/* * ehci-omap.c - driver for USBHOST on OMAP3/4 processors * * Bus Glue for the EHCI controllers in OMAP3/4 * Tested on several OMAP3 boards, and OMAP4 Pandaboard * * Copyright (C) 2007-2013 Texas Instruments, Inc. * Author: Vikram Pandita * Author: Anand Gadiyar * Author: Keshava Munegowda * Author: Roger Quadros * * Copyright (C) 2009 Nokia Corporation * Contact: Felipe Balbi * * Based on "ehci-fsl.c" and "ehci-au1xxx.c" ehci glue layers * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include "ehci.h" #include /* EHCI Register Set */ #define EHCI_INSNREG04 (0xA0) #define EHCI_INSNREG04_DISABLE_UNSUSPEND (1 << 5) #define EHCI_INSNREG05_ULPI (0xA4) #define EHCI_INSNREG05_ULPI_CONTROL_SHIFT 31 #define EHCI_INSNREG05_ULPI_PORTSEL_SHIFT 24 #define EHCI_INSNREG05_ULPI_OPSEL_SHIFT 22 #define EHCI_INSNREG05_ULPI_REGADD_SHIFT 16 #define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8 #define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0 #define DRIVER_DESC "OMAP-EHCI Host Controller driver" static const char hcd_name[] = "ehci-omap"; /*-------------------------------------------------------------------------*/ struct omap_hcd { struct usb_phy *phy[OMAP3_HS_USB_PORTS]; /* one PHY for each port */ int nports; }; static inline void ehci_write(void __iomem *base, u32 reg, u32 val) { __raw_writel(val, base + reg); } static inline u32 ehci_read(void __iomem *base, u32 reg) { return __raw_readl(base + reg); } /* configure so an HC device and id are always provided */ /* always called with process context; sleeping is OK */ static struct hc_driver __read_mostly ehci_omap_hc_driver; static const struct ehci_driver_overrides ehci_omap_overrides __initdata = { .extra_priv_size = sizeof(struct omap_hcd), }; /** * ehci_hcd_omap_probe - initialize TI-based HCDs * * Allocates basic resources for this USB host controller, and * then invokes the start() method for the HCD associated with it * through the hotplug entry's driver_data. */ static int ehci_hcd_omap_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct usbhs_omap_platform_data *pdata = dev->platform_data; struct resource *res; struct usb_hcd *hcd; void __iomem *regs; int ret = -ENODEV; int irq; int i; struct omap_hcd *omap; if (usb_disabled()) return -ENODEV; if (!dev->parent) { dev_err(dev, "Missing parent device\n"); return -ENODEV; } /* For DT boot, get platform data from parent. i.e. usbhshost */ if (dev->of_node) { pdata = dev->parent->platform_data; dev->platform_data = pdata; } if (!pdata) { dev_err(dev, "Missing platform data\n"); return -ENODEV; } irq = platform_get_irq(pdev, 0); if (irq < 0) { dev_err(dev, "EHCI irq failed\n"); return -ENODEV; } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); regs = devm_ioremap_resource(dev, res); if (IS_ERR(regs)) return PTR_ERR(regs); /* * Right now device-tree probed devices don't get dma_mask set. * Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ if (!dev->dma_mask) dev->dma_mask = &dev->coherent_dma_mask; if (!dev->coherent_dma_mask) dev->coherent_dma_mask = DMA_BIT_MASK(32); hcd = usb_create_hcd(&ehci_omap_hc_driver, dev, dev_name(dev)); if (!hcd) { dev_err(dev, "Failed to create HCD\n"); return -ENOMEM; } hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); hcd->regs = regs; hcd_to_ehci(hcd)->caps = regs; omap = (struct omap_hcd *)hcd_to_ehci(hcd)->priv; omap->nports = pdata->nports; platform_set_drvdata(pdev, hcd); /* get the PHY devices if needed */ for (i = 0 ; i < omap->nports ; i++) { struct usb_phy *phy; /* get the PHY device */ if (dev->of_node) phy = devm_usb_get_phy_by_phandle(dev, "phys", i); else phy = devm_usb_get_phy_dev(dev, i); if (IS_ERR(phy)) { /* Don't bail out if PHY is not absolutely necessary */ if (pdata->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY) continue; ret = PTR_ERR(phy); dev_err(dev, "Can't get PHY device for port %d: %d\n", i, ret); goto err_phy; } omap->phy[i] = phy; if (pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_PHY) { usb_phy_init(omap->phy[i]); /* bring PHY out of suspend */ usb_phy_set_suspend(omap->phy[i], 0); } } pm_runtime_enable(dev); pm_runtime_get_sync(dev); /* * An undocumented "feature" in the OMAP3 EHCI controller, * causes suspended ports to be taken out of suspend when * the USBCMD.Run/Stop bit is cleared (for example when * we do ehci_bus_suspend). * This breaks suspend-resume if the root-hub is allowed * to suspend. Writing 1 to this undocumented register bit * disables this feature and restores normal behavior. */ ehci_write(regs, EHCI_INSNREG04, EHCI_INSNREG04_DISABLE_UNSUSPEND); ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret) { dev_err(dev, "failed to add hcd with err %d\n", ret); goto err_pm_runtime; } /* * Bring PHYs out of reset for non PHY modes. * Even though HSIC mode is a PHY-less mode, the reset * line exists between the chips and can be modelled * as a PHY device for reset control. */ for (i = 0; i < omap->nports; i++) { if (!omap->phy[i] || pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_PHY) continue; usb_phy_init(omap->phy[i]); /* bring PHY out of suspend */ usb_phy_set_suspend(omap->phy[i], 0); } return 0; err_pm_runtime: pm_runtime_put_sync(dev); err_phy: for (i = 0; i < omap->nports; i++) { if (omap->phy[i]) usb_phy_shutdown(omap->phy[i]); } usb_put_hcd(hcd); return ret; } /** * ehci_hcd_omap_remove - shutdown processing for EHCI HCDs * @pdev: USB Host Controller being removed * * Reverses the effect of usb_ehci_hcd_omap_probe(), first invoking * the HCD's stop() method. It is always called from a thread * context, normally "rmmod", "apmd", or something similar. */ static int ehci_hcd_omap_remove(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct usb_hcd *hcd = dev_get_drvdata(dev); struct omap_hcd *omap = (struct omap_hcd *)hcd_to_ehci(hcd)->priv; int i; usb_remove_hcd(hcd); for (i = 0; i < omap->nports; i++) { if (omap->phy[i]) usb_phy_shutdown(omap->phy[i]); } usb_put_hcd(hcd); pm_runtime_put_sync(dev); pm_runtime_disable(dev); return 0; } static const struct of_device_id omap_ehci_dt_ids[] = { { .compatible = "ti,ehci-omap" }, { } }; MODULE_DEVICE_TABLE(of, omap_ehci_dt_ids); static struct platform_driver ehci_hcd_omap_driver = { .probe = ehci_hcd_omap_probe, .remove = ehci_hcd_omap_remove, .shutdown = usb_hcd_platform_shutdown, /*.suspend = ehci_hcd_omap_suspend, */ /*.resume = ehci_hcd_omap_resume, */ .driver = { .name = hcd_name, .of_match_table = omap_ehci_dt_ids, } }; /*-------------------------------------------------------------------------*/ static int __init ehci_omap_init(void) { if (usb_disabled()) return -ENODEV; pr_info("%s: " DRIVER_DESC "\n", hcd_name); ehci_init_driver(&ehci_omap_hc_driver, &ehci_omap_overrides); return platform_driver_register(&ehci_hcd_omap_driver); } module_init(ehci_omap_init); static void __exit ehci_omap_cleanup(void) { platform_driver_unregister(&ehci_hcd_omap_driver); } module_exit(ehci_omap_cleanup); MODULE_ALIAS("platform:ehci-omap"); MODULE_AUTHOR("Texas Instruments, Inc."); MODULE_AUTHOR("Felipe Balbi "); MODULE_AUTHOR("Roger Quadros "); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL");