f 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -108,7 +108,6 @@ config X86 select GENERIC_CLOCKEVENTS_BROADCAST if X86_64 || (X86_32 && X86_LOCAL_APIC) select GENERIC_TIME_VSYSCALL if X86_64 select KTIME_SCALAR if X86_32 - select ALWAYS_USE_PERSISTENT_CLOCK select GENERIC_STRNCPY_FROM_USER select GENERIC_STRNLEN_USER select HAVE_CONTEXT_TRACKING if X86_64 diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 0c81915b1997..b9838130a7b0 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -20,7 +20,6 @@ if RTC_CLASS config RTC_HCTOSYS bool "Set system time from RTC on startup and resume" default y - depends on !ALWAYS_USE_PERSISTENT_CLOCK help If you say yes here, the system time (wall clock) will be set using the value read from a specified RTC device. This is useful to avoid @@ -29,7 +28,6 @@ config RTC_HCTOSYS config RTC_SYSTOHC bool "Set the RTC time based on NTP synchronization" default y - depends on !ALWAYS_USE_PERSISTENT_CLOCK help If you say yes here, the system time (wall clock) will be stored in the RTC specified by RTC_HCTOSYS_DEVICE approximately every 11 diff --git a/include/linux/time.h b/include/linux/time.h index 22d81b3c955b..d5d229b2e5af 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -117,14 +117,10 @@ static inline bool timespec_valid_strict(const struct timespec *ts) extern bool persistent_clock_exist; -#ifdef ALWAYS_USE_PERSISTENT_CLOCK -#define has_persistent_clock() true -#else static inline bool has_persistent_clock(void) { return persistent_clock_exist; } -#endif extern void read_persistent_clock(struct timespec *ts); extern void read_boot_clock(struct timespec *ts); diff --git a/kernel/time/Kconfig b/kernel/time/Kconfig index 24510d84efd7..b69692250af4 100644 --- a/kernel/time/Kconfig +++ b/kernel/time/Kconfig @@ -12,11 +12,6 @@ config CLOCKSOURCE_WATCHDOG config ARCH_CLOCKSOURCE_DATA bool -# Platforms has a persistent clock -config ALWAYS_USE_PERSISTENT_CLOCK - bool - default n - # Timekeeping vsyscall support config GENERIC_TIME_VSYSCALL bool -- cgit v1.2.3 From a1321ddd27e65c6ada5b9a12cae4ee2612d76893 Mon Sep 17 00:00:00 2001 From: Joern Engel Date: Mon, 13 May 2013 16:30:05 -0400 Subject: target: removed unused transport_state flag Signed-off-by: Joern Engel Signed-off-by: Nicholas Bellinger --- include/target/target_core_base.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 136b7b2f7b32..e773dfa5f98f 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -463,7 +463,6 @@ struct se_cmd { #define CMD_T_ABORTED (1 << 0) #define CMD_T_ACTIVE (1 << 1) #define CMD_T_COMPLETE (1 << 2) -#define CMD_T_QUEUED (1 << 3) #define CMD_T_SENT (1 << 4) #define CMD_T_STOP (1 << 5) #define CMD_T_FAILED (1 << 6) -- cgit v1.2.3 From ccf5ae83a6cf3d9cfe9a7038bfe7cd38ab03d5e1 Mon Sep 17 00:00:00 2001 From: Joern Engel Date: Mon, 13 May 2013 16:30:06 -0400 Subject: target: close target_put_sess_cmd() vs. core_tmr_abort_task() race It is possible for one thread to to take se_sess->sess_cmd_lock in core_tmr_abort_task() before taking a reference count on se_cmd->cmd_kref, while another thread in target_put_sess_cmd() drops se_cmd->cmd_kref before taking se_sess->sess_cmd_lock. This introduces kref_put_spinlock_irqsave() and uses it in target_put_sess_cmd() to close the race window. Signed-off-by: Joern Engel Acked-by: Greg Kroah-Hartman Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 11 +++++------ include/linux/kref.h | 33 +++++++++++++++++++++++++++++++++ 2 files changed, 38 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index c3477fa60942..4a793362309d 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2211,21 +2211,19 @@ static void target_release_cmd_kref(struct kref *kref) { struct se_cmd *se_cmd = container_of(kref, struct se_cmd, cmd_kref); struct se_session *se_sess = se_cmd->se_sess; - unsigned long flags; - spin_lock_irqsave(&se_sess->sess_cmd_lock, flags); if (list_empty(&se_cmd->se_cmd_list)) { - spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags); + spin_unlock(&se_sess->sess_cmd_lock); se_cmd->se_tfo->release_cmd(se_cmd); return; } if (se_sess->sess_tearing_down && se_cmd->cmd_wait_set) { - spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags); + spin_unlock(&se_sess->sess_cmd_lock); complete(&se_cmd->cmd_wait_comp); return; } list_del(&se_cmd->se_cmd_list); - spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags); + spin_unlock(&se_sess->sess_cmd_lock); se_cmd->se_tfo->release_cmd(se_cmd); } @@ -2236,7 +2234,8 @@ static void target_release_cmd_kref(struct kref *kref) */ int target_put_sess_cmd(struct se_session *se_sess, struct se_cmd *se_cmd) { - return kref_put(&se_cmd->cmd_kref, target_release_cmd_kref); + return kref_put_spinlock_irqsave(&se_cmd->cmd_kref, target_release_cmd_kref, + &se_sess->sess_cmd_lock); } EXPORT_SYMBOL(target_put_sess_cmd); diff --git a/include/linux/kref.h b/include/linux/kref.h index 4972e6e9ca93..7419c02085d7 100644 --- a/include/linux/kref.h +++ b/include/linux/kref.h @@ -19,6 +19,7 @@ #include #include #include +#include struct kref { atomic_t refcount; @@ -95,6 +96,38 @@ static inline int kref_put(struct kref *kref, void (*release)(struct kref *kref) return kref_sub(kref, 1, release); } +/** + * kref_put_spinlock_irqsave - decrement refcount for object. + * @kref: object. + * @release: pointer to the function that will clean up the object when the + * last reference to the object is released. + * This pointer is required, and it is not acceptable to pass kfree + * in as this function. + * @lock: lock to take in release case + * + * Behaves identical to kref_put with one exception. If the reference count + * drops to zero, the lock will be taken atomically wrt dropping the reference + * count. The release function has to call spin_unlock() without _irqrestore. + */ +static inline int kref_put_spinlock_irqsave(struct kref *kref, + void (*release)(struct kref *kref), + spinlock_t *lock) +{ + unsigned long flags; + + WARN_ON(release == NULL); + if (atomic_add_unless(&kref->refcount, -1, 1)) + return 0; + spin_lock_irqsave(lock, flags); + if (atomic_dec_and_test(&kref->refcount)) { + release(kref); + local_irq_restore(flags); + return 1; + } + spin_unlock_irqrestore(lock, flags); + return 0; +} + static inline int kref_put_mutex(struct kref *kref, void (*release)(struct kref *kref), struct mutex *lock) -- cgit v1.2.3 From 8cdb46da06ea94543a3b2e53e3e92736421d1093 Mon Sep 17 00:00:00 2001 From: Hans Schillstrom Date: Wed, 15 May 2013 01:23:45 +0000 Subject: netfilter: log: netns NULL ptr bug when calling from conntrack Since (69b34fb netfilter: xt_LOG: add net namespace support for xt_LOG), we hit this: [ 4224.708977] BUG: unable to handle kernel NULL pointer dereference at 0000000000000388 [ 4224.709074] IP: [] ipt_log_packet+0x29/0x270 when callling log functions from conntrack both in and out are NULL i.e. the net pointer is invalid. Adding struct net *net in call to nf_logfn() will secure that there always is a vaild net ptr. Reported as netfilter's bugzilla bug 818: https://bugzilla.netfilter.org/show_bug.cgi?id=818 Reported-by: Ronald Signed-off-by: Hans Schillstrom Signed-off-by: Pablo Neira Ayuso --- include/net/netfilter/nf_log.h | 3 ++- include/net/netfilter/nfnetlink_log.h | 3 ++- net/bridge/netfilter/ebt_log.c | 11 +++++------ net/bridge/netfilter/ebt_ulog.c | 18 +++++++++++------- net/ipv4/netfilter/ipt_ULOG.c | 13 ++++++++----- net/netfilter/nf_log.c | 2 +- net/netfilter/nfnetlink_log.c | 4 ++-- net/netfilter/xt_LOG.c | 13 +++++++------ net/netfilter/xt_NFLOG.c | 3 ++- 9 files changed, 40 insertions(+), 30 deletions(-) (limited to 'include') diff --git a/include/net/netfilter/nf_log.h b/include/net/netfilter/nf_log.h index 31f1fb9eb784..99eac12d040b 100644 --- a/include/net/netfilter/nf_log.h +++ b/include/net/netfilter/nf_log.h @@ -30,7 +30,8 @@ struct nf_loginfo { } u; }; -typedef void nf_logfn(u_int8_t pf, +typedef void nf_logfn(struct net *net, + u_int8_t pf, unsigned int hooknum, const struct sk_buff *skb, const struct net_device *in, diff --git a/include/net/netfilter/nfnetlink_log.h b/include/net/netfilter/nfnetlink_log.h index e2dec42c2db2..5ca3f14f0998 100644 --- a/include/net/netfilter/nfnetlink_log.h +++ b/include/net/netfilter/nfnetlink_log.h @@ -2,7 +2,8 @@ #define _KER_NFNETLINK_LOG_H void -nfulnl_log_packet(u_int8_t pf, +nfulnl_log_packet(struct net *net, + u_int8_t pf, unsigned int hooknum, const struct sk_buff *skb, const struct net_device *in, diff --git a/net/bridge/netfilter/ebt_log.c b/net/bridge/netfilter/ebt_log.c index 9878eb8204c5..19c37a4929bc 100644 --- a/net/bridge/netfilter/ebt_log.c +++ b/net/bridge/netfilter/ebt_log.c @@ -72,13 +72,12 @@ print_ports(const struct sk_buff *skb, uint8_t protocol, int offset) } static void -ebt_log_packet(u_int8_t pf, unsigned int hooknum, - const struct sk_buff *skb, const struct net_device *in, - const struct net_device *out, const struct nf_loginfo *loginfo, - const char *prefix) +ebt_log_packet(struct net *net, u_int8_t pf, unsigned int hooknum, + const struct sk_buff *skb, const struct net_device *in, + const struct net_device *out, const struct nf_loginfo *loginfo, + const char *prefix) { unsigned int bitmask; - struct net *net = dev_net(in ? in : out); /* FIXME: Disabled from containers until syslog ns is supported */ if (!net_eq(net, &init_net)) @@ -191,7 +190,7 @@ ebt_log_tg(struct sk_buff *skb, const struct xt_action_param *par) nf_log_packet(net, NFPROTO_BRIDGE, par->hooknum, skb, par->in, par->out, &li, "%s", info->prefix); else - ebt_log_packet(NFPROTO_BRIDGE, par->hooknum, skb, par->in, + ebt_log_packet(net, NFPROTO_BRIDGE, par->hooknum, skb, par->in, par->out, &li, info->prefix); return EBT_CONTINUE; } diff --git a/net/bridge/netfilter/ebt_ulog.c b/net/bridge/netfilter/ebt_ulog.c index fc1905c51417..df0364aa12d5 100644 --- a/net/bridge/netfilter/ebt_ulog.c +++ b/net/bridge/netfilter/ebt_ulog.c @@ -131,14 +131,16 @@ static struct sk_buff *ulog_alloc_skb(unsigned int size) return skb; } -static void ebt_ulog_packet(unsigned int hooknr, const struct sk_buff *skb, - const struct net_device *in, const struct net_device *out, - const struct ebt_ulog_info *uloginfo, const char *prefix) +static void ebt_ulog_packet(struct net *net, unsigned int hooknr, + const struct sk_buff *skb, + const struct net_device *in, + const struct net_device *out, + const struct ebt_ulog_info *uloginfo, + const char *prefix) { ebt_ulog_packet_msg_t *pm; size_t size, copy_len; struct nlmsghdr *nlh; - struct net *net = dev_net(in ? in : out); struct ebt_ulog_net *ebt = ebt_ulog_pernet(net); unsigned int group = uloginfo->nlgroup; ebt_ulog_buff_t *ub = &ebt->ulog_buffers[group]; @@ -233,7 +235,7 @@ unlock: } /* this function is registered with the netfilter core */ -static void ebt_log_packet(u_int8_t pf, unsigned int hooknum, +static void ebt_log_packet(struct net *net, u_int8_t pf, unsigned int hooknum, const struct sk_buff *skb, const struct net_device *in, const struct net_device *out, const struct nf_loginfo *li, const char *prefix) @@ -252,13 +254,15 @@ static void ebt_log_packet(u_int8_t pf, unsigned int hooknum, strlcpy(loginfo.prefix, prefix, sizeof(loginfo.prefix)); } - ebt_ulog_packet(hooknum, skb, in, out, &loginfo, prefix); + ebt_ulog_packet(net, hooknum, skb, in, out, &loginfo, prefix); } static unsigned int ebt_ulog_tg(struct sk_buff *skb, const struct xt_action_param *par) { - ebt_ulog_packet(par->hooknum, skb, par->in, par->out, + struct net *net = dev_net(par->in ? par->in : par->out); + + ebt_ulog_packet(net, par->hooknum, skb, par->in, par->out, par->targinfo, NULL); return EBT_CONTINUE; } diff --git a/net/ipv4/netfilter/ipt_ULOG.c b/net/ipv4/netfilter/ipt_ULOG.c index f8a222cb6448..cf08218ddbcf 100644 --- a/net/ipv4/netfilter/ipt_ULOG.c +++ b/net/ipv4/netfilter/ipt_ULOG.c @@ -162,7 +162,8 @@ static struct sk_buff *ulog_alloc_skb(unsigned int size) return skb; } -static void ipt_ulog_packet(unsigned int hooknum, +static void ipt_ulog_packet(struct net *net, + unsigned int hooknum, const struct sk_buff *skb, const struct net_device *in, const struct net_device *out, @@ -174,7 +175,6 @@ static void ipt_ulog_packet(unsigned int hooknum, size_t size, copy_len; struct nlmsghdr *nlh; struct timeval tv; - struct net *net = dev_net(in ? in : out); struct ulog_net *ulog = ulog_pernet(net); /* ffs == find first bit set, necessary because userspace @@ -291,12 +291,15 @@ alloc_failure: static unsigned int ulog_tg(struct sk_buff *skb, const struct xt_action_param *par) { - ipt_ulog_packet(par->hooknum, skb, par->in, par->out, + struct net *net = dev_net(par->in ? par->in : par->out); + + ipt_ulog_packet(net, par->hooknum, skb, par->in, par->out, par->targinfo, NULL); return XT_CONTINUE; } -static void ipt_logfn(u_int8_t pf, +static void ipt_logfn(struct net *net, + u_int8_t pf, unsigned int hooknum, const struct sk_buff *skb, const struct net_device *in, @@ -318,7 +321,7 @@ static void ipt_logfn(u_int8_t pf, strlcpy(loginfo.prefix, prefix, sizeof(loginfo.prefix)); } - ipt_ulog_packet(hooknum, skb, in, out, &loginfo, prefix); + ipt_ulog_packet(net, hooknum, skb, in, out, &loginfo, prefix); } static int ulog_tg_check(const struct xt_tgchk_param *par) diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c index 757951d251e3..3b18dd1be7d9 100644 --- a/net/netfilter/nf_log.c +++ b/net/netfilter/nf_log.c @@ -148,7 +148,7 @@ void nf_log_packet(struct net *net, va_start(args, fmt); vsnprintf(prefix, sizeof(prefix), fmt, args); va_end(args); - logger->logfn(pf, hooknum, skb, in, out, loginfo, prefix); + logger->logfn(net, pf, hooknum, skb, in, out, loginfo, prefix); } rcu_read_unlock(); } diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c index d83d881002a6..962e9792e317 100644 --- a/net/netfilter/nfnetlink_log.c +++ b/net/netfilter/nfnetlink_log.c @@ -602,7 +602,8 @@ static struct nf_loginfo default_loginfo = { /* log handler for internal netfilter logging api */ void -nfulnl_log_packet(u_int8_t pf, +nfulnl_log_packet(struct net *net, + u_int8_t pf, unsigned int hooknum, const struct sk_buff *skb, const struct net_device *in, @@ -615,7 +616,6 @@ nfulnl_log_packet(u_int8_t pf, const struct nf_loginfo *li; unsigned int qthreshold; unsigned int plen; - struct net *net = dev_net(in ? in : out); struct nfnl_log_net *log = nfnl_log_pernet(net); if (li_user && li_user->type == NF_LOG_TYPE_ULOG) diff --git a/net/netfilter/xt_LOG.c b/net/netfilter/xt_LOG.c index fe573f6c9e91..491c7d821a0b 100644 --- a/net/netfilter/xt_LOG.c +++ b/net/netfilter/xt_LOG.c @@ -466,7 +466,8 @@ log_packet_common(struct sbuff *m, static void -ipt_log_packet(u_int8_t pf, +ipt_log_packet(struct net *net, + u_int8_t pf, unsigned int hooknum, const struct sk_buff *skb, const struct net_device *in, @@ -475,7 +476,6 @@ ipt_log_packet(u_int8_t pf, const char *prefix) { struct sbuff *m; - struct net *net = dev_net(in ? in : out); /* FIXME: Disabled from containers until syslog ns is supported */ if (!net_eq(net, &init_net)) @@ -797,7 +797,8 @@ fallback: } static void -ip6t_log_packet(u_int8_t pf, +ip6t_log_packet(struct net *net, + u_int8_t pf, unsigned int hooknum, const struct sk_buff *skb, const struct net_device *in, @@ -806,7 +807,6 @@ ip6t_log_packet(u_int8_t pf, const char *prefix) { struct sbuff *m; - struct net *net = dev_net(in ? in : out); /* FIXME: Disabled from containers until syslog ns is supported */ if (!net_eq(net, &init_net)) @@ -833,17 +833,18 @@ log_tg(struct sk_buff *skb, const struct xt_action_param *par) { const struct xt_log_info *loginfo = par->targinfo; struct nf_loginfo li; + struct net *net = dev_net(par->in ? par->in : par->out); li.type = NF_LOG_TYPE_LOG; li.u.log.level = loginfo->level; li.u.log.logflags = loginfo->logflags; if (par->family == NFPROTO_IPV4) - ipt_log_packet(NFPROTO_IPV4, par->hooknum, skb, par->in, + ipt_log_packet(net, NFPROTO_IPV4, par->hooknum, skb, par->in, par->out, &li, loginfo->prefix); #if IS_ENABLED(CONFIG_IP6_NF_IPTABLES) else if (par->family == NFPROTO_IPV6) - ip6t_log_packet(NFPROTO_IPV6, par->hooknum, skb, par->in, + ip6t_log_packet(net, NFPROTO_IPV6, par->hooknum, skb, par->in, par->out, &li, loginfo->prefix); #endif else diff --git a/net/netfilter/xt_NFLOG.c b/net/netfilter/xt_NFLOG.c index a17dd0f589b2..fb7497c928a0 100644 --- a/net/netfilter/xt_NFLOG.c +++ b/net/netfilter/xt_NFLOG.c @@ -26,13 +26,14 @@ nflog_tg(struct sk_buff *skb, const struct xt_action_param *par) { const struct xt_nflog_info *info = par->targinfo; struct nf_loginfo li; + struct net *net = dev_net(par->in ? par->in : par->out); li.type = NF_LOG_TYPE_ULOG; li.u.ulog.copy_len = info->len; li.u.ulog.group = info->group; li.u.ulog.qthreshold = info->threshold; - nfulnl_log_packet(par->family, par->hooknum, skb, par->in, + nfulnl_log_packet(net, par->family, par->hooknum, skb, par->in, par->out, &li, info->prefix); return XT_CONTINUE; } -- cgit v1.2.3 From de97f250394996f5acb07ba9e6dbdfc15ee4316c Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Thu, 2 May 2013 09:51:44 -0400 Subject: Correct typo "supperspeed" to "superspeed". Tidy up kernel-doc content for USB GADGET. No functional change. Signed-off-by: Robert P. J. Day Signed-off-by: Felipe Balbi --- include/linux/usb/gadget.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index c454a88abf2e..f1b0dca60f12 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -563,9 +563,8 @@ static inline int gadget_is_dualspeed(struct usb_gadget *g) } /** - * gadget_is_superspeed() - return true if the hardware handles - * supperspeed - * @g: controller that might support supper speed + * gadget_is_superspeed() - return true if the hardware handles superspeed + * @g: controller that might support superspeed */ static inline int gadget_is_superspeed(struct usb_gadget *g) { -- cgit v1.2.3 From 755ccb9d577b95b43537cfeb36da59140412f858 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 15 May 2013 08:00:25 +0000 Subject: broadcom: add include guards to include/linux/brcmphy.h include/linux/brcmphy.h is currently not protected against double inclusion, add ifdefs guard to fix that. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- include/linux/brcmphy.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include') diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h index b840a4960282..677b4f01b2d0 100644 --- a/include/linux/brcmphy.h +++ b/include/linux/brcmphy.h @@ -1,3 +1,6 @@ +#ifndef _LINUX_BRCMPHY_H +#define _LINUX_BRCMPHY_H + #define PHY_ID_BCM50610 0x0143bd60 #define PHY_ID_BCM50610M 0x0143bd70 #define PHY_ID_BCM5241 0x0143bc30 @@ -29,3 +32,5 @@ #define PHY_BRCM_CLEAR_RGMII_MODE 0x00004000 #define PHY_BRCM_DIS_TXCRXC_NOENRGY 0x00008000 #define PHY_BCM_FLAGS_VALID 0x80000000 + +#endif /* _LINUX_BRCMPHY_H */ -- cgit v1.2.3 From f6b3d85f7f6d66f890862d763b2ed092c5dd4322 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 3 May 2013 10:01:03 +0200 Subject: mac80211: fix spurious RCU warning and update documentation Document rx vs tx status concurrency requirements. Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- include/net/mac80211.h | 12 ++++++++---- net/mac80211/rate.c | 9 ++++++++- 2 files changed, 16 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 04c2d4670dc6..885898a40d13 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -3043,7 +3043,8 @@ void ieee80211_napi_complete(struct ieee80211_hw *hw); * This function may not be called in IRQ context. Calls to this function * for a single hardware must be synchronized against each other. Calls to * this function, ieee80211_rx_ni() and ieee80211_rx_irqsafe() may not be - * mixed for a single hardware. + * mixed for a single hardware. Must not run concurrently with + * ieee80211_tx_status() or ieee80211_tx_status_ni(). * * In process context use instead ieee80211_rx_ni(). * @@ -3059,7 +3060,8 @@ void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb); * (internally defers to a tasklet.) * * Calls to this function, ieee80211_rx() or ieee80211_rx_ni() may not - * be mixed for a single hardware. + * be mixed for a single hardware.Must not run concurrently with + * ieee80211_tx_status() or ieee80211_tx_status_ni(). * * @hw: the hardware this frame came in on * @skb: the buffer to receive, owned by mac80211 after this call @@ -3073,7 +3075,8 @@ void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, struct sk_buff *skb); * (internally disables bottom halves). * * Calls to this function, ieee80211_rx() and ieee80211_rx_irqsafe() may - * not be mixed for a single hardware. + * not be mixed for a single hardware. Must not run concurrently with + * ieee80211_tx_status() or ieee80211_tx_status_ni(). * * @hw: the hardware this frame came in on * @skb: the buffer to receive, owned by mac80211 after this call @@ -3196,7 +3199,8 @@ void ieee80211_get_tx_rates(struct ieee80211_vif *vif, * This function may not be called in IRQ context. Calls to this function * for a single hardware must be synchronized against each other. Calls * to this function, ieee80211_tx_status_ni() and ieee80211_tx_status_irqsafe() - * may not be mixed for a single hardware. + * may not be mixed for a single hardware. Must not run concurrently with + * ieee80211_rx() or ieee80211_rx_ni(). * * @hw: the hardware the frame was transmitted by * @skb: the frame that was transmitted, owned by mac80211 after this call diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c index 0d51877efdb7..d3f414fe67e0 100644 --- a/net/mac80211/rate.c +++ b/net/mac80211/rate.c @@ -688,8 +688,15 @@ int rate_control_set_rates(struct ieee80211_hw *hw, struct ieee80211_sta *pubsta, struct ieee80211_sta_rates *rates) { - struct ieee80211_sta_rates *old = rcu_dereference(pubsta->rates); + struct ieee80211_sta_rates *old; + /* + * mac80211 guarantees that this function will not be called + * concurrently, so the following RCU access is safe, even without + * extra locking. This can not be checked easily, so we just set + * the condition to true. + */ + old = rcu_dereference_protected(pubsta->rates, true); rcu_assign_pointer(pubsta->rates, rates); if (old) kfree_rcu(old, rcu_head); -- cgit v1.2.3 From b0ce3508b25ea6fa10ae3ca254de1d695b521702 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 16 May 2013 07:34:53 +0000 Subject: bonding: allow TSO being set on bonding master MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In some situations, we need to disable TSO on bonding slaves. bonding device automatically unset TSO in bond_fix_features(), and performance is not good because : 1) We consume more cpu cycles. 2) GSO segmentation has some bugs leading to out of order TCP packets if this segmentation is done before virtual device. This particular problem will be addressed in a separate patch. This patch allows TSO being set/unset on the bonding master, so that GSO segmentation is done after bonding layer. Signed-off-by: Eric Dumazet Cc: Michał Mirosław Cc: Jay Vosburgh Cc: Andy Gospodarek Cc: Maciej Żenczykowski Cc: Tom Herbert Cc: Neal Cardwell Cc: Yuchung Cheng Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 1 + include/linux/netdevice.h | 11 +++++++++++ 2 files changed, 12 insertions(+) (limited to 'include') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index d0aade04e49a..449ad9bbe45c 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1362,6 +1362,7 @@ static netdev_features_t bond_fix_features(struct net_device *dev, slave->dev->features, mask); } + features = netdev_add_tso_features(features, mask); out: read_unlock(&bond->lock); diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index a94a5a0ab122..60584b185a0c 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2733,6 +2733,17 @@ static inline netdev_features_t netdev_get_wanted_features( } netdev_features_t netdev_increment_features(netdev_features_t all, netdev_features_t one, netdev_features_t mask); + +/* Allow TSO being used on stacked device : + * Performing the GSO segmentation before last device + * is a performance improvement. + */ +static inline netdev_features_t netdev_add_tso_features(netdev_features_t features, + netdev_features_t mask) +{ + return netdev_increment_features(features, NETIF_F_ALL_TSO, mask); +} + int __netdev_update_features(struct net_device *dev); void netdev_update_features(struct net_device *dev); void netdev_change_features(struct net_device *dev); -- cgit v1.2.3 From 0b8ebdb18888c55588b932f4f564b9c9529de627 Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Thu, 9 May 2013 13:08:08 +0200 Subject: mfd: ab8500-sysctrl: Always enable pm_power_off handler AB8500 sysctrl driver implements a pm_power_off handler, but that is currently not registered until a specific platform data field is enabled. This patch drops the platform data field and always registers ab8500_power_off if no other pm_power_off handler was defined before, and also introduces the necessary cleanup code in the driver's remove function. Acked-by: Linus Walleij Signed-off-by: Fabio Baltieri Signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz --- drivers/mfd/ab8500-sysctrl.c | 6 +++++- include/linux/mfd/abx500/ab8500.h | 2 -- 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c index b851692b0755..0c20361eae26 100644 --- a/drivers/mfd/ab8500-sysctrl.c +++ b/drivers/mfd/ab8500-sysctrl.c @@ -193,7 +193,7 @@ static int ab8500_sysctrl_probe(struct platform_device *pdev) sysctrl_dev = &pdev->dev; - if (plat->pm_power_off) + if (!pm_power_off) pm_power_off = ab8500_power_off; pdata = plat->sysctrl; @@ -228,6 +228,10 @@ static int ab8500_sysctrl_probe(struct platform_device *pdev) static int ab8500_sysctrl_remove(struct platform_device *pdev) { sysctrl_dev = NULL; + + if (pm_power_off == ab8500_power_off) + pm_power_off = NULL; + return 0; } diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h index fb1bf7d6a410..0390d5943ed6 100644 --- a/include/linux/mfd/abx500/ab8500.h +++ b/include/linux/mfd/abx500/ab8500.h @@ -373,13 +373,11 @@ struct ab8500_sysctrl_platform_data; /** * struct ab8500_platform_data - AB8500 platform data * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used - * @pm_power_off: Should machine pm power off hook be registered or not * @init: board-specific initialization after detection of ab8500 * @regulator: machine-specific constraints for regulators */ struct ab8500_platform_data { int irq_base; - bool pm_power_off; void (*init) (struct ab8500 *); struct ab8500_regulator_platform_data *regulator; struct abx500_gpio_platform_data *gpio; -- cgit v1.2.3 From 0693196fe7bbb5e6cafd255dfce91ff6d10bc18f Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sun, 5 May 2013 20:32:27 +0200 Subject: USB: serial: add wait_until_sent operation Add wait_until_sent operation which can be used to wait for hardware buffers to drain. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb-serial.c | 17 +++++++++++++++++ include/linux/usb/serial.h | 1 + 2 files changed, 18 insertions(+) (limited to 'include') diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index cf75beb1251b..31d27686151f 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -375,6 +375,22 @@ static int serial_chars_in_buffer(struct tty_struct *tty) return count; } +static void serial_wait_until_sent(struct tty_struct *tty, int timeout) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial = port->serial; + + dev_dbg(tty->dev, "%s\n", __func__); + + if (!port->serial->type->wait_until_sent) + return; + + mutex_lock(&serial->disc_mutex); + if (!serial->disconnected) + port->serial->type->wait_until_sent(tty, timeout); + mutex_unlock(&serial->disc_mutex); +} + static void serial_throttle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; @@ -1191,6 +1207,7 @@ static const struct tty_operations serial_ops = { .unthrottle = serial_unthrottle, .break_ctl = serial_break, .chars_in_buffer = serial_chars_in_buffer, + .wait_until_sent = serial_wait_until_sent, .tiocmget = serial_tiocmget, .tiocmset = serial_tiocmset, .get_icount = serial_get_icount, diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index b9b0f7b4e43b..afbb7eeaac5f 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -268,6 +268,7 @@ struct usb_serial_driver { struct usb_serial_port *port, struct ktermios *old); void (*break_ctl)(struct tty_struct *tty, int break_state); int (*chars_in_buffer)(struct tty_struct *tty); + void (*wait_until_sent)(struct tty_struct *tty, long timeout); void (*throttle)(struct tty_struct *tty); void (*unthrottle)(struct tty_struct *tty); int (*tiocmget)(struct tty_struct *tty); -- cgit v1.2.3 From dcf0105039660e951dfea348d317043d17988dfc Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 8 May 2013 17:51:43 +0200 Subject: USB: serial: add generic wait_until_sent implementation Add generic wait_until_sent implementation which polls for empty hardware buffers using the new port-operation tx_empty. The generic implementation will be used for all sub-drivers that implement tx_empty but does not define wait_until_sent. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/generic.c | 31 +++++++++++++++++++++++++++++++ drivers/usb/serial/usb-serial.c | 2 ++ include/linux/usb/serial.h | 3 +++ 3 files changed, 36 insertions(+) (limited to 'include') diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 297665fdd16d..ba45170c78e5 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -253,6 +253,37 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty) } EXPORT_SYMBOL_GPL(usb_serial_generic_chars_in_buffer); +void usb_serial_generic_wait_until_sent(struct tty_struct *tty, long timeout) +{ + struct usb_serial_port *port = tty->driver_data; + unsigned int bps; + unsigned long period; + unsigned long expire; + + bps = tty_get_baud_rate(tty); + if (!bps) + bps = 9600; /* B0 */ + /* + * Use a poll-period of roughly the time it takes to send one + * character or at least one jiffy. + */ + period = max_t(unsigned long, (10 * HZ / bps), 1); + period = min_t(unsigned long, period, timeout); + + dev_dbg(&port->dev, "%s - timeout = %u ms, period = %u ms\n", + __func__, jiffies_to_msecs(timeout), + jiffies_to_msecs(period)); + expire = jiffies + timeout; + while (!port->serial->type->tx_empty(port)) { + schedule_timeout_interruptible(period); + if (signal_pending(current)) + break; + if (time_after(jiffies, expire)) + break; + } +} +EXPORT_SYMBOL_GPL(usb_serial_generic_wait_until_sent); + static int usb_serial_generic_submit_read_urb(struct usb_serial_port *port, int index, gfp_t mem_flags) { diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 31d27686151f..60caf9cb99f4 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1333,6 +1333,8 @@ static void usb_serial_operations_init(struct usb_serial_driver *device) set_to_generic_if_null(device, close); set_to_generic_if_null(device, write_room); set_to_generic_if_null(device, chars_in_buffer); + if (device->tx_empty) + set_to_generic_if_null(device, wait_until_sent); set_to_generic_if_null(device, read_bulk_callback); set_to_generic_if_null(device, write_bulk_callback); set_to_generic_if_null(device, process_read_urb); diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index afbb7eeaac5f..302ddf55d2da 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -269,6 +269,7 @@ struct usb_serial_driver { void (*break_ctl)(struct tty_struct *tty, int break_state); int (*chars_in_buffer)(struct tty_struct *tty); void (*wait_until_sent)(struct tty_struct *tty, long timeout); + bool (*tx_empty)(struct usb_serial_port *port); void (*throttle)(struct tty_struct *tty); void (*unthrottle)(struct tty_struct *tty); int (*tiocmget)(struct tty_struct *tty); @@ -328,6 +329,8 @@ extern void usb_serial_generic_close(struct usb_serial_port *port); extern int usb_serial_generic_resume(struct usb_serial *serial); extern int usb_serial_generic_write_room(struct tty_struct *tty); extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty); +extern void usb_serial_generic_wait_until_sent(struct tty_struct *tty, + long timeout); extern void usb_serial_generic_read_bulk_callback(struct urb *urb); extern void usb_serial_generic_write_bulk_callback(struct urb *urb); extern void usb_serial_generic_throttle(struct tty_struct *tty); -- cgit v1.2.3 From d4988d4c733ba0b61cb372edd3d1992d26dd10d3 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Thu, 9 May 2013 21:24:24 +0200 Subject: bcma: add more core IDs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit PCIe and ARM CR4 cores were found on 14e4:43b1 AKA BCM4352. Reported-by: Gabriel Thörnblad Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- drivers/bcma/scan.c | 2 ++ include/linux/bcma/bcma.h | 5 ++++- 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/drivers/bcma/scan.c b/drivers/bcma/scan.c index bca9c80056fe..8bffa5c9818c 100644 --- a/drivers/bcma/scan.c +++ b/drivers/bcma/scan.c @@ -84,6 +84,8 @@ static const struct bcma_device_id_name bcma_bcm_device_names[] = { { BCMA_CORE_I2S, "I2S" }, { BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" }, { BCMA_CORE_SHIM, "SHIM" }, + { BCMA_CORE_PCIE2, "PCIe Gen2" }, + { BCMA_CORE_ARM_CR4, "ARM CR4" }, { BCMA_CORE_DEFAULT, "Default" }, }; diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index f14a98a79c9d..2e34db82a643 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -134,7 +134,10 @@ struct bcma_host_ops { #define BCMA_CORE_I2S 0x834 #define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */ #define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */ -#define BCMA_CORE_ARM_CR4 0x83e +#define BCMA_CORE_PHY_AC 0x83B +#define BCMA_CORE_PCIE2 0x83C /* PCI Express Gen2 */ +#define BCMA_CORE_USB30_DEV 0x83D +#define BCMA_CORE_ARM_CR4 0x83E #define BCMA_CORE_DEFAULT 0xFFF #define BCMA_MAX_NR_CORES 16 -- cgit v1.2.3 From 3f327e39b4b8f760c331bb2836735be6d83fbf53 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 7 May 2013 11:06:03 -0600 Subject: PCI: acpiphp: Re-enumerate devices when host bridge receives Bus Check When a PCI host bridge device receives a Bus Check notification, we must re-enumerate starting with the bridge to discover changes (devices that have been added or removed). Prior to 668192b678 ("PCI: acpiphp: Move host bridge hotplug to pci_root.c"), this happened in _handle_hotplug_event_bridge(). After that commit, _handle_hotplug_event_bridge() is not installed for host bridges, and the host bridge notify handler, _handle_hotplug_event_root() did not re-enumerate. This patch adds re-enumeration to _handle_hotplug_event_root(). This fixes cases where we don't notice the addition or removal of PCI devices, e.g., the PCI-to-USB ExpressCard in the bugzilla below. [bhelgaas: changelog, references] Reference: https://lkml.kernel.org/r/CAAh6nkmbKR3HTqm5ommevsBwhL_u0N8Rk7Wsms_LfP=nBgKNew@mail.gmail.com Reference: https://bugzilla.kernel.org/show_bug.cgi?id=57961 Reported-by: Gavin Guo Tested-by: Gavin Guo Signed-off-by: Yinghai Lu Signed-off-by: Bjorn Helgaas Reviewed-by: Jiang Liu Acked-by: Rafael J. Wysocki CC: stable@vger.kernel.org # v3.9+ --- drivers/acpi/pci_root.c | 4 +++- drivers/pci/hotplug/acpiphp_glue.c | 14 ++++++++++++++ include/linux/pci-acpi.h | 2 ++ 3 files changed, 19 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index 1dd6f6c85874..e427dc516c76 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -641,7 +641,9 @@ static void _handle_hotplug_event_root(struct work_struct *work) /* bus enumerate */ printk(KERN_DEBUG "%s: Bus check notify on %s\n", __func__, (char *)buffer.pointer); - if (!root) + if (root) + acpiphp_check_host_bridge(handle); + else handle_root_bridge_insertion(handle); break; diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 96fed19c6d90..716aa93fff76 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -950,6 +950,20 @@ check_sub_bridges(acpi_handle handle, u32 lvl, void *context, void **rv) return AE_OK ; } +void acpiphp_check_host_bridge(acpi_handle handle) +{ + struct acpiphp_bridge *bridge; + + bridge = acpiphp_handle_to_bridge(handle); + if (bridge) { + acpiphp_check_bridge(bridge); + put_bridge(bridge); + } + + acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, + ACPI_UINT32_MAX, check_sub_bridges, NULL, NULL, NULL); +} + static void _handle_hotplug_event_bridge(struct work_struct *work) { struct acpiphp_bridge *bridge; diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h index 81b31613eb25..170447977278 100644 --- a/include/linux/pci-acpi.h +++ b/include/linux/pci-acpi.h @@ -60,11 +60,13 @@ static inline void acpi_pci_slot_remove(struct pci_bus *bus) { } void acpiphp_init(void); void acpiphp_enumerate_slots(struct pci_bus *bus, acpi_handle handle); void acpiphp_remove_slots(struct pci_bus *bus); +void acpiphp_check_host_bridge(acpi_handle handle); #else static inline void acpiphp_init(void) { } static inline void acpiphp_enumerate_slots(struct pci_bus *bus, acpi_handle handle) { } static inline void acpiphp_remove_slots(struct pci_bus *bus) { } +static inline void acpiphp_check_host_bridge(acpi_handle handle) { } #endif #else /* CONFIG_ACPI */ -- cgit v1.2.3 From 7f18d05a1af75142d4856a91ffd2f1d8eb553c12 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Wed, 15 May 2013 20:18:41 +0530 Subject: SERIAL: OMAP: Remove the slave idle handling from the driver UART IP slave idle handling now taken care by runtime pm backend(hwmod layer) so remove the hackery from the driver. As discussed on the list, in future if dma mode needs to be brought back to this driver, UART sysc handling needs to be updated in framework such a way that no-idle/force idle profile can be supported. Given the broken dma mode for OMAP uarts, its very unlikely. Acked-by: Greg Kroah-Hartman Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley --- drivers/tty/serial/omap-serial.c | 23 ----------------------- include/linux/platform_data/serial-omap.h | 2 -- 2 files changed, 25 deletions(-) (limited to 'include') diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 30d4f7a783cd..f0b9f6b52b32 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -202,26 +202,6 @@ static int serial_omap_get_context_loss_count(struct uart_omap_port *up) return pdata->get_context_loss_count(up->dev); } -static void serial_omap_set_forceidle(struct uart_omap_port *up) -{ - struct omap_uart_port_info *pdata = up->dev->platform_data; - - if (!pdata || !pdata->set_forceidle) - return; - - pdata->set_forceidle(up->dev); -} - -static void serial_omap_set_noidle(struct uart_omap_port *up) -{ - struct omap_uart_port_info *pdata = up->dev->platform_data; - - if (!pdata || !pdata->set_noidle) - return; - - pdata->set_noidle(up->dev); -} - static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable) { struct omap_uart_port_info *pdata = up->dev->platform_data; @@ -298,8 +278,6 @@ static void serial_omap_stop_tx(struct uart_port *port) serial_out(up, UART_IER, up->ier); } - serial_omap_set_forceidle(up); - pm_runtime_mark_last_busy(up->dev); pm_runtime_put_autosuspend(up->dev); } @@ -364,7 +342,6 @@ static void serial_omap_start_tx(struct uart_port *port) pm_runtime_get_sync(up->dev); serial_omap_enable_ier_thri(up); - serial_omap_set_noidle(up); pm_runtime_mark_last_busy(up->dev); pm_runtime_put_autosuspend(up->dev); } diff --git a/include/linux/platform_data/serial-omap.h b/include/linux/platform_data/serial-omap.h index ff9b0aab5281..c860c1b314c0 100644 --- a/include/linux/platform_data/serial-omap.h +++ b/include/linux/platform_data/serial-omap.h @@ -43,8 +43,6 @@ struct omap_uart_port_info { int DTR_present; int (*get_context_loss_count)(struct device *); - void (*set_forceidle)(struct device *); - void (*set_noidle)(struct device *); void (*enable_wakeup)(struct device *, bool); }; -- cgit v1.2.3 From d2f83e9078b8114e3b9d09082856c1aac299aa37 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 17 May 2013 09:05:21 +0930 Subject: Hoist memcpy_fromiovec/memcpy_toiovec into lib/ ERROR: "memcpy_fromiovec" [drivers/vhost/vhost_scsi.ko] undefined! That function is only present with CONFIG_NET. Turns out that crypto/algif_skcipher.c also uses that outside net, but it actually needs sockets anyway. In addition, commit 6d4f0139d642c45411a47879325891ce2a7c164a added CONFIG_NET dependency to CONFIG_VMCI for memcpy_toiovec, so hoist that function and revert that commit too. socket.h already includes uio.h, so no callers need updating; trying only broke things fo x86_64 randconfig (thanks Fengguang!). Reported-by: Randy Dunlap Acked-by: David S. Miller Acked-by: Michael S. Tsirkin Signed-off-by: Rusty Russell --- drivers/misc/vmw_vmci/Kconfig | 2 +- drivers/misc/vmw_vmci/vmci_queue_pair.c | 2 +- include/linux/socket.h | 2 -- include/linux/uio.h | 3 ++ lib/Makefile | 2 +- lib/iovec.c | 53 +++++++++++++++++++++++++++++++++ net/core/iovec.c | 50 ------------------------------- 7 files changed, 59 insertions(+), 55 deletions(-) create mode 100644 lib/iovec.c (limited to 'include') diff --git a/drivers/misc/vmw_vmci/Kconfig b/drivers/misc/vmw_vmci/Kconfig index ea98f7e9ccd1..39c2ecadb273 100644 --- a/drivers/misc/vmw_vmci/Kconfig +++ b/drivers/misc/vmw_vmci/Kconfig @@ -4,7 +4,7 @@ config VMWARE_VMCI tristate "VMware VMCI Driver" - depends on X86 && PCI && NET + depends on X86 && PCI help This is VMware's Virtual Machine Communication Interface. It enables high-speed communication between host and guest in a virtual diff --git a/drivers/misc/vmw_vmci/vmci_queue_pair.c b/drivers/misc/vmw_vmci/vmci_queue_pair.c index d94245dbd765..8ff2e5ee8fb8 100644 --- a/drivers/misc/vmw_vmci/vmci_queue_pair.c +++ b/drivers/misc/vmw_vmci/vmci_queue_pair.c @@ -23,7 +23,7 @@ #include #include #include -#include +#include #include #include diff --git a/include/linux/socket.h b/include/linux/socket.h index 428c37a1f95c..33bf2dfab19d 100644 --- a/include/linux/socket.h +++ b/include/linux/socket.h @@ -305,7 +305,6 @@ struct ucred { extern void cred_to_ucred(struct pid *pid, const struct cred *cred, struct ucred *ucred); -extern int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len); extern int memcpy_fromiovecend(unsigned char *kdata, const struct iovec *iov, int offset, int len); extern int csum_partial_copy_fromiovecend(unsigned char *kdata, @@ -314,7 +313,6 @@ extern int csum_partial_copy_fromiovecend(unsigned char *kdata, unsigned int len, __wsum *csump); extern int verify_iovec(struct msghdr *m, struct iovec *iov, struct sockaddr_storage *address, int mode); -extern int memcpy_toiovec(struct iovec *v, unsigned char *kdata, int len); extern int memcpy_toiovecend(const struct iovec *v, unsigned char *kdata, int offset, int len); extern int move_addr_to_kernel(void __user *uaddr, int ulen, struct sockaddr_storage *kaddr); diff --git a/include/linux/uio.h b/include/linux/uio.h index 629aaf51f30b..c55ce243cc09 100644 --- a/include/linux/uio.h +++ b/include/linux/uio.h @@ -35,4 +35,7 @@ static inline size_t iov_length(const struct iovec *iov, unsigned long nr_segs) } unsigned long iov_shorten(struct iovec *iov, unsigned long nr_segs, size_t to); + +int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len); +int memcpy_toiovec(struct iovec *iov, unsigned char *kdata, int len); #endif diff --git a/lib/Makefile b/lib/Makefile index e9c52e1b853a..237721165035 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -9,7 +9,7 @@ endif lib-y := ctype.o string.o vsprintf.o cmdline.o \ rbtree.o radix-tree.o dump_stack.o timerqueue.o\ - idr.o int_sqrt.o extable.o \ + idr.o int_sqrt.o extable.o iovec.o \ sha1.o md5.o irq_regs.o reciprocal_div.o argv_split.o \ proportions.o flex_proportions.o prio_heap.o ratelimit.o show_mem.o \ is_single_threaded.o plist.o decompress.o kobject_uevent.o \ diff --git a/lib/iovec.c b/lib/iovec.c new file mode 100644 index 000000000000..454baa88bf27 --- /dev/null +++ b/lib/iovec.c @@ -0,0 +1,53 @@ +#include +#include +#include + +/* + * Copy iovec to kernel. Returns -EFAULT on error. + * + * Note: this modifies the original iovec. + */ + +int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len) +{ + while (len > 0) { + if (iov->iov_len) { + int copy = min_t(unsigned int, len, iov->iov_len); + if (copy_from_user(kdata, iov->iov_base, copy)) + return -EFAULT; + len -= copy; + kdata += copy; + iov->iov_base += copy; + iov->iov_len -= copy; + } + iov++; + } + + return 0; +} +EXPORT_SYMBOL(memcpy_fromiovec); + +/* + * Copy kernel to iovec. Returns -EFAULT on error. + * + * Note: this modifies the original iovec. + */ + +int memcpy_toiovec(struct iovec *iov, unsigned char *kdata, int len) +{ + while (len > 0) { + if (iov->iov_len) { + int copy = min_t(unsigned int, iov->iov_len, len); + if (copy_to_user(iov->iov_base, kdata, copy)) + return -EFAULT; + kdata += copy; + len -= copy; + iov->iov_len -= copy; + iov->iov_base += copy; + } + iov++; + } + + return 0; +} +EXPORT_SYMBOL(memcpy_toiovec); diff --git a/net/core/iovec.c b/net/core/iovec.c index 7e7aeb01de45..de178e462682 100644 --- a/net/core/iovec.c +++ b/net/core/iovec.c @@ -73,31 +73,6 @@ int verify_iovec(struct msghdr *m, struct iovec *iov, struct sockaddr_storage *a return err; } -/* - * Copy kernel to iovec. Returns -EFAULT on error. - * - * Note: this modifies the original iovec. - */ - -int memcpy_toiovec(struct iovec *iov, unsigned char *kdata, int len) -{ - while (len > 0) { - if (iov->iov_len) { - int copy = min_t(unsigned int, iov->iov_len, len); - if (copy_to_user(iov->iov_base, kdata, copy)) - return -EFAULT; - kdata += copy; - len -= copy; - iov->iov_len -= copy; - iov->iov_base += copy; - } - iov++; - } - - return 0; -} -EXPORT_SYMBOL(memcpy_toiovec); - /* * Copy kernel to iovec. Returns -EFAULT on error. */ @@ -124,31 +99,6 @@ int memcpy_toiovecend(const struct iovec *iov, unsigned char *kdata, } EXPORT_SYMBOL(memcpy_toiovecend); -/* - * Copy iovec to kernel. Returns -EFAULT on error. - * - * Note: this modifies the original iovec. - */ - -int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len) -{ - while (len > 0) { - if (iov->iov_len) { - int copy = min_t(unsigned int, len, iov->iov_len); - if (copy_from_user(kdata, iov->iov_base, copy)) - return -EFAULT; - len -= copy; - kdata += copy; - iov->iov_base += copy; - iov->iov_len -= copy; - } - iov++; - } - - return 0; -} -EXPORT_SYMBOL(memcpy_fromiovec); - /* * Copy iovec from kernel. Returns -EFAULT on error. */ -- cgit v1.2.3 From 6407d75afd08545f2252bb39806ffd3f10c7faac Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Fri, 17 May 2013 10:44:15 +0930 Subject: virtio_console: fix uapi header uapi should use __u32 not u32. Fix a macro in virtio_console.h which uses u32. Signed-off-by: Michael S. Tsirkin Signed-off-by: Rusty Russell Cc: stable@kernel.org --- include/uapi/linux/virtio_console.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/uapi/linux/virtio_console.h b/include/uapi/linux/virtio_console.h index ee13ab6c3614..c312f16bc4e7 100644 --- a/include/uapi/linux/virtio_console.h +++ b/include/uapi/linux/virtio_console.h @@ -39,7 +39,7 @@ #define VIRTIO_CONSOLE_F_SIZE 0 /* Does host provide console size? */ #define VIRTIO_CONSOLE_F_MULTIPORT 1 /* Does host provide multiple ports? */ -#define VIRTIO_CONSOLE_BAD_ID (~(u32)0) +#define VIRTIO_CONSOLE_BAD_ID (~(__u32)0) struct virtio_console_config { /* colums of the screens */ -- cgit v1.2.3 From 2a0f90551a76a626fd6a606877c8635f52f066e6 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 27 Jul 2012 18:48:52 -0400 Subject: drm/radeon: add Hainan pci ids MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Alex Deucher Reviewed-by: Christian König --- include/drm/drm_pciids.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include') diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index c2af598f701d..bb1bc485390b 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -152,6 +152,12 @@ {0x1002, 0x6621, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6623, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6631, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6660, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6663, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6664, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6665, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6667, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x666F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6700, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6701, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6702, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \ -- cgit v1.2.3 From 421b40a6286ee343d77d5e51f5ee6d04d7a2a90f Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Fri, 17 May 2013 12:41:03 -0400 Subject: tty/vt: Fix vc_deallocate() lock order Now that the tty port owns the flip buffers and i/o is allowed from the driver even when no tty is attached, the destruction of the tty port (and the flip buffers) must ensure that no outstanding work is pending. Unfortunately, this creates a lock order problem with the console_lock (see attached lockdep report [1] below). For single console deallocation, drop the console_lock prior to port destruction. When multiple console deallocation, defer port destruction until the consoles have been deallocated. tty_port_destroy() is not required if the port has not been used; remove from vc_allocate() failure path. [1] lockdep report from Dave Jones ====================================================== [ INFO: possible circular locking dependency detected ] 3.9.0+ #16 Not tainted ------------------------------------------------------- (agetty)/26163 is trying to acquire lock: blocked: ((&buf->work)){+.+...}, instance: ffff88011c8b0020, at: [] flush_work+0x5/0x2e0 but task is already holding lock: blocked: (console_lock){+.+.+.}, instance: ffffffff81c2fde0, at: [] vt_ioctl+0xb61/0x1230 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (console_lock){+.+.+.}: [] lock_acquire+0xa4/0x210 [] console_lock+0x77/0x80 [] con_flush_chars+0x2d/0x50 [] n_tty_receive_buf+0x122/0x14d0 [] flush_to_ldisc+0x119/0x170 [] process_one_work+0x211/0x700 [] worker_thread+0x11b/0x3a0 [] kthread+0xed/0x100 [] ret_from_fork+0x7c/0xb0 -> #0 ((&buf->work)){+.+...}: [] __lock_acquire+0x193a/0x1c00 [] lock_acquire+0xa4/0x210 [] flush_work+0x4e/0x2e0 [] __cancel_work_timer+0x95/0x130 [] cancel_work_sync+0x10/0x20 [] tty_port_destroy+0x12/0x20 [] vc_deallocate+0xf8/0x110 [] vt_ioctl+0xb6c/0x1230 [] tty_ioctl+0x285/0xd50 [] do_vfs_ioctl+0x305/0x530 [] sys_ioctl+0x81/0xa0 [] system_call_fastpath+0x16/0x1b other info that might help us debug this: [ 6760.076175] Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(console_lock); lock((&buf->work)); lock(console_lock); lock((&buf->work)); *** DEADLOCK *** 1 lock on stack by (agetty)/26163: #0: blocked: (console_lock){+.+.+.}, instance: ffffffff81c2fde0, at: [] vt_ioctl+0xb61/0x1230 stack backtrace: Pid: 26163, comm: (agetty) Not tainted 3.9.0+ #16 Call Trace: [] print_circular_bug+0x200/0x20e [] __lock_acquire+0x193a/0x1c00 [] ? sched_clock+0x9/0x10 [] ? sched_clock+0x9/0x10 [] ? native_sched_clock+0x20/0x80 [] lock_acquire+0xa4/0x210 [] ? flush_work+0x5/0x2e0 [] flush_work+0x4e/0x2e0 [] ? flush_work+0x5/0x2e0 [] ? mark_held_locks+0xbb/0x140 [] ? __free_pages_ok.part.57+0x93/0xc0 [] ? mark_held_locks+0xbb/0x140 [] ? __cancel_work_timer+0x82/0x130 [] __cancel_work_timer+0x95/0x130 [] cancel_work_sync+0x10/0x20 [] tty_port_destroy+0x12/0x20 [] vc_deallocate+0xf8/0x110 [] vt_ioctl+0xb6c/0x1230 [] ? lock_release_holdtime.part.30+0xa1/0x170 [] tty_ioctl+0x285/0xd50 [] ? inode_has_perm.isra.46.constprop.61+0x56/0x80 [] do_vfs_ioctl+0x305/0x530 [] ? selinux_file_ioctl+0x5b/0x110 [] sys_ioctl+0x81/0xa0 [] system_call_fastpath+0x16/0x1b Cc: Dave Jones Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/vt.c | 14 +++++----- drivers/tty/vt/vt_ioctl.c | 67 ++++++++++++++++++++++++++++++++++------------- include/linux/vt_kern.h | 2 +- 3 files changed, 56 insertions(+), 27 deletions(-) (limited to 'include') diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index fbd447b390f7..740202d8a5c4 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -779,7 +779,6 @@ int vc_allocate(unsigned int currcons) /* return 0 on success */ con_set_default_unimap(vc); vc->vc_screenbuf = kmalloc(vc->vc_screenbuf_size, GFP_KERNEL); if (!vc->vc_screenbuf) { - tty_port_destroy(&vc->port); kfree(vc); vc_cons[currcons].d = NULL; return -ENOMEM; @@ -986,26 +985,25 @@ static int vt_resize(struct tty_struct *tty, struct winsize *ws) return ret; } -void vc_deallocate(unsigned int currcons) +struct vc_data *vc_deallocate(unsigned int currcons) { + struct vc_data *vc = NULL; + WARN_CONSOLE_UNLOCKED(); if (vc_cons_allocated(currcons)) { - struct vc_data *vc = vc_cons[currcons].d; - struct vt_notifier_param param = { .vc = vc }; + struct vt_notifier_param param; + param.vc = vc = vc_cons[currcons].d; atomic_notifier_call_chain(&vt_notifier_list, VT_DEALLOCATE, ¶m); vcs_remove_sysfs(currcons); vc->vc_sw->con_deinit(vc); put_pid(vc->vt_pid); module_put(vc->vc_sw->owner); kfree(vc->vc_screenbuf); - if (currcons >= MIN_NR_CONSOLES) { - tty_port_destroy(&vc->port); - kfree(vc); - } vc_cons[currcons].d = NULL; } + return vc; } /* diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index 98ff1735eafc..fc2c06c66e89 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -283,6 +283,51 @@ do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud, int perm, struct vc_ return 0; } +/* deallocate a single console, if possible (leave 0) */ +static int vt_disallocate(unsigned int vc_num) +{ + struct vc_data *vc = NULL; + int ret = 0; + + if (!vc_num) + return 0; + + console_lock(); + if (VT_BUSY(vc_num)) + ret = -EBUSY; + else + vc = vc_deallocate(vc_num); + console_unlock(); + + if (vc && vc_num >= MIN_NR_CONSOLES) { + tty_port_destroy(&vc->port); + kfree(vc); + } + + return ret; +} + +/* deallocate all unused consoles, but leave 0 */ +static void vt_disallocate_all(void) +{ + struct vc_data *vc[MAX_NR_CONSOLES]; + int i; + + console_lock(); + for (i = 1; i < MAX_NR_CONSOLES; i++) + if (!VT_BUSY(i)) + vc[i] = vc_deallocate(i); + else + vc[i] = NULL; + console_unlock(); + + for (i = 1; i < MAX_NR_CONSOLES; i++) { + if (vc[i] && i >= MIN_NR_CONSOLES) { + tty_port_destroy(&vc[i]->port); + kfree(vc[i]); + } + } +} /* @@ -769,24 +814,10 @@ int vt_ioctl(struct tty_struct *tty, ret = -ENXIO; break; } - if (arg == 0) { - /* deallocate all unused consoles, but leave 0 */ - console_lock(); - for (i=1; i Date: Wed, 15 May 2013 00:44:07 -0700 Subject: target: Remove unused wait_for_tasks bit in target_wait_for_sess_cmds Drop unused transport_wait_for_tasks() check in target_wait_for_sess_cmds shutdown code, and convert tcm_qla2xxx + ib_srpt fabric drivers. Cc: Joern Engel Cc: Roland Dreier Signed-off-by: Nicholas Bellinger --- drivers/infiniband/ulp/srpt/ib_srpt.c | 2 +- drivers/scsi/qla2xxx/tcm_qla2xxx.c | 2 +- drivers/target/target_core_transport.c | 28 +++++----------------------- include/target/target_core_fabric.h | 2 +- 4 files changed, 8 insertions(+), 26 deletions(-) (limited to 'include') diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c index b08ca7a9f76b..564024e0123a 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.c +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c @@ -2328,7 +2328,7 @@ static void srpt_release_channel_work(struct work_struct *w) se_sess = ch->sess; BUG_ON(!se_sess); - target_wait_for_sess_cmds(se_sess, 0); + target_wait_for_sess_cmds(se_sess); transport_deregister_session_configfs(se_sess); transport_deregister_session(se_sess); diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c index d182c96e17ea..7a3870f385f6 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c @@ -1370,7 +1370,7 @@ static void tcm_qla2xxx_free_session(struct qla_tgt_sess *sess) dump_stack(); return; } - target_wait_for_sess_cmds(se_sess, 0); + target_wait_for_sess_cmds(se_sess); transport_deregister_session_configfs(sess->se_sess); transport_deregister_session(sess->se_sess); diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 4a793362309d..311c11349aab 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2263,14 +2263,10 @@ EXPORT_SYMBOL(target_sess_cmd_list_set_waiting); /* target_wait_for_sess_cmds - Wait for outstanding descriptors * @se_sess: session to wait for active I/O - * @wait_for_tasks: Make extra transport_wait_for_tasks call */ -void target_wait_for_sess_cmds( - struct se_session *se_sess, - int wait_for_tasks) +void target_wait_for_sess_cmds(struct se_session *se_sess) { struct se_cmd *se_cmd, *tmp_cmd; - bool rc = false; list_for_each_entry_safe(se_cmd, tmp_cmd, &se_sess->sess_cmd_list, se_cmd_list) { @@ -2280,24 +2276,10 @@ void target_wait_for_sess_cmds( " %d\n", se_cmd, se_cmd->t_state, se_cmd->se_tfo->get_cmd_state(se_cmd)); - if (wait_for_tasks) { - pr_debug("Calling transport_wait_for_tasks se_cmd: %p t_state: %d," - " fabric state: %d\n", se_cmd, se_cmd->t_state, - se_cmd->se_tfo->get_cmd_state(se_cmd)); - - rc = transport_wait_for_tasks(se_cmd); - - pr_debug("After transport_wait_for_tasks se_cmd: %p t_state: %d," - " fabric state: %d\n", se_cmd, se_cmd->t_state, - se_cmd->se_tfo->get_cmd_state(se_cmd)); - } - - if (!rc) { - wait_for_completion(&se_cmd->cmd_wait_comp); - pr_debug("After cmd_wait_comp: se_cmd: %p t_state: %d" - " fabric state: %d\n", se_cmd, se_cmd->t_state, - se_cmd->se_tfo->get_cmd_state(se_cmd)); - } + wait_for_completion(&se_cmd->cmd_wait_comp); + pr_debug("After cmd_wait_comp: se_cmd: %p t_state: %d" + " fabric state: %d\n", se_cmd, se_cmd->t_state, + se_cmd->se_tfo->get_cmd_state(se_cmd)); se_cmd->se_tfo->release_cmd(se_cmd); } diff --git a/include/target/target_core_fabric.h b/include/target/target_core_fabric.h index ba3471b73c07..8a26f0d55fd1 100644 --- a/include/target/target_core_fabric.h +++ b/include/target/target_core_fabric.h @@ -123,7 +123,7 @@ int transport_send_check_condition_and_sense(struct se_cmd *, int target_get_sess_cmd(struct se_session *, struct se_cmd *, bool); int target_put_sess_cmd(struct se_session *, struct se_cmd *); void target_sess_cmd_list_set_waiting(struct se_session *); -void target_wait_for_sess_cmds(struct se_session *, int); +void target_wait_for_sess_cmds(struct se_session *); int core_alua_check_nonop_delay(struct se_cmd *); -- cgit v1.2.3 From ec4602a9588a196fa1a9af46bfdd37cbf5792db4 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 16 May 2013 22:29:28 +0200 Subject: ACPI / PM: Allow device power states to be used for CONFIG_PM unset Currently, drivers/acpi/device_pm.c depends on CONFIG_PM and all of the functions defined in there are replaced with static inline stubs if that option is unset. However, CONFIG_PM means, roughly, "runtime PM or suspend/hibernation support" and some of those functions are useful regardless of that. For example, they are used by the ACPI fan driver for controlling fans and acpi_device_set_power() is called during device removal. Moreover, device initialization may depend on setting device power states properly. For these reasons, make the routines manipulating ACPI device power states defined in drivers/acpi/device_pm.c available for CONFIG_PM unset too. Reported-by: Zhang Rui Reported-and-tested-by: Michel Lespinasse Signed-off-by: Rafael J. Wysocki Cc: 3.9+ --- drivers/acpi/Makefile | 2 +- drivers/acpi/device_pm.c | 126 ++++++++++++++++++++++++----------------------- include/acpi/acpi_bus.h | 40 ++------------- 3 files changed, 70 insertions(+), 98 deletions(-) (limited to 'include') diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index ecb743bf05a5..7cad994ee44f 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -24,7 +24,7 @@ acpi-y += nvs.o # Power management related files acpi-y += wakeup.o acpi-y += sleep.o -acpi-$(CONFIG_PM) += device_pm.o +acpi-y += device_pm.o acpi-$(CONFIG_ACPI_SLEEP) += proc.o diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c index 96de787e6104..bc493aa3af19 100644 --- a/drivers/acpi/device_pm.c +++ b/drivers/acpi/device_pm.c @@ -37,68 +37,6 @@ #define _COMPONENT ACPI_POWER_COMPONENT ACPI_MODULE_NAME("device_pm"); -static DEFINE_MUTEX(acpi_pm_notifier_lock); - -/** - * acpi_add_pm_notifier - Register PM notifier for given ACPI device. - * @adev: ACPI device to add the notifier for. - * @context: Context information to pass to the notifier routine. - * - * NOTE: @adev need not be a run-wake or wakeup device to be a valid source of - * PM wakeup events. For example, wakeup events may be generated for bridges - * if one of the devices below the bridge is signaling wakeup, even if the - * bridge itself doesn't have a wakeup GPE associated with it. - */ -acpi_status acpi_add_pm_notifier(struct acpi_device *adev, - acpi_notify_handler handler, void *context) -{ - acpi_status status = AE_ALREADY_EXISTS; - - mutex_lock(&acpi_pm_notifier_lock); - - if (adev->wakeup.flags.notifier_present) - goto out; - - status = acpi_install_notify_handler(adev->handle, - ACPI_SYSTEM_NOTIFY, - handler, context); - if (ACPI_FAILURE(status)) - goto out; - - adev->wakeup.flags.notifier_present = true; - - out: - mutex_unlock(&acpi_pm_notifier_lock); - return status; -} - -/** - * acpi_remove_pm_notifier - Unregister PM notifier from given ACPI device. - * @adev: ACPI device to remove the notifier from. - */ -acpi_status acpi_remove_pm_notifier(struct acpi_device *adev, - acpi_notify_handler handler) -{ - acpi_status status = AE_BAD_PARAMETER; - - mutex_lock(&acpi_pm_notifier_lock); - - if (!adev->wakeup.flags.notifier_present) - goto out; - - status = acpi_remove_notify_handler(adev->handle, - ACPI_SYSTEM_NOTIFY, - handler); - if (ACPI_FAILURE(status)) - goto out; - - adev->wakeup.flags.notifier_present = false; - - out: - mutex_unlock(&acpi_pm_notifier_lock); - return status; -} - /** * acpi_power_state_string - String representation of ACPI device power state. * @state: ACPI device power state to return the string representation of. @@ -385,6 +323,69 @@ bool acpi_bus_power_manageable(acpi_handle handle) } EXPORT_SYMBOL(acpi_bus_power_manageable); +#ifdef CONFIG_PM +static DEFINE_MUTEX(acpi_pm_notifier_lock); + +/** + * acpi_add_pm_notifier - Register PM notifier for given ACPI device. + * @adev: ACPI device to add the notifier for. + * @context: Context information to pass to the notifier routine. + * + * NOTE: @adev need not be a run-wake or wakeup device to be a valid source of + * PM wakeup events. For example, wakeup events may be generated for bridges + * if one of the devices below the bridge is signaling wakeup, even if the + * bridge itself doesn't have a wakeup GPE associated with it. + */ +acpi_status acpi_add_pm_notifier(struct acpi_device *adev, + acpi_notify_handler handler, void *context) +{ + acpi_status status = AE_ALREADY_EXISTS; + + mutex_lock(&acpi_pm_notifier_lock); + + if (adev->wakeup.flags.notifier_present) + goto out; + + status = acpi_install_notify_handler(adev->handle, + ACPI_SYSTEM_NOTIFY, + handler, context); + if (ACPI_FAILURE(status)) + goto out; + + adev->wakeup.flags.notifier_present = true; + + out: + mutex_unlock(&acpi_pm_notifier_lock); + return status; +} + +/** + * acpi_remove_pm_notifier - Unregister PM notifier from given ACPI device. + * @adev: ACPI device to remove the notifier from. + */ +acpi_status acpi_remove_pm_notifier(struct acpi_device *adev, + acpi_notify_handler handler) +{ + acpi_status status = AE_BAD_PARAMETER; + + mutex_lock(&acpi_pm_notifier_lock); + + if (!adev->wakeup.flags.notifier_present) + goto out; + + status = acpi_remove_notify_handler(adev->handle, + ACPI_SYSTEM_NOTIFY, + handler); + if (ACPI_FAILURE(status)) + goto out; + + adev->wakeup.flags.notifier_present = false; + + out: + mutex_unlock(&acpi_pm_notifier_lock); + return status; +} + bool acpi_bus_can_wakeup(acpi_handle handle) { struct acpi_device *device; @@ -1023,3 +1024,4 @@ void acpi_dev_pm_remove_dependent(acpi_handle handle, struct device *depdev) mutex_unlock(&adev->physical_node_lock); } EXPORT_SYMBOL_GPL(acpi_dev_pm_remove_dependent); +#endif /* CONFIG_PM */ diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 98db31d9f9b4..636c59f2003a 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -377,7 +377,6 @@ acpi_status acpi_bus_get_status_handle(acpi_handle handle, unsigned long long *sta); int acpi_bus_get_status(struct acpi_device *device); -#ifdef CONFIG_PM int acpi_bus_set_power(acpi_handle handle, int state); const char *acpi_power_state_string(int state); int acpi_device_get_power(struct acpi_device *device, int *state); @@ -385,41 +384,12 @@ int acpi_device_set_power(struct acpi_device *device, int state); int acpi_bus_init_power(struct acpi_device *device); int acpi_bus_update_power(acpi_handle handle, int *state_p); bool acpi_bus_power_manageable(acpi_handle handle); + +#ifdef CONFIG_PM bool acpi_bus_can_wakeup(acpi_handle handle); -#else /* !CONFIG_PM */ -static inline int acpi_bus_set_power(acpi_handle handle, int state) -{ - return 0; -} -static inline const char *acpi_power_state_string(int state) -{ - return "D0"; -} -static inline int acpi_device_get_power(struct acpi_device *device, int *state) -{ - return 0; -} -static inline int acpi_device_set_power(struct acpi_device *device, int state) -{ - return 0; -} -static inline int acpi_bus_init_power(struct acpi_device *device) -{ - return 0; -} -static inline int acpi_bus_update_power(acpi_handle handle, int *state_p) -{ - return 0; -} -static inline bool acpi_bus_power_manageable(acpi_handle handle) -{ - return false; -} -static inline bool acpi_bus_can_wakeup(acpi_handle handle) -{ - return false; -} -#endif /* !CONFIG_PM */ +#else +static inline bool acpi_bus_can_wakeup(acpi_handle handle) { return false; } +#endif #ifdef CONFIG_ACPI_PROC_EVENT int acpi_bus_generate_proc_event(struct acpi_device *device, u8 type, int data); -- cgit v1.2.3 From 154c2670087bd7f54688274aca627433e4a7c181 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 10:51:10 +0200 Subject: Add include dependencies to . MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If has not been included before , a build error like the below one will result: CC arch/mips/kernel/idle.o In file included from arch/mips/kernel/idle.c:17:0: include/linux/printk.h:109:1: error: data definition has no type or storage class [-Werror] include/linux/printk.h:109:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int] include/linux/printk.h:110:1: error: ‘format’ attribute only applies to function types [-Werror=attributes] include/linux/printk.h:110:1: error: expected ‘,’ or ‘;’ before ‘int’ include/linux/printk.h:114:1: error: data definition has no type or storage class [-Werror] include/linux/printk.h:114:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int] include/linux/printk.h:115:1: error: ‘format’ attribute only applies to function types [-Werror=attributes] include/linux/printk.h:115:1: error: expected ‘,’ or ‘;’ before ‘int’ include/linux/printk.h:117:1: error: data definition has no type or storage class [-Werror] include/linux/printk.h:117:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int] include/linux/printk.h:118:1: error: ‘format’ attribute only applies to function types [-Werror=attributes] include/linux/printk.h:118:1: error: ‘__cold__’ attribute ignored [-Werror=attributes] include/linux/printk.h:118:1: error: expected ‘,’ or ‘;’ before ‘asmlinkage’ include/linux/printk.h:122:1: error: data definition has no type or storage class [-Werror] include/linux/printk.h:122:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int] include/linux/printk.h:123:1: error: ‘format’ attribute only applies to function types [-Werror=attributes] include/linux/printk.h:123:1: error: ‘__cold__’ attribute ignored [-Werror=attributes] include/linux/printk.h:123:1: error: expected ‘,’ or ‘;’ before ‘int’ In file included from include/linux/kernel.h:14:0, from include/linux/sched.h:15, from arch/mips/kernel/idle.c:18: include/linux/dynamic_debug.h: In function ‘ddebug_dyndbg_module_param_cb’: include/linux/dynamic_debug.h:124:3: error: implicit declaration of function ‘printk’ [-Werror=implicit-function-declaration] Fixed by including . Signed-off-by: Ralf Baechle --- include/linux/printk.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/printk.h b/include/linux/printk.h index 6af944ab38f0..22c7052e9372 100644 --- a/include/linux/printk.h +++ b/include/linux/printk.h @@ -4,6 +4,7 @@ #include #include #include +#include extern const char linux_banner[]; extern const char linux_proc_banner[]; -- cgit v1.2.3 From 576ebd74928fd60ae112b33c42b89602015fadbd Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Tue, 21 May 2013 16:08:22 +0200 Subject: kernel: Fix s390 absolute memory access for /dev/mem On s390 the prefix page and absolute zero pages are not correctly returned when reading /dev/mem. The reason is that the s390 asm/io.h file includes the asm-generic/io.h file which then defines xlate_dev_mem_ptr() and therefore overwrites the s390 specific version that does the correct swap operation for prefix and absolute zero pages. The problem is a regression that was introduced with git commit cd248341 (s390/pci: base support). To fix the problem add "#ifndef xlate_dev_mem_ptr" in asm-generic/io.h and "#define xlate_dev_mem_ptr" in asm/io.h. This ensures that the s390 version is used. For completeness also add the "#ifndef" construct for xlate_dev_kmem_ptr(). Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/io.h | 1 + include/asm-generic/io.h | 4 ++++ 2 files changed, 5 insertions(+) (limited to 'include') diff --git a/arch/s390/include/asm/io.h b/arch/s390/include/asm/io.h index 379d96e2105e..fd9be010f9b2 100644 --- a/arch/s390/include/asm/io.h +++ b/arch/s390/include/asm/io.h @@ -36,6 +36,7 @@ static inline void * phys_to_virt(unsigned long address) } void *xlate_dev_mem_ptr(unsigned long phys); +#define xlate_dev_mem_ptr xlate_dev_mem_ptr void unxlate_dev_mem_ptr(unsigned long phys, void *addr); /* diff --git a/include/asm-generic/io.h b/include/asm-generic/io.h index ac9da00e9f2c..d5afe96adba6 100644 --- a/include/asm-generic/io.h +++ b/include/asm-generic/io.h @@ -343,8 +343,12 @@ extern void ioport_unmap(void __iomem *p); #endif /* CONFIG_GENERIC_IOMAP */ #endif /* CONFIG_HAS_IOPORT */ +#ifndef xlate_dev_kmem_ptr #define xlate_dev_kmem_ptr(p) p +#endif +#ifndef xlate_dev_mem_ptr #define xlate_dev_mem_ptr(p) __va(p) +#endif #ifdef CONFIG_VIRT_TO_BUS #ifndef virt_to_bus -- cgit v1.2.3 From 591a0ac7f14aae6bf11b1cb6b5a68480bd644ddb Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 23 May 2013 12:07:50 +0300 Subject: OMAPDSS: Fix crash with DT boot When booting with DT, there's a crash when omapfb is probed. This is caused by the fact that omapdss+DT is not yet supported, and thus omapdss is not probed at all. On the other hand, omapfb is always probed. When omapfb tries to use omapdss, there's a NULL pointer dereference crash. The same error should most likely happen with omapdrm and omap_vout also. To fix this, add an "initialized" state to omapdss. When omapdss has been probed, it's marked as initialized. omapfb, omapdrm and omap_vout check this state when they are probed to see that omapdss is actually there. Signed-off-by: Tomi Valkeinen Tested-by: Peter Ujfalusi --- drivers/gpu/drm/omapdrm/omap_drv.c | 3 +++ drivers/media/platform/omap/omap_vout.c | 3 +++ drivers/video/omap2/dss/core.c | 20 +++++++++++++++++++- drivers/video/omap2/omapfb/omapfb-main.c | 3 +++ include/video/omapdss.h | 1 + 5 files changed, 29 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c index 079c54c6f94c..902074bbd1f4 100644 --- a/drivers/gpu/drm/omapdrm/omap_drv.c +++ b/drivers/gpu/drm/omapdrm/omap_drv.c @@ -548,6 +548,9 @@ static void pdev_shutdown(struct platform_device *device) static int pdev_probe(struct platform_device *device) { + if (omapdss_is_initialized() == false) + return -EPROBE_DEFER; + DBG("%s", device->name); return drm_platform_init(&omap_drm_driver, device); } diff --git a/drivers/media/platform/omap/omap_vout.c b/drivers/media/platform/omap/omap_vout.c index 96c4a17e4280..0a489bd29d6b 100644 --- a/drivers/media/platform/omap/omap_vout.c +++ b/drivers/media/platform/omap/omap_vout.c @@ -2144,6 +2144,9 @@ static int __init omap_vout_probe(struct platform_device *pdev) struct omap_dss_device *def_display; struct omap2video_device *vid_dev = NULL; + if (omapdss_is_initialized() == false) + return -EPROBE_DEFER; + ret = omapdss_compat_init(); if (ret) { dev_err(&pdev->dev, "failed to init dss\n"); diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c index f8779d4750ba..f49ddb9e7c82 100644 --- a/drivers/video/omap2/dss/core.c +++ b/drivers/video/omap2/dss/core.c @@ -53,6 +53,8 @@ static char *def_disp_name; module_param_named(def_disp, def_disp_name, charp, 0); MODULE_PARM_DESC(def_disp, "default display name"); +static bool dss_initialized; + const char *omapdss_get_default_display_name(void) { return core.default_display_name; @@ -66,6 +68,12 @@ enum omapdss_version omapdss_get_version(void) } EXPORT_SYMBOL(omapdss_get_version); +bool omapdss_is_initialized(void) +{ + return dss_initialized; +} +EXPORT_SYMBOL(omapdss_is_initialized); + struct platform_device *dss_get_core_pdev(void) { return core.pdev; @@ -606,6 +614,8 @@ static int __init omap_dss_init(void) return r; } + dss_initialized = true; + return 0; } @@ -636,7 +646,15 @@ static int __init omap_dss_init(void) static int __init omap_dss_init2(void) { - return omap_dss_register_drivers(); + int r; + + r = omap_dss_register_drivers(); + if (r) + return r; + + dss_initialized = true; + + return 0; } core_initcall(omap_dss_init); diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c index 717f13a93351..bb5f9fee3659 100644 --- a/drivers/video/omap2/omapfb/omapfb-main.c +++ b/drivers/video/omap2/omapfb/omapfb-main.c @@ -2416,6 +2416,9 @@ static int __init omapfb_probe(struct platform_device *pdev) DBG("omapfb_probe\n"); + if (omapdss_is_initialized() == false) + return -EPROBE_DEFER; + if (pdev->num_resources != 0) { dev_err(&pdev->dev, "probed for an unknown device\n"); r = -ENODEV; diff --git a/include/video/omapdss.h b/include/video/omapdss.h index caefa093337d..9b52340ec3ff 100644 --- a/include/video/omapdss.h +++ b/include/video/omapdss.h @@ -741,6 +741,7 @@ struct omap_dss_driver { }; enum omapdss_version omapdss_get_version(void); +bool omapdss_is_initialized(void); int omap_dss_register_driver(struct omap_dss_driver *); void omap_dss_unregister_driver(struct omap_dss_driver *); -- cgit v1.2.3 From 2a7851bffb008ff4882eee673da74718997b4265 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 17 May 2013 03:56:10 +0000 Subject: netfilter: add nf_ipv6_ops hook to fix xt_addrtype with IPv6 Quoting https://bugzilla.netfilter.org/show_bug.cgi?id=812: [ ip6tables -m addrtype ] When I tried to use in the nat/PREROUTING it messes up the routing cache even if the rule didn't matched at all. [..] If I remove the --limit-iface-in from the non-working scenario, so just use the -m addrtype --dst-type LOCAL it works! This happens when LOCAL type matching is requested with --limit-iface-in, and the default ipv6 route is via the interface the packet we test arrived on. Because xt_addrtype uses ip6_route_output, the ipv6 routing implementation creates an unwanted cached entry, and the packet won't make it to the real/expected destination. Silently ignoring --limit-iface-in makes the routing work but it breaks rule matching (--dst-type LOCAL with limit-iface-in is supposed to only match if the dst address is configured on the incoming interface; without --limit-iface-in it will match if the address is reachable via lo). The test should call ipv6_chk_addr() instead. However, this would add a link-time dependency on ipv6. There are two possible solutions: 1) Revert the commit that moved ipt_addrtype to xt_addrtype, and put ipv6 specific code into ip6t_addrtype. 2) add new "nf_ipv6_ops" struct to register pointers to ipv6 functions. While the former might seem preferable, Pablo pointed out that there are more xt modules with link-time dependeny issues regarding ipv6, so lets go for 2). Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter_ipv6.h | 16 ++++++++++++++++ include/net/addrconf.h | 2 +- net/ipv6/addrconf.c | 2 +- net/ipv6/netfilter.c | 7 +++++++ net/netfilter/core.c | 2 ++ net/netfilter/xt_addrtype.c | 27 ++++++++++++++++----------- 6 files changed, 43 insertions(+), 13 deletions(-) (limited to 'include') diff --git a/include/linux/netfilter_ipv6.h b/include/linux/netfilter_ipv6.h index 98ffb54988b6..2d4df6ce043e 100644 --- a/include/linux/netfilter_ipv6.h +++ b/include/linux/netfilter_ipv6.h @@ -17,6 +17,22 @@ extern __sum16 nf_ip6_checksum(struct sk_buff *skb, unsigned int hook, extern int ipv6_netfilter_init(void); extern void ipv6_netfilter_fini(void); + +/* + * Hook functions for ipv6 to allow xt_* modules to be built-in even + * if IPv6 is a module. + */ +struct nf_ipv6_ops { + int (*chk_addr)(struct net *net, const struct in6_addr *addr, + const struct net_device *dev, int strict); +}; + +extern const struct nf_ipv6_ops __rcu *nf_ipv6_ops; +static inline const struct nf_ipv6_ops *nf_get_ipv6_ops(void) +{ + return rcu_dereference(nf_ipv6_ops); +} + #else /* CONFIG_NETFILTER */ static inline int ipv6_netfilter_init(void) { return 0; } static inline void ipv6_netfilter_fini(void) { return; } diff --git a/include/net/addrconf.h b/include/net/addrconf.h index 84a6440f1f19..21f702704f24 100644 --- a/include/net/addrconf.h +++ b/include/net/addrconf.h @@ -65,7 +65,7 @@ extern int addrconf_set_dstaddr(struct net *net, extern int ipv6_chk_addr(struct net *net, const struct in6_addr *addr, - struct net_device *dev, + const struct net_device *dev, int strict); #if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index d1ab6ab29a55..d1b2d8034b54 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -1487,7 +1487,7 @@ static int ipv6_count_addresses(struct inet6_dev *idev) } int ipv6_chk_addr(struct net *net, const struct in6_addr *addr, - struct net_device *dev, int strict) + const struct net_device *dev, int strict) { struct inet6_ifaddr *ifp; unsigned int hash = inet6_addr_hash(addr); diff --git a/net/ipv6/netfilter.c b/net/ipv6/netfilter.c index 72836f40b730..95f3f1da0d7f 100644 --- a/net/ipv6/netfilter.c +++ b/net/ipv6/netfilter.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -186,6 +187,10 @@ static __sum16 nf_ip6_checksum_partial(struct sk_buff *skb, unsigned int hook, return csum; }; +static const struct nf_ipv6_ops ipv6ops = { + .chk_addr = ipv6_chk_addr, +}; + static const struct nf_afinfo nf_ip6_afinfo = { .family = AF_INET6, .checksum = nf_ip6_checksum, @@ -198,6 +203,7 @@ static const struct nf_afinfo nf_ip6_afinfo = { int __init ipv6_netfilter_init(void) { + RCU_INIT_POINTER(nf_ipv6_ops, &ipv6ops); return nf_register_afinfo(&nf_ip6_afinfo); } @@ -206,5 +212,6 @@ int __init ipv6_netfilter_init(void) */ void ipv6_netfilter_fini(void) { + RCU_INIT_POINTER(nf_ipv6_ops, NULL); nf_unregister_afinfo(&nf_ip6_afinfo); } diff --git a/net/netfilter/core.c b/net/netfilter/core.c index 07c865a31a3d..857ca9f35177 100644 --- a/net/netfilter/core.c +++ b/net/netfilter/core.c @@ -30,6 +30,8 @@ static DEFINE_MUTEX(afinfo_mutex); const struct nf_afinfo __rcu *nf_afinfo[NFPROTO_NUMPROTO] __read_mostly; EXPORT_SYMBOL(nf_afinfo); +const struct nf_ipv6_ops __rcu *nf_ipv6_ops __read_mostly; +EXPORT_SYMBOL_GPL(nf_ipv6_ops); int nf_register_afinfo(const struct nf_afinfo *afinfo) { diff --git a/net/netfilter/xt_addrtype.c b/net/netfilter/xt_addrtype.c index 49c5ff7f6dd6..68ff29f60867 100644 --- a/net/netfilter/xt_addrtype.c +++ b/net/netfilter/xt_addrtype.c @@ -22,6 +22,7 @@ #include #endif +#include #include #include @@ -33,12 +34,12 @@ MODULE_ALIAS("ip6t_addrtype"); #if IS_ENABLED(CONFIG_IP6_NF_IPTABLES) static u32 match_lookup_rt6(struct net *net, const struct net_device *dev, - const struct in6_addr *addr) + const struct in6_addr *addr, u16 mask) { const struct nf_afinfo *afinfo; struct flowi6 flow; struct rt6_info *rt; - u32 ret; + u32 ret = 0; int route_err; memset(&flow, 0, sizeof(flow)); @@ -49,12 +50,19 @@ static u32 match_lookup_rt6(struct net *net, const struct net_device *dev, rcu_read_lock(); afinfo = nf_get_afinfo(NFPROTO_IPV6); - if (afinfo != NULL) + if (afinfo != NULL) { + const struct nf_ipv6_ops *v6ops; + + if (dev && (mask & XT_ADDRTYPE_LOCAL)) { + v6ops = nf_get_ipv6_ops(); + if (v6ops && v6ops->chk_addr(net, addr, dev, true)) + ret = XT_ADDRTYPE_LOCAL; + } route_err = afinfo->route(net, (struct dst_entry **)&rt, - flowi6_to_flowi(&flow), !!dev); - else + flowi6_to_flowi(&flow), false); + } else { route_err = 1; - + } rcu_read_unlock(); if (route_err) @@ -62,15 +70,12 @@ static u32 match_lookup_rt6(struct net *net, const struct net_device *dev, if (rt->rt6i_flags & RTF_REJECT) ret = XT_ADDRTYPE_UNREACHABLE; - else - ret = 0; - if (rt->rt6i_flags & RTF_LOCAL) + if (dev == NULL && rt->rt6i_flags & RTF_LOCAL) ret |= XT_ADDRTYPE_LOCAL; if (rt->rt6i_flags & RTF_ANYCAST) ret |= XT_ADDRTYPE_ANYCAST; - dst_release(&rt->dst); return ret; } @@ -90,7 +95,7 @@ static bool match_type6(struct net *net, const struct net_device *dev, if ((XT_ADDRTYPE_LOCAL | XT_ADDRTYPE_ANYCAST | XT_ADDRTYPE_UNREACHABLE) & mask) - return !!(mask & match_lookup_rt6(net, dev, addr)); + return !!(mask & match_lookup_rt6(net, dev, addr, mask)); return true; } -- cgit v1.2.3 From 7805d000db30a3787a4c969bab6ae4d8a5fd8ce6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 24 May 2013 10:50:24 +0900 Subject: cgroup: fix a subtle bug in descendant pre-order walk When cgroup_next_descendant_pre() initiates a walk, it checks whether the subtree root doesn't have any children and if not returns NULL. Later code assumes that the subtree isn't empty. This is broken because the subtree may become empty inbetween, which can lead to the traversal escaping the subtree by walking to the sibling of the subtree root. There's no reason to have the early exit path. Remove it along with the later assumption that the subtree isn't empty. This simplifies the code a bit and fixes the subtle bug. While at it, fix the comment of cgroup_for_each_descendant_pre() which was incorrectly referring to ->css_offline() instead of ->css_online(). Signed-off-by: Tejun Heo Reviewed-by: Michal Hocko Cc: stable@vger.kernel.org --- include/linux/cgroup.h | 2 +- kernel/cgroup.c | 9 +++------ 2 files changed, 4 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index 5047355b9a0f..8bda1294c035 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -707,7 +707,7 @@ struct cgroup *cgroup_rightmost_descendant(struct cgroup *pos); * * If a subsystem synchronizes against the parent in its ->css_online() and * before starting iterating, and synchronizes against @pos on each - * iteration, any descendant cgroup which finished ->css_offline() is + * iteration, any descendant cgroup which finished ->css_online() is * guaranteed to be visible in the future iterations. * * In other words, the following guarantees that a descendant can't escape diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 38b136553044..31e9ef319070 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -2954,11 +2954,8 @@ struct cgroup *cgroup_next_descendant_pre(struct cgroup *pos, WARN_ON_ONCE(!rcu_read_lock_held()); /* if first iteration, pretend we just visited @cgroup */ - if (!pos) { - if (list_empty(&cgroup->children)) - return NULL; + if (!pos) pos = cgroup; - } /* visit the first child if exists */ next = list_first_or_null_rcu(&pos->children, struct cgroup, sibling); @@ -2966,14 +2963,14 @@ struct cgroup *cgroup_next_descendant_pre(struct cgroup *pos, return next; /* no child, visit my or the closest ancestor's next sibling */ - do { + while (pos != cgroup) { next = list_entry_rcu(pos->sibling.next, struct cgroup, sibling); if (&next->sibling != &pos->parent->children) return next; pos = pos->parent; - } while (pos != cgroup); + } return NULL; } -- cgit v1.2.3 From a11650e11093ed57dca78bf16e7836517c599098 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Fri, 24 May 2013 15:55:05 -0700 Subject: rapidio: make enumeration/discovery configurable Systems that use RapidIO fabric may need to implement their own enumeration and discovery methods which are better suitable for needs of a target application. The following set of patches is intended to simplify process of introduction of new RapidIO fabric enumeration/discovery methods. The first patch offers ability to add new RapidIO enumeration/discovery methods using kernel configuration options. This new configuration option mechanism allows to select statically linked or modular enumeration/discovery method(s) from the list of existing methods or use external module(s). This patch also updates the currently existing enumeration/discovery code to be used as a statically linked or modular method. The corresponding configuration option is named "Basic enumeration/discovery" method. This is the only one configuration option available today but new methods are expected to be introduced after adoption of provided patches. The second patch address a long time complaint of RapidIO subsystem users regarding fabric enumeration/discovery start sequence. Existing implementation offers only a boot-time enumeration/discovery start which requires synchronized boot of all endpoints in RapidIO network. While it works for small closed configurations with limited number of endpoints, using this approach in systems with large number of endpoints is quite challenging. To eliminate requirement for synchronized start the second patch introduces RapidIO enumeration/discovery start from user space. For compatibility with the existing RapidIO subsystem implementation, automatic boot time enumeration/discovery start can be configured in by specifying "rio-scan.scan=1" command line parameter if statically linked basic enumeration method is selected. This patch: Rework to implement RapidIO enumeration/discovery method selection combined with ability to use enumeration/discovery as a kernel module. This patch adds ability to introduce new RapidIO enumeration/discovery methods using kernel configuration options. Configuration option mechanism allows to select statically linked or modular enumeration/discovery method from the list of existing methods or use external modules. If a modular enumeration/discovery is selected each RapidIO mport device can have its own method attached to it. The existing enumeration/discovery code was updated to be used as statically linked or modular method. This configuration option is named "Basic enumeration/discovery" method. Several common routines have been moved from rio-scan.c to make them available to other enumeration methods and reduce number of exported symbols. Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Li Yang Cc: Kumar Gala Cc: Andre van Herk Cc: Micha Nelissen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rapidio/Kconfig | 20 ++++ drivers/rapidio/Makefile | 3 +- drivers/rapidio/rio-driver.c | 7 ++ drivers/rapidio/rio-scan.c | 166 ++++++++------------------------ drivers/rapidio/rio.c | 222 +++++++++++++++++++++++++++++++++++++++++-- drivers/rapidio/rio.h | 11 ++- include/linux/rio.h | 13 ++- include/linux/rio_drv.h | 1 + 8 files changed, 304 insertions(+), 139 deletions(-) (limited to 'include') diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig index 6194d35ebb97..5ab056494bbe 100644 --- a/drivers/rapidio/Kconfig +++ b/drivers/rapidio/Kconfig @@ -47,4 +47,24 @@ config RAPIDIO_DEBUG If you are unsure about this, say N here. +choice + prompt "Enumeration method" + depends on RAPIDIO + default RAPIDIO_ENUM_BASIC + help + There are different enumeration and discovery mechanisms offered + for RapidIO subsystem. You may select single built-in method or + or any number of methods to be built as modules. + Selecting a built-in method disables use of loadable methods. + + If unsure, select Basic built-in. + +config RAPIDIO_ENUM_BASIC + tristate "Basic" + help + This option includes basic RapidIO fabric enumeration and discovery + mechanism similar to one described in RapidIO specification Annex 1. + +endchoice + source "drivers/rapidio/switches/Kconfig" diff --git a/drivers/rapidio/Makefile b/drivers/rapidio/Makefile index ec3fb8121004..3036702ffe8b 100644 --- a/drivers/rapidio/Makefile +++ b/drivers/rapidio/Makefile @@ -1,7 +1,8 @@ # # Makefile for RapidIO interconnect services # -obj-y += rio.o rio-access.o rio-driver.o rio-scan.o rio-sysfs.o +obj-y += rio.o rio-access.o rio-driver.o rio-sysfs.o +obj-$(CONFIG_RAPIDIO_ENUM_BASIC) += rio-scan.o obj-$(CONFIG_RAPIDIO) += switches/ obj-$(CONFIG_RAPIDIO) += devices/ diff --git a/drivers/rapidio/rio-driver.c b/drivers/rapidio/rio-driver.c index 0f4a53bdaa3c..55850bb21480 100644 --- a/drivers/rapidio/rio-driver.c +++ b/drivers/rapidio/rio-driver.c @@ -164,6 +164,13 @@ void rio_unregister_driver(struct rio_driver *rdrv) driver_unregister(&rdrv->driver); } +void rio_attach_device(struct rio_dev *rdev) +{ + rdev->dev.bus = &rio_bus_type; + rdev->dev.parent = &rio_bus; +} +EXPORT_SYMBOL_GPL(rio_attach_device); + /** * rio_match_bus - Tell if a RIO device structure has a matching RIO driver device id structure * @dev: the standard device structure to match against diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c index a965acd3c0e4..7bdc67419cc3 100644 --- a/drivers/rapidio/rio-scan.c +++ b/drivers/rapidio/rio-scan.c @@ -37,12 +37,8 @@ #include "rio.h" -LIST_HEAD(rio_devices); - static void rio_init_em(struct rio_dev *rdev); -DEFINE_SPINLOCK(rio_global_list_lock); - static int next_destid = 0; static int next_comptag = 1; @@ -326,127 +322,6 @@ static int rio_is_switch(struct rio_dev *rdev) return 0; } -/** - * rio_switch_init - Sets switch operations for a particular vendor switch - * @rdev: RIO device - * @do_enum: Enumeration/Discovery mode flag - * - * Searches the RIO switch ops table for known switch types. If the vid - * and did match a switch table entry, then call switch initialization - * routine to setup switch-specific routines. - */ -static void rio_switch_init(struct rio_dev *rdev, int do_enum) -{ - struct rio_switch_ops *cur = __start_rio_switch_ops; - struct rio_switch_ops *end = __end_rio_switch_ops; - - while (cur < end) { - if ((cur->vid == rdev->vid) && (cur->did == rdev->did)) { - pr_debug("RIO: calling init routine for %s\n", - rio_name(rdev)); - cur->init_hook(rdev, do_enum); - break; - } - cur++; - } - - if ((cur >= end) && (rdev->pef & RIO_PEF_STD_RT)) { - pr_debug("RIO: adding STD routing ops for %s\n", - rio_name(rdev)); - rdev->rswitch->add_entry = rio_std_route_add_entry; - rdev->rswitch->get_entry = rio_std_route_get_entry; - rdev->rswitch->clr_table = rio_std_route_clr_table; - } - - if (!rdev->rswitch->add_entry || !rdev->rswitch->get_entry) - printk(KERN_ERR "RIO: missing routing ops for %s\n", - rio_name(rdev)); -} - -/** - * rio_add_device- Adds a RIO device to the device model - * @rdev: RIO device - * - * Adds the RIO device to the global device list and adds the RIO - * device to the RIO device list. Creates the generic sysfs nodes - * for an RIO device. - */ -static int rio_add_device(struct rio_dev *rdev) -{ - int err; - - err = device_add(&rdev->dev); - if (err) - return err; - - spin_lock(&rio_global_list_lock); - list_add_tail(&rdev->global_list, &rio_devices); - spin_unlock(&rio_global_list_lock); - - rio_create_sysfs_dev_files(rdev); - - return 0; -} - -/** - * rio_enable_rx_tx_port - enable input receiver and output transmitter of - * given port - * @port: Master port associated with the RIO network - * @local: local=1 select local port otherwise a far device is reached - * @destid: Destination ID of the device to check host bit - * @hopcount: Number of hops to reach the target - * @port_num: Port (-number on switch) to enable on a far end device - * - * Returns 0 or 1 from on General Control Command and Status Register - * (EXT_PTR+0x3C) - */ -inline int rio_enable_rx_tx_port(struct rio_mport *port, - int local, u16 destid, - u8 hopcount, u8 port_num) { -#ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS - u32 regval; - u32 ext_ftr_ptr; - - /* - * enable rx input tx output port - */ - pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = " - "%d, port_num = %d)\n", local, destid, hopcount, port_num); - - ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, hopcount); - - if (local) { - rio_local_read_config_32(port, ext_ftr_ptr + - RIO_PORT_N_CTL_CSR(0), - ®val); - } else { - if (rio_mport_read_config_32(port, destid, hopcount, - ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), ®val) < 0) - return -EIO; - } - - if (regval & RIO_PORT_N_CTL_P_TYP_SER) { - /* serial */ - regval = regval | RIO_PORT_N_CTL_EN_RX_SER - | RIO_PORT_N_CTL_EN_TX_SER; - } else { - /* parallel */ - regval = regval | RIO_PORT_N_CTL_EN_RX_PAR - | RIO_PORT_N_CTL_EN_TX_PAR; - } - - if (local) { - rio_local_write_config_32(port, ext_ftr_ptr + - RIO_PORT_N_CTL_CSR(0), regval); - } else { - if (rio_mport_write_config_32(port, destid, hopcount, - ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), regval) < 0) - return -EIO; - } -#endif - return 0; -} - /** * rio_setup_device- Allocates and sets up a RIO device * @net: RIO network @@ -587,8 +462,7 @@ static struct rio_dev *rio_setup_device(struct rio_net *net, rdev->destid); } - rdev->dev.bus = &rio_bus_type; - rdev->dev.parent = &rio_bus; + rio_attach_device(rdev); device_initialize(&rdev->dev); rdev->dev.release = rio_release_dev; @@ -1421,3 +1295,41 @@ enum_done: bail: return -EBUSY; } + +static struct rio_scan rio_scan_ops = { + .enumerate = rio_enum_mport, + .discover = rio_disc_mport, +}; + +static bool scan; +module_param(scan, bool, 0); +MODULE_PARM_DESC(scan, "Start RapidIO network enumeration/discovery " + "(default = 0)"); + +/** + * rio_basic_attach: + * + * When this enumeration/discovery method is loaded as a module this function + * registers its specific enumeration and discover routines for all available + * RapidIO mport devices. The "scan" command line parameter controls ability of + * the module to start RapidIO enumeration/discovery automatically. + * + * Returns 0 for success or -EIO if unable to register itself. + * + * This enumeration/discovery method cannot be unloaded and therefore does not + * provide a matching cleanup_module routine. + */ + +static int __init rio_basic_attach(void) +{ + if (rio_register_scan(RIO_MPORT_ANY, &rio_scan_ops)) + return -EIO; + if (scan) + rio_init_mports(); + return 0; +} + +late_initcall(rio_basic_attach); + +MODULE_DESCRIPTION("Basic RapidIO enumeration/discovery"); +MODULE_LICENSE("GPL"); diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c index d553b5d13722..6e75dda34799 100644 --- a/drivers/rapidio/rio.c +++ b/drivers/rapidio/rio.c @@ -31,7 +31,11 @@ #include "rio.h" +static LIST_HEAD(rio_devices); +static DEFINE_SPINLOCK(rio_global_list_lock); + static LIST_HEAD(rio_mports); +static DEFINE_MUTEX(rio_mport_list_lock); static unsigned char next_portid; static DEFINE_SPINLOCK(rio_mmap_lock); @@ -52,6 +56,32 @@ u16 rio_local_get_device_id(struct rio_mport *port) return (RIO_GET_DID(port->sys_size, result)); } +/** + * rio_add_device- Adds a RIO device to the device model + * @rdev: RIO device + * + * Adds the RIO device to the global device list and adds the RIO + * device to the RIO device list. Creates the generic sysfs nodes + * for an RIO device. + */ +int rio_add_device(struct rio_dev *rdev) +{ + int err; + + err = device_add(&rdev->dev); + if (err) + return err; + + spin_lock(&rio_global_list_lock); + list_add_tail(&rdev->global_list, &rio_devices); + spin_unlock(&rio_global_list_lock); + + rio_create_sysfs_dev_files(rdev); + + return 0; +} +EXPORT_SYMBOL_GPL(rio_add_device); + /** * rio_request_inb_mbox - request inbound mailbox service * @mport: RIO master port from which to allocate the mailbox resource @@ -489,6 +519,7 @@ rio_mport_get_physefb(struct rio_mport *port, int local, return ext_ftr_ptr; } +EXPORT_SYMBOL_GPL(rio_mport_get_physefb); /** * rio_get_comptag - Begin or continue searching for a RIO device by component tag @@ -521,6 +552,7 @@ exit: spin_unlock(&rio_global_list_lock); return rdev; } +EXPORT_SYMBOL_GPL(rio_get_comptag); /** * rio_set_port_lockout - Sets/clears LOCKOUT bit (RIO EM 1.3) for a switch port. @@ -545,6 +577,107 @@ int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock) regval); return 0; } +EXPORT_SYMBOL_GPL(rio_set_port_lockout); + +/** + * rio_switch_init - Sets switch operations for a particular vendor switch + * @rdev: RIO device + * @do_enum: Enumeration/Discovery mode flag + * + * Searches the RIO switch ops table for known switch types. If the vid + * and did match a switch table entry, then call switch initialization + * routine to setup switch-specific routines. + */ +void rio_switch_init(struct rio_dev *rdev, int do_enum) +{ + struct rio_switch_ops *cur = __start_rio_switch_ops; + struct rio_switch_ops *end = __end_rio_switch_ops; + + while (cur < end) { + if ((cur->vid == rdev->vid) && (cur->did == rdev->did)) { + pr_debug("RIO: calling init routine for %s\n", + rio_name(rdev)); + cur->init_hook(rdev, do_enum); + break; + } + cur++; + } + + if ((cur >= end) && (rdev->pef & RIO_PEF_STD_RT)) { + pr_debug("RIO: adding STD routing ops for %s\n", + rio_name(rdev)); + rdev->rswitch->add_entry = rio_std_route_add_entry; + rdev->rswitch->get_entry = rio_std_route_get_entry; + rdev->rswitch->clr_table = rio_std_route_clr_table; + } + + if (!rdev->rswitch->add_entry || !rdev->rswitch->get_entry) + printk(KERN_ERR "RIO: missing routing ops for %s\n", + rio_name(rdev)); +} +EXPORT_SYMBOL_GPL(rio_switch_init); + +/** + * rio_enable_rx_tx_port - enable input receiver and output transmitter of + * given port + * @port: Master port associated with the RIO network + * @local: local=1 select local port otherwise a far device is reached + * @destid: Destination ID of the device to check host bit + * @hopcount: Number of hops to reach the target + * @port_num: Port (-number on switch) to enable on a far end device + * + * Returns 0 or 1 from on General Control Command and Status Register + * (EXT_PTR+0x3C) + */ +int rio_enable_rx_tx_port(struct rio_mport *port, + int local, u16 destid, + u8 hopcount, u8 port_num) +{ +#ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS + u32 regval; + u32 ext_ftr_ptr; + + /* + * enable rx input tx output port + */ + pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = " + "%d, port_num = %d)\n", local, destid, hopcount, port_num); + + ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, hopcount); + + if (local) { + rio_local_read_config_32(port, ext_ftr_ptr + + RIO_PORT_N_CTL_CSR(0), + ®val); + } else { + if (rio_mport_read_config_32(port, destid, hopcount, + ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), ®val) < 0) + return -EIO; + } + + if (regval & RIO_PORT_N_CTL_P_TYP_SER) { + /* serial */ + regval = regval | RIO_PORT_N_CTL_EN_RX_SER + | RIO_PORT_N_CTL_EN_TX_SER; + } else { + /* parallel */ + regval = regval | RIO_PORT_N_CTL_EN_RX_PAR + | RIO_PORT_N_CTL_EN_TX_PAR; + } + + if (local) { + rio_local_write_config_32(port, ext_ftr_ptr + + RIO_PORT_N_CTL_CSR(0), regval); + } else { + if (rio_mport_write_config_32(port, destid, hopcount, + ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), regval) < 0) + return -EIO; + } +#endif + return 0; +} +EXPORT_SYMBOL_GPL(rio_enable_rx_tx_port); + /** * rio_chk_dev_route - Validate route to the specified device. @@ -610,6 +743,7 @@ rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid, u8 hopcount) return 0; } +EXPORT_SYMBOL_GPL(rio_mport_chk_dev_access); /** * rio_chk_dev_access - Validate access to the specified device. @@ -941,6 +1075,7 @@ rio_mport_get_efb(struct rio_mport *port, int local, u16 destid, return RIO_GET_BLOCK_ID(reg_val); } } +EXPORT_SYMBOL_GPL(rio_mport_get_efb); /** * rio_mport_get_feature - query for devices' extended features @@ -997,6 +1132,7 @@ rio_mport_get_feature(struct rio_mport * port, int local, u16 destid, return 0; } +EXPORT_SYMBOL_GPL(rio_mport_get_feature); /** * rio_get_asm - Begin or continue searching for a RIO device by vid/did/asm_vid/asm_did @@ -1246,6 +1382,71 @@ EXPORT_SYMBOL_GPL(rio_dma_prep_slave_sg); #endif /* CONFIG_RAPIDIO_DMA_ENGINE */ +/** + * rio_register_scan - enumeration/discovery method registration interface + * @mport_id: mport device ID for which fabric scan routine has to be set + * (RIO_MPORT_ANY = set for all available mports) + * @scan_ops: enumeration/discovery control structure + * + * Assigns enumeration or discovery method to the specified mport device (or all + * available mports if RIO_MPORT_ANY is specified). + * Returns error if the mport already has an enumerator attached to it. + * In case of RIO_MPORT_ANY ignores ports with valid scan routines and returns + * an error if was unable to find at least one available mport. + */ +int rio_register_scan(int mport_id, struct rio_scan *scan_ops) +{ + struct rio_mport *port; + int rc = -EBUSY; + + mutex_lock(&rio_mport_list_lock); + list_for_each_entry(port, &rio_mports, node) { + if (port->id == mport_id || mport_id == RIO_MPORT_ANY) { + if (port->nscan && mport_id == RIO_MPORT_ANY) + continue; + else if (port->nscan) + break; + + port->nscan = scan_ops; + rc = 0; + + if (mport_id != RIO_MPORT_ANY) + break; + } + } + mutex_unlock(&rio_mport_list_lock); + + return rc; +} +EXPORT_SYMBOL_GPL(rio_register_scan); + +/** + * rio_unregister_scan - removes enumeration/discovery method from mport + * @mport_id: mport device ID for which fabric scan routine has to be + * unregistered (RIO_MPORT_ANY = set for all available mports) + * + * Removes enumeration or discovery method assigned to the specified mport + * device (or all available mports if RIO_MPORT_ANY is specified). + */ +int rio_unregister_scan(int mport_id) +{ + struct rio_mport *port; + + mutex_lock(&rio_mport_list_lock); + list_for_each_entry(port, &rio_mports, node) { + if (port->id == mport_id || mport_id == RIO_MPORT_ANY) { + if (port->nscan) + port->nscan = NULL; + if (mport_id != RIO_MPORT_ANY) + break; + } + } + mutex_unlock(&rio_mport_list_lock); + + return 0; +} +EXPORT_SYMBOL_GPL(rio_unregister_scan); + static void rio_fixup_device(struct rio_dev *dev) { } @@ -1274,7 +1475,7 @@ static void disc_work_handler(struct work_struct *_work) work = container_of(_work, struct rio_disc_work, work); pr_debug("RIO: discovery work for mport %d %s\n", work->mport->id, work->mport->name); - rio_disc_mport(work->mport); + work->mport->nscan->discover(work->mport); } int rio_init_mports(void) @@ -1290,12 +1491,15 @@ int rio_init_mports(void) * First, run enumerations and check if we need to perform discovery * on any of the registered mports. */ + mutex_lock(&rio_mport_list_lock); list_for_each_entry(port, &rio_mports, node) { - if (port->host_deviceid >= 0) - rio_enum_mport(port); - else + if (port->host_deviceid >= 0) { + if (port->nscan) + port->nscan->enumerate(port); + } else n++; } + mutex_unlock(&rio_mport_list_lock); if (!n) goto no_disc; @@ -1322,14 +1526,16 @@ int rio_init_mports(void) } n = 0; + mutex_lock(&rio_mport_list_lock); list_for_each_entry(port, &rio_mports, node) { - if (port->host_deviceid < 0) { + if (port->host_deviceid < 0 && port->nscan) { work[n].mport = port; INIT_WORK(&work[n].work, disc_work_handler); queue_work(rio_wq, &work[n].work); n++; } } + mutex_unlock(&rio_mport_list_lock); flush_workqueue(rio_wq); pr_debug("RIO: destroy discovery workqueue\n"); @@ -1342,8 +1548,6 @@ no_disc: return 0; } -device_initcall_sync(rio_init_mports); - static int hdids[RIO_MAX_MPORTS + 1]; static int rio_get_hdid(int index) @@ -1371,7 +1575,10 @@ int rio_register_mport(struct rio_mport *port) port->id = next_portid++; port->host_deviceid = rio_get_hdid(port->id); + port->nscan = NULL; + mutex_lock(&rio_mport_list_lock); list_add_tail(&port->node, &rio_mports); + mutex_unlock(&rio_mport_list_lock); return 0; } @@ -1386,3 +1593,4 @@ EXPORT_SYMBOL_GPL(rio_request_inb_mbox); EXPORT_SYMBOL_GPL(rio_release_inb_mbox); EXPORT_SYMBOL_GPL(rio_request_outb_mbox); EXPORT_SYMBOL_GPL(rio_release_outb_mbox); +EXPORT_SYMBOL_GPL(rio_init_mports); diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h index b1af414f15e6..0afdf482517e 100644 --- a/drivers/rapidio/rio.h +++ b/drivers/rapidio/rio.h @@ -15,6 +15,7 @@ #include #define RIO_MAX_CHK_RETRY 3 +#define RIO_MPORT_ANY (-1) /* Functions internal to the RIO core code */ @@ -27,8 +28,6 @@ extern u32 rio_mport_get_efb(struct rio_mport *port, int local, u16 destid, extern int rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid, u8 hopcount); extern int rio_create_sysfs_dev_files(struct rio_dev *rdev); -extern int rio_enum_mport(struct rio_mport *mport); -extern int rio_disc_mport(struct rio_mport *mport); extern int rio_std_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount, u16 table, u16 route_destid, u8 route_port); @@ -39,10 +38,16 @@ extern int rio_std_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount, u16 table); extern int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock); extern struct rio_dev *rio_get_comptag(u32 comp_tag, struct rio_dev *from); +extern int rio_add_device(struct rio_dev *rdev); +extern void rio_switch_init(struct rio_dev *rdev, int do_enum); +extern int rio_enable_rx_tx_port(struct rio_mport *port, int local, u16 destid, + u8 hopcount, u8 port_num); +extern int rio_register_scan(int mport_id, struct rio_scan *scan_ops); +extern int rio_unregister_scan(int mport_id); +extern void rio_attach_device(struct rio_dev *rdev); /* Structures internal to the RIO core code */ extern struct device_attribute rio_dev_attrs[]; -extern spinlock_t rio_global_list_lock; extern struct rio_switch_ops __start_rio_switch_ops[]; extern struct rio_switch_ops __end_rio_switch_ops[]; diff --git a/include/linux/rio.h b/include/linux/rio.h index a3e784278667..cd3796ee7410 100644 --- a/include/linux/rio.h +++ b/include/linux/rio.h @@ -83,7 +83,6 @@ extern struct bus_type rio_bus_type; extern struct device rio_bus; -extern struct list_head rio_devices; /* list of all devices */ struct rio_mport; struct rio_dev; @@ -237,6 +236,7 @@ enum rio_phy_type { * @name: Port name string * @priv: Master port private data * @dma: DMA device associated with mport + * @nscan: RapidIO network enumeration/discovery operations */ struct rio_mport { struct list_head dbells; /* list of doorbell events */ @@ -262,6 +262,7 @@ struct rio_mport { #ifdef CONFIG_RAPIDIO_DMA_ENGINE struct dma_device dma; #endif + struct rio_scan *nscan; }; struct rio_id_table { @@ -460,6 +461,16 @@ static inline struct rio_mport *dma_to_mport(struct dma_device *ddev) } #endif /* CONFIG_RAPIDIO_DMA_ENGINE */ +/** + * struct rio_scan - RIO enumeration and discovery operations + * @enumerate: Callback to perform RapidIO fabric enumeration. + * @discover: Callback to perform RapidIO fabric discovery. + */ +struct rio_scan { + int (*enumerate)(struct rio_mport *mport); + int (*discover)(struct rio_mport *mport); +}; + /* Architecture and hardware-specific functions */ extern int rio_register_mport(struct rio_mport *); extern int rio_open_inb_mbox(struct rio_mport *, void *, int, int); diff --git a/include/linux/rio_drv.h b/include/linux/rio_drv.h index b75c05920ab5..5059994fe297 100644 --- a/include/linux/rio_drv.h +++ b/include/linux/rio_drv.h @@ -433,5 +433,6 @@ extern u16 rio_local_get_device_id(struct rio_mport *port); extern struct rio_dev *rio_get_device(u16 vid, u16 did, struct rio_dev *from); extern struct rio_dev *rio_get_asm(u16 vid, u16 did, u16 asm_vid, u16 asm_did, struct rio_dev *from); +extern int rio_init_mports(void); #endif /* LINUX_RIO_DRV_H */ -- cgit v1.2.3 From bc8fcfea18249640f2728c46d70999dcb7e4dc49 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Fri, 24 May 2013 15:55:06 -0700 Subject: rapidio: add enumeration/discovery start from user space Add RapidIO enumeration/discovery start from user space. User space start allows to defer RapidIO fabric scan until the moment when all participating endpoints are initialized avoiding mandatory synchronized start of all endpoints (which may be challenging in systems with large number of RapidIO endpoints). Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Li Yang Cc: Kumar Gala Cc: Andre van Herk Cc: Micha Nelissen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rapidio/rio-driver.c | 1 + drivers/rapidio/rio-scan.c | 24 ++++++++++++++++++++--- drivers/rapidio/rio-sysfs.c | 45 ++++++++++++++++++++++++++++++++++++++++++++ drivers/rapidio/rio.c | 28 +++++++++++++++++++++++++-- drivers/rapidio/rio.h | 2 ++ include/linux/rio.h | 9 +++++++-- 6 files changed, 102 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/drivers/rapidio/rio-driver.c b/drivers/rapidio/rio-driver.c index 55850bb21480..a0c875563d76 100644 --- a/drivers/rapidio/rio-driver.c +++ b/drivers/rapidio/rio-driver.c @@ -207,6 +207,7 @@ struct bus_type rio_bus_type = { .name = "rapidio", .match = rio_match_bus, .dev_attrs = rio_dev_attrs, + .bus_attrs = rio_bus_attrs, .probe = rio_device_probe, .remove = rio_device_remove, }; diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c index 7bdc67419cc3..4c15dbf81087 100644 --- a/drivers/rapidio/rio-scan.c +++ b/drivers/rapidio/rio-scan.c @@ -1134,19 +1134,30 @@ static void rio_pw_enable(struct rio_mport *port, int enable) /** * rio_enum_mport- Start enumeration through a master port * @mport: Master port to send transactions + * @flags: Enumeration control flags * * Starts the enumeration process. If somebody has enumerated our * master port device, then give up. If not and we have an active * link, then start recursive peer enumeration. Returns %0 if * enumeration succeeds or %-EBUSY if enumeration fails. */ -int rio_enum_mport(struct rio_mport *mport) +int rio_enum_mport(struct rio_mport *mport, u32 flags) { struct rio_net *net = NULL; int rc = 0; printk(KERN_INFO "RIO: enumerate master port %d, %s\n", mport->id, mport->name); + + /* + * To avoid multiple start requests (repeat enumeration is not supported + * by this method) check if enumeration/discovery was performed for this + * mport: if mport was added into the list of mports for a net exit + * with error. + */ + if (mport->nnode.next || mport->nnode.prev) + return -EBUSY; + /* If somebody else enumerated our master port device, bail. */ if (rio_enum_host(mport) < 0) { printk(KERN_INFO @@ -1236,14 +1247,16 @@ static void rio_build_route_tables(struct rio_net *net) /** * rio_disc_mport- Start discovery through a master port * @mport: Master port to send transactions + * @flags: discovery control flags * * Starts the discovery process. If we have an active link, - * then wait for the signal that enumeration is complete. + * then wait for the signal that enumeration is complete (if wait + * is allowed). * When enumeration completion is signaled, start recursive * peer discovery. Returns %0 if discovery succeeds or %-EBUSY * on failure. */ -int rio_disc_mport(struct rio_mport *mport) +int rio_disc_mport(struct rio_mport *mport, u32 flags) { struct rio_net *net = NULL; unsigned long to_end; @@ -1253,6 +1266,11 @@ int rio_disc_mport(struct rio_mport *mport) /* If master port has an active link, allocate net and discover peers */ if (rio_mport_is_active(mport)) { + if (rio_enum_complete(mport)) + goto enum_done; + else if (flags & RIO_SCAN_ENUM_NO_WAIT) + return -EAGAIN; + pr_debug("RIO: wait for enumeration to complete...\n"); to_end = jiffies + CONFIG_RAPIDIO_DISC_TIMEOUT * HZ; diff --git a/drivers/rapidio/rio-sysfs.c b/drivers/rapidio/rio-sysfs.c index 4dbe360989be..66d4acd5e18f 100644 --- a/drivers/rapidio/rio-sysfs.c +++ b/drivers/rapidio/rio-sysfs.c @@ -285,3 +285,48 @@ void rio_remove_sysfs_dev_files(struct rio_dev *rdev) rdev->rswitch->sw_sysfs(rdev, RIO_SW_SYSFS_REMOVE); } } + +static ssize_t bus_scan_store(struct bus_type *bus, const char *buf, + size_t count) +{ + long val; + struct rio_mport *port = NULL; + int rc; + + if (kstrtol(buf, 0, &val) < 0) + return -EINVAL; + + if (val == RIO_MPORT_ANY) { + rc = rio_init_mports(); + goto exit; + } + + if (val < 0 || val >= RIO_MAX_MPORTS) + return -EINVAL; + + port = rio_find_mport((int)val); + + if (!port) { + pr_debug("RIO: %s: mport_%d not available\n", + __func__, (int)val); + return -EINVAL; + } + + if (!port->nscan) + return -EINVAL; + + if (port->host_deviceid >= 0) + rc = port->nscan->enumerate(port, 0); + else + rc = port->nscan->discover(port, RIO_SCAN_ENUM_NO_WAIT); +exit: + if (!rc) + rc = count; + + return rc; +} + +struct bus_attribute rio_bus_attrs[] = { + __ATTR(scan, (S_IWUSR|S_IWGRP), NULL, bus_scan_store), + __ATTR_NULL +}; diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c index 6e75dda34799..cb1c08996fbb 100644 --- a/drivers/rapidio/rio.c +++ b/drivers/rapidio/rio.c @@ -1382,6 +1382,30 @@ EXPORT_SYMBOL_GPL(rio_dma_prep_slave_sg); #endif /* CONFIG_RAPIDIO_DMA_ENGINE */ +/** + * rio_find_mport - find RIO mport by its ID + * @mport_id: number (ID) of mport device + * + * Given a RIO mport number, the desired mport is located + * in the global list of mports. If the mport is found, a pointer to its + * data structure is returned. If no mport is found, %NULL is returned. + */ +struct rio_mport *rio_find_mport(int mport_id) +{ + struct rio_mport *port; + + mutex_lock(&rio_mport_list_lock); + list_for_each_entry(port, &rio_mports, node) { + if (port->id == mport_id) + goto found; + } + port = NULL; +found: + mutex_unlock(&rio_mport_list_lock); + + return port; +} + /** * rio_register_scan - enumeration/discovery method registration interface * @mport_id: mport device ID for which fabric scan routine has to be set @@ -1475,7 +1499,7 @@ static void disc_work_handler(struct work_struct *_work) work = container_of(_work, struct rio_disc_work, work); pr_debug("RIO: discovery work for mport %d %s\n", work->mport->id, work->mport->name); - work->mport->nscan->discover(work->mport); + work->mport->nscan->discover(work->mport, 0); } int rio_init_mports(void) @@ -1495,7 +1519,7 @@ int rio_init_mports(void) list_for_each_entry(port, &rio_mports, node) { if (port->host_deviceid >= 0) { if (port->nscan) - port->nscan->enumerate(port); + port->nscan->enumerate(port, 0); } else n++; } diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h index 0afdf482517e..c14f864dea5c 100644 --- a/drivers/rapidio/rio.h +++ b/drivers/rapidio/rio.h @@ -45,9 +45,11 @@ extern int rio_enable_rx_tx_port(struct rio_mport *port, int local, u16 destid, extern int rio_register_scan(int mport_id, struct rio_scan *scan_ops); extern int rio_unregister_scan(int mport_id); extern void rio_attach_device(struct rio_dev *rdev); +extern struct rio_mport *rio_find_mport(int mport_id); /* Structures internal to the RIO core code */ extern struct device_attribute rio_dev_attrs[]; +extern struct bus_attribute rio_bus_attrs[]; extern struct rio_switch_ops __start_rio_switch_ops[]; extern struct rio_switch_ops __end_rio_switch_ops[]; diff --git a/include/linux/rio.h b/include/linux/rio.h index cd3796ee7410..18e099342e6f 100644 --- a/include/linux/rio.h +++ b/include/linux/rio.h @@ -265,6 +265,11 @@ struct rio_mport { struct rio_scan *nscan; }; +/* + * Enumeration/discovery control flags + */ +#define RIO_SCAN_ENUM_NO_WAIT 0x00000001 /* Do not wait for enum completed */ + struct rio_id_table { u16 start; /* logical minimal id */ u32 max; /* max number of IDs in table */ @@ -467,8 +472,8 @@ static inline struct rio_mport *dma_to_mport(struct dma_device *ddev) * @discover: Callback to perform RapidIO fabric discovery. */ struct rio_scan { - int (*enumerate)(struct rio_mport *mport); - int (*discover)(struct rio_mport *mport); + int (*enumerate)(struct rio_mport *mport, u32 flags); + int (*discover)(struct rio_mport *mport, u32 flags); }; /* Architecture and hardware-specific functions */ -- cgit v1.2.3 From 4c663cfc523a88d97a8309b04a089c27dc57fd7e Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Fri, 24 May 2013 15:55:09 -0700 Subject: wait: fix false timeouts when using wait_event_timeout() Many callers of the wait_event_timeout() and wait_event_interruptible_timeout() expect that the return value will be positive if the specified condition becomes true before the timeout elapses. However, at the moment this isn't guaranteed. If the wake-up handler is delayed enough, the time remaining until timeout will be calculated as 0 - and passed back as a return value - even if the condition became true before the timeout has passed. Fix this by returning at least 1 if the condition becomes true. This semantic is in line with what wait_for_condition_timeout() does; see commit bb10ed09 ("sched: fix wait_for_completion_timeout() spurious failure under heavy load"). Daniel said "We have 3 instances of this bug in drm/i915. One case even where we switch between the interruptible and not interruptible wait_event_timeout variants, foolishly presuming they have the same semantics. I very much like this." One such bug is reported at https://bugs.freedesktop.org/show_bug.cgi?id=64133 Signed-off-by: Imre Deak Acked-by: Daniel Vetter Acked-by: David Howells Acked-by: Jens Axboe Cc: "Paul E. McKenney" Cc: Dave Jones Cc: Lukas Czerner Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/wait.h | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/linux/wait.h b/include/linux/wait.h index ac38be2692d8..1133695eb067 100644 --- a/include/linux/wait.h +++ b/include/linux/wait.h @@ -217,6 +217,8 @@ do { \ if (!ret) \ break; \ } \ + if (!ret && (condition)) \ + ret = 1; \ finish_wait(&wq, &__wait); \ } while (0) @@ -233,8 +235,9 @@ do { \ * wake_up() has to be called after changing any variable that could * change the result of the wait condition. * - * The function returns 0 if the @timeout elapsed, and the remaining - * jiffies if the condition evaluated to true before the timeout elapsed. + * The function returns 0 if the @timeout elapsed, or the remaining + * jiffies (at least 1) if the @condition evaluated to %true before + * the @timeout elapsed. */ #define wait_event_timeout(wq, condition, timeout) \ ({ \ @@ -302,6 +305,8 @@ do { \ ret = -ERESTARTSYS; \ break; \ } \ + if (!ret && (condition)) \ + ret = 1; \ finish_wait(&wq, &__wait); \ } while (0) @@ -318,9 +323,10 @@ do { \ * wake_up() has to be called after changing any variable that could * change the result of the wait condition. * - * The function returns 0 if the @timeout elapsed, -ERESTARTSYS if it - * was interrupted by a signal, and the remaining jiffies otherwise - * if the condition evaluated to true before the timeout elapsed. + * Returns: + * 0 if the @timeout elapsed, -%ERESTARTSYS if it was interrupted by + * a signal, or the remaining jiffies (at least 1) if the @condition + * evaluated to %true before the @timeout elapsed. */ #define wait_event_interruptible_timeout(wq, condition, timeout) \ ({ \ -- cgit v1.2.3 From 7450231fb35492951e78a91b833fd935171f4e66 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 24 May 2013 15:55:20 -0700 Subject: linux/kernel.h: fix kernel-doc warning Fix kernel-doc warning in : Warning(include/linux/kernel.h:590): No description found for parameter 'ip' scripts/kernel-doc cannot handle macros, functions, or function prototypes between the function or macro that is being documented and its definition, so move these prototypes above the function that is being documented. Signed-off-by: Randy Dunlap Cc: Steven Rostedt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kernel.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index e96329ceb28c..e9ef6d6b51d5 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -562,6 +562,9 @@ int __trace_bprintk(unsigned long ip, const char *fmt, ...); extern __printf(2, 3) int __trace_printk(unsigned long ip, const char *fmt, ...); +extern int __trace_bputs(unsigned long ip, const char *str); +extern int __trace_puts(unsigned long ip, const char *str, int size); + /** * trace_puts - write a string into the ftrace buffer * @str: the string to record @@ -587,8 +590,6 @@ int __trace_printk(unsigned long ip, const char *fmt, ...); * (1 when __trace_bputs is used, strlen(str) when __trace_puts is used) */ -extern int __trace_bputs(unsigned long ip, const char *str); -extern int __trace_puts(unsigned long ip, const char *str, int size); #define trace_puts(str) ({ \ static const char *trace_printk_fmt \ __attribute__((section("__trace_printk_fmt"))) = \ -- cgit v1.2.3 From 12bcbe66d7b3cc9f9f86cd02f925666eaa3c2107 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Tue, 28 May 2013 14:38:42 -0400 Subject: rcu: Add _notrace variation of rcu_dereference_raw() and hlist_for_each_entry_rcu() As rcu_dereference_raw() under RCU debug config options can add quite a bit of checks, and that tracing uses rcu_dereference_raw(), these checks happen with the function tracer. The function tracer also happens to trace these debug checks too. This added overhead can livelock the system. Add a new interface to RCU for both rcu_dereference_raw_notrace() as well as hlist_for_each_entry_rcu_notrace() as the hlist iterator uses the rcu_dereference_raw() as well, and is used a bit with the function tracer. Link: http://lkml.kernel.org/r/20130528184209.304356745@goodmis.org Acked-by: Paul E. McKenney Signed-off-by: Steven Rostedt --- include/linux/rculist.h | 20 ++++++++++++++++++++ include/linux/rcupdate.h | 9 +++++++++ 2 files changed, 29 insertions(+) (limited to 'include') diff --git a/include/linux/rculist.h b/include/linux/rculist.h index 8089e35d47ac..f4b1001a4676 100644 --- a/include/linux/rculist.h +++ b/include/linux/rculist.h @@ -460,6 +460,26 @@ static inline void hlist_add_after_rcu(struct hlist_node *prev, pos = hlist_entry_safe(rcu_dereference_raw(hlist_next_rcu(\ &(pos)->member)), typeof(*(pos)), member)) +/** + * hlist_for_each_entry_rcu_notrace - iterate over rcu list of given type (for tracing) + * @pos: the type * to use as a loop cursor. + * @head: the head for your list. + * @member: the name of the hlist_node within the struct. + * + * This list-traversal primitive may safely run concurrently with + * the _rcu list-mutation primitives such as hlist_add_head_rcu() + * as long as the traversal is guarded by rcu_read_lock(). + * + * This is the same as hlist_for_each_entry_rcu() except that it does + * not do any RCU debugging or tracing. + */ +#define hlist_for_each_entry_rcu_notrace(pos, head, member) \ + for (pos = hlist_entry_safe (rcu_dereference_raw_notrace(hlist_first_rcu(head)),\ + typeof(*(pos)), member); \ + pos; \ + pos = hlist_entry_safe(rcu_dereference_raw_notrace(hlist_next_rcu(\ + &(pos)->member)), typeof(*(pos)), member)) + /** * hlist_for_each_entry_rcu_bh - iterate over rcu list of given type * @pos: the type * to use as a loop cursor. diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 4ccd68e49b00..ddcc7826d907 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -640,6 +640,15 @@ static inline void rcu_preempt_sleep_check(void) #define rcu_dereference_raw(p) rcu_dereference_check(p, 1) /*@@@ needed? @@@*/ +/* + * The tracing infrastructure traces RCU (we want that), but unfortunately + * some of the RCU checks causes tracing to lock up the system. + * + * The tracing version of rcu_dereference_raw() must not call + * rcu_read_lock_held(). + */ +#define rcu_dereference_raw_notrace(p) __rcu_dereference_check((p), 1, __rcu) + /** * rcu_access_index() - fetch RCU index with no dereferencing * @p: The index to read -- cgit v1.2.3 From 2abb274629614bef4044a0b98ada42e977feadfd Mon Sep 17 00:00:00 2001 From: Aurelien Chartier Date: Tue, 28 May 2013 18:09:56 +0100 Subject: xenbus: delay xenbus frontend resume if xenstored is not running If the xenbus frontend is located in a domain running xenstored, the device resume is hanging because it is happening before the process resume. This patch adds extra logic to the resume code to check if we are the domain running xenstored and delay the resume if needed. Signed-off-by: Aurelien Chartier [Changes in v2: - Instead of bypassing the resume, process it in a workqueue] [Changes in v3: - Add a struct work in xenbus_device to avoid dynamic allocation - Several small code fixes] [Changes in v4: - Use a dedicated workqueue] [Changes in v5: - Move create_workqueue error handling to xenbus_frontend_dev_resume] Acked-by: Jan Beulich Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/xenbus/xenbus_probe_frontend.c | 37 +++++++++++++++++++++++++++++- include/xen/xenbus.h | 1 + 2 files changed, 37 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/drivers/xen/xenbus/xenbus_probe_frontend.c b/drivers/xen/xenbus/xenbus_probe_frontend.c index 3159a37d966d..a7e25073de19 100644 --- a/drivers/xen/xenbus/xenbus_probe_frontend.c +++ b/drivers/xen/xenbus/xenbus_probe_frontend.c @@ -29,6 +29,8 @@ #include "xenbus_probe.h" +static struct workqueue_struct *xenbus_frontend_wq; + /* device// => - */ static int frontend_bus_id(char bus_id[XEN_BUS_ID_SIZE], const char *nodename) { @@ -89,9 +91,40 @@ static void backend_changed(struct xenbus_watch *watch, xenbus_otherend_changed(watch, vec, len, 1); } +static void xenbus_frontend_delayed_resume(struct work_struct *w) +{ + struct xenbus_device *xdev = container_of(w, struct xenbus_device, work); + + xenbus_dev_resume(&xdev->dev); +} + +static int xenbus_frontend_dev_resume(struct device *dev) +{ + /* + * If xenstored is running in this domain, we cannot access the backend + * state at the moment, so we need to defer xenbus_dev_resume + */ + if (xen_store_domain_type == XS_LOCAL) { + struct xenbus_device *xdev = to_xenbus_device(dev); + + if (!xenbus_frontend_wq) { + pr_err("%s: no workqueue to process delayed resume\n", + xdev->nodename); + return -EFAULT; + } + + INIT_WORK(&xdev->work, xenbus_frontend_delayed_resume); + queue_work(xenbus_frontend_wq, &xdev->work); + + return 0; + } + + return xenbus_dev_resume(dev); +} + static const struct dev_pm_ops xenbus_pm_ops = { .suspend = xenbus_dev_suspend, - .resume = xenbus_dev_resume, + .resume = xenbus_frontend_dev_resume, .freeze = xenbus_dev_suspend, .thaw = xenbus_dev_cancel, .restore = xenbus_dev_resume, @@ -440,6 +473,8 @@ static int __init xenbus_probe_frontend_init(void) register_xenstore_notifier(&xenstore_notifier); + xenbus_frontend_wq = create_workqueue("xenbus_frontend"); + return 0; } subsys_initcall(xenbus_probe_frontend_init); diff --git a/include/xen/xenbus.h b/include/xen/xenbus.h index 0a7515c1e3a4..569c07f2e344 100644 --- a/include/xen/xenbus.h +++ b/include/xen/xenbus.h @@ -70,6 +70,7 @@ struct xenbus_device { struct device dev; enum xenbus_state state; struct completion down; + struct work_struct work; }; static inline struct xenbus_device *to_xenbus_device(struct device *dev) -- cgit v1.2.3 From 9b31a328e344e62e7cc98ae574edcb7b674719bb Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 15 May 2013 00:52:44 -0700 Subject: target: Re-instate sess_wait_list for target_wait_for_sess_cmds Switch back to pre commit 1c7b13fe652 list splicing logic for active I/O shutdown with tcm_qla2xxx + ib_srpt fabrics. The original commit was done under the incorrect assumption that it's safe to walk se_sess->sess_cmd_list unprotected in target_wait_for_sess_cmds() after sess->sess_tearing_down = 1 has been set by target_sess_cmd_list_set_waiting() during session shutdown. So instead of adding sess->sess_cmd_lock protection around sess->sess_cmd_list during target_wait_for_sess_cmds(), switch back to sess->sess_wait_list to allow wait_for_completion() + TFO->release_cmd() to occur without having to walk ->sess_cmd_list after the list_splice. Also add a check to exit if target_sess_cmd_list_set_waiting() has already been called, and add a WARN_ON to check for any fabric bug where new se_cmds are added to sess->sess_cmd_list after sess->sess_tearing_down = 1 has already been set. Cc: Joern Engel Cc: Roland Dreier Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 18 ++++++++++++++---- include/target/target_core_base.h | 1 + 2 files changed, 15 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 311c11349aab..bbca144821c5 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -221,6 +221,7 @@ struct se_session *transport_init_session(void) INIT_LIST_HEAD(&se_sess->sess_list); INIT_LIST_HEAD(&se_sess->sess_acl_list); INIT_LIST_HEAD(&se_sess->sess_cmd_list); + INIT_LIST_HEAD(&se_sess->sess_wait_list); spin_lock_init(&se_sess->sess_cmd_lock); kref_init(&se_sess->sess_kref); @@ -2250,11 +2251,14 @@ void target_sess_cmd_list_set_waiting(struct se_session *se_sess) unsigned long flags; spin_lock_irqsave(&se_sess->sess_cmd_lock, flags); - - WARN_ON(se_sess->sess_tearing_down); + if (se_sess->sess_tearing_down) { + spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags); + return; + } se_sess->sess_tearing_down = 1; + list_splice_init(&se_sess->sess_cmd_list, &se_sess->sess_wait_list); - list_for_each_entry(se_cmd, &se_sess->sess_cmd_list, se_cmd_list) + list_for_each_entry(se_cmd, &se_sess->sess_wait_list, se_cmd_list) se_cmd->cmd_wait_set = 1; spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags); @@ -2267,9 +2271,10 @@ EXPORT_SYMBOL(target_sess_cmd_list_set_waiting); void target_wait_for_sess_cmds(struct se_session *se_sess) { struct se_cmd *se_cmd, *tmp_cmd; + unsigned long flags; list_for_each_entry_safe(se_cmd, tmp_cmd, - &se_sess->sess_cmd_list, se_cmd_list) { + &se_sess->sess_wait_list, se_cmd_list) { list_del(&se_cmd->se_cmd_list); pr_debug("Waiting for se_cmd: %p t_state: %d, fabric state:" @@ -2283,6 +2288,11 @@ void target_wait_for_sess_cmds(struct se_session *se_sess) se_cmd->se_tfo->release_cmd(se_cmd); } + + spin_lock_irqsave(&se_sess->sess_cmd_lock, flags); + WARN_ON(!list_empty(&se_sess->sess_cmd_list)); + spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags); + } EXPORT_SYMBOL(target_wait_for_sess_cmds); diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index e773dfa5f98f..4ea4f985f394 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -543,6 +543,7 @@ struct se_session { struct list_head sess_list; struct list_head sess_acl_list; struct list_head sess_cmd_list; + struct list_head sess_wait_list; spinlock_t sess_cmd_lock; struct kref sess_kref; }; -- cgit v1.2.3 From ac4e97abce9b80c020e7113325f49e58b7b15e3f Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 30 May 2013 09:19:35 +0200 Subject: scatterlist: sg_set_buf() argument must be in linear mapping Add a check behind CONFIG_DEBUG_SG to verify this. Signed-off-by: Rusty Russell Signed-off-by: Jens Axboe --- include/linux/scatterlist.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h index 5951e3f38878..26806775b11b 100644 --- a/include/linux/scatterlist.h +++ b/include/linux/scatterlist.h @@ -111,6 +111,9 @@ static inline struct page *sg_page(struct scatterlist *sg) static inline void sg_set_buf(struct scatterlist *sg, const void *buf, unsigned int buflen) { +#ifdef CONFIG_DEBUG_SG + BUG_ON(!virt_addr_valid(buf)); +#endif sg_set_page(sg, virt_to_page(buf), buflen, offset_in_page(buf)); } -- cgit v1.2.3 From 37448adfc7ce0d6d5892b87aa8d57edde4126f49 Mon Sep 17 00:00:00 2001 From: Lance Ortiz Date: Thu, 30 May 2013 08:25:12 -0600 Subject: aerdrv: Move cper_print_aer() call out of interrupt context The following warning was seen on 3.9 when a corrected PCIe error was being handled by the AER subsystem. WARNING: at .../drivers/pci/search.c:214 pci_get_dev_by_id+0x8a/0x90() This occurred because a call to pci_get_domain_bus_and_slot() was added to cper_print_pcie() to setup for the call to cper_print_aer(). The warning showed up because cper_print_pcie() is called in an interrupt context and pci_get* functions are not supposed to be called in that context. The solution is to move the cper_print_aer() call out of the interrupt context and into aer_recover_work_func() to avoid any warnings when calling pci_get* functions. Signed-off-by: Lance Ortiz Acked-by: Borislav Petkov Acked-by: Rafael J. Wysocki Signed-off-by: Tony Luck --- drivers/acpi/apei/cper.c | 18 ------------------ drivers/acpi/apei/ghes.c | 4 +++- drivers/pci/pcie/aer/aerdrv_core.c | 5 ++++- drivers/pci/pcie/aer/aerdrv_errprint.c | 4 ++-- include/linux/aer.h | 5 +++-- 5 files changed, 12 insertions(+), 24 deletions(-) (limited to 'include') diff --git a/drivers/acpi/apei/cper.c b/drivers/acpi/apei/cper.c index fefc2ca7cc3e..33dc6a004802 100644 --- a/drivers/acpi/apei/cper.c +++ b/drivers/acpi/apei/cper.c @@ -250,10 +250,6 @@ static const char *cper_pcie_port_type_strs[] = { static void cper_print_pcie(const char *pfx, const struct cper_sec_pcie *pcie, const struct acpi_hest_generic_data *gdata) { -#ifdef CONFIG_ACPI_APEI_PCIEAER - struct pci_dev *dev; -#endif - if (pcie->validation_bits & CPER_PCIE_VALID_PORT_TYPE) printk("%s""port_type: %d, %s\n", pfx, pcie->port_type, pcie->port_type < ARRAY_SIZE(cper_pcie_port_type_strs) ? @@ -285,20 +281,6 @@ static void cper_print_pcie(const char *pfx, const struct cper_sec_pcie *pcie, printk( "%s""bridge: secondary_status: 0x%04x, control: 0x%04x\n", pfx, pcie->bridge.secondary_status, pcie->bridge.control); -#ifdef CONFIG_ACPI_APEI_PCIEAER - dev = pci_get_domain_bus_and_slot(pcie->device_id.segment, - pcie->device_id.bus, pcie->device_id.function); - if (!dev) { - pr_err("PCI AER Cannot get PCI device %04x:%02x:%02x.%d\n", - pcie->device_id.segment, pcie->device_id.bus, - pcie->device_id.slot, pcie->device_id.function); - return; - } - if (pcie->validation_bits & CPER_PCIE_VALID_AER_INFO) - cper_print_aer(pfx, dev, gdata->error_severity, - (struct aer_capability_regs *) pcie->aer_info); - pci_dev_put(dev); -#endif } static const char *apei_estatus_section_flag_strs[] = { diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c index d668a8ae602b..403baf4dffc1 100644 --- a/drivers/acpi/apei/ghes.c +++ b/drivers/acpi/apei/ghes.c @@ -454,7 +454,9 @@ static void ghes_do_proc(struct ghes *ghes, aer_severity = cper_severity_to_aer(sev); aer_recover_queue(pcie_err->device_id.segment, pcie_err->device_id.bus, - devfn, aer_severity); + devfn, aer_severity, + (struct aer_capability_regs *) + pcie_err->aer_info); } } diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index 8ec8b4f48560..0f4554e48cc5 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -580,6 +580,7 @@ struct aer_recover_entry u8 devfn; u16 domain; int severity; + struct aer_capability_regs *regs; }; static DEFINE_KFIFO(aer_recover_ring, struct aer_recover_entry, @@ -593,7 +594,7 @@ static DEFINE_SPINLOCK(aer_recover_ring_lock); static DECLARE_WORK(aer_recover_work, aer_recover_work_func); void aer_recover_queue(int domain, unsigned int bus, unsigned int devfn, - int severity) + int severity, struct aer_capability_regs *aer_regs) { unsigned long flags; struct aer_recover_entry entry = { @@ -601,6 +602,7 @@ void aer_recover_queue(int domain, unsigned int bus, unsigned int devfn, .devfn = devfn, .domain = domain, .severity = severity, + .regs = aer_regs, }; spin_lock_irqsave(&aer_recover_ring_lock, flags); @@ -627,6 +629,7 @@ static void aer_recover_work_func(struct work_struct *work) PCI_SLOT(entry.devfn), PCI_FUNC(entry.devfn)); continue; } + cper_print_aer(pdev, entry.severity, entry.regs); do_recovery(pdev, entry.severity); pci_dev_put(pdev); } diff --git a/drivers/pci/pcie/aer/aerdrv_errprint.c b/drivers/pci/pcie/aer/aerdrv_errprint.c index 5ab14251839d..2c7c9f5f592c 100644 --- a/drivers/pci/pcie/aer/aerdrv_errprint.c +++ b/drivers/pci/pcie/aer/aerdrv_errprint.c @@ -220,7 +220,7 @@ int cper_severity_to_aer(int cper_severity) } EXPORT_SYMBOL_GPL(cper_severity_to_aer); -void cper_print_aer(const char *prefix, struct pci_dev *dev, int cper_severity, +void cper_print_aer(struct pci_dev *dev, int cper_severity, struct aer_capability_regs *aer) { int aer_severity, layer, agent, status_strs_size, tlp_header_valid = 0; @@ -244,7 +244,7 @@ void cper_print_aer(const char *prefix, struct pci_dev *dev, int cper_severity, agent = AER_GET_AGENT(aer_severity, status); dev_err(&dev->dev, "aer_status: 0x%08x, aer_mask: 0x%08x\n", status, mask); - cper_print_bits(prefix, status, status_strs, status_strs_size); + cper_print_bits("", status, status_strs, status_strs_size); dev_err(&dev->dev, "aer_layer=%s, aer_agent=%s\n", aer_error_layer[layer], aer_agent_string[agent]); if (aer_severity != AER_CORRECTABLE) diff --git a/include/linux/aer.h b/include/linux/aer.h index ec10e1b24c1c..737f90ab4b62 100644 --- a/include/linux/aer.h +++ b/include/linux/aer.h @@ -49,10 +49,11 @@ static inline int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev) } #endif -extern void cper_print_aer(const char *prefix, struct pci_dev *dev, +extern void cper_print_aer(struct pci_dev *dev, int cper_severity, struct aer_capability_regs *aer); extern int cper_severity_to_aer(int cper_severity); extern void aer_recover_queue(int domain, unsigned int bus, unsigned int devfn, - int severity); + int severity, + struct aer_capability_regs *aer_regs); #endif //_AER_H_ -- cgit v1.2.3 From d5ddad4168348337d98d6b8f156a3892de444411 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Fri, 31 May 2013 00:46:11 -0700 Subject: target: Propigate up ->cmd_kref put return via transport_generic_free_cmd Go ahead and propigate up the ->cmd_kref put return value from target_put_sess_cmd() -> transport_release_cmd() -> transport_put_cmd() -> transport_generic_free_cmd(). This is useful for certain fabrics when determining the active I/O shutdown case with SCF_ACK_KREF where a final target_put_sess_cmd() is still required by the caller. Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 28 +++++++++++++++------------- include/target/target_core_fabric.h | 2 +- 2 files changed, 16 insertions(+), 14 deletions(-) (limited to 'include') diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index bbca144821c5..21e315874a54 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -65,7 +65,7 @@ static void transport_complete_task_attr(struct se_cmd *cmd); static void transport_handle_queue_full(struct se_cmd *cmd, struct se_device *dev); static int transport_generic_get_mem(struct se_cmd *cmd); -static void transport_put_cmd(struct se_cmd *cmd); +static int transport_put_cmd(struct se_cmd *cmd); static void target_complete_ok_work(struct work_struct *work); int init_se_kmem_caches(void) @@ -1944,7 +1944,7 @@ static inline void transport_free_pages(struct se_cmd *cmd) * This routine unconditionally frees a command, and reference counting * or list removal must be done in the caller. */ -static void transport_release_cmd(struct se_cmd *cmd) +static int transport_release_cmd(struct se_cmd *cmd) { BUG_ON(!cmd->se_tfo); @@ -1956,11 +1956,11 @@ static void transport_release_cmd(struct se_cmd *cmd) * If this cmd has been setup with target_get_sess_cmd(), drop * the kref and call ->release_cmd() in kref callback. */ - if (cmd->check_release != 0) { - target_put_sess_cmd(cmd->se_sess, cmd); - return; - } + if (cmd->check_release != 0) + return target_put_sess_cmd(cmd->se_sess, cmd); + cmd->se_tfo->release_cmd(cmd); + return 1; } /** @@ -1969,7 +1969,7 @@ static void transport_release_cmd(struct se_cmd *cmd) * * This routine releases our reference to the command and frees it if possible. */ -static void transport_put_cmd(struct se_cmd *cmd) +static int transport_put_cmd(struct se_cmd *cmd) { unsigned long flags; @@ -1977,7 +1977,7 @@ static void transport_put_cmd(struct se_cmd *cmd) if (atomic_read(&cmd->t_fe_count) && !atomic_dec_and_test(&cmd->t_fe_count)) { spin_unlock_irqrestore(&cmd->t_state_lock, flags); - return; + return 0; } if (cmd->transport_state & CMD_T_DEV_ACTIVE) { @@ -1987,8 +1987,7 @@ static void transport_put_cmd(struct se_cmd *cmd) spin_unlock_irqrestore(&cmd->t_state_lock, flags); transport_free_pages(cmd); - transport_release_cmd(cmd); - return; + return transport_release_cmd(cmd); } void *transport_kmap_data_sg(struct se_cmd *cmd) @@ -2153,13 +2152,15 @@ static void transport_write_pending_qf(struct se_cmd *cmd) } } -void transport_generic_free_cmd(struct se_cmd *cmd, int wait_for_tasks) +int transport_generic_free_cmd(struct se_cmd *cmd, int wait_for_tasks) { + int ret = 0; + if (!(cmd->se_cmd_flags & SCF_SE_LUN_CMD)) { if (wait_for_tasks && (cmd->se_cmd_flags & SCF_SCSI_TMR_CDB)) transport_wait_for_tasks(cmd); - transport_release_cmd(cmd); + ret = transport_release_cmd(cmd); } else { if (wait_for_tasks) transport_wait_for_tasks(cmd); @@ -2167,8 +2168,9 @@ void transport_generic_free_cmd(struct se_cmd *cmd, int wait_for_tasks) if (cmd->se_lun) transport_lun_remove_cmd(cmd); - transport_put_cmd(cmd); + ret = transport_put_cmd(cmd); } + return ret; } EXPORT_SYMBOL(transport_generic_free_cmd); diff --git a/include/target/target_core_fabric.h b/include/target/target_core_fabric.h index 8a26f0d55fd1..1dcce9cc99b9 100644 --- a/include/target/target_core_fabric.h +++ b/include/target/target_core_fabric.h @@ -114,7 +114,7 @@ sense_reason_t transport_generic_new_cmd(struct se_cmd *); void target_execute_cmd(struct se_cmd *cmd); -void transport_generic_free_cmd(struct se_cmd *, int); +int transport_generic_free_cmd(struct se_cmd *, int); bool transport_wait_for_tasks(struct se_cmd *); int transport_check_aborted_status(struct se_cmd *, int); -- cgit v1.2.3 From 1e2bd517c108816220f262d7954b697af03b5f9c Mon Sep 17 00:00:00 2001 From: Pravin B Shelar Date: Thu, 30 May 2013 06:45:27 +0000 Subject: udp6: Fix udp fragmentation for tunnel traffic. udp6 over GRE tunnel does not work after to GRE tso changes. GRE tso handler passes inner packet but keeps track of outer header start in SKB_GSO_CB(skb)->mac_offset. udp6 fragment need to take care of outer header, which start at the mac_offset, while adding fragment header. This bug is introduced by commit 68c3316311 (GRE: Add TCP segmentation offload for GRE). Reported-by: Dmitry Kravkov Signed-off-by: Pravin B Shelar Tested-by: Dmitry Kravkov Signed-off-by: David S. Miller --- include/linux/skbuff.h | 15 +++++++++++++++ net/ipv6/udp_offload.c | 20 ++++++++++++-------- 2 files changed, 27 insertions(+), 8 deletions(-) (limited to 'include') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 2e0ced1af3b1..9c676eae3968 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -2852,6 +2852,21 @@ static inline int skb_tnl_header_len(const struct sk_buff *inner_skb) SKB_GSO_CB(inner_skb)->mac_offset; } +static inline int gso_pskb_expand_head(struct sk_buff *skb, int extra) +{ + int new_headroom, headroom; + int ret; + + headroom = skb_headroom(skb); + ret = pskb_expand_head(skb, extra, 0, GFP_ATOMIC); + if (ret) + return ret; + + new_headroom = skb_headroom(skb); + SKB_GSO_CB(skb)->mac_offset += (new_headroom - headroom); + return 0; +} + static inline bool skb_is_gso(const struct sk_buff *skb) { return skb_shinfo(skb)->gso_size; diff --git a/net/ipv6/udp_offload.c b/net/ipv6/udp_offload.c index 3bb3a891a424..d3cfaf9c7a08 100644 --- a/net/ipv6/udp_offload.c +++ b/net/ipv6/udp_offload.c @@ -46,11 +46,12 @@ static struct sk_buff *udp6_ufo_fragment(struct sk_buff *skb, unsigned int mss; unsigned int unfrag_ip6hlen, unfrag_len; struct frag_hdr *fptr; - u8 *mac_start, *prevhdr; + u8 *packet_start, *prevhdr; u8 nexthdr; u8 frag_hdr_sz = sizeof(struct frag_hdr); int offset; __wsum csum; + int tnl_hlen; mss = skb_shinfo(skb)->gso_size; if (unlikely(skb->len <= mss)) @@ -83,9 +84,11 @@ static struct sk_buff *udp6_ufo_fragment(struct sk_buff *skb, skb->ip_summed = CHECKSUM_NONE; /* Check if there is enough headroom to insert fragment header. */ - if ((skb_mac_header(skb) < skb->head + frag_hdr_sz) && - pskb_expand_head(skb, frag_hdr_sz, 0, GFP_ATOMIC)) - goto out; + tnl_hlen = skb_tnl_header_len(skb); + if (skb_headroom(skb) < (tnl_hlen + frag_hdr_sz)) { + if (gso_pskb_expand_head(skb, tnl_hlen + frag_hdr_sz)) + goto out; + } /* Find the unfragmentable header and shift it left by frag_hdr_sz * bytes to insert fragment header. @@ -93,11 +96,12 @@ static struct sk_buff *udp6_ufo_fragment(struct sk_buff *skb, unfrag_ip6hlen = ip6_find_1stfragopt(skb, &prevhdr); nexthdr = *prevhdr; *prevhdr = NEXTHDR_FRAGMENT; - unfrag_len = skb_network_header(skb) - skb_mac_header(skb) + - unfrag_ip6hlen; - mac_start = skb_mac_header(skb); - memmove(mac_start-frag_hdr_sz, mac_start, unfrag_len); + unfrag_len = (skb_network_header(skb) - skb_mac_header(skb)) + + unfrag_ip6hlen + tnl_hlen; + packet_start = (u8 *) skb->head + SKB_GSO_CB(skb)->mac_offset; + memmove(packet_start-frag_hdr_sz, packet_start, unfrag_len); + SKB_GSO_CB(skb)->mac_offset -= frag_hdr_sz; skb->mac_header -= frag_hdr_sz; skb->network_header -= frag_hdr_sz; -- cgit v1.2.3 From e4c1721642bbd42d8142f4811cde0588c28db51d Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Wed, 29 May 2013 07:36:25 +0000 Subject: xfrm: force a garbage collection after deleting a policy In some cases after deleting a policy from the SPD the policy would remain in the dst/flow/route cache for an extended period of time which caused problems for SELinux as its dynamic network access controls key off of the number of XFRM policy and state entries. This patch corrects this problem by forcing a XFRM garbage collection whenever a policy is sucessfully removed. Reported-by: Ondrej Moris Signed-off-by: Paul Moore Signed-off-by: David S. Miller --- include/net/xfrm.h | 5 +++++ net/key/af_key.c | 4 ++++ net/xfrm/xfrm_policy.c | 3 ++- net/xfrm/xfrm_user.c | 2 ++ 4 files changed, 13 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/xfrm.h b/include/net/xfrm.h index ae16531d0d35..94ce082b29dc 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -1160,6 +1160,8 @@ static inline void xfrm_sk_free_policy(struct sock *sk) } } +extern void xfrm_garbage_collect(struct net *net); + #else static inline void xfrm_sk_free_policy(struct sock *sk) {} @@ -1194,6 +1196,9 @@ static inline int xfrm6_policy_check_reverse(struct sock *sk, int dir, { return 1; } +static inline void xfrm_garbage_collect(struct net *net) +{ +} #endif static __inline__ diff --git a/net/key/af_key.c b/net/key/af_key.c index 5b1e5af25713..c5fbd7589681 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -2366,6 +2366,8 @@ static int pfkey_spddelete(struct sock *sk, struct sk_buff *skb, const struct sa out: xfrm_pol_put(xp); + if (err == 0) + xfrm_garbage_collect(net); return err; } @@ -2615,6 +2617,8 @@ static int pfkey_spdget(struct sock *sk, struct sk_buff *skb, const struct sadb_ out: xfrm_pol_put(xp); + if (delete && err == 0) + xfrm_garbage_collect(net); return err; } diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index 23cea0f74336..ea970b8002a2 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -2557,11 +2557,12 @@ static void __xfrm_garbage_collect(struct net *net) } } -static void xfrm_garbage_collect(struct net *net) +void xfrm_garbage_collect(struct net *net) { flow_cache_flush(); __xfrm_garbage_collect(net); } +EXPORT_SYMBOL(xfrm_garbage_collect); static void xfrm_garbage_collect_deferred(struct net *net) { diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index aa778748c565..3f565e495ac6 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -1681,6 +1681,8 @@ static int xfrm_get_policy(struct sk_buff *skb, struct nlmsghdr *nlh, out: xfrm_pol_put(xp); + if (delete && err == 0) + xfrm_garbage_collect(net); return err; } -- cgit v1.2.3 From 6d7581e62f8be462440d7b22c6361f7c9fa4902b Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Wed, 29 May 2013 05:02:56 +0000 Subject: list: introduce list_first_entry_or_null non-rcu variant of list_first_or_null_rcu Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- include/linux/list.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include') diff --git a/include/linux/list.h b/include/linux/list.h index 6a1f8df9144b..b83e5657365a 100644 --- a/include/linux/list.h +++ b/include/linux/list.h @@ -361,6 +361,17 @@ static inline void list_splice_tail_init(struct list_head *list, #define list_first_entry(ptr, type, member) \ list_entry((ptr)->next, type, member) +/** + * list_first_entry_or_null - get the first element from a list + * @ptr: the list head to take the element from. + * @type: the type of the struct this is embedded in. + * @member: the name of the list_struct within the struct. + * + * Note that if the list is empty, it returns NULL. + */ +#define list_first_entry_or_null(ptr, type, member) \ + (!list_empty(ptr) ? list_first_entry(ptr, type, member) : NULL) + /** * list_for_each - iterate over a list * @pos: the &struct list_head to use as a loop cursor. -- cgit v1.2.3 From c87a124a5d5e8cf8e21c4363c3372bcaf53ea190 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 29 May 2013 09:06:27 +0000 Subject: net: force a reload of first item in hlist_nulls_for_each_entry_rcu Roman Gushchin discovered that udp4_lib_lookup2() was not reloading first item in the rcu protected list, in case the loop was restarted. This produced soft lockups as in https://lkml.org/lkml/2013/4/16/37 rcu_dereference(X)/ACCESS_ONCE(X) seem to not work as intended if X is ptr->field : In some cases, gcc caches the value or ptr->field in a register. Use a barrier() to disallow such caching, as documented in Documentation/atomic_ops.txt line 114 Thanks a lot to Roman for providing analysis and numerous patches. Diagnosed-by: Roman Gushchin Signed-off-by: Eric Dumazet Reported-by: Boris Zhmurov Signed-off-by: Roman Gushchin Acked-by: Paul E. McKenney Signed-off-by: David S. Miller --- include/linux/rculist_nulls.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/rculist_nulls.h b/include/linux/rculist_nulls.h index 2ae13714828b..1c33dd7da4a7 100644 --- a/include/linux/rculist_nulls.h +++ b/include/linux/rculist_nulls.h @@ -105,9 +105,14 @@ static inline void hlist_nulls_add_head_rcu(struct hlist_nulls_node *n, * @head: the head for your list. * @member: the name of the hlist_nulls_node within the struct. * + * The barrier() is needed to make sure compiler doesn't cache first element [1], + * as this loop can be restarted [2] + * [1] Documentation/atomic_ops.txt around line 114 + * [2] Documentation/RCU/rculist_nulls.txt around line 146 */ #define hlist_nulls_for_each_entry_rcu(tpos, pos, head, member) \ - for (pos = rcu_dereference_raw(hlist_nulls_first_rcu(head)); \ + for (({barrier();}), \ + pos = rcu_dereference_raw(hlist_nulls_first_rcu(head)); \ (!is_a_nulls(pos)) && \ ({ tpos = hlist_nulls_entry(pos, typeof(*tpos), member); 1; }); \ pos = rcu_dereference_raw(hlist_nulls_next_rcu(pos))) -- cgit v1.2.3 From 01cb71d2d47b78354358e4bb938bb06323e17498 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 2 Jun 2013 13:55:05 +0000 Subject: net_sched: restore "overhead xxx" handling commit 56b765b79 ("htb: improved accuracy at high rates") broke the "overhead xxx" handling, as well as the "linklayer atm" attribute. tc class add ... htb rate X ceil Y linklayer atm overhead 10 This patch restores the "overhead xxx" handling, for htb, tbf and act_police The "linklayer atm" thing needs a separate fix. Reported-by: Jesper Dangaard Brouer Signed-off-by: Eric Dumazet Cc: Vimalkumar Cc: Jiri Pirko Signed-off-by: David S. Miller --- include/net/sch_generic.h | 18 +++++++++++------- net/sched/act_police.c | 8 ++++---- net/sched/sch_generic.c | 8 +++++--- net/sched/sch_htb.c | 8 ++++---- net/sched/sch_tbf.c | 8 ++++---- 5 files changed, 28 insertions(+), 22 deletions(-) (limited to 'include') diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h index f10818fc8804..e7f4e21cc3e1 100644 --- a/include/net/sch_generic.h +++ b/include/net/sch_generic.h @@ -679,22 +679,26 @@ static inline struct sk_buff *skb_act_clone(struct sk_buff *skb, gfp_t gfp_mask, #endif struct psched_ratecfg { - u64 rate_bps; - u32 mult; - u32 shift; + u64 rate_bps; + u32 mult; + u16 overhead; + u8 shift; }; static inline u64 psched_l2t_ns(const struct psched_ratecfg *r, unsigned int len) { - return ((u64)len * r->mult) >> r->shift; + return ((u64)(len + r->overhead) * r->mult) >> r->shift; } -extern void psched_ratecfg_precompute(struct psched_ratecfg *r, u32 rate); +extern void psched_ratecfg_precompute(struct psched_ratecfg *r, const struct tc_ratespec *conf); -static inline u32 psched_ratecfg_getrate(const struct psched_ratecfg *r) +static inline void psched_ratecfg_getrate(struct tc_ratespec *res, + const struct psched_ratecfg *r) { - return r->rate_bps >> 3; + memset(res, 0, sizeof(*res)); + res->rate = r->rate_bps >> 3; + res->overhead = r->overhead; } #endif diff --git a/net/sched/act_police.c b/net/sched/act_police.c index 823463adbd21..189e3c5b3d09 100644 --- a/net/sched/act_police.c +++ b/net/sched/act_police.c @@ -231,14 +231,14 @@ override: } if (R_tab) { police->rate_present = true; - psched_ratecfg_precompute(&police->rate, R_tab->rate.rate); + psched_ratecfg_precompute(&police->rate, &R_tab->rate); qdisc_put_rtab(R_tab); } else { police->rate_present = false; } if (P_tab) { police->peak_present = true; - psched_ratecfg_precompute(&police->peak, P_tab->rate.rate); + psched_ratecfg_precompute(&police->peak, &P_tab->rate); qdisc_put_rtab(P_tab); } else { police->peak_present = false; @@ -376,9 +376,9 @@ tcf_act_police_dump(struct sk_buff *skb, struct tc_action *a, int bind, int ref) }; if (police->rate_present) - opt.rate.rate = psched_ratecfg_getrate(&police->rate); + psched_ratecfg_getrate(&opt.rate, &police->rate); if (police->peak_present) - opt.peakrate.rate = psched_ratecfg_getrate(&police->peak); + psched_ratecfg_getrate(&opt.peakrate, &police->peak); if (nla_put(skb, TCA_POLICE_TBF, sizeof(opt), &opt)) goto nla_put_failure; if (police->tcfp_result && diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index eac7e0ee23c1..20224086cc28 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -898,14 +898,16 @@ void dev_shutdown(struct net_device *dev) WARN_ON(timer_pending(&dev->watchdog_timer)); } -void psched_ratecfg_precompute(struct psched_ratecfg *r, u32 rate) +void psched_ratecfg_precompute(struct psched_ratecfg *r, + const struct tc_ratespec *conf) { u64 factor; u64 mult; int shift; - r->rate_bps = (u64)rate << 3; - r->shift = 0; + memset(r, 0, sizeof(*r)); + r->overhead = conf->overhead; + r->rate_bps = (u64)conf->rate << 3; r->mult = 1; /* * Calibrate mult, shift so that token counting is accurate diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index 79b1876b6cd2..f87fb850b7ef 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -1090,9 +1090,9 @@ static int htb_dump_class(struct Qdisc *sch, unsigned long arg, memset(&opt, 0, sizeof(opt)); - opt.rate.rate = psched_ratecfg_getrate(&cl->rate); + psched_ratecfg_getrate(&opt.rate, &cl->rate); opt.buffer = PSCHED_NS2TICKS(cl->buffer); - opt.ceil.rate = psched_ratecfg_getrate(&cl->ceil); + psched_ratecfg_getrate(&opt.ceil, &cl->ceil); opt.cbuffer = PSCHED_NS2TICKS(cl->cbuffer); opt.quantum = cl->quantum; opt.prio = cl->prio; @@ -1459,8 +1459,8 @@ static int htb_change_class(struct Qdisc *sch, u32 classid, cl->prio = TC_HTB_NUMPRIO - 1; } - psched_ratecfg_precompute(&cl->rate, hopt->rate.rate); - psched_ratecfg_precompute(&cl->ceil, hopt->ceil.rate); + psched_ratecfg_precompute(&cl->rate, &hopt->rate); + psched_ratecfg_precompute(&cl->ceil, &hopt->ceil); cl->buffer = PSCHED_TICKS2NS(hopt->buffer); cl->cbuffer = PSCHED_TICKS2NS(hopt->buffer); diff --git a/net/sched/sch_tbf.c b/net/sched/sch_tbf.c index c8388f3c3426..e478d316602b 100644 --- a/net/sched/sch_tbf.c +++ b/net/sched/sch_tbf.c @@ -298,9 +298,9 @@ static int tbf_change(struct Qdisc *sch, struct nlattr *opt) q->tokens = q->buffer; q->ptokens = q->mtu; - psched_ratecfg_precompute(&q->rate, rtab->rate.rate); + psched_ratecfg_precompute(&q->rate, &rtab->rate); if (ptab) { - psched_ratecfg_precompute(&q->peak, ptab->rate.rate); + psched_ratecfg_precompute(&q->peak, &ptab->rate); q->peak_present = true; } else { q->peak_present = false; @@ -350,9 +350,9 @@ static int tbf_dump(struct Qdisc *sch, struct sk_buff *skb) goto nla_put_failure; opt.limit = q->limit; - opt.rate.rate = psched_ratecfg_getrate(&q->rate); + psched_ratecfg_getrate(&opt.rate, &q->rate); if (q->peak_present) - opt.peakrate.rate = psched_ratecfg_getrate(&q->peak); + psched_ratecfg_getrate(&opt.peakrate, &q->peak); else memset(&opt.peakrate, 0, sizeof(opt.peakrate)); opt.mtu = PSCHED_NS2TICKS(q->mtu); -- cgit v1.2.3 From 8b94ca61d7065fa7fa7bdb08ce31a9385be5205b Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 21 May 2013 04:16:28 -0300 Subject: [media] v4l2-mem2mem: add v4l2_m2m_create_bufs helper Signed-off-by: Philipp Zabel Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/v4l2-core/v4l2-mem2mem.c | 14 ++++++++++++++ include/media/v4l2-mem2mem.h | 2 ++ 2 files changed, 16 insertions(+) (limited to 'include') diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c index 9ac39b5d5830..a756170dbe7b 100644 --- a/drivers/media/v4l2-core/v4l2-mem2mem.c +++ b/drivers/media/v4l2-core/v4l2-mem2mem.c @@ -371,6 +371,20 @@ int v4l2_m2m_dqbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, } EXPORT_SYMBOL_GPL(v4l2_m2m_dqbuf); +/** + * v4l2_m2m_create_bufs() - create a source or destination buffer, depending + * on the type + */ +int v4l2_m2m_create_bufs(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, + struct v4l2_create_buffers *create) +{ + struct vb2_queue *vq; + + vq = v4l2_m2m_get_vq(m2m_ctx, create->format.type); + return vb2_create_bufs(vq, create); +} +EXPORT_SYMBOL_GPL(v4l2_m2m_create_bufs); + /** * v4l2_m2m_expbuf() - export a source or destination buffer, depending on * the type diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h index d3eef01da648..0f4555b2a31b 100644 --- a/include/media/v4l2-mem2mem.h +++ b/include/media/v4l2-mem2mem.h @@ -110,6 +110,8 @@ int v4l2_m2m_qbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, struct v4l2_buffer *buf); int v4l2_m2m_dqbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, struct v4l2_buffer *buf); +int v4l2_m2m_create_bufs(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, + struct v4l2_create_buffers *create); int v4l2_m2m_expbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, struct v4l2_exportbuffer *eb); -- cgit v1.2.3 From 066a1a5fca0e188c41636d0874ab7495f24f595b Mon Sep 17 00:00:00 2001 From: James Hogan Date: Wed, 22 May 2013 12:29:22 +0100 Subject: KVM: add kvm_para_available to asm-generic/kvm_para.h According to include/uapi/linux/kvm_para.h architectures should define kvm_para_available, so add an implementation to asm-generic/kvm_para.h which just returns false. This fixes intel8x0.c build failure on mips with KVM enabled. Signed-off-by: James Hogan Cc: Marcelo Tosatti Cc: Gleb Natapov Cc: Arnd Bergmann Signed-off-by: Gleb Natapov --- include/asm-generic/kvm_para.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include') diff --git a/include/asm-generic/kvm_para.h b/include/asm-generic/kvm_para.h index 9d96605f160a..fa25becbdcaf 100644 --- a/include/asm-generic/kvm_para.h +++ b/include/asm-generic/kvm_para.h @@ -18,4 +18,9 @@ static inline unsigned int kvm_arch_para_features(void) return 0; } +static inline bool kvm_para_available(void) +{ + return false; +} + #endif -- cgit v1.2.3 From 29eb77825cc7da8d45b642de2de3d423dc8a363f Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 5 Jun 2013 12:26:50 +0200 Subject: arch, mm: Remove tlb_fast_mode() Since the introduction of preemptible mmu_gather TLB fast mode has been broken. TLB fast mode relies on there being absolutely no concurrency; it frees pages first and invalidates TLBs later. However now we can get concurrency and stuff goes *bang*. This patch removes all tlb_fast_mode() code; it was found the better option vs trying to patch the hole by entangling tlb invalidation with the scheduler. Cc: Thomas Gleixner Cc: Russell King Cc: Tony Luck Reported-by: Max Filippov Signed-off-by: Peter Zijlstra Signed-off-by: Linus Torvalds --- arch/arm/include/asm/tlb.h | 27 ++++----------------------- arch/ia64/include/asm/tlb.h | 41 ++++++++--------------------------------- include/asm-generic/tlb.h | 17 +---------------- mm/memory.c | 9 --------- 4 files changed, 13 insertions(+), 81 deletions(-) (limited to 'include') diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 99a19512ee26..bdf2b8458ec1 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -33,18 +33,6 @@ #include #include -/* - * We need to delay page freeing for SMP as other CPUs can access pages - * which have been removed but not yet had their TLB entries invalidated. - * Also, as ARMv7 speculative prefetch can drag new entries into the TLB, - * we need to apply this same delaying tactic to ensure correct operation. - */ -#if defined(CONFIG_SMP) || defined(CONFIG_CPU_32v7) -#define tlb_fast_mode(tlb) 0 -#else -#define tlb_fast_mode(tlb) 1 -#endif - #define MMU_GATHER_BUNDLE 8 /* @@ -112,12 +100,10 @@ static inline void __tlb_alloc_page(struct mmu_gather *tlb) static inline void tlb_flush_mmu(struct mmu_gather *tlb) { tlb_flush(tlb); - if (!tlb_fast_mode(tlb)) { - free_pages_and_swap_cache(tlb->pages, tlb->nr); - tlb->nr = 0; - if (tlb->pages == tlb->local) - __tlb_alloc_page(tlb); - } + free_pages_and_swap_cache(tlb->pages, tlb->nr); + tlb->nr = 0; + if (tlb->pages == tlb->local) + __tlb_alloc_page(tlb); } static inline void @@ -178,11 +164,6 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) static inline int __tlb_remove_page(struct mmu_gather *tlb, struct page *page) { - if (tlb_fast_mode(tlb)) { - free_page_and_swap_cache(page); - return 1; /* avoid calling tlb_flush_mmu */ - } - tlb->pages[tlb->nr++] = page; VM_BUG_ON(tlb->nr > tlb->max); return tlb->max - tlb->nr; diff --git a/arch/ia64/include/asm/tlb.h b/arch/ia64/include/asm/tlb.h index c3ffe3e54edc..ef3a9de01954 100644 --- a/arch/ia64/include/asm/tlb.h +++ b/arch/ia64/include/asm/tlb.h @@ -46,12 +46,6 @@ #include #include -#ifdef CONFIG_SMP -# define tlb_fast_mode(tlb) ((tlb)->nr == ~0U) -#else -# define tlb_fast_mode(tlb) (1) -#endif - /* * If we can't allocate a page to make a big batch of page pointers * to work on, then just handle a few from the on-stack structure. @@ -60,7 +54,7 @@ struct mmu_gather { struct mm_struct *mm; - unsigned int nr; /* == ~0U => fast mode */ + unsigned int nr; unsigned int max; unsigned char fullmm; /* non-zero means full mm flush */ unsigned char need_flush; /* really unmapped some PTEs? */ @@ -103,6 +97,7 @@ extern struct ia64_tr_entry *ia64_idtrs[NR_CPUS]; static inline void ia64_tlb_flush_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long end) { + unsigned long i; unsigned int nr; if (!tlb->need_flush) @@ -141,13 +136,11 @@ ia64_tlb_flush_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long e /* lastly, release the freed pages */ nr = tlb->nr; - if (!tlb_fast_mode(tlb)) { - unsigned long i; - tlb->nr = 0; - tlb->start_addr = ~0UL; - for (i = 0; i < nr; ++i) - free_page_and_swap_cache(tlb->pages[i]); - } + + tlb->nr = 0; + tlb->start_addr = ~0UL; + for (i = 0; i < nr; ++i) + free_page_and_swap_cache(tlb->pages[i]); } static inline void __tlb_alloc_page(struct mmu_gather *tlb) @@ -167,20 +160,7 @@ tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int full_m tlb->mm = mm; tlb->max = ARRAY_SIZE(tlb->local); tlb->pages = tlb->local; - /* - * Use fast mode if only 1 CPU is online. - * - * It would be tempting to turn on fast-mode for full_mm_flush as well. But this - * doesn't work because of speculative accesses and software prefetching: the page - * table of "mm" may (and usually is) the currently active page table and even - * though the kernel won't do any user-space accesses during the TLB shoot down, a - * compiler might use speculation or lfetch.fault on what happens to be a valid - * user-space address. This in turn could trigger a TLB miss fault (or a VHPT - * walk) and re-insert a TLB entry we just removed. Slow mode avoids such - * problems. (We could make fast-mode work by switching the current task to a - * different "mm" during the shootdown.) --davidm 08/02/2002 - */ - tlb->nr = (num_online_cpus() == 1) ? ~0U : 0; + tlb->nr = 0; tlb->fullmm = full_mm_flush; tlb->start_addr = ~0UL; } @@ -214,11 +194,6 @@ static inline int __tlb_remove_page(struct mmu_gather *tlb, struct page *page) { tlb->need_flush = 1; - if (tlb_fast_mode(tlb)) { - free_page_and_swap_cache(page); - return 1; /* avoid calling tlb_flush_mmu */ - } - if (!tlb->nr && tlb->pages == tlb->local) __tlb_alloc_page(tlb); diff --git a/include/asm-generic/tlb.h b/include/asm-generic/tlb.h index b1b1fa6ffffe..13821c339a41 100644 --- a/include/asm-generic/tlb.h +++ b/include/asm-generic/tlb.h @@ -97,11 +97,9 @@ struct mmu_gather { unsigned long start; unsigned long end; unsigned int need_flush : 1, /* Did free PTEs */ - fast_mode : 1; /* No batching */ - /* we are in the middle of an operation to clear * a full mm and can make some optimizations */ - unsigned int fullmm : 1, + fullmm : 1, /* we have performed an operation which * requires a complete flush of the tlb */ need_flush_all : 1; @@ -114,19 +112,6 @@ struct mmu_gather { #define HAVE_GENERIC_MMU_GATHER -static inline int tlb_fast_mode(struct mmu_gather *tlb) -{ -#ifdef CONFIG_SMP - return tlb->fast_mode; -#else - /* - * For UP we don't need to worry about TLB flush - * and page free order so much.. - */ - return 1; -#endif -} - void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, bool fullmm); void tlb_flush_mmu(struct mmu_gather *tlb); void tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, diff --git a/mm/memory.c b/mm/memory.c index 6dc1882fbd72..61a262b08e53 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -220,7 +220,6 @@ void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, bool fullmm) tlb->start = -1UL; tlb->end = 0; tlb->need_flush = 0; - tlb->fast_mode = (num_possible_cpus() == 1); tlb->local.next = NULL; tlb->local.nr = 0; tlb->local.max = ARRAY_SIZE(tlb->__pages); @@ -244,9 +243,6 @@ void tlb_flush_mmu(struct mmu_gather *tlb) tlb_table_flush(tlb); #endif - if (tlb_fast_mode(tlb)) - return; - for (batch = &tlb->local; batch; batch = batch->next) { free_pages_and_swap_cache(batch->pages, batch->nr); batch->nr = 0; @@ -288,11 +284,6 @@ int __tlb_remove_page(struct mmu_gather *tlb, struct page *page) VM_BUG_ON(!tlb->need_flush); - if (tlb_fast_mode(tlb)) { - free_page_and_swap_cache(page); - return 1; /* avoid calling tlb_flush_mmu() */ - } - batch = tlb->active; batch->pages[batch->nr++] = page; if (batch->nr == batch->max) { -- cgit v1.2.3 From a7526eb5d06b0084ef12d7b168d008fcf516caab Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Wed, 5 Jun 2013 19:38:26 +0000 Subject: net: Unbreak compat_sys_{send,recv}msg I broke them in this commit: commit 1be374a0518a288147c6a7398792583200a67261 Author: Andy Lutomirski Date: Wed May 22 14:07:44 2013 -0700 net: Block MSG_CMSG_COMPAT in send(m)msg and recv(m)msg This patch adds __sys_sendmsg and __sys_sendmsg as common helpers that accept MSG_CMSG_COMPAT and blocks MSG_CMSG_COMPAT at the syscall entrypoints. It also reverts some unnecessary checks in sys_socketcall. Apparently I was suffering from underscore blindness the first time around. Signed-off-by: Andy Lutomirski Tested-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/socket.h | 3 +++ net/compat.c | 13 +++++++-- net/socket.c | 72 +++++++++++++++++++++++--------------------------- 3 files changed, 47 insertions(+), 41 deletions(-) (limited to 'include') diff --git a/include/linux/socket.h b/include/linux/socket.h index 33bf2dfab19d..b10ce4b341ea 100644 --- a/include/linux/socket.h +++ b/include/linux/socket.h @@ -320,6 +320,9 @@ extern int put_cmsg(struct msghdr*, int level, int type, int len, void *data); struct timespec; +/* The __sys_...msg variants allow MSG_CMSG_COMPAT */ +extern long __sys_recvmsg(int fd, struct msghdr __user *msg, unsigned flags); +extern long __sys_sendmsg(int fd, struct msghdr __user *msg, unsigned flags); extern int __sys_recvmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen, unsigned int flags, struct timespec *timeout); extern int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg, diff --git a/net/compat.c b/net/compat.c index 79ae88485001..f0a1ba6c8086 100644 --- a/net/compat.c +++ b/net/compat.c @@ -734,19 +734,25 @@ static unsigned char nas[21] = { asmlinkage long compat_sys_sendmsg(int fd, struct compat_msghdr __user *msg, unsigned int flags) { - return sys_sendmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT); + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; + return __sys_sendmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT); } asmlinkage long compat_sys_sendmmsg(int fd, struct compat_mmsghdr __user *mmsg, unsigned int vlen, unsigned int flags) { + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; return __sys_sendmmsg(fd, (struct mmsghdr __user *)mmsg, vlen, flags | MSG_CMSG_COMPAT); } asmlinkage long compat_sys_recvmsg(int fd, struct compat_msghdr __user *msg, unsigned int flags) { - return sys_recvmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT); + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; + return __sys_recvmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT); } asmlinkage long compat_sys_recv(int fd, void __user *buf, size_t len, unsigned int flags) @@ -768,6 +774,9 @@ asmlinkage long compat_sys_recvmmsg(int fd, struct compat_mmsghdr __user *mmsg, int datagrams; struct timespec ktspec; + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; + if (COMPAT_USE_64BIT_TIME) return __sys_recvmmsg(fd, (struct mmsghdr __user *)mmsg, vlen, flags | MSG_CMSG_COMPAT, diff --git a/net/socket.c b/net/socket.c index 9ff6366fee13..4ca1526db756 100644 --- a/net/socket.c +++ b/net/socket.c @@ -1956,7 +1956,7 @@ struct used_address { unsigned int name_len; }; -static int __sys_sendmsg(struct socket *sock, struct msghdr __user *msg, +static int ___sys_sendmsg(struct socket *sock, struct msghdr __user *msg, struct msghdr *msg_sys, unsigned int flags, struct used_address *used_address) { @@ -2071,26 +2071,30 @@ out: * BSD sendmsg interface */ -SYSCALL_DEFINE3(sendmsg, int, fd, struct msghdr __user *, msg, unsigned int, flags) +long __sys_sendmsg(int fd, struct msghdr __user *msg, unsigned flags) { int fput_needed, err; struct msghdr msg_sys; struct socket *sock; - if (flags & MSG_CMSG_COMPAT) - return -EINVAL; - sock = sockfd_lookup_light(fd, &err, &fput_needed); if (!sock) goto out; - err = __sys_sendmsg(sock, msg, &msg_sys, flags, NULL); + err = ___sys_sendmsg(sock, msg, &msg_sys, flags, NULL); fput_light(sock->file, fput_needed); out: return err; } +SYSCALL_DEFINE3(sendmsg, int, fd, struct msghdr __user *, msg, unsigned int, flags) +{ + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; + return __sys_sendmsg(fd, msg, flags); +} + /* * Linux sendmmsg interface */ @@ -2121,15 +2125,16 @@ int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen, while (datagrams < vlen) { if (MSG_CMSG_COMPAT & flags) { - err = __sys_sendmsg(sock, (struct msghdr __user *)compat_entry, - &msg_sys, flags, &used_address); + err = ___sys_sendmsg(sock, (struct msghdr __user *)compat_entry, + &msg_sys, flags, &used_address); if (err < 0) break; err = __put_user(err, &compat_entry->msg_len); ++compat_entry; } else { - err = __sys_sendmsg(sock, (struct msghdr __user *)entry, - &msg_sys, flags, &used_address); + err = ___sys_sendmsg(sock, + (struct msghdr __user *)entry, + &msg_sys, flags, &used_address); if (err < 0) break; err = put_user(err, &entry->msg_len); @@ -2158,7 +2163,7 @@ SYSCALL_DEFINE4(sendmmsg, int, fd, struct mmsghdr __user *, mmsg, return __sys_sendmmsg(fd, mmsg, vlen, flags); } -static int __sys_recvmsg(struct socket *sock, struct msghdr __user *msg, +static int ___sys_recvmsg(struct socket *sock, struct msghdr __user *msg, struct msghdr *msg_sys, unsigned int flags, int nosec) { struct compat_msghdr __user *msg_compat = @@ -2250,27 +2255,31 @@ out: * BSD recvmsg interface */ -SYSCALL_DEFINE3(recvmsg, int, fd, struct msghdr __user *, msg, - unsigned int, flags) +long __sys_recvmsg(int fd, struct msghdr __user *msg, unsigned flags) { int fput_needed, err; struct msghdr msg_sys; struct socket *sock; - if (flags & MSG_CMSG_COMPAT) - return -EINVAL; - sock = sockfd_lookup_light(fd, &err, &fput_needed); if (!sock) goto out; - err = __sys_recvmsg(sock, msg, &msg_sys, flags, 0); + err = ___sys_recvmsg(sock, msg, &msg_sys, flags, 0); fput_light(sock->file, fput_needed); out: return err; } +SYSCALL_DEFINE3(recvmsg, int, fd, struct msghdr __user *, msg, + unsigned int, flags) +{ + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; + return __sys_recvmsg(fd, msg, flags); +} + /* * Linux recvmmsg interface */ @@ -2308,17 +2317,18 @@ int __sys_recvmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen, * No need to ask LSM for more than the first datagram. */ if (MSG_CMSG_COMPAT & flags) { - err = __sys_recvmsg(sock, (struct msghdr __user *)compat_entry, - &msg_sys, flags & ~MSG_WAITFORONE, - datagrams); + err = ___sys_recvmsg(sock, (struct msghdr __user *)compat_entry, + &msg_sys, flags & ~MSG_WAITFORONE, + datagrams); if (err < 0) break; err = __put_user(err, &compat_entry->msg_len); ++compat_entry; } else { - err = __sys_recvmsg(sock, (struct msghdr __user *)entry, - &msg_sys, flags & ~MSG_WAITFORONE, - datagrams); + err = ___sys_recvmsg(sock, + (struct msghdr __user *)entry, + &msg_sys, flags & ~MSG_WAITFORONE, + datagrams); if (err < 0) break; err = put_user(err, &entry->msg_len); @@ -2505,31 +2515,15 @@ SYSCALL_DEFINE2(socketcall, int, call, unsigned long __user *, args) (int __user *)a[4]); break; case SYS_SENDMSG: - if (a[2] & MSG_CMSG_COMPAT) { - err = -EINVAL; - break; - } err = sys_sendmsg(a0, (struct msghdr __user *)a1, a[2]); break; case SYS_SENDMMSG: - if (a[3] & MSG_CMSG_COMPAT) { - err = -EINVAL; - break; - } err = sys_sendmmsg(a0, (struct mmsghdr __user *)a1, a[2], a[3]); break; case SYS_RECVMSG: - if (a[2] & MSG_CMSG_COMPAT) { - err = -EINVAL; - break; - } err = sys_recvmsg(a0, (struct msghdr __user *)a1, a[2]); break; case SYS_RECVMMSG: - if (a[3] & MSG_CMSG_COMPAT) { - err = -EINVAL; - break; - } err = sys_recvmmsg(a0, (struct mmsghdr __user *)a1, a[2], a[3], (struct timespec __user *)a[4]); break; -- cgit v1.2.3 From 4616274d3382fa7698536d61b351e63cf0ce27f0 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 5 Jun 2013 19:36:11 +0100 Subject: ASoC: dapm: Treat DAI widgets like AIF widgets for power Even though they are virtual widgets DAI widgets still get counted for the DAPM context power management so we can't just use the active state to check if they should be powered as they may not be part of a complete path. Instead split them into input and output widgets and do the same power checks as we perform on AIFs. Reported-by: Stephen Warren Tested-by: Stephen Warren Signed-off-by: Mark Brown --- include/sound/soc-dapm.h | 3 ++- sound/soc/soc-dapm.c | 49 +++++++++++++++++++++++++----------------------- sound/soc/soc-pcm.c | 7 ++++++- 3 files changed, 34 insertions(+), 25 deletions(-) (limited to 'include') diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index d4609029f014..385c6329a967 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -450,7 +450,8 @@ enum snd_soc_dapm_type { snd_soc_dapm_aif_in, /* audio interface input */ snd_soc_dapm_aif_out, /* audio interface output */ snd_soc_dapm_siggen, /* signal generator */ - snd_soc_dapm_dai, /* link to DAI structure */ + snd_soc_dapm_dai_in, /* link to DAI structure */ + snd_soc_dapm_dai_out, snd_soc_dapm_dai_link, /* link between two DAI structures */ }; diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index a80c883bb8be..c7051c457b75 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -55,7 +55,8 @@ static int dapm_up_seq[] = { [snd_soc_dapm_clock_supply] = 1, [snd_soc_dapm_micbias] = 2, [snd_soc_dapm_dai_link] = 2, - [snd_soc_dapm_dai] = 3, + [snd_soc_dapm_dai_in] = 3, + [snd_soc_dapm_dai_out] = 3, [snd_soc_dapm_aif_in] = 3, [snd_soc_dapm_aif_out] = 3, [snd_soc_dapm_mic] = 4, @@ -92,7 +93,8 @@ static int dapm_down_seq[] = { [snd_soc_dapm_value_mux] = 9, [snd_soc_dapm_aif_in] = 10, [snd_soc_dapm_aif_out] = 10, - [snd_soc_dapm_dai] = 10, + [snd_soc_dapm_dai_in] = 10, + [snd_soc_dapm_dai_out] = 10, [snd_soc_dapm_dai_link] = 11, [snd_soc_dapm_clock_supply] = 12, [snd_soc_dapm_regulator_supply] = 12, @@ -419,7 +421,8 @@ static void dapm_set_path_status(struct snd_soc_dapm_widget *w, case snd_soc_dapm_clock_supply: case snd_soc_dapm_aif_in: case snd_soc_dapm_aif_out: - case snd_soc_dapm_dai: + case snd_soc_dapm_dai_in: + case snd_soc_dapm_dai_out: case snd_soc_dapm_hp: case snd_soc_dapm_mic: case snd_soc_dapm_spk: @@ -820,7 +823,7 @@ static int is_connected_output_ep(struct snd_soc_dapm_widget *widget, switch (widget->id) { case snd_soc_dapm_adc: case snd_soc_dapm_aif_out: - case snd_soc_dapm_dai: + case snd_soc_dapm_dai_out: if (widget->active) { widget->outputs = snd_soc_dapm_suspend_check(widget); return widget->outputs; @@ -916,7 +919,7 @@ static int is_connected_input_ep(struct snd_soc_dapm_widget *widget, switch (widget->id) { case snd_soc_dapm_dac: case snd_soc_dapm_aif_in: - case snd_soc_dapm_dai: + case snd_soc_dapm_dai_in: if (widget->active) { widget->inputs = snd_soc_dapm_suspend_check(widget); return widget->inputs; @@ -1135,16 +1138,6 @@ static int dapm_generic_check_power(struct snd_soc_dapm_widget *w) return out != 0 && in != 0; } -static int dapm_dai_check_power(struct snd_soc_dapm_widget *w) -{ - DAPM_UPDATE_STAT(w, power_checks); - - if (w->active) - return w->active; - - return dapm_generic_check_power(w); -} - /* Check to see if an ADC has power */ static int dapm_adc_check_power(struct snd_soc_dapm_widget *w) { @@ -2318,7 +2311,8 @@ static int snd_soc_dapm_add_route(struct snd_soc_dapm_context *dapm, case snd_soc_dapm_clock_supply: case snd_soc_dapm_aif_in: case snd_soc_dapm_aif_out: - case snd_soc_dapm_dai: + case snd_soc_dapm_dai_in: + case snd_soc_dapm_dai_out: case snd_soc_dapm_dai_link: list_add(&path->list, &dapm->card->paths); list_add(&path->list_sink, &wsink->sources); @@ -3129,10 +3123,12 @@ snd_soc_dapm_new_control(struct snd_soc_dapm_context *dapm, break; case snd_soc_dapm_adc: case snd_soc_dapm_aif_out: + case snd_soc_dapm_dai_out: w->power_check = dapm_adc_check_power; break; case snd_soc_dapm_dac: case snd_soc_dapm_aif_in: + case snd_soc_dapm_dai_in: w->power_check = dapm_dac_check_power; break; case snd_soc_dapm_pga: @@ -3152,9 +3148,6 @@ snd_soc_dapm_new_control(struct snd_soc_dapm_context *dapm, case snd_soc_dapm_clock_supply: w->power_check = dapm_supply_check_power; break; - case snd_soc_dapm_dai: - w->power_check = dapm_dai_check_power; - break; default: w->power_check = dapm_always_on_check_power; break; @@ -3375,7 +3368,7 @@ int snd_soc_dapm_new_dai_widgets(struct snd_soc_dapm_context *dapm, template.reg = SND_SOC_NOPM; if (dai->driver->playback.stream_name) { - template.id = snd_soc_dapm_dai; + template.id = snd_soc_dapm_dai_in; template.name = dai->driver->playback.stream_name; template.sname = dai->driver->playback.stream_name; @@ -3393,7 +3386,7 @@ int snd_soc_dapm_new_dai_widgets(struct snd_soc_dapm_context *dapm, } if (dai->driver->capture.stream_name) { - template.id = snd_soc_dapm_dai; + template.id = snd_soc_dapm_dai_out; template.name = dai->driver->capture.stream_name; template.sname = dai->driver->capture.stream_name; @@ -3423,8 +3416,13 @@ int snd_soc_dapm_link_dai_widgets(struct snd_soc_card *card) /* For each DAI widget... */ list_for_each_entry(dai_w, &card->widgets, list) { - if (dai_w->id != snd_soc_dapm_dai) + switch (dai_w->id) { + case snd_soc_dapm_dai_in: + case snd_soc_dapm_dai_out: + break; + default: continue; + } dai = dai_w->priv; @@ -3433,8 +3431,13 @@ int snd_soc_dapm_link_dai_widgets(struct snd_soc_card *card) if (w->dapm != dai_w->dapm) continue; - if (w->id == snd_soc_dapm_dai) + switch (w->id) { + case snd_soc_dapm_dai_in: + case snd_soc_dapm_dai_out: continue; + default: + break; + } if (!w->sname) continue; diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index a9fddf0fea19..ccb6be4d658d 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -928,8 +928,13 @@ static int dpcm_add_paths(struct snd_soc_pcm_runtime *fe, int stream, /* Create any new FE <--> BE connections */ for (i = 0; i < list->num_widgets; i++) { - if (list->widgets[i]->id != snd_soc_dapm_dai) + switch (list->widgets[i]->id) { + case snd_soc_dapm_dai_in: + case snd_soc_dapm_dai_out: + break; + default: continue; + } /* is there a valid BE rtd for this widget */ be = dpcm_get_be(card, list->widgets[i], stream); -- cgit v1.2.3 From d62840995a99c9766803d54e9d7923f247a1c1db Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Wed, 22 May 2013 02:41:36 -0700 Subject: trace: Allow idle-safe tracepoints to be called from irq __DECLARE_TRACE_RCU() currently creates an _rcuidle() tracepoint which may safely be invoked from what RCU considers to be an idle CPU. However, these _rcuidle() tracepoints may -not- be invoked from the handler of an irq taken from idle, because rcu_idle_enter() zeroes RCU's nesting-level counter, so that the rcu_irq_exit() returning to idle will trigger a WARN_ON_ONCE(). This commit therefore substitutes rcu_irq_enter() for rcu_idle_exit() and rcu_irq_exit() for rcu_idle_enter() in order to make the _rcuidle() tracepoints usable from irq handlers as well as from process context. Reported-by: Dave Jones Signed-off-by: Paul E. McKenney Cc: Steven Rostedt --- include/linux/tracepoint.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h index 2f322c38bd4d..f8e084d0fc77 100644 --- a/include/linux/tracepoint.h +++ b/include/linux/tracepoint.h @@ -145,8 +145,8 @@ static inline void tracepoint_synchronize_unregister(void) TP_PROTO(data_proto), \ TP_ARGS(data_args), \ TP_CONDITION(cond), \ - rcu_idle_exit(), \ - rcu_idle_enter()); \ + rcu_irq_enter(), \ + rcu_irq_exit()); \ } #else #define __DECLARE_TRACE_RCU(name, proto, args, cond, data_proto, data_args) -- cgit v1.2.3 From ed13998c319b050fc9abdb73915859dfdbe1fb38 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Wed, 5 Jun 2013 15:30:55 +0200 Subject: sock_diag: fix filter code sent to userspace Filters need to be translated to real BPF code for userland, like SO_GETFILTER. Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- include/linux/filter.h | 1 + net/core/filter.c | 2 +- net/core/sock_diag.c | 9 +++++++-- 3 files changed, 9 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/filter.h b/include/linux/filter.h index c050dcc322a4..f65f5a69db8f 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -46,6 +46,7 @@ extern int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk); extern int sk_detach_filter(struct sock *sk); extern int sk_chk_filter(struct sock_filter *filter, unsigned int flen); extern int sk_get_filter(struct sock *sk, struct sock_filter __user *filter, unsigned len); +extern void sk_decode_filter(struct sock_filter *filt, struct sock_filter *to); #ifdef CONFIG_BPF_JIT #include diff --git a/net/core/filter.c b/net/core/filter.c index dad2a178f9f8..6438f29ff266 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -778,7 +778,7 @@ int sk_detach_filter(struct sock *sk) } EXPORT_SYMBOL_GPL(sk_detach_filter); -static void sk_decode_filter(struct sock_filter *filt, struct sock_filter *to) +void sk_decode_filter(struct sock_filter *filt, struct sock_filter *to) { static const u16 decodes[] = { [BPF_S_ALU_ADD_K] = BPF_ALU|BPF_ADD|BPF_K, diff --git a/net/core/sock_diag.c b/net/core/sock_diag.c index d5bef0b0f639..a0e9cf6379de 100644 --- a/net/core/sock_diag.c +++ b/net/core/sock_diag.c @@ -73,8 +73,13 @@ int sock_diag_put_filterinfo(struct user_namespace *user_ns, struct sock *sk, goto out; } - if (filter) - memcpy(nla_data(attr), filter->insns, len); + if (filter) { + struct sock_filter *fb = (struct sock_filter *)nla_data(attr); + int i; + + for (i = 0; i < filter->len; i++, fb++) + sk_decode_filter(&filter->insns[i], fb); + } out: rcu_read_unlock(); -- cgit v1.2.3 From 2a8fedd0c142d4328ab4667847e05afe17c3295c Mon Sep 17 00:00:00 2001 From: David Daney Date: Mon, 10 Jun 2013 12:33:47 -0700 Subject: kvm: Add definition of KVM_REG_MIPS We use 0x7000000000000000ULL as 0x6000000000000000ULL is reserved for ARM64. Signed-off-by: David Daney Signed-off-by: Gleb Natapov --- include/uapi/linux/kvm.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index a5c86fc34a37..d88c8ee00c8b 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -783,6 +783,7 @@ struct kvm_dirty_tlb { #define KVM_REG_IA64 0x3000000000000000ULL #define KVM_REG_ARM 0x4000000000000000ULL #define KVM_REG_S390 0x5000000000000000ULL +#define KVM_REG_MIPS 0x7000000000000000ULL #define KVM_REG_SIZE_SHIFT 52 #define KVM_REG_SIZE_MASK 0x00f0000000000000ULL -- cgit v1.2.3 From b79462a8b9f9a452edc20c64a70a89ba3b0a6a88 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Sat, 8 Jun 2013 15:00:55 +0200 Subject: team: fix checks in team_get_first_port_txable_rcu() should be checked if "cur" is txable, not "port". Introduced by commit 6e88e1357c "team: use function team_port_txable() for determing enabled and up port" Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- include/linux/if_team.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/if_team.h b/include/linux/if_team.h index 4474557904f6..16fae6436d0e 100644 --- a/include/linux/if_team.h +++ b/include/linux/if_team.h @@ -249,12 +249,12 @@ team_get_first_port_txable_rcu(struct team *team, struct team_port *port) return port; cur = port; list_for_each_entry_continue_rcu(cur, &team->port_list, list) - if (team_port_txable(port)) + if (team_port_txable(cur)) return cur; list_for_each_entry_rcu(cur, &team->port_list, list) { if (cur == port) break; - if (team_port_txable(port)) + if (team_port_txable(cur)) return cur; } return NULL; -- cgit v1.2.3 From 96570ffcca0b872dc8626e97569d2697f374d868 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Wed, 29 May 2013 09:51:29 +0300 Subject: Bluetooth: Fix mgmt handling of power on failures If hci_dev_open fails we need to ensure that the corresponding mgmt_set_powered command gets an appropriate response. This patch fixes the missing response by adding a new mgmt_set_powered_failed function that's used to indicate a power on failure to mgmt. Since a situation with the device being rfkilled may require special handling in user space the patch uses a new dedicated mgmt status code for this. Signed-off-by: Johan Hedberg Cc: stable@vger.kernel.org Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan Signed-off-by: John W. Linville --- include/net/bluetooth/hci_core.h | 1 + include/net/bluetooth/mgmt.h | 1 + net/bluetooth/hci_core.c | 6 +++++- net/bluetooth/mgmt.c | 21 +++++++++++++++++++++ 4 files changed, 28 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 35a57cd1704c..7cb6d360d147 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -1117,6 +1117,7 @@ void hci_sock_dev_event(struct hci_dev *hdev, int event); int mgmt_control(struct sock *sk, struct msghdr *msg, size_t len); int mgmt_index_added(struct hci_dev *hdev); int mgmt_index_removed(struct hci_dev *hdev); +int mgmt_set_powered_failed(struct hci_dev *hdev, int err); int mgmt_powered(struct hci_dev *hdev, u8 powered); int mgmt_discoverable(struct hci_dev *hdev, u8 discoverable); int mgmt_connectable(struct hci_dev *hdev, u8 connectable); diff --git a/include/net/bluetooth/mgmt.h b/include/net/bluetooth/mgmt.h index 22980a7c3873..9944c3e68c5d 100644 --- a/include/net/bluetooth/mgmt.h +++ b/include/net/bluetooth/mgmt.h @@ -42,6 +42,7 @@ #define MGMT_STATUS_NOT_POWERED 0x0f #define MGMT_STATUS_CANCELLED 0x10 #define MGMT_STATUS_INVALID_INDEX 0x11 +#define MGMT_STATUS_RFKILLED 0x12 struct mgmt_hdr { __le16 opcode; diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 33843c5c4939..d817c932d634 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1555,11 +1555,15 @@ static const struct rfkill_ops hci_rfkill_ops = { static void hci_power_on(struct work_struct *work) { struct hci_dev *hdev = container_of(work, struct hci_dev, power_on); + int err; BT_DBG("%s", hdev->name); - if (hci_dev_open(hdev->id) < 0) + err = hci_dev_open(hdev->id); + if (err < 0) { + mgmt_set_powered_failed(hdev, err); return; + } if (test_bit(HCI_AUTO_OFF, &hdev->dev_flags)) queue_delayed_work(hdev->req_workqueue, &hdev->power_off, diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 5e93b24d01fd..f8ecbc70293d 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -3418,6 +3418,27 @@ new_settings: return err; } +int mgmt_set_powered_failed(struct hci_dev *hdev, int err) +{ + struct pending_cmd *cmd; + u8 status; + + cmd = mgmt_pending_find(MGMT_OP_SET_POWERED, hdev); + if (!cmd) + return -ENOENT; + + if (err == -ERFKILL) + status = MGMT_STATUS_RFKILLED; + else + status = MGMT_STATUS_FAILED; + + err = cmd_status(cmd->sk, hdev->id, MGMT_OP_SET_POWERED, status); + + mgmt_pending_remove(cmd); + + return err; +} + int mgmt_discoverable(struct hci_dev *hdev, u8 discoverable) { struct cmd_lookup match = { NULL, hdev }; -- cgit v1.2.3 From 16e53dbf10a2d7e228709a7286310e629ede5e45 Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Wed, 12 Jun 2013 14:04:36 -0700 Subject: CPU hotplug: provide a generic helper to disable/enable CPU hotplug There are instances in the kernel where we would like to disable CPU hotplug (from sysfs) during some important operation. Today the freezer code depends on this and the code to do it was kinda tailor-made for that. Restructure the code and make it generic enough to be useful for other usecases too. Signed-off-by: Srivatsa S. Bhat Signed-off-by: Robin Holt Cc: H. Peter Anvin Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Russ Anderson Cc: Robin Holt Cc: Russell King Cc: Guan Xuetao Cc: Shawn Guo Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/cpu.h | 4 ++++ kernel/cpu.c | 55 ++++++++++++++++++++++------------------------------- 2 files changed, 27 insertions(+), 32 deletions(-) (limited to 'include') diff --git a/include/linux/cpu.h b/include/linux/cpu.h index c6f6e0839b61..9f3c7e81270a 100644 --- a/include/linux/cpu.h +++ b/include/linux/cpu.h @@ -175,6 +175,8 @@ extern struct bus_type cpu_subsys; extern void get_online_cpus(void); extern void put_online_cpus(void); +extern void cpu_hotplug_disable(void); +extern void cpu_hotplug_enable(void); #define hotcpu_notifier(fn, pri) cpu_notifier(fn, pri) #define register_hotcpu_notifier(nb) register_cpu_notifier(nb) #define unregister_hotcpu_notifier(nb) unregister_cpu_notifier(nb) @@ -198,6 +200,8 @@ static inline void cpu_hotplug_driver_unlock(void) #define get_online_cpus() do { } while (0) #define put_online_cpus() do { } while (0) +#define cpu_hotplug_disable() do { } while (0) +#define cpu_hotplug_enable() do { } while (0) #define hotcpu_notifier(fn, pri) do { (void)(fn); } while (0) /* These aren't inline functions due to a GCC bug. */ #define register_hotcpu_notifier(nb) ({ (void)(nb); 0; }) diff --git a/kernel/cpu.c b/kernel/cpu.c index b5e4ab2d427e..198a38883e64 100644 --- a/kernel/cpu.c +++ b/kernel/cpu.c @@ -133,6 +133,27 @@ static void cpu_hotplug_done(void) mutex_unlock(&cpu_hotplug.lock); } +/* + * Wait for currently running CPU hotplug operations to complete (if any) and + * disable future CPU hotplug (from sysfs). The 'cpu_add_remove_lock' protects + * the 'cpu_hotplug_disabled' flag. The same lock is also acquired by the + * hotplug path before performing hotplug operations. So acquiring that lock + * guarantees mutual exclusion from any currently running hotplug operations. + */ +void cpu_hotplug_disable(void) +{ + cpu_maps_update_begin(); + cpu_hotplug_disabled = 1; + cpu_maps_update_done(); +} + +void cpu_hotplug_enable(void) +{ + cpu_maps_update_begin(); + cpu_hotplug_disabled = 0; + cpu_maps_update_done(); +} + #else /* #if CONFIG_HOTPLUG_CPU */ static void cpu_hotplug_begin(void) {} static void cpu_hotplug_done(void) {} @@ -540,36 +561,6 @@ static int __init alloc_frozen_cpus(void) } core_initcall(alloc_frozen_cpus); -/* - * Prevent regular CPU hotplug from racing with the freezer, by disabling CPU - * hotplug when tasks are about to be frozen. Also, don't allow the freezer - * to continue until any currently running CPU hotplug operation gets - * completed. - * To modify the 'cpu_hotplug_disabled' flag, we need to acquire the - * 'cpu_add_remove_lock'. And this same lock is also taken by the regular - * CPU hotplug path and released only after it is complete. Thus, we - * (and hence the freezer) will block here until any currently running CPU - * hotplug operation gets completed. - */ -void cpu_hotplug_disable_before_freeze(void) -{ - cpu_maps_update_begin(); - cpu_hotplug_disabled = 1; - cpu_maps_update_done(); -} - - -/* - * When tasks have been thawed, re-enable regular CPU hotplug (which had been - * disabled while beginning to freeze tasks). - */ -void cpu_hotplug_enable_after_thaw(void) -{ - cpu_maps_update_begin(); - cpu_hotplug_disabled = 0; - cpu_maps_update_done(); -} - /* * When callbacks for CPU hotplug notifications are being executed, we must * ensure that the state of the system with respect to the tasks being frozen @@ -589,12 +580,12 @@ cpu_hotplug_pm_callback(struct notifier_block *nb, case PM_SUSPEND_PREPARE: case PM_HIBERNATION_PREPARE: - cpu_hotplug_disable_before_freeze(); + cpu_hotplug_disable(); break; case PM_POST_SUSPEND: case PM_POST_HIBERNATION: - cpu_hotplug_enable_after_thaw(); + cpu_hotplug_enable(); break; default: -- cgit v1.2.3 From 637241a900cbd982f744d44646b48a273d609b34 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Wed, 12 Jun 2013 14:04:39 -0700 Subject: kmsg: honor dmesg_restrict sysctl on /dev/kmsg The dmesg_restrict sysctl currently covers the syslog method for access dmesg, however /dev/kmsg isn't covered by the same protections. Most people haven't noticed because util-linux dmesg(1) defaults to using the syslog method for access in older versions. With util-linux dmesg(1) defaults to reading directly from /dev/kmsg. To fix /dev/kmsg, let's compare the existing interfaces and what they allow: - /proc/kmsg allows: - open (SYSLOG_ACTION_OPEN) if CAP_SYSLOG since it uses a destructive single-reader interface (SYSLOG_ACTION_READ). - everything, after an open. - syslog syscall allows: - anything, if CAP_SYSLOG. - SYSLOG_ACTION_READ_ALL and SYSLOG_ACTION_SIZE_BUFFER, if dmesg_restrict==0. - nothing else (EPERM). The use-cases were: - dmesg(1) needs to do non-destructive SYSLOG_ACTION_READ_ALLs. - sysklog(1) needs to open /proc/kmsg, drop privs, and still issue the destructive SYSLOG_ACTION_READs. AIUI, dmesg(1) is moving to /dev/kmsg, and systemd-journald doesn't clear the ring buffer. Based on the comments in devkmsg_llseek, it sounds like actions besides reading aren't going to be supported by /dev/kmsg (i.e. SYSLOG_ACTION_CLEAR), so we have a strict subset of the non-destructive syslog syscall actions. To this end, move the check as Josh had done, but also rename the constants to reflect their new uses (SYSLOG_FROM_CALL becomes SYSLOG_FROM_READER, and SYSLOG_FROM_FILE becomes SYSLOG_FROM_PROC). SYSLOG_FROM_READER allows non-destructive actions, and SYSLOG_FROM_PROC allows destructive actions after a capabilities-constrained SYSLOG_ACTION_OPEN check. - /dev/kmsg allows: - open if CAP_SYSLOG or dmesg_restrict==0 - reading/polling, after open Addresses https://bugzilla.redhat.com/show_bug.cgi?id=903192 [akpm@linux-foundation.org: use pr_warn_once()] Signed-off-by: Kees Cook Reported-by: Christian Kujau Tested-by: Josh Boyer Cc: Kay Sievers Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/proc/kmsg.c | 10 +++--- include/linux/syslog.h | 4 +-- kernel/printk.c | 91 +++++++++++++++++++++++++++----------------------- 3 files changed, 57 insertions(+), 48 deletions(-) (limited to 'include') diff --git a/fs/proc/kmsg.c b/fs/proc/kmsg.c index bd4b5a740ff1..bdfabdaefdce 100644 --- a/fs/proc/kmsg.c +++ b/fs/proc/kmsg.c @@ -21,12 +21,12 @@ extern wait_queue_head_t log_wait; static int kmsg_open(struct inode * inode, struct file * file) { - return do_syslog(SYSLOG_ACTION_OPEN, NULL, 0, SYSLOG_FROM_FILE); + return do_syslog(SYSLOG_ACTION_OPEN, NULL, 0, SYSLOG_FROM_PROC); } static int kmsg_release(struct inode * inode, struct file * file) { - (void) do_syslog(SYSLOG_ACTION_CLOSE, NULL, 0, SYSLOG_FROM_FILE); + (void) do_syslog(SYSLOG_ACTION_CLOSE, NULL, 0, SYSLOG_FROM_PROC); return 0; } @@ -34,15 +34,15 @@ static ssize_t kmsg_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { if ((file->f_flags & O_NONBLOCK) && - !do_syslog(SYSLOG_ACTION_SIZE_UNREAD, NULL, 0, SYSLOG_FROM_FILE)) + !do_syslog(SYSLOG_ACTION_SIZE_UNREAD, NULL, 0, SYSLOG_FROM_PROC)) return -EAGAIN; - return do_syslog(SYSLOG_ACTION_READ, buf, count, SYSLOG_FROM_FILE); + return do_syslog(SYSLOG_ACTION_READ, buf, count, SYSLOG_FROM_PROC); } static unsigned int kmsg_poll(struct file *file, poll_table *wait) { poll_wait(file, &log_wait, wait); - if (do_syslog(SYSLOG_ACTION_SIZE_UNREAD, NULL, 0, SYSLOG_FROM_FILE)) + if (do_syslog(SYSLOG_ACTION_SIZE_UNREAD, NULL, 0, SYSLOG_FROM_PROC)) return POLLIN | POLLRDNORM; return 0; } diff --git a/include/linux/syslog.h b/include/linux/syslog.h index 38911391a139..98a3153c0f96 100644 --- a/include/linux/syslog.h +++ b/include/linux/syslog.h @@ -44,8 +44,8 @@ /* Return size of the log buffer */ #define SYSLOG_ACTION_SIZE_BUFFER 10 -#define SYSLOG_FROM_CALL 0 -#define SYSLOG_FROM_FILE 1 +#define SYSLOG_FROM_READER 0 +#define SYSLOG_FROM_PROC 1 int do_syslog(int type, char __user *buf, int count, bool from_file); diff --git a/kernel/printk.c b/kernel/printk.c index fa36e1494420..8212c1aef125 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -363,6 +363,53 @@ static void log_store(int facility, int level, log_next_seq++; } +#ifdef CONFIG_SECURITY_DMESG_RESTRICT +int dmesg_restrict = 1; +#else +int dmesg_restrict; +#endif + +static int syslog_action_restricted(int type) +{ + if (dmesg_restrict) + return 1; + /* + * Unless restricted, we allow "read all" and "get buffer size" + * for everybody. + */ + return type != SYSLOG_ACTION_READ_ALL && + type != SYSLOG_ACTION_SIZE_BUFFER; +} + +static int check_syslog_permissions(int type, bool from_file) +{ + /* + * If this is from /proc/kmsg and we've already opened it, then we've + * already done the capabilities checks at open time. + */ + if (from_file && type != SYSLOG_ACTION_OPEN) + return 0; + + if (syslog_action_restricted(type)) { + if (capable(CAP_SYSLOG)) + return 0; + /* + * For historical reasons, accept CAP_SYS_ADMIN too, with + * a warning. + */ + if (capable(CAP_SYS_ADMIN)) { + pr_warn_once("%s (%d): Attempt to access syslog with " + "CAP_SYS_ADMIN but no CAP_SYSLOG " + "(deprecated).\n", + current->comm, task_pid_nr(current)); + return 0; + } + return -EPERM; + } + return security_syslog(type); +} + + /* /dev/kmsg - userspace message inject/listen interface */ struct devkmsg_user { u64 seq; @@ -620,7 +667,8 @@ static int devkmsg_open(struct inode *inode, struct file *file) if ((file->f_flags & O_ACCMODE) == O_WRONLY) return 0; - err = security_syslog(SYSLOG_ACTION_READ_ALL); + err = check_syslog_permissions(SYSLOG_ACTION_READ_ALL, + SYSLOG_FROM_READER); if (err) return err; @@ -813,45 +861,6 @@ static inline void boot_delay_msec(int level) } #endif -#ifdef CONFIG_SECURITY_DMESG_RESTRICT -int dmesg_restrict = 1; -#else -int dmesg_restrict; -#endif - -static int syslog_action_restricted(int type) -{ - if (dmesg_restrict) - return 1; - /* Unless restricted, we allow "read all" and "get buffer size" for everybody */ - return type != SYSLOG_ACTION_READ_ALL && type != SYSLOG_ACTION_SIZE_BUFFER; -} - -static int check_syslog_permissions(int type, bool from_file) -{ - /* - * If this is from /proc/kmsg and we've already opened it, then we've - * already done the capabilities checks at open time. - */ - if (from_file && type != SYSLOG_ACTION_OPEN) - return 0; - - if (syslog_action_restricted(type)) { - if (capable(CAP_SYSLOG)) - return 0; - /* For historical reasons, accept CAP_SYS_ADMIN too, with a warning */ - if (capable(CAP_SYS_ADMIN)) { - printk_once(KERN_WARNING "%s (%d): " - "Attempt to access syslog with CAP_SYS_ADMIN " - "but no CAP_SYSLOG (deprecated).\n", - current->comm, task_pid_nr(current)); - return 0; - } - return -EPERM; - } - return 0; -} - #if defined(CONFIG_PRINTK_TIME) static bool printk_time = 1; #else @@ -1249,7 +1258,7 @@ out: SYSCALL_DEFINE3(syslog, int, type, char __user *, buf, int, len) { - return do_syslog(type, buf, len, SYSLOG_FROM_CALL); + return do_syslog(type, buf, len, SYSLOG_FROM_READER); } /* -- cgit v1.2.3 From 30dad30922ccc733cfdbfe232090cf674dc374dc Mon Sep 17 00:00:00 2001 From: Naoya Horiguchi Date: Wed, 12 Jun 2013 14:05:04 -0700 Subject: mm: migration: add migrate_entry_wait_huge() When we have a page fault for the address which is backed by a hugepage under migration, the kernel can't wait correctly and do busy looping on hugepage fault until the migration finishes. As a result, users who try to kick hugepage migration (via soft offlining, for example) occasionally experience long delay or soft lockup. This is because pte_offset_map_lock() can't get a correct migration entry or a correct page table lock for hugepage. This patch introduces migration_entry_wait_huge() to solve this. Signed-off-by: Naoya Horiguchi Reviewed-by: Rik van Riel Reviewed-by: Wanpeng Li Reviewed-by: Michal Hocko Cc: Mel Gorman Cc: Andi Kleen Cc: KOSAKI Motohiro Cc: [2.6.35+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/swapops.h | 3 +++ mm/hugetlb.c | 2 +- mm/migrate.c | 23 ++++++++++++++++++----- 3 files changed, 22 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/linux/swapops.h b/include/linux/swapops.h index 47ead515c811..c5fd30d2a415 100644 --- a/include/linux/swapops.h +++ b/include/linux/swapops.h @@ -137,6 +137,7 @@ static inline void make_migration_entry_read(swp_entry_t *entry) extern void migration_entry_wait(struct mm_struct *mm, pmd_t *pmd, unsigned long address); +extern void migration_entry_wait_huge(struct mm_struct *mm, pte_t *pte); #else #define make_migration_entry(page, write) swp_entry(0, 0) @@ -148,6 +149,8 @@ static inline int is_migration_entry(swp_entry_t swp) static inline void make_migration_entry_read(swp_entry_t *entryp) { } static inline void migration_entry_wait(struct mm_struct *mm, pmd_t *pmd, unsigned long address) { } +static inline void migration_entry_wait_huge(struct mm_struct *mm, + pte_t *pte) { } static inline int is_write_migration_entry(swp_entry_t entry) { return 0; diff --git a/mm/hugetlb.c b/mm/hugetlb.c index f8feeeca6686..e2bfbf73a551 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -2839,7 +2839,7 @@ int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma, if (ptep) { entry = huge_ptep_get(ptep); if (unlikely(is_hugetlb_entry_migration(entry))) { - migration_entry_wait(mm, (pmd_t *)ptep, address); + migration_entry_wait_huge(mm, ptep); return 0; } else if (unlikely(is_hugetlb_entry_hwpoisoned(entry))) return VM_FAULT_HWPOISON_LARGE | diff --git a/mm/migrate.c b/mm/migrate.c index b1f57501de9c..6f0c24438bba 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -200,15 +200,14 @@ static void remove_migration_ptes(struct page *old, struct page *new) * get to the page and wait until migration is finished. * When we return from this function the fault will be retried. */ -void migration_entry_wait(struct mm_struct *mm, pmd_t *pmd, - unsigned long address) +static void __migration_entry_wait(struct mm_struct *mm, pte_t *ptep, + spinlock_t *ptl) { - pte_t *ptep, pte; - spinlock_t *ptl; + pte_t pte; swp_entry_t entry; struct page *page; - ptep = pte_offset_map_lock(mm, pmd, address, &ptl); + spin_lock(ptl); pte = *ptep; if (!is_swap_pte(pte)) goto out; @@ -236,6 +235,20 @@ out: pte_unmap_unlock(ptep, ptl); } +void migration_entry_wait(struct mm_struct *mm, pmd_t *pmd, + unsigned long address) +{ + spinlock_t *ptl = pte_lockptr(mm, pmd); + pte_t *ptep = pte_offset_map(pmd, address); + __migration_entry_wait(mm, ptep, ptl); +} + +void migration_entry_wait_huge(struct mm_struct *mm, pte_t *pte) +{ + spinlock_t *ptl = &(mm)->page_table_lock; + __migration_entry_wait(mm, pte, ptl); +} + #ifdef CONFIG_BLOCK /* Returns true if all buffers are successfully locked */ static bool buffer_migrate_lock_buffers(struct buffer_head *head, -- cgit v1.2.3 From c2853c8df57f49620d26f317d7d43347c29bfc2e Mon Sep 17 00:00:00 2001 From: Alex Shi Date: Wed, 12 Jun 2013 14:05:10 -0700 Subject: include/linux/math64.h: add div64_ul() There is div64_long() to handle the s64/long division, but no mocro do u64/ul division. It is necessary in some scenarios, so add this function. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Alex Shi Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/math64.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/math64.h b/include/linux/math64.h index b8ba85544721..2913b86eb12a 100644 --- a/include/linux/math64.h +++ b/include/linux/math64.h @@ -6,7 +6,8 @@ #if BITS_PER_LONG == 64 -#define div64_long(x,y) div64_s64((x),(y)) +#define div64_long(x, y) div64_s64((x), (y)) +#define div64_ul(x, y) div64_u64((x), (y)) /** * div_u64_rem - unsigned 64bit divide with 32bit divisor with remainder @@ -47,7 +48,8 @@ static inline s64 div64_s64(s64 dividend, s64 divisor) #elif BITS_PER_LONG == 32 -#define div64_long(x,y) div_s64((x),(y)) +#define div64_long(x, y) div_s64((x), (y)) +#define div64_ul(x, y) div_u64((x), (y)) #ifndef div_u64_rem static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder) -- cgit v1.2.3 From d3b6f6141831b6e2d414edea6cc7af5b9bc6fac2 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 7 Jun 2013 13:26:05 -0700 Subject: ip_tunnel: remove __net_init/exit from exported functions If CONFIG_NET_NS is not set then __net_init is the same as __init and __net_exit is the same as __exit. These functions will be removed from memory after the module loads or is removed. Functions that are exported for use by other functions should never be labeled for removal. Bug introduced by commit c54419321455631079c ("GRE: Refactor GRE tunneling code.") Reported-by: Steinar H. Gunderson Signed-off-by: Steven Rostedt Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/ip_tunnels.h | 6 +++--- net/ipv4/ip_tunnel.c | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/net/ip_tunnels.h b/include/net/ip_tunnels.h index 4b6f0b28f41f..09b1360e10bf 100644 --- a/include/net/ip_tunnels.h +++ b/include/net/ip_tunnels.h @@ -95,10 +95,10 @@ struct ip_tunnel_net { int ip_tunnel_init(struct net_device *dev); void ip_tunnel_uninit(struct net_device *dev); void ip_tunnel_dellink(struct net_device *dev, struct list_head *head); -int __net_init ip_tunnel_init_net(struct net *net, int ip_tnl_net_id, - struct rtnl_link_ops *ops, char *devname); +int ip_tunnel_init_net(struct net *net, int ip_tnl_net_id, + struct rtnl_link_ops *ops, char *devname); -void __net_exit ip_tunnel_delete_net(struct ip_tunnel_net *itn); +void ip_tunnel_delete_net(struct ip_tunnel_net *itn); void ip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev, const struct iphdr *tnl_params); diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c index be2f8da0ae8e..7fa8f08fa7ae 100644 --- a/net/ipv4/ip_tunnel.c +++ b/net/ipv4/ip_tunnel.c @@ -853,7 +853,7 @@ void ip_tunnel_dellink(struct net_device *dev, struct list_head *head) } EXPORT_SYMBOL_GPL(ip_tunnel_dellink); -int __net_init ip_tunnel_init_net(struct net *net, int ip_tnl_net_id, +int ip_tunnel_init_net(struct net *net, int ip_tnl_net_id, struct rtnl_link_ops *ops, char *devname) { struct ip_tunnel_net *itn = net_generic(net, ip_tnl_net_id); @@ -899,7 +899,7 @@ static void ip_tunnel_destroy(struct ip_tunnel_net *itn, struct list_head *head) unregister_netdevice_queue(itn->fb_tunnel_dev, head); } -void __net_exit ip_tunnel_delete_net(struct ip_tunnel_net *itn) +void ip_tunnel_delete_net(struct ip_tunnel_net *itn) { LIST_HEAD(list); -- cgit v1.2.3 From f21afc25f9ed45b8ffe200d0f071b0caec3ed2ef Mon Sep 17 00:00:00 2001 From: David Daney Date: Fri, 14 Jun 2013 11:13:59 -0700 Subject: smp.h: Use local_irq_{save,restore}() in !SMP version of on_each_cpu(). Thanks to commit f91eb62f71b3 ("init: scream bloody murder if interrupts are enabled too early"), "bloody murder" is now being screamed. With a MIPS OCTEON config, we use on_each_cpu() in our irq_chip.irq_bus_sync_unlock() function. This gets called in early as a result of the time_init() call. Because the !SMP version of on_each_cpu() unconditionally enables irqs, we get: WARNING: at init/main.c:560 start_kernel+0x250/0x410() Interrupts were enabled early CPU: 0 PID: 0 Comm: swapper Not tainted 3.10.0-rc5-Cavium-Octeon+ #801 Call Trace: show_stack+0x68/0x80 warn_slowpath_common+0x78/0xb0 warn_slowpath_fmt+0x38/0x48 start_kernel+0x250/0x410 Suggested fix: Do what we already do in the SMP version of on_each_cpu(), and use local_irq_save/local_irq_restore. Because we need a flags variable, make it a static inline to avoid name space issues. [ Change from v1: Convert on_each_cpu to a static inline function, add #include to avoid build breakage on some files. on_each_cpu_mask() and on_each_cpu_cond() suffer the same problem as on_each_cpu(), but they are not causing !SMP bugs for me, so I will defer changing them to a less urgent patch. ] Signed-off-by: David Daney Cc: Ralf Baechle Cc: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/smp.h | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/include/linux/smp.h b/include/linux/smp.h index e6564c1dc552..c8488763277f 100644 --- a/include/linux/smp.h +++ b/include/linux/smp.h @@ -11,6 +11,7 @@ #include #include #include +#include extern void cpu_idle(void); @@ -139,13 +140,17 @@ static inline int up_smp_call_function(smp_call_func_t func, void *info) } #define smp_call_function(func, info, wait) \ (up_smp_call_function(func, info)) -#define on_each_cpu(func,info,wait) \ - ({ \ - local_irq_disable(); \ - func(info); \ - local_irq_enable(); \ - 0; \ - }) + +static inline int on_each_cpu(smp_call_func_t func, void *info, int wait) +{ + unsigned long flags; + + local_irq_save(flags); + func(info); + local_irq_restore(flags); + return 0; +} + /* * Note we still need to test the mask even for UP * because we actually can get an empty mask from -- cgit v1.2.3