From 0c2d6964562835501280409cac5d4ee28e07e8c2 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 17 Feb 2014 13:16:56 +0100 Subject: ASoC: adav80x: Split SPI and I2C code into different modules There are a few known (minor) problems with having the support code for both I2C and SPI in the same module: * We need to be extra careful to make sure to not build the driver into the kernel if one of the subsystems is build as a module (Currently only I2C can be build as a module). * The module init path error handling is rather ugly. E.g. what should be done if either the SPI or the I2C driver fails to register. Most drivers that implement SPI and I2C in the same module currently fallback to undefined behavior in that case. Splitting the the driver into two modules, one for each bus, allows the registration of the other bus drive to continue without problems if one of them fails. This patch splits the ADAV80X driver into 3 modules. One core module that implements the device logic, but is independent of the bus method used. And one module for SPI and I2C each that registers the drivers and sets up the regmap struct for the bus. Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- sound/soc/codecs/adav801.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+) create mode 100644 sound/soc/codecs/adav801.c (limited to 'sound/soc/codecs/adav801.c') diff --git a/sound/soc/codecs/adav801.c b/sound/soc/codecs/adav801.c new file mode 100644 index 000000000000..790fce33ab10 --- /dev/null +++ b/sound/soc/codecs/adav801.c @@ -0,0 +1,53 @@ +/* + * ADAV801 audio driver + * + * Copyright 2014 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#include +#include +#include + +#include + +#include "adav80x.h" + +static const struct spi_device_id adav80x_spi_id[] = { + { "adav801", 0 }, + { } +}; +MODULE_DEVICE_TABLE(spi, adav80x_spi_id); + +static int adav80x_spi_probe(struct spi_device *spi) +{ + struct regmap_config config; + + config = adav80x_regmap_config; + config.read_flag_mask = 0x01; + + return adav80x_bus_probe(&spi->dev, devm_regmap_init_spi(spi, &config)); +} + +static int adav80x_spi_remove(struct spi_device *spi) +{ + snd_soc_unregister_codec(&spi->dev); + return 0; +} + +static struct spi_driver adav80x_spi_driver = { + .driver = { + .name = "adav801", + .owner = THIS_MODULE, + }, + .probe = adav80x_spi_probe, + .remove = adav80x_spi_remove, + .id_table = adav80x_spi_id, +}; +module_spi_driver(adav80x_spi_driver); + +MODULE_DESCRIPTION("ASoC ADAV801 driver"); +MODULE_AUTHOR("Lars-Peter Clausen "); +MODULE_AUTHOR("Yi Li >"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3