/* Copyright (C) 2004 Mips Technologies, Inc */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * This file should be built into the kernel only if CONFIG_MIPS_MT_SMTC is set. */ #define MIPS_CPU_IPI_IRQ 1 #define LOCK_MT_PRA() \ local_irq_save(flags); \ mtflags = dmt() #define UNLOCK_MT_PRA() \ emt(mtflags); \ local_irq_restore(flags) #define LOCK_CORE_PRA() \ local_irq_save(flags); \ mtflags = dvpe() #define UNLOCK_CORE_PRA() \ evpe(mtflags); \ local_irq_restore(flags) /* * Data structures purely associated with SMTC parallelism */ /* * Table for tracking ASIDs whose lifetime is prolonged. */ asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS]; /* * Clock interrupt "latch" buffers, per "CPU" */ unsigned int ipi_timer_latch[NR_CPUS]; /* * Number of InterProcessor Interupt (IPI) message buffers to allocate */ #define IPIBUF_PER_CPU 4 static struct smtc_ipi_q IPIQ[NR_CPUS]; static struct smtc_ipi_q freeIPIq; /* Forward declarations */ void ipi_decode(struct smtc_ipi *); static void post_direct_ipi(int cpu, struct smtc_ipi *pipi); static void setup_cross_vpe_interrupts(unsigned int nvpe); void init_smtc_stats(void); /* Global SMTC Status */ unsigned int smtc_status = 0; /* Boot command line configuration overrides */ static int ipibuffers = 0; static int nostlb = 0; static int asidmask = 0; unsigned long smtc_asid_mask = 0xff; static int __init ipibufs(char *str) { get_option(&str, &ipibuffers); return 1; } static int __init stlb_disable(char *s) { nostlb = 1; return 1; } static int __init asidmask_set(char *str) { get_option(&str, &asidmask); switch (asidmask) { case 0x1: case 0x3: case 0x7: case 0xf: case 0x1f: case 0x3f: case 0x7f: case 0xff: smtc_asid_mask = (unsigned long)asidmask; break; default: printk("ILLEGAL ASID mask 0x%x from command line\n", asidmask); } return 1; } __setup("ipibufs=", ipibufs); __setup("nostlb", stlb_disable); __setup("asidmask=", asidmask_set); #ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG static int hang_trig = 0; static int __init hangtrig_enable(char *s) { hang_trig = 1; return 1; } __setup("hangtrig", hangtrig_enable); #define DEFAULT_BLOCKED_IPI_LIMIT 32 static int timerq_limit = DEFAULT_BLOCKED_IPI_LIMIT; static int __init tintq(char *str) { get_option(&str, &timerq_limit); return 1; } __setup("tintq=", tintq); static int imstuckcount[2][8]; /* vpemask represents IM/IE bits of per-VPE Status registers, low-to-high */ static int vpemask[2][8] = { {0, 0, 1, 0, 0, 0, 0, 1}, {0, 0, 0, 0, 0, 0, 0, 1} }; int tcnoprog[NR_CPUS]; static atomic_t idle_hook_initialized = {0}; static int clock_hang_reported[NR_CPUS]; #endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */ /* Initialize shared TLB - the should probably migrate to smtc_setup_cpus() */ void __init sanitize_tlb_entries(void) { printk("Deprecated sanitize_tlb_entries() invoked\n"); } /* * Configure shared TLB - VPC configuration bit must be set by caller */ static void smtc_configure_tlb(void) { int i,tlbsiz,vpes; unsigned long mvpconf0; unsigned long config1val; /* Set up ASID preservation table */ for (vpes=0; vpes> MVPCONF0_PVPE_SHIFT) + 1) > 1) { /* If we have multiple VPEs, try to share the TLB */ if ((mvpconf0 & MVPCONF0_TLBS) && !nostlb) { /* * If TLB sizing is programmable, shared TLB * size is the total available complement. * Otherwise, we have to take the sum of all * static VPE TLB entries. */ if ((tlbsiz = ((mvpconf0 & MVPCONF0_PTLBE) >> MVPCONF0_PTLBE_SHIFT)) == 0) { /* * If there's more than one VPE, there had better * be more than one TC, because we need one to bind * to each VPE in turn to be able to read * its configuration state! */ settc(1); /* Stop the TC from doing anything foolish */ write_tc_c0_tchalt(TCHALT_H); mips_ihb(); /* No need to un-Halt - that happens later anyway */ for (i=0; i < vpes; i++) { write_tc_c0_tcbind(i); /* * To be 100% sure we're really getting the right * information, we exit the configuration state * and do an IHB after each rebinding. */ write_c0_mvpcontrol( read_c0_mvpcontrol() & ~ MVPCONTROL_VPC ); mips_ihb(); /* * Only count if the MMU Type indicated is TLB */ if (((read_vpe_c0_config() & MIPS_CONF_MT) >> 7) == 1) { config1val = read_vpe_c0_config1(); tlbsiz += ((config1val >> 25) & 0x3f) + 1; } /* Put core back in configuration state */ write_c0_mvpcontrol( read_c0_mvpcontrol() | MVPCONTROL_VPC ); mips_ihb(); } } write_c0_mvpcontrol(read_c0_mvpcontrol() | MVPCONTROL_STLB); ehb(); /* * Setup kernel data structures to use software total, * rather than read the per-VPE Config1 value. The values * for "CPU 0" gets copied to all the other CPUs as part * of their initialization in smtc_cpu_setup(). */ /* MIPS32 limits TLB indices to 64 */ if (tlbsiz > 64) tlbsiz = 64; cpu_data[0].tlbsize = current_cpu_data.tlbsize = tlbsiz; smtc_status |= SMTC_TLB_SHARED; local_flush_tlb_all(); printk("TLB of %d entry pairs shared by %d VPEs\n", tlbsiz, vpes); } else { printk("WARNING: TLB Not Sharable on SMTC Boot!\n"); } } } /* * Incrementally build the CPU map out of constituent MIPS MT cores, * using the specified available VPEs and TCs. Plaform code needs * to ensure that each MIPS MT core invokes this routine on reset, * one at a time(!). * * This version of the build_cpu_map and prepare_cpus routines assumes * that *all* TCs of a MIPS MT core will be used for Linux, and that * they will be spread across *all* available VPEs (to minimise the * loss of efficiency due to exception service serialization). * An improved version would pick up configuration information and * possibly leave some TCs/VPEs as "slave" processors. * * Use c0_MVPConf0 to find out how many TCs are available, setting up * phys_cpu_present_map and the logical/physical mappings. */ int __init mipsmt_build_cpu_map(int start_cpu_slot) { int i, ntcs; /* * The CPU map isn't actually used for anything at this point, * so it's not clear what else we should do apart from set * everything up so that "logical" = "physical". */ ntcs = ((read_c0_mvpconf0() & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1; for (i=start_cpu_slot; i 0) printk("Limit of %d VPEs set\n", vpelimit); if (tclimit > 0) printk("Limit of %d TCs set\n", tclimit); if (nostlb) { printk("Shared TLB Use Inhibited - UNSAFE for Multi-VPE Operation\n"); } if (asidmask) printk("ASID mask value override to 0x%x\n", asidmask); /* Temporary */ #ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG if (hang_trig) printk("Logic Analyser Trigger on suspected TC hang\n"); #endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */ /* Put MVPE's into 'configuration state' */ write_c0_mvpcontrol( read_c0_mvpcontrol() | MVPCONTROL_VPC ); val = read_c0_mvpconf0(); nvpe = ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1; if (vpelimit > 0 && nvpe > vpelimit) nvpe = vpelimit; ntc = ((val & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1; if (ntc > NR_CPUS) ntc = NR_CPUS; if (tclimit > 0 && ntc > tclimit) ntc = tclimit; tcpervpe = ntc / nvpe; slop = ntc % nvpe; /* Residual TCs, < NVPE */ /* Set up shared TLB */ smtc_configure_tlb(); for (tc = 0, vpe = 0 ; (vpe < nvpe) && (tc < ntc) ; vpe++) { /* * Set the MVP bits. */ settc(tc); write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_MVP); if (vpe != 0) printk(", "); printk("VPE %d: TC", vpe); for (i = 0; i < tcpervpe; i++) { /* * TC 0 is bound to VPE 0 at reset, * and is presumably executing this * code. Leave it alone! */ if (tc != 0) { smtc_tc_setup(vpe,tc, cpu); cpu++; } printk(" %d", tc); tc++; } if (slop) { if (tc != 0) { smtc_tc_setup(vpe,tc, cpu); cpu++; } printk(" %d", tc); tc++; slop--; } if (vpe != 0) { /* * Clear any stale software interrupts from VPE's Cause */ write_vpe_c0_cause(0); /* * Clear ERL/EXL of VPEs other than 0 * and set restricted interrupt enable/mask. */ write_vpe_c0_status((read_vpe_c0_status() & ~(ST0_BEV | ST0_ERL | ST0_EXL | ST0_IM)) | (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP7 | ST0_IE)); /* * set config to be the same as vpe0, * particularly kseg0 coherency alg */ write_vpe_c0_config(read_c0_config()); /* Clear any pending timer interrupt */ write_vpe_c0_compare(0); /* Propagate Config7 */ write_vpe_c0_config7(read_c0_config7()); write_vpe_c0_count(read_c0_count()); } /* enable multi-threading within VPE */ write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() | VPECONTROL_TE); /* enable the VPE */ write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA); } /* * Pull any physically present but unused TCs out of circulation. */ while (tc < (((val & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1)) { cpu_clear(tc, phys_cpu_present_map); cpu_clear(tc, cpu_present_map); tc++; } /* release config state */ write_c0_mvpcontrol( read_c0_mvpcontrol() & ~ MVPCONTROL_VPC ); printk("\n"); /* Set up coprocessor affinity CPU mask(s) */ for (tc = 0; tc < ntc; tc++) { if (cpu_data[tc].options & MIPS_CPU_FPU) cpu_set(tc, mt_fpu_cpumask); } /* set up ipi interrupts... */ /* If we have multiple VPEs running, set up the cross-VPE interrupt */ setup_cross_vpe_interrupts(nvpe); /* Set up queue of free IPI "messages". */ nipi = NR_CPUS * IPIBUF_PER_CPU; if (ipibuffers > 0) nipi = ipibuffers; pipi = kmalloc(nipi *sizeof(struct smtc_ipi), GFP_KERNEL); if (pipi == NULL) panic("kmalloc of IPI message buffers failed\n"); else printk("IPI buffer pool of %d buffers\n", nipi); for (i = 0; i < nipi; i++) { smtc_ipi_nq(&freeIPIq, pipi); pipi++; } /* Arm multithreading and enable other VPEs - but all TCs are Halted */ emt(EMT_ENABLE); evpe(EVPE_ENABLE); local_irq_restore(flags); /* Initialize SMTC /proc statistics/diagnostics */ init_smtc_stats(); } /* * Setup the PC, SP, and GP of a secondary processor and start it * running! * smp_bootstrap is the place to resume from * __KSTK_TOS(idle) is apparently the stack pointer * (unsigned long)idle->thread_info the gp * */ void smtc_boot_secondary(int cpu, struct task_struct *idle) { extern u32 kernelsp[NR_CPUS]; long flags; int mtflags; LOCK_MT_PRA(); if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) { dvpe(); } settc(cpu_data[cpu].tc_id); /* pc */ write_tc_c0_tcrestart((unsigned long)&smp_bootstrap); /* stack pointer */ kernelsp[cpu] = __KSTK_TOS(idle); write_tc_gpr_sp(__KSTK_TOS(idle)); /* global pointer */ write_tc_gpr_gp((unsigned long)task_thread_info(idle)); smtc_status |= SMTC_MTC_ACTIVE; write_tc_c0_tchalt(0); if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) { evpe(EVPE_ENABLE); } UNLOCK_MT_PRA(); } void smtc_init_secondary(void) { /* * Start timer on secondary VPEs if necessary. * plat_timer_setup has already have been invoked by init/main * on "boot" TC. Like per_cpu_trap_init() hack, this assumes that * SMTC init code assigns TCs consdecutively and in ascending order * to across available VPEs. */ if (((read_c0_tcbind() & TCBIND_CURTC) != 0) && ((read_c0_tcbind() & TCBIND_CURVPE) != cpu_data[smp_processor_id() - 1].vpe_id)){ write_c0_compare (read_c0_count() + mips_hpt_frequency/HZ); } local_irq_enable(); } void smtc_smp_finish(void) { printk("TC %d going on-line as CPU %d\n", cpu_data[smp_processor_id()].tc_id, smp_processor_id()); } void smtc_cpus_done(void) { } /* * Support for SMTC-optimized driver IRQ registration */ /* * SMTC Kernel needs to manipulate low-level CPU interrupt mask * in do_IRQ. These are passed in setup_irq_smtc() and stored * in this table. */ int setup_irq_smtc(unsigned int irq, struct irqaction * new, unsigned long hwmask) { #ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG unsigned int vpe = current_cpu_data.vpe_id; vpemask[vpe][irq - MIPS_CPU_IRQ_BASE] = 1; #endif irq_hwmask[irq] = hwmask; return setup_irq(irq, new); } /* * IPI model for SMTC is tricky, because interrupts aren't TC-specific. * Within a VPE one TC can interrupt another by different approaches. * The easiest to get right would probably be to make all TCs except * the target IXMT and set a software interrupt, but an IXMT-based * scheme requires that a handler must run before a new IPI could * be sent, which would break the "broadcast" loops in MIPS MT. * A more gonzo approach within a VPE is to halt the TC, extract * its Restart, Status, and a couple of GPRs, and program the Restart * address to emulate an interrupt. * * Within a VPE, one can be confident that the target TC isn't in * a critical EXL state when halted, since the write to the Halt * register could not have issued on the writing thread if the * halting thread had EXL set. So k0 and k1 of the target TC * can be used by the injection code. Across VPEs, one can't * be certain that the target TC isn't in a critical exception * state. So we try a two-step process of sending a software * interrupt to the target VPE, which either handles the event * itself (if it was the target) or injects the event within * the VPE. */ static void smtc_ipi_qdump(void) { int i; for (i = 0; i < NR_CPUS ;i++) { printk("IPIQ[%d]: head = 0x%x, tail = 0x%x, depth = %d\n", i, (unsigned)IPIQ[i].head, (unsigned)IPIQ[i].tail, IPIQ[i].depth); } } /* * The standard atomic.h primitives don't quite do what we want * here: We need an atomic add-and-return-previous-value (which * could be done with atomic_add_return and a decrement) and an * atomic set/zero-and-return-previous-value (which can't really * be done with the atomic.h primitives). And since this is * MIPS MT, we can assume that we have LL/SC. */ static __inline__ int atomic_postincrement(unsigned int *pv) { unsigned long result; unsigned long temp; __asm__ __volatile__( "1: ll %0, %2 \n" " addu %1, %0, 1 \n" " sc %1, %2 \n" " beqz %1, 1b \n" " sync \n" : "=&r" (result), "=&r" (temp), "=m" (*pv) : "m" (*pv) : "memory"); return result; } void smtc_send_ipi(int cpu, int type, unsigned int action) { int tcstatus; struct smtc_ipi *pipi; long flags; int mtflags; if (cpu == smp_processor_id()) { printk("Cannot Send IPI to self!\n"); return; } /* Set up a descriptor, to be delivered either promptly or queued */ pipi = smtc_ipi_dq(&freeIPIq); if (pipi == NULL) { bust_spinlocks(1); mips_mt_regdump(dvpe()); panic("IPI Msg. Buffers Depleted\n"); } pipi->type = type; pipi->arg = (void *)action; pipi->dest = cpu; if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) { /* If not on same VPE, enqueue and send cross-VPE interupt */ smtc_ipi_nq(&IPIQ[cpu], pipi); LOCK_CORE_PRA(); settc(cpu_data[cpu].tc_id); write_vpe_c0_cause(read_vpe_c0_cause() | C_SW1); UNLOCK_CORE_PRA(); } else { /* * Not sufficient to do a LOCK_MT_PRA (dmt) here, * since ASID shootdown on the other VPE may * collide with this operation. */ LOCK_CORE_PRA(); settc(cpu_data[cpu].tc_id); /* Halt the targeted TC */ write_tc_c0_tchalt(TCHALT_H); mips_ihb(); /* * Inspect TCStatus - if IXMT is set, we have to queue * a message. Otherwise, we set up the "interrupt" * of the other TC */ tcstatus = read_tc_c0_tcstatus(); if ((tcstatus & TCSTATUS_IXMT) != 0) { /* * Spin-waiting here can deadlock, * so we queue the message for the target TC. */ write_tc_c0_tchalt(0); UNLOCK_CORE_PRA(); /* Try to reduce redundant timer interrupt messages */ if (type == SMTC_CLOCK_TICK) { if (atomic_postincrement(&ipi_timer_latch[cpu])!=0){ smtc_ipi_nq(&freeIPIq, pipi); return; } } smtc_ipi_nq(&IPIQ[cpu], pipi); } else { post_direct_ipi(cpu, pipi); write_tc_c0_tchalt(0); UNLOCK_CORE_PRA(); } } } /* * Send IPI message to Halted TC, TargTC/TargVPE already having been set */ static void post_direct_ipi(int cpu, struct smtc_ipi *pipi) { struct pt_regs *kstack; unsigned long tcstatus; unsigned long tcrestart; extern u32 kernelsp[NR_CPUS]; extern void __smtc_ipi_vector(void); /* Extract Status, EPC from halted TC */ tcstatus = read_tc_c0_tcstatus(); tcrestart = read_tc_c0_tcrestart(); /* If TCRestart indicates a WAIT instruction, advance the PC */ if ((tcrestart & 0x80000000) && ((*(unsigned int *)tcrestart & 0xfe00003f) == 0x42000020)) { tcrestart += 4; } /* * Save on TC's future kernel stack * * CU bit of Status is indicator that TC was * already running on a kernel stack... */ if (tcstatus & ST0_CU0) { /* Note that this "- 1" is pointer arithmetic */ kstack = ((struct pt_regs *)read_tc_gpr_sp()) - 1; } else { kstack = ((struct pt_regs *)kernelsp[cpu]) - 1; } kstack->cp0_epc = (long)tcrestart; /* Save TCStatus */ kstack->cp0_tcstatus = tcstatus; /* Pass token of operation to be performed kernel stack pad area */ kstack->pad0[4] = (unsigned long)pipi; /* Pass address of function to be called likewise */ kstack->pad0[5] = (unsigned long)&ipi_decode; /* Set interrupt exempt and kernel mode */ tcstatus |= TCSTATUS_IXMT; tcstatus &= ~TCSTATUS_TKSU; write_tc_c0_tcstatus(tcstatus); ehb(); /* Set TC Restart address to be SMTC IPI vector */ write_tc_c0_tcrestart(__smtc_ipi_vector); } static void ipi_resched_interrupt(void) { /* Return from interrupt should be enough to cause scheduler check */ } static void ipi_call_interrupt(void) { /* Invoke generic function invocation code in smp.c */ smp_call_function_interrupt(); } void ipi_decode(struct smtc_ipi *pipi) { void *arg_copy = pipi->arg; int type_copy = pipi->type; int dest_copy = pipi->dest; smtc_ipi_nq(&freeIPIq, pipi); switch (type_copy) { case SMTC_CLOCK_TICK: irq_enter(); kstat_this_cpu.irqs[MIPS_CPU_IRQ_BASE + cp0_compare_irq]++; /* Invoke Clock "Interrupt" */ ipi_timer_latch[dest_copy] = 0; #ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG clock_hang_reported[dest_copy] = 0; #endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */ local_timer_interrupt(0, NULL); irq_exit(); break; case LINUX_SMP_IPI: switch ((int)arg_copy) { case SMP_RESCHEDULE_YOURSELF: ipi_resched_interrupt(); break; case SMP_CALL_FUNCTION: ipi_call_interrupt(); break; default: printk("Impossible SMTC IPI Argument 0x%x\n", (int)arg_copy); break; } break; default: printk("Impossible SMTC IPI Type 0x%x\n", type_copy); break; } } void deferred_smtc_ipi(void) { struct smtc_ipi *pipi; unsigned long flags; /* DEBUG */ int q = smp_processor_id(); /* * Test is not atomic, but much faster than a dequeue, * and the vast majority of invocations will have a null queue. */ if (IPIQ[q].head != NULL) { while((pipi = smtc_ipi_dq(&IPIQ[q])) != NULL) { /* ipi_decode() should be called with interrupts off */ local_irq_save(flags); ipi_decode(pipi); local_irq_restore(flags); } } } /* * Send clock tick to all TCs except the one executing the funtion */ void smtc_timer_broadcast(void) { int cpu; int myTC = cpu_data[smp_processor_id()].tc_id; int myVPE = cpu_data[smp_processor_id()].vpe_id; smtc_cpu_stats[smp_processor_id()].timerints++; for_each_online_cpu(cpu) { if (cpu_data[cpu].vpe_id == myVPE && cpu_data[cpu].tc_id != myTC) smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0); } } /* * Cross-VPE interrupts in the SMTC prototype use "software interrupts" * set via cross-VPE MTTR manipulation of the Cause register. It would be * in some regards preferable to have external logic for "doorbell" hardware * interrupts. */ static int cpu_ipi_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_IRQ; static irqreturn_t ipi_interrupt(int irq, void *dev_idm) { int my_vpe = cpu_data[smp_processor_id()].vpe_id; int my_tc = cpu_data[smp_processor_id()].tc_id; int cpu; struct smtc_ipi *pipi; unsigned long tcstatus; int sent; long flags; unsigned int mtflags; unsigned int vpflags; /* * So long as cross-VPE interrupts are done via * MFTR/MTTR read-modify-writes of Cause, we need * to stop other VPEs whenever the local VPE does * anything similar. */ local_irq_save(flags); vpflags = dvpe(); clear_c0_cause(0x100 << MIPS_CPU_IPI_IRQ); set_c0_status(0x100 << MIPS_CPU_IPI_IRQ); irq_enable_hazard(); evpe(vpflags); local_irq_restore(flags); /* * Cross-VPE Interrupt handler: Try to directly deliver IPIs * queued for TCs on this VPE other than the current one. * Return-from-interrupt should cause us to drain the queue * for the current TC, so we ought not to have to do it explicitly here. */ for_each_online_cpu(cpu) { if (cpu_data[cpu].vpe_id != my_vpe) continue; pipi = smtc_ipi_dq(&IPIQ[cpu]); if (pipi != NULL) { if (cpu_data[cpu].tc_id != my_tc) { sent = 0; LOCK_MT_PRA(); settc(cpu_data[cpu].tc_id); write_tc_c0_tchalt(TCHALT_H); mips_ihb(); tcstatus = read_tc_c0_tcstatus(); if ((tcstatus & TCSTATUS_IXMT) == 0) { post_direct_ipi(cpu, pipi); sent = 1; } write_tc_c0_tchalt(0); UNLOCK_MT_PRA(); if (!sent) { smtc_ipi_req(&IPIQ[cpu], pipi); } } else { /* * ipi_decode() should be called * with interrupts off */ local_irq_save(flags); ipi_decode(pipi); local_irq_restore(flags); } } } return IRQ_HANDLED; } static void ipi_irq_dispatch(void) { do_IRQ(cpu_ipi_irq); } static struct irqaction irq_ipi = { .handler = ipi_interrupt, .flags = IRQF_DISABLED, .name = "SMTC_IPI", .flags = IRQF_PERCPU }; static void setup_cross_vpe_interrupts(unsigned int nvpe) { if (nvpe < 1) return; if (!cpu_has_vint) panic("SMTC Kernel requires Vectored Interupt support"); set_vi_handler(MIPS_CPU_IPI_IRQ, ipi_irq_dispatch); setup_irq_smtc(cpu_ipi_irq, &irq_ipi, (0x100 << MIPS_CPU_IPI_IRQ)); set_irq_handler(cpu_ipi_irq, handle_percpu_irq); } /* * SMTC-specific hacks invoked from elsewhere in the kernel. * * smtc_ipi_replay is called from raw_local_irq_restore which is only ever * called with interrupts disabled. We do rely on interrupts being disabled * here because using spin_lock_irqsave()/spin_unlock_irqrestore() would * result in a recursive call to raw_local_irq_restore(). */ static void __smtc_ipi_replay(void) { unsigned int cpu = smp_processor_id(); /* * To the extent that we've ever turned interrupts off, * we may have accumulated deferred IPIs. This is subtle. * If we use the smtc_ipi_qdepth() macro, we'll get an * exact number - but we'll also disable interrupts * and create a window of failure where a new IPI gets * queued after we test the depth but before we re-enable * interrupts. So long as IXMT never gets set, however, * we should be OK: If we pick up something and dispatch * it here, that's great. If we see nothing, but concurrent * with this operation, another TC sends us an IPI, IXMT * is clear, and we'll handle it as a real pseudo-interrupt * and not a pseudo-pseudo interrupt. */ if (IPIQ[cpu].depth > 0) { while (1) { struct smtc_ipi_q *q = &IPIQ[cpu]; struct smtc_ipi *pipi; extern void self_ipi(struct smtc_ipi *); spin_lock(&q->lock); pipi = __smtc_ipi_dq(q); spin_unlock(&q->lock); if (!pipi) break; self_ipi(pipi); smtc_cpu_stats[cpu].selfipis++; } } } void smtc_ipi_replay(void) { raw_local_irq_disable(); __smtc_ipi_replay(); } EXPORT_SYMBOL(smtc_ipi_replay); void smtc_idle_loop_hook(void) { #ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG int im; int flags; int mtflags; int bit; int vpe; int tc; int hook_ntcs; /* * printk within DMT-protected regions can deadlock, * so buffer diagnostic messages for later output. */ char *pdb_msg; char id_ho_db_msg[768]; /* worst-case use should be less than 700 */ if (atomic_read(&idle_hook_initialized) == 0) { /* fast test */ if (atomic_add_return(1, &idle_hook_initialized) == 1) { int mvpconf0; /* Tedious stuff to just do once */ mvpconf0 = read_c0_mvpconf0(); hook_ntcs = ((mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1; if (hook_ntcs > NR_CPUS) hook_ntcs = NR_CPUS; for (tc = 0; tc < hook_ntcs; tc++) { tcnoprog[tc] = 0; clock_hang_reported[tc] = 0; } for (vpe = 0; vpe < 2; vpe++) for (im = 0; im < 8; im++) imstuckcount[vpe][im] = 0; printk("Idle loop test hook initialized for %d TCs\n", hook_ntcs); atomic_set(&idle_hook_initialized, 1000); } else { /* Someone else is initializing in parallel - let 'em finish */ while (atomic_read(&idle_hook_initialized) < 1000) ; } } /* Have we stupidly left IXMT set somewhere? */ if (read_c0_tcstatus() & 0x400) { write_c0_tcstatus(read_c0_tcstatus() & ~0x400); ehb(); printk("Dangling IXMT in cpu_idle()\n"); } /* Have we stupidly left an IM bit turned off? */ #define IM_LIMIT 2000 local_irq_save(flags); mtflags = dmt(); pdb_msg = &id_ho_db_msg[0]; im = read_c0_status(); vpe = current_cpu_data.vpe_id; for (bit = 0; bit < 8; bit++) { /* * In current prototype, I/O interrupts * are masked for VPE > 0 */ if (vpemask[vpe][bit]) { if (!(im & (0x100 << bit))) imstuckcount[vpe][bit]++; else imstuckcount[vpe][bit] = 0; if (imstuckcount[vpe][bit] > IM_LIMIT) { set_c0_status(0x100 << bit); ehb(); imstuckcount[vpe][bit] = 0; pdb_msg += sprintf(pdb_msg, "Dangling IM %d fixed for VPE %d\n", bit, vpe); } } } /* * Now that we limit outstanding timer IPIs, check for hung TC */ for (tc = 0; tc < NR_CPUS; tc++) { /* Don't check ourself - we'll dequeue IPIs just below */ if ((tc != smp_processor_id()) && ipi_timer_latch[tc] > timerq_limit) { if (clock_hang_reported[tc] == 0) { pdb_msg += sprintf(pdb_msg, "TC %d looks hung with timer latch at %d\n", tc, ipi_timer_latch[tc]); clock_hang_reported[tc]++; } } } emt(mtflags); local_irq_restore(flags); if (pdb_msg != &id_ho_db_msg[0]) printk("CPU%d: %s", smp_processor_id(), id_ho_db_msg); #endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */ /* * Replay any accumulated deferred IPIs. If "Instant Replay" * is in use, there should never be any. */ #ifndef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY { unsigned long flags; local_irq_save(flags); __smtc_ipi_replay(); local_irq_restore(flags); } #endif /* CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY */ } void smtc_soft_dump(void) { int i; printk("Counter Interrupts taken per CPU (TC)\n"); for (i=0; i < NR_CPUS; i++) { printk("%d: %ld\n", i, smtc_cpu_stats[i].timerints); } printk("Self-IPI invocations:\n"); for (i=0; i < NR_CPUS; i++) { printk("%d: %ld\n", i, smtc_cpu_stats[i].selfipis); } smtc_ipi_qdump(); printk("Timer IPI Backlogs:\n"); for (i=0; i < NR_CPUS; i++) { printk("%d: %d\n", i, ipi_timer_latch[i]); } printk("%d Recoveries of \"stolen\" FPU\n", atomic_read(&smtc_fpu_recoveries)); } /* * TLB management routines special to SMTC */ void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu) { unsigned long flags, mtflags, tcstat, prevhalt, asid; int tlb, i; /* * It would be nice to be able to use a spinlock here, * but this is invoked from within TLB flush routines * that protect themselves with DVPE, so if a lock is * held by another TC, it'll never be freed. * * DVPE/DMT must not be done with interrupts enabled, * so even so most callers will already have disabled * them, let's be really careful... */ local_irq_save(flags); if (smtc_status & SMTC_TLB_SHARED) { mtflags = dvpe(); tlb = 0; } else { mtflags = dmt(); tlb = cpu_data[cpu].vpe_id; } asid = asid_cache(cpu); do { if (!((asid += ASID_INC) & ASID_MASK) ) { if (cpu_has_vtag_icache) flush_icache_all(); /* Traverse all online CPUs (hack requires contigous range) */ for (i = 0; i < num_online_cpus(); i++) { /* * We don't need to worry about our own CPU, nor those of * CPUs who don't share our TLB. */ if ((i != smp_processor_id()) && ((smtc_status & SMTC_TLB_SHARED) || (cpu_data[i].vpe_id == cpu_data[cpu].vpe_id))) { settc(cpu_data[i].tc_id); prevhalt = read_tc_c0_tchalt() & TCHALT_H; if (!prevhalt) { write_tc_c0_tchalt(TCHALT_H); mips_ihb(); } tcstat = read_tc_c0_tcstatus(); smtc_live_asid[tlb][(tcstat & ASID_MASK)] |= (asiduse)(0x1 << i); if (!prevhalt) write_tc_c0_tchalt(0); } } if (!asid) /* fix version if needed */ asid = ASID_FIRST_VERSION; local_flush_tlb_all(); /* start new asid cycle */ } } while (smtc_live_asid[tlb][(asid & ASID_MASK)]); /* * SMTC shares the TLB within VPEs and possibly across all VPEs. */ for (i = 0; i < num_online_cpus(); i++) { if ((smtc_status & SMTC_TLB_SHARED) || (cpu_data[i].vpe_id == cpu_data[cpu].vpe_id)) cpu_context(i, mm) = asid_cache(i) = asid; } if (smtc_status & SMTC_TLB_SHARED) evpe(mtflags); else emt(mtflags); local_irq_restore(flags); } /* * Invoked from macros defined in mmu_context.h * which must already have disabled interrupts * and done a DVPE or DMT as appropriate. */ void smtc_flush_tlb_asid(unsigned long asid) { int entry; unsigned long ehi; entry = read_c0_wired(); /* Traverse all non-wired entries */ while (entry < current_cpu_data.tlbsize) { write_c0_index(entry); ehb(); tlb_read(); ehb(); ehi = read_c0_entryhi(); if ((ehi & ASID_MASK) == asid) { /* * Invalidate only entries with specified ASID, * makiing sure all entries differ. */ write_c0_entryhi(CKSEG0 + (entry << (PAGE_SHIFT + 1))); write_c0_entrylo0(0); write_c0_entrylo1(0); mtc0_tlbw_hazard(); tlb_write_indexed(); } entry++; } write_c0_index(PARKED_INDEX); tlbw_use_hazard(); } /* * Support for single-threading cache flush operations. */ static int halt_state_save[NR_CPUS]; /* * To really, really be sure that nothing is being done * by other TCs, halt them all. This code assumes that * a DVPE has already been done, so while their Halted * state is theoretically architecturally unstable, in * practice, it's not going to change while we're looking * at it. */ void smtc_cflush_lockdown(void) { int cpu; for_each_online_cpu(cpu) { if (cpu != smp_processor_id()) { settc(cpu_data[cpu].tc_id); halt_state_save[cpu] = read_tc_c0_tchalt(); write_tc_c0_tchalt(TCHALT_H); } } mips_ihb(); } /* It would be cheating to change the cpu_online states during a flush! */ void smtc_cflush_release(void) { int cpu; /* * Start with a hazard barrier to ensure * that all CACHE ops have played through. */ mips_ihb(); for_each_online_cpu(cpu) { if (cpu != smp_processor_id()) { settc(cpu_data[cpu].tc_id); write_tc_c0_tchalt(halt_state_save[cpu]); } } mips_ihb(); }