config IRQCHIP
	def_bool y
	depends on OF_IRQ

config ARM_GIC
	bool
	select IRQ_DOMAIN
	select IRQ_DOMAIN_HIERARCHY
	select MULTI_IRQ_HANDLER
	select QCOM_SHOW_RESUME_IRQ

config ARM_GIC_V2M
	bool
	depends on ARM_GIC
	depends on PCI && PCI_MSI
	select PCI_MSI_IRQ_DOMAIN

config GIC_NON_BANKED
	bool

config ARM_GIC_V3
	bool
	select IRQ_DOMAIN
	select MULTI_IRQ_HANDLER
	select IRQ_DOMAIN_HIERARCHY

config ARM_GIC_V3_ITS
	bool
	select PCI_MSI_IRQ_DOMAIN

config ARM_GIC_V3_ACL
	bool "GICv3 Access control"
	depends on ARM_GIC_V3
	help
	  Access to GIC ITS address space is controlled by EL2.
	  Kernel has no permission to access ITS

config ARM_GIC_V3_NO_ACCESS_CONTROL
	bool "GICv3 No Access Control Configuration"
	depends on ARM_GIC_V3
	help
	  On some SOCs with the access control configurations it is
	  not allowed to access certain set of the GIC registers
	  from non-secure world. Provide a common flag to protect
	  those functionalities and compile them out for such
	  configurations, so that specific registers are not touched.

	  For production kernels, you should say 'N' here.

config ARM_NVIC
	bool
	select IRQ_DOMAIN
	select IRQ_DOMAIN_HIERARCHY
	select GENERIC_IRQ_CHIP

config ARM_VIC
	bool
	select IRQ_DOMAIN
	select MULTI_IRQ_HANDLER

config ARM_VIC_NR
	int
	default 4 if ARCH_S5PV210
	default 2
	depends on ARM_VIC
	help
	  The maximum number of VICs available in the system, for
	  power management.

config ATMEL_AIC_IRQ
	bool
	select GENERIC_IRQ_CHIP
	select IRQ_DOMAIN
	select MULTI_IRQ_HANDLER
	select SPARSE_IRQ

config ATMEL_AIC5_IRQ
	bool
	select GENERIC_IRQ_CHIP
	select IRQ_DOMAIN
	select MULTI_IRQ_HANDLER
	select SPARSE_IRQ

config I8259
	bool
	select IRQ_DOMAIN

config BCM7038_L1_IRQ
	bool
	select GENERIC_IRQ_CHIP
	select IRQ_DOMAIN

config BCM7120_L2_IRQ
	bool
	select GENERIC_IRQ_CHIP
	select IRQ_DOMAIN

config BRCMSTB_L2_IRQ
	bool
	select GENERIC_IRQ_CHIP
	select IRQ_DOMAIN

config QCOM_SHOW_RESUME_IRQ
	bool "Enable logging of interrupts that could have caused resume"
	depends on ARM_GIC
	default n
	help
	  This option logs wake up interrupts that have triggered just before
	  the resume loop unrolls. It helps to debug to know any unnecessary
	  wake up interrupts that causes system to come out of low power modes.
	  Say Y if you want to debug why the system resumed.

config DW_APB_ICTL
	bool
	select GENERIC_IRQ_CHIP
	select IRQ_DOMAIN

config IMGPDC_IRQ
	bool
	select GENERIC_IRQ_CHIP
	select IRQ_DOMAIN

config IRQ_MIPS_CPU
	bool
	select GENERIC_IRQ_CHIP
	select IRQ_DOMAIN

config CLPS711X_IRQCHIP
	bool
	depends on ARCH_CLPS711X
	select IRQ_DOMAIN
	select MULTI_IRQ_HANDLER
	select SPARSE_IRQ
	default y

config OR1K_PIC
	bool
	select IRQ_DOMAIN

config OMAP_IRQCHIP
	bool
	select GENERIC_IRQ_CHIP
	select IRQ_DOMAIN

config ORION_IRQCHIP
	bool
	select IRQ_DOMAIN
	select MULTI_IRQ_HANDLER

config RENESAS_INTC_IRQPIN
	bool
	select IRQ_DOMAIN

config RENESAS_IRQC
	bool
	select GENERIC_IRQ_CHIP
	select IRQ_DOMAIN

config ST_IRQCHIP
	bool
	select REGMAP
	select MFD_SYSCON
	help
	  Enables SysCfg Controlled IRQs on STi based platforms.

config TB10X_IRQC
	bool
	select IRQ_DOMAIN
	select GENERIC_IRQ_CHIP

config VERSATILE_FPGA_IRQ
	bool
	select IRQ_DOMAIN

config VERSATILE_FPGA_IRQ_NR
       int
       default 4
       depends on VERSATILE_FPGA_IRQ

config XTENSA_MX
	bool
	select IRQ_DOMAIN

config IRQ_CROSSBAR
	bool
	help
	  Support for a CROSSBAR ip that precedes the main interrupt controller.
	  The primary irqchip invokes the crossbar's callback which inturn allocates
	  a free irq and configures the IP. Thus the peripheral interrupts are
	  routed to one of the free irqchip interrupt lines.

config KEYSTONE_IRQ
	tristate "Keystone 2 IRQ controller IP"
	depends on ARCH_KEYSTONE
	help
		Support for Texas Instruments Keystone 2 IRQ controller IP which
		is part of the Keystone 2 IPC mechanism

config MIPS_GIC
	bool
	select MIPS_CM

config INGENIC_IRQ
	bool
	depends on MACH_INGENIC
	default y

config RENESAS_H8300H_INTC
        bool
	select IRQ_DOMAIN

config RENESAS_H8S_INTC
        bool
	select IRQ_DOMAIN

config IMX_GPCV2
	bool
	select IRQ_DOMAIN
	help
	  Enables the wakeup IRQs for IMX platforms with GPCv2 block

config IRQ_MXS
	def_bool y if MACH_ASM9260 || ARCH_MXS
	select IRQ_DOMAIN
	select STMP_DEVICE

config MSM_IRQ
	bool
	select IRQ_DOMAIN

config GOLDFISH_PIC
       bool "Goldfish programmable interrupt controller"
       depends on MIPS && (GOLDFISH || COMPILE_TEST)
       select IRQ_DOMAIN
       help
         Say yes here to enable Goldfish interrupt controller driver used
         for Goldfish based virtual platforms.