From 44330ab516c15dda8a1e660eeaf0003f84e43e3f Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Tue, 13 May 2014 13:45:15 +0100 Subject: ASoC: wm8962: Update register CLASS_D_CONTROL_1 to be non-volatile The register CLASS_D_CONTROL_1 is marked as volatile because it contains a bit, DAC_MUTE, which is also mirrored in the ADC_DAC_CONTROL_1 register. This causes problems for the "Speaker Switch" control, which will report an error if the CODEC is suspended because it relies on a volatile register. To resolve this issue mark CLASS_D_CONTROL_1 as non-volatile and manually keep the register cache in sync by updating both bits when changing the mute status. Reported-by: Shawn Guo Signed-off-by: Charles Keepax Tested-by: Shawn Guo Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm8962.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) (limited to 'sound/soc/codecs/wm8962.c') diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 5522d2566c67..ecd26dd2e442 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -154,6 +154,7 @@ static struct reg_default wm8962_reg[] = { { 40, 0x0000 }, /* R40 - SPKOUTL volume */ { 41, 0x0000 }, /* R41 - SPKOUTR volume */ + { 49, 0x0010 }, /* R49 - Class D Control 1 */ { 51, 0x0003 }, /* R51 - Class D Control 2 */ { 56, 0x0506 }, /* R56 - Clocking 4 */ @@ -795,7 +796,6 @@ static bool wm8962_volatile_register(struct device *dev, unsigned int reg) case WM8962_ALC2: case WM8962_THERMAL_SHUTDOWN_STATUS: case WM8962_ADDITIONAL_CONTROL_4: - case WM8962_CLASS_D_CONTROL_1: case WM8962_DC_SERVO_6: case WM8962_INTERRUPT_STATUS_1: case WM8962_INTERRUPT_STATUS_2: @@ -2929,13 +2929,22 @@ static int wm8962_set_fll(struct snd_soc_codec *codec, int fll_id, int source, static int wm8962_mute(struct snd_soc_dai *dai, int mute) { struct snd_soc_codec *codec = dai->codec; - int val; + int val, ret; if (mute) - val = WM8962_DAC_MUTE; + val = WM8962_DAC_MUTE | WM8962_DAC_MUTE_ALT; else val = 0; + /** + * The DAC mute bit is mirrored in two registers, update both to keep + * the register cache consistent. + */ + ret = snd_soc_update_bits(codec, WM8962_CLASS_D_CONTROL_1, + WM8962_DAC_MUTE_ALT, val); + if (ret < 0) + return ret; + return snd_soc_update_bits(codec, WM8962_ADC_DAC_CONTROL_1, WM8962_DAC_MUTE, val); } -- cgit v1.2.3